Outdoor Rubber Sports Flooring - Rephouse · Waterpermeability DIN 18035 Part 6 Impermeable...

2
Decoflex™ D8 Specification www.rephouse.com Outdoor Rubber Sports Flooring Product Decoflex™ D8 Outdoor Sports Flooring Description Prefabricated roll composed of synthetic coloured EPDM rubber granules and an MDI polyurethane resin binder Uses Sports surfacing - tennis, basketball, volleyball, badminton, netball, 6-a-side soccer, handball, etc. Thickness 8 mm Length of roll to suit job site (please specify) Width of roll 1.25 m Test Description Test Method Decoflex™ D8 Standard Deformation +40˚C DIN 18035 Part 6 0.44 mm Force Reduction +40˚C DIN 18035 Part 6 16% Sliding Behaviour DIN 18035 Part 6 Sliding Coefficient Dry 0.86 Wet 0.63 Ball Rebound DIN 18035 Part 6 100% Waterpermeability DIN 18035 Part 6 Impermeable Abrasion Resistance DIN 18035 Part 6 rV = 6.8 Indentation Behaviour DIN 18035 Part 6 Maximum Indentation when loaded 2.0 mm Remaining Indentation 0.18 mm Flammability DIN 51960 Class 1 Tensile Strength DIN 18035 Part 6 1.14 N/mm 2 Elongation at Break DIN 18035 Part 6 49% Deformation Modulus DIN 18035 Part 6 4.7 N/mm 2

Transcript of Outdoor Rubber Sports Flooring - Rephouse · Waterpermeability DIN 18035 Part 6 Impermeable...

  • Decoflex™ D8Specification

    www.rephouse.com

    Outdoor Rubber Sports FlooringProduct Decoflex™D8OutdoorSportsFlooring

    Description PrefabricatedrollcomposedofsyntheticcolouredEPDMrubber granulesandanMDIpolyurethaneresinbinder

    Uses Sportssurfacing-tennis,basketball,volleyball,badminton, netball,6-a-sidesoccer,handball,etc.

    Thickness 8mm

    Length of roll tosuitjobsite(pleasespecify)

    Width of roll 1.25m

    Test Description Test Method Decoflex™ D8

    StandardDeformation+40˚C DIN18035Part6 0.44mm

    ForceReduction+40˚C DIN18035Part6 16%

    SlidingBehaviour DIN18035Part6 SlidingCoefficient Dry 0.86 Wet 0.63

    BallRebound DIN18035Part6 100%

    Waterpermeability DIN18035Part6 Impermeable

    AbrasionResistance DIN18035Part6 rV=6.8

    IndentationBehaviour DIN18035Part6 MaximumIndentationwhenloaded 2.0mm RemainingIndentation 0.18mm

    Flammability DIN51960 Class1

    TensileStrength DIN18035Part6 1.14N/mm2

    ElongationatBreak DIN18035Part6 49%

    DeformationModulus DIN18035Part6 4.7N/mm2

  • web | www.rephouse.comemail | [email protected]

    Capri Blue

    Brown

    Telegray

    Red

    Signal Green

    Standard Colors

    Earth Yellow

    Gray

    Black

    Green

    Blue


Leak detector VAKUMATIK Type: IIIF R325 · EN 12285-1 / DIN 6608 / Part 2 : EN 12285-2 / DIN 6616 Form A DIN 6624 / Part 2 ; DIN 6618 DIN 6623 / Part 2+4 ; DIN 6619 / Part 2 : Part

Leak detector VAKUMATIK Type: IIIF R325 · EN 12285-1 / DIN 6608 / Part 2 : EN 12285-2 / DIN 6616 Form A DIN 6624 / Part 2 ; DIN 6618 DIN 6623 / Part 2+4 ; DIN 6619 / Part 2 : Part

DIN 604 - New Fastener LLCDIN 267 Part 10 DIN 267 Part O DIN 555 DIN 962 DIN ISO 898 Part 1 DIN ISO 4759 Part 1 Former editions DIN 565 Supplement: 10.26; DIN 604 Part 1: 01.41, 05.53,

DIN 604 - New Fastener LLCDIN 267 Part 10 DIN 267 Part O DIN 555 DIN 962 DIN ISO 898 Part 1 DIN ISO 4759 Part 1 Former editions DIN 565 Supplement: 10.26; DIN 604 Part 1: 01.41, 05.53,

DIN 6914 - New Fastener · DIN 18 800 Part I, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DIN 6918 washers. 2 288 Dimensions ... DIN 6915 hexagon screw DIN 6914

DIN 6914 - New Fastener · DIN 18 800 Part I, together with DIN 6915 hexagon nuts and DIN 6916, DIN 6917 or DIN 6918 washers. 2 288 Dimensions ... DIN 6915 hexagon screw DIN 6914

DIN 3962 PART 2

DIN 3962 PART 2

Din 15019 Part 2 Tipping Conditions

Din 15019 Part 2 Tipping Conditions

DIN 937 - New Fastener LLC · 2013-03-30 · DIN 267 Part 92) shall apply with regard to electroplating. DIN 267 Part 10 shall apply with regard to hot-dip galvanizing. DIN 267 Part

DIN 937 - New Fastener LLC · 2013-03-30 · DIN 267 Part 92) shall apply with regard to electroplating. DIN 267 Part 10 shall apply with regard to hot-dip galvanizing. DIN 267 Part

Tube Fitting for ISO8434 Part 1& Din 2353 Part 1 Din 2353kosmoent.com/download/Shinilace_DIN_Type.compressed.pdf · 2017. 7. 7. · Information for DIN 2353 SHINILACE CO., LTD. Seamless

Tube Fitting for ISO8434 Part 1& Din 2353 Part 1 Din 2353kosmoent.com/download/Shinilace_DIN_Type.compressed.pdf · 2017. 7. 7. · Information for DIN 2353 SHINILACE CO., LTD. Seamless

Din 18300 Part c

Din 18300 Part c

DIN 608 - New Fastener LLC3 Technical delivery conditions DIN 608 Steel according to DIN 267 Part 1 DIN 13 Part 13 3.6 or 4.6 at manufacturer's discretion DIN ISO 898 Part 1 C (previous

DIN 608 - New Fastener LLC3 Technical delivery conditions DIN 608 Steel according to DIN 267 Part 1 DIN 13 Part 13 3.6 or 4.6 at manufacturer's discretion DIN ISO 898 Part 1 C (previous

DIN EN 288 - Part 1.pdf

DIN EN 288 - Part 1.pdf

DIN 69871-Atolerance AT 3 DIN 7178 part 1 and DIN 2080 part 1. - Other tolerances according to DIN 7160 and 7168. - Taper surface roughness RZ

DIN 69871-Atolerance AT 3 DIN 7178 part 1 and DIN 2080 part 1. - Other tolerances according to DIN 7160 and 7168. - Taper surface roughness RZ

Din 22131 Part 1

Din 22131 Part 1

DIN · Pfaudler DIN reactors CE Meet the following standards: DIN 28 130, part 2 assembly of components DIN 28 136 reactors type CE DIN 28 137, part 2 agitator flange DIN 28 157 impeller

DIN · Pfaudler DIN reactors CE Meet the following standards: DIN 28 130, part 2 assembly of components DIN 28 136 reactors type CE DIN 28 137, part 2 agitator flange DIN 28 157 impeller

DIN 8563 (Part 2)

DIN 8563 (Part 2)

DIN-3998 Part 2

DIN-3998 Part 2

DIN 15018 Part 1

DIN 15018 Part 1

DIN 863 PART 4

DIN 863 PART 4

DIN 906 - New Fastener LLC · DIN 13 Part 12, DIN 158, DIN 3858 or ISO 228 Part 1. Since tightness is a function of pressure, temperature, the materials involved and the fluid with

DIN 906 - New Fastener LLC · DIN 13 Part 12, DIN 158, DIN 3858 or ISO 228 Part 1. Since tightness is a function of pressure, temperature, the materials involved and the fluid with

SPORTFLEX SUPER X 720 - Urbanitourbanito.ro/wp-content/uploads/2018/04/Sportflex_SuperX.pdf · Sportflex Super X 720 satisfies the limitations imposed by the German DIN 18035-6 Standard

SPORTFLEX SUPER X 720 - Urbanitourbanito.ro/wp-content/uploads/2018/04/Sportflex_SuperX.pdf · Sportflex Super X 720 satisfies the limitations imposed by the German DIN 18035-6 Standard

DIN 863 PART 3

DIN 863 PART 3