Page 1 of 3 -...
Transcript of Page 1 of 3 -...
Page 1 of 12 FBL-300
FBL-300 Slant Bed CNC Turning Center
Page 2 of 12 FBL-300
MACHINE FEATURES: 45 degree slant bed with rigid box ways structure, Fanuc Oi-TD control, A2-8 spindle nose, 10” hydraulic chuck, 12-station servo indexing turret, 3.07” bar capacity, FANUC 25 HP AC digital spindle motor, 2,500 rpm or optional 3,500 rpm spindle speed, programmable tailstock, and more.
SPECIFICATIONS: Capacity - Swing over bed (Z cover) .................................................... 25.7”
- Maximum turning diameter ................................................. 20"
- Maximum turning length ..................................................... 23.4" - Distance between centers .................................................. 29.4”
Spindle - Spindle nose (ASA) ............................................................ A2-8 - Maximum spindle speed ………………………………….. 2500 RPM (NN roller bearing) 3500 RPM (option, ball bearing)
- Bar capacity ....................................................................... 3.07" - Chuck size .......................................................................... 10" - Spindle motor (30 min. rating)... ........................................ 25 HP
Travel stroke - X axis ...................................................................................11.4"
- Z axis ................................................................................... 25.2"
Rapid travel - X axis ................................................................................... 787 IPM - Z axis ................................................................................... 787 IPM
Positioning - X axis ................................................................................... 0.0002” - Z axis ................................................................................... 0.0002” Repeatability - X axis ................................................................................... 0.0001”
- Z axis ................................................................................... 0.0001” Turret - Number of tools .................................................................. 12 station
- O.D. tool shank size ........................................................... 1” - Boring bar holder inner diameter ....................................... 1 3/4” - Boring bar bushing inner diameter ..................................... 3/8”, ½”, 5/8”, 3/4”, 1”
- Turret index (next tool)........................................................ 0.23 sec - Turret index 180 degree .................................................... 1.3 sec Tailstock - Tailstock travel .................................................................... 21.6”
- Quill stroke .......................................................................... 5.1" - Quill diameter...................................................................... 3.5"
- Quill taper ........................................................................... MT-4
- Programmable position & quill
General - Machine net weight ............................................................ 12,760 lbs. - Machine floor space w/ conveyor ...................................... 157" x 76"x77” - Power ................................................................................. AC 208V, 3 Phase, 100 AMP
Page 3 of 12 FBL-300
INVESTIMENT COST
MODEL: FBL-300 ................................................................................. $ 91,900.00 With Fanuc 0i-TD control, A2-8 spindle nose, 10”, 3-Jaw, hydraulic chuck, 12-station servo indexing turret, 3.07” bar capacity, 25 HP AC digital spindle motor, 2,500 rpm, NN (Roller bearings), programmable tailstock, etc.
STANDARD ACCESSORIES
STANDARD TOOLING
Automatic way lubrication system (1) hard jaw Coolant system (1) soft jaw Chips conveyor (1) 10” 3-jaw hydraulic chuck Chips bucket (12) OD tool mounting clamps
Programmable tailstock (5 ) boring bar holder 3-color cycle light (1) set Boring bar bushing 3/8”, ½”, 5/8”,3/4”,1” Work light (1) MT2, MT3 drill sleeve One set of leveling bolts and pads (1) MT-4 Live center Operation manual (1) Tool box with hand tools Programming manual Foot pedal for chuck clamp/unclamp
Foot pedal for tailstock Oil skimmer Renishaw HPMA automatic tool presetter
OPTIONAL ACCESSORIES /REPLACEMENTS: Parts catcher .............................................................................................................................. 2,200.00 Foot paddle for tailstock quill ............................................................................................................. 400.00 Collet chuck ............................................................................................................................... POR Oil mist collector .............................................................................................................................. 4,200.00 Upgrade to 12” hydraulic chuck ..................................................................................................... 1,800.00
Automatic door (pneumatic control) ............................................................................................... 2,500.00 Bar feeder interface ........................................................................................................................... 500.00 Upgrade to 90 PSI coolant pump ...................................................................................................... 550.00
Page 4 of 12 FBL-300
Spindle Torque Chart
Standard spindle with roller (NN) bearings and maximum 2,500 rpm Maximum torque: 614 NM (452 ft-lbs)@287 rpm
Optional Spindle with ball bearings and maximum 3,400 rpm
Maximum torque: 537 NM (397 lbs-ft) @ 328.5 rpm
Page 5 of 12 FBL-300
Work Range
12-Station Turret Tool Interference
Page 6 of 12 FBL-300
Tooling System
Floor Space
Page 7 of 12 FBL-300
Control Features
FANUC
Description 0i-TD
Controlled axis
Controlled axis : 8
Simultaneous controlled axis: 4
8.4” TFT LCD ●
Cs-axis control ●
Simply sym servo controlled ●
Inch/metric conversion ●
Over travel ●
Stored stroke check 1 ●
Stored stroke check 2 X
Stored stroke check 3 X
Stroke limit check before move ●
Chuck and tail stock barrier ●
Mirror image ●
Chamfering on/off ●
Backlash compensation ●
Backlash compensation for each
Rapid traverse and cutting feed
●
Stored pitch error compensation ●
Position switch ●
Operation 0iTD
Automatic operation (memory) ●
DNC operation ●
MDI operation ●
DNC operation with Cf card
Program number search ●
Sequence number search ●
Sequence number compare and stop ●
Program restart ●
Dry run ●
Single block ●
JOG feed (JOG) ●
Optional stop
Block skip ●
Manual reference position return ●
Manual hand feed rate *1,*10,*100 ●
Handle interruption ●
Skip function ●
Reference position return ●
Reference position return check ●
Page 8 of 12 FBL-300
FANUC
Description 0i-TD
2nd
reference position return ●
3rd
/4th
reference position return ●
Interpolation functions
Positioning ●
Linear interpolation ●
Circular interpolation ●
Dwell ●
Polar coordinate interpolation ●
Cylindrical interpolation △
Helical interpolation △
Threading/synchronous cutting ●
Multiple Threading ●
Threading retract ●
Continuous threading ●
Variable lead threading ●
Circular threading △
Polygon turning ●
Polygon machining with two spindles ●
Feed function
Rapid traverse tare ●
Rapid traverse override F0,25,50,100 % ●
Feed per minute ●
Feed per revolution ●
Tangential speed constant control ●
Linear acceleration/deceleration After
cutting feed interpolation
●
Feed rate override 0~150 % ●
Jog feed rate override ●
Override cancel ●
Manual per revolution feed ●
Rigid tapping ●
Program input
Label skip ●
Optional block skip ●
Program number O 4digits ●
Sequence number N 5digits ●
Absolute/incremental programming
Decimal point/Pocket
●
Rotary axis designation ●
Rotary axis roll over function ●
Coordinate system setting ●
Auto coordinate system setting ●
Direct input of coordinate system shift ●
Page 9 of 12 FBL-300
FANUC
Description 0i-TD
Workpiece coordinate system ●
Workpiece coordinate system preset ●
Direct drawing dimension programming ●
G code system A ●
B/C ●
Chamfering / corner R ●
Programmable data input ●
Sub program call ●
Custom macro B ●
Canned cycles ●
Multiple repetitive cycle ●
Multiple repetitive cycle Ⅱ ●
Canned cycles for drilling ●
Circular interpolation by R programming ●
Auxiliary/Spindle function
2nd
Auxiliary function : B8-digit ●
Auxiliary function lock ●
Spindle speed function ●
Constant surface speed control ●
Spindle speed override ●
Actual spindle speed output ●
Spindle speed fluctuation detection ●
Spindle orientation ●
Tool function / Tool compensation
Too offset pairs 64 pairs ●
Tool function:T8 digits ●
Tool offset ●
Tool nose radius compensation ●
Tool geometry/wear compensation ●
Tool life management ●
Tool offset counter input ●
Automatic tool offset ●
Direct input of tool offset value measure ●
Direct input of tool offset value measure B ●
Editing operation
1280M ●
Number of register programs 400 pairs ●
Part program editing ●
Program protect ●
Background editing ●
Extended parts program editing ●
Setting & display
Page 10 of 12 FBL-300
FANUC
Description 0i-TD
Status display ●
Current position display ●
Program display ●
Parameter setting and display ●
Self-diagnosis function ●
Alarm display ●
Alarm history display ●
Operator message history display ●
Help function ●
Run hour and parts count display ●
Actual cutting feed rate display ●
Display of spindle speed and T code at all
screens ●
Graphic display ●
Dynamic graphic display △
Data protection key △
45 Degree Slant Bed with Rigid Box Ways Design
Page 11 of 12 FBL-300 Servo Index Turret with curvic coupling
10” Hydraulic Chuck and Renishaw Tool Presetter are Standard Accessories.
Programmable Tailstock Quill & Position are Standard Equipment.
Page 12 of 12 FBL-300
Oil Skimmer and easy access coolant tank.
Price is F.O.B. Santa Fe Springs, CA or F.O.B. port of entry. Our responsibility ceases when delivery is made to the carrier. Any claim
for loss or damage must be handled by purchaser against carrier.
Price and specifications are subject to change without prior notice.
All list prices of optional accessories are good for new machine orders only.
Prices for in-field upgrades or retrofit options may vary from this price list.
Prices do not include local applicable tax.
Standard machine voltage is 230V /3PH/60 HZ only
ONE YEAR PARTS AND LABOR WARRANTY ON MACHINE
TWO YEARS PARTS AND LABOR WARRANTY ON CONTROL