Panasonic KX-T7020 Reference Guide

8/3/2019 Panasonic KX-T7020 Reference Guide

1/16

PanasonicProprietary Telephone forElectronic Modular Switching System

MODEL NO. KX-T7020

With Speaker PhoneIllustrated Model: White

KX-T7020 is compatible with all of the Panasonic Electronic ModularSwitching Systems and can perform most functions with most PanasonicKX-T systems.Please read before use.


2/16

Important Safety InstructionsWhen using your telephoneequipment, basic safetyprecautions should always befollowed to reduce the risk of fire,electric shock and injury topersons, including the following:

1. Read and understand allinstructions.2. Follow all warnings andinstructions marked on theproduct.3. Unplug this product from thewall outlet before cleaning.Do not use liquid cleaners oraerosol cleaners. Use a dampcloth for cleaning.4. Do not use this product nearwater, for example, near abath tub, wash bowl, kitchensink, or laundry tub, in a wetbasement, or near aswimming pool.

5. Do not place this product onan unstable cart, stand, ortable. The product may fall,causing serious damage tothe product.6. Slots and openings in thecabinet and the back orbottom are provided forventilation, to protect it fromoverheating, these openingsmust not be blocked orcovered. The openingsshould never be blocked byplacing the product on thebed,, sofa, rug, or other similar

-1

surface. This product shouldnever be placed near or overa radiator or heat register.This product should not beplaced in a built-in installationunless proper ventilation isprovided.

7. Do not allow anything to reston the telephone cord. Do notlocate this product where thecord will be abused bypersons walking on it.8. Do not overload wall outletsand extension cords as thiscan result in the risk of fire orelectric shock.9. Never push objects of anykind into this product throughcabinet slots as they maytouch dangerous voltagepoints or short out parts thatcould result in a risk of fire orelectric shock. Never spillliquid of any kind on the

product.10. To reduce the risk of electric

shock, do not disassemblethis product, but take it to aqualified serviceman whensome service or repair work isrequired. Opening orremoving covers may exposeyou to dangerous voltages orother risks. Incorrectreassembly can causeelectric shock when theappliance is subsequentlyused.


3/16

11. Unplug this product from thewall outlet and refer servicingto qualified service personnelunder the following conditions:A. When the power supplycord or plug is damaged orfrayed.B. If liquid has been spilledinto the product.C. If the product has beenexposed to rain or water.D. If the product does not

operate normally byfollowing the operatinginstructions. Adjust onlythose controls, that arecovered by the operatinginstructions becauseimproper adjustment ofother controls may result indamage and will oftenrequire extensive work bya qualified technician to

12.

13.

restore the product tonormal operation.E. If the product has beendropped or the cabinet hasbeen damaged.F. If the product exhibits adistinct change inperformance.Avoid using a telephone(other than a cordless type)during an electrical storm.There may be a remote risk ofelectric shock from lightning.Do not use the telephone toreport a gas leak in thevicinity of the leak.

SAVE THESEINSTRUCTIONS

-2-


4/16

Thank you for purchasing the Panasonic Telephone.

Table of Contentsimportant safety instructions .................. 1Connection ............................Location of controls ........................ .5initial setting ............................. .7Installing the card holder .................... .8Wall mounting ............................ .9Important information ....................... IOAccessory order information .......... Back cover

-3-


5/16

ConnectionConnect as shown.

To the EMSS controlunit

Included accessories 1Handset . . . . . . one Card holder with memorystation card . . . . . . . . . . . one

Telephone line cord . . . . one Handset cord . . . . . . one

-4-


6/16

Location of controls

-0--a----a-63-@----a----a-@

KX-T7020 is compatible with the Panasonic Electronic ModularSwitching Systems and can perform most functions with mostPanasonic KX-T systems.

-5-


7/16

Panasonic MODEL NO. KX-T7020Operating InstructionsPress the P-PHONE utton or lift the handset first.(LL-IIFeature Description

Intercom Dials from station toCalling station within the system.Individual Selects any CO lineLine Access directly.Automatic Selects an unoccupiedLine Access CO line automatically.System Dials the stored phoneSpeed number by followingDialing simple operation.One-Touch Dials the stored numberDialing by pressing only onebutton.

AutomaticCall BackBusy(Camp-on)

Receives a notice that thebusy line becomes free.

Redial Redials the last numberdialed.Automatic redial can workin upgraded systems.

Operation Proceduresc

/ g -[access]Dialing: ]xllJlProgramming:1. Set the memory switch to PROGRAM.2. p~-[fgq-$g-pJ3. The memory switch must be adjusted sothat it is in the SET position.

Outside Calls:

Intercom Calls:


8/16

Feature DescriptionMswer Answers an incomingcall.AutomaticAnswer-Intercom

Answers an intercom callin the automatic hands-free mode.

Dial CallPickupAnswers any ringingextension within the sameextension group.

Hold-CO LinePuts an outside call onhold.

Holcl-IntercomPuts an intercom call onhold.

Call Transfer Transfers a call to anyto Extension extension.

Canceling: The indicator goes out.

mThe pickup code dependson the EMSS Controlnit

The CO line indicator flashes in greenOther extensions flash in red.The indicator lights in

Retrieving coq The indicator lights infrom another (I green.extension:The intercom indicator flashes in

~~ftTi!%Jm~Transferring without speaking to the

For further details, please refer to the Electronic Modular Switching System (EMSS) ControlUnit Manual.


9/16

ChecklistFor your convenience, please fill in the blank with Operations on the EMSS Control UnitAanual.

System Features Operation ProceduresOutward DialingIndividual Trunk GroupCalling DoorphoneConferencePaging All ExtensionsPaging-ExtensionGroupPaging-ExternalPaging And TransferPaging-AnswerPaging from Built-in

Speaker----------Paging fromExternal Equipment--------------------

Flexible Line ButtonChanging to a CO LineButton---------Changing to a DSSButton---------Changing to a OneTouch Dialing Button

---------e-------v-

-------------------

Call ForwardingDo Not Disturb


10/16

System Features Operation Procedures

Please use this Operating Instructions Manual for basic operations. Refer to theElectronic Modular Switching System (EMSS) Control Unit Manual foradditional features.

NoticeA series of the beep tone may sound periodically when the MEMORY switch is set tothe PROGRAM. This is a normal condition.

Panasonic CompanyDivision of Matsushita Electric Corporation of AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Company (West) of AmericaDivision of Matsushita Electric Corporation of America6550 Katella Avenue, Cypress, California 90630Panasonic Sales Company (PSC)Division of Matsushita Electric of Puerto Rico, Inc.San Gabriel lndustnal Park, 65th Infantry Avenue, KM 9.5, Carolina, P R 00630

Printed in Unlted Kingdom PQQX6464ZA F0391 R1071 R


11/16

@ INTERCOM Button andIndicator:Used for making or receivingan intercom call.@CONFERENCE Button andIndicator:Used for speaking with threeparties at the same time.@ REDIAL Button:Redials the last numberdialed.@ FLASH Button:Used for sending the hookflash signal to the CO line.@ Programmable Feature Buttons:

Dial or access the systemfeatures with one touch.@ Flexible CO Line Buttons andIndicators*:Used for dialing via CO line,Direct Station Selection, orProgrammable Featurebuttons.@ Flexible Message WaitingButton and Indicator*:Used for Message Waiting,Direct Station Selection, orProgrammable Feature button.@ FWD/DND Button and Indicator:Sets or cancels the CallForwarding/Do Not Disturb

features.

@TRANSFER Button:Transfers a call to anyextension.

@ PAUSE Button:Inserts a pause between theaccess number and thephone number.0 AUTO DIAL/STORE Buttonand Indicator:Used for dialing the systemspeed dialing/For storingfunctions into memory.@AUTO ANSWER/MUTE Buttonand Indicator:Used for answering anintercom call automatically/For muting your voice inhands-free mode.@I SP-PHONE Button andIndicator:Used for making or receivinga call without using thehandset.@) HOLD Button:Places a call on hold.*These functions are limited to thespecified EMSS Control Units.Refer to the Installation manual.

-6-


12/16

Initial setting

I~ANDSEToLuME Selector:To adjust the volume level of the handset.NORMAL: Normal voiceHIGH: Loud voiceRINGER VOLUME Selector:To adjust the volume level of the ringer.HIGH: Loud ringerLOW: Low ringerOFF: No ringer

VOLUME Control:To adjust the volume level of the speaker volume.MAX: Loud voiceMIN: Low voice

MEMORY Switch:Set to SET.For station programming, set to PROGRAM.

-7-


13/16

Installing the card holder1

2

Line up the marks (b) onthe card holder and ones onthe slide rails of the unit.

Push the two shadedportions slightly and insertthe edges of the holderunder the slide rails andthen slide down towardarrow A.

Removing the card holder:-Push the card holder towardarrow B while keeping the tipof the holder pulled toward arrowC.

-8-


14/16

Wall mountingThis unit can be mounted on the wall phone plate.

1 Turn the handset hookupside down. 4 Place the stand on thecenter of the unit.

2 Remove the attached stand.

3 Rotate the stand l/2 turn sothat the arrow on the standshows UP for WALL.

5 Mount the unit on the wallphone plate.

\/\/

I

To temporarily place the handsetdown during a conversation, hookas shown.

-9-


15/16

If there is any trouble, disconnect theunit from the extension line andconnect a known working phone. Ifthe known working phone operatesproperly, have the defective phonerepaired by one of the specifiedPanasonic Factory Service Centers. Ifthe known working phone does notoperate properly, check theElectronic Modular Switching Systemand the Internal extension wiring.WARNING:TO PREVENT FIRE OR SHOCKHAZARD, DO NOT EXPOSE THISPRODUCT TO RAIN OR ANY TYPEOF MOISTURE.CAUTION:To assure continued compliance withFCC rules, do not make anyunauthorized modifications. Whenprogramming emergency numbersand/or making test calls toemergency numbers:1) Remain on the line and brieflyexplain to the dispatcher thereason for the call before hanging

up.2) Perform such activities in the off-peak hours, such as early morninghours or late evenings.INSTALLATION:1) Never install telephone wiringduring a lightning storm.2) Never install telephone jacks inwet locations unless the jack isspecifically designed for wetlocations.3) Never touch uninsulated telephone

wires or terminals unless thetelephone line has beendisconnected at the networkInterface.4) Use caution when installing ormodifying telephone lines.

NOTE:This equipment has been tested andfound to comply with the limits for aClass B digital device, pursuant toPart 15 of the FCC Rules. Theselimits are designed to providereasonable protection against harmfulinterference in a residentialinstallation. This equipment generates,uses, and can radiate radiofrequency energy and, if not installedand used in accordance with theinstructions, may cause harmfulinterference to radio communications.However, there is no guarantee thatinterference will not occur in aparticular installation. If thisequipment does cause harmfulinterference to radio or televisionreception, which can be determinedby turning the equipment off and on,the user is encouraged to try tocorrect the interference by one ormore of the following measures:-Reorient or relocate the receivingantenna.-Increase the separation betweenequipment and receiver.-Connect the equipment into anoutlet on a circuit different from thatto which the receiver is connected.-Consult the dealer or anexperienced radio/TV technician forhelp.This telephone provides magneticcoupling to hearing aids.

-lO-


16/16

Important information (cont.)@Keep the unit away from heating appliances and electrical noisegenerating devices such as fluorescent lamps and motors.@The unit should be kept free of dust, moisture and vibration, and shouldnot be exposed to direct sunlight.@Do not use benzine, thinner, or the like, or any abrasive powder toclean the cabinet. Wipe it with a soft cloth.@Do not use any handset other than Panasonic handset.

Accessory order information

Part NO. ( Picture DescriptionKX-J07W, BKX-J 15W, BKX-J25W,B Handset cord

oReplacement parts and accessories are available through your localauthorized parts distributor.@For ordering the accessory, call toll free: l-800-332-5368

For your future referenceSERIAL NO.(found on the bottom of the unit)

DATE OF PURCHASE

NAME OF DEALERDEALERS ADDRESS

Panasonic CompanyDivision of Matsushita Electric Corporation of AmericaOne Panasonic Way, Secaucus, New Jersey 07094Panasonic Company (West) of AmericaDivision of Matsushita Electric Corporation of America6550 Katella Avenue, Cypress, California. 90630Panasonic Sales Company (PSC)Division of Matsushita Electric of Puerto Rico, Inc.San Gabriel Industrial Park, 65th Infantry Avenue, KM 9.5, Carolina, P.R. 00630

Panasonic KX-T7020 Reference Guide

Documents

Transcript of Panasonic KX-T7020 Reference Guide