Parts Catalog - Lastec · LasTec Articulator Model 325EFD98 Parts Catalog Manual Part Number:...

LasTec ArticulatorModel 325EFD98

Parts CatalogManual Part Number: Man-325EFD98

LasTec8180 West 10th StreetIndianapolis, IN 46214

Phone (317) 273-1122 Fax (317) 271-4223Toll-Free (800) 515-6798 http://www.lastec.com

Table of Contents Page

Table of Contents EFD98masterdoc101900 3

SECTION 1: MOUNTING HARDWARE & DRIVE SYSTEM 1

1.1 Mounting Hardware ......................................................................................... 21.2 Gearbox Assembly .......................................................................................... 31.3 Drive Belt Idler Assembly ................................................................................ 4

SECTION 2: CUTTING DECKS 1

2.1 Deck Pivot & Trap Door Assemblies ............................................................... 22.2 Deck EFD1 & EFD3 Spindle Housing Assemblies.......................................... 32.3 Deck EFD2 Spindle Housing Assembly .......................................................... 42.4 Deck Belts & Covers ....................................................................................... 52.5 Deck EFD1 Idler Pulley Assembly................................................................... 62.6 Deck EFD3 Idler Pulley Assembly................................................................... 72.7 Grass Chute & Mulching Plate Assemblies..................................................... 82.8 Deck Locking Chain Assembly........................................................................ 92.9 Decks & Decals ............................................................................................. 10

SECTION 3: WHEELS 1

3.1 Deck EFD1 Rocker Leg Assembly .................................................................. 23.2 Deck EFD3 Rocker Leg Assembly .................................................................. 43.3 Front Axle Assembly ....................................................................................... 63.4 Rear Axle Assembly ........................................................................................ 73.5 Left & Right Swivel Wheel Yoke Assemblies .................................................. 83.6 9” x 3.5” Wheel Assemblies, Pneumatic & Foam-Filled .................................. 9

Go to www.lastec.com for latest changes in this manual.

Mounting Hardware & Drive System

Mounting Hardware & Drive System EFD98masterdoc101900 1-1

1

SECTION 1: MOUNTING HARDWARE & DRIVE SYSTEM


Mounting Hardware & Drive SystemMounting Hardware1

1-2 EFD98masterdoc110700 Mounting Hardware & Drive System

FIG. 1-1

1.1 Mounting HardwareRef. No. Part No. Part Description

1 019948 Lift Arm Weldment, Left

2 019947 Lift Arm Weldment, Right

3 P122 Clevis Pin, 3/4” x 4 1/2”

4 F05014-5 Bolt, 1”-8 x 3 3/4”

5 F05010-109 Nut, Nylock, 1”-8

6 P104 Grease Zerk, 1/4-28 Straight

NOT SHOWN P763 PTO Shaft, 26”

P763-CE PTO Shaft, 26”, CE Certified

NOT SHOWN P777 PTO Shaft, 35”


45

5

6

64

1

2EFD001

3


Mounting Hardware & Drive SystemGearbox Assembly

Mounting Hardware & Drive System EFD98masterdoc110700 1-3

1

FIG. 1-2

1.2 Gearbox AssemblyRef. No. Part No. Part Description

1 P746 Gearbox, CM215AR11

2 029632 PTO Guard

3 019857 Belt, Insta-Power BL35.5F

4 019772 Pulley, Drive, 2BK70H

5 019773 1

1 The 019773 Split Taper Bushing includes the F05009-68 Bolts.

Bushing, Split Taper, 7/8-H

6 P806 Key, Woodruff, 3/16” x 3/4”, #9

7 F05009-68 Bolt, 1/4-20 x 3/4”, BO

8 F05007-87 Bolt, 3/8-16 x 1”

9 F05011-4 Washer, Split Lock, 3/8”

NOT SHOWNP763 PTO Shaft, 26”


NOT SHOWN 019597 Seal, Gearbox Input Shaft, Curtis

NOT SHOWN 019598 Seal, Gearbox Output Shaft, Curtis

4

6

7

1

2

3

EFD002

5

89


Mounting Hardware & Drive SystemDrive Belt Idler Assembly1

1-4 EFD98masterdoc072501 Mounting Hardware & Drive System

fig. 1-3

1.3 Drive Belt Idler AssemblyRef. No. Part No. Part Description

1 019708 Idler Arm Weldment

2 P829 Bushing, Bronze, 1/2” ID x 1/2”

3 F05010-8 Nut, Nylock, 1/2-13

4 F05008-61 Bolt, 1/2-13 x 3 1/2”

5 P408 Idler Pulley

6 F05011-2 Washer, Flat, 1/2” SAE

7 F05010-127 Nut, Half Nylock, 1/2-13

8 P410 Spring, Extension, 1” x 7”

4

4

8

5

6

6

6

7

7

1

2

2

3

EFD004

7


Cutting Decks

Cutting Decks EFD98masterdoc101900 2-1

2

SECTION 2: CUTTING DECKS


Cutting DecksDeck Pivot & Trap Door Assemblies2

2-2 EFD98masterdoc101900 Cutting Decks

FIG. 2-1

2.1 Deck Pivot & Trap Door AssembliesRef. No. Part No. Part Description

1 018900 Pivot Pin Weldment

2 P786 Bushing, Steel, 3/4” ID x 1” OD x 5/8”

3 F05007-27 Bolt, 3/8-16 x 3/4”


5 F05008-23 Bolt, 1/2-13 x 3”

6 F05010-8 Nut, Nylock, 1/2-13

7 019272 Trap Door, Universal

8 019984 Rubber Flap, Deck EF1 (Shown)

019987 Rubber Flap, Deck EF3

9 029643 Rubber Flap Clamping Strip

10 F05005-101 Bolt, 1/4-20 x 1”




Cutting DecksDeck EFD1 & EFD3 Spindle Housing Assemblies

Cutting Decks EFD98doc073101 2-3

2

FIG. 2-2

2.2 Deck EFD1 & EFD3 Spindle Housing AssembliesRef. No. Part No. Part Description

1 018458 Housing Wldmnt, Spindle

2 P103 Bearing, Spindle, Top, 6305 RS

3 P104 Bearing, Spindle, Bottom, 6206 TGS

4 P105 O-Ring, 2 1/2” x 2 3/4”

5 T156 Pulley, Double Groove



8 F05010-139 Nut, Hex, 7/8-14

9 P108 Grease Zerk, 1/8” NPT, Straight

10 F05008-37 Bolt, 1/2-13 x 1 1/4”


12 018480 Spindle Weldment, EFD1/EFD3

13 P407 Key, 3/16” SQ x 5/8”

14 P701 Blade, 25”, High-Lift

15 F05008-95 Bolt, 5/8-18 x 1 1/4”


4

12

4

9

5

1011

6

7

8

1

13

15

16

14

2

3

ES002


Cutting DecksDeck EFD2 Spindle Housing Assembly2

2-4 EFD98doc073101 Cutting Decks

FIG. 2-3

2.3 Deck EFD2 Spindle Housing AssemblyRef. No. Part No. Part Description

1 018458 Housing Wldmnt, Spindle

2 P103 Bearing, Spindle, Top, 6305 RS

3 P104 Bearing, Spindle, Bottom, 6206 TGS

4 P105 O-Ring, 2 1/2” x 2 3/4”

5 T160 Pulley, Quad



8 F05010-139 Nut, Hex, 7/8-14

9 P108 Grease Zerk, 1/8” NPT, Straight

10 F05008-37 Bolt, 1/2-13 x 1 1/4”


12 018480 Spindle Weldment, EFD2

13 P407 Key, 3/16” SQ x 5/8”

14 P701 Blade, 25”, High-Lift

15 F05008-95 Bolt, 5/8-18 x 1 1/4”


4

12

4

9

5

10

11

67

8

1

13

15

16

14

2

3

ES003


Cutting DecksDeck Belts & Covers


2

FIG. 2-4

2.4 Deck Belts & CoversRef. No. Part No. Part Description

1 019312 Belt Cover, Deck EFD1

2 F05010-10 Nut, Nylock, 3/8-16

3 F05011-44 Washer, Fender, 3/8”

4 F05010-24 Nut, Wing, 3/8-16


6 019676 Belt Cover, Deck EFD3 Transition

7 019675 Belt Cover, Deck EFD1 Transition


9 F05009-75 Screw, Wing, 1/4-20 x 1/2”

10 P707 Belt, Insta-Power, 85870

11 P706 Belt, Insta-Power, 85890


Cutting DecksDeck EFD1 Idler Pulley Assembly2


FIG. 2-5

2.5 Deck EFD1 Idler Pulley AssemblyRef. No. Part No. Part Description

1 029844 Idler Arm Weldment, Low


3 F05010-122 Nut, Half Nylock, 3/4-10

4 P609 Idler Pulley, V-Groove

5 P608 Idler Pulley, Flat

6 F05008-10 Bolt, 1/2-13 x 2 1/4”


8 F05010-8 Nut, Nylock, 1/2-13

9 P123 Grease Zerk, 1/4-28, 90°

10 019303 Spring, Extension, 1” x 7”

4

9

5

10

6

6

7

7

8

81

2

2

3

ES004

7


Cutting DecksDeck EFD3 Idler Pulley Assembly


2

FIG. 2-6

2.6 Deck EFD3 Idler Pulley AssemblyRef. No. Part No. Part Description

1 029846 Idler Arm Weldment, High


3 F05010-122 Nut, Half Nylock, 3/4-10

4 P609 Idler Pulley, V-Groove

5 P608 Idler Pulley, Flat

6 F05008-10 Bolt, 1/2-13 x 2 1/4”


8 F05010-8 Nut, Nylock, 1/2-13

9 P123 Grease Zerk, 1/4-28, 90°

10 019303 Spring, Extension, 1” x 7”

4

9

5

10

6

6

7

8

8

1

2

2

3

ES005

7

7

7


Cutting DecksGrass Chute & Mulching Plate Assemblies2


2.7 Grass Chute & Mulching Plate Assemblies

REF DESCRIPTION PART# QTY.

1 Chute Cover, 325e Grass M230 1

2 Mount Wldmnt, Grass Chute E W633 1

3 Plate, Grass Chute Mount Bottom 019241 1

4 Bolt, 1/4-20x1 Hh Gr5 F05005-101 3

5 Washer, 1/4 Sae Flat F05011-60 6

6 Nut, 1/4-20 Nyl Lock F05010-69 3

7 Bushing,bronz 3/8 Id X 1/2 Od X1 P436 2

8 Spring, 180 Deg Torsion Left Hand P460 1

9 Pin, 1/8x1 Cotter F05012-1 2

10 Plate Wldmnt, Mulching Es W691 1

11 Pin, 1/8x1 13/16 Safety P05059 2

12 Decal, Danger, "Rotating Blades" P478 1

13 Decal, Danger, "Thrown Objects" P477 1

FIG. 2-7

12

13

6

8

7 44

10

1

2

35

11

9


Cutting DecksDeck Locking Chain Assembly


2

FIG. 2-8

2.8 Deck Locking Chain AssemblyRef. No. Part No. Part Description

1 019859 Chain, 2/0 x 22”

2 019860 Chain Sleeve, 15”

3 P449 Snap Link

4 F05006-1 Bolt, 5/16-18 x 1”


6 F05010-121 Nut, Half Nylock, 5/16-18

45

6

1

2

3

ES013


Cutting DecksDecks & Decals


2

FIG. 2-9

2.9 Decks & DecalsRef. No. Part No. Part Description

1 019622 Deck Weldment, EFD1



4 P478 Decal, Warning, “Rotating Blades”

5 P477 Decal, Warning, “Thrown Objects”

6 P836 Decal, Warning “Guards”

7 P837 Decal, Warning, “Operator Seat”

8 018008 Decal, Die-Cut, “LasTec”

9 018009 Decal, Die-Cut, “Articulator”

10 019546 Decal, Warning, “Thrown Objects” (w/Arrows)

11 018787 Decal, Warning, “Gearbox Oil” (EP 220)

12 019549 Decal, Warning, “Rotating Shaft”

13 019547 Decal, Equipment, Height Adj

14 019548 Decal, Equipment, Height Adj Instructions


Wheels

Wheels EFD98masterdoc101900 3-1

3

SECTION 3: WHEELS


WheelsDeck EFD1 Rocker Leg Assembly3

3-2 EFD98masterdoc101900 Wheels

3.1 Deck EFD1 Rocker Leg AssemblyRef. No. Part No. Part Description

1 019993 1

1 Machines before Serial Number 4031298 did not include the footstep with the Deck EFD1 rocker weldment.

Rocker Weldment, Deck EFD1 (Serial Numbers 3080798 - Present)

019626 Rocker Weldment, Deck EFD1 (Serial Numbers 1640298 - 3070698)

2 019701 Deck EFD1/EFD3 Lock Rod Weldment

3 019650-1 Spacer, 1/2”, Knurled

4 019650 Spacer, 1/2”, Smooth

5 019960 2

2 Originally 019833 Plastic Star Knob, has been replaced with the 019960 Steel Knob. The 019833 is no longer available.

Knob, Steel, 1/2-20

6 F05010-16 Nut, Half Nylock, 1/2-20

7 019348 Rod End, Female, 1/2-20

8 F05008-102 Bolt, 1/2-13 x 2”

9 F05010-122 Nut, Half Nylock, 3/4-10

10 019687 Pivot Weldment, Deck EFD1

11 018477 Pin Weldment


13 F05005-123 Bolt, 1/4-20 x 3/4”

14 P109 Bushing, Bronze, 1” ID

15 019646 Deck Locking Block


17 F05007-123 Bolt, 3/8-16 x 1 1/4”

18 019760 Rocker Limit Weldment, Deck EFD1

19 NOT USED 3

3 Machines as of Serial Number 3260898 no longer utilize bushings in this location.

Bushing, Bronze, 1/2” ID

20 019659 Rocker Link Arm

21 F05012-71 Clevis Pin, 5/16” x 2 1/8”

22 F05012-63 Hitch Pin, #216

23 P295 Wheel Assembly, 9” x 3.5”, 3/4” TRB, Pneumatic

24 P296 Bearing Spacer, 3/4” ID x 1/2”

25 T125 Bearing Spacer, 3/4” ID x 3/8”

26 F05010-122 Nut, Half Nylock, 3/4-10

27 P107 Grease Zerk, 1/4-28, Straight

28 F05010-8 Nut, Nylock, 1/2-13

29 F05011-104 Washer, Fender, 3/8”


31 F05007-118 Bolt, 3/8-16 x 3/4”


3WheelsDeck EFD1 Rocker Leg Assembly

FIG. 3-1: DECK EFD1 ROCKER LEG ASSEMBLY

Wheels 3-3325EFD98/ doc070605master

ES007C

1

2

34

5

67

8

9

11

14

15

16

17

18

1919

20

10

21

23

2425 26

27

28

29

3130

22

1213

7

6

6


WheelsDeck EFD3 Rocker Leg Assembly3


3.2 Deck EFD3 Rocker Leg AssemblyRef. No. Part No. Part Description

1 019969 Rocker Weldment, Deck EFD3 (Serial Numbers 3080798 - Present)

019627 Rocker Weldment, Deck EFD3 (Serial Numbers 1640298 - 3070698)

2 019701 Deck EFD1/EFD3 Lock Rod Weldment

3 019650-1 Spacer, 1/2”, Knurled

4 019650 Spacer, 1/2”, Smooth

5 019960 1

1 Originally 019833 Plastic Star Knob, has been replaced with the 019960 Steel Knob. The 019833 is no longer available.

Knob, Steel, 1/2-20

6 F05010-16 Nut, Half Nylock, 1/2-20

7 019348 Rod End, Female, 1/2-20

8 F05008-102 Bolt, 1/2-13 x 2”

9 F05010-122 Nut, Half Nylock, 3/4-10

10 019688 Pivot Weldment, Deck EFD3

11 018477 Pin Weldment


13 F05005-123 Bolt, 1/4-20 x 3/4”

14 P109 Bushing, Bronze, 1” ID

15 019646 Deck Locking Block


17 F05007-123 Bolt, 3/8-16 x 1 1/4”

18 019758 Rocker Limit Weldment, Deck EFD3

19 NOT USED 2

2 Machines as of Serial Number 3260898 no longer utilize bushings in this location.

Bushing, Bronze, 1/2” ID

20 019659 Rocker Link Arm

21 F05012-71 Clevis Pin, 5/16” x 2 1/8”

22 F05012-63 Hitch Pin, #216


24 P296 Bearing Spacer, 3/4” ID x 1/2”

25 T125 Bearing Spacer, 3/4” ID x 3/8”

26 F05010-122 Nut, Half Nylock, 3/4-10

27 P107 Grease Zerk, 1/4-28, Straight

28 F05010-8 Nut, Nylock, 1/2-13

29 F05011-104 Washer, Fender, 3/8”


31 F05007-118 Bolt, 3/8-16 x 3/4”


4

4

4

28

31

31

9 18 19

20

27

27

19

1414

5

10

11

13

12

11

6

6

6

21

22

23

24

2526

6

8

1

15

16

30

30

17

2

3

ES008B

7

29

7

29

1414

From Rocker Pivot Weldment to Deck

3WheelsDeck EFD3 Rocker Leg Assembly

FIG. 3-2: DECK EFD3 ROCKER LEG ASSEMBLY

Wheels 3-5325EFD98/ doc070605master


WheelsFront Axle Assembly3


FIG. 3-3

3.3 Front Axle AssemblyRef. No. Part No. Part Description

1 029626 Axle Weldment, Front (Serial Numbers 3080798 - Present)

1 019640 Axle Weldment, Front (Serial Numbers 1640298 - 3070698)

2 029627 Pull Arm Pivot Weldment

3 018473 Pull Pin Weldment

4 P109 Bushing, Bronze, 1”

5 P403 Bushing, Bronze, 3/4”

6 018900 Pivot Pin Weldment


8 F05005-123 Bolt, 1/4-20 x 3/4”

9 029628 Lever Pivot Arm

10 019702 Deck EFD2 Lock Rod Weldment

11 019348 Rod End, Female, 1/2-20

12 F05008-88 Bolt, 1/2-13 x 1 3/4”

13 F05010-8 Nut, Nylock, 1/2-13

14 F05010-16 Nut, Jam, 1/2-20

15 019651-1 Spacer, 5/16”, Knurled

16 019651 Spacer, 5/16”

17 019833 Knob, Star, 1/2-20

18 F05010-79 Nut, Half Nylock, 1/2-20

19 P123 Grease Zerk, 1/4-28, 90°

15

4

95

5

5

5

5

10

11 12

14

6

6

6

37

88

8

1

16

ES011

8

7

7

87

7

4

13

19

19

6

219

517

18


WheelsRear Axle Assembly


3

FIG. 3-4

3.4 Rear Axle AssemblyRef. No. Part No. Part Description

1 019658 Axle Weldment

2 P295 Wheel Assembly, 9” x 3.5”, Pneumatic

3 T125 Spacer, 3/4” x 3/8”

4 F05010-122 Nut, Half Nylock, 3/4-10

5 019277 Spring, Extension, 1” x 8 3/8”

6 F05007-78 Bolt, 3/8-16 x 1 1/2”

7 F05010-1 Nut, Hex, 3/8-16

8 F05010-10 Nut, Nylock, 3/8-16

9 F05010-8 Nut, Nylock, 1/2-13

10 P122 Clevis Pin, 3/4” x 4 1/2”

11 P193 Cotter Pin, 5/32” x 1 3/4”

12 019983 Rod Weldment, Rear Wheel Adj

13 019348 Rod End, Female, 1/2-20 RH

14 F05010-16 Nut, Jam, 1/2-20

15 019699 Spacer, Deck Lift Stop

16 F05008-74 Bolt, 1/2-13 x 2 1/2”

17 F05008-102 Bolt, 1/2-13 x 2”

18 019650 Spacer, 1/4”

19 P403 Bushing, Bronze, 3/4”

20 019347 Rod End, Female, 1/2-20 LH



FIG. 3-5

3.5 Left & Right Swivel Wheel Yoke AssembliesRef. No. Part No. Part Description

1 019924 Wheel Yoke Weldment, Left (Serial Numbers 3080798 - Present)

018450 Wheel Yoke Weldment, Left (Serial Numbers 1640298 - 3070698)

2 019919 Wheel Yoke Weldment, Right (Serial Numbers 3080798 - Present)

018449 Wheel Yoke Weldment, Right (Serial Numbers 1640298 - 3070698)


4 P296 Bearing Spacer, 3/4” x 1/2”

5 F05013-70 Bolt, 3/4-10 x 6 1/2”

6 F05010-103 Nut, Nylock, 3/4-10

7 T104 Spacer, 1/4”

8 P109 Bushing, Bronze, 1”

9 P843 Washer, Wave, 1”

10 F05011-75 Washer, 1 1/4” x 1/8”

11 F05011-104 Washer, Fender, 3/8” x 1/8”


13 F05004-124 Bolt, 3/8-16 x 1/2”

4

4

4

4

9

9

5

5

10

10

11

1112

13

13

12

6

61

2

3

3

ES009

7

7

7

7

8

8


Wheels 9” x 3.5” Wheel Assemblies, Pneumatic


3

Wheels are shipped unlubricated from the factory. Insure proper lubrication, bear-ing preloading, and torque specifications are met. Use Loctite on all bolts. (SeeTechnical Bulletin SB-0149)

For item 1, it is possible to have a 5/16-18 nut. Please check the hub studs beforeordering new nuts. If the studs are 18 pitch, order nuts F05010-17 and lock wash-ers F05011-13.

3.6 9” x 3.5” Wheel Assembly, Pneumatic

REF PART # DESCRIPTION QTY.

P295 Wheel/Hub Assembly, 9” x 3.5” Pneumatic

1 F05010-142 Nut, 5/16-24 Hex 4

2 Deleted 4

3 P290 Wheel Assy, Rim and Tire (Includes items 4, 5, and 6) 1

4 F05010-63 Nut, 1/4-20 Free Hex 4

5 F05011-14 Washer, 1/4 Split Lock 4

6 F05005-123 Bolt, 1/4-20x3/4 HH Gr5 4

7 041684 Wheel Hub and Bearing Assembly, (Includes items 8, 9, and 10) 1

8 P293 Bearing Seal, Trb, 1 1/8” ID 2

9 P292 Bearing, Tapered Roller, 3/4” ID 2

10 P297 Wheel Hub Assembly, Demountable (Includes items 11, 12 and 13) 1

11 P402 Bearing Race Insert, 3/4" Trb 2

12 1

1.Not sold seperately.

Wheel Hub Assembly, Demountable 1

13 P294 Fitting, 1/4-28 45º Grease 1

14 048455 Spacer, 3/4 Wheel Bearing 1

15 F05004-112 Stud, 5/16-24x3/4 Press In Zinc 4

For the 325EF series, the A150 foam-filled wheel is a direct replacement for the P295. However,it is strongly advised to change out ALL the wheel at one time, if you wish to use this tire. It is not recommended using both the P295 and the A150 on the same unit. Also, the A150 weighs nearly twice the weight of the P295, and deck lift capabilities may be affected.


3 9” x 3.5” Wheel Assemblies, Pneumatic

Rim

Ass

embl

y P2

90H

ub A

ssem

bly

0416

84

Torq

ue L

ug N

ut

to 1

60 in

-lbs

Torq

ue H

ub N

ut

to 1

35 in

-lbs


12 MONTH NO FAULT WARRANTY

CURTIS MACHINE COMPANY, INC. WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP FORA PERIOD OF ONE YEAR FROM BUILD DATE OF UNIT. IF WITHIN SUCH PERIOD ANY PRODUCT SHALL BE PROVED TO BE SO DEFECTIVE,SUCH PRODUCTS SHALL BE REPAIRED OR REPLACED AND BE LIMITED TO SUCH WARRANTY SATISFACTIONS. THE CUSTOMER WILLRETURN DEFECTIVE PRODUCTS TO SELLER FREIGHT PREPAID. THIS WARRANTY SHALL NOT APPLY TO PRODUCTS OR PARTS WHICHHAVE BEEN REPAIRED OR ALTERED (INCLUDING DISASSEMBLY) BY OTHER THAN SELLER SO AS TO ADVERSELY AFFECT THE SAME, ORWHICH HAVE BEEN SUBJECT TO NEGLIGENCE, ACCIDENT, OR DAMAGE BY CIRCUMSTANCES BEYOND SELLER'S CONTROL, IMPROPEROPERATIONS, *MAINTENANCE OR STORAGE, OR TO OTHER THAN NORMAL RECOMMENDED USE. WITH RESPECT TO PRODUCTS AND PARTSNOT MANUFACTURED BY SELLER, THE WARRANTY OBLIGATIONS OR SELLER SHALL, IN ALL RESPECTS, CONFORM AND BE LIMTED TOWARRANTY ACTUALLY EXTENDED TO SELLER BY THE SUPPLIER. THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL

OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OFMERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SELLER SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS ORLIABILITIES WHATSOEVER.

*Includes oil levels not being maintained.

P.O. Box 700 • 2500 E. Trail • Dodge City, KS 67801www.curtismachine.com

Phone 316-227-7164 • Fax 316-227-2971Toll Free USA Only 800-835-9166 [email protected]


Parts Catalog - Lastec · LasTec Articulator Model 325EFD98 Parts Catalog Manual Part Number:...

Documents

Transcript of Parts Catalog - Lastec · LasTec Articulator Model 325EFD98 Parts Catalog Manual Part Number:...