PALLET RACKING - Link51 Trade · PALLET RACKING COMPONENT PRICE LIST Pallet Racking Prices Issue 1...

Click here to load reader

  • date post

    16-Apr-2020
  • Category

    Documents

  • view

    31
  • download

    3

Embed Size (px)

Transcript of PALLET RACKING - Link51 Trade · PALLET RACKING COMPONENT PRICE LIST Pallet Racking Prices Issue 1...

  • PRICE LIST 7th January 2019PALLET RACKING

  • PAGE 2 Pallet Racking PricesJanuary 2019 Issue 1

    PALLET RACKING SYSTEM COMPONENTS

    Frames must be floor fixed. Refer to Technical Department for further information

    Run Spacer (adjustable)

    Run Spacer (fixed)

    ShelfCladdingSupport

    ForkSpacer

    Pallet Support Channel

    Frame

    Beam

    Bolted Joining Unit

    Steel Shelf Panel

    Pallet Foot Support

    Drum Chock

    Chipboard Shelf Panel

    Shelf Cladding Support,Stepped Beam(Minimum 2 off)

    Stepped Beam

    Wire Beam Tie

    Coil Cradle

    Cladding Location Bracket

    U-Type UprightProtector

    U-Type Upright Protector.With infill

    Angle Type UprightProtector

    FrameFootplates

    Steel Shelf Panel

    Frame

    Beam Locking Pin (2 requiredfor each beam)

    B1

    B2

    R2

    B3

    B4

    Exploded Illustration of Components

    Pallet Support Bar

  • PALLET RACKING COMPONENT PRICE LIST

    Pallet Racking Prices PAGE 3January 2019Issue 1

    General Conditions● Orders must clearly state any specially agreed terms, prices and discounts with any appropriate reference numbers.

    ● Order cancellation is subject to agreement and if accepted, could attract a charge of up to 100% of the order value.

    ● Orders under £100 nett value incur a £10 handling/delivery surcharge.

    ● On occassion we may need to discuss additional delivery charges for locations outside our standard delivery routes.

    ● Order acknowledgments will always show the LATEST planned deliver by date, unless specific delivery dates have been agreed.

    ● All list prices exclude VAT, which will be charged at the ruling rate at point of invoice.

    ● Credit Card payment facilities are available.

    Delivery Conditions● List prices are inclusive of standard delivery within the UK mainland only, Monday to Friday 8am to 5pm. All other deliveries on request.

    ● Orders may be despatched on multiple vehicles which may arrive on different days.

    RECEIPT OF DELIVERIES

    ● Standard delivery is assumed to allow clear access by a vehicle - of up to 40ft trailer size - to a ground floor location.

    ● IMPORTANT NOTE: It is the responsibility of the Distributor/Specifier to ensure that adequate labour and/or manned handling equipment is available to off-load at the delivery point.

    ● Additional charges may apply where these conditions are not met, unless otherwise agreed at time of order placement.

    ● Waiting time will be charged for any delay, should unloading not commence within 30 minutes of the vehicle arriving at the site.

    ● The charge will be at the rate of £55 per half hour up to a maximum of 1 hour, after which it will be at our discretion to pull off site.

    ● Failed and Repeat Delivery conditions would then apply.

    FAILED AND REPEAT DELIVERIES

    ● Failed and Repeat Deliveries will be charged at cost dependant on location and required delivery date and time.

    ● If waiting time occurs prior to a failed delivery this will be charged at £55 per half-hour.

    ● Storage costs will be charged for any product that cannot be delivered by the agreed scheduled date.

    RETURNS

    ● Returns will only be accepted at our discretion in its original packaging and in delivered condition.

    ALL OF THE ABOVE MUST BE READ IN CONJUNCTION WITH OUR STANDARD TERMS AND CONDITIONS OF SALE.

    The information contained in this price list was accepted as correct at the date of publication. However, we reserve the right to make any necessary changes, in line with product development and trading conditions.

    Although all reasonable care has been taken to make it as complete and accurate as possible, no liability can be accepted for any inaccuracies or omissions. E+OE.

    Price list issued by: Whittan

    © 2019 Whittan

    Page Components

    4 Quick Delivery Pallet Racking

    5 Beam Range & Coding

    6 Box Beams

    7 Shelving & Open Beams

    8-9 KD Frames - Medium Duty Uprights

    10-11 KD Frames - Heavy Duty Uprights

    12-13 KD Frames - Extra Heavy Duty Uprights

    14 Steel Shelf Panels, Pallet Support Channels, Pallet Support Bars, Shelf Cladding Supports

    15 Rack Run Spacers, Coil Cradles,Fork Spacers, Pallet Foot Supports, Wire Beam Ties, Drum Chocks

    16 Beam Locking Clips, Joining Units, Cladding Brackets, Fixings, Shims, Alpha Racks, Load Signs

    17 K.D. Frame Components

    18 Upright Protectors & Barrier Rails

    Contents

    Product Availability● RED priced items are available on 3 Day quick delivery. As a guide the value for Pallet Racking products is £30,000 list price and is subject to availability and product mix, unless specifically agreed by us.

    ● All other items available on ‘Manufacture lead time’ Please refer to the Link51 Trade office for current availability.

    CODE COLOUR/FINISH

    GX Graphite Grey (BS5252 18 A14) - frame uprights, accessories*

    GT Pre-galvanised material - frame bracing ties, shelf panels

    OR YellowOrange (RAL2000) - beams, accessories*

    GU Light Grey (RAL7035) - accessories*

    ZC Zinc Plated accessories

    *As indicated in part number

  • 3 DAY QUICK DELIVERY

    PAGE 4 Pallet Racking PricesJanuary 2019 Issue 1

    LENGTH 070XC 085XC 095YC 105YC 120ZC 130ZD*

    Q070XC1350....A3OR 1350mm £50.63

    Q085XC2250....A3OR 2250mm £75.51

    Q095YC2700....A3OR 2700mm £104.03

    Q105YC2700....A3OR 2700mm £109.26

    Q120ZC2700....A3OR 2700mm £112.68

    Q130ZD3300....A3OR 3300mm £143.09*

    Notes:Prices are per Beam, excluding Locking Pins - two required per beam.

    DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    HEIGHT FEET 0900 1100

    QKN2850M----AB1GXQ B1 £175.72 £181.64

    QKN4050M----AB1GXQ B1 £241.34 £249.12

    QKN5250M----AB2GXQ B2 £313.80 £323.44

    QKN6450M----AB2GXQ B2 £379.70 £391.20

    DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    HEIGHT FEET 0900 1100

    QKN2850H----AB2GXQ B2 £215.28 £221.20

    QKN4050H----AB2GXQ B2 £294.74 £302.52

    QKN5250H----AB2GXQ B2 £374.12 £383.76

    QKN6450H----AB2GXQ B2 £453.36 £464.86

    Terms of Quick Delivery• Orders must be received by 1pm for 3 day delivery.• List price value of £30k of mixed Pallet Racking product.• FREE, UK mainland delivery on orders over £100

    MEDIUM DUTY FRAMES

    HEAVY DUTY FRAMES

    BOX BEAMS

    CODE PRICE £ EACH

    XLLP85ZC £0.97

    BEAM LOCKING PINS

    CODE PRICE £ EACH

    RSF0200GT £6.47

    FIXED RUN SPACER - 200mm

    TYPE PRICE £ EACH

    B3HZC £13.57

    B3 FOOT PLATE

    B1/B2 PRICE £ EACH B3/B4 PRICE £ EACH

    SH1B1B2 - 1mm shim

    £1.59 SH1B3B4- 1mm shim

    £1.17

    SHKB1B2- Kit

    £5.88 SHKB3B4- Kit

    £7.86

    Please note quantity restrictions apply.

    TYPE DESCRIPTION PRICE £ EACH

    Floor - Standard Duty - up to 9mm

    Ramsett Dynabolt - FD12058C

    £1.86

    Floor - Heavy Duty FAS1515 £6.47

    SHIMS & SHIM KITS

    FOOT PLATES Inc. Frame Bolts

    FLOOR FIXINGS

    TYPE CODE PRICE £ EACH

    U shape UP400OR £81.80

    L shape UPRA400OR £83.51

    UPRIGHT PROTECTORSRequires 4 heavy duty floor fixing bolts per protector.

    U shape L shape

    Notes:B1/B2 feet require 1 and B3 feet require 2 floor fixings.

    *B130 beams can only be used with Heavy Duty Frames.

    Frames supplied KD with either B1 or B2 foot plate as shown in table

    Frames supplied KD with B2 foot plates Notes:B3 feet must be used for installations less than 3 bays long.

    40mm Deep

    40mm Deep

    45mm Deep

    45mm Deep

    50mm Deep

    50mm Deep

    TYPE DESCRIPTION PRICE £ EACH

    NY38ZC 3/8 nyloc nut 0.17

    SP8838HH60ZG 8.8 3/8 x 60 set pin (gold finish) 0.63

    SPZC Frame Spacer 0.48

    COMPONENTS

    TYPE DESCRIPTION PRICE £ EACH

    B1HGT B1 Foot plate 5.40

    B2HZC B2 Foot plate 8.82

    B3HZC B3 Foot plate 13.57

    FOOT PLATES Inc. Frame Bolts

    FRAME DEPTH DIAGONAL HORIZONTAL

    900mm BDT0900SGT 6.75 BHT0900SGT 5.65

    1100mm BDT1100SGT 7.68 BHT1100SGT 6.75

    KD FRAME TIES

    KD FRAME COMPONENTS

    FRAME HEIGHT MEDIUM DUTY HEAVY DUTY

    2850mm QM2850GX 60.02 QH2850GX 76.39

    4050mm QM4050GX 85.28 QH4050GX 108.57

    5250mm QM5250GX 110.55 QH5250GX 140.71

    6450mm QM6450GX 135.95 QH6450GX 172.78

    KD FRAME UPRIGHTS

  • BOX, OPEN & SHELVING BEAMS - PRODUCT UPDATE

    Pallet Racking Prices PAGE 5January 2019Issue 1

    B 095 Y C 2700 - - - - A3 OR

    TypeB = Box

    BeamWidthmmX = 40Y = 45Z = 50

    Beam LengthNominal, mm(Ranges from1050 - 4500)

    ConnectorA3, 3-tongueA4, 4-tongue

    BeamHeightmm

    Beam GaugemmC 1.5 D 1.6F 1.8 K 2.2

    DownweldsCharacters tobe added fornon-standarddownwelds,in mme.g. D015(015 =15mm)

    ColourFinish

    BU 050 S 2700 - - - - A3 OR

    Type Beam LengthNominal, mm(Ranges from1050 - 3900)

    ConnectorA3, 3-tongue

    Beam Height mm

    DownweldsCharacters tobe added fornon-standarddownwelds,

    in mme.g. D015

    (015 =15mm)

    ColourFinish

    Part Number System - Box Beams

    Part Number System - Open Beams

    2BB. 2700 - - - - A3T OR

    Type2BB.2BST4BST

    Beam LengthNominal, mm(Ranges from1050 - 3900)

    ConnectorA3T, 3-tongue

    For 3 digitcodes,replace 4thdigit with .

    DownweldsCharacters tobe added fornon-standarddownwelds,in mme.g. D015(015 =15mm)

    ColourFinish

    Part Number System - Shelving Beams

    DutyS = Standard 1.5mm

    H = Heavy 2mm

    50mm

    Section C Primary Components - Pallet Racking Design Manual

    Shelving & Open Beams

    Open Beams

    Shelving Only Beams (Not suitable for supporting pallets)

    Note: Illustrations are not to scale.

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    A3T, 3-tongue

    OR2BST 2700 A3T

    For 3 digitcodes,

    replace 4thdigit with .

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    3-tongue

    OR2700 A3

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    2BB Shelving Only

    25mm

    55m

    m

    2BST Shelving Only

    45mm

    20mm

    65m

    m

    20m

    m

    4BST Shelving Only

    45mm

    20mm

    80m

    m

    27m

    m

    C2

    15mmm

    m

    BeamHeight

    mm

    50mm

    Section C Primary Components - Pallet Racking Design Manual

    Shelving & Open Beams

    Open Beams

    Shelving Only Beams (Not suitable for supporting pallets)

    Note: Illustrations are not to scale.

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    A3T, 3-tongue

    OR2BST 2700 A3T

    For 3 digitcodes,

    replace 4thdigit with .

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    3-tongue

    OR2700 A3

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    2BB Shelving Only

    25mm

    55m

    m

    2BST Shelving Only

    45mm

    20mm

    65m

    m

    20m

    m

    4BST Shelving Only

    45mm

    20mm

    80m

    m

    27m

    m

    C2

    15mm

    mm

    BeamHeight

    mm

    50mm

    Section C Primary Components - Pallet Racking Design Manual

    Shelving & Open Beams

    Open Beams

    Shelving Only Beams (Not suitable for supporting pallets)

    Note: Illustrations are not to scale.

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    A3T, 3-tongue

    OR2BST 2700 A3T

    For 3 digitcodes,

    replace 4thdigit with .

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    3-tongue

    OR2700 A3

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    2BB Shelving Only

    25mm

    55m

    m

    2BST Shelving Only

    45mm

    20mm

    65m

    m

    20m

    m

    4BST Shelving Only

    45mm

    20mm

    80m

    m

    27m

    m

    C2

    15mm

    mm

    BeamHeight

    mm

    50mm

    Section C Primary Components - Pallet Racking Design Manual

    Shelving & Open Beams

    Open Beams

    Shelving Only Beams (Not suitable for supporting pallets)

    Note: Illustrations are not to scale.

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    A3T, 3-tongue

    OR2BST 2700 A3T

    For 3 digitcodes,

    replace 4thdigit with .

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    Part Number System

    Type Beam LengthNominal, mm

    (Ranges from 900 - 4500)

    Connector

    3-tongue

    OR2700 A3

    Downwelds

    Characters to be addedfor non-standard

    downwelds,in mm

    eg. D015 (015 =15mm)

    ColourFinish

    . . . .

    2BB Shelving Only

    25mm

    55m

    m

    2BST Shelving Only

    45mm

    20mm

    65m

    m

    20m

    m

    4BST Shelving Only

    45mm

    20mm

    80m

    m

    27m

    m

    C2

    15mm

    mm

    BeamHeight

    mm

    For 2OBC use BU050SFor 3OB use BU075H

    Beam Height mm Width mm Thickness mm

    BU038S 38 50 1.5

    BU050S 50 50 1.5

    BU060S 60 50 1.5

    BU070S 70 50 1.5

    BU075H 75 50 2.0

    BU085S 85 50 1.5

    BU100S 100 50 1.5

    BU110H 110 50 2.0

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1

    Standard Beam Part Numbers

    Notes:

    Box Beams

    Part Number System

    TypeB=Box

    BeamHeight

    mm

    BeamLength

    Nominal,mm

    (Rangesfrom 900 -

    4500)

    BeamDepthmm

    X = 40

    Y = 45

    Z = 50

    Connector

    A3, 3-tongue

    A4, 4-tongue

    ORB 095 Y C 2700 . . . . A3

    DownweldsCharactersto be added

    for non-standard

    downwelds,in mm

    eg. D015(015 =15mm)

    ColourFinish

    GS (hot

    dippedgalv.)

    ContactDesignOffice

    BeamThickness

    mmC = 1.5 D = 1.6F = 1.8K = 2.2

    Note: Illustrations are not to scale.

    Section C Primary Components - Pallet Racking Design Manual

    Box Beams

    C1OPEN BEAMS SHELVING BEAMS

    BOX BEAMS

    Green shaded beams

    available April 2019

  • BOX BEAMS - PRICE £ Each

    LENGTHB070XC

    70 x 40mmB085XC

    85 x 40mmB085ZC

    85 x 50mmB090ZC

    90 x 50mmB095YC

    95 x 45mmB100ZC

    100 x 50mmB105YC

    105 x 45mmB110ZC

    110 x 50mmB120ZC

    120 x 50mmB130ZD

    130 x 50mmB150ZD

    150 x 50mmB155ZF

    155 x 50mmB155ZK

    155 x 50mm

    1050 42.79 43.15 49.33 50.44 49.72 52.11 51.94 52.67 53.43 56.55 64.72 77.66 91.11

    1125 44.75 45.18 51.79 52.97 52.19 54.73 54.55 55.32 56.12 59.43 67.95 81.54 95.80

    1200 46.71 47.20 54.26 55.51 54.66 57.36 57.15 57.97 58.82 62.32 71.18 85.41 100.49

    1275 48.67 49.22 56.73 58.04 57.13 59.99 59.76 60.62 61.51 65.20 74.40 89.28 105.18

    1350 50.63 51.24 59.19 60.58 59.60 62.61 62.36 63.27 64.20 68.08 77.63 93.16 109.87

    1425 52.59 53.26 61.66 63.11 62.07 65.24 64.97 65.91 66.90 70.97 80.86 97.03 114.57

    1500 54.55 55.29 64.13 65.65 64.54 67.87 67.57 68.56 69.59 73.85 84.09 100.90 119.26

    1575 56.51 57.31 66.59 68.18 67.00 70.49 70.18 71.21 72.28 76.74 87.31 104.78 123.95

    1650 58.46 59.33 69.06 70.72 69.47 73.12 72.78 73.86 74.97 79.62 90.54 108.65 128.64

    1725 60.42 61.35 71.53 73.25 71.94 75.74 75.39 76.51 77.67 82.51 93.77 112.52 133.34

    1800 62.38 63.38 73.99 75.79 74.41 78.37 77.99 79.16 80.36 85.39 97.00 116.40 138.03

    1875 64.34 65.40 76.46 78.32 76.88 81.00 80.60 81.80 83.05 88.28 100.23 120.27 142.72

    1950 66.30 67.42 78.93 80.86 79.35 83.62 83.20 84.45 85.75 91.16 103.45 124.14 147.41

    2025 68.26 69.44 81.39 83.39 81.82 86.25 85.81 87.10 88.44 94.05 106.68 128.02 152.11

    2100 70.22 71.47 83.86 85.93 84.28 88.87 88.41 89.75 91.13 96.93 109.91 131.89 156.80

    2175 72.18 73.49 86.33 88.46 86.75 91.50 91.02 92.40 93.83 99.82 113.14 135.77 161.49

    2250 74.14 75.51 88.80 91.00 89.22 94.13 93.63 95.05 96.52 102.70 116.37 139.64 166.18

    2325 76.09 77.53 91.26 93.53 91.69 96.75 96.23 97.69 99.21 105.59 119.59 143.51 170.88

    2400 78.05 79.55 93.73 96.07 94.16 99.38 98.84 100.34 101.90 108.47 122.82 147.39 175.57

    2475 80.01 81.58 96.20 98.60 96.63 102.00 101.44 102.99 104.60 111.35 126.05 151.26 180.26

    2550 81.97 83.60 98.66 101.14 99.09 104.63 104.05 105.64 107.29 114.24 129.28 155.13 184.95

    2625 83.93 85.62 101.13 103.67 101.56 107.26 106.65 108.29 109.98 117.12 132.51 159.01 189.65

    2700 85.89 87.64 103.60 106.21 104.03 109.88 109.26 110.93 112.68 120.01 135.73 162.88 194.34

    2775 87.85 89.67 106.06 108.74 106.50 112.51 111.86 113.58 115.37 122.89 138.96 166.75 199.03

    2850 89.81 91.69 108.53 111.28 108.97 115.14 114.47 116.23 118.06 125.78 142.19 170.63 203.72

    2925 91.76 93.71 111.00 113.81 111.44 117.76 117.07 118.88 120.76 128.66 145.42 174.50 208.42

    3000 93.72 95.73 113.46 116.35 113.91 120.39 119.68 121.53 123.45 131.55 148.65 178.37 213.11

    3075 95.68 97.76 115.93 118.88 116.37 123.01 122.28 124.18 126.14 134.43 151.87 182.25 217.80

    3150 97.64 99.78 118.40 121.42 118.84 125.64 124.89 126.82 128.83 137.32 155.10 186.12 222.49

    3225 99.60 101.80 120.86 123.95 121.31 128.27 127.49 129.47 131.53 140.20 158.33 189.99 227.19

    3300 101.56 103.82 123.33 126.49 123.78 130.89 130.10 132.12 134.22 143.09 161.56 193.87 231.88

    3375 103.52 105.85 125.80 129.02 126.25 133.52 132.70 134.77 136.91 145.97 164.78 197.74 236.57

    3450 105.48 107.87 128.26 131.56 128.72 136.14 135.31 137.42 139.61 148.86 168.01 201.61 241.26

    3525 107.44 109.89 130.73 134.09 131.18 138.77 137.91 140.06 142.30 151.74 171.24 205.49 245.95

    3600 109.39 111.91 133.20 136.63 133.65 141.40 140.52 142.71 144.99 154.62 174.47 209.36 250.65

    3675 111.35 113.93 135.66 139.17 136.12 144.02 143.12 145.36 147.69 157.51 177.70 213.23 255.34

    3750 113.31 115.96 138.13 141.70 138.59 146.65 145.73 148.01 150.38 160.39 180.92 217.11 260.03

    3825 115.27 117.98 140.60 144.24 141.06 149.27 148.33 150.66 153.07 163.28 184.15 220.98 264.72

    3900 117.23 120.00 143.06 146.77 143.53 151.90 150.94 153.31 155.76 166.16 187.38 224.86 269.42

    3975 119.19 122.02 145.53 149.31 146.00 154.53 153.54 155.95 158.46 169.05 190.61 228.73 274.11

    4050 121.15 124.05 148.00 151.84 148.46 157.15 156.15 158.60 161.15 171.93 193.84 232.60 278.80

    4125 - - - - 189.69 197.61 196.30 199.40 201.16 212.72 233.13 249.09 316.95

    4200 - - - - 192.85 200.92 199.57 202.73 204.48 216.28 236.93 253.09 322.34

    4275 - - - - 196.04 204.23 202.85 206.07 207.84 219.84 240.76 257.15 327.73

    4350 - - - - 199.21 207.54 206.15 209.41 211.22 223.41 244.60 261.17 333.12

    4425 - - - - 202.39 210.85 209.44 212.75 214.57 226.96 248.38 265.22 338.51

    4500 - - - - 205.56 214.17 212.73 216.09 217.93 230.52 252.21 269.25 343.91

    BOX BEAMS - 1050 to 4500 mm

    Notes:1. Prices are per Beam, excluding Locking Pins (Part No. XLLP85ZC) - two required per beam.2. B155 & B150 Beams are for use with Extra-heavy & Super-heavy duty frames only (loads specified are for these beams fitted with 4-tongue connectors).

    3. B130 Beams are for use with Heavy,Extra-heavy and Super-heavy duty frames.4. B070-B120 Beams (inclusive) are for use with all frame types.5. For Galvanised Beams and beams with 4T connectors (other than B155 & B150), prices on application.

    6. 2BST & 4BST Stepped Beams must be fitted with one or two Wire Beam Ties, equally spaced. 1800 to 2625mm - 1 beam tie 2700 to 4050mm - 2 beam ties.

    PAGE 6 Pallet Racking PricesJanuary 2019 Issue 1

  • SHELVING & OPEN BEAMS - 1050 to 4050 mm

    Pallet Racking Prices PAGE 7January 2019Issue 1

    OPEN BEAMS - PRICE £ EACH SHELVING BEAMS - PRICE £ EACH

    LENGTHBU038S

    38 x 50mmBU050S

    50 x 50mmBU060S

    60 x 50mmBU070S

    70 x 50mmBU075H

    75 x 50mmBU085S

    85 x 50mmBU100S

    110 x 50mmBU110H

    110 x 50mm2BB

    55 x 25mm2BST

    65 x 45mm4BST

    80 x 45mm

    1050 29.51 32.45 35.05 37.39 38.00 40.82 44.33 50.29 30.15 30.40 37.79

    1125 30.75 33.87 36.63 39.11 39.75 42.76 46.49 52.85 31.42 31.73 39.45

    1200 31.99 35.29 38.20 40.83 41.50 44.70 48.65 55.40 32.69 33.06 41.10

    1275 33.23 36.71 39.77 42.54 43.25 46.64 50.80 57.96 33.96 34.39 42.75

    1350 34.47 38.13 41.34 44.26 45.00 48.58 52.96 60.52 35.24 35.72 44.40

    1425 35.71 39.56 42.91 45.98 46.75 50.52 55.12 63.08 36.51 37.05 46.06

    1500 36.95 40.98 44.48 47.70 48.49 52.45 57.28 65.63 37.78 38.37 47.71

    1575 38.20 42.40 46.05 49.42 50.24 54.39 59.44 68.19 39.05 39.70 49.36

    1650 39.44 43.82 47.62 51.13 51.99 56.33 61.60 70.75 40.32 41.03 51.01

    1725 40.68 45.24 49.19 52.85 53.74 58.27 63.75 73.31 41.60 42.36 52.67

    1800 41.92 46.66 50.76 54.57 55.49 60.21 65.91 75.86 42.87 43.69 54.32

    1875 43.16 48.08 52.34 56.29 57.24 62.14 68.07 78.42 44.14 45.02 55.97

    1950 44.40 49.50 53.91 58.00 58.99 64.08 70.23 80.98 45.41 46.35 57.63

    2025 45.64 50.92 55.48 59.72 60.74 66.02 72.39 83.53 46.68 47.68 59.28

    2100 46.88 52.34 57.05 61.44 62.49 67.96 74.55 86.09 47.96 49.01 60.93

    2175 48.12 53.77 58.62 63.16 64.24 69.90 76.70 88.65 49.23 50.34 62.58

    2250 49.36 55.19 60.19 64.88 65.99 71.83 78.86 91.21 50.50 51.67 64.24

    2325 50.60 56.61 61.76 66.59 67.74 73.77 81.02 93.76 51.77 53.00 65.89

    2400 51.84 58.03 63.33 68.31 69.49 75.71 83.18 96.32 53.04 54.33 67.54

    2475 53.08 59.45 64.90 70.03 71.24 77.65 85.34 98.88 54.32 55.66 69.19

    2550 - - 66.47 71.75 72.99 79.59 87.50 101.44 55.59 56.99 70.85

    2625 - - 68.04 73.46 74.74 81.52 89.65 103.99 - 58.31 72.50

    2700 - - 69.62 75.18 76.49 83.46 91.81 106.55 - 59.64 74.15

    2775 - - 71.19 76.90 78.24 85.40 93.97 109.11 - 60.97 75.81

    2850 - - 72.76 78.62 79.98 87.34 96.13 111.67 - 62.30 77.46

    2925 - - 74.33 80.34 81.73 89.28 98.29 114.22 - 63.63 79.11

    3000 - - 75.90 82.05 83.48 91.21 100.45 116.78 - 64.96 80.76

    3075 - - 77.47 83.77 85.23 93.15 102.60 119.34 - 66.29 82.42

    3150 - - 79.04 85.49 86.98 95.09 104.76 121.90 - 67.62 84.07

    3225 - - 80.61 87.21 88.73 97.03 106.92 124.45 - 68.95 85.72

    3300 - - 82.18 88.93 90.48 98.97 109.08 127.01 - 70.28 87.37

    3375 - - - 90.64 92.23 100.90 111.24 129.57 - 71.61 89.03

    3450 - - - 92.36 93.98 102.84 113.40 132.13 - 72.94 90.68

    3525 - - - - 95.73 104.78 115.55 134.68 - 74.27 92.33

    3600 - - - - 97.48 106.72 117.71 137.24 - 75.60 93.99

    3675 - - - - - 108.66 119.87 139.80 - 76.93 95.64

    3750 - - - - - 110.60 122.03 142.36 - 78.26 97.29

    3825 - - - - - 112.53 124.19 144.91 - 79.58 98.94

    3900 - - - - - 114.47 126.35 147.47 - 80.91 100.60

    3975 - - - - - - - - - - -

    4050 - - - - - - - - - - -

    4125 - - - - - - - - - - -

    4200 - - - - - - - - - - -

    4275 - - - - - - - - - - -

    4350 - - - - - - - - - - -

    4425 - - - - - - - - - - -

    4500 - - - - - - - - - - -

    7. When used to support Chipboard or similar shelving, all non-stepped Beams may require the use of Cladding Location Brackets.

    8. Downwelded beams are available at no extra cost (consider additional installation and marshalling costs).9. Beams available on 5mm increments.

    2OBCReplacement

    3OBReplacement

  • DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    M0 HEIGHT500 FEET M0500 M0600 M0700 M0750 M0800 M0900

    KN1050 B1 74.14 72.56 74.16 75.01 75.72 77.25

    KN1200 B1 87.92 85.36 87.58 88.73 89.71 91.78

    KN1350 B1 94.28 91.72 93.94 95.09 96.07 98.14

    KN1500 B1 100.60 98.04 100.26 101.41 102.39 104.46

    KN1650 B1 105.42 104.22 106.18 107.28 108.16 110.14

    KN1800 B1 119.16 116.98 119.56 120.96 122.11 124.63

    KN1950 B1 125.46 123.28 125.86 127.26 128.41 130.93

    KN2100 B1 131.72 129.54 132.12 133.52 134.67 137.19

    KN2250 B1 136.52 135.70 138.02 139.37 140.42 142.85

    KN2400 B1 150.40 148.60 151.54 153.19 154.51 157.48

    KN2550 B1 156.66 154.86 157.80 159.45 160.77 163.74

    KN2700 B1 162.90 161.10 164.04 165.69 167.01 169.98

    KN2850 B1 167.78 167.34 170.02 171.62 172.84 175.72

    KN3000 B1 181.50 180.08 183.38 185.28 186.77 190.19

    KN3150 B1 187.90 186.48 189.78 191.68 193.17 196.59

    KN3300 B1 194.20 192.78 196.08 197.98 199.47 202.89

    KN3450 B1 199.06 199.00 202.04 203.89 205.28 208.61

    KN3600 B1 212.76 211.72 215.38 217.53 219.19 223.06

    KN3750 B1 219.04 218.00 221.66 223.81 225.47 229.34

    KN3900 B1 225.46 224.42 228.08 230.23 231.89 235.76

    KN4050 B1 230.18 230.50 233.90 236.00 237.56 241.34

    KN4200 B1 244.00 243.34 247.36 249.76 251.59 255.91

    KN4350 B2 257.12 256.46 260.48 262.88 264.71 269.03

    KN4500 B2 263.40 262.74 266.76 269.16 270.99 275.31

    KN4650 B2 268.20 268.90 272.66 275.01 276.74 280.97

    KN4800 B2 281.94 281.66 286.04 288.69 290.69 295.46

    KN4950 B2 288.36 288.08 292.46 295.11 297.11 301.88

    KN5100 B2 294.64 294.36 298.74 301.39 303.39 308.16

    KN5250 B2 299.42 300.50 304.62 307.22 309.12 313.80

    KN5400 B2 313.20 313.30 318.04 320.94 323.11 328.33

    KN5550 B2 319.48 319.58 324.32 327.22 329.39 334.61

    KN5700 B2 325.86 325.96 330.70 333.60 335.77 340.99

    KN5850 B2 330.68 332.14 336.62 339.47 341.54 346.67

    KN6000 B2 344.44 344.92 350.02 353.17 355.51 361.18

    KN6150 B2 350.70 351.18 356.28 359.43 361.77 367.44

    KN6300 B2 357.04 357.52 362.62 365.77 368.11 373.78

    KN6450 B2 362.10 363.94 368.78 371.88 374.12 379.70

    KD FRAMES - MEDIUM DUTY UPRIGHT - 500 to 900 mm depths

    MEDIUM UPRIGHT SECTION

    PAGE 8 Pallet Racking PricesJanuary 2019 Issue 1

    KN 2100 M 0900 A B2 GXQ

    EXAMPLE PART NUMBER

    Frame Type Frame Height Upright Type Frame Depth A = Ambient Feet Type Finish

    1.72 mmFrame gauge

  • DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    M0 HEIGHT500 FEET M1000 M1100 M1200 M1300 M1400 M1500

    KN1050 B1 78.84 80.38 82.06 83.68 85.30 91.15

    KN1200 B1 93.92 96.01 98.28 100.46 102.65 109.04

    KN1350 B1 100.28 102.37 104.64 106.82 109.01 115.40

    KN1500 B1 106.60 108.69 110.96 113.14 115.33 121.72

    KN1650 B1 112.22 114.20 116.38 118.50 120.60 137.51

    KN1800 B1 127.26 129.79 132.56 135.24 137.91 155.36

    KN1950 B1 133.56 136.09 138.86 141.54 144.21 161.66

    KN2100 B1 139.82 142.35 145.12 147.80 150.47 167.92

    KN2250 B1 145.42 147.84 150.52 153.14 155.72 183.69

    KN2400 B1 160.60 163.57 166.84 170.02 173.17 201.68

    KN2550 B1 166.86 169.83 173.10 176.28 179.43 207.94

    KN2700 B1 173.10 176.07 179.34 182.52 185.67 214.18

    KN2850 B1 178.78 181.64 184.82 187.94 191.00 230.03

    KN3000 B1 193.80 197.21 200.98 204.66 208.29 237.89

    KN3150 B1 200.20 203.61 207.38 211.06 214.69 254.26

    KN3300 B1 206.50 209.91 213.68 217.36 220.99 260.56

    KN3450 B1 212.16 215.46 219.14 222.76 226.30 276.39

    KN3600 B1 227.16 231.01 235.28 239.46 243.57 294.20

    KN3750 B1 233.44 237.29 241.56 245.74 249.85 300.48

    KN3900 B1 239.86 243.71 247.98 252.16 256.27 306.90

    KN4050 B1 245.38 249.12 253.30 257.42 261.44 322.59

    KN4200 B1 260.50 264.79 269.56 274.24 278.83 340.52

    KN4350 B2 273.62 277.91 282.68 287.36 291.95 353.64

    KN4500 B2 279.90 284.19 288.96 293.64 298.23 359.92

    KN4650 B2 285.50 289.68 294.36 298.98 303.48 375.69

    KN4800 B2 300.54 305.27 310.54 315.72 320.79 393.54

    KN4950 B2 306.96 311.69 316.96 322.14 327.21 399.96

    KN5100 B2 313.24 317.97 323.24 328.42 333.49 406.24

    KN5250 B2 318.82 323.44 328.62 333.74 338.72 431.00

    KN5400 B2 333.90 339.07 344.84 350.52 356.07 439.88

    KN5550 B2 340.18 345.35 351.12 356.80 362.35 446.16

    KN5700 B2 346.56 351.73 357.50 363.18 368.73 452.54

    KN5850 B2 352.18 357.24 362.92 368.54 374.00 468.33

    KN6000 B2 367.24 372.85 379.12 385.30 391.33 486.20

    KN6150 B2 373.50 379.11 385.38 391.56 397.59 492.46

    KN6300 B2 379.84 385.45 391.72 397.90 403.93 498.80

    KN6450 B2 385.70 391.20 397.38 403.50 409.44 514.83

    KD FRAMES - MEDIUM DUTY UPRIGHT - 1000 to 1500 mm depths

    MEDIUM UPRIGHT SECTION

    NOTE: UP TO AND INCLUDING 4200mm:● For No Feet Subtract £10.82● For B2 Feet Add £6.82● For B3 Add £16.34● For B4 Feet Add £41.26

    NOTE: ● For No Feet Subtract £17.64● For B3 Add £9.52● For B4 Feet Add £34.44

    Pallet Racking Prices PAGE 9January 2019Issue 1

    1.72 mmFrame gauge

  • DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    M0 HEIGHT500 FEET H0500 H0600 H0700 H0750 H0800 H0900

    KN1050 B2 93.10 91.52 93.12 93.97 94.68 96.21

    KN1200 B2 108.56 106.00 108.22 109.37 110.35 112.42

    KN1350 B2 116.58 114.02 116.24 117.39 118.37 120.44

    KN1500 B2 124.60 122.04 124.26 125.41 126.39 128.46

    KN1650 B2 131.08 129.88 131.84 132.94 133.82 135.80

    KN1800 B2 146.64 144.46 147.04 148.44 149.59 152.11

    KN1950 B2 154.62 152.44 155.02 156.42 157.57 160.09

    KN2100 B2 162.72 160.54 163.12 164.52 165.67 168.19

    KN2250 B2 169.26 168.44 170.76 172.11 173.16 175.59

    KN2400 B2 184.70 182.90 185.84 187.49 188.81 191.78

    KN2550 B2 192.72 190.92 193.86 195.51 196.83 199.80

    KN2700 B2 200.78 198.98 201.92 203.57 204.89 207.86

    KN2850 B2 207.34 206.90 209.58 211.18 212.40 215.28

    KN3000 B2 222.82 221.40 224.70 226.60 228.09 231.51

    KN3150 B2 230.84 229.42 232.72 234.62 236.11 239.53

    KN3300 B2 238.94 237.52 240.82 242.72 244.21 247.63

    KN3450 B2 245.42 245.36 248.40 250.25 251.64 254.97

    KN3600 B2 260.96 259.92 263.58 265.73 267.39 271.26

    KN3750 B2 269.02 267.98 271.64 273.79 275.45 279.32

    KN3900 B2 277.00 275.96 279.62 281.77 283.43 287.30

    KN4050 B2 283.58 283.90 287.30 289.40 290.96 294.74

    KN4200 B2 299.02 298.36 302.38 304.78 306.61 310.93

    KN4350 B2 307.06 306.40 310.42 312.82 314.65 318.97

    KN4500 B2 315.12 314.46 318.48 320.88 322.71 327.03

    KN4650 B2 321.66 322.36 326.12 328.47 330.20 334.43

    KN4800 B2 337.14 336.86 341.24 343.89 345.89 350.66

    KN4950 B2 345.16 344.88 349.26 351.91 353.91 358.68

    KN5100 B2 353.18 352.90 357.28 359.93 361.93 366.70

    KN5250 B2 359.74 360.82 364.94 367.54 369.44 374.12

    KN5400 B2 375.24 375.34 380.08 382.98 385.15 390.37

    KN5550 B2 383.30 383.40 388.14 391.04 393.21 398.43

    KN5700 B2 391.32 391.42 396.16 399.06 401.23 406.45

    KN5850 B2 397.80 399.26 403.74 406.59 408.66 413.79

    KN6000 B2 413.30 413.78 418.88 422.03 424.37 430.04

    KN6150 B2 421.40 421.88 426.98 430.13 432.47 438.14

    KN6300 B2 429.44 429.92 435.02 438.17 440.51 446.18

    KN6450 B2 435.76 437.60 442.44 445.54 447.78 453.36

    KD FRAMES - HEAVY DUTY UPRIGHT - 500 to 900 mm depths

    KN 2100 H 0900 A B2 GXQ

    EXAMPLE PART NUMBER

    Frame Type Frame Height Upright Type Frame Depth A = Ambient Feet Type Finish

    NOTE: ● For No Feet Subtract £17.64● For B3 Add £9.52● For B4 Feet Add £34.44

    HEAVY DUTY UPRIGHT SECTION

    PAGE 10 Pallet Racking PricesJanuary 2019 Issue 1

    2.0 mmFrame gauge

  • DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    M0 HEIGHT500 FEET H1000 H1100 H1200 H1300 H1400 H1500

    KN1050 B2 97.80 99.34 101.02 102.64 104.26 110.11

    KN1200 B2 114.56 116.65 118.92 121.10 123.29 129.68

    KN1350 B2 122.58 124.67 126.94 129.12 131.31 137.70

    KN1500 B2 130.60 132.69 134.96 137.14 139.33 145.72

    KN1650 B2 137.88 139.86 142.04 144.16 146.26 163.17

    KN1800 B2 154.74 157.27 160.04 162.72 165.39 182.84

    KN1950 B2 162.72 165.25 168.02 170.70 173.37 190.82

    KN2100 B2 170.82 173.35 176.12 178.80 181.47 198.92

    KN2250 B2 178.16 180.58 183.26 185.88 188.46 216.43

    KN2400 B2 194.90 197.87 201.14 204.32 207.47 235.98

    KN2550 B2 202.92 205.89 209.16 212.34 215.49 244.00

    KN2700 B2 210.98 213.95 217.22 220.40 223.55 252.06

    KN2850 B2 218.34 221.20 224.38 227.50 230.56 269.59

    KN3000 B2 235.12 238.53 242.30 245.98 249.61 279.21

    KN3150 B2 243.14 246.55 250.32 254.00 257.63 297.20

    KN3300 B2 251.24 254.65 258.42 262.10 265.73 305.30

    KN3450 B2 258.52 261.82 265.50 269.12 272.66 322.75

    KN3600 B2 275.36 279.21 283.48 287.66 291.77 342.40

    KN3750 B2 283.42 287.27 291.54 295.72 299.83 350.46

    KN3900 B2 291.40 295.25 299.52 303.70 307.81 358.44

    KN4050 B2 298.78 302.52 306.70 310.82 314.84 375.99

    KN4200 B2 315.52 319.81 324.58 329.26 333.85 395.54

    KN4350 B2 323.56 327.85 332.62 337.30 341.89 403.58

    KN4500 B2 331.62 335.91 340.68 345.36 349.95 411.64

    KN4650 B2 338.96 343.14 347.82 352.44 356.94 429.15

    KN4800 B2 355.74 360.47 365.74 370.92 375.99 448.74

    KN4950 B2 363.76 368.49 373.76 378.94 384.01 456.76

    KN5100 B2 371.78 376.51 381.78 386.96 392.03 464.78

    KN5250 B2 379.14 383.76 388.94 394.06 399.04 491.32

    KN5400 B2 395.94 401.11 406.88 412.56 418.11 501.92

    KN5550 B2 404.00 409.17 414.94 420.62 426.17 509.98

    KN5700 B2 412.02 417.19 422.96 428.64 434.19 518.00

    KN5850 B2 419.30 424.36 430.04 435.66 441.12 535.45

    KN6000 B2 436.10 441.71 447.98 454.16 460.19 555.06

    KN6150 B2 444.20 449.81 456.08 462.26 468.29 563.16

    KN6300 B2 452.24 457.85 464.12 470.30 476.33 571.20

    KN6450 B2 459.36 464.86 471.04 477.16 483.10 588.49

    KD FRAMES - HEAVY DUTY UPRIGHT - 1000 to 1500 mm depths

    NOTE: ● For No Feet Subtract £17.64● For B3 Add £9.52● For B4 Feet Add £34.44

    HEAVY DUTY UPRIGHT SECTION

    Pallet Racking Prices PAGE 11January 2019Issue 1

    KN 2100 H 0900 A B2 GXQ

    EXAMPLE PART NUMBER

    Frame Type Frame Height Upright Type Frame Depth A = Ambient Feet Type Finish

    2.0 mmFrame gauge

  • DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    M0 HEIGHT500 FEET E0500 E0600 E0700 E0750 E0800 E0900

    KN1050 B2 115.95 114.63 116.31 117.23 118.06 119.94

    KN1200 B2 134.93 132.75 135.05 136.31 137.44 140.01

    KN1350 B2 146.01 143.83 146.13 147.39 148.52 151.09

    KN1500 B2 156.97 154.79 157.09 158.35 159.48 162.05

    KN1650 B2 166.72 165.80 167.92 169.08 170.14 172.52

    KN1800 B2 185.82 184.04 186.78 188.28 189.64 192.71

    KN1950 B2 196.88 195.10 197.84 199.34 200.70 203.77

    KN2100 B2 207.92 206.14 208.88 210.38 211.74 214.81

    KN2250 B2 217.81 217.29 219.85 221.25 222.54 225.42

    KN2400 B2 236.73 235.35 238.53 240.27 241.86 245.43

    KN2550 B2 247.79 246.41 249.59 251.33 252.92 256.49

    KN2700 B2 258.83 257.45 260.63 262.37 263.96 267.53

    KN2850 B2 268.70 268.58 271.58 273.22 274.74 278.12

    KN3000 B2 287.66 286.68 290.30 292.28 294.10 298.17

    KN3150 B2 298.80 297.82 301.44 303.42 305.24 309.31

    KN3300 B2 309.78 308.80 312.42 314.40 316.22 320.29

    KN3450 B2 319.59 319.87 323.31 325.19 326.94 330.82

    KN3600 B2 338.59 338.01 342.07 344.29 346.34 350.91

    KN3750 B2 349.67 349.09 353.15 355.37 357.42 361.99

    KN3900 B2 360.75 360.17 364.23 366.45 368.50 373.07

    KN4050 B2 370.58 371.26 375.14 377.26 379.24 383.62

    KN4200 B2 389.64 389.46 393.96 396.42 398.70 403.77

    KN4350 B2 400.60 400.42 404.92 407.38 409.66 414.73

    KN4500 B2 411.62 411.44 415.94 418.40 420.68 425.75

    KN4650 B2 421.49 422.57 426.89 429.25 431.46 436.34

    KN4800 B2 440.47 440.69 445.63 448.33 450.84 456.41

    KN4950 B2 451.53 451.75 456.69 459.39 461.90 467.47

    KN5100 B2 462.65 462.87 467.81 470.51 473.02 478.59

    KN5250 B2 472.46 473.94 478.70 481.30 483.74 489.12

    KN5400 B2 491.40 492.02 497.40 500.34 503.08 509.15

    KN5550 B2 502.52 503.14 508.52 511.46 514.20 520.27

    KN5700 B2 513.56 514.18 519.56 522.50 525.24 531.31

    KN5850 B2 523.37 525.25 530.45 533.29 535.96 541.84

    KN6000 B2 542.37 543.39 549.21 552.39 555.36 561.93

    KN6150 B2 553.43 554.45 560.27 563.45 566.42 572.99

    KN6300 B2 564.45 565.47 571.29 574.47 577.44 584.01

    KN6450 B2 574.22 576.50 582.14 585.22 588.12 594.50

    KD FRAMES - EXTRA HEAVY DUTY UPRIGHT - 500 to 900 mm depths

    NOTE: ● For No Feet Subtract £17.64● For B3 Add £9.52● For B4 Feet Add £34.44

    EXTRAHEAVY DUTY UPRIGHT SECTION

    PAGE 12 Pallet Racking PricesJanuary 2019 Issue 1

    KN 2100 E 0900 A B2 GXQ

    EXAMPLE PART NUMBER

    Frame Type Frame Height Upright Type Frame Depth A = Ambient Feet Type Finish

    2.64mmFrame gauge

  • DEPTH FRAME DEPTH MM / PRICE £ PER FRAME

    M0 HEIGHT500 FEET E1000 E1100 E1200 E1300 E1400 E1500

    KN1050 B2 121.70 123.49 125.43 127.30 129.21 135.38

    KN1200 B2 142.36 144.78 147.40 149.91 152.49 159.28

    KN1350 B2 153.44 155.86 158.48 160.99 163.57 170.36

    KN1500 B2 164.40 166.82 169.44 171.95 174.53 181.32

    KN1650 B2 174.86 177.18 179.70 182.16 184.64 203.32

    KN1800 B2 195.64 198.59 201.79 204.89 208.04 227.34

    KN1950 B2 206.70 209.65 212.85 215.95 219.10 238.40

    KN2100 B2 217.74 220.69 223.89 226.99 230.14 249.44

    KN2250 B2 228.34 231.19 234.29 237.34 240.39 271.58

    KN2400 B2 248.94 252.42 256.20 259.89 263.61 295.42

    KN2550 B2 260.00 263.48 267.26 270.95 274.67 306.48

    KN2700 B2 271.04 274.52 278.30 281.99 285.71 317.52

    KN2850 B2 281.62 285.00 288.68 292.32 295.94 339.64

    KN3000 B2 302.26 306.27 310.63 314.91 319.20 352.26

    KN3150 B2 313.40 317.41 321.77 326.05 330.34 374.66

    KN3300 B2 324.38 328.39 332.75 337.03 341.32 385.64

    KN3450 B2 334.90 338.81 343.07 347.30 351.49 407.70

    KN3600 B2 355.58 360.12 365.06 369.93 374.79 431.62

    KN3750 B2 366.66 371.20 376.14 381.01 385.87 442.70

    KN3900 B2 377.74 382.28 387.22 392.09 396.95 453.78

    KN4050 B2 388.28 392.72 397.56 402.38 407.14 475.86

    KN4200 B2 409.02 414.09 419.61 425.07 430.50 499.84

    KN4350 B2 419.98 425.05 430.57 436.03 441.46 510.80

    KN4500 B2 431.00 436.07 441.59 447.05 452.48 521.82

    KN4650 B2 441.58 446.55 451.97 457.38 462.71 543.94

    KN4800 B2 462.24 467.84 473.94 479.99 485.99 567.84

    KN4950 B2 473.30 478.90 485.00 491.05 497.05 578.90

    KN5100 B2 484.42 490.02 496.12 502.17 508.17 590.02

    KN5250 B2 494.94 500.44 506.44 512.44 518.34 622.38

    KN5400 B2 515.56 521.69 528.37 535.01 541.58 635.94

    KN5550 B2 526.68 532.81 539.49 546.13 552.70 647.06

    KN5700 B2 537.72 543.85 550.53 557.17 563.74 658.10

    KN5850 B2 548.24 554.27 560.85 567.44 573.91 680.16

    KN6000 B2 568.92 575.58 582.84 590.07 597.21 704.08

    KN6150 B2 579.98 586.64 593.90 601.13 608.27 715.14

    KN6300 B2 591.00 597.66 604.92 612.15 619.29 726.16

    KN6450 B2 601.48 608.04 615.20 622.38 629.42 748.18

    KD FRAMES - EXTRA HEAVY DUTY UPRIGHT - 1000 to 1500 mm depths

    NOTE: ● For No Feet Subtract £17.64● For B3 Add £9.52● For B4 Feet Add £34.44

    EXTRAHEAVY DUTY UPRIGHT SECTION

    Pallet Racking Prices PAGE 13January 2019Issue 1

    KN 2100 E 0900 A B2 GXQ

    EXAMPLE PART NUMBER

    Frame Type Frame Height Upright Type Frame Depth A = Ambient Feet Type Finish

    2.64mmFrame gauge

  • PAGE 14 Pallet Racking PricesJanuary 2019 Issue 1

    ACCESSORIES

    PRICE £ EACH

    FRAME DEPTH

    MM0300SSP 0300MSP 0300HSP 0375SSP 0375MSP 0375HSP

    0500 22.04 24.34 29.63 23.58 26.37 32.52

    0600 21.20 23.88 30.02 22.93 26.17 33.55

    0700 22.53 25.71 32.79 24.65 28.40 36.81

    0750 23.39 26.67 34.23 25.60 29.45 38.45

    0800 24.09 27.53 35.57 26.37 30.59 40.18

    0900 25.60 29.45 38.45 28.20 32.79 43.44

    1000 27.22 31.54 41.54 30.21 35.29 46.97

    1100 28.76 33.55 44.29 31.93 37.49 50.33

    1200 30.30 35.48 47.07 33.66 39.81 53.59

    1300 31.74 37.30 49.85 35.48 42.00 57.06

    1400 33.18 39.13 52.73 37.21 44.29 60.32

    1500 43.26 49.59 64.06 47.46 52.35 72.11

    STEEL SHELF PANELS

    0300 SSP 0900 50 GT

    EXAMPLE PART NUMBER

    SSP = StandardMSP = MediumHSP = Heavy

    To suit Beamsections:45/50mm

    Panel Width:0300 0375

    FrameDepth

    Finish

    PRICE £ EACH

    FRAME DEPTH MM 2SB 2BB S070XC B070XC 2OBC

    0500 18.17 19.90 20.31 26.64 23.37

    0600 18.88 21.58 22.40 29.13 25.37

    0700 19.95 23.36 22.99 31.52 27.97

    0750 20.31 24.16 23.64 32.75 28.91

    0800 20.98 25.92 24.28 33.70 29.89

    0900 21.62 27.65 25.70 36.39 31.61

    1000 22.62 29.20 27.01 38.77 33.57

    1100 23.78 31.61 28.24 41.20 35.83

    1200 24.44 33.16 29.59 43.55 37.21

    1300 26.47 34.92 30.88 45.98 39.19

    1400 27.31 36.59 32.29 48.29 40.49

    1500 28.31 38.33 33.54 50.91 43.13

    SHELF CLADDING SUPPORTS - OB & BB Section

    NOTE: - Check loads, there is a lower cost solution.

    SCS 0900 2BB 50 OR

    EXAMPLE PART NUMBER

    FrameDepth

    To suit Beamsections:25/40/45/50mm

    Product Support Material

    ColourFinish

    NOT TO BE USED TOSUPPORT PALLETS

    Support Material

    PRICE £ EACH

    STANDARD DUTY (BTH) HEAVY DUTY (2SB)

    FRAME DEPTH MM 2BST 4BST 2BST 4BST

    0500 11.48 12.49 13.90 14.65

    0600 11.87 12.89 14.82 15.64

    0700 12.77 13.03 15.80 16.21

    0750 13.21 14.22 16.31 17.09

    0800 13.91 14.87 16.76 17.50

    0900 14.57 15.56 17.69 18.57

    1000 15.35 15.71 18.87 19.63

    1100 16.21 17.29 19.62 20.40

    1200 17.16 18.22 20.58 21.39

    1300 ** ** 21.25 22.33

    1400 ** ** 22.13 23.28

    1500 ** ** 23.12 24.26

    SHELF CLADDING SUPPORTS - 2BST & 4BST

    SCS 0900 ST BTH 20 OR

    EXAMPLE PART NUMBER

    FrameDepth

    To suit Beam sections:20 = 2BST27 = 4BST

    Product Stepped Beam

    ColourFinish

    BTH = STD2SB = HD

    PSC 6563 F **** 45 GT

    EXAMPLE PART NUMBER

    65mm Wx 63mm D

    Nominal Framedepth

    Pallet Support Channel

    Material GuageF = 1.8mmH = 2mm

    To suit Beam sections:45/50mm

    PALLET SUPPORT BARS

    For prices please refer toTechnical Department

    PSB 0900 2OBC 45 OR

    EXAMPLE PART NUMBER

    Frame Depth To suit Beamsections:40/45/50mm

    Pallet Support Bar

    Support Material

    ColourFinish

    PALLET SUPPORT CHANNEL

    FRAME DEPTH MM PRICE £ EACH

    PSC6563F090045GT 26.49

    PSC6563F090050GT 26.49

    PSC6563F110045GT 30.20

    PSC6563F110050GT 30.20

    Colour Finish

    ** Heavy Duty Supports must be used for these lengths

  • Pallet Racking Prices PAGE 15January 2019Issue 1

    FORK SPACERS

    TYPE / PRICE £ EACH

    FRAME DEPTH MM S = B095YC M = B105YC H = B120ZC

    0500 21.64 26.23 27.56

    0600 23.98 29.51 31.04

    0700 26.45 32.80 34.58

    0750 27.56 34.40 36.33

    0800 28.76 36.01 38.09

    0900 31.04 39.31 41.54

    1000 33.42 42.46 45.07

    1100 37.02 46.92 49.74

    1200 39.36 50.21 53.28

    1300 41.71 53.42 56.78

    1400 44.03 56.70 60.28

    1500 46.42 59.97 63.81

    FS 0500 S OR

    EXAMPLE PART NUMBER

    S - StandardM - MediumH = Heavy

    COIL CRADLES PRICE £ EACHFRAME DEPTH MM S = B095YC

    0500 81.25

    0600 91.69

    0700 102.18

    0750 107.47

    0800 112.66

    0900 123.21

    1000 133.68

    1100 144.12

    1200 154.61

    1300 165.16

    1400 175.66

    1500 186.07

    CC 0800 GU

    EXAMPLE PART NUMBER

    ACCESSORIES

    DRUM CHOCKS

    FRAME DEPTH MM PRICE £ EACH

    DC40GU 17.76

    DC45GU 18.01

    DC50GU 18.26

    PALLET FOOT SUPPORTS

    PFS 0600 S GU

    EXAMPLE PART NUMBER

    S - StandardM - MediumH = Heavy

    For prices please refer toTechnical Department

    RACK RUN SPACER - Fixed

    RACK SPACING MM

    PRICE £ EACH

    0050 4.84

    0100 5.52

    0150 5.88

    0200 6.47

    0250 6.85

    0300 7.51

    0350 7.68

    0400 8.04

    0450 8.47

    0500 9.16

    0550 10.35

    0600 10.77

    0650 11.16

    0700 11.55

    0750 12.01

    *0800 P.O.A.

    *0850 P.O.A.

    *0900 P.O.A.

    *0950 P.O.A.

    *1000 P.O.A.

    RSF 0150 GT

    EXAMPLE PART NUMBER

    NOTES:Use 2 Spacers on opposite sides of the upright and fixed at the same vertical position for these lengths. GT 50mm up to 750mm *GX 800mm and above

    RACK RUN SPACER - Adjustable

    RACK SPACING MM

    PRICE £ EACH

    0100 17.85

    0150 18.38

    0200 19.31

    0250 20.07

    0300 21.01

    0350 22.01

    0400 22.55

    0450 23.81

    0500 24.59

    0550 25.29

    0600 26.03

    0650 27.64

    0700 28.47

    0750 29.19

    *0800 P.O.A.

    *0850 P.O.A.

    *0900 P.O.A.

    *0950 P.O.A.

    *1000 P.O.A.

    RSA 0200 GT

    EXAMPLE PART NUMBER

    NOTES:Use 2 Spacers on opposite sides of the upright and fixed at the same vertical position for these lengths.GT 50mm up to 750mm *GX 800mm and above

    WIRE BEAM TIES (for Stepped Beams)

    PRICE £ EACH

    FRAME DEPTH MM BSWTGP

    0500 1.87

    0600 1.98

    0700 2.10

    0750 2.21

    0800 2.36

    0900 2.52

    1000 2.73

    1100 2.99

    1200 3.02

    1300 3.37

    1400 3.49

    1500 3.59

    BSWT 0700 GP

    EXAMPLE PART NUMBER

  • CLADDING BRACKETS

    TYPE PRICE £ EACH

    CL25GTCL40GTCL45GTCL50GT

    1.311.310.700.70

    25mm40mm45mm50mm

    BEAM LOCKING PINS

    TYPE PRICE £ EACH

    XLLP85ZC 0.97

    JOINING UNIT (Incl. N&B’s)

    TYPE PRICE £ EACH

    BJUGX 16.66

    FRAME FIXINGSTYPE DESCRIPTION PRICE £ EACH

    NY38ZC 3/8 nyloc nut 0.17

    SP8838HH60ZG 8.8 3/8 x 60 set pin (gold finish) 0.63

    SHIMS & SHIM KITS

    B1/B2 PRICE £ EACH B3/B4 PRICE £ EACH

    SH1B1B2SH2B1B2SH4B1B2

    1.591.902.39

    SH05SB3B4SH1B3B4SH2B3B4SH4B3B4

    1.931.172.214.48

    B1/B2 PRICE £ EACH B3/B4 PRICE £ EACH

    SHKB1B2 5.88 SHKB3B4 7.86

    SPRINKLER ARM

    TYPE PRICE £ EACH

    SBA150HZC 14.40

    Sprinkler arm support bracket.Requires 1 beam locking clip. Order seperately.

    PRICE £ EACH

    FRAME DEPTH mm 0500 0600 0700 0800 0900 1000 1100 1200 0500 1300 1400 1500

    (S) STANDARD 4.90 3.92 4.54 4.84 5.11 5.65 6.20 6.75 7.34 7.90 8.47 9.01

    PART NUMBER DESCRIPTION PRICE £ EACH

    SSFK FIXING KIT* - Contains fixings for theSEMA sign and horizontal bracing.

    11.36

    SSCN 1st CAUTION SIGN POA

    SEMA SIGNS AND FIXING KITS

    * NOTE Fixing kit does not include bracings. Add 2 Horizontal bracings per kit.

    BHT 0900 S GT

    EXAMPLE PART NUMBER* - Horizontal

    MISCELLANEOUS COMPONENTS, FIXINGS and ALPHA RACKS

    ALPHA RACKS

    TYPE HEIGHT DEPTH PRICE £ EACH

    ‘A’ FRAME

    AFXL0935GT 2507mm 935mm 196.74

    WALL FRAME

    WFXL0505GT 2550mm 505mm 192.03

    CANTILEVER ARMS

    BAXL0230ORBAXL0310ORBAXL0460OR

    LENGTH 230mmLENGTH 310mmLENGTH 460mm

    32.4035.4841.92

    “A” Frame Wall Frame

    FLOOR FIXINGSTYPE DESCRIPTION PRICE £ EACH

    Floor - Standard Duty -up to 9mm

    Ramsett Dynabolt - FD12058C

    1.86

    Floor - Heavy Duty FAS1515 6.47

    PAGE 16 Pallet Racking PricesJanuary 2019 Issue 1

  • Pallet Racking Prices PAGE 17January 2019Issue 1

    FRAMEHEIGHT

    MM

    UPRIGHT DUTY / PRICE £ EACH

    M H E S

    1050120013501500165018001950

    22.1125.2728.4531.6134.7837.9241.07

    28.1832.1836.1940.2044.2048.2552.24

    38.7644.2849.8255.3060.8166.3971.92

    46.6553.2859.9566.5873.2779.8886.58

    210022502400255027002850

    44.2047.3650.5753.7056.8260.02

    56.2960.3264.3168.3272.3576.39

    77.4483.0288.5194.0499.56

    105.13

    93.2499.91

    106.57113.21119.85126.53

    3000315033003450360037503900

    63.1566.3569.5072.6975.8178.9582.16

    80.4084.4188.4692.4696.50

    100.53104.52

    110.64116.21121.70127.24132.77138.31143.85

    133.18139.86146.50153.19159.80166.50173.15

    4050420043504500465048004950

    85.2888.4691.6194.7597.91

    101.05104.26

    108.57112.56116.58120.61124.64128.65132.66

    149.40154.96160.44165.95171.52177.04182.57

    179.79186.43193.13199.78206.46213.09219.78

    510052505400555057005850

    107.40110.55113.71116.85120.04123.21

    136.67140.71144.73148.76152.77156.77

    188.13193.67199.17204.73210.25215.79

    226.46233.11239.75246.40253.06259.73

    6000615063006450660067506900

    126.36129.49132.66135.95139.08 142.24145.40

    160.79164.84168.86172.78176.81180.85184.83

    221.32226.85232.36237.88243.40248.94254.45

    266.39273.03279.68286.43293.10299.75306.42

    7050720073507500765078007950

    148.57151.74154.87158.07161.24164.40167.56

    188.89192.90196.94200.96204.93208.94212.97

    259.98265.51271.05276.57282.11287.66293.19

    313.06319.74326.41333.05339.73346.36353.04

    810082508400855087008850

    170.71173.88177.03180.19183.38186.51

    217.01221.00225.05229.02233.10237.09

    298.69304.24309.77315.32320.84326.39

    359.70366.35373.03379.68386.35393.02

    9000915093009450960097509900

    189.69192.83196.04199.17202.32205.50208.67

    241.10245.14249.13253.17257.19261.24265.24

    331.90337.44342.96348.47354.03359.53365.07

    399.70406.33412.98419.63426.31433.00439.66

    10050102001035010500106501080010950

    211.81214.97218.14221.32224.47227.60230.79

    269.25273.25277.27281.31285.31289.31293.34

    370.63376.13381.70387.21392.75398.28403.80

    446.30452.95459.64466.28472.94479.60486.25

    111001125011400115501170011850

    233.96237.12240.26243.40246.61249.77

    297.38301.38305.41309.40313.45317.45

    409.34414.89420.41425.94431.46437.00

    492.94499.61506.27512.92519.54526.23

    12000121501230012450

    252.89256.10259.24262.38

    321.50325.52329.51333.55

    442.52448.06453.59459.12

    532.88539.55546.22552.86

    K.D. FRAME UPRIGHTS

    DIAGONAL DIAGONAL HORIZONTAL HORIZONTAL

    DEPTH (S)TANDARD (H)EAVY (S)TANDARD (H)EAVY

    0500 5.14 5.87 4.90 5.38

    0600 5.52 6.27 3.92 4.52

    0700 5.88 6.71 4.54 5.14

    0750 6.13 6.95 4.84 5.48

    0800 6.30 7.18 5.11 5.78

    0900 6.75 7.68 5.65 6.47

    1000 7.24 8.26 6.20 7.06

    1100 7.68 8.79 6.75 7.69

    1200 8.18 9.37 7.34 8.37

    1300 8.68 9.96 7.90 9.01

    1400 9.16 10.53 8.47 9.68

    1500 9.71 11.12 9.01 10.30

    BHT 0900 S GT

    EXAMPLE PART NUMBER - Horizontal

    BDT 0900 S GT

    EXAMPLE PART NUMBER - Diagonal

    Horizontal

    Diagonal

    K.D. FRAME TIES

    KD FRAME COMPONENTS

    TIE SPACER

    TYPE PRICE £ EACH

    SPZC 0.48

    Spacer

    FOOT PLATES Inc. Bolts

    TYPE PRICE £ EACH

    B1HGT 5.40

    TYPE PRICE £ EACH

    B2HZCR2HZC

    8.828.82

    TYPE PRICE £ EACH

    B3HZC 13.57

    TYPE PRICE £ EACH

    B4GX 26.04

    B1/B2 SHIM

    B3/B4 SHIM

    UPRIGHT PROTECTOR SHIM

    B2 FOOTPLATE

    B2 FOOTPLATE

    SKXL5225R

    SKXL5225R

    B1 FOOT PLATE B2/R2 FOOT PLATE

    B3 FOOT PLATE B4 FOOT PLATE

  • STARTERSTARTER KIT POST

    EXTENSIONEXT. KIT POST

    STARTERSTARTER KIT POST

    EXTENSIONEXT. KIT POST BARRIER RAIL NO SUPPORTS

    LENGTH CODE PRICE £ EACH

    0930 SSSRS150ZD0930OR 36.19

    1030 SSSRS150ZD1030OR 38.44

    1130 SSSRS150ZD1130OR 40.68

    1530 SSSRS150ZD1530OR 49.67

    2030 SSSRS150ZD2030OR 60.93

    2430 SSSRS150ZD2430OR 69.91

    2530 SSSRS150ZD2530OR 72.15

    LOW LEVEL POST STARTER KIT

    CODE PRICE £ EACH

    SSBRP400SS150ZDOR 223.33

    LOW LEVEL POST EXTENSION KIT

    CODE PRICE £ EACH

    SSBRP400ES150ZDOR 111.77

    HIGH LEVEL POST STARTER KIT

    CODE PRICE £ EACH

    SSBRPHSS150ZDOR 349.41

    HIGH LEVEL POST EXTENSION KIT

    CODE PRICE £ EACH

    SSBRPHES150ZDOR 174.86

    Starter kits comprising TWO rail posts and fixings.Extension kits comprise only ONE rail post and fixings.

    Note:Other sizes of Rack End Protection and Barrier Rail System - POA

    Minimum size - 500mmMaximum size - 2560mm

    BARRIER RAIL KIT

    Low level starter & extension kits

    High level starter & extension kits

    STARTERSTARTER KIT POST

    EXTENSIONEXT. KIT POST

    STARTERSTARTER KIT POST

    EXTENSIONEXT. KIT POST

    800mm

    400mm

    PAGE 18 Pallet Racking PricesJanuary 2019 Issue 1

    UPRIGHT PROTECTORS & BARRIER RAILS

    U TYPE PROTECTOR POST KIT

    CODE PRICE £ EACH

    SSPPKU400S150ZDOR 225.11

    L TYPE PROTECTOR POST KIT

    CODE PRICE £ EACH

    SSPPKL400S150ZDOR 228.58

    BARRIER RAIL NO SUPPORTS

    HEIGHT CODE PRICE £ EACH

    0930 SSSRS150ZD0930OR 36.19

    1130 SSSRS150ZD1130OR 40.68

    2030 SSSRS150ZD2030OR 60.93

    2430 SSSRS150ZD2430OR 69.91

    ‘U’ Type ‘L’ Type

    NOTE. Kit includes all fixings

    Order Post Kit with Barrier Rail to suit frame depth.

    RACK END PROTECTION KIT

    UPRIGHT PROTECTORS

    400MM HIGH PROTECTOR

    CODE PRICE £ EACH

    UP400OR 81.80

    RIGHT ANGLE PROTECTOR

    CODE PRICE £ EACH

    UPRA400OR 83.51

    UPRIGHT PROTECTOR CHANNEL

    HEIGHT CODE PRICE £ EACH

    425 UPC0425OR 48.12

    650 UPC0650OR 59.43

    950 UPC0950OR 76.62NOTE. REQUIRES 4 FLOOR FIXING

    BOLTS - FAS1515

    NOTE. Protector channel includes foam and fixing

    130 mm

    425, 650 and 950 mm

    163 mm

    400 mm

    200 mm

    400 mm

    200 mm

    FLOOR FIXING BOLT

    CODE PRICE £ EACH

    FAS1515 6.47