Packing Procedure_rev 3A_saddle From Plate
-
Upload
ryan-maulana -
Category
Documents
-
view
214 -
download
0
Transcript of Packing Procedure_rev 3A_saddle From Plate
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
1/11
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
2/11
PT. PERTAMINA EP
MATINDOK GAS DEVELOPMENT PROJECT (MGDP)
TABULATION OF REVISION SHEET
SHEETREVISION
REMARKS SHEETREVISION
REMARKS1 2 3 3A 4 5 1 2 3 3A 4 5
1 X 37
2 X 38
3 X 394 X 40
ATTACHMENT 41
1 X 42
2 X X 43
3 X 44
4 X 45
5 X X 46
6 X X 477 X 48
8 49
9 50
10 51
11 52
12 53
13 54
14 5515 56
16 57
17 58
18 59
19 60
20 61
21 62
22 6323 64
24 65
25 66
26 67
27 68
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
3/11
PT. PERTAMINA EP
MATINDOK GAS DEVELOPMENT PROJECT (MGDP)
REVISION SHEET DESCRIPTION
NO PAGE SUBJECT DESCRIPTION OF CHANGE REV.
1 ALL ALL First issue 1
2 ALL ALL Issued for approval 2
3 ALL ALL Issued for construction 3
4 2,5,6 Packing Style Replace wooden support with steel support 3A
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
4/11
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
5/11
PT. PERTAMINA EP
MATINDOK GAS DEVELOPMENT PROJECT (MGDP)
1. GENERALThis procedure covers minimum requirements for packing after finish fabrication, paintingand before transportation from PT. BBI Workshop, Pasuruan, East Java.
2. APPLICABLE CODE AND STANDARDCustomer’s specs : MTDF-MS-300-SPE-3101 Rev. 3 (Spec. for pressure vessel)
: MTDF-MS-300-SPE-3110 Rev. 3 (Spec. for high alloy & clad PV)
Safety manual Doc. No. : OHSM-001-Rev.2 -ed.1.2011 Edition
3. APPLICABLE ITEM
NO. ITEM NO. EQUIPMENT
1. 340-T-1001 ACID GAS ABSORBER
2.340-D-1003 /340-T-1002
ACID GAS FLASH DRUM /FLASH GAS ABSORBER
3. 340-T-1003 AMINE STRIPPER COLUMN
4. 340-T-1004 H2S ABSORBER
5. 320-T-1001 WASH TOWER
4. PREPARATION4.1. Mobile crane / overhead crane capacity as per necessity.4.2. All consumable packing i.e. : Wooden skid, bolt & nut, wire rope, temporary cover,
wooden bandage & etc.4.3. Column shall be throughly cleaned inside and outside and free of all dirt and foreign
matter.
4.4. Place desicant bag in the inside of column according to preservation procedure(MTDF-SAS-MS-0510-C1008-1002)
4.5. All flange faces shall be sealed with cover plate blinds, machined surface, all threads& all surface not painted shall be coated with a suitable anti corrosive material(grease), an appropriate gasket shall be used between the flange face cover and thecover.
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
6/11
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
7/11
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
8/11
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
9/11
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
10/11
-
8/20/2019 Packing Procedure_rev 3A_saddle From Plate
11/11