osersinks - mosertools.commosertools.com/wp-content/uploads/2018/03/Catalogue2018.pdf · The Weha...

3mosersinks.com

MOSER

Visit www.WehaUSA.com to see all our products, videos & technical information or call: 1.877.315.4761 • email: [email protected] your preferred Weha distributor for pricing and ordering 1

Weha Matrix S Diagonal Diamond BladeThe Weha Matrix S is a premium layered diamond blade designed to cut fast, clean and quiet. Unlike other layered blades, the Weha Matrix S diamonds are layered at a diagonal to the core. This allows 100% continuous cutting. Other layered diamonds have a layer of diamond and a layer of filler, then another layer of diamond. Because of the continuous layer of diagonal diamonds, the Weha Matrix S 18mm height will last as long as other 20-25mm height blades.

Weha Black Panther 25mm Bridge Saw BladeThe Weha Black Panther Diamond Blade is a 25mm segment height blade for cutting a wide range of stone such as granite, marble, engineered stone. The Layered Pattern diamond segment design provides fast, clean cutting to achieve optimum performance from the bridge saw. This translates into faster cutting using lower amps.

Weha White Lion Diamond Bridge Saw BladeWeha has built this Quartzite Bridge saw blade specifically to cut Quartzite stone. But it also does awesome on Granite and Engineered stone. The Segment is designed with Layered ARIX technology to give high diamond concentration and continuous diamond contact with the stone. The bond matrix is specifically for quartzite, quartz, granite, and engineered stone.

Part # DescriptionVZ051412 12” Weha Matrix S 12”x60/50x18mm SC Blade

VZ051413 14” Weha Matrix S 14”x60/50x18mm SC Blade

5401115 16” Weha Matrix S 16”x60/50x18mm SC Blade

VZ051468 18” Weha Matrix S 18”x60/50x18mm SC Blade

Part # Description128903 14” x 20mm White Lion Diamond Bridge Saw Blade128904 16” x 20mm White Lion Diamond Bridge Saw Blade128906 18” x 20mm White Lion Diamond Bridge Saw Blade

128908 20” x 20mm White Lion Diamond Bridge Saw Blade128909 24” x 20mm White Lion Diamond Bridge Saw Blade

Part # Description134177 14” x 25mm Black Panther Bridge Saw Blade

134182 16” x 25mm Black Panther Bridge Saw Blade

• 60/50 arbor• Recommended for 10 hp + saws

• Layered diamond technology• 25mm diamond segment height

• Diagonal layered diamond• 18mm lasts as long as 25mm• For all horsepower saws• 12” excellent on CNC saws

• Layered Arrix technology• Increased cutting speed

• Austrian segment• German core• Silent Core• 60/50 arbor

• German Silent Core• 60mm arbor

Diamond BladesDIAMOND BLADES

mosersinks.com

MOSER

4Visit www.WehaUSA.com to see all our products, videos & technical information or call: 1.877.315.4761 • email: [email protected]

Contact your preferred Weha distributor for pricing and ordering2

Weha Marble Bridge Saw BladeWeha Marble Diamond Bridge Saw Blades were made specifically for cutting marbles, limestones, travertines, onyx materials, cultured marble, etc

Weha Marble Diamond Bridge Saw Blades offer a chip free cut, smooth finish, and excellent life. This Marble diamond Bridge Saw blade is designed for 3hp and up bridge saws. Best bridge saw blade for cutting marble.

Part # Description5350021 Weha 14” Marble Bridge Saw Blade

5400021 Weha 16” Marble Bridge Saw Blade

• 7mm x 60mm arbor• 25 segments• Silent Core

Weha Low Horsepower 14” Bridge Saw BladeWeha Low Horse Power Diamond Saw Blades are made specifically for Rail Saws, Track Saws, and Tile Saws that have a 3HP or less motorThe Weha Low Horse Power Diamond Saw Blade have a total outside diameter of 13 7/8". This diameter allows it to fit on the Blue Ripper rail saw and inside other saws with a 14" blade housing. This blade is excellent for the Achilli TSA 3 HP Portable Track Saw.

Part # Description7615 Weha Low Horsepower 14” Bridge Saw Blade

• Total Diameter:13 7/8” 60mm arbor

• 10mm height segment

• Wet cutting only• Chip free cutting• Wet cutting only

• Excellent on natural stone• Chip free on glass material• Excellent with mosaic tile

Weha Ceramik-Dekton BladeThe Weha Ceramik Dekton Blade has been engineered specifically for cutting 2cm and 3cm Dekton and other Ceramic, Porcelain Sintered Stone slabs. The Weha Ceramik blade bond and blade design is uniquely made to provide clean, chip free cuts while providing a faster cut on these extremely hard and brittle surfaces;

Part # Description128583 14” Weha Ceramik-Dekton Blade

128584 16” Weha Ceramik-Dekton Blade

128585 18” Weha Ceramik-Dekton Blade

• 10mm height segment• 60/50 arbor

• Recommended for 10 hp + saws

Weha Blitz 12" Diamond Continuous Rim BladeWeha Blitz 12" x 1" Arbor Continuous Rim Reinforced Core Blade is designed to cut chip free, fast, and provide excellent life due to high diamond concentration. This blade is designed specifically for cutting natural stone, engineered stone and quartz

material with glass. With the Reinforced core, the blade is outstanding for miter cuts.

Part # Description51525 Weha Blitz 12" Diamond Continuous Rim Blade Reinforced Core

Diamond BladesDiamond Blades DIAMOND BLADES

5mosersinks.com

MOSER


Part # Description51472 Weha 5” Matrix Quad Turbo Diamond Blade

51473 Weha 6” Matrix Quad Turbo Diamond Blade

51474 Weha 7” Matrix Quad Turbo Diamond Blade

Part # Description51459 4” Weha ST 4”x7/8”-5/8”x10mm Quad Holes

51460 5” Weha ST 5”x7/8”-5/8”x10mm Quad Holes

51461 6” Weha ST 6”x Dia x 7/8”-5/8”x10mm Quad Holes

51462Q 7” Weha ST 7”x Dia x 7/8”-5/8”x10mm Quad Holes & Dia

Weha Matrix Turbo Blade - PremiumWeha Matrix Quad blades are premium turbo blades designed for granite, marble, ceramic materials. The Weha Matrix blade will give a very sharp, clean cut with great life. Designed with air cool holes to stay cool for continuous cutting. Dry use. May be used wet.

Weha ST Side Cut Quad Turbo Blade Weha ST Side Cut Quad blades are ultra premium turbo blades designed for granite, marble, ceramic materials. The Weha ST blade is extremely aggressive in cutting but leaves the stone super smooth because of the side diamonds. Designed with air cool holes to stay cool for continuous cutting. Strong core for grinder use. Dry use. May be used wet. 4”-10” sizes available.

Part # Description51415 5” Weha Blitz Ultra Premium Quad Turbo Diamond Blade

51416 6” Weha Blitz Ultra Premium Quad Turbo Diamond Blade

51417 7” Weha Blitz Ultra Premium Quad Turbo Diamond Blade

Weha Blitz Ultra Premium Quad Turbo Diamond BladeWeha 5" Blitz Ultra Premium Quad diamond turbo blades were specifically made to exceed quality, performance, life, and expectations of other premium grade blades that are on the market today. Based upon real life fabricator feedback, life expectancy is between 100-130 linear feet of cut. This includes both shop and install use. Not only that but it will leave the stone as smooth as a babies bottom! Designed with air cool holes to stay cool for continuous cutting. The Blitz blade comes with a solid stiff core which will not deflect, bend, or flex during the cut.

• Dry Use• May be used wet

• 7/8"-5/8" - 22x8mm Quad Holes

Part # Description30105 5” Xubi Turbo Blade 5 x 7/8-5/8 - Quad Hole

30106 6" Xubi Turbo Blade 5 x 7/8-5/8 - Quad Hole

Weha Xubi Turbo BladeWeha Xubi Turbo blades are made to give the best cut for the price. This economy blade will cut fast, clean, and wear all the way to the core. You will not find a better blade in this price range.


mosersinks.com

MOSER



• Premium quality• Excellent on natural stone

• Chip free on glass material• Excellent with mosaic tile

• Diamonds on both sides• 2 blades in one • Flip it over for a new blade • Smooth grinding, no chipping

• Comes with quad adapter• Use as a blade • Use a cupwheel • May be used wet or dry

Part # Description51430 4” Weha Mesh Turbo 4”x7/8”-5/8”x10mm Quad Holes

51432 5” Weha Mesh Turbo 5”x7/8”-5/8”x10mm Quad Holes

51433 6” Weha Mesh Turbo 6"x7/8"-5/8"x10mm Quad Holes

51434 7” Weha Mesh Turbo 7"x7/8"-5/8"x10mm

Part # Description5125090 Weha 5”x7/8” Vacuumed Brazed Marble Blade

123667 Weha 6”x7/8” Vacuumed Brazed Marble Blade

Part # Description

51071 5” Weha Duo 4.5”x7/8”-5/8”x10mm with Adapter

Part # Description51506 6”x20mm x 7mm Continuous Rim51509 8”x1”x7mm Continuous Rim51510 10”x1”x20mm x 7mm Continuous Rim51511 12”x1”x20mm x 8mm Continuous Rim

Weha Duo

MarbleBlade

Weha Mesh Turbo BladeWeha Mesh Turbo blade is an extra thin blade designed to leave the material smooth and chip free. Because the blade is only 1.2mm thick, the blade cuts fast on porcelain, granite, and any hard tile. Dry use. May be used wet.

Weha Vacuum Brazed Marble Blade Weha Vacuum Brazed Marble Blade is designed specifically to work on marble, limestone,

travertine, and other soft stones for a virtual chip free cut.

Weha Continuous Rim BladeWeha Continuous Rim Blades are designed to cut chip free, fast, and provide excellent life due to high diamond concentration. This blade is designed specifically for cutting natural stone and glass.

• Only 1.2mm thick• Smooth and chip free cuts

• Excellent on engineered stone• Perfect for porcelain & mosaic tile

• New patented Vacuum Brazing Technology

• Drastically longer life

• Extremely fast, aggressive cut• Outstanding on all marble, limestone,

travertine, etc.

Weha Blitz Double Vac Brazed Contour BladeDiamond Blades

DIAMOND BLADES

7mosersinks.com

MOSER

Visit www.WehaUSA.com to see all our products, videos & technical information or call: 1.877.315.4761 • email: [email protected] your preferred Weha distributor for pricing and ordering4

• Premium quality• Excellent on natural stone

• Chip free on glass material• Excellent with mosaic tile

• Diamonds on both sides• 2 blades in one • Flip it over for a new blade • Smooth grinding, no chipping

• Comes with quad adapter• Use as a blade • Use a cupwheel • May be used wet or dry

Part # Description51430 4” Weha Mesh Turbo 4”x7/8”-5/8”x10mm Quad Holes

51432 5” Weha Mesh Turbo 5”x7/8”-5/8”x10mm Quad Holes

51433 6” Weha Mesh Turbo 6"x7/8"-5/8"x10mm Quad Holes

51434 7” Weha Mesh Turbo 7"x7/8"-5/8"x10mm

Part # Description5125090 Weha 5”x7/8” Vacuumed Brazed Marble Blade

123667 Weha 6”x7/8” Vacuumed Brazed Marble Blade

Part # Description

51071 5” Weha Duo 4.5”x7/8”-5/8”x10mm with Adapter

Part # Description51506 6”x20mm x 7mm Continuous Rim51509 8”x1”x7mm Continuous Rim51510 10”x1”x20mm x 7mm Continuous Rim51511 12”x1”x20mm x 8mm Continuous Rim

Weha Duo

MarbleBlade

Weha Mesh Turbo BladeWeha Mesh Turbo blade is an extra thin blade designed to leave the material smooth and chip free. Because the blade is only 1.2mm thick, the blade cuts fast on porcelain, granite, and any hard tile. Dry use. May be used wet.

Weha Vacuum Brazed Marble Blade Weha Vacuum Brazed Marble Blade is designed specifically to work on marble, limestone,

travertine, and other soft stones for a virtual chip free cut.

Weha Continuous Rim BladeWeha Continuous Rim Blades are designed to cut chip free, fast, and provide excellent life due to high diamond concentration. This blade is designed specifically for cutting natural stone and glass.

• Only 1.2mm thick• Smooth and chip free cuts

• Excellent on engineered stone• Perfect for porcelain & mosaic tile

• New patented Vacuum Brazing Technology

• Drastically longer life

• Extremely fast, aggressive cut• Outstanding on all marble, limestone,

travertine, etc.

Weha Blitz Double Vac Brazed Contour BladeDiamond Blades


5” Weha Matrix Turbo Contour Blade with Side Diamond Cutting

The Weha 5” Turbo Contour Blade with Side Diamond Cutting is a fast cutting, no vibration contour blade. The side diamonds extends a full 1 3/8” down the blade, assuring the side diamonds will cut completely through 3cm material. Ultra grade diamonds, strong core steel, speed, life, no vibration, smooth running,cutting to the line. This is what makes the Weha Matrix Turbo Contour Blade one of the best diamond contour blades, hands down. Due to the quantity and quality of the full 8mm of turbo diamond segments around the rim of, life of the Weha turbo contour blade will out perform other contour blades in this style design.

Part # DescriptionVZDSH5 5” Weha Double Vac Brazed Contour 5”x7/8” - 5/8”

Weha Blitz Double Vac Brazed Contour Blade• Vac Brazed on both sides• Super smooth finish• Turns easily during bowl cutouts• Air cool holes for continuous cutting

Part # Description50505 5” Weha Matrix Contour Blade 5”x7/8” - 5/8”

• Very aggressive• Great life

• Vacuum brazed for life and speed• 7/8-5/8 included

Part # Description30100 5” Xubi Turbo Blade 5 x 7/8-5/8 - 22

Part # Description50510 5” Vacuum Brazed Marble Diamond Conto

Weha Economy 5" Xubi Turbo Contour Blade with Side Diamond Cutting

Weha Economy Xubi Diamond Turbo Contour Blades for Vanity Bowl Cutting in Granite, Marble, Engineered Stone, Quartz.The Weha Xubi Turbo Diamond Granite Contour Blade with Side Diamond Cutting is a fast cutting, no vibration contour blade made specifically for granite vanity bowl cut outs. The Xubi Contour Blade will provide the best performance of any diamond contour blade in its price range.

Weha 5" Vacuum Brazed Marble Diamond Contour Blade

The Weha 5" Vacuum Brazed Marble Contour Blade is designed specifically for cutting vanity holes and radius circle cuts in marble and other soft stones. The vacuum brazed diamond grit used to manufacture the Weha Marble Vanity Contour Blade was made to provide absolute minimal chipping and the cleanest cut of any diamond contour blade on marble. Perfect for cutting marble vanity bowls. The diamonds extend a full 1 1/4" down the Marble Contour blade for easy bowl cutting and tight radius cuts.


mosersinks.com

MOSER



Part # DescriptionVZ051054 Aluminum Quad Adapter with Screws

VZ051055 Brass Quad Adapter with Screws

Weha Quad Adapters 5/8-11 ThreadsWeha offers 2 quad adapters for your use. Brass adapters are very durable and will last a very long time. Aluminum adapters work very well and light in weight. Both adapters fit practically all blades made for the USA market. Both adapters come with 4 flush mount screws.

Part# Description50287 Weha 4" x 1/4" Diamond Turbo Rodding Blade50289 Weha 5" x 1/4" Diamond Turbo Rodding Blade

Weha Diamond Turbo Rodding BladesWeha Diamond Turbo Rodding Blade for Granite, Marble, Engineered Stone, Quartz, Quartzite, Concrete, Counter Tops The Weha Diamond turbo rodding blade is designed to increase speed in cutting out the rodding channel for the 1/8" thick fiberglass and metal rods. With a full 10mm height of diamond and cooling holes, the Weha Turbo Rodding Blade cuts as fast as a turbo blade but making a 1/4" wide square notch for the rods. The Granite Rodding Turbo Blade makes up 2 Weha EB blades seperated by an 1/8" thick of metal-all welded together. When the blade is cutting, it blows out the stone that goes between the blades, leaving a perfect 1/4 wide groove.

• 7/8" x 5/8"• May be used wet• Max RPM: 12,200

Part# DescriptionPBM4 Weha 4" Ceramica R-Mesh Turbo BladePBM5 Weha 5" Ceramica R-Mesh Turbo BladePBM6 Weha 6" Ceramica R-Mesh Turbo Blade

Weha Ceramica R-Mesh Turbo BladeThe Weha Ceramica R Mesh have been specifically designed for Dekton, Lapitec, and other Sintered Stone

materials that are 2cm and 3cm in thickness. This specially designed bond system will cut fast and as clean as possible when fabricating these extremely hard materials. Also,

these Ceramica blades perform beautifully on granite, marble, quartz and thinner ceramic and porcelain tile.

Diamond BladesDIAMOND POLISHING PADS

9mosersinks.com

MOSER


Part # DescriptionVZ051054 Aluminum Quad Adapter with Screws

VZ051055 Brass Quad Adapter with Screws

Weha Quad Adapters 5/8-11 ThreadsWeha offers 2 quad adapters for your use. Brass adapters are very durable and will last a very long time. Aluminum adapters work very well and light in weight. Both adapters fit practically all blades made for the USA market. Both adapters come with 4 flush mount screws.




Part# DescriptionPBM4 Weha 4" Ceramica R-Mesh Turbo BladePBM5 Weha 5" Ceramica R-Mesh Turbo BladePBM6 Weha 6" Ceramica R-Mesh Turbo Blade

Weha Ceramica R-Mesh Turbo BladeThe Weha Ceramica R Mesh have been specifically designed for Dekton, Lapitec, and other Sintered Stone

materials that are 2cm and 3cm in thickness. This specially designed bond system will cut fast and as clean as possible when fabricating these extremely hard materials. Also,

these Ceramica blades perform beautifully on granite, marble, quartz and thinner ceramic and porcelain tile.

Diamond Blades


Part # Description16450 Weha 4” ES Polishing pad 50 grit164100 Weha 4” ES Polishing pad 100 grit164200 Weha 4” ES Polishing pad 200 grit164400 Weha 4” ES Polishing pad 400 grit164800 Weha 4” ES Polishing pad 800 grit1641500 Weha 4” ES Polishing pad 1500 grit1643000 Weha 4” ES Polishing pad 3000 grit

Weha Engineered Stone Polishing Pads - WetWeha Engineered Stone ES Diamond Polishing Pads are made with non marking, no dye, white resin with high concentration diamonds. This allows the Weha ES Diamond Polishing pads to bite into the dense quartz and polish very quickly but not burn the resin in the engineered stone. With the traditional 7 step system, the Weha Engineered Stone Diamond Polishing Pads are put in a league of its own. Made specifically for Engineered Stone and Quartz material but will create an outstanding polish on granite, marble, and concrete counter tops. Depending on the type of ES and the color, 7 steps may not need to be used. Regular polishing pads have a tendency t o Burn engineered stones and leave resin marks in the material. The Weha ES diamond polishing pads have completely eliminated any possibility of that happening.

Part # Description11450 4” Weha Schein Polishing Pad 50 grit114100 4” Weha Schein Polishing Pad 100 grit114200 4” Weha Schein Polishing Pad 200 grit114400 4” Weha Schein Polishing Pad 400 grit114800 4” Weha Schein Polishing Pad 800 grit1141500 4” Weha Schein Polishing Pad 1500 grit1143000 4” Weha Schein Polishing Pad 3000 grit

Part # Description134FBB Weha 4” Black Buff Final Polish Pad134FBW Weha 4” White Buff Final Polish Pad

Weha Schein Polishing Pads - WetThe Weha Schein pads are a full 3.4mm thick! This very flexible pad will polish quickly, leave a brilliant polish, and will last much longer than standard polishing pads. Perfect for granite, hard marbles, engineered stones. Great pad at a great price! When compared to other polishing pads in their price range, the Schein will out flex, out polish, and out Shein the competition!

• Starts super flexible • Remains super flexible • 3.4mm thick diamond• Up to 5000 RPM

• Perfect polish• Will not burn stone• Super flexible • Up to 5000 RPM

Weha 4” Ultra Buff Final Polish PadsFinding a final polish buff pad to do what it is meant to do has been quite difficult. Finally, Weha has produced a super high quality final buff pad that will achieve the purpose of what a buff pad is supposed to do: To top off the polishing process to perfectly match the original factory finish of the top of the slab or blend in the final touch of a surface scratch. The Weha Final buff pad will achieve that very result, without having to pay a fortune to

get it!

Compare to any buff on the market!

5" also availablePlease visit www.wehausa.com

5" also availablePlease visit www.wehausa.com

Diamond Polishing PadsDIAMOND POLISHING PADS

mosersinks.com

MOSER



Weha Matrix 7 Step High Production Polishing Pads - WetThe Weha 4" Matrix 7 Step Granite Polishing Pads were created with

a very clear purpose in mind. Weha spent time with very high production shops to find out exactly what they were looking for in a polishing pad system. Practically all of these shops are

following a basic workflow. Everything is profiled on the cnc machines. All sinks and vanities are cut out using the finger bits. Most only use 1-3 diamond positions for both the edges and bowls (depending on the profile and stone). Then they free up the cnc and let the fabricators finish the

polishing the edges and bowls by hand using air polishers.Weha threw out the conventional way 7 step granite diamond

polishing pads were made and started from scratch. Weha took each individual grit and customized that diamond matrix to do one of several things: cut faster, last longer, soften the bond, make the bond harder, make them more aggressive, a little finer bond, etc. We then synchronized the entire 7 step sequence so that each grit complimented the previous grit and its matrix. The end result is achieving a perfect polish, at the fastest rate of speed, all the while maximizing the life the pads.This entire process is designed to A) speed up production B) polish the stone as fast as possible to get the piece off the table and on the granite install A frame and C) save the shop as much money as possible on their granite, marble, engineered stone diamond polishing pads.6 Reasons why the Weha Matrix 4" 7 Step Diamond Polishing Pads the best diamond polishing pads for high production shops:1) Lower grits designed to cut fast, be aggressive and higher grits designed to close the stone quickly with a high gloss polish2) Designed to polish as fast as possible3) 3mm thick for maximizing life4) One 7 step diamond polishing pad sequence to polish all stone coming off the cnc machine5) Designed to speed up production6) Priced as competitive as possible without sacrificing finished results

Weha Xubi Pads - WetWeha Xubi diamond polishing pads are absolutely the best bang for

your buck.Xubi pads will provide a higher shine, and longer life than any other pad in this class of diamond polishing pads.Be careful with low cost pads. You may think you are saving money. But based upon the lack of diamond content, thickness of pad, and poor quality, You may pay twice as much per linear foot of polish.

• Outstanding performance• Velcro backed• Excellent for granite & ES• Wet use only• 3 mm thick• Good life

Part # DescriptionVZP450 4“ Xubi Polishing Pad 50 grit

VZP4100 4“ Xubi Polishing Pad 100 grit






VZP4SSET 4" Xubi Polishing Pad Set of 7

Part # Description50401 4“ Matrix Wet Polishing Pad 50 grit

50402 4“ Matrix Wet Polishing Pad 100 grit


50404 4“ Matrix Wet Polishing Pad 400 gritt




50400 4" Matrix Wet Polishing Pad Set of 7


11mosersinks.com

MOSER


Weha Matrix 7 Step High Production Polishing Pads - WetThe Weha 4" Matrix 7 Step Granite Polishing Pads were created with

a very clear purpose in mind. Weha spent time with very high production shops to find out exactly what they were looking for in a polishing pad system. Practically all of these shops are

following a basic workflow. Everything is profiled on the cnc machines. All sinks and vanities are cut out using the finger bits. Most only use 1-3 diamond positions for both the edges and bowls (depending on the profile and stone). Then they free up the cnc and let the fabricators finish the

polishing the edges and bowls by hand using air polishers.Weha threw out the conventional way 7 step granite diamond

polishing pads were made and started from scratch. Weha took each individual grit and customized that diamond matrix to do one of several things: cut faster, last longer, soften the bond, make the bond harder, make them more aggressive, a little finer bond, etc. We then synchronized the entire 7 step sequence so that each grit complimented the previous grit and its matrix. The end result is achieving a perfect polish, at the fastest rate of speed, all the while maximizing the life the pads.This entire process is designed to A) speed up production B) polish the stone as fast as possible to get the piece off the table and on the granite install A frame and C) save the shop as much money as possible on their granite, marble, engineered stone diamond polishing pads.6 Reasons why the Weha Matrix 4" 7 Step Diamond Polishing Pads the best diamond polishing pads for high production shops:1) Lower grits designed to cut fast, be aggressive and higher grits designed to close the stone quickly with a high gloss polish2) Designed to polish as fast as possible3) 3mm thick for maximizing life4) One 7 step diamond polishing pad sequence to polish all stone coming off the cnc machine5) Designed to speed up production6) Priced as competitive as possible without sacrificing finished results

Weha Xubi Pads - WetWeha Xubi diamond polishing pads are absolutely the best bang for

your buck.Xubi pads will provide a higher shine, and longer life than any other pad in this class of diamond polishing pads.Be careful with low cost pads. You may think you are saving money. But based upon the lack of diamond content, thickness of pad, and poor quality, You may pay twice as much per linear foot of polish.

• Outstanding performance• Velcro backed• Excellent for granite & ES• Wet use only• 3 mm thick• Good life

Part # DescriptionVZP450 4“ Xubi Polishing Pad 50 grit







VZP4SSET 4" Xubi Polishing Pad Set of 7

Part # Description50401 4“ Matrix Wet Polishing Pad 50 grit



50404 4“ Matrix Wet Polishing Pad 400 gritt




50400 4" Matrix Wet Polishing Pad Set of 7

Diamond Polishing Pads


Weha Trilogy 3 Step Diamond Polishing Pads - Wet/Dry

Weha Trilogy 3 Step Diamond polishing pads are the absolute best polishing pads specifically for Black, Brown, Gray, Engineered Stone, Quartz stone. But they are equally as good on black absolute, Baltic Brown, Uba Tuba, and other dark granites and marbles. Additionally, they work amazing on light colored engineered stone, quartz, granite, marble, as well with zero bleeding. Absolutely perfect for Silestone, Cambria, Caesarstone, Zodiaq, Santa Marhergita,and all other Quartz Surfaces. So many fabricators are using 5 step or 7 step pads to match the polish on these dark quartz materials. Now with the Weha Trilogy, 3 pads and THATS IT! Not 3 steps and buff. Not 3 steps and 1 more. 3 steps and put it on the truck.

Part # Description13361 4” Weha Trilogy POS 113362 4” Weha Trilogy POS 2 13363 4” Weha Trilogy POS 3

• Dark engineered stone• Wet polish - all stone• Dry polish - granite• Ideal RPM: 4500-5500

Weha 3 Step Hybrid - Wet/DryWeha 3-Step Polishing pads were built with quality, performance, and speed as its driving force. Weha wanted the fabricator to cut their polishing process in half the steps, saving 50% labor, doubling production, while improving the quality of the polish. Weha 3-Step pads have fully achieved this with results that have to be experienced to believe.

Part # Description13347 3” Weha 3 STEP Hybrid POS 113348 3” Weha 3 STEP Hybrid POS 213349 3” Weha 3 STEP Hybrid POS 313351 4” Weha 3 STEP Hybrid POS 113352 4” Weha 3 STEP Hybrid POS 2 13353 4” Weha 3 STEP Hybrid POS 313350 4” Weha 3 Step Hybrid Set of 313355 5” Weha 3 Step Hybrid POS 0 13356 5” Weha 3 Step Hybrid POS 113357 5” Weha 3 Step Hybrid POS 213358 5” Weha 3 Step Hybrid POS 3

Weha Turbo Polishing PadsWeha 3.5” Turbo discs are designed to repolish surface scratches, flat edges, bevels, seams before laminating to get an super tight seam, as well as reaching tight corners with their special flare design. Very aggressive, extremely rigid, the Weha turbo discs will not allow waves during the polishing process and create a factory finished polish.

• Rigid • Flare design• Up to 4500 RPM• Wet use

Part # DescriptionTD3550 Weha 3.5” Turbo Polishing Pad 50 gritTD35100 Weha 3.5” Turbo Polishing Pad 100 gritTD35200 Weha 3.5” Turbo Polishing Pad 200 gritTD35400 Weha 3.5” Turbo Polishing Pad 400 gritTD35800 Weha 3.5” Turbo Polishing Pad 800 gritTD351500 Weha 3.5” Turbo Polishing Pad 1500 gritTD353000 Weha 3.5” Turbo Polishing Pad 3000 grit


mosersinks.com

MOSER



• Max RPM 6000• May be used on granite, marble, quartzite,

natural stone - wet or dry• Engineered stone, quartz stone - wet only

Weha 3 Step Triad Dry Polishing Pads Weha Triad 3 Step Dry Diamond Polish Pads are for granite, marble,

quartzite and all natural stone. The new triangular pattern allows for the maximum amount of diamond to be ceramic crystal coated. This offers the most utilized concentrated diamond possible. Also, this triangular design deflects and releases the maximum amount of heat keeping the ceramic bond 20-30% cooler than other desinged dry diamond polishing pads. The special backing are designed to be extremely durable, does not release the diamonds and offers amazing

flexibility.

Weha Spiral Brick Dry Polishing PadsWeha Spiral Brick dry polishing pads are premium diamond

concentration pads designed to be used both on the jobsite as well as in the shop. With more diamond content, these dry pads polish faster, last longer than standard dry

pads with a brilliant polish,

and still remain extremely flexible throughout the life of the pad. They will create the same high quality polish as 7 step wet pads.

• Super flexible • Up to 5000 RPM• Incredible polish

• May be used wet or dry • Premium quality

Part # DescriptionDPS450 Weha 4” Spiral Brick Dry Pad 50 gritDPS4100 Weha 4” Spiral Brick Dry Pad 100 gritDPS4200 Weha 4” Spiral Brick Dry Pad 200 gritDPS4400 Weha 4” Spiral Brick Dry Pad 400 gritDPS4800 Weha 4” Spiral Brick Dry Pad 800 gritDPS41500 Weha 4” Spiral Brick Dry Pad 1500 gritDPS43000 Weha 4” Spiral Brick Dry Pad 3000 gritDPS4SET Weha 4" Spiral Set of 7 50-3000 grit

Part # Description13371 Weha 4” Triad Polishing Pads Step 113372 Weha 4” Triad Polishing Pads Step 213373 Weha 4” Triad Polishing Pads Step 3

Part # DescriptionD5S41 Weha 4" 5 Step Dry Diamond Polishing Pad Step 1D5S42 Weha 4" 5 Step Dry Diamond Polishing Pad Step 2D5S43 Weha 4" 5 Step Dry Diamond Polishing Pad Step 3D5S44 Weha 4" 5 Step Dry Diamond Polishing Pad Step 4D5S45 Weha 4" 5 Step Dry Diamond Polishing Pad Step 5D5S4SET Weha 4" 5 Step Dry Diamond Polishing Pad Set of 5

Weha 4" 5 Step Dry Diamond Polishing PadsWeha 5-Step Dry Diamond Polishing pads are for polishing granite, marble, concrete and all natural stones. Made from the latest multi-diamond matrix bond technology. Only 5 diamond polishing pads are needed to create the best dry polish.


13mosersinks.com

MOSER


• Max RPM 6000• May be used on granite, marble, quartzite,

natural stone - wet or dry• Engineered stone, quartz stone - wet only

Weha 3 Step Triad Dry Polishing Pads Weha Triad 3 Step Dry Diamond Polish Pads are for granite, marble,

quartzite and all natural stone. The new triangular pattern allows for the maximum amount of diamond to be ceramic crystal coated. This offers the most utilized concentrated diamond possible. Also, this triangular design deflects and releases the maximum amount of heat keeping the ceramic bond 20-30% cooler than other desinged dry diamond polishing pads. The special backing are designed to be extremely durable, does not release the diamonds and offers amazing

flexibility.

Weha Spiral Brick Dry Polishing PadsWeha Spiral Brick dry polishing pads are premium diamond

concentration pads designed to be used both on the jobsite as well as in the shop. With more diamond content, these dry pads polish faster, last longer than standard dry

pads with a brilliant polish,

and still remain extremely flexible throughout the life of the pad. They will create the same high quality polish as 7 step wet pads.

• Super flexible • Up to 5000 RPM• Incredible polish

• May be used wet or dry • Premium quality

Part # DescriptionDPS450 Weha 4” Spiral Brick Dry Pad 50 gritDPS4100 Weha 4” Spiral Brick Dry Pad 100 gritDPS4200 Weha 4” Spiral Brick Dry Pad 200 gritDPS4400 Weha 4” Spiral Brick Dry Pad 400 gritDPS4800 Weha 4” Spiral Brick Dry Pad 800 gritDPS41500 Weha 4” Spiral Brick Dry Pad 1500 gritDPS43000 Weha 4” Spiral Brick Dry Pad 3000 gritDPS4SET Weha 4" Spiral Set of 7 50-3000 grit

Part # Description13371 Weha 4” Triad Polishing Pads Step 113372 Weha 4” Triad Polishing Pads Step 213373 Weha 4” Triad Polishing Pads Step 3

Part # DescriptionD5S41 Weha 4" 5 Step Dry Diamond Polishing Pad Step 1D5S42 Weha 4" 5 Step Dry Diamond Polishing Pad Step 2D5S43 Weha 4" 5 Step Dry Diamond Polishing Pad Step 3D5S44 Weha 4" 5 Step Dry Diamond Polishing Pad Step 4D5S45 Weha 4" 5 Step Dry Diamond Polishing Pad Step 5D5S4SET Weha 4" 5 Step Dry Diamond Polishing Pad Set of 5

Weha 4" 5 Step Dry Diamond Polishing PadsWeha 5-Step Dry Diamond Polishing pads are for polishing granite, marble, concrete and all natural stones. Made from the latest multi-diamond matrix bond technology. Only 5 diamond polishing pads are needed to create the best dry polish.



Weha Xubi Honeycomb - Dry Pads - Gloss FinishWeha 4” Xubi Dry Diamond Polishing Pads are super flexible dry diamond polishing pads for granite, marble, quartzite and any other natural stone. The high diamond content and super flexible c l o t h back make the Xubi one of the best granite dry diamond polishing pads for the price. Because these dry diamond polishing pads are so flexible, it makes them ideal for bowls and radius polishing.The life of the Xubi Dry Diamond Polishing Pads will be comparable to dry polishing pads that cost much more than these Xubi Granite dry diamond pads. And, of coarse, the high gloss polish achieved with the Xubi Honey Comb Dry diamond Polishing Pads will rival any granite dry pad on the market. Used wet or dry Max RPM 5,000 RPM

Part # Description40450 4” Xubi Honeycomb Dry Polishing Pad 50 grit

40451 4” Xubi Honeycomb Dry Polishing Pad 100 grit






40457 4" Xubi Honeycomb Dry Polishing Pads Set of 7

Part # Description50408 4“ Matrix Dry Polishing Pad 50 grit

50409 4“ Matrix Dry Polishing Pad 100 grit


50411 4“ Matrix Dry Polishing Pad 400 gritt




504 4" Matrix Dry Polishing Pad Set of 7

Weha Matrix 7 Step - Dry- Matte FinishThe Weha Matrix Matte finish dry pads were made to be aggressive and polish right out of the gate. These quality dry pads will create a perfect polish on granite, marble, quartzite, and other natural stone. They also can be used wet on all these materials as well as engineered stone. Once you put the Matrix Matte Dry pads in your hands you will feel the quality and see just how much diamond has been put into these pads. You will also notice how the lower grits of thee Matrix Matt pads are domed instead of flat, allowing extra life on these lower grits.


mosersinks.com

MOSER



Weha Copper Diamond Polishing Pads - Wet/DryWeha Copper Diamond Hand Pads are also full bond copper diamond hand pads that can be used wet and dry.They life of these Copper Han Pads are 3 times the life of standard diamond hand pads. And because of the copper bond, they remove stock and shape much faster than standard electroplated pads. Use the Copper Diamond Hand Pads in grits 50,100,200 to create the bullnose, remove stock, and start the polishing process. Then switch over to

the 400 standard diamond hand pads. They will seamlessly switch over to finish the polish.

Weha Diamond Hand Polishing Pads - Wet/DryWeha Diamond Hand Polishing Pads work with granite, marble, Travertine, Limestone, ceramic, concrete. Weha Diamond Polishing Hand Pads are preferred to be used wet,even with with just a little water. Weha Diamond hand polishing pads are excellent for polishing up edges of material that has been profiled. The 30 and 60 Grit Diamond Hand Pads are aggressive enough to create round overs and light shaping of stone. Weha Diamond Hand Polishing Pads will remove router bit scratches and saw marks. Grits 30-400 are Diamond Electroplated Hand Polishing Pads. These shape and polish at a much faster rate. These can be used wet or dry. Grits 800-Buff are resin bonded diamond hand polishing pads that are designed to bring the stone or concrete up to a high gloss polish. These work very well when used with even a little water. The Weha Diamond Hand Polishing Pads come with a flexible foam backing that allows the pads to be used straight as well as be formed to the profiled edge that you are working with. Weha Diamond Hand Polishing Pads are 2" wide x 3 1/2" long for a firm grip for polishing.For more aggressive lower grit diamonds that create faster work and last longer try the Weha Copper Diamond Hand Polishing Pads.

• Wet or Dry• Hand pads 2”x3.5”

• Wet or Dry• 2”x3.5”

Part # Description15400 Weha 4” Copper Diamond Polishing Pad 30 Grit15401 Weha 4” Copper Diamond Polishing Pad 50 Grit15402 Weha 4” Copper Diamond Polishing Pad 100 Grit15403 Weha 4” Copper Diamond Polishing Pad 200 Grit13715 Weha Copper Diamond Hand Polishing Pad 50 Grit13716 Weha Copper Diamond Hand Polishing Pad 100 Grit13717 Weha Copper Diamond Hand Polishing Pad 200 Grit

Part # Description13700 Weha Diamond Hand Polishing Pad 30 Grit13701 Weha Diamond Hand Polishing Pad 60 Grit13702 Weha Diamond Hand Polishing Pad 100 Grit13703 Weha Diamond Hand Polishing Pad 200 Grit13704 Weha Diamond Hand Polishing Pad 400 Grit13705 Weha Diamond Hand Polishing Pad 800 Grit13706 Weha Diamond Hand Polishing Pad 1500 Grit13707 Weha Diamond Hand Polishing Pad 3000 Grit13708 Weha Diamond Hand Polishing Pad 7000 Grit13709 Weha Diamond Hand Polishing Pad Buff Black13710 Weha Diamond Hand Polishing Pad Buff White


15mosersinks.com

MOSER


Weha Copper Diamond Polishing Pads - Wet/DryWeha Copper Diamond Hand Pads are also full bond copper diamond hand pads that can be used wet and dry.They life of these Copper Han Pads are 3 times the life of standard diamond hand pads. And because of the copper bond, they remove stock and shape much faster than standard electroplated pads. Use the Copper Diamond Hand Pads in grits 50,100,200 to create the bullnose, remove stock, and start the polishing process. Then switch over to

the 400 standard diamond hand pads. They will seamlessly switch over to finish the polish.

Weha Diamond Hand Polishing Pads - Wet/DryWeha Diamond Hand Polishing Pads work with granite, marble, Travertine, Limestone, ceramic, concrete. Weha Diamond Polishing Hand Pads are preferred to be used wet,even with with just a little water. Weha Diamond hand polishing pads are excellent for polishing up edges of material that has been profiled. The 30 and 60 Grit Diamond Hand Pads are aggressive enough to create round overs and light shaping of stone. Weha Diamond Hand Polishing Pads will remove router bit scratches and saw marks. Grits 30-400 are Diamond Electroplated Hand Polishing Pads. These shape and polish at a much faster rate. These can be used wet or dry. Grits 800-Buff are resin bonded diamond hand polishing pads that are designed to bring the stone or concrete up to a high gloss polish. These work very well when used with even a little water. The Weha Diamond Hand Polishing Pads come with a flexible foam backing that allows the pads to be used straight as well as be formed to the profiled edge that you are working with. Weha Diamond Hand Polishing Pads are 2" wide x 3 1/2" long for a firm grip for polishing.For more aggressive lower grit diamonds that create faster work and last longer try the Weha Copper Diamond Hand Polishing Pads.

• Wet or Dry• Hand pads 2”x3.5”

• Wet or Dry• 2”x3.5”

Part # Description15400 Weha 4” Copper Diamond Polishing Pad 30 Grit15401 Weha 4” Copper Diamond Polishing Pad 50 Grit15402 Weha 4” Copper Diamond Polishing Pad 100 Grit15403 Weha 4” Copper Diamond Polishing Pad 200 Grit13715 Weha Copper Diamond Hand Polishing Pad 50 Grit13716 Weha Copper Diamond Hand Polishing Pad 100 Grit13717 Weha Copper Diamond Hand Polishing Pad 200 Grit

Part # Description13700 Weha Diamond Hand Polishing Pad 30 Grit13701 Weha Diamond Hand Polishing Pad 60 Grit13702 Weha Diamond Hand Polishing Pad 100 Grit13703 Weha Diamond Hand Polishing Pad 200 Grit13704 Weha Diamond Hand Polishing Pad 400 Grit13705 Weha Diamond Hand Polishing Pad 800 Grit13706 Weha Diamond Hand Polishing Pad 1500 Grit13707 Weha Diamond Hand Polishing Pad 3000 Grit13708 Weha Diamond Hand Polishing Pad 7000 Grit13709 Weha Diamond Hand Polishing Pad Buff Black13710 Weha Diamond Hand Polishing Pad Buff White



Part # Description30172 4” Xubi Resin Filled Diamond Cupwheel Fine

30171 4” Xubi Resin Filled Diamond Cupwheel Medium

30170 4” Xubi Resin Filled Diamond Cupwheel Coarse

Weha Xubi 4” Resin Filled Diamond Cup WheelXubi 4” Resin Filled cup wheels are perfect for chip free grinding and honing. Diamonds are specifically placed on the cup wheel for maximum speed. Resin is filled to eliminate bouncing or “biting” into the material-the things that cause chipping. 5/8-11 Thread. May be used wet.

Part # Description50250 4”x5/8”-11 Weha Rubber Diamond Cupwheel - Coarse

50251 4”x5/8”-11 Weha Rubber Diamond Cupwheel - Medium

50255 5”x5/8”-11 Weha Rubber Diamond Cupwheel - Coarse

50256 5”x5/8”-11 Weha Rubber Diamond Cupwheel - Medium

Part # Description50270 4”x5/8”-11 Weha WX2 Diamond Cupwheel50271 4.5”x5/8”-11 Weha WX2 Diamond Cupwheel50272 5”x5/8”-11 Weha WX2 Diamond Cupwheel

• Rubber backed• Vibration free • Super Smooth

• Rodding• Comes with Quad adapter

• Cutting• Grinding

• Easier on the grinder• Less user fatigue

Weha WX2 Cupwheel/Blade/Rodding Blade The Weha WX2 Multi Blade/Cupwheel is an extremely versatile tool for both the shop and the job site. The WX2 can be used as a diamond cupwheel for aggressive, yet smooth finish grinding. It can be used as a traditional diamond impregnated diamond blade for cutting with a grinder. And with a thickness of 3/16” it can also be used as a rodding blade! Made with premium quality diamonds, the WX2 can be a one stop blade for multiple uses in the shop and on the jobsite. Comes with the quad adapter. Can be used wet or dry. Max 10,000 rpm.

Weha Rubber Diamond CupwheelThe Weha Rubber Diamond Cupwheel is the ultimately the smoothest running cupwheel produced. The Rubber cupwheel has traditional diamond segments. But with a specially designed rubber that separates the diamonds from the aluminum thread, it completely absorbs all vibration from the tool and the stone. Can be used wet or dry. Max 10,000 rpm.

Cupwheels, Core Bits, Finger Bits, Zero ToleranceCupwheels, Core Bits, Finger Bits, Zero Tolerance

mosersinks.com

MOSER

16


Part # Description7680 4”x5/8”-11 Resin Filled Cupwheel-Course7681 4”x5/8”-11 Resin Filled Cupwheel-Medium7682 4”x5/8”-11 Resin Filled Cupwheel-Fine

• Perfectly balanced• 5/8-11 thread

• Resin Filled• Chip-free finish

Weha Resin CupwheelsResin Filled cup wheels are perfect for chip free grinding and

honing. Diamonds are specifically placed on the cup wheel for maximum speed. Resin is filled to eliminate bouncing, or "biting"

into the material-the things that cause chipping.

Weha Aluminum Cupwheel• Turbo style for fast stock removal• 5/8-11 thread• Light weight aluminum back• Perfectly balanced

• 3 grits available from stock removal to honing

• Water displacement for effective wet use

• May be used WET or DRY

• High quality for granite & marble• Contour shape allows inside radius grinding• Smooth, chip free results• 5/8-11 thread• Super light weight cupwheel• May be used WET or DRY

Part # DescriptionVZ050201 4”x5/8” Aluminum Cupwheel - Coarse

VZ050202 4”x5/8” Aluminum Cupwheel - Medium

VZ050203 4”x5/8” Aluminum Cupwheel - Fine

Part # Description30230 Weha 4” Vac Brazed Flat Diamond Cupwheel - Coarse

30232 Weha 4.5” Vac Brazed Flat Diamond Cupwheel - Coarse

30234 Weha 5” Vac Brazed Flat Diamond Cupwheel - Coarse

Part # DescriptionVZ050272 4”x5/8”-11 Vac Brazed Contour Cupwheel

VZ050273 4.5”x5/8”-11 Vac Brazed Contour Cupwheel

Weha Vacuum Brazed Contour Cupwheel

Weha Vacuum Brazed Flat Cupwheel


17mosersinks.com

MOSER


Part# Description20152 1/2"x4"x1/2" Gas Thread CNC Core Bit20153 3/4"x4"x1/2" Gas Thread CNC Core Bit20154 1"x4"x1/2" Gas Thread CNC Core Bit20155 1 1/4”x4”x1/2” Gas Thread CNC Core Bit20156 1 3/8”x4”x1/2” Gas Thread CNC Core Bit20157 1 1/2”x4”x1/2” Gas Thread CNC Core Bit20158 1 3/4”x4”x1/2” Gas Thread CNC Core Bit20159 2”x4”x1/2” Gas Thread CNC Core Bit

20160 3”x4”x1/2” Gas Thread CNC Core Bit

Part# Description40138 Weha CNC Core Bit 35mm

Part # Description70135 3/4x4”x5/8-11 Thin Wall Core Bit-Wet70136 1”x4”x5/8-11 Thin Wall Core Bit-Wet70137 1 1/4”x4”x5/8-11 Thin Wall Core Bit-Wet70138 1 3/8”x4”x5/8-11 Thin Wall Core Bit-Wet70139 1 1/2”x4”x5/8-11 Thin Wall Core Bit-Wet70140 1 3/4"x4"x5/8-11 Thin Wall Core Bit-Wet70142 2”x4”x5/8-11 Thin Wall Core Bit-Wet70145 2 1/2”x4”x5/8-11 Thin Wall Core Bit-Wet70146 3”x4”x5/8-11 Thin Wall Core Bit-Wet70148 4”x4”x5/8-11 Thin Wall Core Bit-Wet

Part # Description20120 1/4” Non Core bit 5/8-11 Thread20121 3/8” Core Bit 5/8-11 Thread20122 1/2” Core Bit 5/8-11 Thread

Part # Description4520 Weha Water Ring 1 1/2”4521 Weha Water Ring 3”

Weha 1/2 Gas CNC Thin Wall Core Bits - Wet Use OnlyFor granite, marble, ES, Dekton, Ceramic, Quartzite. Weha 1/2 Gas CNC Thin Wall Core bits are designed specifically to give unparalleled life, speed, and zero blow out on CNC machines. Thin wall for fast, consistent drilling, the Weha 1/2" Diamond CNC Core Bits will core through granite, marble,

engineered stone very fast and clean.

Weha Matrix Thin Wall Core Bit - Wet Use Only

Weha Thin Wall Core Bits are designed for shop use. Thinner than standard core bits, the Weha Thin Wall will

drill fast with less pressure. Excellent life! Wet use only.

Weha CNC Core Bit 35mm

Weha Water RingsWeha Water rings are designed to create a

vacuum to the stone to hold water while drilling

holes on the job site.

Weha Non Core BitsWeha small diameter core bits are

excellent for anchor bolts, screws, brackets, etc.


mosersinks.com

MOSER

18Visit www.WehaUSA.com to see all our products, videos & technical information or call: 1.877.315.4761 • email: [email protected] your preferred Weha distributor for pricing and ordering 17

Weha CNC Core Bit 35mm

Part # Description20136 1”x4”x5/8-11 High Speed Dry Core Bit-Dry20137 1 1/4”x4”x5/8-11 High Speed Core Bit-Dry20138 1 3/8”x4”x5/8-11 High Speed Core Bit-Dry20139 1 1/2”x4”x5/8-11 High Speed Core Bit-Dry20140 1 3/4”x4”x5/8-11 High Speed Core Bit-Dry20141 2”x 4”x 5/8-11 High Speed Core Bit-Dry

Part# DescriptionPCD6 Weha 1/4" 6mm Ceramic Porcelain Core Drill BitPCD10 Weha 3/8" 10mm Ceramic Porcelain Core Drill BitPCD12 Weha 1/2" 12mm Ceramic Porcelain Core Drill BitPCD20 Weha 3/8" 20mm Ceramic Porcelain Core Drill BitPCD28 Weha 1" 28mm Ceramic Porcelain Core Drill BitPCD35 Weha 1 3/8" 35mm Ceramic Porcelain Core Drill BitPCD38 Weha 1 1/2" 38mm Ceramic Porcelain Core Drill BitPCD50 Weha 2" 50mm Ceramic Porcelain Core Drill BitPCD65 Weha 2 1/2" 65mm Ceramic Porcelain Core Drill BitPCD75 Weha 3" 75mm Ceramic Porcelain Core Drill BitPCD100 Weha 4" 100mm Ceramic Porcelain Core Drill BitPCD120 Weha 4 3/4" 120mm Ceramic Porcelain Core Drill Bit

Weha Ceramic Porcelain Drill BitsWeha Porcelain and Ceramic Core Drill Bits have been designed and built for all types of ceramic and porcelain materials. But especially for the thicker ceramic and porcelain slabs such as Lapitec and Cosentino Dekton slabs. This special bond of ceramic core bit allows a very quick "bite" into the ceramic or porcelain without walking. The drilling speed of the Weha Porcelain and Ceramic Core Drill Bits is outstanding. Not only will these core drills work on porcelain and ceramic, they also perform incredibly well in granite, marble, quartzite, engineered stone as well.

Weha Blitz High Speed Dry Core BitsWeha 1 1/2" High Speed Diamond Core bit for granite, marble, quartzite, quarts, engineered stone, concrete counter tops, and all natural stone. With diamonds both inside and outside the barrel to reduce drag, heat, and friction, along with high diamond content segments, the Weha dry diamond core bits will drill holes in 3cm granite in less than 30 seconds. The Weha High Speed Diamond Core Bits are built to be the best dry diamond core bit for granite and engineered

stone counter top faucet hole drilling.But they can also be used wet with Air Polishers in shop applications.

Weha Xubi Dry Diamond Core BitsWeha Xubi Dry Diamond Core Bit is an outstanding high speed core bit for granite, engineered stone, quartz, and concrete counter top materials. With a high diamond

concentration of diamonds, the Weha Xubi Granite Core Bits will reach between 70-85 holes per core bit. Featuring vacuum brazed diamonds on both the inside and the outside of the core, the Xubi Granite Dry Core Bit will not only drill fast but will leave the core very smooth and clean for the faucets to easily slide in to.

Part # Description30159 1" Xubi Dry Diamond Core Bit

30160 1 1/4” Xubi Dry Diamond Core Bit



30164 2” Xubi Dry Diamond Core Bit

BestSeller!


19mosersinks.com

MOSER


• Dry use• May be used wet• Recommended RPM:

3000-11000• 5/8x11 thread

Weha Resin Filled Zero Tolerance WheelsWeha Diamond Zero Tolerance Drums are Premium quality zero tolerance wheels that perform with the best brand names in the industry. Each individual Zero Tolerance Wheel is perfectly balanced to make sure runs true with no bouncing. As an aggressive stock removal tool, the Weha Resin Filled Zero Tolerance Wheel is designed to rapidly remove stock to get the counter top to the exact line needed for polishing or shaping. May be used wet or dry.

Radial Arm Finger TipWeha Radial Arm Finger Tip is a high performing diamond tip for cutting out bowls with radial arm machines. With fast cutting speed, the Weha Finger Tip will cut up to 15 bowls while leaving the bowl ready for polishing pad use.

• Perfectly balanced• Aggressive stock removal• Smooth finish • Long life

• Center water feed holes• Virtually chip free stock removal

diamond technology• Much safer than using the 4 x 2

carbide stones• May be used wet or dry.

• Bearing on top that may be used with templates for exact stock removal.

• Bearing may be removed if necessary

• Max RPM: 4000

• 20mm x 20mm x 14mm thread• Designed for radial arm machines• Cutting bowls• Used with a 1/2 gas adapter

• Resin filled• Center water

feed• Wet or dry use• 10,000 rpm

Part# Description30215 Weha 2”x2” 5/8”-11 thread Vac Brazed Zero Tolerance Wheel Top Bearing

30216 Weha 3”x2” 5/8”-11 thread Vac Brazed Zero Tolerance Wheel Top Bearing

30198 Weha 1"x2" Vac Brazed Zero Tolerance Wheel Coarse - No Bearing



Part # Description30210 1”x1 1/2” 5/8”-11 thread Zero Tolerance Wheel Coarse30211 2”x1 1/2” 5/8”-11 thread Zero Tolerance Wheel Coarse30211M 2”x1 1/2” 5/8”-11 thread Zero Tolerance Wheel Medium30212 3”x1 1/2” 5/8”-11 thread Zero Tolerance Wheel Coarse30212M 3”x1 1/2” 5/8”-11 thread Zero Tolerance Wheel Medium

Weha Vacuum Brazed Zero Tolerance Wheels

Part # Description30515 Radial Arm Finger Tip30520 1/2 Gas x 14mm Thread Adapter for Radial Arm Finger Tip


mosersinks.com

MOSER

20


Flexible Back Up Pad

Super Flex Back Up Pad

Snail Lock Back Up Pad Yellow Foam Back Up Pad

4" Midflex Velcro Back Up Pad

Rigid Back Up Pad

Aluminum Back Up Pad

Part # DescriptionVZ051040 4”x5/8” Brass Snail Lock Back Up Pad

VZ051041 5”x5/8” Brass Snail Lock Back Up Pad

Part # DescriptionVZ051040 4”x5/8” Brass Snail Lock Back Up Pad

VZ051041 5”x5/8” Brass Snail Lock Back Up Pad

Part # Description4440 4”x5/8” Thick Yellow Foam Velcro Back Up Pad

4441 5”x5/8” Thick Yellow Foam Velcro Back Up Pad

Part # DescriptionVZ051050 4” Midflex Back Up Pad

Part # DescriptionVZ051049 3”x5/8”-11 Rigid Back Up Pad

VZ051046 4”x5/8”-11 Rigid Back Up Pad

VZ051052 5”x5/8”-11 Rigid Back Up Pad

Part # Description51078 4”x5/8”-11 Aluminum Back Up Pad

51079 5”x5/8”-11 Aluminum Back Up Pad

Part # DescriptionVZ051042 4” Snail Lock Velcro Back Up Pad

VZ051043 5” Snail Lock Velcro Back Up Pad

Part # DescriptionVZ051035 3" Super Flex Back Up Pad

VZ051036 4" Super Flex Back Up Pad

VZ051037 5" Super Flex Back Up Pad

Part # DescriptionVZ051048 3”x5/8”-11 Flexible Back Up Pad

VZ051045 4”x5/8”-11 Flexible Back Up Pad

VZ051051 5”x5/8”-11 Flexible Back Up Pad

Weha Snail Lock Velcro Back Up

Back Up Pads BACK UP PADS

21mosersinks.com

MOSER


Part # Description50290 Weha Frankfurt Button Diamond Shoe

• CNC machines with a cnc plate• Radial Arm Machines

• Floor machines with a frankfurt plate• Wet use only

• Granite• Engineered stone

• No burn• Long life

Weha Frankfurt Button Diamond ShoeThe newest technology in radial arm and CNC stock removal and honing. The Weha Frankfurt Button Diamond Shoes will remove a polish incredibly fast. But most importantly, it will create a perfectly even 80/100 grit honed finish leaving the stone ready for bringing the polish back up or starting the Antique, Leather finish with the brushes.

Part # Description13550 4" Weha 5 Step C Frame Graphite Metal Diamond POS 113551 4" Weha 5 Step C Frame Graphite Metal Diamond POS 213552 4" Weha 5 Step C Frame Diamond Copper Resin Polishing Pad POS 313553 4" Weha 5 Step C Frame Diamond Resin Polishing Pad POS 413554 4" Weha 5 Step C Frame Diamond Resin Polishing Pad POS 513555 4" Weha 5 Step C Frame Diamond Resin Polishing Pad POS 5

5 Step System for Granite, Marble, Engineered Stone & QuartziteWeha 5 Step Graphite snail lock POS 1 & 2 diamond wheel are made with premium quality metal designed to work on on "C" frame machines such as the Park Pro edge. Provides aggressively fast cutting with excellent life.Weha 5 Step POS 3 is the very important Copper Resin rigid transition pad to go from the metals to the polishing pads to work on "C" frame machines. This step is recommended only for the darker or more dense stones. The 5 step C Frame POS 3 is very rigid and will remove all lines from the Pos 2 graphite wheel.Weha 5 Step POS 4 Resin Diamond Polishing Pad for C Frame can be used right after the snail lock graphite POS 2 metal diamond to start the polishing process. On very dark or dense materials, we recommend using the 5 step POS 3 copper resin pad. However, on standard granites and engineered stone simply go from Position 2 to position 4,5,6 to achieve a perfect polish.Weha 5 Step POS 5 & POS 6 Resin Diamond Polishing Pad for C Frame can be used right after the snail lock graphite POS 2 metal diamond to start the polishing process.Weha 5 Step POS 6 Resin Diamond Polishing Pad for C Frame can be used right after the snail lock graphite POS 2 metal diamond to start the polishing process. The Bond of the Weha 5 Step pos 6 C frame diamond polishing pad is made to work with the Park Pro Edge, Denver, and other Automated C Frame profile and polishing machines.

Weha Turbo Back Up

Part # Description51080 3.5”x5/8”-11 Turbo Back Up

Frankfurt VelcroBack Up Pad

Part # Description5006984 Frankfurt Velcro Back Up Pad

Back Up Pads Back Up PadsBACK UP PADS

mosersinks.com

MOSER


Part # DescriptionVD050917 Weha 22mm x 45mm Vacuum Brazed CNC Finger Bit

Part # Description51050 Weha Matrix 22mm x 35mm x 7 Seg x 1/2 Gas CNC High Speed Finger Bit51054 Weha Matrix 22mm x 40mm x 7 Seg x 1/2 Gas CNC High Speed Finger Bit51055 Weha Matrix 22mm x 50mm x 7 Seg x 1/2 Gas CNC High Speed Finger Bit

Part # Description133915 Weha 22mm x 40mm x 8 Seg CNC Finger Bit White

Part # DescriptionC5002835 Weha 20mm x 40mm x 8 Seg Red Top Racer

Weha Vacuum Brazed CNC Finger BitWeha Marble CNC Finger Bit is incorporating worldwide patented NEW Vacuum Brazing Technology to create a marble CNC finger bit that will drastically outlast any other finger bit on the market, guaranteed! The new Weha Patented Vacuum Brazed Technology does not destroy the diamonds during the vacuum brazing process, allowing much longer life of the diamonds. Extremely fast, aggressive cut.

Weha Matrix Diamond High Speed Finger BitThe Weha Matrix CNC High Speed Finger Bits are a true CNC Diamond Finger Bit powerhouse! The Weha Matrix CNC Finger Bit allows optimum performance, speed, and finish from the CNC machine. The 7 segment slanted/swirl design of the Weha Matrix High Speed CNC Finger Bit ensures 100% constant contact with the stone and its cutting. The Weha Matrix Diamond Finger Bit will provide up to 600 liner feet of performance. Designed for all granites, engineered stones, and quartz materials.

Weha Top Racer CNC High Speed Finger BitThe Weha Top Racer diamond cnc high speed finger bit is a premium high speed diamond cnc finger bits for high speed production. The Weha Top Racer High Speed Finger Bit is unbelievable on granite, marble, and especially engineered stone, quartz materialsThe Faster you run the Top Racer, the better it performs!

Weha White Top Sprinter Finger BitThe Weha Top Sprinter is a modified 8 segment cnc fingerbit for granite, marble, engineered stone. The Top Sprinters sweet spot is between 12"-20" per minute between 5,000-5800 rpm, depending on the stone being used. The life will be excellent, the wear will be even, and the bit will provide an all around well performing finger bit on practically all stone that is run through the cnc.

• Feed rate: 12'-20" per minute• RPM: 5000-5800

• Feed Rate: 24" - 36" per minute• RPM: 5500-8500

• Feed Rate: 24" - 48" per minute• RPM: 6000-7000• Drastically longer lifte



• Outstanding on all marbles, limestones, travertines and soft stones.

• 8 segments• 20mm x 40 mm dimensions

• 8 segments (4 double segments)• 40mm x 20mm x 8 segment

CNC Finger BitsCNC Finger Bits

23mosersinks.com

MOSER


Weha QB9 Rear Exhaust Air PolisherLight, convenient-sized and powerful wet grinder for continuous operation. Handle surface rubber-coated. Excellent use in connection with diamond resin abrasives. With air returning

• Rear exhaust muffler• Reversable side handle• Spindle-thread: 5/8-11”• Air required: 16 CFM @ 90 psi

• Weight: 3.5 lbs• Front handle T-Grip• Center water feed• Max speed: 4000 rpm

Part # Description7270001 Weha QB9 Rear Exhaust Air Polisher

Comes with a wrench, T-Grip handle,

clip on water and dust shield.

Weha Speedy Water Fed Air Polisher

Part # Description7270012 Weha Speedy Water Fed Air Polisher

Part # Description7264116 Weha Stone Chisel

Weha Stone ChiselFully automatic production of chiseled edges by breaking the slab edge. Faster processing in comparison with the traditional method. Improved ergonomic construction. Adjustable tool according to the slab thickness.

• Slab Thickness: Up to 1 5/8"• Length: 14"• Width: 11"• Height: 115"• Air Pressure: 120 PSI• Air Req. per Stroke: 4 CFM• Weight: 32 lbs

• 5/8-11 Thread • Max. Speed: 4500 rpm• Weight: 2.6 lbs• Air Consumption: 16 CFM

@ 90 psi

• Air Inlet: 1/4"• Side exhaust• Center water feed• Comes with wrench, side handle,

water guard, air hose, water hose

Air Tools & Hand ToolsAir Tools and Hand Tools

mosersinks.com

MOSER

24


Weha 25" Counter Top Work TableWeha Granite Fabrication Work Table has all the functions necessary for finishing granite, marble, quartz, counter tops in granite, marble, Quartz, Quartzite, Engineered Stone, Dekton, Lapitec, and other ceramic and porcelain centered stone materials. The 2" wide fabrication work table has 4 locking swivel wheels for easy maneuvering in the shop. At 78" long, the Weha granite work table can easily support full length counter tops, allowing work to be done on 3 sides at any given time. The inside support rails have an opening of 22" x 33" in the middle of the fabrication work table. This opening allows full cutting and polishing of sink bowls and vanities. Painted with safety yellow powder coated paint, this fabrication work table will last for years.

Weha 20" Counter Top Work TableWhat makes this table so great is the width at only 20". This width is perfect for building up and laminating mitered edges. At 20", the Weha Lamination work table allows the counter top to be centered and both sides of the counter top have about 3" hanging off. This gives the opportunity to fabricate both sides of the counter top without ever having to move the top. The 20" wide fabrication work table has 4 locking swivel wheels for easy maneuvering in the shop. The inside support rails have an opening of 16.75" x 20" in the middle of the fabrication work table.

Weha Stone Fabrication Shop Cart

• Load Capacity: 882 lbs• Length: 78”• Total Width: 25”• Total Height: 39”

• Load Capacity: 882 lbs• Length: 78”• Total Width: 20”• Total Height: 39”

• 2 fixed and 2 swivel casters with locks

• 33" Center for bowl cutting and polishing

• 2 fixed and 2 swivel casters with locks

• 33" Center for bowl cutting and polishing

• Load Capacity: 2000 lbs• Length: 49”• Depth: 23”• Height: 48”• Surface Deck: 12" x 44"• 2 fixed and 2 swivel rubber wheels

Are you using a drywall cart or a Stone Fabrication Shop Cart?• Transport cut and finished pieces• Keep the counter top and matching backsplash together throughout the fabrication process• Comes complete with everything you need to transport, protect, and keep stone jobs

together.

Part # Description134945 Weha Counter Top Work Table 25"134946 Weha Counter Top Work Table 20"

Part # Description1901 Weha Stone FabricationShop Cart

available in20" & 25"

width

• Comes complete with:• Foam padding already installed• 70" wood backsplash shelf (ability to cut to

custom length)• Rubber base protection

Transport • Work Tables Transport • Work Tables

25mosersinks.com

MOSER


Weha Double Sided Transport A Frame Weha Double Sided Transport A Frame Carts are the world standard for Stone Material Handling Transport Equipment for granite and stone counter tops and islands. The Weha Double Sided Transport A Frame Cart is the safest way to get granite delivered to the job site.

The quality of the Weha Granite Transport Carts are unmatched. Other companies try to imitate the Weha Transport Carts but they simply cannot match the quality and longevity of the Weha Transport A Frame Carts.

Solid galvanized steel for years of use. Fully replaceable rubber. Redesigned with slots for optional wheels.

Weha Transport Carts are really in a league of their own!

Weha Shorty Double SidedA Frame Transport Cart

#8010487

Load Capacity: 4410 lbs (2205 lbs per side)Total Length: 78”Total Height: 42”Total Width: 32”Upright and Straps: 8 (4 per side)Load Height: 34”Width of Contact Surface: 11”Forklift Receivers on all sidesWheels sold separately



Weha Small Double SidedA Frame Transport Cart

#8010480

Weha Large Double SidedA Frame Transport Cart

#8010484

Caster Wheels for Weha Double Sided A Frame Transport Carts2 Fixed/2 Swivel • Part Number: 133275

Wheels soldSeparately

Made ofHot Dipped

Galvanized Steel!

Transport * Work TablesTransport • Work Tables

mosersinks.com

MOSER

26


Part # Description8010492 Weha Backsplash Attachment Set of 5

Weha Backsplash Attachment• Set of 5• Fits all Weha Transport Carts• Galvanized with rubber lining• Holds backsplashes for easy transport

• Holds suction cup assemblies, 2x4, and other installation tools

• Allows countertops on bottom of transport rack and backsplash on top

Part # DescriptionVD080188 Replacement Strap & Buckle

Replacement Products for the Weha Transport A-Frames

Weha Replacement Upright The replacement upright for the Weha Transport A-frames come complete with the galvinized pole, replacement strap and buckle, as well as brand new protective rubber.

Weha replacement strap and buckle for the A-frame transport cart uprights. • Comes with: Strap, Brass Hook & Metal Buckle

Weha Replacement RubberWeha replacement rubber for the Weha transport A-frames are super easy to ex-change. Simply pull out the used, worn rubber and snap the new rubber in place. Sold by the liner foot.

White Rubber

HOW MUCH RUBBERDO YOU NEED?

Weha Replacement Strap and Buckle

Part # Description8020609ft Replacement Rubber for A-Frames per foot - Black119464ft Replacement Rubber for A-Frames per foot - White

Part # Description8020730 Replacement Upright for Small A-frame 48” long upright8020731 Replacement Upright for Large A-frame 58 1/2” long upright

• Non-marking• Doesn’t leave spots/marks on stone• Excellent for engineered stone, composite

materials, marbles (especially white or light colored stone), all granites

• Galvanized pole• Replacement strap and buckle• New protective rubber• New brass hook

Replacement rubber is sold by the foot. Simply calculate the total

number of feet that needs to be replaced. Weha will ship you a continuous roll based upon the

number of feet you need. Then cut to specific length during installation.


27mosersinks.com

MOSER


Part # Description8010483 78" x 56"Single Sided A-Frame Cart

• Load Capacity: 2205 lbs• Length: 78“• Width: 26“• Load Height: 48“• Total Height: 56"

• Load Capacity: 2205 lbs• Length: 94“• Width: 25“• Load Height: 68"• Total Height: 71"

• Width of Contact Surface: 16“• Uprights: 4• Weight: 198 lbs• Forklift Receivers

• Width of Contact Surface: 16“• Uprights: 5• Weight: 220 lbs• Forklift Receivers

Weha Small 78" x 56" TallSingle Sided A Frame Cart

The Weha single-sided A frame is excellent for install vans, box trucks, as well as for in shop use and can easily be placed against walls for saving space. At only 26” wide, it allows plenty of room in vans and box trucks for additional install equipment. Made of European Hot Dipped Galvanized steel. Manufactured by Weha Germany. Comes with forklift receivers for easy moving. The base and uprights come with replaceable rubber to prevent scratches. Comes with 4 upright and tie down straps for secure transport.

Weha Large 94" x 81" Tall Single Sided A Frame CartThe Weha Large Singe Sided A-Frame is excellent for transporting finished countertops and islands in box vans.The back side can be placed flat against the walls, leaving plenty of room to load the vans as well as access tools throughout the truck. It is also excellent in the shop near bridge saws or cnc machines. It can be placed right against the wall and be used for storing scheduled jobs. It comes with: Forklift receivers. 5 Upright poles with straps for locking in and securing the stone during transport or for shop safety storage. All pieces that would come in contact with stone are lined with replacement rubber for protection agains damage and scratches.

Weha Large 94" x 71" Tall Single Sided A Frame CartThe Weha Large Singe Sided A-Frame is excellent for transporting finished countertops and islands in box vans.The back side can be placed flat against the walls, leaving plenty of room to load the vans as well as access tools throughout the truck. It is also excellent in the shop near bridge saws or cnc machines. It can be placed right against the wall and be used for storing scheduled jobs. It comes with: Forklift receivers. 5 Upright poles with straps for locking in and securing the stone during transport or for shop safety storage. All pieces that would come in contact with stone are lined with replacement rubber for protection agains damage and scratches.

Part # Description1333321 94" x 71" Single Sided A-Frame Cart

Part # Description800002 94" x 81" Single Sided A-Frame Cart

• Width of Contact Surface: 16“• Uprights: 5• Weight: 220 lbs• Forklift receivers

• Load Capacity: 2205 lbs• Length: 94”• Width: 25”• Load Height: 78”• Total Height: 81"

Made ofHot Dipped

Galvanized Steel!

Made ofHot Dipped

Galvanized Steel!

Made ofHot Dipped

Galvanized Steel!

Transport • Work TablesTransport • Work Tables

mosersinks.com

MOSER

28


Part # Description8010159 Weha Universal Stone Buggy

Part # DescriptionVD080391 Weha Pit Fabrication Stand - each

Weha Universal Stone Buggy

• Adjustable supports• Load Capacity: 1102 lbs• Total Width: 28”• Length: 55”• Total Height: 50””

• Load Height: 32”• Load Depth: 9”• Rubber lined base• Rubber lined uprights

Weha Pit Fabrication StandsThe Weha Pit Heavy Duty Fabrication Stands are applicable for many workshop jobs. By means of mechanical cranking the trestles can be invariably adjusted

to any desired working height. PVC-Covering protects the work piece. Collapsible supporting legs save space, when the PIT will be placed aside. Height adjustable legs permit an inclination of the loading surface. Adjustable foot pegs for leveling.

• Load Capacity: 1102 lbs each• Length: 32”• Total Width: 25”

• Adjustable Height: 31”-47”• Weight: 66 lbs each

2 pneumatic and 2 locking swivel casters for easy movement

Integrated storage of supports when not in use

Comes with 6 rubber lined steel tube stop supports.4 height adjustments

Use without supports for larger pieces

Weha Butler ClampFixing assistance for simple aligning of mitre edges! Perfect and inconspicuous Optics with the production of Facings (so called aprons) to achieve a 45 degree sticking together (mitre). Our Butler facilitates the setting-up

Part # Description8161261 Weha Butler Clamp/Set of 2

• Length: 8.4“• Width: 5.4“• Height: 12“• Weight: 4 lbs

• Max Clamping Range: 7.1“

• Max. Material Thickness: 1.6“


29mosersinks.com

MOSER


Part # Description8010406 Weha Carry Clamps Lifter - Set/2

Part # Description8010128 Weha Butterfly Slab Trolley

Part # Description8161281 Weha Slab Dolly 4 Wheel

Part # Description8010119 Weha Slab Dolly 2 Wheel

Weha Carry ClampsThe Weha Carry Clamps are designed for up to 4cm of material. Double handles for up to 4 people. The more weight that is lifted, the tighter the grip. Rubber pads prevent marks or damage to the stone. Comes as a set of 2. For hand use only.

• Opening Width: 0”-2”• Weight: 4.4 lbs each • Load Capacity: 176 lbs each

• Load Capacity: 1102 lbs each• Length: 22”• Clamp Width: 3/4”-6”

• Weight: 67 lbs • Pole Height: 35”• 2 Pneumatic Wheels 11” dia.

Weha Butterfly Slab TrolleyThe Weha Butterfly Slab Trolley is a self-locking spring-loaded clamp for easily moving material around the shop as well as installation. Its pneumatic wheels easily roll over shop debris. The 35” steering handle is offset to easily move large pieces. All surfaces are galvanized, and load-bearing surfaces are coated with rubber for scratch resistant use. With a load capacity of 1100 lbs it will carry most any job!

Weha 4 Wheel Slab DollyIncludes 2 wheels (8 in.), as well as 2 steering rollers for safe slab switching and turning. Carpet or Foam can easily be installed over it.

Weha 2 Wheel Slab DollyThe Weha Slab Dolly is an excellent shop and install dolly. Designed for transporting slabs, it is made of rigid U-profile steel with a wooden contact surface. With a weight capacity of 1102 lbs, along with pneumatic wheels, you can easily move slabs throughout the shop.

• Lined with wood • Hard wheels• Length: 39”

• Length: 20”• Width: 3”

• Weight: 198 lbs• Weight capacity: 1102 lbs

Extension Kit(Optional)

Transport • Work TablesTransport • Work Tables

mosersinks.com

MOSER

30


• Rail Length: 7’

• Rail Length: 7’• 12 - Double Cups

• Weight: 40 lbs

Weha Suction Assembly consists of 2 capped aluminum rails and 12 double suction cups. It supports and protects your kitchen and bathroom tops in transport, reducing the chance of breaking the top. Special aluminum profiles allow a safe placement of the suction cups, which are individually adjustable.

The Replacement Double Suction Cup for Suction Cup Assembly are designed specfically for the Weha Suction cup assembly. They have the hook and lever on the underside of the handle to clamp onto the special grooves in the rail of the Suction cup assembly so that they don't come off.For standard double suction cups,please see Part# 8010423

The Weha 7' replacement bar for the Weha Suction Cup Assembly is to replace a damaged or lost bar that came with the Weha Suction Cup Assembly set.

By means of a special pin-up device it is possible to connect the suction cups in order to move the rail and the suction cup together, as a complete unity. Time-saving especially when the set has to be used often and fast. To remove the suction cups only need to lift the rail slightly from the work surface. Suction cups can be slid up and down the rail.

Weha Angle Suction Cup AssemblyThe folding rail allows the safe transport of angle slabs. Special construction rail for locking on angles of 30°, 45°, 90°, 180°.

Weha Replacement Parts for Suction Cup Assembly

Part # DescriptionSET080041 Weha Angle Suction Cup Assembly

Part # DescriptionSET080040 Weha Suction Assembly

Part # Description8010422 Weha Replacement Cup for Suction Cup Assembly8010414 Weha 7' Replacement Bar - Each

Weha Suction Assembly

Vacuum Cups & Lifters • Seam Setters • Suction Cup AssemblyVacuum Cups & Lifters • Seam Setters • Suction Cup Assembly

31mosersinks.com

MOSER


Weha Suction CupsThe Weha Double Suction Cups are excellent light weight cups that have a nice weight capacity for moving cut

and finished pieces of stone, tile, and glass

• Load Capacity: 176 lbs• Suction Plate: 5“• Weight: 1.4 lbs

Part # Description8010423 Weha Suction Cups

Part # Description122815 Weha 8” Metal White Rubber Vacuum Cup

Weha 8“ Metal White Rubber Vacuum CupT

• Load Capacity: 176 lbs • Non-marking• Does not leave spots/marks on stone• Excellent for ES stone, composite materials, marbles, all granites

(especially white or light colored stone

Part # DescriptionVZ080104 8” Plastic Handle Vacuum Cup8010421 8” Metal Vacuum Cup8010416 10” Metal Vacuum Cup

8” Plastic Handle Vacuum Cup

• Load capacity horizontal: 175 lbs

• Suction plate diameter: 8”• Weight: 2.5 lbs

10” Metal Vacuum Cup• Load capacity horizontal: 331 lbs• Suction plate diameter: 10”• Weight: 3 lbs

8” Metal Vacuum Cup• Load capacity horizontal:

265 lbs• Suction plate diameter: 8”• Weight: 3 lbs

Weha Vacuum CupsHeavy-duty and robust vacuum cups with high load capacity, especially for heavy and big work pieces with smooth surfaces. Vacuum control and safe work thanks to a warning marking.


mosersinks.com

MOSER


• Load Capacity: 882 lbs• Min. Height: 11“• Max. Height: 15“

• Claw Width: 0.79 - 3.15“• Claw Surface: 6 x 4“• Weight: 17.6 lbs

• Load Capacity: 1764 lbs• Min. Height: 11“• Max. Height: 15“

• Claw Width: 0.8 - 3“• Claw Surface: 16 x 4“• Weight: 46 lbs

Weha R400 Slab GrabVery manageable and light slab grab with small dimensions and galvanized surface. Jaws and other contact surfaces are completely rubber coated. A return spring keeps it in the vertical position. When the slab is being put down, a locking automatism (protected by law) substitutes the manual locking.

Weha R400 TwinVery manageable and light slab grab with small dimensions and galvanized surface. Especially suitable for fragile slabs. Jaws and other contact surfaces are completely rubber coated. A return spring keeps it in the vertical position. Locking automatism (protected by law) as R 400.

Lifter: 50• Load Capacity: 2646 lbs• Height: 14“• Claw Width: 0.6 - 2“• External Clamping Jaw: 0.9“• Weight: 44 lbs

Lifter: 75• Load Capacity: 2646 lbs• Height: 16“• Claw Width: 1.2-3“• External Clamping Jaw: 0.9“• Weight: 62 lbs

Part # Description8010223 Abaco 50 Lifter Little Giant8010221 Abaco 75 Lifter Little Giant

Part # Description8010202 Weha R400 Slab Grab

Part # Description8010204 Weha R400 Twin

Abaco Lifters Light and compact construction. Reinforced pressure plate for even safer handling. Ideal

for the easy extraction from tight piles of slabs.

Abaco Red Locking Latch Clip with Torsion Spring & Boltfor Abaco Slab Lifters

Part # Description601601 Abaco Red Latch Clip


33mosersinks.com

MOSER


Important: Carefully read the operating instructions. Do not use to lift waxed and frozen slabs.



Part # Description8010235 Weha Riba 18010240 Weha Riba 28010245 Weha Riba 3

Part # Description8020613 Green Replacement Pads for Lifters

Weha Riba 1Light and manageable slab grab for vertical transport of slabs.

Weha Riba Series Cable Scissor LiftersThe Weha Riba Series Cable Scissor Lifters are perfect for picking up any stone slab or steel plate from a horizontal position and lifting it to a vertical position. Likewise, the Riba Series Cable Scissor lifters will take a steel plate or slab and transition from a vertical position and lower it to a horizontal position.The Weha Riba Series Cable Scissor Lifters are operated by 2 super strong steel wire cables and roller bearings. So when lifting and tilting material the cable is always tight and creating pressure so that the Riba Scissor Lifter never releases the material. A cable guide guarantees slab lowering without a problem. The 2 cables have eye loops for eye hooks, clamps, shackles etc. Rubber coated jaws. The Riba Scissor Lifter can be used with Fork Lift Booms, Jib Cranes, Over Head cranes, etc. Fully hot dipped galvanized, the Riba Slab Lifters will last for many many years. Riba Scissor Slab Grab lifters come with 3" Diameter Rubber Grip Pads that create a super strong grip on the stone. These grips can easily be replaced when worn out.

Weha Riba 2Mid-heavy slab grab for vertical transport of slabs.

Weha Riba 3Heavy slab grab for vertical transport of slabs.

Weha Green Rubber Replacement Pads for Lifters

• Load Capacity: 3087 lbs• Min. Height: 20“• Claw Width: 0 - 11“• Weight: 64 lbs

• 3 3/8" diameter• 5/8" thick• 3/8" diameter hole for bolts




mosersinks.com

MOSER

34


Part # DescriptionVZ080041 Weha Red Boom

Weha Red Telescopic Forklift Boom

Weha Swivel Hook and ShackleSwivel hook for forklfit booms to attach lifters, cables, slings, etc. Safety push metal clip to prevent attachments from slipping or bouncing out. Grad 80 Equipped with Brass bushing SIKA-SWIVEL HOOK type WHS 10-8 Safety pin in top thread to prevent nut from backing out during use. Comes with shackle to attach to boom.

Swivel Hook for Fork Lift Booms and Lifter The Weha Swivel Hook is designed to lock into the Fork lift Boom and attach cables, Abaco Lifters, Scissor Lifters, Vacuum Lifters, to the Boom. The Weha Swivel Hook allows for rotation of Granite and Stone Slabs

Cable Connect Sling

Weha Adjustable Angle Telescopic BoomWe transfer your fork-lift truck into a mobile crane! With telescopic extensions, 4 times adjustable in height, suitable for loading work and transportation. Stabilizer. Completely hot galvanized. Universal, suitable for any fork-lift truck. New: more lifting possibilities through new hook positioning. A safety chain protects it from slipping off the fork.

• Load Capacity: 4000 lbs• Telescoping Length: 80” to 144”• Fork Pockets: 24” on centers• Usable Fork Pocket Height: 2 1/2”• Usable Fork Pocket Width: 7 1/2”• Finish: Painted Red

Hook Position• 144" - 1750 lbs• 132" - 2000 lbs• 120" - 2250 lbs• 108" - 2500 lbs• 96" - 2750 lbs• 84" - 3000 lb

• Max. load capacity: 5515 lbs• Max. reach: 15 ft• Weight: 551 lbs

• Weight capacity: 3.2 ton / 6400 lbs• Jaw Opening: 2"• Weight: 15 lbs

• Weight capacity: 3300 lbs

Part # Description8010608 Weha Adjustable Angle Telescopic Boom

Part # Description119791 Weha Swivel Hook and Shackle

Part # Description8010227 Cable Connect Sling

Part # Description8010226 Weha Swivel Hook for Fork Lift Booms & Lifters


35mosersinks.com

MOSER


• Simple, extremely fast changing of the vacuum-rubber seals• Universally applicable for polished and for rough upper surfaces!• Lower servicing costs and maintenance charges since the rubber

seals are sold separately• Increased safety

Part # Description116041 EP300 Unipad Handpump and Air Connection8010296 T300 Unipad Pneumatic/Air only

Part # Description8010323 EP600 Unipad Handpump and Air Connection115905 T600 Unipad Pneumatic Air only

Part # Description118674 EP800 Unipad Handpump and Air Connection118656 T800 Unipad Pneumatic/Air only

• Load Capacity Horizontal: 661 lbs• Load Capacity Vertical: 331 lbs• Suction Plate: 21.3“ x 6“• Weight: 33 lbs

• Load Capacity Horizontal: 1764 lbs• Load Capacity Vertical: 882 lbs• Suction Plate: 28“ x 12“• Weight: 73 lbs

• Load Capacity Horizontal: 1323 Lbs• Load Capacity Vertical: 661 Lbs• Suction Plate: 24“ X 10“• Weight: 40 Lbs

Weha EP300 UnipadHandpump & Air

Weha T300 UnipadPneumatic/Air Only





Unipad Vacuum Lifters

Silicone Vacuum Padsfor Engineered Stone

Type UNI-PADfor polished & rough

upper surfaces

Standard Vacuum Padsin wear resisting design

(steel core with vulcanizedsurface rubber)

mosersinks.com

MOSER

36


Weha Bison Slab Rack SetStout Galvanized Steel Square Tubing Uprights

60“ tall to reduce slab angle force

• New Angle set plate for correct slab placement• Internal steel reinforcement for extra stability & strength.• Set includes 2-10‘ bases and 16- 60“ uprights

• Premium grade European steel• Galvanized. No rust ever.• 2” x 2” square tubing uprights• 60” tall poles to reduce slab angle force

• Length: 5’• Holds up to 9,000lbs

between poles (4500 per pole)

Comes with:• 2 10‘ base rails• 16 2 x 4 x 6“ poles

• Hot galvanized surface• Pipes with PVC protecting caps.

Galvanized Steel - No Rust-Ever

Part # Description8010601 Weha Bison Slab Rack Set

Part # Description127435 Weha Brilo 5’ Interlocking Slab Storage Rack Set

Part # DescriptionSET080033 Weha Magnum Slab Rack

Weha Brilo 5‘ Interlocking Slab Storage Rack SetThe Weha Brilo 5 Foot Interlocking Slab Storage Rack Set is a continuous locking

full slab storage racking system for storing bundle and individual slabs. Each pole comes with a white rubber cap to prevent stone damage. With the angle brackets welded onto each pole, it becomes fool proof and sets the standard for slab storage safety. Base rails have male/female built in locking connectors. This allows a continuous storage with no space between sets. Internal steel reinforcement for extra stability and strength.Comes with: 2 5‘ long base beams 8- 60“ uprights with angle brackets.

Weha Magnum Slab RackSafe stacking of stone slabs, prevents from breakages and accidents. Easy taking of the slabs by means of a slab grab. Strong rails and pipes for high stability.

wrong

right1,

5 m

Storage Storage

37mosersinks.com

MOSER


Weha A-Frame Storage Rack (set of 2)The Weha A-Frame Storage rack with crossbar will hold up to 12,000 lbs per side. 60” long x 60” wide x 58” high with 6” spread on top of A to store full slabs.

Weha Heavy Duty Remnant RackThe Weha Heavy Duty Stone Remnant Rack is excellent for storing cut pieces, vanities, and remnants of all kinds. This isn't the standard light weight remnant rack that fabricators are used to seeing around. The Weha Heavy Duty Remnant Rack is stout, sturdy, and strong enough to store all thickness remnants. Each 36" post weighs almost 3 1/2 lbs each! This is Heavy duty steel.And the base is equally as strong to store entire row of remnants Weha heavy duty stone storage remnant racks are outstanding for granite, marble, engineered stone, travertine, Dekton, and all kinds of natural stone. The Weha Remnant Rack base rails are 60" long with 13 open holes per side for the poles.Painted with safety yellow powder coated paint for clear visibility during loading, unloading, and storage.

• Reinforced design, for stacking natural stone slabs on site

Remnant rack includes: • 2-60” base rails• 20-36” poles• Max. Load Capacity of 2300 lbs between posts• Weight per set: 140 lbs

• Length: 3‘• Width: 3‘

• 38" x 35" x48"

• Height: 2‘• Weight: 348 lbs

Weha Hinged Collapsable ContainerSimilar to Hinged Container but capable of being disassembled for space-saving and shipping costs.

Weha V Cart 2200 lb CapacityThe Weha V Cart is a versatile cart that can easily move and store granite, natural and engineered stones, as well as any sheet goods. The Weha V Cart comes with four swivel casters for easy moving The Weha V Cart has four removal rubber lined poles that can be removed and repositioned for easy loading and unloadingWith a weigh capacity of 2200lbs, the Weha V Cart can handle almost all functions in the shop

Pick up from toplever. Opens bottom.

Part # Description8010154 Weha Hinged Collapsable Container

Part # Description8161269 Weha V Cart 2200 lb Capacity

Part # Description134947 Weha Heavy Duty Remnant Rack

Part # Description8020684 Weha A-Frame Storage Rack/Set of 28020686 Cross Bar for Weha A-Frame

StorageStorage

mosersinks.com

MOSER

38


Part # Description125746 Weha Breakdown Blue Rodding Stand for Fiberglass Rodding

Part # DescriptionVZ080063 Weha Galvanized Rodding Stand

Weha Breakdown Blue Rodding Stand for Fiberglass Rodding

The Weha Breakdown Blue rodding stand will hold rodding up to 330‘ rolls. The real advantage of this Rodding stand over others is the ability for it to ship broken down for much less expensive shipping charges. With assembly only taking about 5 minutes, this will save well over $70.00 in shipping charges over rodding stands that are one solid piece. This makes this rodding stand the most affordable one on the market! Hold up to 1/2“ wide fiberglass rodding Stable, sturdy construction of painted steel. Comes complete with diagram, installation instructions, and all hardware

Weha Galvanized Rodding StandThe Weha Galvanized Granite Fiberglass Rodding Stand will hold rodding up to 330' rolls. This one piece design of the Weha Galvanized Fiberglass Rodding Stand is excellent for storing and spooling fiberglass rodding. The Weha Galvanized Fiberglass Rodding Stand holds up to 1/2" wide fiberglass rodding.Stable, sturdy construction of galvanized steel.




Part # Description8160066 Flat section 1/8” x 3/8” - Length: 100’8160065 Flat section 1/8” x 3/8” - Length: 300’

Fiberglass Rodding

Rodding Rodding

39mosersinks.com

MOSER


Part # Description8160061 Flat section: 1/8”x3/8” - Length: 328’126487 Flat section: 1/8”x1/4” - Length: 328’

Part # Description133229 Weha Steel Carbon Fiber Rodding 1/8" x 3/8" x 330'

25% Stronger than standard rodding

Patented CarbonReinforcement

The long sidesrun flat to fit in

to a tight cut

Patented CarbonReinforcement

The special shaping at each end offers increased

contact area for “bite” and stronger adhesion with the

glue

1/8” x 3/8” x 330” Roll

Stronger than whiterodding and steel

Carbon Fiber Advantage

Weha Carbon Fiber RoddingCarbon Fiberglass Rodding 1/8" x 3/8" x 328' roll for Granite, Marble, Engineered Stone,

Quartzite, all Natural StonesAt only $0.43 cents per foot, the Weha Carbon Fiberglass granite rodding is price competitive but unequaled in strength and bonding ability. Weha Carbon Fiber rodding is the latest technology in fiberglass rodding for granite, all natural stones, engineered stones, and quartz counter top applications Made with the highest concentration of fiberglass strands throughout the entire profile makes the weha carbon granite rodding, in itself, much stronger than traditional white fiberglass rodding for stone.Weha has added an additional top and bottom layer of high tensile strength Carbon on both sides to drastically increase the strength even more! This makes the Weha Carbon Fiber Rodding the Strongest granite Fiberglass Rodding that can be used.

Weha Steel Carbon Fiber RoddingSteel Carbon Fiber Rodding 1/8" x 3/8" x 330' for granite, marble, all natural stones, Engineered

stones and Quartz counter topsWeha has taken Steel Rodding and encapsulated it with 8 Strand premium true grade fiberglass and then reinforced with Carbon Fiberglass. By having the steel rodding completely enclosed in the carbon fiber, there is virtually no chance of rust from the steel, like traditional steel rodding. This Triple layer granite rodding material produces incredible strength superior to standard steel rodding, without the worry of rust. Additionally, the Weha Steel Carbon Fiberglass Rodding is specifically designed with Multiple groves that run the length of each side of the rodding. These adhesive groves are made to allow maximum locking bond and adhesion to the glue. This adds additional strength to the steel Carbon Fiberglass Rodding. Because the Weha Steel Carbon Fiberglass Rodding uses true premium grade fiberglass (not extruded plastic in the shape of rodding) the glue

bonds to the fiberglass. Weha Steel Carbon Fiberglass Rodding comes in a 330 ft roll that can fit the Weha Rodding Stand, as well as other manufacturers rodding stands. This will save a lot of shop space when compared to storing steel rodding in the shop.

RoddingRodding

mosersinks.com

MOSER

40


Misc./Accessories

Professional Marker Set

• 6 graphite mine , 6 red, 6 yellow, 2 pens

Part # Description4090160 Professional Marker Set4090155 Black Refill/Hardness HB/Pack of 54090156 Red Refill/Hardness HB/Pack of 54090157 Yellow Refill/Hardness HB/Pack of 5

Writes Through Standing Water

Part # Description33901 SKM White Metal Tip Stone Marker33903 SKM Red Metal Tip Stone Marker

SKM Metal Tip Stone MarkerSKM metal tip markers are perfect for marking slabs, core holes, sink cut outs, selecting slabs etc.Works on granite, marble, limestone, slate, all natural stone and engineered stone.

EZ Dish Washer BracketThe absolute best way to secure dish washers. Sturdy metal construction Attaches to the cabinet with screws. Can also be attached to countertop with adhesive. Sold as individual pieces. There are 25 pieces per box

Protective Film

Part # Description4503 EZ Dish Washer Bracket

Part # Description4504 Clear Counter Protective Film 650' x 24"4505 Red Counter Protective Film 650' x 24"

Work Apron Weha Clip

Weha Waterproof Apron with Velcro & Pockets

• With spring clip• Without a carrier belt for

maximum comfort at work• Dimensions: 55” x 36”• Color: White

• Heavy Duty With practical Velcro pad for attachment of sanding pads

• Zippered pockets• High working comfort• Dimensions: 34” x 48”• Color: Black

Part # Description8152112 Work Apron Weha Clip

Part # DescriptionVD080388 Work Apron with Velcro PVC Lining

Part # Description8152016 Sleeve Protectors with Elastic Waist

Sleeve Protectors with Elastic Waist

• Made of rubberized fabric • Hand accounts with a close-

fitting elastic waistband• With Velcro fastening on the

upper arm pad• Durable quality• Length: 17.7”

Part # DescriptionVZVFP4 4” Weha Medium Density Felt PadsVZVFP5 5” Weha Medium Density Felt Pads

Weha MediumDensity Felt Pads

Misc./Accessories

41mosersinks.com

MOSER


Misc./Accessories

Dressing & Rubbing Stones

Excellent dressing stone for opening up the diamonds in small and large

blades, router bits, core bits, etc.

Silicon Carbide Grinding StonesWeha 4 x 2 Cupwheels are premium grade Green Silicon Carbide cupwheels that can be used both wet and dry.

Designed to grind and shape faster, retain its shape better, and last longer.

4x2 Cupwheels

5x2 Cupwheels

3x3 Cupwheels

CuttersShape & clean silicon carbide wheels back to original condition or to match a profile of choice.

Part # Description8124 Dressing Stone 8” x 1 1/2” x 1 1/2”8125 Rubbing Stone 8" x 1 1/2" x 1 1/2" Grit 248126 Rubbing Stone 8" x 1 1/2" x 1 1/2" Grit 368127 Rubbing Stone 8" x 1 1/2" x 1 1/2" Grit 608128 Rubbing Stone 8" x 1 1/2" x 1 1/2" Grit 808129 Rubbing Stone 8" x 1 1/2" x 1 1/2" Grit 120

Part # Description8119 #1 Dressing Wheel Tool8120 #0 Dresser Wheel Tool8121 #0 Cutter wheels - box of 58122 #1 Cutter wheels - box of 5

Part # Description4216 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 164224 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 244236 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 364246 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 464260 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 604280 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 8042120 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 12042220 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 22042320 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 32042400 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 40042500 4 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 500

Part # Description5224 5 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 245236 5 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 365246 5 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 465260 5 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 605280 5 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 8052120 5 x 2 Silicon Carbide Grinding Stone Wet Dry Grit 120

Part # Description3324 3 x 3 Silicon Carbide Grinding Stone Wet Dry Grit 243336 3 x 3 Silicon Carbide Grinding Stone Wet Dry Grit 363346 3 x 3 Silicon Carbide Grinding Stone Wet Dry Grit 463360 3 x 3 Silicon Carbide Grinding Stone Wet Dry Grit 603380 3 x 3 Silicon Carbide Grinding Stone Wet Dry Grit 8033120 3 x 3 Silicon Carbide Grinding Stone Wet Dry Grit 120

• Max RPM: 9070• For face grinding only• Green silicon carbide• Wet & dry use• Longer lasting

• Max RPM 7258• For face grinding only• Green silicon carbide• Wet & dry use• Longer lasting

• Max RPM 13000• For side grinding• Green silicon carbide• Wet & dry use• Longer lasting

Misc./Accessories

mosersinks.com

MOSER

42


Misc./Accessories

Part # Description4440 4” x 5/8"Thick Yellow Foam Back Up Pads4441 4” x 5/8"Thick Yellow Foam Back Up Pads

Thick Yellow Foam Velcro Flexible Back Up Pads for SandpaperWeha Yellow Foam Velcro Flexible Back Up Pads are made to be used with Velcro backed silicon carbide sandpaperThe 5/8" thick yellow foam gives plenty of cushion for the sandpaper to roll over the edges and inside bowls, etc when sanding. The Yellow Foam Velcro Flexible Backer Pad can be compared to the Diskit flexible back up pads in quality and in performance.

Part # Description4401 4" 40 Grit Box of 1004402 4" 60 Grit Box of 1004403 4" 80 Grit Box of 1004404 4" 120 Grit Box of 1004405 4" 220 Grit Box of 1004406 4" 320 Grit Box of 1004407 4" 400 Grit Box of 1004408 4" 600 Grit Box of 1004400 4" Set - 20 of 60, 80, 12

10 of 220, 320, 400, 6004421 5" 40 Grit Box of 1004422 5" 60 Grit Box of 1004423 5" 80 Grit Box of 1004424 5" 120 Grit Box of 1004425 5" 220 Grit Box of 1004426 5" 320 Grit Box of 1004427 5" 400 Grit Box of 1004428 5" 600 Grit Box of 1004420 5" Set - 20 of 60, 80, 12

10 of 220, 320, 400, 600

Silicon Carbide Velcro Sand PaperWeha line of Silicon Carbide Sandpaper is equal to all the major brand silicon carbide sandpapers out there on the market. Pure grade silicon carbide on heavy E weight paper allows long lasting sanding and polishing in either a wet or dry environment. Weha offers the Silicon Carbide Sandpaper in both 4" hook and Loop as well as in 5" hook and loop. Weha Silicon Carbide Sandpaper can be used both wet and dry. Hook and Loop backed. The best marble Sandpapers to use. Grits 40-600 in stock. Other grits available upon special order request.

• 5/8-11 brass thread• Center water hole for wet use• Can be used wet or dry

Misc./Accessories

43mosersinks.com

MOSER

mosersinks.com

MOSER

44

POLYESTER MASTICS AND RESINS

CONSISTENCY SIZE PCS/BX PART #

Knife Tixo R 1 Ltr 12 1CAA00BL60R

Knife Tixo R 4 Ltr 4 1CAA00BL70R

Knife Tixo R 17 Kg 1 1CAA00BL80R

Knife Grade Tixo Transparent is a high viscosity polyester adhesive used to vertically or horizontally repair, rebuild, bond, and fill. Knife Grade Tixo R is very smooth in consistency and will cure shiny, is very polishable and colors easily to match the stone. It cures fast and bonds extremely strong. Not suitable for temperatures below 32°.

H KNIFE

TIXO TRANSPARENT

Knife Grade H is a high viscosity polyester adhesive used to vertically or horizontally repair, rebuild, bond, and fill. Knife Grade H will cure shiny, is very polishable and colors easily to match the stone. It cures fast and bonds extremely strong. Not suitable for temperatures below 32°.


Knife H 125ml 12 1CAA00BG20

Knife H 1 Ltr 12 1CAA00BG50

Knife H 4 Ltr 4 1CAA00BJ10

Knife H 17 Kg 1 1CAA00BJ50

KNIFE-GRADE

KNIFE-GRADE

KNIFE-GRADE

Indoor / Outdoor Indoor

Professional Use 4

Colorable With Universal Color Pastes

Hardener Cream

Gel time in bulk at 77° 4-6 min

Tacky free time at 77° Approx. 25-30 min

Working time at 77° 60-80 min

Temp range for use after hardening 32°-230°

Ratio of glue to hardener 100:2-3 Mix Ratio











Very good adhesion

Cures in lower temperatures

Very polishable

Colors easily

Very good adhesion


Very polishable

Colors easily

Perfect for light colored stones


Very polishable

Colors easily

SUPER TRANSPARENT KNIFESuper Transparent water clear Knife grade is a high viscosity polyester adhesive used to vertically or horizontally repair, rebuild, bond, and fill. Super Transparent is very smooth in consistency, and will cure shiny, is very polishable and colors easily to match the stone. Changes to white when fully mixed and dries clear. Perfect for light colored stones such as Carrara, Thassos and other light/white stones. Not suitable for temperatures below 32°.


Knife 1 Ltr 12 1GLA00BG50


Professional Use 4


Hardener Cream


Professional Use 4


Hardener Liquid

2 tenax4you.com


45mosersinks.com

MOSER POLYESTER MASTICS AND RESINS

COLORED KNIFE GRADE

TRANSPARENT FLOWING

COLORED FLOWING

KNIFE-GRADE


Professional Use 4

Hardener Cream


Professional Use 4

Hardener Cream


Professional Use 4


Hardener Cream


Tacky free time at 77° 25-30 min














Very good adhesion


Very polishable

Very good adhesion


Very polishable

Very good adhesion


Very polishable

Colors easily

Buff, White, Black Knife grade are high quality polyester mastic adhesives used to vertically and horizontally repair, rebuild, glue, and fill marble, granite and engineered stones. Colored Knife grade will cure shiny and is very polishable. Not suitable for temperatures below 32°. Other colors available upon special request.


Buff Knife 1 Ltr 12 17AC01BG50

Buff Knife 4 Ltr 4 17AC01BJ10

Buff Knife 17 Ltr 1 17AC01BJ20

White Knife 1 Ltr 12 17AB01BG50

White Knife 4 4 17AB01B60

Black Knife 1 Ltr 12 17AT01BG50

BUFF

BUFF

WHITE

WHITE

BLACK

FLOWING

FLOWING

Transparent Flowing is a high quality polyester mastic used to horizontally repair, rebuild, bond, and fill. Flowing will cure shiny, is very polishable and colors easily to match the stone. It cures fast and bonds extremely strong. Cures in lower temperatures. Excellent for rodding reinforcement on a countertop. Not suitable for temperatures below 32°.


Trans FLow 1 Ltr 12 1AAA00BG50

Trans FLow 4 Ltr 4 1AAA00BJ10

Trans FLow 17 Kg 1 1AAA00BL50

Trans Flow 60 Ltr 1 1AAA00BJ20

Trans FLow 200 Ltr 1 1AAA00BL60

Flowing Buff and White are high quality polyester mastics used to horizontally repair, rebuild, glue, and fill marble, and quartz surfaces. Flowing will cure shiny and is very polishable. Not suitable for temperatures below 32°. Other colors available upon special request.


Buff Flow 1 Ltr 12 11AC01BG50

Buff Flow 4 Kg 4 11AC01BJ10

White Flow 1 Ltr 12 11AB01BG50

3tenax4you.com


mosersinks.com

MOSER

46

POLYESTER MASTICS AND RESINSPOLYESTER MASTICS AND RESINS

Crystal flowing is a high quality polyester mastic used to horizontally repair, rebuild, bond, and fill. Crystal is free flowing and will cure shiny, is very polishable and colors easily to match granite and other stones. It is perfectly suited for any application where the adhesive or seam/joint must be hidden. It cures fast and bonds extremely strong. Not suitable for temperatures below 32°.


Flowing 1 Ltr 6 1CMA00BG60

Crystal Knife is a high quality polyester mastic used to vertically or horizontally repair, rebuild, bond, and fill. Crystal is very smooth in consistency, and will cure shiny, is very polishable and colors easily to match granite and other stones. It is perfectly suited for any application where the adhesive or seam/joint must be hidden. Not suitable for temperatures below 32°.


Knife 1 Ltr 6 1CMA00BG50

Crystal is the strongest water clear polyester

CRYSTAL KNIFE

CRYSTAL FLOWING


Tacky free time at 77° Approx. 120 min

Working time at 77° Approx. 180 min








UV Resistant

Cures fast

Bonds extremely strong

Colors easily

UV Resistant

Cures fast

Bonds strong

Colors easily


Professional Use 4


Hardener Liquid


Professional Use 4


Hardener Liquid

KNIFE-GRADE

FLOWING

4 tenax4you.com


47mosersinks.com

MOSER

Domo 10 A & B is a two part Knife grade epoxy designed for all types of stone. Domo is one of the strongest epoxies in the stone industry. It will bond to almost any surface including polished surfaces. Domo is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. White in color.


Knife Part A & B 1 + 1 Ltr 3 1RAA00BG50

Knife Part A 4 Ltr 4 1RAA00BG60A

Knife Part B 4 Ltr 4 1RAA00BG60B

Knife Cartridge 250 ml 12 1RAA00BD90

Rivo 50 A & B is a Knife grade epoxy designed for all types of stone. Rivo is one of the strongest epoxies in the stone industry. It will bond to almost any surface. Rivo 50 is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. Recommended for both interior and exterior applications. Material must be dry before application. Straw in color.


Knife Part A & B 1 + 1 Ltr 3 1RHA00BG50

Knife Part A 17 Ltr 1 1RHA00BG70

Knife Part B 17 Ltr 1 1RHA00BG71

Rivo 15 A & B is a two part Knife grade epoxy designed for all types of stone. Rivo is one of the strongest epoxies in the stone industry. It will bond to almost any surface. Rivo 15 is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. Recommended for both interior and exterior applications. Material must be dry before application. Straw in color.


Knife Part A & B 1 + 1 Ltr 3 1RJA00BG50

15 minute gel time

VOC Compliant

VOC Compliant

VOC Compliant

DOMO

RIVO 50

RIVO 15


Tacky free time at 77° 5 hours

Minimum reaction temperature 50°

Temp range for use after hardening -13 to 143°

Ratio of glue to hardener 1:1 Mix Ratio

Gel time in bulk at 77° 50 min

Tacky free time at 77° 150 min









Super strong - Slow cure

VOC Compliant

Bonds to wet surfaces

Very high adhesion

Great for bonding mixed materials

Easy to color

Very strong - Fast cure

VOC Compliant

Permanent application

Strong - Fast cure

VOC Compliant


Indoor / Outdoor Indoor / Outdoor

Professional Use 4



Professional Use 4



Professional Use 4


KNIFE-GRADE

KNIFE-GRADE

EPOXY SYSTEMS

KNIFE-GRADE

9tenax4you.com


mosersinks.com

MOSER

48

StrongEdge, the strongest clear, flowing epoxy specifically designed for fabrication and lamination. Once applied on a countertop, the stone or substrate will not delaminate or break where StrongEdge has been applied! StrongEdge is the clearest flowing epoxy on the market. StrongEdge does not shrink, it takes a polish, as well as accepts color to color match the stone if necessary. With a 2:1 mix ratio and a set time of about 2 hours at 75 °, Tenax StrongEdge maintains the clearest epoxy with a cure time of 2 hours or less, without losing its structural integrity.

The EZ Sticky Stuff Dispenser is designed to work with the Tenax StrongEdge and StrongEdge Express epoxy glue. with a 2:1 mix ratio preset, the EZ Dispenser will provide the correct epoxy ratio. An optional heater for cold weather climates is also available. If you already have the dispenser you may purchase the heater by itself to complete your unit.

Item SIZE PCS/BX PART #

StrongEdge Flowing 1 qt A, 1/2 qt B 2 sets 1RFSTRONGEDGE1.5KGASET

StrongEdge Flowing 2 A’s, 1B, Gallon 1 set of 3 1RFSTRONGEDGE4KGSET

APPLICATIONS > Laminating granite, marble, engineered stone, etc. > Repair of damaged stone > Permanently secure anchor bolts or sink brackets > Fiberglass or metal rodding > Where a VOC compliant product must be used

> Glueing stone, metal, wood, other substrates together

Dispenser without Heater

Item PART #

Dispenser w/o heater SS-ADJ

Dispenser with Heater SS-OPT-HTR

Correctly mixes Epoxy atthe 2:1 mix ratio

VOC Compliant

Dispenser with Heater

EPOXY SYSTEMS

STRONGEDGE WATER CLEAR FLOWING EPOXY SYSTEM

EZ STICKY STUFF STRONGEDGE DISPENSER






Clearest epoxy on the market

Extremely strong adhesion

Glue stone to metal, wood, other substances

High polish finish

Easily accepts color

Working time of 25 minutes

Cures in about 2 hours at 75°


Professional Use 4


Gallon kit includes: 2 part A, 1 part BQuart kit includes: 1 part A, 1/2 qt of part B

FLOWING

10 tenax4you.com

EPOXY SYSTEMS

49mosersinks.com

MOSER

VOC Compliant

VOC Compliant

STRONGEDGE 45

STRONGEDGE EXPRESS

Clearest epoxy on the market

Extremely strong adhesion

Glue stone to metal, wood, other substances

High polish finish

Easily accepts color

Perfect to use with stone that will be on a CNC, line machines or other automated equipment

EPOXY SYSTEMS

FLOWING

KNIFE-GRADE

StrongEdge 45, the strongest clear, Knife Grade epoxy specifically designed for fabrication and lamination. Once applied on a counter top, the stone or substrate will not delaminate or break where StrongEdge 45 has been applied! Strong Edge 45 is the clearest flowing epoxy on the market. StrongEdge 45 does not shrink, it takes a polish, as well as accepts color to color match the stone if necessary. Tenax StrongEdge 45 maintains the clearest epoxy with an express cure time, without losing its structural integrity. StrongEdge 45 has a true knife grade consistency. After mixing the part A and B together, the Strongedge 45 can be used on 45° miter and vertical applications without running or dripping off. StrongEdge 45 is made for granite, marble, all natural stone, quartz, Engineered, ceramic and porcelain materials.

Tenax StrongEdge EXPRESS, the strongest clear, flowing epoxy specifically designed for fabrication and lamination. Once applied on a countertop, the stone or substrate will not delaminate or break where Tenax StrongEdge EXPRESS has been applied! StrongEdge EXPRESS is the clearest flowing epoxy on the market. Tenax StrongEdge EXPRESS does not shrink, it takes a polish, as well as accepts color to color match the stone if necessary. With a 2:1 mix ratio and a set time of about 40 minutes at 75 degrees, Tenax StrongEdge EXPRESS maintains the clearest epoxy with an express cure time, without losing its structural integrity. VOC Compliant.











Does not shrink

No running/dripping

VOC Compliant



Professional Use 4


Indoor / Outdoor Indoor /Outdoor

Professional Use 4



StrongEdge 45 Knife Quart 1 Qt A, 1/2 Qt B 3 1RFSTRONGEDGE1.5KG45

StrongEdge 45 Knife Gallon 2 Gal A, 1 Gal B 1 1RFSTRONGEDGE4KGSET4


StrongEdge Flowing Express 1 qt A, 1/2 qt B 2 sets 1RSTRONGEDGE1.5STEX

StrongEdge Flowing Express 2 Gal A, 1 Gal B 1 set 1RSTRONGEDGE3GLEX

StrongEdge Flowing Express 2 17kg A, 1 17kg B 1 set 1RSTRONGEDGE17KGEX17 kg - Excellent Size for Dispensers

11tenax4you.com

EPOXY SYSTEMS

mosersinks.com

MOSER

50

Micto is a two part epoxy used for marble, granite, and stone of all types that need to be glued and reconstructed in both indoors and outdoors. Micto is water clear color, has a medium viscosity consistency, and cures SUPER FAST. Works great for rodding as well. Micto is a MUST HAVE if you need a super strong fast adhesion.


Part A & B 1 + 1 Ltr 3 1RFA00HE50

Cartridge 250 ml 12 1RFA00HE40

Fixtop is a super strong epoxy tile and stone adhesive. Fixtop is designed to create optimum adhesion for marble, granite, engineered stone, ceramic, and porcelain tile, slabs, and sheet material. Fixtop has a very smooth consistency and perfect for troweling. Fixtop will glue mixed materials-such as metal to stone, ceramic to wood, stone to panels, cement board, concrete, even composite material used for setting glass and ceramic tile. Fixtop has a low VOC and respects LEED parameters. Fixtop can be used for indoor and outdoor applications. May also be used in wet applications after cure. Bonds hard. Does not soften or dissolve in water.


Trowelable 4 Kg/Part A 4 1RFIXTOP04KGATrowelable 4 Kg/Part B 4 1RFIXTOP04KGBTrowelable 20 Kg/Part A 1 1RFIXTOP20KGATrowelable 20 Kg/Part B 1 1RFIXTOP20KGB

APPLICATIONS: > Setting natural and ES stone countertops on wood, cement,composite substrates

> Tiling walls, ceilings, floors, deck adhesive > Excellent for: FRP, laminate, plywood, cement board, luan, tile

> Adhere stone to steel, aluminum, composite materials, etc

> Setting stone for outdoor fireplaces

VOC Compliant

www.tenax4you.com

EPOXY SYSTEMS

FIXTOP A & B

MICTO FLOWING











Cures super fast

Super strong

Water clear color

Great for rodding

Easy to mix - smooth consistency - trowelable

Easy clean up (water, laquer thinner, acetone)

Excellent bond to granite & mosaics

Excellent bond to tile, laminate & plywood

Does not dissolve or break down in water - great for shower applications, won't delaminate

Allows for expansion and contraction

Cures hard but flexible

100% true epoxy adhesive


Professional Use 4



Professional Use 4


VOC Compliant

KNIFE-GRADE

12 tenax4you.com

EPOXY SYSTEMS

51mosersinks.com

MOSER

Tenax Glaxs BM 1 + 1 glue is a new generation of transparent bi-component system with zero yellowing to bond white marble, white granite and porous stone.Ideal for white stone when a warranty against changing color against the sun is required.

Tenax Glaxs BR Speedy 1 + 1 glue is a new generation transparent bi-component system with zero yellowing to bond white marble, white granite and porous stone. Ideal for white stone when a warranty against changing color against the sun is required.

Tenax Glaxs BR Speedy 1 + 1 glue is a new generation transparent bi-component system with zero yellowing to bond white marble, white granite and porous stone. Ideal for white stone when a warranty against changing color against the sun is required.

GLAXS BM 1:1 CONTAINER KIT

GLAXS BR SPEEDY 1:1 CONTAINER KIT

GLAXS BB65 GLUE SUPER FLOWING GEL POUCH

FLOWING

Gel time in bulk at 77° 5 -20 min






Tacky free time at 77° 15-20min









Totally invisible

Zero yellowing to sunlight

No marks

Good penetration and hardness

Zero VOC

Totally invisible


No marks


Zero VOC

Totally invisible


No marks


Zero VOC


Professional Use 4



Professional Use 4



Professional Use 4


PRODUCT SIZE PCS/BX PART #

Glaxs BM 1:1 Container Kit 400 gr 3 1RGLAXSBMKIT


Glaxs BR Speedy 1:1 Container Kit 400 gr 3 1RGLAXSBRKIT

GLAXS


Glaxs BB65 Glue Super Flowing Pouch 315 Gr each 1RGLAXSBB0315

Very thin viscosity: Perfect for filling pits and holes

No gray lines on white stone

No gray lines on white stone

GEL

GEL

13tenax4you.com

GLAXS

mosersinks.com

MOSER

52

PRODUCT SIZE PCS/Foil Pkg PART #

Glaxs BM 1:1 Cartridge 250 Ml 2 1RGLAXSBM


Glaxs BR 1:1 Speedy White Cartridge 250 Ml 2 1RGLAXSBRWH


Glaxs BR 1:1 Speedy Transparent Cartridge 250 Ml 2 1RGLAXSBR

Requires use of special M200XMR Cartridge Gun

Requires use of specialM200XMR Cartridge Gun


CARTRIDGE LINE

GLAXS BM 1:1 TRANSPARENT CARTRIDGE

GLAXS BR 1:1 SPEEDY WHITE CARTRIDGE

GLAXS BR 1:1 SPEEDY TRANSPARENT CARTRIDGE

Invisible bonding


No marks


Zero VOC

Invisible bonding


Ultra Fast


Zero VOC

Invisible bonding


Ultra Fast


Zero VOC

Gel time in bulk at 77° 5 -20 min













Indoor / Outdoor Outdoor

Professional Use 4


Gun M200MXR

Gun M200MXR

Gun M200MXR


Professional Use 4



Professional Use 4


Tenax Glaxs BM 1 + 1 glue is a new generation of transparent bi-component system with zero yellowing to bond white marble, white granite and porous stone.Ideal for white stone when a warranty against changing color against the sun is required.

Tenax Glaxs BR 1 + 1 glue is a new generation of transparent bi-component system with zero yellowing to bond white marble, white granite and porous stone.Ideal for white stone when a warranty against changing color against the sun is required.

Tenax Glaxs BR 1 + 1 glue is a new generation of transparent bi-component system with zero yellowing to bond white marble, white granite and porous stone.Ideal for white stone when a warranty against changing color against the sun is required.

GEL

GEL

GEL

14 tenax4you.com

CARTRIDGE LINE

53mosersinks.com

MOSER

PRODUCT PART #

M200XMR Cartridge Gun M200XMR

PRODUCT PART #

Cartridge Gun for 50ml cartridge GB-DS-51

PRODUCT PART #

Son of a Gun 10:1 for 250 Ml GB-GM250ML

PRODUCT PART #

50 ml Multibond Static Mixing Tip GB-MBHX-0516T

250/500 ml Multibond Static Mixing Tip GB-MBQX-0824


MULTIBOND 10:1 HARD SURFACE ACRYLIC CARTRIDGE

CARTRIDGES GUNS & TIPS

1:12:1

10:1

Please visit www.tenax4you.com to see the complete line of Multibond colors. Custom matching available. Available in 50 ml, 250 ml and 500 ml sizes.

Super flexible, dripless technology for easier fabrication and less waste!

Can be frozen without losing bonding integrity

Dispensed in standard 10:1 seam guns

As strong or stronger than all leading brands

Colored activator for seaming assurance

Colored activator ensures that the activator is mixing...if glue is colored it is activated

Greenguard certified as VOC

Great color matches to all leading brands of solid surface and quartz

Two static mixing nozzles included.


Material Porcelain, sintered stone, glass, travertine, limestone, engineered stone, marble, quartz,natural stone products, polyester, acrylic, copper/metallic infused solid surface

Professional Use 4

Colorable Available in many colors, custom mix available

Gun M200XMR, GB-GM250ML

CARTRIDGE LINE

GEL

Working time at room temp 8-10 min

De-rope time at room temp 5-10 min

Fixture time at room temp 17-20 min

Routable 20-25min

Operating temp 65°F to 85°F (18°C to 30°C)

15tenax4you.com

CARTRIDGE LINE

mosersinks.com

MOSER

54

CARTRIDGE LINE

Micto is a two part epoxy used for marble, granite, and stone of all types that need to be glued and reconstructed in both indoors and outdoors. Micto is water clear color, has a medium viscosity consistency, and cures SUPER FAST. Works great for rodding as well. Micto is a MUST HAVE if you need a super strong fast adhesion.


Micto Cartridge 210 ml 12 1RFA00HE40

MICTO CARTRIDGE

DOMO CARTRIDGE

MASTIDEK FAST OUTDOOR FOR DEKTON

STRONGBOND FOR LAPITEC






Cures super fast

Super strong

Water clear color

Great for rodding

Comes with two nozzles

GEL

GEL

GEL

GEL

Domo 10 A & B is a two part Knife grade epoxy designed for all types of stone. Domo is one of the strongest epoxies in the stone industry. It will bond to almost any surface including polished surfaces. Domo is designed for permanent application. The stone will break before the bond will. Suitable for temperatures below 32° as well as extreme heat. White in color.


Domo Cartridge 210 ml 12 1RAA00BD90


Tacky free time at 77° 5 hours





Tacky free time at 77° Approx. 15 min




Tacky free time at 77° Appox. 15 min




VOC Compliant

Bonds to wet surfaces

Very high adhesion




VOC Compliant - Non hazmat

Zero yellowing

Completely invisible




VOC Compliant - Non hazmat

Zero yellowing

Completely invisible




Professional Use 4


Gun M200XMR

Gun M200XMR


Professional Use 4


Gun M200XMR


Professional Use 4




Please see page 41 for complete list of colors and product codes

Please see page 40 for complete list of colors and product codes

Requires use of special M200XMR Cartridge

Gun

Requires use of special M200XMR Cartridge

Gun

Mastidek Fast Outdoor Cartridge Glue for Cosentino Dekton is a new generation bi-component resin with zero yellowing to the sun and UV rays. Mastidek Cartridge offers good penetration and hardness. Mastidek Cartridge can harden at 0°C. Will not create shadows around cracks or seams. The reactivity of Mastidek Cartridge is slightly influenced by the temperature.

Strongbond for Lapitec is a new bi-component glue for bonding Lapitec materials


Professional Use 4


Gun M200XMR

16 tenax4you.com

CARTRIDGE LINE

55mosersinks.com

MOSERINKS / DYES

Perfect Drop Size

DESCRIPTION SIZE PART #

Universal Color Kit/Set of 10 2.5 oz 1H3584ASET

Black Universal Color 2.5 oz 1H3584BLACK

White Universal Color 2.5 oz 1H3584WHITE

Red Universal Color 2.5 oz 1H3584RED

Red Brown Universal Color 2.5 oz 1H3584REBROWN

Yellow Universal Color 2.5 oz 1H3584YELLOW

Green Universal Color 2.5 oz 1H3584GREEN

Brown Universal Color 2.5 oz 1H3584BROWN

Blue Universal Color 2.5 oz 1H3584BLUE

Gray Universal Color 2.5 oz 1H3584GREY

Buff Universal Color 2.5 oz 1H3584BUFF

Black Universal Color 10 oz 1H3586BLACK

White Universal Color 10 oz 1H3586WHITE

Red Universal Color 10 oz 1H3586RED

Red Brown Universal Color 10 oz 1H3586REBROWN

Yellow Universal Color 10 oz 1H3586YELLOW

Green Universal Color 10 oz 1H3586GREEN

Brown Universal Color 10 oz 1H3586BROWN

Blue Universal Color 10 oz 1H3586BLUE

Gray Universal Color 10 oz 1H3586GRAY

Buff Universal Color 10 oz 1H3586BUFF


Universal Granite Color Kit/Set of 6 2.5 oz 1H3585ASET

Giallo Veneziano Universal Color 2.5 oz 1H3585VENETIANYELLOW

Santa Cecilia Universal Color 2.5 oz 1H3585SANTACECILIA

Blue Pearl Universal Color 2.5 oz 1H3585BLUEPEARL

Baltic Brown Universal Color 2.5 oz 1H3585BALTICBROWN

Uba Tuba Universal Color 2.5 oz 1H3585UBATUBA

Black Galaxy Universal Color 2.5 oz 1H3585BLACKGALAXY

Venetian Yellow Universal Color 10 oz 1H3587VENETIANYELLOW

Santa Cecilia Universal Color 10 oz 1H3587SANTACECILIA

Blue Pearl Universal Color 10 oz 1H3587BLUEPEARL

Baltic Brown Universal Color 10 oz 1H3587BALTICBROWN

Uba Tuba Universal Color 10 oz 1H3587UBATUBA

Black Galaxy Universal Color 10 oz 1H3587BLACKGALAXY

Available in: > Black > White > Red > Red Brown > Yellow

> Green > Brown > Blue > Gray > Buff

Available in: > Giallo Veneziano > Santa Cecilia > Blue Pearl > Baltic Brown > Uba Tuba > Black Galaxy

25%MORE INEACH BOTTLE

Available in 2.5 oz. & 10 oz. Bottles

Available in 2.5 oz. & 10 oz. Bottles


Professional Use 4

Mixing Ratio Max. quantity of 2-3% in weight of the resin

For polyester, epoxy and acrylic glue

Available in 2.5 oz & 10 oz bottles

Brilliant colors

Easy to mix

Tips designed to provide perfect drop size

Easy squeeze bottles

UNIVERSAL COLOR PASTE FOR POLYESTER & EPOXY GLUE

UNIVERSAL GRANITE COLOR PASTE FOR POLYESTER & EPOXY GLUE

Tenax Universal Colors were made to offer 1 solution for all your adhesive needs. Brilliant Colors that can be used by themselves or mix multiple colors together to create the perfect color match glue for your stone application. Save 50% on your colors by only having to buy 1 color for all your adhesives: Polyester, Epoxy, and Acrylic glues.

18 tenax4you.com

INKS / DYES

mosersinks.com

MOSER

56

SURFACE TREATMENTS

Use to obtain "wet" effect

Excellent water-oil repellent properties

Anti graffiti

No surface film

Perfect for matching edge of stone with stone surface

No yellowing to sunlight

Works well to disquise small scratches

Use to obtain "wet" effect on more porous & exotic stones


Anti graffiti

Perfect for matching edge of stone with stone surface

No yellowing to sunlight

Works well to disquise small scratches

Removes excess Ager or Ager Tiger caused by over application or allowing Ager or Ager Tiger to dry on surface

Eliminates sticky, tacky residue left over by Ager or Ager Tiger

AGER STONE COLOR ENHANCER AND SEALER

AGER TIGER STONE COLOR ENHANCER AND SEALER FOR EXOTIC STONES

AGER REMOVER

Suitable for color enhancing all types of marbles, travertines, stones, granites and agglomerates. Used to obtain a “wet” effect both for indoor and outdoor application. Perfect for bringing out a deep rich color in stone. Works excellent for matching the edge of the stone with the surface polish. May be applied on polished, flamed, rough or sanded surfaces. The product does not change color when exposed to the sun. Ager works as both a stone color enhancer AND a premium grade high quality sealer.


Liquid .250 Ltr 50 1MPA00BD80

Liquid 1 Qt 12 1MPA00BG50

Liquid 5 Ltr 1 1MPA00BG60





We suggest the application of Ager Tiger on the edge of resined granites, particularly exotic stones, when it is necessary to match the color between the resin treated top and the untreated edge. It is also suitable for aging marbles, travertines, stones, granites, and agglomerates when the surface is very porous. AGER TIGER is also a fantastic sealer against oil, graffiti, and household stains.


Liquid .250 Ltr 50 1MPA001BG40


Dark Honed

Light Honed

The best thing about Ager is: When it goes on, it’s on!

The worst thing about Ager is: When it goes on, it’s on!


Professional Use 4

Materials Marble, travertine, granite, stones and agglomerate

Coverage 160-180 sq. ft. per quart depending on porosity of stone


Professional Use 4

Materials Marble, travertine, granite, stones and agglomerate

Coverage 160-180 sq. ft.per quart depending on porosity of stone

VOC Compliant

20 tenax4you.com

SURFACE TREATMENTS

57mosersinks.com

MOSER SURFACE TREATMENTS


Anti graffiti

Approved for food contact in compliance with the European rule 90/128 ECC

Penetrating sealer


Anti graffiti

Will not change color of stone

UV stable

Penetrating sealer


Anti graffiti

Water based

Does not change color of stone

UV stable

VOC free

QUARTZ TONER

HYDREX SEALER

GLYDEX SEALER


Liquid .250 Ltr 50 1MPA00BD80






Professional Use 4

Materials Quartz, engineered stone and agglomerates


Liquid .250 Ltr 50 1MMA00BD80

Liquid 1 Qt 12 1MMA00BG50

Liquid 5 Ltr 1 1MMA00BG55




Liquid .250 Ml 50 1MPA00BG501250


Hydrex is a penetrating sealer that prevents liquids (stains) from penetrating into the material through its micro-porosities. Hydrex allows the stone to breathe to maintain its natural characteristics. It is especially affective on polished granite and polished marbles. Hydrex operates on the surface of materials. E

Tenax Quartz Toner is a surface treatment that can be used to enhance Quartz, Engineered, and agglomerate stones. Perfect for bringing out a deep rich color in quartz and engineered stone. Works excellent for matching the edge of the stone with the surface polish. May be applied on polished, flamed, rough, sanded, honed, and brushed finishes. Works well to disguise small scratches. Quartz Toner is also suitable to protect surfaces against oil and water. Quartz Toner works as both a stone color enhancer AND a premium grade high quality sealer. Excellent for counter tops because it is approved for food contact in compliance with the European rule 90/128 ECC. 1 Liter covers approximately 215-300 sq feet.

Glydex is an anti-stain, water and oil proof sealer for granite and similar stone.Hydex is completely free of organic solvent. Glydex operates on the surface of the stone. Glydex fills the microporosities of the stone to prevent liquids from penetrating the material yet remains permeable to vapours, allowing the stone to breathe and keep the characteristics of the stone unchanged.


Glydex-Water Based 1 Ltr 12 1MTGLIDEX

Our most popular granite sealer

Coverage 215-300 sq. ft. per liter depending on porosity of stone

Indoor / Outdoor Indoor/outdoor

Professional Use 4

Materials Granite, carrera, Thassos, Trani, Botticini, marfill

Coverage 215-323 sq. ft per liter depending on porosity of stone

Indoor / Outdoor Indoor/outdoor

Use For all users

Materials Granite, marble

Coverage 215-323 sq. ft.per liter depending on porosity of stone

21tenax4you.com

SURFACE TREATMENTS

mosersinks.com

MOSER

58

Proseal is suitable to protect granite against liquid chemicals like beverages and similar liquids. It also works well with polished, honed, marble with high porosity. Proseal fills the pores of the stone and protects the stone from oil and water stains. Proseal allows the stone to breathe without leaving a film on the surface. Wait 24 hours to allow the stone to dry and reach 100% protection. The protection will last up to 4-5 years if the product is applied correctly on the surface and areas that are not under direct wear and use.

PROSEAL PREMIUM GRADE SEALER

PROTEX DEEP PENETRATING SEALER

UNIBLACK BLACK GRANITE TREATMENT

Protex is one of the top premium sealers on the market today. Protex works extremely well on sandy amorphous material mixed with the presence of silicate and calcium carbonate, such as Pietra Leccese, Pietra Vicenza, limestone, etc. After the application a light increase of color can be seen but depends on the type of stone and where the product is applied.


Liquid 1 Qt 12 1MTPROTEX

SURFACE TREATMENTS

Deep penetration into the pores of the stone

Will not change color of stone


UV Stable

Excellent for polished, honed, brushed, matte finishes

Deep penetration into the pores of the stone


UV Stable

Black dye for black granite

Improves defects in black stone

Helps unify multiple slabs

Black liquid wax for black granite

Improves black color

Helps protect Uniblack1

Creates a topical protection


Professional Use 4

Materials Granite, marble, limestone, travertine, grout



Professional Use 4

Materials All types of stone and porous material



Professional Use 4

Materials Black granite



Professional Use 4

Materials Black granite



Liquid .250 Ltr 50 1MTPROSEAL02

Liquid 1 Qt 12 1MTPROSEAL

Liquid 5 Ltr 1 1MTPROSEAL05

Liquid 200 Ltr 1 1MTPROSEAL200

No other sealer will penetrate and protect as well as Proseal.

Seals grout also.

UNIBLACK 1 IS THE TREATMENT: Uniblack 1 is a very strong, concentrated black color enhancer designed specifically to eliminate the defects of black granite. Its application darkens the surface of the material and makes it more unified in color and consistency. Quick drying.

UNIBLACK 2 IS THE MAINTENANCE: Uniblack 2 is a formulated black liquid wax used to increase the black effect on polished, brushed and smooth surfaces. The Uniblack 2 increases the black effect while increasing the gloss. The product can be used on automatic waxing machines or manually. Recommended for restoring old materials which have lost their blackness.


Liquid 1 Qt 12 1MUNI1

Liquid 1 Qt 12 1MUNI2

22 tenax4you.com

SURFACE TREATMENTS

59mosersinks.com

MOSER

Sealer Application ChartMATERIAL PROTEX PROSEAL HYDREX GLYDEX

MARBLE - Polished MODERATE VERY GOOD VERY GOOD GOOD

MARBLE - Honed/Brushed GOOD VERY GOOD MODERATE MODERATE

GRANITE - Polished MODERATE VERY GOOD GOOD GOOD

GRANITE - Honed/Brushed GOOD VERY GOOD LOW MODERATE

EXOTIC GRANITE - Polished MODERATE VERY GOOD MODERATE GOOD

EXOTIC GRANITE - Honed/Brushed GOOD VERY GOOD LOW MODERATE

LIMESTONE/SANDSTONE - Polished VERY GOOD VERY GOOD GOOD MODERATE

LIMESTONE/SANDSTONE - Honed/Brushed VERY GOOD VERY GOOD LOW MODERATE

TERAZZO,CONCRETE AGGLOMERATE - Polished VERY GOOD VERY GOOD GOOD MODERATE

TERAZZO,CONCRETE AGGLOMERATE - Honed/Brushed VERY GOOD VERY GOOD GOOD MODERATE

ENGINEERED STONE - Polished GOOD GOOD MODERATE MODERATE

ENGINEERED STONE - Honed/Brushed GOOD GOOD LOW MODERATE

CHANGE THE COLOR OF THE STONE YES/SHEEN NO NO NO

SURFACE TREATMENTS

23tenax4you.com

SURFACE TREATMENTS

mosersinks.com

MOSER

60


Liquid Classic 1 Qt 12 1MAA00BG50

Liquid New 1 Qt 12 1MAA00BG60


Wax Remover 1 Qt 12 1MCT02BG50

CeraFluida Liquid “Classic” is a transparent liquid wax, used to increase the polishing effect on onyxes, marble, natural stones, granite, agglomerates, and terrazzo. The application may increase the polish from 6-7 to 19-20 points of gloss.

CeraFluida Liquid “New” wax is for the treatment of natural stones like onyxes, marbles, agglomerates and terrazzo material.

Tenax Wax Remover removes liquid and paste waxes off the surfaces of stone. Transparent in color.

Tewax is used to increase the brilliance of glossy surfaces like onyxes, marble, natural stones, granite, agglomerates, terrazzo. Tenax solid wax is a result of special waxes melted through solvents that allow a high penetration level on treated material leading to a long-lasting effect.

COLOR CONSISTENCY SIZE PCS/BX PART #

Black Knife 1 Qt 12 1MCT01BG50

Clear Knife 1 Qt 12 1MCA00BG50

SURFACE TREATMENTS

TEWAX PASTE WAX

CERAFLUIDA LIQUID WAX

CERAFLUIDA WAX REMOVER

Brightens up lost polish

No solvents that contain trichloroethylane (may cause dangerous irreversible effects to humans

May increase polish from 5-6 to 15-16 point of gloss

Long lasting effect


Use For all users

Materials Onyx, marble, granite, natural stones, agglomerates, terrazzo



Professional Use 4

Materials Onyx, marble, granite, agglomerates, terrazzo



Professional Use 4

Materials Onyx, marble, natural stone, granite, agglomerates, terrazzo


Increases polishing effect

Use on rough or brushed surfaces to obtain a semi-matte effect

Drys very quickly

Marble - Increases polish, eliminates superficial defects and accents the color

Granites - increases polish and enhances color

Light protective effect and stain resistant

Removes liquid and paste waxes off of stone surfaces

Easy-to-useProfessional Use 4

Materials Stone

24 tenax4you.com

SURFACE TREATMENTS

61mosersinks.com

MOSER


Liquid 1 Ltr 12 1MEA00BG60


Liquid Spray .5 ltr 24 1MEA00BG30

COLOR CONSISTENCY SIZE PCS/BX PART #

CLEAR Liquid 1 Qt 12 1MRA00BG50

BLACK Liquid 1 Qt 12 1MRT01BG50

Pectro Black

Pectro Clear


Liquid 1 Qt 12 1MTPETROLUX

Liquid 200 Ltr 1 1MTPETROLUX200

SURFACE TREATMENTS

PECTRO WEBBING & FISSURE REPAIR

TELUX LIQUID VARNISH

JET SPRAY LIQUID AEROSOL POLISH

PETROLUX TRANSPARENT MICROFISSURE REPAIR & POLISH

Hide, disquise or eliminate "webbing" or microfissures

Pectro Clear - all polished stone but works especially well on medium to light colored stone

Pectro Black - polished dark stone

Drying time - 5 minutes

Creates a polished effect to both smooth and raw materials

Forms hard anti-scratch film that is extremely durable

Excellent for chiseled egdes and the underside of overhangs

For both counter tops and floor applications

UV stable - does not yellow

Drying time - 30-40 min. at room temperture

For non-polished surfaces that were missed during fabrication

Great for hard to reach areas

Forms film/coating on surface that creates a polished look

Drying time - 15 minutes

Great job site touch ups

Disquise webbing and microfissures

Increase the color depending on the granite

Adds topical shine and polish to surface

Easy to apply - simply apply to surface, allow to haze and wipe off with clean cloth or towel


Professional Use 4

Materials Marble, granite, onyx, agglomerates


Indoor / Outdoor Indoor - not for areas to be walked on

Professional Use 4

Materials Marble, granite, onyx, agglomerates


Indoor / Outdoor Indoor - not for areas to be walked on

Professional Use 4

Materials Polished stone



Professional Use 4

Materials All polished stone


25tenax4you.com

SURFACE TREATMENTS

mosersinks.com

MOSER

62

AUTOMATED EGDE DIAMONDSTenax automated edge polishing wheels are designed for both single and multihead machines. May be used on Marmo MeccanicaTM, Park IndustriesTM, SassoTM, OmegaTM, MontresorTM, USG machinesTM, CommandulliTM, CMPITM, etc.

DESCRIPTION PCS/BX PART #

5” Flat Edge FG 120 TT Each LE125FINT24120









5” Snail Lock Flat Edge Resin

Diamonds

6” Snail Lock Flat Edge Resin

Diamonds

5” Snail Lock Bullnose Resin Diamonds

6” Snail Lock Bullnose Resin Diamonds


5” Bullnose FG 120 TT Each LT125FINT3120





























ABRASIVES

29tenax4you.com

ABRASIVES

63mosersinks.com

MOSERCLEANING & MAINTENANCE

TeRUST RUST POULTICE POWDER

TeCLEAN STAIN POULTICE POWDER

TePOUCH STAIN REMOVER POUCH

TeETCH ETCH & WATER MARK REMOVER

Contains stone-safe surfactants and diatomaceous earth to remove stains on stone

Contains 3 easy-to-use pouches

Draws the stain out of the stone

Removes stains such as oil, grease, wine, tea,coffee and other organic stains

Use For all users

Materials Granite, marble, travertine, limestone, terrazzo, concrete, brick, sanded grout

Use For all users


Use For all users


Use For all users

Materials marble, travertine, limestone, alabaster, onyx

Combination of specially formulated polishing powders

Removes etch marks, water marks, water rings, dull spots and even light scratches


TeEtch & Water Mark Remover 8 oz 1TEFILLETCH


TeRust Rust Remover Powder 8 oz 1TEFILLRUST


TeClean Stain Poultice Powder 8 oz 1TEFILLCLEAN


TePouch Stain Poultice Pouch 3 Pouches 1TEFILLPOUCH

Not for use on Granite

Contains a special blend of chelates for removing rust stains from stones


Contains stone-safe surfactants and diatomaceous earth to remove stains on stone


Removes stains such as oil, grease, wine, tea,coffee and other organic stains

34 tenax4you.com

CLEANING & MAINTENANCE

mosersinks.com

MOSER

64


TeFILL CHIP REPAIR

TeBLOSSOM GREEN STAIN REMOVAL KIT

Removes the stain from chip repair kits

Professional Use 4

Materials All natural stones

Tenax Tefill kit is a dual viscosity stone repair kit. Use Tefill 1 for fissures, scratches or chips on horizontal surfaces. Use Tefill 2 to repair larger chips on both horizontal and vertical surfaces. Use Tefill 3 Activator to create the chemical reaction.


TeBlossom Green Stain Removal Kit 4 oz #1 / 4 oz #2 1MAAPOU15

TeBlossom Green Stain Removal Kit with TeClean

4 oz #1 / 4 oz #2 8 oz TeClean TEBLOSSOMKIT

Dries in under a minute

Cures clear and leaves a polished finish on stone

Comes in a self storing reusable container

Buy as a kit and as individual replacements

Removes the green stain from chip repair kits

Pulls out the stain caused by Cyanoacrylate and activator

Does not etch stone

Chemically removes the stain

Application similar to poultice

Also available with TeClean

PRODUCT SIZE CASE PART #

Tefill Kit Set of 3 Set/3 12 1TEFILLKIT

Tefill 1 CPS105 2oz 12 1TEFILL1

Tefill 2 CPS500 2oz 12 1TEFILL2

Tefill 3 Activator-pump 2oz 12 1TEFILL3

Tefill 3 Activator-Aerosol 10oz 12 1TEFILL3A

Tefill 1 Large Bottle 16 oz ea. 1TEFILL11LB

Tefill 2 Large Bottle 16 oz ea. 1TEFILL21LB

35tenax4you.com


65mosersinks.com

MOSER

Lustro ItalianoTM Stone Cleaner is a 32 ounce bottle with attachable sprayer that contains no harsh detergents that can strip away stones natural polish. Unlike some other household solvents, this cleaner will not shorten the life of stone sealants. Can be used on natural stone, quartz stone, solid surface products such as corian®, as well as stainless steel and ceramic tile.

Lustro Italiano™ Stone Polish

Lustro ItalianoTM Stone Polish is a 13.5 ounce aerosol can with sealants that have unique properties that bring out the luster of natural stone. Compared to other polishes, it creates a deeper long-lasting shine.

Lustro Italiano™ Stone Sealer is a 8.5 ounce ultra premium grade sealer designed to penetrate deep into the micropores of stone: granite, marble, travertine, limestone, and engineered stone. Lustro Italiano stone sealer is also a premium grade grout sealer and works excellent on all natural stone tiles. Lustro sealer does not change the color of the stone, does not leave a film on the stone and provides up to 5 years of protection.

Lustro Italiano Etch & Water Mark Remover™ polishing compound is a combination of specially formulated polishing powders designed specifically to remove etch marks, water marks, water rings, dull spots,and even light scratches on marble, travertine, limestone, alabaster, and onyx stone.

Lustro Italiano™ Rust Remover Powder is designed to remove rust stains out of granite, marble, travertine, limestone, terrazzo, concrete, brick, and sanded grout.

TeRust contains a special blend of chelates for removing rust stains from stone. By utilizing the stain process reversal technique, the Lustro Rust Stain Remover Powder draws the stain out of the stone.

Lustro Italiano Stain Remover Pouch™ contains stone-safe surfactants and diatomaceous earth with the ease of a pouch similar to those used in teabags, for the first easy to use poultice stain remover for stone products. By utilizing the stain process reversal technique, the Lustro Italiano Stain Pouch draws the stain out of the stone.

Designed to remove stains such as oil, grease, wine, tea, coffee, and other organic stains out of granite, marble, travertine, limestone, terrazo, concrete, brick, sanded grout, etc

Lustro Italiano™ Stain Remover Poultice Powder contains stone-safe surfactants and diatomaceous earth to remove stains on stone. By utilizing the stain process reversal technique, Lustro Italiano Poultice Powder draws the stain out of the stone.

Designed to remove stains such as oil, grease, wine, tea, coffee, and other organic stains out of granite, marble, travertine, limestone, terrazo, concrete, brick, sanded grout, etc.

Lustro Italiano™ Stone Sealer

Lustro Italiano™ Etch & Water Mark Remover

Lustro Italiano™ Rust Remover Powder

Lustro Italiano™ Stain Remover Pouch

Lustro Italiano™ Stain Remover Powder

DESCRIPTION SIZE PCS/BX PART #

Cleaner Spray Bottle 32 oz 12 LUSTROCLEAN


Etch & Water Mark Remover 8 oz 12 LUSTROETCH


Rust Remover Powder 8 oz 12 LUSTRORUST DESCRIPTION SIZE PCS/BX PART #

Stain Remover Powder 8 oz 12 LUSTROPOWDER


Stain Remover Pouch 8 oz 12 LUSTROPOUCH

Lustro Italiano™ Stone Cleaner Wipes are perfect for all kitchen countertop surfaces in one product. It’s streak free formula leaves kitchen countertops sparkling clean after each use. Use Lustro Italiano™ Stone Cleaner Wipes daily for cleaning granite and marble countertops, vanities, concrete countertops, and all brands of solid surfaces (i.e. Corian®), engineered stone (i.e. Silestone®, Zodiac®), and laminates (Formica®). Simply wipe and throw away. Lustro Italiano™ Stone Cleaner Wipes are safe for food-handling surfaces and there is no rinsing required. 30 sheets per box.

Lustro Italiano™ Cleaner Wipes


Cleaner Wipes 30 count 12 LUSTROWIPES


Polish Aerosol Spray 14 oz 12 LUSTROPOL


Stone Sealer 250 ml 12 LUSTROSEAL

Lustro Italiano™ Stone Cleaner

LUSTRO ITALIANO

36 tenax4you.com

LUSTRO ITALIANO

mosersinks.com

MOSER

66

POLISHING POWDER

MEDIUM DENSITY FELT PADS

SNAIL LOCK BACK UP

FRANKFURT PLASTIC SHOES

RAZOR BLADES

HARDENER

Tenax polishing powders are formulated specifically to create a high gloss finish on stone. Tenax polishing powder may be used on countertops, floors, and as a general maintenance product. Simple and easy to use. Tenax marble polishing powder is designed for marble, terrazzo, and agglomerated marble surfaces, Tenax Granite polishing powder is designed for granite to bring out a higher gloss finish on all types of granite.


Granite Polishing Powder-2LB (1kg) 1 POLVERGR1KG

Granite Polishing Powder-33 lb (15kg) 1 POLVERGR

Marble Polishing Powder-2LB (1kg) 1 POLVERMA1KG

Marble Polishing Powder-33 lb (15kg) 1 POLVERMA


4” Velcro Medium Density Felt Pad 6 VZVFP4

5” Velcro Medium Density Felt Pad 6 VZVFP5

MISC.

4" and 5" size

Velcro backed

Excellent for polishing powders and waxes


Paste 2 oz 6 1PAA00VC80

Paste 6 oz 6 1PAA00VC90

Liquid 2 oz 6 1PAA00VB94

Liquid hardeners are specifically designed for Crystal Knife, Crystal Flowing, Thassos, and Nitor. All other polyesters use the white paste hardener.

PRODUCT PCS/BX PART #

Frankfurt complete shoe 12 VZ070045

Frankfurt left shoe 12 VZ6190601

Frankfurt right shoe 12 VZ6190602

PRODUCT CASE PART #

Razor Blade 100/box 50 VZ13135


4” x 5/8-11 Aluminum Snail Lock Backer 6 3ADSL4581

5” x 5/8-11 Aluminum Snail Lock Backer 6 ALDHOLDER130

4" and 5" size

5/8-11 brass thread

Designed for both automated and hand use

Rubber filled to absorb vibration

If abrasive jams snail lock will break away

Heavy plastic for durability

Just screw or bolt on to existing plates

Comes as either a complete shoe or as individual right and left

Breaks away if abrasive is jammed to prevent machine damage

Premium grade

US made

No. 9 razor blades

100 per box

38 tenax4you.com

MISC.

67mosersinks.com

MOSER MISC.

High density fiberglass

Reinforced with Carbonic Fiber component

Dual spline Carbonic Fiber for extra strength

100 meter (330 ft) rolls

3/8" x 1/8" (10mm x 3mm) dimensions

SIZE PCS/BX PART #

3/8” x 1/8” x 330’(10mm x 3mm x 100m) 5 VZ8160061

The labor and time savings with not having to clean and grind each rod is more than enough to offset the costs of the fiberglass rodding. Fiberglass rodding is one of the strongest materials that can be used to increase load tolerance and deflection up to 1600%! Fiberglass rodding greatly increases safety. If a piece of stone breaks during an install with fiberglass rodding, the stone stays intact. Therefore no employees are injured nor any damages to the floor will need to be repaired. No waste! Comes in 100 foot and 300 foot rolls. May be used on arches, round tables, or any special application that needs strength or reinforcement.

SIZE PCS/BX PART #

3/8” x 1/8” x 300’ 5 VZ8160058

3/8” x 1/8” x 100’ 5 VFRC100

SIZE PCS/BX PART #

Fiberglass Mesh 5’ x 1000’ (150cm x 300m) Roll 1 1H3480H018

Fiberglass Mesh 6’ x 1000’ (180cm x 300m) Roll 1 1H2480H01500

Fiberflass matting/gauze is designed for thin slabs and fragile stones that break easily, such as marble, onyx, etc. Tenax fiberglass mesh is designed in 1/4” squares and come in different widths to match stone applications. For extra strength add fiberglass mesh suggested by the Marble Institute of America to create the ultimate support! Used by quarriers around the world, now available for fabricator use.

FIBERGLASS MESH

WHITE FIBERGLASS RODDING

CARBON FIBER RODDING

Adds extra strength to slabs

Recommended by the Marble Institute of America for ultimate support

Used by quarriers around the world

Will not rust over time

Mechanically bonds to the adhesive rather than just surrounding it like metal rodding.

Quickly and easily cut the needed length

39tenax4you.com

MISC.

mosersinks.com

MOSER

6822 US (706) 658-1122 · EU +359 431 64477 · www.superabrasive.com

GlossFire ProEdge Multi Edge Polishing System (previously marketed and known as TORO ProEdge) is the ideal solution for any single head, multi-edge automated polishing machine, such as Park PRO-EDGE®. GlossFire ProEdge features 2 metal bond shaping wheels in coarse and fine grits, as well as three resin polishing pads. This system is designed to fabricate and polish various types of profiles including Flat, Bevel, Half and Full Bullnose, Pencil Round, and others, and achieves excellent results on both natural and engineered stones.

GlossFire ProEdge Polishing System

Step PSI RPM Travel Speed (ft/min) Depth of Cut (in)* Miter Start Location (angle°) Miter Stop Location (angle°)

1 100 3600 50 + Amp Control 0.125 7.0** 180

2 100 3600 80 0.032 6.5 180

3 35 3600 100 0.000 6.0 176

4 35 3600 100 0.000 5.5 176

5 35 3600 100 0.000 5.0 176

* Amount of material to be removed** We recommend taking three start passes at a 7 degree angleAdditional settings are available for other machine models. Contact Superabrasive for details.

Suggested GlossFire ProEdge Application Data

Why is GlossFire ProEdge Different?

• This system is like 2 in 1! Unlike competitor’s 5 Step Systems, GlossFire ProEdge is able to achieve a superior polish on the flat portion of the edge by using only 5 steps, when other systems require an additional three polishing steps to achieve the same results. GlossFire ProEdge polishes round and flat edges effortlessly, when others can’t.

• A unique design allows for water to flow between the edge of the stone and the tool, which prevents burning and smearing on engineered materials.

Previously marketed and known as TORO ProEdge

POLISHING DISCS

69mosersinks.com

MOSER CN

C ro

ute

r bits G

lossFire

ProEd

ge

, F, B sink w

he

els c

ore

bits, a

nc

ho

r bits c

uttin

g &

sha

pin

g p

olish

ing

pa

ds, to

ols lip

pa

ge

ba

cke

rs, ad

ap

tors

23US (706) 658-1122 · EU +359 431 64477 · www.superabrasive.com

Item Number Description Size Bond Attachment Thickness

GF-STEP1-MB GlossFire ProEdge System, Step 1, Metal Bond 4in / 100mm metal snaillock 4 mm

GF-STEP2-MB GlossFire ProEdge System, Step 2, Metal Bond 4in / 100mm metal snaillock 4 mm

GF-STEP3 GlossFire ProEdge System, Step 3, Resin Bond 4in / 100mm resin Velcro 5 mm



GlossFire ProEdge Multi-Edge Polishing System, 4 Inch

GlossFire ProEdge Polishing System

Recommended Backer for Steps 3-5

Item Number Description Size Attachment

GF-SNAILLOCK4 Hard Plastic Backer for GlossFire ProEdge Steps 3-5 4 in / 100mm snaillock

Previously marketed and known as TORO ProEdge

POLISHING DISCS

mosersinks.com

MOSER


GlossFire Multi-Edge Polishing System (previously marketed and known as TORO-B) is designed to polish flat as well as most rounded edges. All GlossFire discs fit on automated wet-polishing multi-head machines using the snail lock adaptor, such as Marmo Meccanica (LTH & LTT), Sasso Meccanica (TE Experience & RCM Multi-head), Park Industries (Velocity), Montresor (Lara & Luna) and others.

The multi-edge polishing discs are available in 5 and 6 inches in resin and copper bond.

GlossFire Multi-Edge Polishing System

Suggested GlossFire Multi-Edge Application Data

• 5 head machines: Start with Grit 100 resin and follow with Grits 200, 500, 1000 and 2000.

• 6 head machines: Start with Grit 100 resin and follow with Grits 200, 500, 1000, 2000 and Buff.

• 8 head machines: Start with Grit 100 copper and follow with Grit 100 resin. After that continue with Grits 200 copper,

200 resin, 500, 1000, 2000 and Buff.

• 9 head machines: Start with Grit 100 copper and follow with Grit 50 resin. After that continue with Grits 100 resin, 200

copper, 200 resin, 500, 1000, 2000 and Buff.

NOTE: Start at 30psi (2 bars) and increase the pressure by 3psi (0.2 bars) at each consequent step. For example if you start

with Grit 100, you have to set the machine at 30psi (2 bars). For Grit 200 – 33psi (2.3 bars), Grit 500 – 36psi (2.5 bars), Grits

1000– 39psi (2.7 bars), 2000 – 42psi (2.9 bars) and BUFF – 45psi (3.1 bars).

Previously marketed and known as TORO-B

POLISHING DISCS

71mosersinks.com

MOSER


CN

C ro

ute

r bits G

lossFire

ProEd

ge

, F, B sink w

he

els c

ore

bits, a

nc

ho

r bits c

uttin

g &

sha

pin

g p

olish

ing

pa

ds, to

ols lip

pa

ge

ba

cke

rs, ad

ap

tors

Item Number Description Grit Bond Attachment Thickness

GF-B-5-0050 GlossFire 5 inch disc, resin bond, 50 grit 50 resin snaillock 8 mm


GF-B-5-0100-CO GlossFire 5 inch disc, copper bond, 100 grit 100 copper snaillock 6 mm






GF-B-5-BUFF GlossFire 5 inch disc, resin bond, BUFF grit BUFF resin snaillock 8 mm

GF-B-5-CHAMFER GlossFire 5 inch disc, resin bond, CHAMFER CHMF resin snaillock 6 mm

GlossFire 5 Inch/125mm Polishing Discs, Resin and Copper

Item Number Description Grit Bond Attachment Thickness









GF-B-6-BUFF GlossFire 6 inch disc, resin bond, BUFF grit BUFF resin snaillock 8 mm

GlossFire 6 Inch/150mm Polishing Discs, Resin and Copper

GlossFire Multi-Edge Polishing SystemPreviously marketed and known as TORO -B

POLISHING DISCS

mosersinks.com

MOSER


GlossFire Flat Edge Polishing System

GlossFire Flat Edge Polishing System (previously marketed and known as TORO-F) is developed exclusively for automated wet-polishing multi-head machines using the snail lock adaptor. It is perfect for machines manufactured by Marmo Meccanica, USG Machinery, Park Industries, Comandulli, Sasso Meccanica, Breton, CMPI and Montresor.

Suggested GlossFire Flat Edge Application Data

Recommended feed speed for our GlossFire discs is 25in/65cm/minute with a pressure of 2 bars (30 psi) and an increase of 0.2 (3 psi) at each step. Start with grit 200 if you have a good cut-off and a five step machine.

Item Number Description Grit Size Bond Thickness

GF-5-0030-CO GlossFire 5 inch disc, copper bond, 30 grit 30 5 inch copper 5 mm







GlossFire 5 Inch/125mm Pre-Polishing Discs, Copper, Snaillock Attachment







GlossFire 6 Inch/150mm Pre-Polishing Discs, Copper, Snaillock Attachment

Previously marketed and known as TORO-F

POLISHING DISCS

73mosersinks.com

MOSER


CN

C ro

ute

r bits G

lossFire

ProEd

ge

, F, B sink w

he

els c

ore

bits, a

nc

ho

r bits c

uttin

g &

sha

pin

g p

olish

ing

pa

ds, to

ols lip

pa

ge

ba

cke

rs, ad

ap

tors


GF-4-0050 GlossFire 4 inch disc, resin bond, 50 grit 50 4 inch resin 8 mm






GF-4-BUFF GlossFire 4 inch disc, resin bond, BUFF grit BUFF 4 inch resin 8 mm

GlossFire 4 Inch/100mm Polishing Discs, Resin, Snaillock Attachment



















GlossFire Flat Edge Polishing SystemPreviously marketed and known as TORO-F

POLISHING DISCS

mosersinks.com

MOSER


Zero Tolerance Cutters

Zero tolerance cutters are ideal for stock removal and cut-out fabrication, and work great on radial arm machines. All cutters are equipped with bearing guide which allows for a precise edging. Available in 5/8-11 or M14 thread, these tools perform excellent on engineered and natural stones and especially on granite.

Item Number EU Item Number Grit Size Bond Attachment

ZT2x2-0050-BR ZT2x2-0050-BR-M14 50 2in x 2in / 50mm x 50mm brazed 5/8-11 or M14



ZT2x2-0050-BR-ROUT ZT2x2-0050-BR-ROUT 50 2in x 2in / 50mm x 50mm brazed Ø22.2mm

ZT2x2-0100-BR-ROUT ZT2x2-0100-BR-ROUT 100 2in x 2in / 50mm x 50mm brazed Ø22.2mm

ZT3x1.25-0050-BR ZT3x1.25-0050-BR-M14 50 3in x 1.25in / 75mm x 32mm brazed 5/8-11 or M14




ZT-M-2x2-036-ROUT ZT-M-2x2-036-ROUT 36 2in x 2in / 50mm x 50mm metal Ø22.2mm

ZT-M-2x2-050-ROUT ZT-M-2x2-050-ROUT 50 2in x 2in / 50mm x 50mm metal Ø22.2mm

Zero Tolerance Cutters, Brazed and Sintered

Above: Metal bond sink wheels

Left: Zero Tolerance Wheels; Note:Superabrasive zero tolerance cutters are one of the most popular sellers in the SA stone line of tooling.

ZERO TOLERANCE CUTTERS

75mosersinks.com

MOSER CN

C ro

ute

r bits TO

RO

, TOR

O-B®, TO

RO

-FLAT sin

k wh

ee

ls co

re b

its, an

ch

or b

its cu

tting

& sh

ap

ing

po

lishin

g p

ad

s, too

ls lipp

ag

e b

ac

kers, a

da

pto

rs


Sink Wheels, Metal Bond

Superabrasive’s sintered (metal bond) sink wheels are the perfect tool for starting the polishing process. They are designed to run smooth and chip-free on natural and engineered stones. These 5/8-11 sintered wheels can be used wet or dry. Do not apply more than 10,000RPM. Excellent performance on radial arm machines.


SW2x2-036 SW2x2-036-M14 36 2in x 2in / 50mm x 50mm metal 5/8-11 or M14





Metal Bond Sink Wheels, 2in x 2in


SW3x1.25-036 SW3x1.25-036-M14 36 3in x 1.25in / 75mm x 32mm metal 5/8-11 or M14





Metal Bond Sink Wheels, 3in x 1.25in















SINK WHEELS

mosersinks.com

MOSER


Sink Wheels, Vacuum Brazed

Vacuum Brazed Sink Wheels are recommended for stock removal and honing scratches on internal radiuses. They can be used on any type of stone. All brazed sink wheels feature center water feed and are available in 5/8-11, ½ Gas or M14 thread. Vacuum-brazed sink wheels with ½ Gas attachments are ideal for CNC applications. They have only one diamond layer and do not change their shape. Consequently, the shape of the internal radius is the same all around. These ½ Gas sink wheels are also a great solution for finishing up the stone edge at the joints.


SW1x2-050-BR SW1x2-050-BR-M14 50 1in x 2in / 25mm x 50mm brazed 5/8-11 or M14



Vacuum Brazed Sink Wheels, 1in x 2in





Vacuum Brazed Sink Wheels, 2in x 2in

SINK WHEELS

77mosersinks.com

MOSER CN

C ro

ute

r bits TO

RO

, TOR

O-B®, TO

RO

-FLAT sin

k wh

ee

ls co

re b

its, an

ch

or b

its cu

tting

& sh

ap

ing

po

lishin

g p

ad

s, too

ls lipp

ag

e b

ac

kers, a

da

pto

rs


Sink Wheels, Resin and Economy Bond for Polishing

Economy Polishing Sink Wheels feature a unique resin bond compound, which combined with a new unique design and a complete range of carefully selected grits guarantees a superb polish. Designed to work equally well on all types of natural and engineered stone, these wheels are a great solution to sink polishing.


SW2x2-0050-E SW2x2-0050-E-M14 50 2in x 2in / 50mm x 50mm resin 5/8-11 or M14







SW2x2-BUFF-E SW2x2-BUFF-E-M14 BUFF 2in x 2in / 50mm x 50mm resin 5/8-11 or M14

Resin Bond Polishing Sink Wheels, Economy Style, 2in x 2in

SINK WHEELS

mosersinks.com

MOSER

78

Our Core Products Other Important ProductsHot Stuff is our thin CA glue with a viscosity (3cps) similar to water and no surface tension. When you have parts that fit exactly together, first get them in position, then run Hot Stuff along the seam. It will wick right in. If you have tight-fitting joints of non-porous material, Hot Stuff thin will give you the best results as it will not create any extra space between the pieces, and since you get the parts aligned before applying this instant glue, you can be sure they will be perfectly in place when the glue cures. You can also use Hot Stuff to stabilize cracks and to seal and strengthen porous materials- even fiberglass

Super T medium gap-filling glue has a viscosity (200-300 cps) similar to syrup. Super T is perfect for gluing somewhat porous materials and pieces which don't fit tightly. Super T cures at a slower speed (10-25 seconds) than Hot Stuff which gives you more positioning time. You can bond wood, metal, rubber, nitrile, composites like carbon fiber and Kevlar, many types of plastics, and more. To bond two parts together, apply Super T to one part and accelerator to the other part, then push together and hold tightly for 30 seconds.

Special T thick ultra gap-filling glue has a viscosity (1150-1500) similar to honey. Special T works great when you use it to bond both porous and non-porous parts, and it can fill large gaps. It is best used to glue parts that are missing pieces or don't fit very well together. The gap-filling capability is very useful when there is a large chunk missing from a surface- filling that space with Special T can preserve the structural integrity and seal the area from moisture and contaminants.

NCF Quick comes in a convenient aerosol can for easy application. This accelerator dramatically decreases curing time and forces the glue to cure when it wouldn't otherwise. NCF Quick stays active for several minutes, so you can spray several pieces at once if you are making multiple bonds. Apply a light mist from 8-12 inches away. The accelerator is meant to flash off instantly, so if you are getting the part wet, you are applying too much. Overapplication can discolor some surfaces, especially light-colored granite. We recommend using NCF Stone for granite and marble.

Super Solvent is the very best product to debond and dissolve CA glue. Just a little bit is usually enough to unstick your hands and remove the CA glue, and it can also be used to remove glue from other surfaces. Super Solvent is safe to use with most paints and finishes, but we recommend always testing on an inconspicuous area first. Unlike most commercial cyanoacrylate debonders, Super Solvent is not acetone-based. It works more quickly than acetone to break down glue, and it is less aggressive with most materials

NCF Stone is an accelerator designed to be used specifically with natural stone such as granite and marble, especially light-colored varieties of granite which are prone to discoloration when other accelerators are over-applied. NCF Stone should still be applied as a light mist- if the stone is becoming visibly wet, too much is being applied. We highly recommend NCF Stone over NCF Quick for use with granite and marble.

We offertwo applicators for our glue. Replacement spouts and caps are called Hot Tips and are available in boxes of 2, 12, and 100. Pro Tips are long, narrow applicators used together with the spout for greater precision.

Hot Stuff

Super T

Special T

NCF Quick

Super Solvent

NCF Stone

Hot Tip Pro Tip

3130 Regional Parkway Unit B Santa Rosa, CA 95403 Tel (800) 786‐0062 Fax (888) 200‐9413

Email: [email protected] Website: www.CAGlue.com

The Hot Stuff Pro Kit is perfect when you don't need a lot of glue but you do need the ability to make different types of bonds (handymen, installers, home users). The kit comes with one 1oz bottle of Hot Stuff, Super T, and Special T as well as a 6oz NCF Quick aerosol accelerator, a 2oz bottle of debonder, and two extra spouts and overcaps. With this kit, you are prepared for nearly any bond.

INSTANT GLUES

osersinks - mosertools.commosertools.com/wp-content/uploads/2018/03/Catalogue2018.pdf · The Weha...

Documents

Transcript of osersinks - mosertools.commosertools.com/wp-content/uploads/2018/03/Catalogue2018.pdf · The Weha...