Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated...
Transcript of Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated...
![Page 1: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/1.jpg)
Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation
Through New Thermoplastic Pipe Applications
September 17, 2015
John Barnes, Technology Vice President, INVISTA [email protected]
![Page 2: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/2.jpg)
• About INVISTA • Flow line material challenges • Flow line landscape • Overcoming contradictions of nylon 6,6
– Advantages – Challenges
• Short-term pressure ratings – Development process – Determining value and practicality
OVERVIEW
©2015 INVISTA. 2
![Page 3: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/3.jpg)
INVISTA • 75+ years in nylon 6,6 technology • Expertise in high-temperature, highly corrosive environments • A Koch company Koch Industries
Raptor™ Nylon Pipe – Made of Tough.™
• Oil and gas connections include: • Koch Supply & Trading • Koch Exploration • Koch Pipeline • Koch Minerals
• Koch Energy Services • John Zink Hamworthy Combustion • Frac-Chem • Raptor™ nylon pipe
©2015 INVISTA. 3
![Page 4: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/4.jpg)
• Fluid environment – Hydrocarbons – Natural gas – Produced & flowback water pH 6-8
• Water, salts, metals, radionuclides, production chemicals. • Benzene, naphthalene, toluene, phenanthrene, pentachlorophenol, glycols, alcohols,
halogens, amides, aromatic hydrocarbons – Solids
• Service environment
– Oilpatch pressures (<400 PSI) and temperatures (up to 200°F) – Toughness factor
• Practical considerations – Ability to be coiled – Needs to be joinable/weldable (low cost option) – No special tools for installation
COLLECTION AND RETURN LINES – MATERIALS CHALLENGES
©2015 INVISTA. 4
![Page 5: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/5.jpg)
MATERIALS AVAILABLE TO THE MARKET
©2015 INVISTA. 5
HDPE Composites Fiberglass Steel Standard nylon 6,6
Temperature 140°F 140-‐180°F 140-‐200°F >200°F 180-‐200°F
Pressure -‐ ++ ++ +++ +
Hydrolysis + + + + -‐
Hydrocarbon compa=bility -‐ + ++ + +
UV stable + + + + -‐
Coilable + + -‐ -‐ +
Simple bonding + -‐ -‐ -‐ -‐
Abrasion resistant -‐ -‐ -‐ + +
Toughness factor + -‐ -‐ + +
% of steel installed cost 40-‐60% 50-‐80% 60% 100% NA
![Page 6: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/6.jpg)
OVERCOMING CONTRADICTIONS WITH NYLON 6,6
![Page 7: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/7.jpg)
• Hydrocarbons – “Resistant to most solvents, insoluble in esters, ketones, aromatic hydrocarbons,
chlorinated hydrocarbons, alkalis…excellent resistance to oils, fuels, greases, fats.”1
– Commonly used in auto oil pans – Raptor™ nylon pipe is compatible with hydrocarbons (no derate required;
sour service performance equivalent to water)
• Abrasion resistance – Used in high abrasion/high energy absorption applications in fiber form such as
military uniforms, parachutes, paper maker felts, timing belt cover fabrics and airbags2
• Properties at temperature
– Melting temperature 505°F, Tg 149°F, Deflection temperature under load 118°F
NYLON 6,6 – ESTABLISHED ADVANTAGES
1 – Polymer Technology Dictionary, T. Whelan, Chapman and Hall, 1994 2 – Handbook of Tensile Properties of Textile and Technical Fibres, AR. Bunsell, Elsevier, 2009
©2015 INVISTA. 7
![Page 8: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/8.jpg)
• UV stability – General issue with polymers – Raptor™ nylon pipe has >2% carbon black additive to improve property
retention
• Hydrolysis
• Practical considerations – Needs to be joinable/weldable – Ability to be coiled – Easily transported
NYLON 6,6 – PREVIOUS GENERATIONS
©2015 INVISTA. 8
![Page 9: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/9.jpg)
HYDROLYSIS AGING
Hydrolysis resistance of Raptor™ nylon pipe
Standard PA66 at pH7, 171°F; Kohan – Nylon Handbook, 1995, pg 339 HR PA66 at pH7, 171°F; Kohan – Nylon Handbook, 1995, pg 339 Raptor™ nylon pipe hydrostable at pH6.5, 178°F
©2015 INVISTA. 9
![Page 10: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/10.jpg)
• Goal: ~400 psi and ability to be butt-fused • In unmodified nylons, as reinforcement content is increased to improve
burst strength, the tensile strength of a butt-fused joint decreases – Melt flow reduced during fusion as viscosity increases – Rapid re-crystallization rate of nylon 6,6 in cooling exacerbates the issue
ENGINEERING PRESSURE AND FUSION
30% glass filled nylon 6,6
Raptor™ nylon pipe
Original Yield Strength
100% 100%
Fusion Strength 50% 100%
©2015 INVISTA. 10
![Page 11: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/11.jpg)
• Goal: 7,000+ PSI quick burst stress and inside coil diameter <100” – Achieved through tailored stiffness characteristics
• Standard transportation logistics required coiling and high pipe flexibility – Self-contained coils without the hassle of reels at the job site
ENGINEERING STRENGTH AND FLEXIBILITY
©2015 INVISTA. 11
![Page 12: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/12.jpg)
Advantages of nylon • 4x better abrasion resistance than HDPE • ~6x better impact resistance than HDPE, 20x better than composite • >2x pressure ratings than HDPE in hydrocarbon service • Utilizes off-the-shelf fusion equipment and can be installed with
operator’s preferred crews • 1,000-foot coils; 6 coils per truckload
POLYMER DEVELOPMENT
©2015 INVISTA. 12
![Page 13: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/13.jpg)
HDPE Composites Fiberglass Steel Raptor™ nylon pipe
Temperature 140°F 140-‐180°F 140-‐200°F >200°F 180-‐200°F
Pressure -‐ ++ ++ +++ +
Hydrolysis + + + + +
Hydrocarbon compa=bility -‐ + ++ + ++
UV stable + + + + +
Coilable + + -‐ -‐ +
Simple bonding + -‐ -‐ -‐ +
Abrasion resistant -‐ -‐ -‐ + ++
Toughness factor + -‐ -‐ + ++
% of steel installed cost 40-‐60% 50-‐80% 60% 100% 40-‐60%
MATERIALS AVAILABLE TO THE MARKET
©2015 INVISTA. 13
![Page 14: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/14.jpg)
DEVELOPMENT OF SHORT-TERM PRESSURES – A PHENOMENON TO NYLON 6,6
![Page 15: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/15.jpg)
MATERIAL BEHAVIOR OVER TIME & PRESSURE
©2015 INVISTA. 15
RaptorTM nylon pipe – long-‐term hydrostaFc performance with temperature and moisture
Fully saturated, in water
![Page 16: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/16.jpg)
DEVELOPMENT OF SHORT-TERM PRESSURE MODELS
©2015 INVISTA. 16
Tensile Yield Stren
gth (PSI)
Moisture Content (%)
Reduc=on in yield and tensile strength is accompanied with an increase in strain at break, and a resul=ng increase in toughness
![Page 17: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/17.jpg)
DEVELOPMENT OF SHORT-TERM PRESSURE MODELS
©2015 INVISTA. 17
176°F
73°F
Moisture absorpFon, 3” DR11 Raptor TM nylon pipe, fully immersed in water
![Page 18: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/18.jpg)
• Goal: Leverage well-head pressure declines during first year of operation with strength of unsaturated Raptor™ nylon pipe
DEVELOPMENT OF SHORT-TERM PRESSURE MODELS
©2015 INVISTA. 18
Flowback Produced water
5 -‐ DEVELOPMENT OF FRAMEWORK FOR PREDICTING WATER PRODUCTION FROM OIL AND GAS WELLS IN WATTENBERG FIELD, COLORADO, Bing Bai, Department of Civil and Environmental Engineering, MSc thesis, Colorado State University 2012
Horizontal well – water producFon model 5
![Page 19: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/19.jpg)
DEVELOPMENT OF SHORT-TERM PRESSURE MODELS
©2015 INVISTA. 19
RaptorTM nylon pipe – long-‐term hydrostaFc performance with temperature and moisture
As made 73°F
Fully saturated, in water
![Page 20: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/20.jpg)
DEVELOPMENT OF SHORT-TERM PRESSURE MODELS
©2015 INVISTA. 20
![Page 21: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/21.jpg)
Design considerations • Could a short-term pressure model bring new value to the well? • Can short-term design protocols be established to run alongside
conventional long-term HDB engineering design?
SHORT-TERM PRESSURE MODEL
©2015 INVISTA. 21
![Page 22: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/22.jpg)
Disclaimer: The data and material presented were derived from INVISTA internal studies and third-party labs commissioned by INVISTA, and are provided for informational purposes only. INVISTA does not provide any representation or warranty with respect to the standards used or applied in deriving such data and material, the statistical significance of such data and material or the reliability, accuracy, or fitness of such data and material for any purpose whatsoever. All such data and material are the property of INVISTA and nothing herein shall be construed as authorization or license to use, print, or distribute any such data or material. INVISTA disclaims any liability whatsoever with respect to the use of any of the data or material contained herein. Raptor™ is a trademark of INVISTA. ©2015 INVISTA.
![Page 23: Overcoming Challenges Associated With Matching Wellhead ... · Overcoming Challenges Associated With Matching Wellhead Pressure Throughout The Well Operation Through New Thermoplastic](https://reader034.fdocuments.in/reader034/viewer/2022042102/5e7f8ef48485990d2127b785/html5/thumbnails/23.jpg)
Q&A
MADE OF TOUGH.™