PL 009-010December 2009

Parts List

I/A Series® Electronic Pressure Transmitters—

IGP10-...K, IGP10-...G, and IGP10-...HHigh Gauge Pressure Transmitters

for the Following Electronic Versions:

IGP10-D, -F, and -T Digital Gauge Pressure Transmittersand

IGP10-A and -V Analog Gauge Pressure Transmitters—

Style A

*Parts preceded by an asterisk are recommended spare parts.Give Instrument Model Number and Style when ordering.

See Recommended Spare Parts Summary section for quantities.

TO ORDER PARTS, CALL INVENSYS SYSTEMS INC. AT 1-866-746-6477.

PL 009-010Page 2

MODEL CODE

IGP10 Series for High Gauge Pressure Measurement (a)Description ModelI/A Series, Electronic, Direct Connected, High Gauge Pressure Transmitter IGP10

Electronics Versions and Output SignalIntelligent; Digital FoxCom and 4 to 20 mA dc, Configurable (Version –D) –DIntelligent; Digital HART and 4 to 20 mA (Version –T) –TIntelligent; Digital FOUNDATION fieldbus (Version –F) –FElectronic; 4 to 20 mA Analog Output, (Version –A) –AElectronic; 1 to 5 V dc Analog Output, Low Power (Version –V) –V

Structure Code – Process Connection, Sensor, and Fill FluidConnectionMaterial

Diaphragm Material

Fill Fluid

ConnectionType Used with:

15-5 ss 15-5 ss None 1/4 NPT, Internal Span Limit Code G only 24Inconel X-750 Inconel X-750 None 1/4 NPT, Internal Span Limit Code G only 2613-8 Moly ss 13-8 Moly ss None Autoclave F-250-C (b) Span Limit Code H only 28

Span Limits – Gauge Pressure UnitsMPa psi bar or kg/cm2 Used with17 and 52 2500 and 7500 175 and 525 Structure Codes 24 and 26 only K35 and 105 5000 and 15 000 350 and 1050 Structure Codes 24 and 26 only G70 and 210 10 000 and 30 000 700 and 2100 Structure Code 28 only H

Conduit Connection and Housing Material1/2 NPT Conduit Connection, Both Sides, Aluminum HousingPG 13.5 Conduit Connection, Both Sides, Aluminum Housing (with Electrical Safety Codes E, M, and N only)1/2 NPT Conduit Connection, Both Sides, 316 ss HousingPG 13.5 Conduit Connection, Both Sides, 316 ss Housing (with Electrical Safety Codes E, M, and N only)M20 Conduit Connection, Both Sides, Aluminum Housing (with Electrical Safety Codes E, M, and N only)M20 Conduit Connection, Both Sides, 316 ss Housing (with Electrical Safety Codes E, M, and N only)

123456

Electrical SafetyATEX Certifications as follows:

Version D; EEx ia IIC, Zone 0; or EEx ib IIC, Zone 0 and 1Version F; FISCO EEx ia IIC, Zone 0Version T; EEx ia IIC, Zone 0

ATEX Certifications as follows:Versions D and T; EEx nL IIC, Zone 2Version F; FNICO EEx nL IIC, Zone 2

ATEX Certifications as follows: Versions D and T; Multiple Certifications, includes ATEX Codes E and N.

CSA Certifications as follows:

E

N

M

C

FM Approvals as follows:

F

Model Code Continued on next page.

DescriptionElectronic Version

A D F T VIntrinsically Safe; Division 1 X XExplosionproof, Dust-ignitionproof; Division 1 X X X X XSuitable for Class I, II, III; Division 2 X X X X XZone Certified: Ex ia IIC; Ex nA II X X XFISCO, Class I, II, III, Division 1 XFNICO, Class I, II, III, Division 2 X

DescriptionElectronic Version

A D F T VIntrinsically Safe; Division 1 X X XExplosionproof, Dust-ignitionproof; Division 1 X X X X XNonincendive for Division 2 X X X X XZone Approved: AEx ia IIC X X XFISCO, Class I, II, III, Division 1 XFNICO, Class I, II, III, Division 2 X

PL 009-010Page 3

(a) Refer to PSSs 2A-1C13A to 2A-1C13 E for gauge pressure transmitters with span limits less than 52 MPa (7500 psi).Refer to PSS 2A-1C13K for IGP10 Transmitters with Sanitary Process Connections.Refer to PSS 2A-1C13L for IGP10 Transmitters with Pulp and Paper Process Connections.

(b) Autoclave F-250-C Connection with a 9/16-18 internal gland thread.(c) Available with Electrical Safety Codes E, M, and N only.(d) Available with Electrical Safety Code E only.(e) Not available with Span Limit Code H.(f) Autoclave Connection is not available with Span Limit Code H (Because it is Standard Construction on Code H).

Electrical Safety (Cont.)IECEx certified FISCO Ex ia IIC; Version FIECEx certified FNICO Ex nL IIC; version F

TU

Multi-marked for ATEX, CSA, and FM Intrinsically Safe Applications (with Electronic Version -T/HART only) W

Optional SelectionsRefer to descriptions that follow:

Mounting Bracket SetPainted Steel Bracket with Plated Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only)Stainless Steel Bracket with Stainless Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only)Painted Steel Bracket with Plated Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only)Stainless Steel Bracket with Stainless Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only)Painted Steel Bracket with Plated Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only)Stainless Steel Bracket with Stainless Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only)

-M1-M2-M3-M4-M5-M6

Digital Indicator with Pushbuttons or Solid (Blind) Cover over Standard IndicatorDigital Indicator, Pushbuttons, and Window Cover (Electronics Versions -D, -F, and -T only)Substitute Solid (Blind) Cover over Standard Indicator (Electronics Versions -A and -V only)

-L1-L2

Conduit ConnectorsHawke-Type 1/2 NPT Cable Gland for use with Conduit Connection Codes 1 and 3 (c)Plastic PG 13.5 Cable Gland for use with Conduit Connection Codes 2 and 4 (d)M20 Conduit Thread Adapter for use with Conduit Connection Codes 1 and 3 (c)Brass PG 13.5 Cable Gland (Trumpet-Shaped) for use w/Conduit Connection Codes 2 and 4 (d)

-A1-A2-A3-A4

Electronics Housing FeaturesExternal Zero AdjustmentCustody Transfer Lock and SealExternal Zero Adjustment and Custody Transfer Lock and Seal

-Z1-Z2-Z3

Custom Factory ConfigurationDigital Output (4 to 20 mA Default if not selected) - Electronics Version -D onlyFull Factory Configuration (Requires Configuration Form to be filled out)

-C1-C2

Process ConnectionsG 1/2 Form B, External Thread (e)Autoclave F-250-C (with Span Limit Code G only) (f)1/2 NPT External Thread (e)

-G-G1-G2

SIL2 Transmitters for HART Versions OnlySIL2-Certified HART Transmitters -S2

Instruction Books (Common MI, Brochure, and Full Documentation Set on CD-ROM is Standard)Without Instruction Book and CD (“Getting Started” document only provided) -K1

Miscellaneous Optional SelectionsLow Temperature Operative Limits extended down to -50°C (-58°F)Supplemental Customer Tag (Stainless Steel Tag wired onto Transmitter)

-J-T

MODEL CODE (Cont.)

IGP10 Series for High Gauge Pressure Measurement (Cont.) (a)Description Model

PL 009-010Page 4

TRANSMITTER ASSEMBLY (Figure 1)

Item Part No. Qty. Part Name1 Tables 1 and 2 2 Cover, Electronics Housing

2 X0118CC 1 Grease, Lubriplate (1-3/4 ounce tube)

*3 X0201FC 2 O-Ring, Cover

4 Below 4 Screw, Terminal Block Assy, 0.138-32 x 0.750X0133UW Steel Screw - used with Aluminum HousingX0133VP 316 ss Screw - used with 316 ss Housing

5 Below 1 Terminal Block AssemblyD0149YB Electronics Versions -A, -D, and -TD0149HN Electronics Versions -FD0149FE Electronics Version -V

6 P0177JE 1 Cable, Power, Replaceable (Versions -F and -V only)

7 D0162VJ 2 Screw Assembly, Earth (Ground), 0.164-32 x 0.750

8 X0144KR 1 O-Ring, Terminal Block Assembly

9 Below 1 Pipe Plug for Unused Housing Conduit Connection – see WARNINGB0139CA Pipe Plug, Aluminum, 1/2 NPT; with Housing Code 1B0139SK Pipe Plug, 316 ss, 1/2 NPT; with Housing Code 3X0178GT Pipe Plug, 316 ss, PG 13.5; with Housing Codes 2 and 4D0179FJ Pipe Plug, Aluminum, M20; with Housing Code 5D0179FK Pipe Plug, 316 ss, M20; with Housing Code 6

1*3

2

416

65

87 9

13

FOR CODE -A or -V

17

31 2

10

76

2

15

213

15

1314

ELECTRONICS MODULECODE -D, -F, or -T (SEE FIGURE 3 FOR OPTIONAL LCD INDICATOR)

ELECTRONICS MODULECODE -A or -V(INCLUDES LCDINDICATOR)

(WINDOW COVER)

(SOLID COVER)

1210

18

SEEFIGURE 2

SCREW LOCK FOROPTIONAL CUSTODYTRANSFER LOCK ANDAND SEAL. ALSOSEE FIGURE 4.

ALWAYS ASOLID COVERON THIS END

PL 009-010Page 5

TRANSMITTER ASSEMBLY (Figure 1) (Cont.)

(a) Option -L2 replaces the standard window cover (for standard LCD indicator) with a blind solid cover.(b) Blind (solid) cover.(c) Standard window cover with standard LCD indicator.

(a) Option -L1 provides the user with an LCD indicator along with a window cover.(b) Blind (solid) cover.(c) Optional window cover with optional LCD indicator.

! WARNINGTo maintain IP66 (IEC 529) and NEMA 4X protection, unused conduit opening must be closed with a metal plug. In addition, the threaded housing covers must be properly installed.

NOTE1. The replacement sensor assembly varies with structure code, span limit code, maximum

span, and process connection. Refer to Figure 2 for part numbers of these variousconfigurations.

2. For Optional Selections -L1, -Z2, -M1 to -M6, -A1 to -A4, and -S2, see pages that follow.

Item Part No. Qty. Part Name*10 Below 1 Electronics Module

D0162VR Digital FoxCom and/or 4 to 20 mA (Version -D)D0162UU Digital FOUNDATION Fieldbus, FISCO Compliant (Version -F)D0162VZ Digital HART and 4 to 20 mA (Version -T)D0162ZP Analog 4 to 20 mA (Version -A)D0162ZX Analog 1 to 5 V dc, Low Power (Version -V)

11 – – Item 11 is intentionally not used*12 Figure 2 1 Replacement Sensor Assembly - see Note 1

13 D0162WM 2 Screw, Lock, 0.164-32(Part of Optional Selection -Z2; see Figure 4)

14 S0102BT 1 Plug, Poly (Remove prior to Transmitter Installation

15 Below 2 Screw, Captive, Pan Head, 0.138-32 x 0.615D0162VM Steel Screw - used with Aluminum HousingD0166CY 316ss Screw - used with 316 ss Housing

16 D0162WS 1 HHT Plug, Analog (Versions -A or -V)17 X0173YA 1 Washer, Ext. Ground, 0.196 ID, 0.383 OD18 X0201FW 2 Button

Table 1. Housing Covers (Item 1) for Electronics Versions -A and -V (Analog)

Option -L2See Note (a)

Part Numbers for Electronics Housing covers

Aluminum Housing Stainless Steel Housing

Field Wiring End Electronics End Field Wiring End Electronics EndNO D0162AP (b) D0162LG (c) D0162VD (b) D0162VG (c)YES D0162AP (b) D0162AP (b) D0162VD (b) D0162VD (b)

Table 2. Housing Covers (Item 1) for Electronics Versions -D, -F, and -T (Digital)

Option -L1See Note (a)

Part Numbers for Electronics Housing covers

Aluminum Housing Stainless Steel Housing

Field Wiring End Electronics End Field Wiring End Electronics EndNO D0162AP (b) D0162AP (b) D0162VD (b) D0162VD (b)YES D0162AP (b) D0162LH (c) D0162VD (b) D0162VH (c)

PL 009-010Page 6

REPLACEMENT SENSOR ASSEMBLY (Figure 2)(Item 12 of Figure 1)

Replacement Sensor Assembly

ReplacementPart

Number (a)

ReferenceModel

Number (a)(b) Maximum Span Process Connection (b)

D0179GP IGP10–.24K.. 52 MPa (7500 psi) 1/4 NPT Internal Thread, StandardD0179GQ IGP10–.24K..–G 52 MPa (7500 psi) G 1/2 Form B External Thread, OptionalD0179GR IGP10–.24K..–G1 52 MPa (7500 psi) Autoclave F-250-C, OptionalD0179GN IGP10–.24K..–G2 52 MPa (7500 psi) 1/2 NPT External Thread, OptionalD0175XN IGP10–.24G.. 105 MPa (15 000 psi) 1/4 NPT Internal Thread, StandardD0175XP IGP10–.24G..–G 105 MPa (15 000 psi) G 1/2 Form B External Thread, OptionalD0175XQ IGP10–.24G..–G1 105 MPa (15 000 psi) Autoclave F-250-C, OptionalD0179GL IGP10–.24G..–G2 105MPa (15 000 psi) 1/2 NPT External Thread, OptionalD0179GT IGP10–.26K.. 52 MPa (7500 psi) 1/4 NPT Internal Thread, StandardD0179GU IGP10–.26K..–G 52 MPa (7500 psi) G 1/2 Form B External Thread, OptionalD0179GV IGP10–.26K..–G1 52 MPa (7500 psi) Autoclave F-250-C, OptionalD0179GS IGP10–.26K..–G2 52 MPa (7500 psi) 1/2 NPT External Thread, OptionalD0175XR IGP10–.26G.. 105 MPa (15 000 psi) 1/4 NPT Internal Thread, StandardD0175XS IGP10–.26G..–G 105 MPa (15 000 psi) G 1/2, Form B, External Thread, OptionalD0175XT IGP10–.26G..–G1 105 MPa (15 000 psi) Autoclave F-250-C, OptionalD0179GM IGP10–.26G..–G2 105 MPa (15 000 psi) 1/2 NPT External Thread, OptionalD0175XU IGP10–.28H.. 210 MPa (30 000 psi) Autoclave F-250-C, Standard

(a) The dots (.) indicate that the sensor assembly listed can be used with all of the electronic versions, conduit connections/housing materials, and electrical safety codes listed. See Model Code.

(b) The -G option provides a G 1/2 Form B external thread process connection integral with the sensor assembly; and the -G1 option provides an Autoclave F-250-C process connection integral with the sensor assembly, and the -G2 option provides a 1/2 NPT external thread process connection integral with the sensor assembly. Note that a 1/4 NPT internal thread is the standard process connection with Structure Codes 24 and 26, and that the Autoclave F-250-C is the standard process connection with Structure Code 28.

1/4 NPTINTERNALTHREAD

AUTOCLAVE F-250-CINTERNAL

CONNECTION

1/2 NPTEXTERNAL

THREAD

G 1/2 B, FORM BEXTERNAL

THREAD

STANDARD -G OPTION -G1 OPTION -G2 OPTION

PL 009-010Page 7

OPTIONAL LIQUID CRYSTAL DISPLAY (LCD) INDICATOR ASSEMBLY (Figure 3)Optional Selection -L1

(for Electronics Version Codes -D, -F, and -T only)

OPTIONAL CUSTODY TRANSFER LOCK AND SEAL (Figure 4)Optional Selection -Z2

Item Part No. Qty. Part Name

1 Below 1 Cover Assembly with Window - used with LCD IndicatorD0162LH Aluminum Cover AssemblyD0162VH Stainless Steel Cover Assembly

*2 D0162LQ 1 Indicator Module3 X0118CC A/R Grease, Lubriplate (1-3/4 ounce tube)4 P0177HB 1 Indicator Cable5 0048130 A/R Grease, Silicone (150 gram tube)

Item Part No. Qty. Part Name

1 S001806 2 Lead Seal2 D0162WM 2 Screw, Lock, 0.164-323 X0118CC A/R Grease, Lubriplate (1-3/4 ounce tube)

4 S001807 A/R Sealing Wire

1

3

2

5

4

WINDOW COVERREPLACES SOLIDCOVER WHENLCD INDICATORIS USED.

NOTE

1

2

2

3

34

PL 009-010Page 8

OPTIONAL PIPE MOUNTING BRACKET SETS (Figure 5)Optional Selections -M1, -M2, -M3, -M4, -M5, and -M6

Optional Selections -M1, -M3, and -M5 (Painted Steel)

Item Part No. Qty. Part Name– Below – Mounting Bracket Set; Options -M1, -M3, and -M5

B0188DL Option -M1, Aluminum Housing; 1/2 NPT ConnectionsB0166AP Option -M3, Aluminum Housing; PG 13.5 ConnectionsB0179FN Option -M5, Aluminum Housing; M20 Connections

1 N0141ZW 1 Bracket, Mounting, painted steel2 D0114SM 1 U-Bolt, Steel3 0011962 2 Nut, Hex Head, plated cs, 0.312-18

4 Below 1 Adapter PlugB0188DN 1/2 NPT to 0.375-24, ss, Option -M1D0166AM PG 13.5 to 0.375-24, ss, Option -M3B0179FM M20 to 0.375-24, ss, Option -M5

5 X0116FB 1 Screw, Hex Head, plated cs, 0.375-24 x 0.625

Optional Selection -M2, -M4, and -M6 (Stainless Steel)

Item Part No. Qty. Part Name– Below – Mounting Bracket Set; Options -M2, -M4, and -M6

N1207AE Option -M2, 316 ss Housing; 1/2 NPT ConnectionsD0166AN Option -M4, 316 ss Housing; PG 13.5 ConnectionsB0179FP Option -M6, 316 ss Housing; M20 Connections

1 N1205MF 1 Bracket, Mounting, stainless steel2 N1205MX 1 U-Bolt, stainless steel3 Z1217HV 2 Nut, Hex Head, ss, 0.312-18

4 Below 1 Adapter PlugB0188DN 1/2 NPT to 0.375-24, ss, Option -M2D0166AM PG 13.5 to 0.375-24, ss, Option -M4B0179FM M20 to 0.375-24, ss, Option -M6

5 P0120RM 1 Screw, Hex Head, ss, 0.375-24 x 0.625

4VERTICAL PIPE MOUNTING

5 1

3

2

HORIZONTALPIPE MOUNTING

TRANSMITTER(REFERENCE)

PL 009-010Page 9

OPTIONAL CONDUIT CONNECTIONS (Figure 6)Optional Selections -A1, -A2, -A3, and -A4

Item Part No. Qty. Part Name

1 N7141HX 1 Hawke-Type Cable Gland (for 1/2 NPT)2 N7141DX 1 Nylon Cable Gland (for PG 13.5)3 X0178GU 1 Metric Conduit Thread Connection, M20/20 mm (for 1/2 NPT)4 N7141DW 1 Plated Brass Cable Gland (for PG 13.5)

CABLEGLAND

1/2 NPT

CABLEGLAND

PG 13.5

CABLEGLAND

PG 13.5

M20

(-A1) (-A4)(-A3)(-A2)

1/2 NPT

BRASS CABLEGLAND (PG 13.5)

HAWKE-TYPE CABLEGLAND (1/2 NPT)

NYLON CABLEGLAND (PG 13.5)

M20 CONDUITCONNECTION (1/2 NPT)

1 2 3 4

PL 009-010Page 10

OPTIONAL SIL2 TRANSMITTER FOR HART VERSIONS (Figure 7)Optional Selection -S2

NOTE1. A solid cover on the electronics end of the housing is shown. When the LCD Indicator Option

(Option -L1) is selected, a window cover is provided as shown in Figure 3.2. SIL2 Transmitters are available with HART versions. A SIL2 Kit comprises a terminal block

assembly, a characterized HART electronics module (with label), and instructions. Replacement of SIL2 Option -S2 must be performed using the SIL2 kit.

Item Part No. Qty. Part Name1 Below 2 Cover, Electronics Housing (Note 1)

B0162AP Solid Cover, AluminumB0162VD Solid Cover, Stainless Steel

2 X0118CC 1 Grease, Lubriplate; 1 3/4 ounce Tube3 X0201FC 2 O-Ring, Cover

4 Below 4 Screw, Terminal Block Assy; 0.138-32 x 0.750X0133UW Steel Screw used with Aluminum HousingX0133VP 316 ss Screw used with 316 ss Housing

5 Below 2 Screw, Captive, Panhd; 0.118-32 x 0.615D0162VM Steel Screw used with Aluminum HousingD0166CY 316 ss Screw used with 316 ss Housing

6 X0144KR 1 O-Ring, Terminal Block7 D0197FP 1 SIL2 Kit for SIL2-Certified HART Versions only (Note 2)

13

2

4

6

5

213

5

(SOLID COVERSHOWN)

7 OPTION -S2

SEE FIGURE 1FOR OTHER PARTS

PL 009-010Page 11

RECOMMENDED SPARE PARTS SUMMARY

FigureNumber

ItemNumber

PartNumber Part Name

Number of Parts Recommended for

1Inst.

5Inst.

20Inst.

1 3 X0201FC O-Ring, Cover 0 2 410 Below

D0162VRD0162UUD0162VZD0162ZPD0162ZX

Electronics ModuleDigital FoxCom and/or 4 to 20 mA (Version -D)Digital FOUNDATION Fieldbus, FISCO Compliant (Version -F)Digital HART and 4 to 20 mA (Version -T)Analog 4 to 20 mA (Version -A)Analog 1 to 5 V dc, Low Power (Version -V)

0 1 1

12 (Also see

Figure 2)

Below

D0179GPD0179GQD0179GRD0179GND0175XND0175XPD0175XQD0179GLD0179GTD0179GUD0179GVD0179GSD0175XRD0175XSD0175XTD0179GMD0175XU

Replacement Sensor AssemblyMaximum Structure ProcessSpan Code (a) Connection (a)52 MPa (7500 psi) 24, Std. 1/4 NPT, Internal52 MPa (7500 psi) 24, -G G 1/2, Form B, External52 MPa (7500 psi) 24, -G1 Autoclave F-250-C52 MPa (7500 psi) 24, -G2 1/2 NPT, External105 MPa (15 000 psi) 24, Std. 1/4 NPT, Internal105 MPa (15 000 psi) 24, -G G 1/2, Form B, External105 MPa (15 000 psi) 24, -G1 Autoclave F-250-C105 MPa (15 000 psi) 24, -G2 1/2 NPT, External52 MPa (7500 psi) 26, Std. 1/4 NPT, Internal52 MPa (7500 psi) 26, -G G 1/2, Form B, External52 MPa (7500 psi) 26, -G1 Autoclave F-250-C52 MPa (7500 psi) 26, -G2 1/2 NPT, External105 MPa (15 000 psi) 26, Std. 1/4 NPT, Internal105 MPa (15 000 psi) 26, -G G 1/2, Form B, External105 MPa (15 000 psi) 26, -G1 Autoclave F-250-C105 MPa (15 000 psi) 26, -G2 1/2 NPT, External210 MPa (30 000 psi) 28, Std. Autoclave F-250-C

0 1 1

7 7 D0197FP SIL Kit for SIL-Certified HART Transmitters 0 1 1(a)The 1/4 NPT internal thread process connection is standard with Structure Codes 24 and 26.

The Autoclave F-250-C process connection is standard with Structure Code 28.The G 1/2 Form B external thread process connection is optional (Option -G) with Structure Codes 24 and 26.The Autoclave F-250-C is optional (Option -G1) with Structure Codes 24 and 26.The 1/2 NPT external thread is optional (Option -G2) with Structure Codes 24 and 26.

PL 009-010Page 12

IPS Corporate Headquarters5601 Granite Parkway Suite 1000Plano, TX 75024www.ips.invensys.com

Foxboro Global Client SupportInside U.S.: 1-866-746-6477Outside U.S.: 1-508-549-2424 or contact your local Foxboro representative.Facsimile: 1-508-549-4999

Invensys, Foxboro, I/A Series, FoxCom, and IPS Logo are trademarks of Invensys plc, its subsidiaries, and affiliates.All other brand names may be trademarks of their respective owners.

Copyright 2000-2009 Invensys Systems, Inc.All rights reserved

MB 150 Printed in U.S.A. 1209