P4 - Ergo - Manual Material Handling
-
Upload
yudha-adi-kusuma -
Category
Documents
-
view
218 -
download
0
Transcript of P4 - Ergo - Manual Material Handling
-
7/30/2019 P4 - Ergo - Manual Material Handling
1/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
2/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
3/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
4/28
(See video about MH Safety)
-
7/30/2019 P4 - Ergo - Manual Material Handling
5/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
6/28
remember ?? HR,energ
stress level, load index combine
-
7/30/2019 P4 - Ergo - Manual Material Handling
7/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
8/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
9/28
1. MH activities other than lifting are minimaland
, especially when repetitivelifting tasks are performed.
2. The revised lifting equation
, such as
unexpectedly heavy loads, slips, or falls.3. The revised lifting equation as
to assess tasks involving
or
4. The revised lifting equatiothe
(pcoefficient of static frictioshoe sole and the working
5. The revised lifting equatiolifting and lowering tasks
-
7/30/2019 P4 - Ergo - Manual Material Handling
10/28
RWL (Recommended WeightLimit) adalah
yang dapatdiangkat oleh manusia
meskipun pekerjaantersebut dilakukan secaradan dalam
LI (Lifting Index)digununtuk mengetahui
apakaproses pengangkata
menimbulkan
-
7/30/2019 P4 - Ergo - Manual Material Handling
11/28
Help identifypotentiallyhazardouslifting jobs.
Help indesign/modification
process.
Help priorevaluatiolifting ta
-
7/30/2019 P4 - Ergo - Manual Material Handling
12/28
LC : konstanta pembebanan
HM : faktor pengali horisontal
VM : faktor pengali vertikal
DM : faktor pengali perpindahan
AM : faktor pengali asimentri
FM : faktor pengali frekuensi
CM : faktor pengali kopling (hand
-
7/30/2019 P4 - Ergo - Manual Material Handling
13/28
: weight of the object to be lifte(in pounds or kilograms), including the container
(acceptable to 75% of female population)
-
7/30/2019 P4 - Ergo - Manual Material Handling
14/28
H distance of the handfrom the mid-point betwe
Measure at the origin & dof lift.
-
7/30/2019 P4 - Ergo - Manual Material Handling
15/28
V distance of the handthe floor.
Measure at the origin & dof lift.
-
7/30/2019 P4 - Ergo - Manual Material Handling
16/28
D absolute value of thbetween vertical heights destination and origin of t
-
7/30/2019 P4 - Ergo - Manual Material Handling
17/28
A (asymmetry angle) tof the load relative to the
mid-sagittal plane, as defneutral body position.
Measure at the origin & d
of lift.
-
7/30/2019 P4 - Ergo - Manual Material Handling
18/28
F average number of liminute over a 15 minute p
Duration is classified as :Short (1 hour)Moderate (1-2 hours)Long (2-8 hours)
-
7/30/2019 P4 - Ergo - Manual Material Handling
19/28
C classification of the
the hand-to-object coupl
handle, cut-out, or grip).
-
7/30/2019 P4 - Ergo - Manual Material Handling
20/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
21/28
Jika LI 1 tidak mengandung resiko cidera tulang bela
Jika LI > 1 mengandung resiko cidera tulang belakang.
-
7/30/2019 P4 - Ergo - Manual Material Handling
22/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
23/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
24/28
-
7/30/2019 P4 - Ergo - Manual Material Handling
25/28
LC = 51 lbs
HM = 10 / H = 10 / 23 = 0,43 inches
VM = 1 - (0,0075|V-30|) = 1 - (0,0075|15-30|) = 0,8875
DM= 0,82 + (1,8/D) = 0,82 + (1,8/(|15-63|)) = 0,8575
AM = 1 - (0,0032A) = 1 - (0,0032*0) = 1
FM = 1 (F
-
7/30/2019 P4 - Ergo - Manual Material Handling
26/28
LC = 51 lbs
HM = 10 / H = 10 / 23 = 0,43 inches
VM = 1 - (0,0075|V-30|) = 1 - (0,0075|63-30|) = 0,7525
DM = 0,82 + (1,8/D) = 0,82 + (1,8/(|15-63|) = 0,8575
AM = 1 - (0,0032A) = 1 - (0,0032*0) = 1
FM = 1 (F
-
7/30/2019 P4 - Ergo - Manual Material Handling
27/28
More importantly, NIOSH equation gives ways to reduce injury
reduce horizontal distance
keep load at waist height
reduce distance to be travelled
reduce twisting
add handles
reduce frequency of lifts
-
7/30/2019 P4 - Ergo - Manual Material Handling
28/28