Tube Fitting for ISO8434 Part 1& Din 2353 Part 1 Din...
Transcript of Tube Fitting for ISO8434 Part 1& Din 2353 Part 1 Din...
Catalog No. S-310TF Aug.2010
Tube Fitting for ISO8434 Part 1& Din 2353
With LL, L Series and S Series
Tube Fitting for ISO8434 Part 1& Din 2353
With LL, L Series and S Series
Human & TechnologySHINILACE CO., LTD.SHINILACE CO., LTD.
2 SHINILACE CO., LTD.
SHINILACEPRODUCT
SHINILACE CO., LTD.SHINILACE CO., LTD.
SHINILACE CO., LTD. 3
GREETING
We, all staffs SHINILACE CO., LTD.
Deeply thank you for your continu-ous support and encouragement. As we have accomplished high growth for short time since the foundation in 1998, we have supplied our cus-tomers the best product at the most proper price with the best delivery and service under the motto,”Let’s Do Our Best.” On the basis of quality management system, we are making continuous efforts to make our cus-tomers satisfied, focusing on their need, with staffs’ ideas and guaran-tee on the products by increasing working efficiency of all staffs.
We, all staffs with one accord, will focus on the customers’ satisfaction with continuous research and devel-opment, increase of quality and tech-nological stability in order to occupy technologically higher position prior to others in the 21st market on the basis of continuous efforts and faith fulness. We expect your endless in-terest and encouragement to our SHINILACE CO., LTD.
All staffs of SHINILACE CO., LTD.
Information for DIN 2353SHINILACE CO., LTD.
4 SHINILACE CO., LTD.
Material Pressure Ranges
Working Temperature
Pressure reduction with temperature
Series
LL
L
S
Steel /Brass* 1.4571 (SS316)Size4-126-18
-22-426-14
16-3038
Size4-126-15
18-2222-426-14
16-3038
Pressure100 bar315 bar
-160 bar630 bar400 bar315 bar
Pressure100 bar250 bar160 bar100 bar630 bar400 bar315 bar
Material
Material
Materials offittings
Steel
NBR (e.g.Perbunan®)
Steel
Brass
FPM (e.g.Viton®)
Brass
Stainless Steel
PTEF (e.g.Teflon®)
1.45711.45711.45711.45711.45711.4571
Temperature-40°C to 120°C (DIN3859)
-60°C to 175°C-60°C to 400°C (DIN17440)
Temperature-35°C to 100°C-25°C to 200°C-60°C to 240°C
TemperatureRange
-40°C to 120°C-60°C to 175°C-60°C to 20°C
50°C100°C200°C300°C400°C
ReducationOf Pressure
-30%
-4%11%20%29%33%
1. For fitting materials
Following pressure reduction is applicable to the rating in the fitting material pressure range for the elevated temperature.
2. For Elastomer seals
Note : temperature limits can greatly depend on the medium.
Note : When seal is used in the fitting, compare allowable working temperature between seal and fitting material and apply the lowest temperature.
Brass* : Pressure range of brass should be adapted 30% below of the steel
Caution! for certain types of fittings the nominal pressure differ from those shown above, in which case the ratings indicated for the individual types should be observed! the maximum pressure of tube fitting type opproval in 250 bar (DNV, ASB, LR etc.)
Ordering Information
Example 1. Tube to Tube Connection DT - 12 S - S316 ① ② ③ ⑥
Example 3. Tube to Tube Port DEW - 16 S - S316 ① ② ③ ⑥
Example 5. Banjo Fitting DWH - 16 S - 04G - S316 ① ② ③ ④ ⑥
Example 2. Tube to Thread Connection DMC - 10 L - 02G ED - S316 ① ②③ ④ ⑤ ⑥
Example 4. Tube Port to Female Port DMGE - 16 S - 04G ED - STEEL ① ② ③ ④ ⑤ ⑥
Example 6. Male / Female Adaptor MFAE 04G - 03G - STEEL ① ④ ⑥
· Tube O.D Desingnator
· Thread Designator (Pipe Tread)
· Thread Designator (Metric Thead)
· Series DesignatorTube O.D.Identifier
4mm04 06
6mm08
8mm38
38mm42
42mm............ Series
Identifier
Very Light
LL SL
Light Heavy
Nominal Size
Metric Size
Identifier
Identifier
Carbon Steel (DIN 3859)Stainless Steel
ANSI/ASME 1.20.1-1983NPT
DIN 158Taper (keg)
DIN-13Parallel
DIN-ISO228(DIN 259)BSP/Parallel
DIN-2999BSP Tapered
7/16-20UNF
04U
Steel
9/16-18UNF
06U
3/4-16UNF
08U
4571
DIN 17440 / 1.4571
7/8-14UNF
10U
1 1/16-12UN
12U
S316/316L
ASTM A479 TYPE 316
1 5/16-12UN
16U
1 5/8-12UN
20U
Brass
Brass
M10×1.0
M10K
M10
M8×1.0
M8K
M8
1/8"
01N
01G
01R
M12×1.5
M12K
M12
1/4"
02N
02G
02R
M14×1.5
M14K
M12
3/8"
03N
03G
03R
......
......
......
1/2"
04N
04G
04R
M27×2.0
M27
3/4"
06N
06G
06R
M33×2.0
M33
1"
08N
08G
08R
M42×2.0
M42
1 1/4"
10N
10G
10R
M48×2.0
M48
1 1/2"
12N
12G
12R
· Thread Designator (Unified)
· Material Designator
Size
Material
Identifier
Identifier
Name of Fitting : "Refer to Index"Tube O.D : See Tube O.D DesignatorSeries : See Series DesignatorThread Connection : See Thread DesignatorElastomer Seal : ED-Ring (Refer to Seal materials) Material : See Material Designator
①②③ ④ ⑤ ⑥
SHINILACE CO., LTD.
Information for DIN 2353
SHINILACE CO., LTD. 5
Stud Ends & Tapped Hole Forms for tube FittingsThis standard specifies dimensions for stud ends and tepped holes with metric fine pitch thread and pipe thread for use with compression fittings, valves and screw plugs, general outlay of types.
*ED-Ring & O-Ring Seals made of NBR Standard (-20°C to 90°C)Available made of Viton Upon Request (-20°C to 200°C)
Forms of Stud EndsForm A (DIN 3852 Part 1+2)with sealing dy washer
Form B (DIN 3852 Part 1+2)with sealing by compressionagainst face of body
Form C (DIN 3852 Part 1+2)with sealing in tapered thread
Form E (DIN 3852 Part 11)with sealing by DIN 3869 ring seals ( *ED-Ring)
Form F (DIN 3852 Part 3)with sealing by ( *O-Ring)
Metric (keg) DIN 158B.S.P (keg) DIN 2999NPT (keg) ANSI/ASME B1.20.1-1983
Thread size for
From A, Band E, F
stud endsd1
From Cstud ends
d2
d3 d4 -0.2 0 d5
±0.1
M8×1.0 keg.M8×1.0 - - 10.9
14 13.9 12.9
17 16.9 16.9
19 18.9 18.9
21 21.9 20.9
23 23.9 22.9
25 25.9 24.9
27 26.9 26.9
31 31.9 30.9
32 31.9 31.9
39 39.9 37.9
49 49.9 47.9
55 54.9 54.9
14 13.9 -
18 18.9 -
22 21.9 -
26 26.9 -
32 31.9 -
39 39.9 -
49 49.9 -
55 54.9 -
- - 14.4
- - 17.6
- - 22.3
- - 25.5
- - 31.9
- - 38.2
- - 47.7
- - -
M10×1.0 M10×1.0 keg.
M12×1.5 M12×1.5 keg.
M14×1.5 M14×1.5 keg.
M16×1.5 M16×1.5 keg.
M18×1.5 M18×1.5 keg.
M20×1.5 M20×1.5 keg.
M22×1.5
M26×1.5 -
M27×2.0 -
M33×2.0 -
M42×2.0 -
M48×2.0 -
G 1/8 1/8 NPT
G 1/4 1/4 NPT
G 3/8 3/8 NPT
G 1/2 1/2 NPT
G 3/4 3/4 NPT
G 1 1 NPT
G 1 1/4 1 1/4 NPT
G 1 1/2 1 1/2 NPT
7/6-20UNF R 1/8 keg.
9/6-18UNF R 1/4 keg.
3/4-16UNF R 3/8 keg.
7/8-14UNF R 1/2 keg.
1 1/6-12UN R 3/4 keg.
1 5/6-12UN R 1 keg.
1 5/8-12UN R 1 1/4 keg.
- R 1 1/2 keg.
M22×1.5 keg.
Sectional View
Sectional View
Cutting Face
ED-Ring
Sectional View
Sectional View
6 SHINILACE CO., LTD.
Information for DIN 2353SHINILACE CO., LTD.
Information for DIN 2353SHINILACE CO., LTD.
Seamless precision stainless steel 1.4571Stainless steel tubes (e.g. 1.4571), code X6CrNiMoTi 17122, must be cold-drawn and seamless, heat-treated without formation of scales, type m to DIN 17458, provide tolerances to DIN 2391, Part1.The following tube wall thickness are suitable for use:
· Reinforce tube inserts are recommended where thin-walled tubes are subject to severe strains.* Permissible variation in wall thickness (DIN 2391)
· Calculated pressures to DIN 2413 part Ⅰ for primarily static load conditions· Yield point (K) : 245N/mm² (to DIN 17458)· Safety factor (S) : 1.5· Allowance factor (C) :
P= 20 · K · t · c (bar) S·D P= 20 · K · t · c (bar) S·(D+t·c)
· Calculated pressures to DIN 2413 part Ⅲ for dynamic load conditions· Yield point (K) : 216N/mm² (assumed value)· Safety factor (S) : 1.5
Note For a diameter ratio of O.D/I.D>1.35,calculation made to DIN 2413 part Ⅲ and based on a pulsating fatigue limit of 225 N/mm² Temperature range : -60°C to + 400°C Reduction in pressure for higher temperatures
Factor for consideration of wall thickness divergence for static and dynamic stress.
Calculation Pressures:
Tube Range
Factor(C)
4mm / 5mm
0.8 0.85 0.9
Larger6mm / 8mm
Design PressureDIN 2413
TubeO.D(D)
20
25
28
35
38
22
30
20
25
28
35
38
42
25
28
3535
22
30
mm
20
25
28
35
38
22
30
20
25
28
35
38
42
25
Tolerance
mm
±0.15
±0.2
±0.15
±0.08
±0.08
±0.08
±0.08
±0.08
Wall *Thickness
(t)mm2.5
3.5
3
2
5
4
3
· 2
2.5
3
7
6
5
5
3
4
· 2
2.5
6
5
4.5
4
2.5
3
4
34
4
2
3
2.5
45
Weight
kg/m1.095
1.433
1.426
2.092
1.874
1.002
1.408
2.501
2.876
1.644
3.742
4.131
1.277
1.600
1.152
2.307
2.402
1.220
1.635
1.302
2.028
2.018
4.351
4.807
1.594
2.605
2.392
3.405
5.4262.9303.798
3.400
3.086
Ⅰ
bar
408
328
378
315
267
294
458
415
168
342
318
458
235
418
342
334
353
210
294
210
401
373
263
321
252
309
427210280
391
336
368357
Ⅲbar
392
315
363
253
218
238
439
399
141
328
305
439
193
402
328
267
281
174
238
174
385
358
214
309
206
249
410174227
376
269
291343
Design PressureDIN 2413
TubeO.D(D)
4
6
8
15
18
16
10
12
mm
4
6
8
15
18
16
10
12
6
8
15
18
16
10
12
6
8
15
18
10
12
10
1212
Wall *Thickness
(t)mm0.75
1
1
1.5
· 1.5
1
· 1
2
2
2.5
2.5
2.5
2
2
1
1.5
1.5
2
2
2
1.5
1.5
2.25
2.5
3
3
3
2.5
2.5
3
33.5
Weight
kg/m0.061
0.125
0.175
0.225
0.275
0.200
0.300
0.401
0.501
0.507
0.701
0.620
0.075
0.168
0.244
0.319
0.394
0.211
0.344
0.469
0.594
0.651
0.845
0.801
0.525
0.615
0.782
0.977
0.9671.126
0.744
0.901
Ⅰ
bar
372
347
294
245
662
526
458
391
294
368
245
526
412
357
368
725
630
551
474
321
370
327
638
551
391
433
333391
624
458
391500
Ⅲ
bar
357
277
238
201
637
505
439
376
238
291
201
505
396
343
291
696
604
529
455
309
355
262
612
529
376
416
320376
599
439
376480
Tolerance
mm
±0.1
±0.08
±0.08
±0.08
±0.08
±0.1
±0.1
±0.1
SHINILACE CO., LTD. 7
11 G E G-V 111...112... P-GV
Tube To Female Port PAGE EO EMB VOLZ VOSS WALPRO
DUStraight Union
DOM-U/MMale Connector(UNF/Metric) with O-Ring
DMC-RMale Connector(BSP Papered)
DMC-GMale Connector(BSP Paralled)
DMC-MMale Connector(Metric Paralled)
DMC-GEDMale Connector(BSP Paralled) with ED-Ring
DMC-MEDMale Connectorwith ED-Ring
DMC-NMale Connector(NPT Thread)
DLM-R/MMale Elbow(BSP Tapered/Metric Tapered)
DLUnion Elbow
DURReducing Union
DTUnion Tee
DCUnion Cross
DTRReducing Tee
DBUBulkhead Union
DBUWwelding Bulkhead Union
DBLBulkhead Union Elbow
11
12
13
13
14
15
15
16
17
18.19
18.19
20
21
22
23
23
W
GR
T
K
TR
SV
ESV
WSV
GE-UNF/UNGEO
GE-R
GE-R
GE-M
GE-R-ED
GE-M-ED
GE-NPT
WE-R-M
F
G
H
K
N
L
AP-R
A-R
A-M
A-RWD
A-MWD
A/NPT
B-R-M
W-V
GR-V
T-V
K-V
GS-V
ES-V
WS-V
GE-V..RK
GR-V..R
GR-V..M
GE-V..RWD
GE-V..MWD
GE-V..NPT
WE-V..R..M
119...120...
133...134...
135...136...
137...
141...
138...
182...
103...104...
110...
109...
184...
184...
105...106
115...116...113...114...
P-WV
P-GV
P-TV
P-KV
P-TV
P-GSV
P-ESV
P-WSV
P-GEV..UP-GEV..M-FO.F
P-GEV..RK
P-GEV..R
P-GEV..M
P-GEV..R-WD
P-GEV..M-WD
P-GEV..NPT
P-WEV..RK ..MK
Tube to Tube PAGE EO EMB VOLZ VOSS WALPRO
8 SHINILACE CO., LTD.
Index for DIN 2353SHINILACE CO., LTD.
Index for DIN 2353SHINILACE CO., LTD.
2.4
25 EVW vb EW-V 158... P-EWv-SV
GAI -R -M
AL -R -M
GAIV ..R ..M
114...143...
P-GAV ..R ..M
Tube to Tube Port (Adjustable Fittings) PAGE EO EMB VOLZ VOSS WALPRO
Tube Port To Female Port PAGE EO EMB VOLZ VOSS WALPRO
Tube to Male Thread PAGE EO EMB VOLZ VOSS WALPRO
DBTAAdjustable Branch Teewith Standpipe
DRTAAdjustable Run Teewith Standpipe
DEWSwivel Adjustable Elbowwith Cone
DETSwivel Adjustable Branch Teewith Cone
DELSwivel Adjustable Run Teewith Cone
DA-GED / MEDAdaptor(BSP Paralled/Metric Paralled)with ED-Ring
DEGE-G / MSwivel Adaptor(BSP Paralled/Metric Paralled)with ED-Ring
DKORStandpipe Reducer
DRReducer
DREDSwivel Reducing Adaptorwith cone
DLAAdjustable Elbowwith Standpipe
DFC-G/MFemale Connector(BSP Paralled/Metric Paralled)
25
26
26
27
27
28
29
30
31
32
177...174...
EG-V..RWD ..MWD
EGVD..RWD ..MWD
P-EGES.. R-WD-SV .. M-WD-SV
EGESD.. R-WD .. M..WD
EVT
EVL
EW
ET
EL
KOR
RED
EVGE-R-ED -M-ED
EGE-R-ED -M-ED
VA-Rwd -Mwd
VADKO-Rwd -Mwd
vc
vd
VBDKO
VCDKO
VDDKO
RL. RS
RLDKORSDKO
ET-V
EL-V
EWVD
ETVD
ELVD
KOR-V
REDV
160...
162...
148...78
P-ETV-SV
P-ELV-SV
P-EWVD
P-ETVD
P-ELVD
P-REDV-SV
P-REDVD
SHINILACE CO., LTD. 9
DUESwivel Unionwith Cone
DSWVE-G / MBanjo Fittings(BSP Paralled / Metric Paralled)with DKA-Ring
35
36
157...155...
P-RSWV ..R ..M
P-RSTV ..R ..V
37
Tube Port to Tube Port
33
PAGE EO
EDKO
EMB
EDKV
VOLZ VOSS
SNV
WALPRO
Banjo Fittings
34
PAGE
SWVE-R -M
EO
SBD-R -M
EMB VOLZ
152.../153...150.../151...
VOSS WALPRO
Gauge Connector & Test Couplings PAGE
142...
VOSS
DWH-G / MHigh Pressure Banjo Fittings(BSP Paralled / Metric Paralled)with DKA-Ring
DGC-GPressure Gauge Connector(BSP Paralled)with DKI-Ring
DGE-GSwivel Gauge Adaptor(BSP Paralled)with Cone and DKI-Ring
DGA-GGauge Connector(BSP Paralled)with Standpipe DKI-Ring
DGMATee Test Couplingwith Threaded ConnectionDEMA 3-02G
DEMA3Test Couplingwith Threaded Connection M16
DTH-G / MHigh Pressure Banjo Fittings(BSP Paralled / Metric Paralled)
SBE-R -M
EWHV-...R -...M
ETHV-...R -...M
37
37
38
38
MVA
EO
MAVE
GMA3
EMA3
○
EMB
VODKO
MA-V ...R
VOLZ
MAVD ...R
MAEV ...R
V-MAV... R
WALPRO
EMASD ..
P-EMAS...R -SV
10 SHINILACE CO., LTD.
Index for DIN 2353SHINILACE CO., LTD.
39 AS V GAS-V 139... P-ASV
Weld Fittings PAGE EO EMB VOLZ VOSS WALPRO
DASKWelding Connectorwith DAK
DAKWelding Nipplewith O-Ring
DAKRReducing Welding Nipplewith O-Ring
DASWelding Connector
Spare Parts PAGE EO EMB VOLZ VOSS WALPRO
DSCutting Ring
DNNut
Adaptor PAGE EO EMB VOLZ VOSS WALPRO
MFAEMale Female Adaptor(BSP Paralled)
MFAD-EDMale Female Adaptor(BSP Paralled) with ED-Ring
MFAD-EDMale Female Adaptor(BSP Paralled) with ED-Ring
MFADMale Female Adaptor(BSP Paralled)
Plugs and Caps PAGE EO EMB VOLZ VOSS WALPRO
DVSTIBlanking Plugs with O-Ring(accord.to ISO 6149-3 / DIN 3582)
DVKABlanking Plugwith O-Ring
DCATube Cap
DVSTI-GED / MEDBlanking Plugs for Portwith ED-Ring
39
40
40
42
42
43
43
44 189...
44
45
45
46 M
DPR
m
s
U-M
S-DR
004
007...
P-GAV ..R ..M
S-RP-R46
ASK
SKA
SKAR
VSIT R-ED M-ED
VSCH -Rwd -Mwd
VS-R-WD -M-WD
VSIT M-OR
VSCH..WD
VSTO..OD
EVSV
STO-O
VSCHK
VKA VS...
ROV
ESNO
SNO
SNR
ASKK..OD
SK-A..OD 070... SN
SHINILACE CO., LTD. 11
Index for DIN 2353SHINILACE CO., LTD.
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
Series
Series
Part No.
Part No.
H
H
h
h
L
L
TubeO.D.
TubeO.D.
LLvery lightPN 100
LLvery lightPN 100
LlightPN 315
LlightPN 315
SheavyPN 630
SheavyPN 630
PN 160
PN 160
PN 400
PN 400
PN 315
PN 315
ℓ
ℓ
DU-04LL
DU-04LL
4
4
10
10
9
9
11
9
12
12
14
14
17
17
12
12
14
12
17
14
19
17
24
19
27
24
32
27
41
36
46
41
55
50
14
12
17
14
19
17
22
17
24
19
27
24
32
27
41
36
46
41
55
50
31
21
32
21
35
23
35
24
35
25
39
27
40
29
42
30
43
32
46
36
48
40
52
44
54
47
63
56
66
63
45
31
47
32
49
34
51
38
57
40
57
43
66
48
74
54
80
62
90
72
12
11
9
9.5
12
11.5
12
12.5
11
13
10
12
11
14
13
15
14
17
16
21
16
23.5
20
27.5
21
30.5
20
34.5
21
40
16
16
18
17
17
17.5
19
21.5
22
22
21
24.5
23
26.5
26
30
27
35.5
29
41
12
12
14
14
17
17
19
19
14
14
17
17
19
19
22
22
27
27
32
32
36
36
41
41
50
50
60
60
17
17
19
19
22
22
24
24
27
27
30
30
36
36
46
46
50
50
60
60
6
6
8
8
10
10
12
12
6
6
8
8
10
10
12
12
15
15
18
18
22
22
28
28
35
35
42
42
6
6
8
8
10
10
12
12
14
14
16
16
20
20
25
25
30
30
38
38
DU-06LL
DU-06LL
DU-08LL
DU-08LL
DU-10LL
DU-10LL
DU-12LL
DU-12LL
DU-06L
DU-06L
DU-08L
DU-08L
DU-10L
DU-10L
DU-12L
DU-12L
DU-15L
DU-15L
DU-18L
DU-18L
DU-22L
DU-22L
DU-28L
DU-28L
DU-35L
DU-35L
DU-42L
DU-42L
DU-06S
DU-06S
DU-08S
DU-08S
DU-10S
DU-10S
DU-12S
DU-12S
DU-14S
DU-14S
DU-16S
DU-16S
DU-20S
DU-20S
DU-25S
DU-25S
DU-30S
DU-30S
DU-38S
DU-38S
DUStraight Union
DLUnion Elbow
12 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Series Part No. TubeD1
O.D.D2
LlightPN 315
SheavyPN 630
PN 160
PN 400
PN 315
h
14171719191924242727273232324141464617191922222224
L
40414142424345454646484850505254595947484850505154
ℓ
111212131314151515.515.516.517.518.518192121211817.517.519.519.51920.5
H1
17191922222227273232323636364141505019222224242427
H2
14141714171919221922272227323236364117171917192222
810101212121515181818222222282835
14 12 27 24 24 54 20.5
35
16 12 30 24 27 54 20
8
16 14 30 27 27 57 21.5
10
20 10 36 22 32 60 22
10
20 12 36 24 32 60 22
12
20 16 36 30 32 63 23
12
25 16 46 30 41 68 25
12
25 20 46 36 41 71 25.5
30 25 50 46 46 77 26.5
14
30 20 50 36 46 74 26
38 30 60 50 55 87 29.5
66868
1010121012151215181822222866868
1010
DUR 08L-06LDUR 10L-06LDUR 10L-08LDUR 12L-06LDUR 12L-08LDUR 12L-10LDUR 15L-10LDUR 15L-12LDUR 18L-10LDUR 18L-12LDUR 18L-15LDUR 22L-12LDUR 22L-15LDUR 22L-18LDUR 28L-18LDUR 28L-22LDUR 35L-22LDUR 35L-28LDUR 08S-06SDUR 10S-06SDUR 10S-08SDUR 12S-06SDUR 12S-08SDUR 12S-10SDUR 14S-10SDUR 14S-12SDUR 16S-12SDUR 16S-14SDUR 20S-10SDUR 20S-12SDUR 20S-16SDUR 25S-16SDUR 25S-20SDUR 30S-20SDUR 30S-25SDUR 38S-30S
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
DURReducing Union
SHINILACE CO., LTD. 13
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DTUnion Tee
DCUnion Cross
Dimensions given approximate length with tightened nut. All dimensions are in millimeters, for reference only subject to change.
H h LTubeO.D.
Series
LLvery lightPN 100
LlightPN 315
SheavyPN 630
PN 160
PN 400
PN 315
ℓ
4 10 99
1214141212141719242736415012141717192427364150
21212324272729303236404447566331323438404348546272
119.5
11.512.5
23.527.530.5
17.5
24.5
34.5
21.5
26.5
35.5
151214151721
401617
22
30
41
121417191417192227323641506017192224273036465060
68
101268
101215182228354268
1012141620253038
Part No.
DT-04LLDT-06LLDT-08LLDT-10LLDT-12LLDT-06LDT-08LDT-10LDT-12LDT-15LDT-18LDT-22LDT-28LDT-35LDT-42LDT-06SDT-08SDT-10SDT-12SDT-14SDT-16SDT-20SDT-25SDT-30SDT-38S
H h LTubeO.D.
Series
LLvery lightPN 100
LlightPN 315
SheavyPN 630
PN 160
PN 400
PN 315
ℓ
4 10 99
1214141212141719242736415012141717192427364150
21212324272729303236404447566331323438404348546272
119.5
11.512.5
23.527.530.5
17.5
24.5
34.5
21.5
26.5
35.5
151214151721
401617
22
30
41
121417191417192227323641506017192224273036465060
68
101268
101215182228354268
10121416202530
38
Part No.
DC-04LLDC-06LLDC-08LLDC-10LLDC-12LLDC-06LDC-08LDC-10LDC-12LDC-15LDC-18LDC-22LDC-28LDC-35LDC-42LDC-06SDC-08SDC-10SDC-12SDC-14SDC-16SDC-20SDC-25SDC-30SDC-38S
14 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DTRReducing Tee
Series
L LightPN 316
SPN 630
PN 315
PN 315
PN 315
PN 315
PN 160
PN 160
PN 400
PN 400
PN 400
PN 400
Tube O.D.D1 D2 D3
6868
1010108
121212121212101215
18
15
18
15
22
15
22
15
22
12
22
18
22
18
22
28
18
22
28
H1
14171417191919172222222222221922272727272722323232323236363636
3636
4136
41
H2
14171417191914172217221922191922272722272222193232321936362736
3236
4132
41
H3
17141919141719221417171919222727141922222732191922273219222727
3232
1936
22
h
14141414141414171717171717171919191919191924242424242427272727
2727
3627
36
L1
29293030303030323232323232323636363636363639404040404044444444
4444
4744
47
L2
29293030303030323232323232323636363636363639394040403944444344
4444
4444
47
L3
29293030303030323232323232323636363636363640393939394043434343
4444
4644
46
ℓ2
141415151515151717171717171721212121212121242423.523.523.52427.527.52827.5
27.527.5
30.527.5
30.5
ℓ3
14141515151515171717171717172121212121212123.52424242423.528282828
27.527.5
3127.5
31
ℓ1
1414151515151517171717171717212121212121212423.523.523.523.523.527.527.527.527.5
27.527.5
30.527.5
30.5
181022221522
1822
2818
28
6868
101068
128
121012101012151512151212101818
151810121515
1818
1022
12
86
101068
1012688
10101215156
1012121518101012
Part No.
DTR 06L-06L-08LDTR 08L-08L-06LDTR 06L-06L-10LDTR 08L-08L-10LDTR 10L-10L-06LDTR 10L-10L-08LDTR 10L-06L-10LDTR 08L-08L-12LDTR 12L-12L-06LDTR 12L-08L-08LDTR 12L-12L-08LDTR 12L-10L-10LDTR 12L-12L-10LDTR 12L-10L-12LDTR 10L-10L-15LDTR 12L-12L-15LDTR 15L-15L-06LDTR 15L-15L-10LDTR 15L-15L-12LDTR 15L-15L-12LDTR 15L-12L-15LDTR 12L-12L-18LDTR 18L-10L-10LDTR 18L-18L-10LDTR 18L-18L-12LDTR 18L-18L-15LDTR 18L-10L-18LDTR 22L-22L-10LDTR 22L-22L-12LDTR 22L-15L-15LDTR 22L-22L-15LDTR 22L-18L-18LDTR 22L-22L-18LDTR 22L-18L-22LDTR 28L-28L-10LDTR 28L-28L-12L
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
282828281012121212161616161620202020252525
414141412224242424303030303036363636464646
414136412219242424303030303036363636464646
273236361719192230171922243622243046303650
363636361717171724242424242727272736363641
474747473438383842434343434748484853545461
474747473437383842434343434748484853545461
464747473337373843414142424846464754525362
30.530.530.530.517.52221.521.525.524.524.524.524.528.526.526.526.531.5303037
3130.530.530.518222221.524.5262625.525.526.529.529.528.53033.531.535.5
30.530.530.530.517.521.521.521.525.524.524.524.524.528.526.526.526.531.5303037
28282228108
121212161616161620202020252525
15182222688
101668
10122010121625162030
DTR 28L-28L-15LDTR 28L-28L-18LDTR 28L-22L-22LDTR 28L-28L-22LDTR 10S-10S-06SDTR 12S-08S-08SDTR 12S-12S-08SDTR 12S-12S-10SDTR 12S-12S-16SDTR 16S-16S-06SDTR 16S-16S-08SDTR 16S-16S-10SDTR 16S-16S-12SDTR 16S-16S-20SDTR 20S-20S-10SDTR 20S-20S-12SDTR 20S-20S-16SDTR 20S-20S-25SDTR 25S-25S-16SDTR 25S-25S-20SDTR 25S-25S-30S
SHINILACE CO., LTD. 15
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DBUBulkhead Union
DBUWWelding Bulkhead Union
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
Series
LlightPN 315
SheavyPN 630
PN 315
PN 400
PN 315
D
1417192227323641506017192224273036465060
L
85858787
10010110510611411589899191
107107114120126133
ℓ
5656585870697373717060605959
7273
727171
72
H
1820222528323640506020222528303538455060
Tube O.D.
68
101215182228354268
1012141620253038
Part No.
DBUW-06LDBUW-08LDBUW-10LDBUW-12LDBUW-15LDBUW-18LDBUW-22LDBUW-28LDBUW-35LDBUW-42LDBUW-06SDBUW-08SDBUW-10SDBUW-12SDBUW-14SDBUW-16SDBUW-20SDBUW-25SDBUW-30SDBUW-38S
Series
LlightPN 315
S
PN 160
PN 400
PN
H1
1719222430364146556519222427303241465065
h
1719222427323641506019222427303241465065
L
4242434446495152585944444647505055596468
L1
2223252527303335404227283131353539444853
ℓ
272728293132.534.535.536.536292929.530.5
3537.5
3231.533.5
37
ℓ1
78
10101213.516.518.518.519121314.514.5
2021.5
1716.517.5
22
H
1417192227323641506017192224273036465060
Tube O.D.
68
101215182228354268
1012141620253038
Part No.
DBU-06LDBU-08LDBU-10LDBU-12LDBU-15LDBU-18LDBU-22LDBU-28LDBU-35LDBU-42LDBU-06SDBU-08SDBU-10SDBU-12SDBU-14SDBU-06SDBU-20SDBU-25SDBU-30SDBU-38S
T
M 12 × 1.5M 14 × 1.5M 16 × 1.5M 18 × 1.5M 22 × 1.5M 26 × 1.5M 30 × 2M 36 × 2M 45 × 2M 52 × 2M 14 × 1.5M 16 × 1.5M 18 × 1.5M 20 × 1.5M 22 × 1.5M 24 × 1.5M 30 × 2M 36 × 2M 42 × 2M 52 × 2
16 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DBLBulkhead Union Elbow
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
Series
LlightPN 315
SPN 630
PN 160
PN 400heavy
PN 315
H1
1719222430364146556519222427303241465065
h
1212141719242736415012141717192427364150
L
2729303236404447566331323438404348546272
L1
4242434446495152585944444647505055596468
L2
1417182023243034394317182021232430343943
ℓ
121415172123.527.530.534.540161717.521.5
3035.5
2224.526.5
41
ℓ1
272728293132.534.535.536.536292929.530.5
3537.5
3231.533.5
37
H
1417192227323641506017192224273036465060
Tube O.D.
68
101215182228354268
1012141620253038
Part No.
DBL-06LDBL-08LDBL-10LDBL-12LDBL-15LDBL-18LDBL-22LDBL-28LDBL-35LDBL-42LDBL-06SDBL-08SDBL-10SDBL-12SDBL-14SDBL-06SDBL-20SDBL-25SDBL-30SDBL-38S
T
M 12 × 1.5M 14 × 1.5M 16 × 1.5M 18 × 1.5M 22 × 1.5M 26 × 1.5M 30 × 2M 36 × 2M 45 × 2M 52 × 2M 14 × 1.5M 16 × 1.5M 18 × 1.5M 20 × 1.5M 22 × 1.5M 24 × 1.5M 30 × 2M 36 × 2M 42 × 2M 52 × 2
SHINILACE CO., LTD. 17
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DOM-U/MMale Connector(Unified and Metric Paralled)with *O-Ring
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
for Metric Paralled
for Unified
3
Series
LlightPN 315
SheavyPN 630
PN 160
PN 400
PN 315
Part No.
DOM 08L-04UDOM 10L-04UDOM 12L-06UDOM 12L-08UDOM 12L-10UDOM 15L-08UDOM 15L-10UDOM 18L-08UDOM 18L-10UDOM 22L-10UDOM 22L-12UDOM 22L-16UDOM 28L-12UDOM 28L-16U
DOM 42L-20UDOM 08S-04UDOM 10S-06UDOM 12S-06U
TU(Unified)
7/16-20 UNF-2A7/16-20 UNF-2A9/16-18 UNF-2A
3/4-16 UNF-2A7/8-14 UNF-2A3/4-16 UNF-2A7/8-14 UNF-2A3/4-16 UNF-2A7/8-14 UNF-2A7/8-14 UNF-2A
1 1/16-12 UN-2A
3/4-16 UNF-2A
1 5/16-12 UN-2A
3/4-16 UNF-2A
1 1/16-12 UN-2A
7/8-14 UNF-2A
1 5/16-20 UN-2A
3/4-16 UNF-2A7/8-14 UNF-2A
1 1/16-12 UN-2A
1 5/8-12 UN-2A
1 1/16-12 UN-2A
7/16-20 UNF-2A
1 5/16-12 UN-2A
9/16-18 UNF-2A
1 5/16-12 UN-2A
9/16-18 UNF-2A
1 5/8-12 UN-2A1 5/8-12 UN-2A
DOM 12S-08UDOM 16S-08UDOM 16S-10UDOM 20S-08UDOM 20S-10UDOM 20S-12U
DOM 30S-16U
DOM 25S-12U
DOM 30S-20U
DOM 25S-16U
DOM 38S-20U
h
1717192427242727273232414141
5517192224242732
41
32
46
32
50
36
55
K
14.414.417.622.325.522.325.522.325.525.531.938.231.938.2
47.71617.617.622.322.325.522.3
38.2
25.5
38.2
31.9
47.7
31.9
47.7
L
2526262829293031313333343434
4230313134343742
47
42
50
42
50
47
57
ℓ1
910101112.71112.71112.712.715151515
910
15
1011
12.7
15
15
15
1112.711
1515
15
ℓ
1011111314.31415.314.514.816.816.517.517.517.5
1514.5
19
14.517.5
20.8
23.5
20.5
23.5
15.518.820.5
2323
26
H
1719222222272732323636364141
6019222424303036
46
36
50
36
50
46
60
Tube O.D.
810121212151518182222222828
428
101212161620
25
20
30
20
30
25
38
Series
LlightPN 315
PN 160
Part No.
DOM 06L-M10DOM 08L-M12DOM 10L-M14DOM 12L-M16DOM 15L-M18DOM 18L-M22DOM 22L-M27DOM 28L-M33DOM 35L-M42DOM 06S-M12DOM 08S-M14DOM 10S-M16DOM 12S-M18DOM 16S-M22DOM 20S-M27DOM 25S-M33DOM 30S-M42
TM(Metric)
M 10 × 1M 12 × 1.5M 14 × 1.5M 16 × 1.5M 18 × 1.5M 22 × 1.5M 27 × 2M 33 × 2M 42 × 2M 12 × 1.5M 14 × 1.5M 16 × 1.5M 18 × 1.5M 22 × 1.5M 27 × 2M 33 × 2M 42 × 2
h
1417192224273241501719222427324150
K
1417192224273241501719222427324150
L
2325262729303334392830313337424750
ℓ1
9.5111112.5141518.518.519111112.5141518.518.519
ℓ
8.5101112.513.514.516.517.517.51315151718.520.52323.5
H
1417192227323641501719222430364650
68
1012151822283568
101216202530
SheavyPN 630
PN 400
DOM 35L-16UDOM 35L-20U
1 5/16-20 UN-2A1 5/8-12 UN-2A
4650
38.247.7
3939
1515
17.517.5
5050
3535
18 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DMC-R
DMC-G
Male Connector(BSP) Tapered
Male Connector(BSP) Paralled
Series
LLvery lightPN 100
LlightPN 315
Part No.
DMC 04LL-01RDMC 06LL-01RDMC 08LL-01RDMC 08LL-02RDMC 10LL-02RDMC 12LL-02RDMC 12LL-03RDMC 06L-01GDMC 06L-01RDMC 06L-02GDMC 06L-03GDMC 06L-04GDMC 08L-02GDMC 08L-01G
DMC 08L-04GDMC 10L-02GDMC 10L-02RDMC 10L-03GDMC 10L-04GDMC 12L-03GDMC 12L-02GDMC 12L-02RDMC 12L-03RDMC 12L-04G
DMC 15L-04R
DMC 15L-04G
DMC 18L-03G
DMC 12L-04R
DMC 15L-06G
DMC 15L-03G
DMC 18L-04R
DMC 12L-06G
DMC 18L-04G
DMC 15L-03R
DMC 18L-06G
h
1111121414171714121922271914
2719172227221919
32
27
19
27
27
27
24
24
27
24
32
24
32
K
-------
14-
1822261814
2618-
22262218-
32
26
-
26
22
26
-
22
-
-
32
-
32
L
2626283232323223302526272523
2726362728272737
29
31
37
29
29.5
28
40
29
41
39
30
38
30
ℓ
1614.516.520.520.520208.5151011.512108.5
1121
12
12.513
22
14
14
13
25
13.5
25.5
12.51222
14
14.5
24
15
23
14.5
ℓ1
888
1212121288
121214128
1212
14
1214
12
14
12
14
14
12
14
121212
16
14
14
16
12
16
H
1012141417191914141414141717
171919191922 2222
22
32
22
27
32
22
27
27
32
22
27
27
32
Tube O.D.
4688
1012126666688
810101010121212
12
18
12
15
18
12
15
15
18
12
15
15
18
DMC 08L-02RDMC 08L-03G
TR(PT), G(PF)
PT 1/8PT 1/8PT 1/8PT 1/4PT 1/4PT 1/4PT 3/8PF 1/8PT 1/8PF 1/4PF 3/8
PF 1/2
PF 1/2
PF 3/8
PF 1/4
PF 1/4
PF 1/8
PT 1/4PT 3/8PF 1/2
PT 1/2
PF 1/2
PT 1/2
PF 3/4
PF 1/4
PF 3/4
PF 1/2
PT 1/4
PF 1/2
PF 3/8
PF 3/8
PF 3/8
PT 1/2
PT 3/8
PF 3/4
PT 1/4PF 3/8
1722
-22
3526
2011.5
1212
1717
88
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
SHINILACE CO., LTD. 19
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DMC-R
DMC-G
Male Connector(BSP Tapered)
Male Connector(BSP Paralled)
Series
LlightPN 160
Part No.
DMC 22L-06GDMC 22L-04GDMC 22L-06RDMC 28L-08GDMC 28L-06GDMC 35L-10GDMC 35L-08GDMC 42L-12GDMC 06S-02GDMC 06S-04GDMC 08S-02GDMC 08S-03GDMC 10S-03GDMC 10S-02G
DMC 12S-02GDMC 12S-04GDMC 14S-04GDMC 14S-03G
TR(PT), G(PF)
DMC 16S-04GDMC 16S-03GDMC 16S-06GDMC 20S-06GDMC 20S-04GDMC 25S-08G
DMC 30S-08G
DMC 25S-06G
DMC 38S-12G
DMC 30S-10G
DMC 38S-10G
h
3232324141504655192719222219
2227272427273232
50
32
46
41
55
41
55
K
3226-
3932493955182618222218
1826262226223232
49
26
39
39
55
32
49
L
3333463434393942283330303131
3334373637363942
50
42
50
47
57
47
57
ℓ
16.516.529.517.517.517.517.51913181515.51514.5
17.519
16.5
18.518.5
20.5
23.5
23
26
1820.520.5
23.523
26
ℓ1
1614161816201822121412121212
1414
12
1214
14
18
18
22
121616
2016
20
H
3636364141505060171719192222
2424272730303036
50
36
50
46
60
46
60
Tube O.D.
22222228283535426688
1010
1212141416161620
30
20
30
25
38
25
38
DMC 10S-04GDMC 12S-03G
PF 3/4PF 1/2PT 3/4PF 1PF 3/4PF 1 1/4PF 1PF 1 1/2PF 1/4PF 1/2PF 1/4
PF 1/2
PF 3/8
PF 3/8
PF 3/8
PF 3/4
PF 1/4
PF 3/4PF 1/2PF 1
PF 1/4
PF 3/4
PF 1/2
PF 11/4
PF 1/2
PF 1
PF 3/8
PF 1 1/2PF 1 1/4
PF 1/2PF 3/8
2722
2622
3433
17.517
1412
2224
1012
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
SheavyPB 630
PB 400
PB 250
20 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DMC-MMale Connector (Metric Paralled)
Series
LLvery lightPN 100
LlightPN 315
Part No.
DMC 04LL-M06KDMC 04LL-M08KDMC 06LL-M10KDMC 08LL-M10KDMC 06L-M10DMC 08L-M12DMC 08L-M18DMC 10L-M14DMC 10L-M16DMC 10L-M18DMC 10L-M22DMC 12L-M14DMC 12L-M16DMC 12L-M18
DMC 15L-M18DMC 15L-M22DMC 18L-M18DMC 18L-M22
TM(Metric)
DMC 22L-M22DMC 22L-M26DMC 28L-M23DMC 35L-M42DMC 42L-M48DMC 06S-M12
DMC 16S-M18
DMC 12S-M18
DMC 25S-M33
DMC 08S-M14
DMC 16S-M22
DMC 12S-M22
DMC 30S-M42
DMC 10S-M16
DMC 20S-M27
DMC 14S-M20
DMC 38S-M48
h
910111214172419222427192224
2427272732324150
22
32
55
24
41
17
27
27
50
19
27
27
55
K
----
14172319212327192123
2327232727313949
21
32
55
23
39
17
23
27
49
19
27
25
55
L
2626262823252626272729262727
2930303133333439
31
42
42
33
47
28
36
34
50
30
37
37
57
ℓ
161614.516.58.5
1011.5111212.5141112.512.5
1514
13.5
14.516.5
19
17
23
13
18
17.5
23.5
16.517.517.5
15
20.5
15
18.5
19
26
ℓ1
88888
121212121214121212
1412
12
1414
22
12
18
12
12
14
20
161820
12
16
12
14
14
22
H
1010121414171719191919222222
272732323636 4150
22
36
60
24
46
17
30
24
50
19
30
27
60
Tube O.D.
4468688
10101010121212
1515181822222835
10
20
42
12
25
6
16
12
30
8
16
14
38
DMC 12L-M22DMC 15L-M16
M 6×1KegM 8×1KegM 10×1KegM 10×1KegM 10×1M 12×1.5M 18×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5
M 22×1.5
M 14×1.5
M 26×1.5
M 16×1.5
M 33×2
M 18×1.5
M 42×2M 48×2M 12×1.5
M 18×1.5
M 18×1.5
M 14×1.5
M 22×1.5
M 22×1.5
M 16×1.5
M 27×2
M 18×1.5
M 18×1.5
M 33×2
M 22×1.5
M 22×1.5
M 42×2
M 20×1.5
M 48×2
M 22×1.5M 16×1.5
2724
2721
2928
1413
1412
2227
1215
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
SheavyPB 630
PB 400
PN 160
PB 250
SHINILACE CO., LTD. 21
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DMC-GEDMale Connector (BSP Paralled) with *ED-Ring
3
Series
LlightPN 315
Part No.
DMC 06L-01GEDDMC 06L-02GEDDMC 08L-01GEDDMC 08L-02GED
TG(PF)
DMC 08L-03GEDDMC 10L-02GEDDMC 10L-03GEDDMC 10L-04GEDDMC 12L-02GEDDMC 12L-03GEDDMC 12L-04GEDDMC 15L-03GEDDMC 15L-04GEDDMC 18L-04GEDDMC 18L-06GED
DMC 28L-08GEDDMC 35L-10GEDDMC 42L-12GEDDMC 06S-02GEDDMC 08S-02GEDDMC 08S-03GEDDMC 10S-02GEDDMC 10S-03GEDDMC 10S-04GEDDMC 12S-02GED
DMC 16S-06GED
DMC 14S-04GED
DMC 25S-06GED
DMC 12S-03GED
DMC 20S-06GED
DMC 16S-03GED
DMC 25S-08GED
DMC 38S-12GED
DMC 12S-04GED
DMC 25S-04GED
DMC 16S-04GED
DMC 30S-10GED
DMC 22L-06GED
1/81/41/81/43/81/43/81/21/43/81/2
1/4
3/8
3/8
1/2
1/4
1/2
3/81/21/4
3/4
1
3/8
3/4
1 1/4
1/2
1/2
1 1/2
1/2
3/4
1/4
3/8
1
1 1/2
1/2
1 1/4
3/43/4
h
1419141922192227192227242727
4150551919221922
27
41
27
27
41
22
32
27
41
55
22
32
27
50
K
1419141922192227192227222727
4050551919221922
32
27
27
27
32
19
27
22
40
55
22
32
27
50
L
2325242526262728272728292931
3439422830303131
34
47
34
37
47
33
39
36
47
57
33
42
37
50
ℓ
8.510
9.51011.51112.5131212.51313.51414.5
17.519
17.5
1315
17.5
19
23
16.5
20.5
18
23
26
15.514.515
17.5
23
17
20.5
18.5
23.5
ℓ1
8128
1212121214121214121414
2022
18
1212
14
14
16
12
16
12
18
22
121212
14
14
12
16
14
20
H
1414171717191919222222272732
4150601719192222
24
46
22
27
46
24
30
30
46
60
24
36
30
50
Tube O.D.
66888
101010121212151518
283542688
1010
12
25
10
14
25
12
16
16
25
38
12
20
16
30
3232
3232
3133
14.516.5
1616
3236
1822
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
SheavyPN 630
PN 400
PN 160
PN 315
22 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DMC-MEDMale Connector with *ED-Ring
3
Series
LlightPN 315
Part No.
DMC 06L-M10EDDMC 08L-M12EDDMC 10L-M14EDDMC 12L-M16ED
TM(Metric)
DMC 12L-M18EDDMC 12L-M22EDDMC 15L-M18EDDMC 15L-M22EDDMC 18L-M22EDDMC 22L-M26EDDMC 28L-M33EDDMC 35L-M42EDDMC 42L-M48EDDMC 06S-M12EDDMC 08S-M14ED
DMC 12S-M18EDDMC 14S-M20EDDMC 16S-M22EDDMC 20S-M27EDDMC 25S-M33EDDMC 30S-M42EDDMC 38S-M48ED
DMC 10S-M16ED
M 10×1M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 18×1.5M 22×1.5M 22×1.5M 26×1.5M 33×2
M 33×2
M 42×2
M 42×2
M 48×2
M 48×2
M 12×1.5
M 18×1.5M 20×1.5M 22×1.5M 27×2
M 14×1.5M 16×1.5
h
1417192224272427273241505517
24272732415055
K
1417192224272427273240505517
24262732405055
L
2325262727292930313334394228
33373742475057
ℓ
8.5101112.512.51413.51514.516.517.517.51913
1918.5
17
20.52323.526
ℓ1
812121212141214141618202212
1414
12
16182022
H
1417192222222727323641506017
24273036465060
Tube O.D.
68
10121212151518222835426
12141620253038
1922
1922
3031
1515
1212
1922
810
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
SheavyPN 630
PN 400
PN 160
PN 315
SHINILACE CO., LTD. 23
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DMC-NMale Connector (NPT Thread)
DLM-R/MMale Elbow (BSP Tapered/Metric Tapered)
Series
LlightPN 315
Part No.
DMC 04LL-01NDMC 06LL-01NDMC 08LL-01NDMC 06L-01NDMC 06L-02NDMC 08L-02NDMC 10L-02NDMC 10L-03NDMC 12L-02NDMC 12L-03NDMC 12L-04NDMC 15L-04NDMC 18L-04NDMC 22L-06N
DMC 42L-12NDMC 06S-02NDMC 08S-02NDMC 10S-02NDMC 10S-03NDMC 12S-02NDMC 12S-03NDMC 12S-04NDMC 14S-04NDMC 16S-04N
DMC 30S-10N
DMC 20S-06N
DMC 38S-12N
DMC 25S-08N
DMC 28L-08NDMC 35L-10N
TN(NPT)
11/2 - 11.5
1/8 - 271/8 - 271/8 - 271/8 - 271/4 - 181/4 - 181/4 - 183/8 - 181/4 - 183/8 - 181/2 - 14
3/8 - 18
1/2 - 14
1/4 - 18
1/2 - 14
3/8 - 18
3/4 - 14
1/2 - 181/2 - 141/2 - 143/4 - 14
1/4 - 181/4 - 181/4 - 18
1 1/4 - 11.51 1/4 - 11.5
1 - 11.5
1 - 11.5
11/4 - 11.5
h
1111121217171719191922242732
5517171919222222
41
24
46
27
55
32
4146
L
2828303238383940404045464850
6543434444464651
69
54
73
54
80
59
5662
ℓ
18.516.518.517232324252525303131.533.5
42282827.527.529.529.534.5
45
36
46.5
35.5
49
37.5
39.540.5
ℓ1
9.99.99.99.9
14.214.214.214.214.214.219.119.119.119.1
14.214.2
25.4
14.214.2
19.1
23.9
19.1
25.4
14.214.219.1
23.919.1
23.923.9
H
1012141414171919222222273236
6017192222242424
46
27
50
30
60
36
4150
Tube O.D.
468668
1010121212151822
4268
1010121212
25
14
30
16
38
20
2835
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
SheavyPN 630
PN 400
PN 315
PN 160
LLvery lightPN 100
Series
LLverylightPN 100
LlightPN 315
Part No.
DLM 04LL-01R DLM 04LL-M 8K
DLM 06LL-M 10K
DLM 08LL-M 10K
DLM 08L-02R
DLM 06LL-01R
DLM 10LL-02R
DLM 08LL-01R
DLM 12LL-03R
DLM 10LL-02R -
DLM 15LL-04R
DLM 12LL-02R -
4 10 9 21 17 11
8 17 12 29 26 14
8 19 14 32 27 17
8 14 12 23 20 11.5
12 22 17 32 28 17
12 24 17 38 28 21.5
12 19 17 25 23 13
18 32 24 40 36 23.5
16 30 24 43 32 24.5
6 12 9 21 17 9.5
10 19 14 30 27 15
10 22 17 34 28 17.5
10 17 14 24 23 12.5
8
8
17
14
8
12
12
17
8
12
12
-
14
12
-
14
12
1/8
1/8
1/2
1/2
1/8
1/4
1/4
1/2
1/8
1/4
1/4
1/4
3/8
3/8
1/4
1/2
3/8
10
10
19
19
10
14
14
19
10
14
14
14
15
15
14
19
15
15 27 19 36 34 21
14 27 19 40 32 22
6 14 12 27 20 12
6 17 12 31 26 16
DLM 18LL-04R
DLM 06L-01R DLM 06L-M10KDLM 08L-M12K
DLM 10L-M14K
DLM 12L-M16K
DLM 15L-M18K
DLM 18L-M22K
DLM 18S-M12K
DLM 08S-M14K
DLM 10S-M16K
DLM 12S-M18K
DLM 14S-M20K
DLM 16S-M22K
DLM 06S-02R
DLM 08S-02R
DLM 10S-03R
DLM 12S-03R
DLM 14S-04R
DLM 16S-04R
M 8×1 Keg
M 10×1 KegM 12×1.5KegM 14×1.5KegM 16×1.5KegM 18×1.5KegM 22×1.5KegM 12×1.5KegM 14×1.5KegM 16×1.5KegM 18×1.5KegM 20×1.5KegM 22×1.5Keg
M 10×1 KegM 10×1 Keg
--
TR(PT)ℓ1 ℓ1ℓh L L1H
SheavyPN 400
TMetric Taper
Tube O.D.
24 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DFC-G/MFemale Connector (BSP Paralled/Metric Paralled)
Series
Series
LlightPB 315
LlightPN 315
Part No.
Part No.
DFC 06L-M10
DFC 06L-01G
DFC 08L-M12
DFC 08L-02G
DFC 10L-M14
DFC 08L-03G
DFC 12L-M16
DFC 08L-04G
TM(Metric)
TG(GP)
DFC 15L-M18DFC 18L-M22DFC 22L-M26DFC 28L-M33DFC 35L-M42DFC 42L-M48DFC 06S-M12DFC 08S-M14DFC 10S-M16DFC 12S-M18DFC 14S-M20
DFC 10L-02GDFC 10L-03GDFC 10L-04GDFC 12L-03GDFC 12L-04GDFC 15L-04GDFC 18L-04GDFC 22L-06GDFC 28L-08GDFC 35L-10GDFC 42L-12G
DFC 20S-M27
DFC 08S-02G
DFC 20S-06G
DFC 25S-M33
DFC 10S-03G
DFC 25S-08G
DFC 30S-M42
DFC 12S-03G
DFC 30S-10G
DFC 38S-M48
DFC 14S-04G
DFC 38S-12G
DFC 16S-M22
DFC 06S-02G
DFC 16S-04G
M 10×1
1/8
M 12×1.5
1/4
M 14×1.5
3/8
M 16×1.5
1/2
M 18×1.5
1/4
M 22×1.5
3/8
M 26×1.5
1/2
M 33×2
3/8
M 42×2
1/2
M 48×2
1/2
M 12×1.5
1/2
M 14×1.5
3/4
M 16×1.5
1
M 18×1.5
1 1/4
M 27×2
1/4
3/4
M 33×2
3/8
1
M 42×2
3/8
1 1/4
M 48×2
1/2
1 1/2
M 20×1.5
1 1/2
M 22×1.5
1/4
1/2
TubeO.D.
TubeO.D.
6
6
8
8
10
8
12
8
15
10
18
10
22
10
28
12
35
12
42
15
6
18
8
22
10
28
12
35
20
8
20
25
10
25
30
12
30
38
14
38
d
468
101215192430364578
16202532
1012
d
4666888
10101215192430
5
16
7
20
8
25
10
32
364
12
h
1417192224303241556017172224
36415560
2730
h
1417171719191922222732364150
19
36
22
41
24
55
27
60
6017
30
H
1417192227323641506017192224
36465060
2730
H
1417192227323641506017192224
36
36
46
46
50
50
60
60
2730
30
L
3439404143465154626541414344
56616874
4949
L
3439404440414541454647525563
41
56
43
62
43
69
50
74
6541
50
ℓ1
12.517171717192124262817171717
2426
22
28
1919
ℓ1
12171720171720172020202224.526.5
17
24.5
17
26.5
17
22
20
28.5
28.517
20
ℓ
19.52425262829.534.537.540.542262626.527.5
3741.5
34.5
43
3130.5
ℓ
1924252925263026303130.535.53841
26.5
37.5
26.5
42
26
34.5
32
43.5
42.526
31.5
14
42
16
6
16
SheavyPB 630
SheavyPB 630
PB 400
PB 400
PB 160
PB 160
PB 315
PB 315
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
for Metric Paralled
for BSP Paralled
SHINILACE CO., LTD. 25
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DLAAdjustable Elbow with Standpipe
DBTAAdjustable Branch Tee with Standpipe
3
Series
Series
LlightPN 315
LlightPN 315
Part No.
Part No.
DLA-06L
DBTA-06L
DLA-08L
DBTA-08L
DLA-10L
DBTA-10L
DLA-12L
DBTA-12L
T
T
DLA-15LDLA-18LDLA-22LDLA-28LDLA-35LDLA-42LDLA-06SDLA-08SDLA-10SDLA-12SDLA-14S
DBTA-15LDBTA-18LDBTA-22LDBTA-28LDBTA-35LDBTA-42LDBTA-06SDBTA-08SDBTA-10SDBTA-12SDBTA-14S
DLA-20S
DBTA-20S
DLA-25S
DBTA-25S
DLA-30S
DBTA-30S
DLA-38S
DBTA-38S
DLA-16S
DBTA-16S
M 12×1.5
M 12×1.5
M 14×1.5
M 14×1.5
M 16×1.5
M 16×1.5
M 18×1.5
M 18×1.5
M 22×1.5
M 22×1.5
M 26×1.5
M 26×1.5
M 30×2
M 30×2
M 36×2
M 36×2
M 45×2
M 45×2
M 52×2
M 52×2
M 14×1.5
M 14×1.5
M 16×1.5
M 16×1.5
M 18×1.5
M 18×1.5
M 20×1.5
M 20×1.5
M 30×2
M 30×2
M 36×2
M 36×2
M 42×2
M 42×2
M 52×2
M 52×2
M 22×1.5
M 22×1.5
M 24×1.5
M 24×1.5
H
H
14
14
17
17
19
19
22
22
27
27
32
32
36
36
41
41
50
50
60
60
17
17
19
19
22
22
24
24
36
36
46
46
50
50
60
60
h
h
12
12
12
12
14
14
17
17
19
19
24
24
27
27
36
36
41
41
50
50
12
12
14
14
17
17
17
17
27
27
36
36
41
41
50
50
L
L
27
27
29
29
30
30
32
32
36
36
40
40
44
44
47
47
56
56
63
63
31
31
32
32
34
34
38
38
48
48
54
54
62
62
72
72
L1
L1
26
26
27.5
27.5
29
29
29.5
29.5
32.5
32.5
35.5
35.5
38.5
38.5
41.5
41.5
51
51
56
56
27
27
27.5
27.5
30
30
31
31
50
50
55
55
44.5
44.5
63
63
ℓ
ℓ
12
12
14
14
15
15
17
17
21
21
23.5
23.5
27.5
27.5
30.5
30.5
34.5
34.5
40
40
16
16
17
17
17.5
17.5
21.5
21.5
30
30
35.5
35.5
26.5
26.5
41
41
D
D
6
6
8
8
10
10
12
12
15
15
18
18
22
22
28
28
35
35
42
42
6
6
8
8
10
10
12
12
20
20
25
25
30
30
38
38
Tube O.D.
Tube O.D.
6
6
8
8
10
10
12
12
15
15
18
18
22
22
28
28
35
35
42
42
6
6
8
8
10
10
12
12
20
20
25
25
30
30
38
38
27
27
30
30
19
19
24
24
40
40
43
43
35
35
36.5
36.5
22
22
24.5
24.5
14
14
16
16
14
14
16
16
SheavyPN 630
SheavyPN 630
PN 400
PN 400
PN 160
PN 160
PN 315
PN 315
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.Without male stud, but with pre-setted nut and cutting ring for connection.
26 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DRTAAdjustable Run Tee with Standpipe
DEWSwivel Adjustable Elbow with Cone
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
Without male stud, but supplied with fitted O-Ring for connection.
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.
Without male stud, but with pre-setted nut and cutting ring for connection.
Series Part No.
DEW-06LDEW-08LDEW-10LDEW-12LDEW-15LDEW-18LDEW-22LDEW-28LDEW-35LDEW-42LDEW-06SDEW-08SDEW-10SDEW-12S
DEW-20SDEW-25SDEW-30SDEW-38S
DEW-14SDEW-16S
T
M 30×2
M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 26×1.5M 30×2M 36×2M 45×2M 52×2M 14×1.5M 16×1.5M 18×1.5M 20×1.5
M 36×2M 42×2M 52×2
M 22×1.5M 24×1.5
h
1212141719242736415012141717
27364150
1924
L
2729303236404447566331323438
48546272
4043
ℓ
121415172123.527.530.534.540161717.521.5
3035.5
26.5
41
2224.5
H
1417192227323641506017192224
36465060
2730
68
101215182228354268
1012
20253038
1416
LlightPN 315
SheavyPN 630
PN 400
PN 160
PN 315
3
Series
LlightPN 315
Part No.
DRTA-06LDRTA-08LDRTA-10LDRTA-12L
T
DRTA-15LDRTA-18LDRTA-22LDRTA-28LDRTA-35LDRTA-42LDRTA-06SDRTA-08SDRTA-10SDRTA-12SDRTA-14S
DRTA-20SDRTA-25SDRTA-30SDRTA-38S
DRTA-16S
M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 26×1.5M 30×2M 36×2M 45×2M 52×2M 14×1.5M 16×1.5M 18×1.5M 20×1.5
M 30×2M 36×2M 42×2M 52×2
M 22×1.5M 24×1.5
H
1417192227323641506017192224
36465060
2730
h
1212141719242736415012141717
27364150
1924
Tube O.D.
68
101215182228354268
1012
20253038
1416
SheavyPN 630
PN 400
PN 160
PN 315
ℓ1
2627.52929.532.535.538.541.551562727.53031
44.5505563
3536.5
TubeO.D.D
L
2729303236404447566331323438
48546272
4043
L1
5356596269758391
11112358616671
105119
93
138
7579
ℓ1
2627.52929.532.535.538.541.551562727.53031
5055
44.5
63
3536.5
ℓ
121415172123.527.530.534.540161717.521.5
3035.5
26.5
41
2224.5
D
68
101215182228354268
1012
20253038
1416
SHINILACE CO., LTD. 27
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DETSwivel Adjustable Branch Tee with Cone
DELSwivel Adjustable Run Tee with Cone
3
Series Part No.
DET-06LDET-08LDET-10LDET-12LDET-15LDET-18LDET-22LDET-28LDET-35LDET-42LDET-06SDET-08SDET-10SDET-12S
DET-20SDET-25SDET-30SDET-38S
DET-14SDET-16S
T
M 30×2
M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 26×1.5M 30×2M 36×2M 45×2M 52×2M 14×1.5M 16×1.5M 18×1.5M 20×1.5
M 36×2M 42×2M 52×2
M 22×1.5M 24×1.5
h
1212141719242736415012141717
27364150
1924
L
2729303236404447566331323438
48546272
4043
L1
2627.52929.532.535.538.541.551562727.53031
44.5505563
3536.5
ℓ
121415172123.527.530.534.540161717.521.5
3035.5
26.5
41
2224.5
H
1417192227323641506017192224
36465060
2730
TubeO.D.D68
101215182228354268
1012
20253038
1416
LlightPN 315
SheavyPN 630
PN 400
PN 160
PN 315
3
Series
LlightPN 315
Part No.
DEL-06LDEL-08LDEL-10LDEL-12L
T
DEL-15LDEL-18LDEL-22LDEL-28LDEL-35LDEL-42LDEL-06SDEL-08SDEL-10SDEL-12SDEL-14S
DEL-20SDEL-25SDEL-30SDEL-38S
DEL-16S
M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 26×1.5M 30×2M 36×2M 45×2M 52×2M 14×1.5M 16×1.5M 18×1.5M 20×1.5
M 30×2M 36×2M 42×2M 52×2
M 22×1.5M 24×1.5
TubeO.D.D68
101215182228354268
1012
20253038
H
1417192227323641506017192224
36465060
2730
h
1212141719242736415012141717
27364150
1924
L1
5356596169758289
10711958596469
93104117135
7579
L
2729303236404447566331323438
48546272
4043
ℓ1
2627.52929.532.535.538.541.551562727.53031
5055
44.5
63
3536.5
ℓ
121415172123.527.530.534.540161717.521.5
3035.5
26.5
41
2224.5
1416
SheavyPN 630
PN 400
PN 160
PN 315
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.Without male stud, but supplied with fitted O-Ring for connection.
Dimensions given approximate length with tightened nut. All dimensions are in millimeters,for reference only subject to change.Without male stud, but supplied with fitted O-Ring for connection.
28 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Stnadpipe ReducerDKOR
Series L (Light)
Series
PN 315
PN 315
PN 315
PN 315
PN 160
PN 160
PN 160
PN 160
Part No.
DKOR 08L-06L
DKOR 12L-06L
DKOR 12L-08L
DKOR 12L-10L
DKOR 15L-06L
DKOR 15L-08L
DKOR 15L-10L
DKOR 15L-12L
DKOR 18L-06L
DKOR 18L-08L
DKOR 18L-10L
DKOR 18L-12L
DKOR 18L-15L
DKOR 22L-06L
DKOR 22L-08L
DKOR 22L-10L
DKOR 22L-12L
DKOR 22L-15L
DKOR 22L-18L
DKOR 28L-06L
DKOR 28L-08L
DKOR 28L-10L
DKOR 28L-12L
DKOR 28L-15L
DKOR 28L-18L
DKOR 28L-22L
DKOR 35L-06L
DKOR 35L-08L
DKOR 35L-10L
DKOR 35L-12L
DKOR 35L-15L
DKOR 35L-18L
DKOR 35L-22L
DKOR 35L-28L
DKOR 42L-10L
DKOR 42L-12L
DKOR 42L-15L
DKOR 42L-18L
DKOR 42L-28L
DKOR 42L-22L
DKOR 42L-35L
H1
17
H2
14
L
38
Tℓ
23.5 M 14 × 1.58
12
15
18
22
28
35
42
M 18 × 1.5
M 22 × 1.5
M 26 × 1.5
M 30 × 2
M 36 × 2
M 45 × 2
M 52 × 2
22
27
32
36
41
50
60
6
6
8
10
6
8
10
12
6
8
10
12
15
6
8
10
12
15
18
6
8
10
12
15
18
22
6
8
10
12
15
18
22
28
10
12
15
18
28
22
35
DKOR 10L-08L 8 17
14
17
19
14
17
19
22
14
17
19
22
27
14
17
19
22
27
32
14
17
19
22
27
32
36
14
17
19
22
27
32
36
41
19
22
27
32
41
36
50
38
38
38
38
39
39
39
39
39
40
40
42
40
40
41
41
43
43
41
41
42
42
44
44
46
46
46
47
47
49
49
51
52
48
48
50
50
53
52
57
23.5
23.5
23.5
23.5
24.5
24.5
24.5
24.5
24.5
25.5
25.5
26.5
25.5
25.5
26.5
26.5
27.5
27
26.5
26.5
27.5
27.5
28.5
28
30
31.5
31.5
32.5
32.5
33.5
33
35
35
33.5
33.5
34.5
34
36
36
35
TubeD1
O.DD2
Series S (heavy)
Dimensions given approximate length with tightened nut. All dimensions are in millimeters. for reference only subject to change.Without male stud, but with pre-setted nut and cutting ring for connection.
DKOR 38S-25S
DKOR 38S-30S
25
30
46
50
68
71
44
44.5
Series
PN 630
PN 630
PN 630
PN 630
PN 400
PN 400
PN 400
PN 400
PN 315
Part No.
DKOR 08S-06S
DKOR 10S-08S
DKOR 12S-06S
DKOR 12S-08S
DKOR 12S-10S
DKOR 14S-06S
DKOR 14S-08S
DKOR 14S-10S
DKOR 14S-12S
DKOR 16S-06S
DKOR 16S-08S
DKOR 16S-10S
DKOR 16S-12S
DKOR 16S-14S
DKOR 20S-06L
DKOR 20S-08L
DKOR 20S-10L
DKOR 20S-12L
DKOR 20S-14L
DKOR 20S-16L
DKOR 25S-06S
DKOR 25S-08S
DKOR 25S-10S
DKOR 25S-12S
DKOR 25S-14S
DKOR 25S-16S
DKOR 25S-20S
DKOR 30S-06S
DKOR 30S-08S
DKOR 30S-10S
DKOR 30S-12S
DKOR 30S-14S
DKOR 30S-16S
DKOR 30S-20S
DKOR 30S-25S
DKOR 38S-06S
DKOR 38S-08S
DKOR 38S-10S
DKOR 38S-12S
DKOR 38S-14S
DKOR 38S-16S
DKOR 38S-20S
H1
19
H2
17
L
40
41
Tℓ
25
26
M 16 × 1.58
12
14
16
20
25
30
38
M 20 × 1.5
M 22 × 1.5
M 24 × 1.5
M 30 × 2
M 36 × 2
M 42× 2
M 52 × 2
22
27
30
36
46
50
60
6
DKOR 10S-06S 22 17 41 26 M 18 × 1.510 6
8
6
8
10
6
8
10
12
6
8
10
12
14
6
8
10
12
14
16
6
8
10
12
14
16
20
6
8
10
12
14
16
20
25
6
8
10
12
14
16
20
19
17
19
22
17
19
22
24
17
19
22
24
27
17
19
22
24
27
30
17
19
22
24
27
30
36
17
19
22
24
27
30
36
46
17
19
22
24
27
30
36
42
44
42
44
43
45
45
44
44
45
45
48
52
52
50
50
53
53
49
49
53
53
55
55
59
54
54
55
55
58
58
61
64
58
58
59
59
62
62
65
27
29
27
29
26.5
28.5
28.5
29
29
28.5
28.5
30
34
34
33.5
33.5
35
34.5
37
37
36.5
36.5
37
36.5
37.5
39
39
38.5
38.5
40
39.5
39.5
40
43
43
42.5
42.5
44
43.5
43.5
TubeD1
O.DD2
SHINILACE CO., LTD. 29
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
ReducerDR
Series
L SeriesPN 315
PN 160
Part No.
DR08L-06L
DR10L-06L
DR10L-08L
DR12L-06L
DR12L-08L
DR12L-10L
DR15L-06L
DR15L-08L
DR15L-10L
DR15L-12L
DR18L-06L
DR35L-22L
DR18L-08L
DR18L-10L
DR18L-12L
DR18L-15L
DR22L-06L
DR22L-08L
DR22L-10L
DR22L-12L
DR22L-15L
DR22L-18L
DR28L-06L
DR28L-08L
DR28L-10L
DR28L-12L
DR28L-15L
DR28L-18L
DR28L-22L
DR35L-06L
DR35L-08L
DR35L-10L
DR35L-12L
DR35L-15L
DR35L-18L
DR35L-28L
DR42L-06L
DR42L-08L
DR42L-10L
DR42L-12L
DR42L-15L
DR42L-18L
DR42L-22LDR42L-28L
DR42L-35L
H
14
14
17
17
19
17
19
22
17
19
22
27
17
17
17
19
19
19
22
22
22
27
27
27
36
32
32
36
32
41
h
14
14
L
40
42
43
ℓ
25.5
27.5
27.5
8
10
12
15
18
22
28
35
42
14
14
14
14
14
14
14
17
14
17
17
17
17
17
19
19
19
19
19
24
24
24
24
24
24
27
30
3030
30
30
30
32
36
36
36
36
36
36
36
36
46
42
44
43
44
44
45
45
46
46
47
47
49
48
48
49
49
51
52
48
4850
50
52
53
57
53
53
55
55
58
58
62
63
56
27.5
29
27.5
29
28.5
30
30
31
31
32
32
33
33
33
34
34
35
34.5
33
3334
34
35
36
36.5
38.5
38.5
39.5
39.5
40.5
40
42
42
41
17
19
22
27
32
36
41
50
6
6
8
6
8
10
6
8
10
12
6
8
10
12
15
6
8
10
12
15
18
6
810
12
15
18
22
6
8
10
12
15
18
22
6
8
10
12
15
18
22
35
46
46
46
46
46
46
46
46
56
58
58
60
60
62
64
67
41
42
42
43
42.5
44.5
44.5
43.5
TubeO.DD2
TubeO.DD1
Dimensions given approximate length with tightened nut. All dimensions are in millimeters. for reference only subject to change.
Series
S SeriesPN 630
PN 400
Part No.
DR08S-06S
DR10S-06S
DR10S-08S
DR12S-06S
DR12S-08S
DR12S-10S
DR14S-06S
DR14S-08S
DR14S-10S
DR14S-12S
DR16S-06S
DR16S-08S
DR16S-10S
DR16S-12S
DR16S-14S
DR20S-06S
DR20S-08S
DR20S-10S
DR20S-12S
DR20S-14S
DR20S-16S
DR25S-06S
DR25S-08S
DR25S-10S
DR25S-12S
DR25S-14S
DR25S-16S
DR25S-20S
DR30S-06S
DR30S-08S
DR30S-10S
DR30S-12S
DR30S-14S
DR30S-16S
DR30S-20S
DR30S-25S
DR38S-06L
DR38S-08L
DR38S-10L
DR38S-12L
DR38S-14S
DR38S-16S
DR38S-20S
DR38S-25S
DR38S-30S
H
17
17
19
19
22
19
22
24
19
22
24
27
19
19
19
22
22
22
24
24
24
27
27
27
36
30
30
36
30
46
h
17
17
L
43
45
45
ℓ
28
30.5
30.5
8
10
12
14
16
20
25
30
38
17
17
17
17
17
17
17
6
6
8
6
8
10
6
8
10
12
6
8
10
12
14
6
8
10
12
14
16
6
8
10
12
14
16
20
6
8
10
12
14
16
20
25
6
17
17
17
19
17
17
19
24
17
17
19
22
24
22
22
22
22
24
27
27
27
27
27
27
27
32
32
32
32
32
32
32
32
41
41
47
51
47
51
48
52
52
53
53
54
55
57
58
58
59
59
62
62
62
62
63
63
66
66
70
67
67
68
68
71
71
74
77
72
32.5
36.5
32.8
36.5
32
36
36
38.5
38.5
38
38.5
39.5
43
43
42.5
42.5
44
43.5
47.5
47.5
47
47
48.5
48
48
52
52
51.5
51.5
53
52.5
52.5
53
57
19
22
24
27
30
36
46
50
8
10
12
14
16
20
25
30
41
41
41
41
41
41
41
46
72
73
73
76
76
7982
89
57
56.5
56.5
58
57.5
57.558
58.5
TubeO.DD2
TubeO.DD1
PN 315
30 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Swivel Reducing Adaptor with ConeDRED
Series L (Light)
Series
PN 315
PN 315
PN 315
PN 315
PN 315
PN 160
PN 160
PN 160
PN 160
Part No.
DRED 08L-06L
DRED 10L-06L
DKOR 10L-08L
DRED 12L-06L
DRED 12L-08L
DRED 12L-10L
DRED 15L-06L
DRED 15L-08L
DRED 15L-10L
DRED 15L-12L
DRED 18L-06L
DRED 18L-08L
DRED 18L-10L
DRED 18L-12L
DRED 18L-15L
DRED 22L-06L
DRED 22L-08L
DRED 22L-10L
DRED 22L-12L
DRED 22L-15L
DRED 22L-18L
DRED 28L-06L
DRED 28L-08L
DRED 28L-10L
DRED 28L-12L
DRED 28L-15L
DRED 28L-18L
DRED 28L-22L
DRED 35L-06L
DRED 35L-08L
DRED 35L-10L
DRED 35L-12L
DRED 35L-15L
DRED 35L-18L
DRED 35L-22L
DRED 35L-28L
DRED 42L-10L
DRED 42L-06L
DRED 42L-12L
DRED 42L-08L
DRED 42L-15L
DRED 42L-18L
DRED 42L-28L
DRED 42L-22L
DRED 42L-35L
H1
17
H2
14 14
14 17
17
h L ℓ
8
10
12
15
18
22
28
28.5
35
42
22
27
32
36
41
50
60
17
14
17
19
19
14
17
19
22
22
14 25
17
19
22
27
14
17
19
22
27
32
14
17
19
22
27
32
36
36
14
17
19
22
27
32
36
46
41
14
17
19
22
27
32
41
36
50
50
39
39.5
39.5
40
42
40
42
41
43
43
43
47
49
55
55
43
47
49
55
55
44.5
48
50
56
56
44.5
48
50
56
56
44.5
49
51
57
58
50
52
58
58
54
60
60
60
61
65
24.5
24.5
25
27.5
24.5
25
27.5
26
28.5
28.5
28
32
34
40
40.5
28
32
34
40
40.5
29.5
33
35
41
41.5
29.5
33
35
41
41.5
30.5
34
36
42
42.5
33.5
35.5
41.5
42
37.5
43.5
44
43.5
44
43
TubeD1
O.DD2
6
68
6
8
10
6
8
10
12
6
8
10
12
15
6
8
10
12
15
18
6
8
10
12
15
18
22
6
8
10
12
15
18
22
28
6
8
10
12
15
18
22
28
35
Series S (heavy)
Series
PN 630
PN 630
PN 630
PN 630
PN630
PN 400
PN 400
PN 400
PN 315
Part No.
DRED 08S-06S
DRED 10S-06S
DRED 10S-08S
DRED 12S-06S
DRED 12S-08S
DRED 12S-10S
DRED 14S-06S
DRED 14S-08S
DRED 14S-10S
DRED 14S-12SDRED 16S-06S
DRED 16S-08L
DRED 16S-10S
DRED 16S-12S
DRED 16S-14S
DRED 20S-06S
DRED 20S-08S
DRED 20S-10S
DRED 20S-12S
DRED 20S-14S
DRED 20S-16S
DRED 25S-06S
DRED 25S-08S
DRED 25S-10S
DRED 25S-12S
DRED 25S-14S
DRED 25S-16S
DRED 25S-20S
DRED 30S-06S
DRED 30S-08S
DRED 30S-10S
DRED 30S-12S
DRED 30S-14S
DRED 30S-16S
DRED 30S-20S
DRED 30S-25S
DRED 38S-10S
DRED 38S-06S
DRED 38S-12S
DRED 38S-08S
DRED 38S-14SDRED 38S-16S
DRED 38S-25S
DRED 38S-20S
DRED 38S-30S
H1
19
H2
17 17
17 17
19
h L ℓ
8
12
14
16
20
25
28.5
30
38
24
22
27
30
36
46
50
60
19
17
19
22
17
19
22
24
22
17 24
19
22
24
27
17
19
22
24
27
30
17
19
22
24
27
30
36
36
17
19
22
24
27
30
36
41
46
17
19
22
24
2730
46
36
50
50
44
44
44
45
47.5
45
47.5
46
48.5
48.550.0
54
58
66
70.5
50
54
58
66
70.5
51
55
59
67
71.5
51
55
59
67
71.5
54
58
62
70
74.5
58
62
70
74.5
66
73
78.5
76
81.585.5
28
29.5
30
33
29.5
30
33
29.5
32.5
32.535
39
43.5
51
56
35
39
43.5
51
56
34.5
38.5
43
50.5
55.5
34.5
38.5
43
50.5
55.5
36
40
44.5
52
57
39.5
44
51.5
56.5
44
51.5
56.5
52
5758.5
TubeD1
O.DD2
6
6
8
6
8
10
10
6
8
10
126
8
10
12
14
6
8
10
12
14
16
6
8
10
12
14
16
20
6
8
10
12
14
16
20
25
6
8
10
12
1416
20
2530
Dimensions given approximate length with tightened nut. All dimensions are in millimeters. for reference only subject to change.Without male stud, but supplied with fitted O-Ring for connection.
SHINILACE CO., LTD. 31
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Adaptor (BSP Paralled/Metric Paralled) with *ED-RingDA-GED/MED
for BSP Paralled
for Metric Paralled
TG(PF)
TM(Metric)
Series
Series
PN 315
LlightPN 315
LlightPN 315
PN 160
PN 160
SheavyPN 630
SheavyPN 630
PN 400
PN 400
Part No.
Part No.
DA 06L-01GED
DA 06L-M10ED
DA 08L-02GED
DA 08L-M12ED
DA 10L-02GED
DA 10L-M14ED
DA 12L-03GED
DA 12L-M16ED
DA 15L-04GED
DA 15L-M18ED
DA 18L-04GED
DA 18L-M22ED
DA 22L-06GED
DA 22L-M26ED
DA 28L-08GED
DA 28L-M33ED
DA 35L-10GED
DA 35L-M42ED
DA 42L-12GED
DA 42L-M48ED
DA 06S-02GED
DA 06S-M12ED
DA 08S-02GED
DA 08S-M14ED
DA 10S-03GED
DA 10S-M16ED
DA 12S-03GED
DA 12S-M18ED
DA 12S-04GED
DA 14S-M20ED
DA 14S-04GED
DA 16S-M22ED
DA 06S-04GED
DA 20S-M27ED
DA 16S-06GED
DA 25S-M33ED
DA 20S-06GED
DA 30S-M42ED
DA 25S-08GED
DA 38S-M48ED
DA 30S-10GEDDA 38S-12GED
H
H
6
6
14
14
14
14
14
14
8
8
8
8
17
17
19
17
19
17
12
12
10
10
19
19
19
19
19
19
12
12
12
12
22
22
22
22
22
22
12
12
15
15
27
27
27
24
27
24
14
14
18
18
32
32
27
27
27
27
14
14
22
22
36
36
32
32
32
32
16
16
28
28
41
41
41
41
40
40
18
18
35
35
50
50
50
50
50
50
20
20
42
42
60
60
55
55
55
55
22
22
6
6
17
17
19
17
19
17
12
12
8
8
19
19
19
19
19
19
12
12
10
10
22
22
22
22
22
22
12
12
12
12
24
24
22
24
22
24
12
12
12
14
24
27
27
27
27
27
14
14
14
16
27
30
27
27
27
27
14
14
16
20
30
36
27
32
27
32
14
16
16
25
30
46
32
41
32
40
16
18
20
30
36
50
32
50
32
50
16
20
25
38
46
60
41
55
40
55
18
22
30 50 50 50 2038 60 55 55 22
1/81/41/43/81/21/23/41
1 1/41 1/2
1/41/43/83/81/21/21/23/43/41
1 1/41 1/2
M 10×1M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 26×1.5M 33×2M 42×2M 48×2M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 20×1.5M 22×1.5M 27×2M 33×2M 42×2M 48×2
M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 26×1.5M 30×2M 36×2M 45×2M 52×2M 14×1.5M 16×1.5M 18×1.5M 20×1.5M 20×1.5M 22×1.5M 24×1.5M 24×1.5M 30×2M 36×2M 42×2M 52×2
M 12×1.5M 14×1.5M 16×1.5M 18×1.5M 22×1.5M 26×1.5M 30×2M 36×2M 45×2M 52×2M 14×1.5M 16×1.5M 18×1.5M 20×1.5M 22×1.5M 24×1.5M 30×2M 36×2M 45×2M 52×2
24.529.527.53432
31.532.535
42.546.527
29.53234
34.536.5373943485160
24.526.527.530.531.531.532.535
42.546.527
29.53234
36.53743485160
h
h
K
K
L
L
T1
T1
ℓ
ℓ
Tube O.D.D
Tube O.D.D
Dimensions given approximate length with tightened nut. All dimensions are in millimeters. for reference only subject to change.Without male stud, but with pre-setted nut and cutting ring for connection.
32 SHINILACE CO., LTD.
From E stud end
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Swivel Adaptor (BSP Paralled/Metric Paralled) with *ED-RingDEGE-G/M
for BSP Paralled
for Metric Paralled
Series
Series
PN160
PN160
PN 400
PN 400
PN 315
PN 315
Part No.
Part No.
LlightPN 315
LlightPN 315
SheavyPN 630
SheavyPN 630
H
H
h
h
K
K
L
L
ℓ
ℓ
T1
T1
TG(PF)
TM(Metric)
Tube O.D.D
Tube O.D.D
6
6
14
14
14
14
14
14
24.5
24.5
8
8
18
18
32
32
27
27
27
27
31.5
31.5
14
14
8
8
17
17
19
19
19
17
29.5
26.5
12
12
22
22
36
36
32
32
32
32
32.5
32.5
16
16
6
6
17
17
19
17
19
17
27
27
12
12
14
14
27
27
27
27
27
26
36.5
36.5
14
14
10
10
19
19
19
19
19
19
27.5
27.5
12
12
28
28
41
41
41
41
40
40
35
35
18
18
8
8
19
19
19
19
19
19
29.5
29.5
12
12
16
16
30
30
27
27
27
27
37
37
14
14
12
12
22
22
22
22
22
22
34
30.5
12
12
35
35
50
50
50
50
50
50
42.5
42.5
20
20
10
10
22
22
22
22
22
22
32
32
12
12
20
20
36
36
32
32
32
32
43
43
16
16
30
30
50
50
50
50
50
50
51
51
20
20
15
15
27
27
27
24
27
24
32
31.5
14
14
42
42
60
60
55
55
55
55
46.5
46.5
22
22
12
12
24
24
22
24
22
24
34
34
12
12
25
25
46
46
41
41
40
40
48
48
18
18
38
38
60
60
55
55
55
55
60
60
22
22
Dimensions given approximate length with tightened nut. All dimensions are in milimeters, for reference only subject to change.
Without male stud, but supplied with fitted O-Ring for connection.
DEGE 06L-01G
DEGE 06L-M10
DEGE 10L-02G
DEGE 10L-M14
DEGE 35L-10G
DEGE 35L-M42
DEGE 14S-04G
DEGE 14S-M20
DEGE 15L-04G
DEGE 15L-M18
DEGE 06S-02G
DEGE 06S-M12
DEGE 20S-06G
DEGE 20S-M27
DEGE 22L-06G
DEGE 22L-M26
DEGE 10S-03G
DEGE 10S-M16
DEGE 30S-10G
DEGE 30S-M42
DEGE 08L-02G
DEGE 08L-M12
DEGE 12L-03G
DEGE 12L-M16
DEGE 42L-12G
DEGE 42L-M48
DEGE 16S-04G
DEGE 16S-M22
DEGE 18L-04G
DEGE 18L-M22
DEGE 08S-02G
DEGE 08S-M14
DEGE 25S-08G
DEGE 25S-M33
DEGE 28L-08G
DEGE 28L-M33
DEGE 12S-03G
DEGE 12S-M18
DEGE 38S-12G
DEGE 38S-M48
M 30 X 2
M 30 X 2
3/4
M 30 X 2
M 30 X 2
3/4
M27 X 2
M 36 X 2
M 36 X 2
1
M33 X 2
M 36 X 2
M 36 X 2
1
M33 X 2
M 45 X 2
M 45 X 2
1 1/4
M42 X 2
M 42 X 2
M 42 X 2
1 1/4
M42 X 2
M 52 X 2
M 52 X 2
1 1/2
M48 X 2
M 52 X 2
M 52 X 2
1 1/2
M48 X 2
M 12 X 1.5
M 12 X 1.5
1/8
M 16 X 1.5
M 16 X 1.5
1/4
M 16 X 1.5
M 16 X 1.5
1/4
M 22 X 1.5
M 22 X 1.5
1/2
M 20 X 1.5
M 20 X 1.5
3/8
M18 X 1.5
M 14 X 1.5
M 14 X 1.5
1/4
M 14 X 1.5
M 14 X 1.5
1/4
M14 X 1.5M12 X 1.5
M 18 X 1.5
M 18 X 1.5
3/8
M 18 X 1.5
M 18 X 1.5
3/8
M16 X 1.5
M 26 X 1.5
M 26 X 1.5
1/2
M26 X 1.5
M10 X 1
M14 X 1.5
M18 X 1.5
M12 X 1.5
M16 X 1.5
M22 X 1.5
M 22 X 1.5
M 22 X 1.5
1/2
M20 X 1.5
M 24 X 1.5
M 24 X 1.5
1/2
M22 X 1.5
SHINILACE CO., LTD. 33
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Swivel Union with ConeDUE
Series
PB 400
PN 630
PB 250
PN 400
LlightPN 500
SheavyPB 800
Part No.
DEU-06LDEU-08LDEU-10L
DEU-12LDEU-15LDEU-18LDEU-22LDEU-28LDEU-35LDEU-42LDEU-06SDEU-08SDEU-10SDEU-12SDEU-14SDEU-16SDEU-20SDEU-25SDEU-30SDEU-38S
Tube O.D.
6
18
8
22
6
14
10
28
8
16
12
35
10
20
30
15
42
12
25
38
H
17
32
17
36
17
27
19
46
19
30
22
50
22
36
50
27
60
24
46
60
ℓ1
3636
47
39
48
37
49
39
50
37
58
43
60
73
40
59
44
66
83
42.5
ℓ2
3434
45
37
45
36
47
37
46
36
53
41
55
62
39
53
43
58
67
40.5
L
6464
71
92
67
73
99
71
78
82
87
89.5102
113
110
126
127
144
139
165
Dimensions given approximate length with tightened nut. All dimensions are in milimeters, for reference only subject to change.Without male stud, but supplied with fitted O-Ring for connection.
34 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Banjo Fittings (BSP Paralled/Metric Paralled) with DKA-RingDSWVE-G/M
for BSP Paralled
for Metric Paralled
Series
Series
PB 160
PB 160
PB 160
PB 160bar
Part No.
Part No.
MA*
MA*
LlightPB 250
LlightPB 250
SheavyPB 250
SheavyPB 250
DSWVE 06L-01G
DSWVE 06L-M10
DSWVE 10L-02G
DSWVE 10L-M14
DSWVE 08S-02G
DSWVE 08S-M14
DSWVE 15L-04G
DSWVE 15L-M18
DSWVE 12S-03G
DSWVE 12S-M18
DSWVE 22L-06G
DSWVE 22L-M26
DSWVE 16S-04G
DSWVE 16S-M22
DSWVE 08L-02G
DSWVE 08L-M12
DSWVE 12L-03G
DSWVE 12L-M16
DSWVE 10S-03G
DSWVE 10S-M16
DSWVE 18L-04G
DSWVE 18L-M22
DSWVE 14S-04G
DSWVE 14S-M20
DSWVE 06S-02G
DSWVE 06S-M12
DSWVE 20S-06G
DSWVE 20S-M27
H
H
h
h
L
L
L1
L1
D
D
TubeO.D.
TubeO.D.
TG(PF)
TM(Metric)
6
6
6
6
14.5
14.5
14
14
19
19
14
14
14
14
19
19
19
19
30
30
27
27
25
25
21
21.5
10.5
10.5
15.5
15.5
20.5
20.5
21.5
21.5
21.5
21.5
21.5
21.5
25.5
25.5
24.5
24.5
1/8
M 10 X 1M 12 X 1.5
M 12 X 1.5
M 16 X 1.5
M 16 X 1.5
M 22 X 1.5
M 20 X 1.5
M 14 X 1.5
M 14 X 1.5
M 18 X 1.5
M 18 X 1.5
M 26 X 1.5
M 22 X 1.5M 27 X 2
20
25
1/2 100
90
3/8 70
65
8
8
8
8
18.5
17.5
18.5
19.5
17
17
22
22
19
19
19
17
22
22
22
22
32
32
32
32
28
27
27
25
1/4 45
40
1/2 100
130
3/8 70
90
10
10
10
10
18.5
19.5
22.5
21.5
19
19
24
24
19
19
19
19
24
24
24
24
33
33
37
37
29
29
27
27
1/4 45
55
3/4 140
140
1/2 100
120
12
12
12
12
22.5
21.5
22.5
23.5
22
22
27
27
22
22
22
22
27
27
27
27
38
38
37
37
30
30
32
32
3/8 70
65
1/4 45
55
1/4 45
40
1/2 100
130
3/4 140
150
15
15
14
14
26.5
23.5
26.5
25.5
27
27
30
30
27
24
27
24
30
30
27
27
40
40
44
44
34
33
37.5
37.5
13
12
15
14
16
16
11
9
18
18
11
11
6
6
10
10
9
9
13
13
13
13
24
24
9
9
13
13
9
9
18
18
18
18
16
16
26
27
26
27
32
32
36
36
30
30
27
27
36
36
32
32
46
46
49
49
37
37
44
44
14
14
15
15
17
17
20
20
19
17.5
11
11
13
13
24
24
9
9
13
12
9
9
15
15
9
9
13
12
9
9
15
15
11
11
18
18
22
22
20
20
32
31
32
32
36
36
36
36
32
32
42
42
49
49
18.5
17.5
17
17
19
17
19
17
30
29
27
25
ℓ
ℓ
ℓ1
ℓ1
h1
h1
ℓ2
ℓ2
Dimensions given approximate length with tightened nut. All dimensions are in milimeters,for reference only subject to change.
*MA = Recommended tightening torques (in Nm) for male G and M.
SHINILACE CO., LTD. 35
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DWH-G/MHigh Pressure Banjo Fittings (BSP Paralled/Metric Paralled) with DKA-Ring
Dimensions given approximate length with tightened nut. All dimensions are in milimeters,for reference only subject to change.*MA = Recommended tightening torques (in Nm) for male G and M.
Series
Series
LlightPB 315
LlightPB 315
PB 160
PB 160
SheavyPB 400
SheavyPB 400
PB 250
PB 250
14
14
TubeO.D
TubeO.D
TG(PF)
TM(Metric)
D
D
H
H
h
h
h1
h1
L
L
L1
L1
t
t
MA*
MA*
DWH 06L-01GDWH 08L-02GDWH 10L-02GDWH 12L-03GDWH 15L-04GDWH 18L-04GDWH 22L-06GDWH 28L-08GDWH 35L-10GDWH 42L-12GDWH 06S-02GDWH 08S-02GDWH 10S-03GDWH 12S-03GDWH 16S-04GDWH 20S-06GDWH 25S-08GDWH 30S-10GDWH 38S-12G
DWH 06L-M10DWH 08L-M12DWH 10L-M14DWH 12L-M16DWH 15L-M18DWH 18L-M22DWH 22L-M26DWH 28L-M33DWH 35L-M42DWH 42L-M48DWH 06S-M12DWH 08S-M14DWH 10S-M16DWH 12S-M18DWH 16S-M22DWH 20S-M27DWH 25S-M33DWH 30S-M42DWH 38S-M48
Part NO.
Part NO.
6
6
8
8
10
10
12
12
15
15
18
18
22
22
28
28
35
35
42
42
6
6
8
8
10
10
12
12
16
16
20
20
25
25
30
30
38
38
18
17
18
19
22
21
26
23
26
27
32
31
39
39
49
49
55
55
18
17
18
19
22
21
22
23
26
27
32
32
39
39
49
49
55
55
14
14
17
17
19
19
22
22
27
27
32
32
36
36
41
41
50
50
60
60
17
17
19
19
22
22
24
24
30
30
36
36
46
46
50
50
60
60
17
17
22
22
22
22
27
27
32
30
32
32
41
41
50
50
60
60
70
70
22
22
22
22
27
27
27
30
32
32
41
41
50
50
60
60
70
70
27
27
10.5
10.5
29
29
14
14
30
30
14
14
33
33
16.5
16.5
37
36
21.5
18.5
37
37
21.5
21.5
44
44
24
24
49
49
30.5
30.5
58
58
35.5
35.5
63
63
40.5
40.5
31
31
14
14
31
31
14
14
35
35
16.5
16.5
35
36
16.5
18.5
40
40
21.5
21.5
48
48
24
24
56
56
30.5
30.5
64
64
34.5
35.5
72
72
40.5
40.5
24
24
2.5
2.5
30
30
3.0
3.0
30
30
3.0
3.0
36
36
3.0
3.0
45
39.5
4.5
3.0
45
45
4.5
4.5
53
53
3.5
3.5
66
66
3.5
3.5
76
76
3.5
3.5
87
87
3.5
3.5
30
30
3.0
3.0
30
30
3.0
3.0
36
36
3.0
3.0
36
39.5
3.0
3.0
45
45
4.5
4.5
53
53
3.5
3.5
66
66
3.5
3.5
76
76
3.5
3.5
87
87
3.5
3.5
12
12
1/8
M 10 × 1M 12 × 1.5M 14× 1.5M 16 × 1.5M 18 × 1.5M 22 × 1.5M 26 × 1.5M 33 × 2M 42 × 2M 48 × 2M 12 × 1.5M 14 × 1.5M 16× 1.5M 18 × 1.5M 22 × 1.5M 27 × 2M 33 × 2M 42 × 2M 48 × 2
14.5
14.5
1/415.5
15.5
1/418
18
3/821.5
20.5
1/221
21
1/227.5
27.5
3/432
32
136
36
1 1/440.5
40.5
1 1/216.5
16.5
1/416.5
16.5
1/418.5
18.5
3/818.5
20
3/822
22
1/226.5
26.5
3/431.5
31.5
137
37
1 1/441.5
41.5
1 1/2
8
8
20
25
12
12
50
50
12
12
50
60
12
12
75
90
14
12
130
110
14
14
130
150
16
16
250
350
18
18
350
400
20
20
600
600
22
22
800
800
12
12
50
50
12
12
50
60
12
12
75
90
12
12
75
110
14
14
130
150
16
16
250
350
18
18
350
400
20
20
600
600
22
22
800
800
17
17
19
19
19
19
24
24
30
27
30
30
36
36
46
46
55
55
60
60
19
19
19
19
24
24
24
27
30
30
36
36
46
46
55
55
60
60
For BSP Paralled
For Metric Paralled
ℓ
ℓ
ℓ1
ℓ1
ℓ2
ℓ2
36 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DTH-G/MHigh Pressure Banjo Fittings (BSP Paralled/Metric Paralled)
Series
LlightPB 315
PB 160
SheavyPB 400
PB 250
14
TubeO.D
TG(PF)D H h h1 L L1 t MA*
DTH 06L-01GDTH 08L-02GDTH 10L-02GDTH 12L-03GDTH 15L-04GDTH 18L-04GDTH 22L-06GDTH 28L-08GDTH 35L-10GDTH 42L-12GDTH 06S-02GDTH 08S-02GDTH 10S-03GDTH 12S-03GDTH 16S-04GDTH 20S-06GDTH 25S-08GDTH 30S-10GDTH 38S-12G
Part NO.
68
101215182228354268
10121620253038
181822262632394955181822222632394955
14171922273236415060171922243036465060
17222227323241506070222227273241506070
27 10.529 1430 1433 16.537 21.537 21.544 2449 30.558 35.563 40.531 1431 1435 16.535 16.540 21.548 2456 30.564 35.572 40.5
24 2.530 3.030 3.036 3.045 4.545 4.553 3.566 3.576 3.587 3.530 3.030 3.036 3.036 3.045 4.553 3.566 3.576 3.587 3.5
12 1/814.5 1/415.5 1/418 3/8
21.5 1/221 1/2
27.5 3/432 136 1 1/4
40.5 1 1/216.5 1/416.5 1/418.5 3/818.5 3/822 1/2
26.5 3/431.5 137 1 1/4
41.5 1 1/2
8 2012 5012 5012 7514 13014 13016 25018 35020 60022 80012 5012 5012 7512 7514 13016 25018 35020 60022 800
17191924303036465560191924243036465560
For BSP Paralled
ℓ ℓ1 ℓ2
Series
LlightPB 315
PB 160
SheavyPB 400
PB 250
14
TubeO.D
TM(Metric)D H h h1 L L1 t MA*
DTH 06L-M10DTH 08L-M12DTH 10L-M14DTH 12L-M16DTH 15L-M18DTH 18L-M22DTH 22L-M26DTH 28L-M33DTH 35L-M42DTH 42L-M48DTH 06S-M12DTH 08S-M14DTH 10S-M16DTH 12S-M18DTH 16S-M22DTH 20S-M27DTH 25S-M33DTH 30S-M42DTH 38S-M48
Part NO.
6810121518222835426810121620253038
171921232731394955171921232732394955
14171922273236415060171922243036465060
17222227303241506070222227303241506070
27 10.529 1430 1433 16.536 18.537 21.544 2449 30.558 35.563 40.531 1431 1435 16.536 18.540 21.548 2456 30.564 35.572 40.5
24 2.530 3.030 3.036 3.0
39.5 3.045 4.553 3.566 3.576 3.587 3.530 3.030 3.036 3.0
39.5 3.045 4.553 3.566 3.576 3.587 3.5
12 M 10 × 1M 12 × 1.5M 14× 1.5M 16 × 1.5M 18 × 1.5M 22 × 1.5M 26 × 1.5M 33 × 2M 42 × 2M 48 × 2M 12 × 1.5M 14 × 1.5M 16× 1.5M 18 × 1.5M 22 × 1.5M 27 × 2M 33 × 2M 42 × 2M 48 × 2
14.515.518
20.521
27.53236
40.516.516.518.52022
26.531.537
41.5
8 2512 5012 6012 9012 11014 15016 35018 40020 60022 80012 5012 6012 9012 11014 15016 35018 40020 60022 800
17191924273036465560191924273036465560
For Metric Paralled
ℓ ℓ1 ℓ2
Dimensions given approximate length with tightened nut. All dimensions are in milimeters,for reference only subject to change.*MA = Recommended tightening torques (in Nm) for male G and M.
SHINILACE CO., LTD. 37
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Pressure Gauge Connector (BSP Paralled) with DKI-Ring
Gauge Connector (BSP Paralled) with Standpipe and DKI-Ring
Swivel Gauge Adaptor (BSP Paralled) with cone and DKI-Ring
DGC-G
DGA-G
DGE-G
Series
Series
Series
Part No.
Part No.
Part No.
LlightPN 315
LlightPN 315
LlightPN 315
SheavyPN 630
SheavyPN 630
All dimensions are in milimeters, for reference only subject to change.
SheavyPN 630
DGC 06L-02G
DGA 06L-02G
DGE 06L-02G
DGC 10L-03G
DGA 10L-02G
DGE 10L-02G
DGC 06S-04G
DGA 06S-04G
DGE 06S-04G
DGE 06S-02G
DGC 10S-04G
DGA 10S-04G
DGE 10S-04G
DGE 10S-02G
DGC 08L-02G
DGA 08L-02G
DGE 08L-02G
DGC 12L-04G
DGA 12L-02G
DGE 12L-02G
DGC 08S-04G
DGA 08S-04G
DGE 08S-04G
DGE 08S-02G
DGC 12S-04G
DGA 12S-04G
DGE 12S-04G
DGE 12S-02G
H
H
H
h
h
h
L
L
L
d
d
d
TubeO.D.
TubeO.D.
TubeO.D.
TG(PF)
TG(PF)
TG(PF)
6
6
6
2.5
3.5
2.5
14
14
14
19
19
19
37
38
35.5
7.5 14.5
14.5
14.5
4.5
4.5
4.5
1/4
1/4
1/4
1/2
1/2
1/2
1/4
8
8
8
5.5
5.5
4
17
17
17
19 37
38
35.5
7.5 14.5 4.5 1/4
1/2
10
10
10
5.5
7.5
5.5
19
19
19
19 38
39.5
36
8.5 14.5 4.5 1/4
1/2
12
12
12
5.5
9
5.5
22
22
22
19 38
40.5
36
8.5 14.5 4.5 1/4
1/2
6
6
6
6
3.5
3.5
2.5
2.5
17
17
17
17
27
27
27
19
46
45
42.5
35.5
11 20
20
20
14.5
5
5
5
4.5
20 58
8
8
8
3.5
4.5
4
4
19
19
19
19
27 46
45
43
35.5
11 20 5
20 510
10
10
10
7.0
6.5
6
6
22
22
22
22
27 47
47
43.5
36
10.512
12
12
12
7.0
7.5
7
7
24
24
24
24
27 47
47.5
45
39
10.5
Dimensions given approximate length with tightened nut. All dimensions are in milimeters,for reference only subject to change.
Dimensions given approximate length with tightened nut. All dimensions are in milimeters,for reference only subject to change.
ℓ ℓ1
ℓ1
ℓ1
ℓ2
ℓ2
ℓ2
38 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Tee Test Coupling with threaded Connection DEMA 3-02G
Test Coupling with threaded Connection M16
DGMA
DEMA3
Series
PB 160
PB 400
PB 315
PB
Part No. Tube O.D.
Part No.
LlightPB 315
SheavyPB 630
PB 630
PB 630
DGMA 3-06LDGMA 3-08LDGMA 3-10LDGMA 3-12LDGMA 3-15LDGMA 3-18LDGMA 3-22LDGMA 3-28LDGMA 3-35LDGMA 3-42LDGMA 3-06SDGMA 3-08SDGMA 3-10SDGMA 3-12SDGMA 3-14SDGMA 3-16SDGMA 3-20SDGMA 3-25SDGMA 3-30SDGMA 3-38S
DEMA3-01G
DEMA3-03G
DEMA3-M10
DEMA3-M14
DEMA3-02G
DEMA3-04G
DEMA3-M12
DEMA3-M16
i T
hH L S
hD3 S1
14 41 178
24142417 50 20.52419 52 22.52422 52 22.53027 55 24.53232 56 23.53636 60 27.54141 61 27.54650 69 25.55560 70 24.52417 54 24.52419 54 24.52422 56 23.52424 56 23.52727 62 26.53030 62 25.53636 69 25.54146 75 26.54650 81 27.55560 90 29
PF 1/8PF 1/4PF 3/8PF 1/2M 10 X 1M 12 X 1.5M 14 X 1.5M 16 X 1.5
50 20.56
6
16
8
8
20
10
10
25
12
12
30
15
14
38
1822283542
5050505053545658616550505050515356586165
18 41 191022 41 221226 41 271414 41 17817 41 171219 41 191221 41 2212
ℓ
Dimensions given approximate length with tightened nut. All dimensions are in milimeters,for reference only subject to change.
SHINILACE CO., LTD. 39
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Welding Connector
Welding Connector with DAK
DAS
DASK
Series
PN 160
PN 400
PN 315
SeriesMax. Pressure
Part No. Tube O.D.
Part No.Tube O.D.
D
LlightPN 315
SheavyPN 630
PB 248
PB 303
PB 234
PB 357
PB 391
PB 303
PB 249
PB 292
PB 321
PB 318
PB 458
PB 474
PB 370
PB 305
PB 378
PB 391
PB 373
PB 433
PB 357
PB 458
PB 460
PB 427
PB 458
PB 248
PB 260
DAS-06LDAS-08LDAS-10LDAS-12LDAS-15LDAS-18LDAS-22LDAS-28LDAS-35LDAS-42LDAS-06SDAS-08SDAS-10SDAS-12SDAS-14SDAS-16SDAS-20SDAS-25SDAS-30SDAS-38S
DASK 10 X 1.0
DASK 10 X 2.0
DASK 20 X 4.0
DASK 12 X 2.0
DASK 25 X 4.0
DASK 16 X 1.5
DASK 30 X 3.0
DASK 16 X 2.5
DASK 30 X 5.0
DASK 20 X 2.0
DASK 38 X 4.0
DASK 10 X 1.5
DASK 12 X 1.5
DASK 25 X 3.0
DASK 12 X 2.5
DASK 25 X 5.0
DASK 16 X 2.0
DASK 30 X 4.0
DASK 16 X 3.0
DASK 30 X 6.0
DASK 20 X 2.5
DASK 38 X 5.0
DASK 20 X 3.0
DASK 38 X 6.0DASK 38 X 7.0
h
HD h
Hd
L
L
192210 8 58
141012 17 14 3114 19 17 3316 22 19 3319 27 22 3722 32 27 4027 36 32 4532 41 41 4740 50 46 5446 60 55 5811 17 14 3413 19 17 3615 22 19 3917 24 22 4119 27 24 4521 30 27 4526 36 32 5131 46 41 5636 50 46 6244 60 55 69
10
12 296
6
16
8
8
20
10
10
25
12
12
30
15
14
38
1822283542
1416181822
22.528.530.532.5351921
22.524.527
26.529.532
35.538
76
222412 9 65 1587
273016 13 74.5 16.5121110
323620 16 84 1915
41
46
55
1412
4625 191715
5030 24222018
6038 30282624
94.5
102
111
19.5
23
23
ℓ
ℓ
Dimensions given approximate length with tightened nut. All dimensions are in milimeters, for reference only subject to change.Without male stud, but with pre-setted nut and cutting ring for connection.
40 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Welding Nipple with *O-Ring
Reducing Welding Nipple with *O-Ring
DAK
DAKR
Pressure RatingPart No. d
10 8 35.5 33769 35.5 3387
13 42.5 3912111016 47.5 43.515141219 55 49.5171524 58.5 51.522201830 66 56.5282624
12
16
20
25
30
38
LTube O.DDFittings DAK and Tube
PN 630 PB 248PB 357PB 458PB 303PB 391PB 474PB 234PB 303PB 370PB 433PB 249PB 303PB 357PB 458PB 292PB 378PB 458PB 248PB 321PB 391PB 460PB 260PB 318PB 373PB 427
PN 630
PN 400
PN 400
PN 400
PN 400
PN 315
ℓ
DAK 10 X 1.0DAK 10 X 1.5DAK 10 X 2.0DAK 12 X 1.5DAK 12 X 2.0DAK 12 X 2.5DAK 16 X 1.5
DAK 20 X 2.0
DAK 16 X 2.0
DAK 20 X 2.5
DAK 16 X 2.5
DAK 20 X 3.0
DAK 16 X 3.0
DAK 20 X 4.0DAK 25 X 3.0DAK 25 X 4.0DAK 25 X 5.0DAK 30 X 3.0DAK 30 X 4.0DAK 30 X 5.0DAK 30 X 6.0DAK 38 X 4.0DAK 38 X 5.0DAK 38 X 6.0DAK 38 X 7.0
Pressure RatingPart No. d1 d2
10 37.5
46.5
37.5
51.5
69.5
47.5
37.5
53.5
72.5
49.5
37.5
56.5
72.5
59.5
72.5
6 1210 8 1212 8 14
3 54 -4 67 -7 -7 -
10 -10 -12 -12 -15 -19 -12 -15 -19 -22 -
12 10 1416 12 1520 12 1520 16 1725 16 1725 20 2030 67
35
51
35
54
35
60
35
63
43
63
16 1730 7020 2030 7025 2038 7916 1738 8220 20
38 8230 2038 8225 20
L1 LTube O.D
D1 D2 Fittings DAK and Tube
PN 630 PB 526PB 526PB 526PB 357PB 474PB 474PB 433PB 433PB 458PB 303PB 303PB 292PB 303PB 303PB 292PB 321
PN 400
PN 315
ℓ
DAKR 1006 X 1.5DAKR 1008 X 2.5DAKR 1208 X 2.0DAKR 1210 X 1.5DAKR 1612 X 2.5DAKR 2012 X 2.5DAKR 2016 X 3.0
DAKR 3020 X 2.5
DAKR 2516 X 3.0
DAKR 3025 X 3.0
DAKR 2520 X 4.0
DAKR 3816 X 2.0
DAKR 3016 X 2.0
DAKR 3820 X 2.5DAKR 3825 X 3.0DAKR 3830 X 4.0
All dimensions are in milimeters, for reference only subject to change.
SHINILACE CO., LTD. 41
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Step1. Pipe to be cut at right angle by sawing and freed from burrs both inside and outside.Step2. Slide nut onto the weld nipple.Step3. Welding nipple and tube to be welded together and weld to be cleaned between runs. The tube and welding nipple must be aligned.Step4. Fit the O-Ring: Attention, do not twist O-Ring: taper, nut and cone must be clean.Step5. Thread on body and nut to be oiled.Step6. Screw on nut by hand. Fully tignten using a spanner with a 1/3 turn.
Installtion Instruction for Welding Nipple Fittings
Ordering information for Welding Nipple Fittings
FiguresFigures
Order No.
DWV
DTV
DWSEV
DGV
Body O-Ring Nut TubeWelding Nipple
Order No.
DGUV
DGEV-R
DGAI
DWEV
DGEVDU (Without Cutting Ring)+DAK
DMC (Without Cutting Ring)+DAK
DL (Without Cutting Ring)+DAK
DMC-ED (Without Cutting Ring)+DAK
DT (Without Cutting Ring)+DAK
DMC (Without Cutting Ring)+DAK
DSVWE (Without Cutting Ring)+DAK
DFC (Without Cutting Ring)+DAK
DLM (Without Cutting Ring)+DAK
42 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Male Female Adaptor (BSP Paralled)
Male Female Adaptor (BSP Paralled)
MFAD
MFAE
PB
PB
Part No.
Part No.
Malestud TG(PF)
Malestud TG(PF)
Femalestud T1G(PF)
Femalestud T1G(PF)
PB 400
PB 250
PB 250
PB 630
PB 630
PB 630
PB 450PB 630
PB 400
PB 250
PB 250
PB 400
PB 400
PB 400
PB 250
PB 250
PB 250PB 250
PB 630PB 400PB 400
MFAD 03-01G
MFAE 01-02G
MFAD 04-02G
MFAE 02-01G
MFAE 06-04G
MFAD 06-03G
MFAE 02-04G
MFAE 06-10G
MFAD 08-03G
MFAE 03-02G
MFAE 08-06G
MFAD 10-04G
MFAE 03-06G
MFAE 08-12G
MFAD 12-04G
MFAE 04-06G
MFAE 10-12G
MFAD 04-01G
MFAE 01-03G
MFAD 06-02G
MFAE 02-03G
MFAE 06-08G
MFAD 08-02G
MFAE 02-06G
MFAE 06-12G
MFAD 08-04G
MFAE 03-04G
MFAE 08-10G
MFAD 10-06G
MFAE 04-03G
MFAE 10-08G
MFAD 12-06G
MFAE 04-08G
MFAE 12-10G
MFAD 03-08G
MFAE 04-10G
MFAE 16-12G
K
K
H
HD
L
L
22
14
22
194
22.5
31
12
8
8 3/8
1/8
1/8
1/4
26
14
27
244
24
32
14
8
8 1/2
1/8
1/8
3/8
26
18
27
195
24
28
14
12
12 1/2
1/4
1/4
1/8
32
18
32
245
26
36
16
12
12 3/4
1/4
1/4
3/8
32
18
32
305
26
40
16
12
12 3/4
1/4
3/8
1/2
39
18
41
365
29
43
18
12
12 1
1/4
1/4
3/4
39
22
41
228
29
36
18
18
12 1
3/8
3/8
1/4
39
22
41
308
29
41
18
18
14 1
3/8
1/2
1/2
49
22
50
368
32
44
20
20
14 1 1/4
3/8
1 1/4
1/2
1 1/2
1/2
1 1/2
1/2
1 1/2
1/23/43/43/43/4111
1 1/41 1/41 1/2
2
1/2
3/4
49
26
50
2712
32
36
20
20
16 3/4
3/8
55
26
55
3612
36
46
22
22
14 1/2
3/4
55
26
55
4112
36
49
22
22
16 3/4
1
55
263232323239393949495568
55
551032164116551660164120552060205025602555327040
36
534151555747575952605862
22
222222222222222222222222
18 1
1 1/41/21
1 1/41 1/23/4
1 1/41 1/2
11 1/21 1/41 1/2
ℓ1
ℓ1
ℓ
ℓ
Male/Female thread adaptors with metric and NPT thresd on request. All dimensions are in milimeters,for reference only subject to change.
1717121720221720221722
24.526.520
24.526.528.522
26.528.524.528.526.528.5
SHINILACE CO., LTD. 43
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Male Female Adaptor (BSP Paralled) with * ED-Ring
Male Female Adaptor (BSP Paralled) with * ED-Ring
MFAD-ED
MFAE-ED
PB
PB
Part No.
Part No.
Malestud TG(PF)
Malestud TG(PF)
Femalestud T1G(PF)
Femalestud T1G(PF)
PB 400
PB 250
PB 250
PB 630
PB 630
PB 630
PB 400PB 630
PB 250
PB 250
PB 250
PB 400
PB 400
PB 400
PB 250
PB 250
PB 250PB 250
PB 630PB 400
PB 400
MFAD 03ED-01G
MFAD 01ED-02G
MFAD 04ED-02G
MFAD 02ED-01G
MFAD 06ED-04G
MFAD 06ED-03G
MFAD 02ED-04G
MFAD 06ED-10G
MFAD 08ED-03G
MFAD 03ED-02G
MFAD 08ED-06G
MFAD 10ED-04G
MFAD 03ED-06G
MFAD 08ED-12G
MFAD 12ED-04G
MFAD 04ED-06G
MFAD 10ED-12G
MFAD 04ED-01G
MFAD 01ED-03G
MFAD 06ED-02G
MFAD 02ED-03G
MFAD 06ED-08G
MFAD 08ED-02G
MFAD 02ED-06G
MFAD 06ED-12G
MFAD 08ED-04G
MFAD 03ED-04G
MFAD 08ED-10G
MFAD 10ED-06G
MFAD 04ED-03G
MFAD 10ED-08G
MFAD 12ED-06G
MFAD 04ED-08G
MFAD 12ED-10G
MFAD 03ED-08G
MFAD 04ED-10G
MFAD 16ED-12G
K
K
H
HD
L
L
22
14
22
194
22.5
31
12
8
8
17
3/8
1/8
1/8
1/4
26
14
27
244
24
32
14
8
8
17
1/2
1/8
1/8
3/8
26
18
27
195
24
28
14
12
12
12
1/2
1/4
1/4
1/8
32
18
32
245
26
36
16
12
12
17
3/4
1/4
1/4
3/8
32
18
32
305
26
40
16
12
12
20
3/4
1/4
3/8
1/2
39
18
41
365
29
43
18
12
12
22
1
1/4
1/4
3/4
39
22
41
228
29
36
18
12
12
17
1
3/8
3/8
1/4
39
22
41
308
29
41
18
12
14
20
1
3/8
1/2
1/2
49
22
50
368
32
44
20
12
14
22
1 1/4
3/8
1 1/4
1/2
1 1/2
1/2
1 1/2
1/2
1 1/2
1/23/43/43/43/4111
1 1/41 1/41 1/2
2
1/2
3/4
49
26
50
2712
32
36
20
14
16
17
3/4
3/8
55
26
55
3612
36
46
22
14
14
22
1/2
3/4
55
26
55
4112
36
49
22
14
16
24.5
3/4
1
55
263232323239393949495568
55
551032164116551660164120552060205025602555327040
36
534151555747575952605862
22
141616161618181820202224
18
26.520
24.526.528.522
26.528.524.528.526.528.5
1
1 1/41/21
1 1/41 1/23/4
1 1/41 1/2
11 1/21 1/41 1/2
ℓ1
ℓ1
ℓ
ℓ
All dimensions are in milimeters, for reference only subject to change.
44 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Blanking Plugs for Port with *ED-Ring
Blanking Plugs with *O-Ring (accord.to ISO 6149-3/DIN 3582)
DVSTI-GED/MED
DVSTI
PB
PB
Part No.(M)
Part No.
Part No.(G) D
D
H
H
- -
- -- -
- -
L
L
TM(Metric)
TM(Metric)
TG(PF)
250
400
630
400
DVSTI-M10ED
DVSTI-M10
DVSTI-M14ED
DVSTI-M14
DVSTI-M18ED
DVSTI-M18
DVSTI-M22ED
DVSTI-M22
DVSTI-M27ED
DVSTI-M27
DVSTI-M42ED
DVSTI-M12ED
DVSTI-M12
DVSTI-M16ED
DVSTI-M16
DVSTI-M20ED
DVSTI-M26ED
DVSTI-M26
DVSTI-M33ED
DVSTI-M33DVSTI-M42
DVSTI-M48ED
DVSTI-10GED
DVSTI-04GED
DVSTI-02GED
DVSTI-06GED
DVSTI-10GED
DVSTI-03GED
DVSTI-08GED
DVSTI-12GED
14
13
5
5
12
14
8
10
M 10 X 1
M 10 X 1
M 27 X 2
M 27 X 2
M 42 X 2M 33 X 2
M 33 X 2M 42 X 2
M 48 X 2
M 12 X 1.5
M 12 X 1.5
M 16 X 1.5
M 16 X 1.5
M 20 X 1.5
M 14 X 1.5
M 14 X 1.5
M 18 X 1.5
M 18 X 1.5
M 22 X 1.5
M 22 X 1.5
M 26 X 1.5
M 26 X 1.5
1/8
1/43/8
1/2
3/41
1 1/41 1/2
17
17
6
6
17
16.5
12
11.5
19
19
6
6
17
16.5
12
11.5
22
21
8
6
17
18
12
13
23.9
23
8
8
17
19.5
12
14.5
25.9
27
10
10
19
20.5
14
15.5
27
31
10
12
19
21
14
16
31.9
32
12
12
21
24
16
19
32
38
12
17
21
25.5
16
19
39.9
48
17
22
22.5
26
16
19.5
49.9 22 22.5 1655 24 22.5 16
ℓ
ℓ
All dimensions are in milimeters, for reference only subject to change.
SHINILACE CO., LTD. 45
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
Blanking Plug with *O-Ring
Tube Cap
Dimensions given approximate length with tight nut. All dimensions are in milimeters,for reference only subject to change.
Series
Series
Part No.
Part No.
L
L
Tube O.DD
Tube O.D.
LlightPN 315/PN 630
LlightPN 315
SheavyPN 630
SheavyPN 630
PN 160
PN 160
PN 400
PN 400
PN 315
PN 315
DVKA-06L/S
DCA-06L
DVKA-08L/S
DCA-08L
DVKA-10L/S
DCA-10L
DVKA-12L/S
DCA-12L
DVKA-22L
DCA-22L
DVKA-15L
DCA-15L
DVKA-28L
DCA-28L
DVKA-18L
DCA-18L
DVKA-35L
DCA-35L
DVKA-42L
DCA-42L
DCA-08S
DVKA-14S
DCA-06S
DCA-10S
DVKA-16S
DCA-12S
DVKA-20S
DCA-14S
DVKA-25S
DCA-16S
DVKA-30S
DCA-20S
DCA-30S
DVKA-38S
DCA-25S
DCA-38S
18.56
6
18.58
8
2010
10
20.512
12
20.515
15
22.518
18
2522
22
25.528
28
3035
35
3042
42
8
22.514
6
10
23.516
12
28.5
30.5
20
14
30
20
30
29
33
25
16
38
25
38
H h
14 12 22 717 14 23 819 17 24 922 19 25 1027 24 26 1132 27 28 11.536 32 30 13.541 41 31 14.550 46 36 14.560 55 39 1617 14 26 1119 17 28 1322 19 29 12.524 22 31 14.527 24 34 1630 27 34 15.536 32 39 17.546 41 44 2050 46 47 20.560 55 54 23
ℓ
DVKA
DCA
46 SHINILACE CO., LTD.
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.
DN DS
Nut Cutting Ring Tube end Dimension
Part No.Nut
Part No.Cutting Ring
TubeO.D
D.NSize
Series
LLverylight
Sheavy
Llight
DN-04LL DS-04LL M 8 X 1.0
d
34.568
10468
101215192430364578
1012162025
H L M
10121417191417192227323641506017192224273036465060
11.5 4 812 5.5 8
12.5 5.5 912.5 6 913 6 915 7 1015 7 1016 7 1116 7 11
17.5 7 1218 7.5 12
20.5 7.5 1421 7.5 1424 10.5 1624 11 16
16.5 7 1216.5 7 1217.5 7.5 1218 7.5 12
20.5 8 1421 8.5 1424 10.5 1627 12 18
29.5 13.5 2032.5 16 22
D D1
57.59.5
11.513.58.1
10.112.314.317.320.324.330.338458.1
10.112.314.316.318.322.927.933
4 46 68 810 1012 126 68 810 1012 1215 1518 1822 2228 2835 3542 426 68 810 1012 1214 1416 1620 2025 2530 3038 38
3468
10468
101216202532403468
1012162030
DN-06LL DS-06LL M 10 X 1.0DN-08LL DS-08LL M 12 X 1.0DN-10LL DS-10LL M 14 X 1.0DN-12LL DS-12LL M 16 X 1.0DN-06L DS-06 M 12 X 1.5DN-08L DS-08 M 14 X 1.5DN-10L DS-10 M 16 X 1.5DN-12L DS-12 M 18 X 1.5DN-15L DS-15 M 22 X 1.5DN-18L DS-18 M 26 X 1.5DN-22L DS-22 M 30 X 2DN-28L DS-28 M 36 X 2DN-35L DS-35 M 45 X 2DN-42L DS-42 M 52 X 2DN-06S DS-06 M 14 X 1.5DN-08S DS-08 M 16 X 1.5DN-10S DS-10 M 18 X 1.5DN-12S DS-12 M 20 X 1.5DN-14S DS-14 M 22 X 1.5DN-16S DS-16 M 24 X 1.5DN-20S DS-20 M 30 X 2DN-25S DS-25 M 36 X 2DN-30S DS-30 M 42 X 2DN-38S
All dimensions are in milimeters, for reference only subject to change.
DS-38 M 52 X 2
ℓ ℓ1
32 41 32
SHINILACE CO., LTD. 47
Bite Type Tube Fitting for DIN 2353SHINILACE CO., LTD.