OPERATING WEIGHT 234,790–254,000 lb BUCKET...

PC1250LC-8, PC1250-8BACKHOE With Tier 3 Engine

NET HORSEPOWER502 kW 672 HP @ 1800 rpm

OPERATING WEIGHTBackhoe: 106500–115249 kg

234,790–254,000 lb

BUCKET CAPACITY (SAE)Backhoe: 3.4 - 6.7 m3

4.4 - 8.8 yd3

Photo may include optional equipment

HY

DR

AU

LIC

EX

CA

VA

TO

R

PC1250LC

PC1250LC-8

2

HYDRAUL IC EXCAVATOR

WALK-AROUND

Easy Maintenance● Easy Cleaning of Cooling UnitFan reverse-rotation function helpskeep radiator and oil cooler clean.

● Centralized Arrangement ofEngine Checkpoints

● Slip-resistant Plates for improvedfoot traction

● Large Handrails, Steps andCatwalk provide easy access to theengine, hydraulic equipment, andcab

● Highly Reliable Electronic DevicesExclusively designed electronic devices have passedsevere testing.• Controllers • Sensors • Connectors• Heat resistant wiring • Circuit breaker

● Boom Foot Hoses are arranged under the boom footto reduce hose bend during operation and extend hoselife.

Productivity Features● Heavy Lift ModeHeavy lift mode increases lifting force by 10%.

● Large Digging ForceHigh operation efficiency with large digging force for severeapplications.

● Two-mode Setting for BoomSwitch selection allows either powerful digging or smoothboom operation.

● Twin Swing Motor System provides excellent swingperformance, even on slopes.

● Large Drawbar Pull and Steering Forceprovide excellent mobility.

● Swing Priority ModeSwing priority mode improves efficiency forloading dump trucks at 90˚ or 180˚ swingangles.

● Shockless BoomSwitch selection reduces chassisvibration after sudden stops.

Excellent Reliability and Durability● Booms and arms are constructed of thick one-piece plates and large castings for extended service life

● Fuel Pre-filters with water separator equippedas standard

● O-ring Face Seals, which have excellent sealingperformance, are used for the hydraulic hoses

● High-pressure In-line FiltrationThe cool-running hydraulic system is protected withthe most extensive filtration system available, includ-ing a high pressure in-line filter for each main pump.

PC1250LC-8

3


Ecology and Economy Features● Komatsu SAA6D170E-5 Engine is EPA Tier 3 Emissions Certified• World’s first cooled EGR system with bypass-assist type electronically controlled venturi

• Offers high power and low fuel consumption, while conforming to EPA Tier 3 emission regulations

• Reduces NOx emissions by approximately 40%• Equipped with an electronically controlled variable speed reversible fan

● Economy Mode Four-level SettingEnables operator to select the appropriate Economy mode level to match production requirement with lowest fuel consumption.

● Reduction of Ambient Noise• Electronically controlled variable speed fan drive• Large hybrid fan• Glasswool type low-noise muffler with noise reducing cover

Working Environment ● Large Comfortable Cab• Low noise and vibration with cab damper mounting• Large-capacity automatic air conditioner • Pressurized cab reduces external dust from entering• OPG top guard level 2 is standard (ISO 10262)

Advanced Monitor Features • Machine condition can be checked withEquipment Management MonitoringSystem (EMMS)

• EMMS provides PM scheduling, error code, and failure diagnostic functions

• Two working modes combine with heavy lift mode for maximum productivity

Photo may include optional equipment.

NET HORSEPOWER502 kW 672 HP @ 1800 rpm

OPERATING WEIGHTBackhoe

106500–115249 kg234,790–254,000 lb

BUCKET CAPACITY (SAE)Backhoe

3.4 - 6.7 m3 4.4 - 8.8 yd3

PC1250LC-8

4


PRODUCTIVITY FEATURES

Komatsu’s “ecot3” engines are designed to

deliver optimum performance under the

toughest of conditions, while meeting the

latest environmental regulations. This engine

is EPA Tier 3, EU Stage 3A and Japan emis-

sions certified. “ecot3” – ecology and

economy combined with Komatsu technology

to create a high performance engine without

sacrificing power or productivity.

Environment-Friendly Clean EngineThe PC1250LC-8, which is equipped with theKomatsu SAA6D170E-5 engine, is USA EPATier 3 and EU stage 3A emission certified.The SAA6D170E-5 engine adopts the world’sfirst cooled EGR system with electronicallycontrolled bypass-assist type venturi. NOxemissions are reduced by 40%, while main-taining high power and low fuel consumption.

Fuel Consumption Reduced Using Economy ModeEnables operator to setEconomy mode to any of fourlevels according to working con-ditions. Production requirementis achieved at lowest possiblefuel consumption.

Electronically Controlled Variable Speed Fan Contributes to Low Fuel Consumption and Low NoiseThe electronic control system sets therotational speed of the cooling fanaccording to coolant, hydraulic oil,and ambient temperatures. It effec-tively uses engine output to reducewasteful fuel consumption andreduces noise during low-speed fanrotation.

Reduction of Ambient NoiseIn addition to the electronically-controlled variable-speedfan drive, noise levels are further reduced with a low-noisemuffler with cover, hybrid fan, low-noise components, andsound absorbing padding installed throughout the machine.

The above image is a 3D illustration and may differfrom actual engine.

5

HYDRAUL IC EXCAVATORPC1250LC-8

Working Mode Application Advantage

Power ● Maximum production/powerP Mode ● Fast cycle time

E Economy ● Good cycle timeMode ● Improved fuel economy

Working Mode SelectionPower and Economy ModeThe PC1250LC-8 excavator is equipped with two working

modes. Each mode is designed to match engine speed,

pump flow, and system pressure to the current application,

giving the operator flexibility to match equipment

performance to the job at hand.

(E0,E1,E2,E3)

Heavy Lift ModeGives the operator 10% more lifting force on the boom whenneeded for handling large rock or heavy lifting applications.

Swing Priority SettingThe swing priority setting allows the operator to use thesame easy motion for 180˚ loading as 90˚ loading operations. By proportioning the oil flow, this setting allowsthe operator to select either boom or swing as the priorityfor increased production.

Large Digging ForceWith its high engine output and efficient hydraulic system,the PC1250LC-8 demonstrates powerful digging force.

Max. arm crowd force (SAE): 392 kN 44.1 US tonMax. bucket digging force (SAE): 422 kN 47.4 US ton

Large Drawbar Pull and Steering ForceSince the machine has large drawbar pull and high steeringforce, it demonstrates excellent mobility even when operated on inclined sites.

Two-Mode Setting for BoomSmooth mode provides easy operation for gathering blasted rock and scraping operations. When maximum digging force is needed, switch to Power mode for moreeffective excavating.

Shockless Boom ControlThe PC1250LC-8 features a shockless boom control (dou-ble-check slow return valve) which automatically reducesthe amount of vibration present when operating the boom.Operator fatigue is reduced and spillage caused by vibrationis minimized.

Smoothmode

Boom raisePowermode

Extend andretract

Power Mode

Economy Mode

Heavy Lift Mode

Swing Priority Mode

RELIABILITY FEATURESPC1250LC-8 HYDRAUL IC EXCAVATOR

6

Excellent Reliability and DurabilityBoom Foot HosesThe boom foot hoses are arrangedunder the boom foot to reduce hosebend during operation and extendinghose life.

Metal Guard RingsMetal guard rings protect all thehydraulic cylinders and improve reliability.

Sturdy guards shield the travel motorsand piping from rock damage.

High-Pressure In-line FiltrationThe PC1250LC-8 has the most exten sive filtration system available,pro viding in-line filters as standardequipment. An in-line high pressure filter in the outlet port of each mainhydraulic pump reduces failurescaused by contamination.

Track roller guard (full length)(PC1250-8 option)

O-Ring Face SealHydraulic hose seals have beenchanged from a conventional taper seal to an O-ring seal. This provides improved long-term sealing performance.

Fuel Pre-Filters(with Water Separator)Removes water and contaminantsfrom fuel to enhance fuel system reliability.

Sturdy UndercarriageThe undercarriage is strengthened toprovide excellent reliability and durability when working on rockyground or blasted rock.

Heat-Resistant WiringHeat-resistant wiring is utilized for theengine electrical circuits and othermajor component circuits.

Circuit BreakerWith the standard circuit breaker, themachine can be easily restarted afterrepair.

DT-Type ConnectorsDT-type connectors seal tight and

have high reliability.

Strengthened Boom and ArmWith large cross-sectional structures,thick high tensile strength steelplates, and partition walls, the boomand arm structures exhibit excellentdurability and are highly resistant tobending and torsional stress.

Large cross sectionalstructure boom

Partitionwall

Partitionwall

Wide widtharm

Tough Strengthened FrameStructureStrengthened revolving frame, centerframe and crawler frames withstandsevere applications with excellentdurability.

FEM stressanalysis

Metal guard ring(Cast iron ring)

Piston ring

Wear ring



7

Large Comfortable CabComfortable Cab

The PC1250LC-8’s cab offers an exceptionally comfortable

operating environment. The large cab enables full flat

reclining of the seat back with headrest.

Pressurized Cab

The automatic air conditioner, air filters and a higher internal

air pressure (6.0 mm Aq 0.2" Aq) reduces external dust

from entering the cab.

Low Noise Design

Both engine noise and swing and hydraulic relief noise are

remarkably reduced.

Low Vibration with Cab Damper Mounting

The PC1250LC-8 uses a new, improved cab damper mount

system that incorporates longer stroke and the addition of

a spring. The new cab damper mounting, combined with a

strengthened left and right side deck, aids vibration

reduction at the operator’s seat.

Vibration at the floor is reduced from 120 dB (VL) to

115 dB (VL).

dB (VL) is an index for expressing size of vibration.

Rubber

Silicon Oil

Spring


Sliding Window On Left Side of Cab

The cab interior is spacious and provides a comfortable working environment…

Automatic Air Conditioner

A 6900 kcal 27,400 Btu

automatic air conditioner is

standard. The bi-level

control function keeps the

operator's head and feet

cool and warm respectively.

This improved air flow

function keeps the inside of

the cab comfortable

throughout the year.

WORKING ENVIRONMENT

Washable Cab Floormat

The PC1250LC-8’s cab floormat is easy to keep clean. The gen-tly inclined surface has aflanged floormat and drainageholes to facilitate runoff.

PC1250LC-8 HYDRAUL IC EXCAVATOR

General FeaturesStep light with timer

provides light for about one

minute to allow the operator to

exit the machine after operation.

Pump/engine room partition

Separates the engine room from

the hydraulic compartment.

Thermal and fan guards are

placed around high-temperature

parts of the engine and fan drive.

Slip-resistant plates

Serrated plates on working

surfaces provide improved

foot traction.

Slip-resistant plates

Horn interconnected with

warning light gives visual and

audible notice for directing

trucks or other communication.


Multi-Position Control

The multi-position, Propor tional Pressure Control

(PPC) levers allow the operator to work in

comfort while maintaining precise control. A double-

slide mechanism allows the seat and control levers

to move together or inde pen dently, allowing the

operator to position the controls for maximum

productivity and comfort.

Seat Sliding Amount: 340 mm 13.4"

Seat with headrest reclined full flat

Cab Frame Mounted Wiper Bottle Holder and Magazine Rack

Defroster

8


9

EASY MAINTENANCEKomatsu Designed the PC1250LC-8 for Easy Service Access

Wide Catwalk, Large Steps andHandrailsEasier, safer operator cab access andmaintenance checks.

Easy Checking and Maintenance Wide center walkway provides easyaccess to most inspection and mainte-nance points. In addition, inspectionand maintenance points are grouped tofacilitate easy engine and hydrauliccomponent checks.

Reduced MaintenanceCostsHydraulic oil filter replace-

ment is extended from 500

to 1000 hours.

Easy Cleaning of RadiatorThe hydraulically driven fan can bereversed from the cab to facilitatecleaning of the cooling unit. In addition,this feature can be used to reducewarm-up time in low temperatures.

ConvenientUtility SpaceUtility space

provides great

convenience

to store tools,

coveralls,

filters, etc.

B

C

D

1

2

3

4 5

6

Swing machinery(Swing motors)

Cab

Fuel tank

Pumps

Engine

Hydraulictank

Hydraulicdriven fan

Control valves

After cooler

Oil cooler

RadiatorAir−operatedgrease gun

Util

ity s

pace

B

C

D

E

Swing transmission oil

Hydraulic oil

Engine oil

PTO oil

A Coolant Corrosion resister

Fuel filters

Hydraulic drain filter

Pilot filter

Hydraulic return filtersEngine oil filters

1

2

3

4

5

6

Electric priming pumpBleeding air from fuel system is easilyaccomplished with the electric primingpump.

Electricprimingpump switch

Dust Indicator with 5-step IndicationInforms of air cleaner clogging in 5 steps to warn of filter condition.



High-Quality EMMS Self-diagnostic System• Abnormality Checking FunctionIf an abnormality should occur, the monitoring system checkswhether hydraulic pressures, solenoid ON/OFF status, enginespeed, electrical connections, etc. are within normal operatingrange.• Maintenance History Memory FunctionMaintenance records such as replacement of engine oil,hydraulic oil, filters, can be stored. Operator is warned whenservice is due.• Trouble Data Memory FunctionTrouble data is stored to serve as reference for future trouble-shooting. Error codes are displayed to aid in service diagnosis.

KOMTRAX PlusAs part of a complete service and support program, Komatsu equips every mining and quarry sized machine withKOMTRAX Plus. By using a satellite-based communicationsystem, KOMTRAX Plus offers a new vision of monitoring your valuable assets by providing insight to critical operating metricsand information that can be used to increase availability, lower owning and operating costs and maximize fuel efficiency.

The KOMTRAX Plus information available on MyKomatsu.comallows service personnel and asset owners to review cautions,operational data, fuel consumption, payloads and key component measurements provided in forms of trends. WithKOMTRAX Plus, knowledge becomes the power to fuel yourproductivity.

10


11

PC1250-8 PC1250LC-8

Operating Ground Operating GroundShoes Weight Pressure Weight Pressure

Double grouser 106500 kg 1.39 kgf/cm2

700 mm 28" 234,790 lb 19.8 psi — —

Double grouser 108810 kg 0.99 kgf/cm2 113500 kg 0.88 kgf/cm2

1000 mm 39.4" 239,880 lb 14.1 psi 250,154 lb 12.5 psi

Double grouser 115249 kg 0.75 kgf/cm2

1200 mm 47.25" — — 254,000 lb 10.7 psi

SPECIFICATIONSDRIVES AND BRAKES

Steering control . . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedalsDrive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydrostaticTravel motor . . . . . . . . . . . . . . . . . . Axial piston motor, in-shoe designReduction system . . . . . . . . . . . . . . . . . . . Planetary double reductionMaximum drawbar pull . . . . . . . . . . . . . . 686 kN 70000 kg 154,320 lbGradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70%Maximum travel speed: High . . . . . . . . . . . . . . . . . 3.2 km/h 2.0 mph

Low. . . . . . . . . . . . . . . . . . 2.1 km/h 1.3 mphService brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock

UNDERCARRIAGE

Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-leg frameTrack frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-sectionTrack type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SealedTrack adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HydraulicNo. of shoesStandard, SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 each sideLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 each side

No. of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 each sideNo. of track rollersStandard, SP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 each sideLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 each side

COOLANT AND LUBRICANT

CAPACITY (REFILLING)

Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1360 ltr 359.3 US galRadiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 ltr 37.5 US galEngine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 ltr 22.7 US galFinal drive, each side. . . . . . . . . . . . . . . . . . . . . . . . . 21 ltr 5.5 US galSwing drive . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 24.3 ltr 2 x 6.4 US galHydraulic tank . . . . . . . . . . . . . . . . . . . . . . . . . . . 670 ltr 177.0 US galPTO. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5 ltr 3.6 US gal

OPERATING WEIGHT (APPROXIMATE)

BACKHOEPC1250-8: 9100 mm 29'10" boom, 3400 mm 11'2" arm, SAEheaped 5.0 m3 6.5 yd3 backhoe bucket, operator, lubricant, coolant,full fuel tank, and standard equipment.

PC1250LC-8: 9100 mm 29'10" boom, 3400 mm 11'2" arm, SAEheaped 5.0 m3 6.5 yd3 backhoe bucket, operator, lubricant, coolant,full fuel tank, and standard equipment.

ENGINE

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA6D170E-5Type. . . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injectionAspiration . . . . . . . . . . . . . . . Turbocharged, aftercooled, cooled EGRNumber of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 mm 6.69"Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 mm 6.69"Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . 23.15 ltr 1413 in3Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, electronicHorsepowerSAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . . . Gross 514 kW 688 HPISO 9249 / SAE J1349 . . . . . . . . . . . . . . . . . . Net 502 kW 672 HPHydraulic fan at maximum speed . . . . . . . . . . Net 463 kW 620 HP

Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 rpmFan drive type. . . . . . . . . . . . . . . Hydraulic, variable speed, reversible

EPA Tier 3 and EU stage 3A emission certified.

HYDRAULIC SYSTEM

Type . . . . . . . . . . . . . . . . . . . . . . . . Open-center load sensing systemNumber of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . . 2

Main pumps:Type . . . . . . . . . . . . . . . . . . . . . . . . Variable capacity piston pumpsPumps for . . . . . . . . . Boom, arm, bucket, swing, and travel circuits

Maximum flow:For implement and travel . . . . . 2 x 494 ltr/min 2 x 130.5 U.S. gpmFor swing . . . . . . . . . . . . . . . . . 1 x 600 ltr/min 1 x 158.5 U.S. gpm

Sub-pump for control circuit . . . . . . . . . . . . . . . . . . . . . . . . Gear pump

Hydraulic motors:Travel . . . . . . . . . . . . . . . 2 x axial piston motors with parking brake Swing. . . . . . . . . . 2 x axial piston motors with swing holding brake

Relief valve setting:Implement circuits . . . . . . . . . . . . 31.4 MPa 320 kg/cm2 4,550 psiTravel circuit . . . . . . . . . . . . . . . . . 34.3 MPa 350 kg/cm2 4,980 psiSwing circuit. . . . . . . . . . . . . . . . . 27.0 MPa 275 kg/cm2 3,910 psiPilot circuit . . . . . . . . . . . . . . . . . . . 2.9 MPa 30 kg/cm2 430 psi

Hydraulic cylinders:Number of cylinders—bore x strokeBackhoeBoom . . . . . . . . . . . . . . . . . 2 – 225 mm x 2390 mm 8.9" x 94.1"Arm. . . . . . . . . . . . . . . . . . . 1 – 250 mm x 2435 mm 9.8" x 95.9"BucketStd . . . . . . . . . . . . . . . . . 2 – 160 mm x 1825 mm 6.3" x 71.8"SP . . . . . . . . . . . . . . . . . 2 – 160 mm x 1950 mm 6.3" x 76.8"

SWING SYSTEM

Driven by . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x hydraulic motorsSwing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gearSwing circle lubrication. . . . . . . . . . . . . . . . . . . . . . . . . Grease bathedSwing lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brake Swing speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 rpm

PC1250-8/PC1250LC-8 PC1250SP-8

9.1 m 29'10" boom 7.8 m 25'7" boom

3.4 m 11'2" arm 4.5 m 14'9" arm 5.7 m 18'8" arm 3.4 m 11'2" arm

A Max. digging height 13400 mm 44'0" 13490 mm 44'3" 13910 mm 45'8" 13000 mm 42'8"

B Max. dumping height 8680 mm 28'6" 9000 mm 29'6" 9440 mm 31'0" 8450 mm 27'9"

C Max. digging depth 9350 mm 30'8" 10440 mm 34'3" 11590 mm 38'0" 7900 mm 25'11"

D Max. vertical walldigging depth 7610 mm 25'0" 8490 mm 27'10" 9480 mm 31'1" 5025 mm 16'6"

E Max. digging depthof cut for 8' level 9220 mm 30'3" 10340 mm 33'11" 11500 mm 37'9" 7745 mm 25'5"

F Max. digging reach 15350 mm 50'4" 16340 mm 53'7" 17450 mm 57'3" 14070 mm 46'2"

G Max. digging reachat ground level 15000 mm 49'3" 16000 mm 52'6" 17130 mm 56'2" 13670 mm 44'10"

H Min. swing radius 7965 mm 26'2" 7990 mm 26'3" 8150 mm 26'9" 6415 mm 21'1"

Bucket digging force (SAE) 422 kN 422 kN 343 kN 502 kN43000 kgf / 94,800 lb 43000 kgf / 94,800 lb 35000 kgf / 77,160 lb 51200 kgf / 112,900 lb

Arm crowd force (SAE) 392 kN 327 kN 281 kN 395 kN40000 kgf / 88,180 lb 33300 kgf / 73,410 lb 28700 kgf / 63,270 lb 40300 kgf / 88,860 lb

Bucket digging force (ISO) 479 kN 479 kN 389 kN 570 kN48800 kgf / 107,590 lb 48800 kgf / 107,590 lb 39700 kgf / 87,520 lb 58100 kgf / 128,110 lb

Arm crowd force (ISO) 412 kN 337 kN 286 kN 412 kN42000 kgf / 92,590 lb 34400 kgf / 75,840 lb 29200 kgf / 64,375 lb 42000 kgf / 92,590 lb


12

WORKING RANGEWORKING RANGE

H

GF

2

1

3

0

4

5

6

7

8

9

10

11

12

13

14

−1

−2

−3

−4

−5

−6

−7

−8

−9

−10

−11

−12

0 1 2 3 4 5 6 7 8 9101112131415161718

A

C E

B

D

8ft


13

BACKHOE DIMENSIONS

BACKHOE BUCKET, ARM, AND BOOM COMBINATION

PC1250-8/PC1250LC-8 PC1250SP-8

9.1 m 29'10" boom 7.8 m 25'7" boom

3.4 m 11'2" arm 4.5 m 14'9" arm 5.7 m 18'8" arm 3.4 m 11'2" arm

A Overall Height 6040 mm 19'10" 6460 mm 21'2" 6990 mm 22'11" 6265 mm 20'7"

B Overall Length 16020 mm 52'7" 16050 mm 52'8" 15840 mm 52'0" 14790 mm 48'6"

These charts are based on over-side stability with fully loaded bucket at maximum reach.�: General purpose use, density up to 2.1 t/m3 3,500 lb/yd3 □: General purpose use, density up to 1.8 t/m3 3,000 lb/yd3

�: General purpose use, density up to 1.5 t/m3 2,500 lb/yd3 —: Not useable

BUCKET CAPACITY (HEAPED) WIDTH

Without Side With Side WEIGHTSAE, PCSA CECE cutters or shrouds cutters or shrouds (with side cutters) ARM LENGTHm3 yd3 m3 yd3 mm in mm in kg lb m ft in

PC1250LC-8/ PC1250-8 (use with 9.1 m 29'10" boom) 3.4 11'2" 4.5 14'9" 5.7 18'8"

3.4 4.4 3.0 3.9 1500 59" 1670 65.7" 3600 7,940 — � □

4.0 5.2 3.5 4.6 1710 67.3" 1880 74" 3800 8,380 � □ �

5.0 6.5 4.3 5.6 2050 80.7" 2220 87.4" 4400 9,700 □ � —5.2 6.8 4.5 5.9 2050 80.7" 2110 83.1" 5100 11,240 □ � —

PC1250SP-8 (use with 7.8 m 25'7" boom) 3.4 11'2" — —

6.7 8.8 5.9 7.7 2280 69.8" 2340 92.1" 6300 13,890 □ — —

(R=4870 16'0")

A

B4810 15'9"

4995 16'5"

6425 21'1"

50 2

"17

905'

10"

3925

12'

11"

3470 11'5"

700 28"

3900 12'10"

990

3'3"

2240 7'4"

4600 15'1"

5355 17'7"

4965 16'3"

4120

13'

6"

4075

13'

4"51

80 1

7'0"

5970 19'7"(LC)

7400 24'3"(LC)

1000 39.4"(LC)

4900 16'1"(LC)

5265 17'3"(LC)

Unit: mm ft.in.

PC1250LC-8Equipment:● Boom: 9.1 m 29'10"● Arm: 3.4 m 11'2"● Bucket: 5.0 m3 6.5 yd3● Bucket weight: 4580 kg10,097 lb

● Track shoe width: 1200 mm47.2"

● 10-roller track frame● Heavy lift mode “on”

A: Reach from swing centerB: Bucket hook heightC: Lifting capacityCf: Rating over frontCs: Rating over side: Rating at maximum reach


● Track shoe width: 1000 mm

39.4"● 10-roller track frame● Heavy lift mode “on”


PC1250LC-8

14


LIFTING CAPACITY

Unit: kg lb

A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *15200 *15200 *18000 *1800030' *33,500 *33,500 *39,700 *39,7006.1 m *15950 14100 *20050 18500 *22950 22950 *27900 *2790020' *35,100 31,100 *44,200 40,800 *50,600 50,600 *61,500 *61,5003.0 m *18300 12750 19950 13400 *22900 17200 *27500 22200 *34950 2935010' *40,300 28,100 43,900 29,600 *50,500 37,900 *60,600 48,900 *77,100 64,7000.0 m *21000 13250 *24600 16300 *28550 19550 *37400 277500' *46,300 29,200 *54,200 35,900 *63,000 43,100 *82,400 61,200

–3.0 m *22700 16300 *22800 16350 *28550 20850 *35300 27950 *43850 40750 *39250 *39250–10' *50,100 36,000 *50,200 36,100 *62,900 46,000 *77,800 61,700 *96,700 89,900 *86,600 *86,600–6.1 m *23500 *23500 *25400 *25400 *32550 *32550–20' *51,800 *51,800 *56,100 *56,100 *71,800 *71,800

B

A

C

Unit: kg lb

A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *15200 *15200 *18000 *1800030' *33,500 *33,500 *39,700 *39,7006.1 m *15950 14350 *20050 18800 *22950 *22950 *27900 *2790020' *35,100 31,700 *44,200 41,400 *50,600 *50,600 *61,500 *61,5003.0 m *18300 13000 *19950 13650 *22900 17450 *27500 22550 *34950 2975010' *40,300 28,700 *43,900 30,100 *50,500 38,500 *60,600 49,700 *77,100 65,6000.0 m *21000 13500 *24600 16550 *28550 19900 *37400 282000' *46,300 29,800 *54,200 36,500 *63,000 43,900 *82,400 62,200

–3.0 m *22700 16600 *22800 16650 *28550 21200 *35300 28400 *43850 41350 *39250 *39250–10' *50,100 36,600 *50,200 36,700 *62,900 46,700 *77,800 62,600 *96,700 91,200 *86,600 *86,600–6.1 m *23500 *23500 *25400 *25400 *32550 *32550–20' *51,800 *51,800 *56,100 *56,100 *71,800 *71,800

B

A

C





Unit: kg lb

* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.

A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *9300 *930030' *20,500 *20,5006.1 m *9650 *9650 *16650 14600 *18150 *18150 *20550 *2055020' *21,300 *21,300 *36,700 32,200 *40,000 *40,000 *45,400 *45,4003.0 m *10950 *10950 *18700 13650 *21450 17450 *25600 22650 *32350 3020010' *24,200 *24,200 *41,300 30,100 *47,300 38,500 *56,500 49,900 *71,400 66,6000.0 m *13650 11250 *20250 12900 *23900 16250 *28000 19850 *36600 27800 *29300 *293000' *30,100 24,800 *44,700 28,400 *52,600 35,800 *61,700 43,800 *80,700 61,300 *64,600 *64,600

–3.0 m 20150 13350 *23850 15900 *29200 20400 *36300 27400 *46350 39800 *31900 *31900–10' 44,400 29,400 *52,600 35,000 *64,400 45,000 *80,100 60,400 *102,200 87,800 *70,300 *70,300–6.1 m *21750 19950 *23650 21300 *28850 26850 *38200 *38200 *48,900 *48,900–20' *48,000 44,000 *52,100 47,000 *63,600 59,200 *84,300 *84,300 *107,800 *107,800

B

A

C



15






Unit: kg lb

A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *9300 *930030' *20,500 *20,5006.1 m *9650 *9650 *16650 14850 *18150 *18150 *20550 *2055020' *21,300 *21,300 *36,700 32,800 *40,000 *40,000 *45,400 *45,4003.0 m *10950 *10950 *18700 13900 *21450 17750 *25600 23000 *32350 3065010' *24,200 *24,200 *41,300 30,600 *47,300 39,100 *56,500 50,700 *71,400 67,5000.0 m *13650 11500 *20250 13100 *23900 16550 *28000 20200 *36600 28250 *29300 *293000' *30,100 25,300 *44,700 28,900 *52,600 36,400 *61,700 44,500 *80,700 62,300 *64,600 *64,600

–3.0 m *19400 13600 *23850 16150 *29200 20750 *36300 27800 *46350 40450 *31900 *31900–10' *42,700 30,000 *52,600 35,700 *64,400 45,700 *80,100 61,300 *102,200 89,100 *70,300 *70,300–6.1 m *21750 20300 *23650 21650 *28850 27300 *38200 *38200 48,900 *48,900–20' *48,000 44,700 *52,100 47,800 *63,600 60,200 *84,300 *84,300 *107,800 *107,800

B

A

C

LIFTING CAPACITY


● Track shoe width: 1000 mm39.4"

● 10-roller track frame● Heavy lift mode “on”


Unit: kg lb

A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *5900 *590030' *13,000 *13,0006.1 m *6050 *6050 *14950 *1495020' *13,400 *13,400 *32,900 *32,9003.0 m *6800 *6800 *17400 14050 *19800 17950 *23450 23400 *29300 *29300 *39750 *3975010' *15,000 *15,000 *38,300 31,000 *43,700 39,600 *51,700 51,500 *64,600 *64,600 *87,600 *87,6000.0 m *8400 *8400 *19500 13000 *22850 16400 *27700 21100 *35100 28150 *31200 *312000' *18,500 *18,500 *43,000 28,600 *50,400 36,200 *61,100 46,600 *77,400 62,000 *68,800 *68,800

–3.0 m *11500 11,000 *20050 12500 *24000 15650 *29250 20150 *36600 27000 *47600 39150 *26750 *26750–10' *25,400 24,300 *44,200 27,600 *63,000 34,500 *64,500 44,400 *80,700 59,600 *104,900 86,300 *59,000 *59,000–6.1 m *19400 15150 *21050 16050 *26600 20450 *33250 27500 *42350 40200 *47950 *47950–20' *42,800 33,400 *46,500 35,400 *58,700 45,100 *73,300 60,700 *93,300 88,600 *105,700 *105,700

B

A

C





Unit: kg lb


A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *5900 *590030' *13,000 *13,0006.1 m *6050 *6050 *14950 *1495020' *13,400 *13,400 *32,900 *32,9003.0 m *6800 *6800 *17400 14300 *19800 18250 *23450 *23450 *29300 *29300 *39750 *3975010' *15,000 *15,000 *38,300 31,500 *43,700 40,200 *51,700 *51,700 *64,600 *64,600 *87,600 *87,6000.0 m *8400 *8400 *19500 13250 *22850 16700 *27700 21450 *35100 28550 *31200 *312000' *18,500 *18,500 *43,000 29200 *50,400 36,800 *61,100 47,300 *77,400 63,000 *68,800 *68,800

–3.0 m *11500 11250 *20050 12750 *24000 15950 *29250 20500 *36600 27450 *47600 39750 *26750 *26750–10' *25,400 24,800 *44,200 28,100 *63,000 35,200 *64,500 45,200 *80,700 60,500 *104,900 87,600 *59,000 *59,000–6.1 m *19200 15400 *21050 16350 *26600 20800 *33250 27950 *42350 40800 *47950 *47950–20' *42,300 34,000 *46,500 36,100 *58,700 45,900 *73,300 61,600 *93,300 89,900 *105,700 *105,700

B

A

C



PC1250LC-8

16


LIFTING CAPACITY

PC1250-8Equipment:● Boom: 9.1 m 29'10"● Arm: 3.4 m 11'2"● Bucket: 5.0 m3 6.5 yd3● Bucket weight: 4400 kg9,700 lb


28"● 8-roller track frame


B

A

C

Heavy Lift Off

A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'

B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *15200 *15200 *18000 *1800030' *33,500 *33,500 *39,700 *39,7006.1 m *15950 13200 *20050 17400 *22950 *22950 *27900 *2790020' *35,100 29,100 *44,200 38,400 *50,600 *50,600 *61,500 *61,5003.0 m 15650 11850 16400 12500 20850 16100 27000 20850 *34950 2765010' 34,500 26,200 36,100 27,500 46,000 35,500 59,500 46,000 *77,100 60,9000.0 m 16250 12300 19950 15200 24200 18200 34400 261000' 35,900 27,100 44,000 33,500 53,400 40,200 75,800 57,500

–3.0 m 19950 15250 20000 15250 25600 19550 34600 26300 *43850 38400 *39250 *39250–10' 44,000 33,600 44,100 33,700 56,400 43,100 76,300 57,900 *96,700 84,700 *86,600 *86,600–6.1 m *23500 *23500 *25400 *25400 *32550 *32550–20' *51,800 *51,800 *56,100 *56,100 *71,800 *71,8009.1 m *15200 *15200 *15500 *1550030' *33,500 *33,500 *34,200 *34,2006.1 m *15850 13200 *17300 *17300 *19950 *19950 *24400 *2440020' *34,900 29,100 *38,100 *38,100 *44,000 *44,000 *53,800 *53,8003.0 m 15650 11850 16400 12500 *19800 16100 *23900 20850 *30550 2765010' 34,500 26,200 36,100 27,500 *43,700 35,500 *52,700 46,000 *67,400 60,9000.0 m 16250 12300 19950 15200 24200 18200 *32650 261000' 35,900 27,100 44,000 33,500 53,400 40,200 *72,000 57,500

–3.0 m *19600 15250 *19650 15250 *24750 19550 *30750 26300 *38350 *38350 *39250 *39250–10' *43,200 33,600 *43,300 33,700 *54,600 43,100 *67,800 57,900 *84,500 *84,500 *86,600 *86,600–6.1 m *20150 *20150 *21900 *21900 *28150 *28150–20' *44,500 *44,500 *48,200 *48,200 *62,100 *62,100


Unit: kg lb





A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *9300 *930030' *20,500 *20,5006.1 m *9650 *9650 *16650 13700 *18150 18000 *20550 *2055020' *21,300 *21,300 *36700 30,200 *40,000 39,700 *45,400 *45,4003.0 m *10950 10200 16650 12750 21200 16400 *25600 21300 *32350 2850010' *24,200 22,500 36,700 28,100 46,700 36,100 *56,500 47,000 *71,400 62,8000.0 m *13650 10400 15850 11950 19900 15150 24550 18500 34,450 26100 *29300 *293000' *30,100 23,000 34,900 26,400 43,900 33,400 54,100 40,800 75,900 57,600 *64,600 *64,600

–3.0 m 16400 12400 19550 14800 25100 19050 34000 25700 *46350 37500 *31900 *31900–10' 36,200 27,300 43,100 32,600 55,400 42,000 75,000 56,600 *102,200 82,600 *70,300 *70,300–6.1 m *21750 18700 *23650 20000 *28850 25200 *38200 *38200 *48900 *48900–20' *48,000 41,300 *52,100 44,100 *63,600 55,500 *84,300 *84,300 *107,800 *107,8009.1 m *9300 *930030' *20,500 *20,5006.1 m *9650 *9650 *14250 13700 *15600 *15600 *17850 *1785020' *21,300 *21,300 *31,400 30,200 *34,400 *34,400 *39,300 *39,3003.0 m *10950 10200 *16050 12750 *18500 16400 *22250 21300 *28250 *2825010' *24,200 22,500 *35,400 28,100 *40,800 36,100 *49,000 47,000 *62,300 *62,3000.0 m *13650 10400 15850 11950 19900 15150 *24200 18500 *31950 26100 *29300 *293000' *30,100 23,000 34,900 26,400 43,900 33,400 *53,300 40,800 *70,400 57,600 *64,600 *64,600

–3.0 m 16400 12400 19550 14800 25100 19050 *31650 25700 *40550 37500 *31900 *31900–10' 36,200 27,300 43,100 32,600 55,400 42,000 *69,800 56,600 *89,400 82,600 *70,300 *70,300–6.1 m *18650 18650 *20300 20000 *24800 24800 *33200 *33200 *42600 *42600–20' *41,100 41,100 *44,800 44,100 *54,700 54,700 *73,200 *73,200 *93,900 *93,900


Unit: kg lb

B

A

C

Heavy Lift On

Heavy Lift Off

Heavy Lift On

17


LIFTING CAPACITY





Unit: kg lb


A Maximum 13.7 m 45' 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20'B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *5900 *590030' *13,000 *13,0006.1 m *6050 *6050 *11050 10950 *14950 1435020' *13,400 *13,400 *24,300 24,100 *32,900 31,6003.0 m *6800 *6800 13550 10250 17050 13100 *19800 16900 *23450 22050 *29300 *29300 *39750 *3975010' *15,000 *15,000 29,900 22,600 37,600 28,900 *43,700 37,200 *51,700 48,600 *64,600 *64,600 *87,600 *87,6000.0 m *8400 *8400 12850 9600 15950 12050 20,100 15300 25900 19800 34800 26450 *31200 *312000' *18,500 *18,500 28,400 21,100 35,200 26,600 44,300 33,800 57,100 43,600 76,700 58,300 *68,800 *68,800

–3.0 m *11500 10150 15500 11600 19300 14600 24850 18800 33600 25300 *47600 36800–10' *25,400 22,400 34,100 25,600 42,600 32,100 54,800 41,500 74,100 55,800 *105,000 81,100–6.1 m 18600 14100 19750 15000 25200 19150 *33250 25850 *42350 37850–20' 41,000 31,100 43,500 33,000 55,600 42,200 *73,300 56,900 *93,300 83,4009.1 m *5900 *590030' *13000 *130006.1 m *6050 *6050 *11050 10950 *12700 *1270020' *13,400 *13,400 *24,300 24,100 *28,000 *28,0003.0 m *6800 *6800 *13350 10250 *14850 13100 *17050 16900 *20300 *20300 *25550 *25550 *34850 *3485010' *15,000 *15,000 *29,500 22,600 *32,800 28,900 *37,600 37,200 *44,800 *44,800 *56,300 *56,300 *76,800 *76,8000.0 m *8400 *8400 12850 9600 15950 12050 *19700 15300 *24000 19800 *30600 26450 *31200 *312000' *18,500 *18,500 28,400 21,100 35,200 26,600 *43,400 33,800 *53,000 43,600 *67,500 58,300 *68,800 *68,800

–3.0 m *11500 10150 15500 11600 19300 14600 24850 18800 *31900 25300 *41650 36600–10' *25,400 22,400 34,100 25,600 42,600 32,100 54,800 41,500 *70,300 55,800 *91,800 81,100–6.1 m *16550 14100 *18050 15000 *22950 19150 *28850 25850 *36900 *36900–20' *36,500 31,100 *39,800 33,000 *50,600 42,200 *63,600 56,900 *81,300 *81,300

B

A

C


PC1250SP-8Equipment:● Boom: 7.8 m 25'7"● Arm: 3.4 m 11'2"● Bucket: 6.7 m3 8.8 yd3● Bucket weight: 6300 kg13,890 lb

● Track shoe width: 700 mm28"

● 8-roller track frame


A Maximum 12.2 m 40' 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15'B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs9.1 m *11700 *11700 *17050 *1705030' *25,800 *25,800 *37,600 *37,6006.1 m *12250 *12250 *16300 16100 *24350 22600 *28750 *28750 *36350 *3635020' *27,000 *27,000 *35,900 35,600 *53,700 49,800 *63,400 *63,400 *80,100 *80,1003.0 m *14600 13700 20150 15300 26950 20750 *33850 27000 *47450 4115010' *32,200 30,200 44,400 33,800 59,500 45,700 *74,700 59,600 *104,600 90,7000.0 m 19300 14550 19400 14600 25600 19450 31750 23500 *48750 386500' 42,600 32,000 42,800 32,200 56,400 42,900 70,000 51,800 *107,500 85,200

–3.0 m *23900 19550 *23950 19550 *30750 24850 *41450 39,250 *52450 *52450–10' *52,700 43,100 *52,900 43,100 *67,800 54,800 *91,300 86,500 *115,700 *115,700–6.1 m *23500 *23500 *25400 *25400 *32550 *32550–20' *51,800 *51,800 *56,000 *56,000 *71,700 *71,7009.1 m *11700 *11700 *17050 *1705030' *25,800 *25,800 *37,600 *37,6006.1 m *12250 *12250 *16300 16100 *21150 *21150 *25150 *25150 *32100 *3210020' *27,000 *27,000 *35,900 35,600 *46,600 *46,600 *55,500 *55,500 *70,800 *70,8003.0 m *14600 13700 20150 15300 *24450 20750 *29450 27000 *41750 4115010' *32,200 30,200 44,400 33,800 *54,000 45,700 *65,000 59,600 *92,000 90,7000.0 m 19300 14550 19400 14600 25600 19450 *29900 23500 *42750 386500' 42,600 32,000 42,800 32,200 56,400 42,900 *65,900 51,800 *94,300 85,200

–3.0 m *20500 19550 *20550 19550 *26450 24850 *36100 *36100 *45800 *45800–10' *45,200 43,100 *45,300 43,100 *58,300 54,800 *79,600 *79,600 100,800 100,800–6.1 m *23500 *23500 *25400 *25400 *32550 *32550–20' *51,800 *51,800 *56,000 *56,000 *71,700 *71,700

Unit: kg lb

B

A

C

Heavy Lift Off

Heavy Lift On

Heavy Lift Off

Heavy Lift On

TRANSPORTATION GUIDE

6425 21'1"1585

5'2" 1222 4'1"

Work equipment assembly (Backhoe) Weight : PC1250 : 25.3 t 27.9 U.S.ton PC1250SP : 27.7 t 30.5 U.S.ton

Undercarriage (8-roller)

Weight : 30 t [15 t x 2] 33.1 U.S.ton [16.55 U.S.ton x 2] Weight : 30.9 t [15.45 t x 2](with full length roller guard) 34.1 U.S.ton [17.05 U.S.ton x 2]

Boom

PC1250 : 11.2 t : 9475 x 2894 x 1474 12.3 U.S.ton : 31'1" x 9'6" x 4'10" PC1250SP : 11.1 t : 8170 x 3095 x 1474 12.2 U.S.ton : 26'10" x 10'2" x 4'10"

Arm


Bucket


Arm cylinder

1.5 t 1.7 U.S.ton

Boom cylinder

2.4 t [1.2 t x 2] 2.64 U.S.ton [1.32 U.S.ton x 2]

Upper structure

Width : 3490 11'5"Weight : 36.4 t 40.1 U.S.ton

(Typical)

OthersWeight : 18.4 t 20.3 U.S.ton

3470 11'5"

1830 6'

1960 6'5"

100 3.9"1915 6'3"

2850 9'4"

845 2'9" 620 2'400 1'4"

600 2'

3155 10'4"

885 2'11"

Weight : 18.0 t 19.8 U.S.ton

6420 21'1"

3130

10'3"

Length : 3950 13'0"

Length: 3810 12'6"

Transportation volume (length x height x width)

Specs shown include the following equipment: Backhoe: Boom 9100 mm 29'10", Arm 3400 mm 11'2", Bucket 5.0 m3 6.5 yd3, Shoes 700 mm 28" double grouser

PC1250LC-8

18


TRANSPORTATION GUIDE


19

STANDARD EQUIPMENT

OPTIONAL EQUIPMENT

ENGINE AND RELATED ITEMS:● Air cleaner, double element, dry type● Auto decelerator● Electric fuel priming pump● Engine, Komatsu SAA6D170E-5● Fuel pre-filters (10 micron) with water separator● Fuel primary filter (2 micron)● Variable speed cooling fan, hydraulic drive, reversible

ELECTRICAL SYSTEM:● Alternator, 90 amp, 24 V● Batteries, 220 Ah, 2 x 12 V● Interconnected horn and flashing light● Power supply, 12V● Starting motors, 11kW x 2● Step light with timer● Working lights-2 boom, 2 cab top front, 1 cab bottom

UNDERCARRIAGE:● 700 mm 28'' double grouser (PC1250-8)● 1000 mm 39.4'' double grouser (PC1250LC-8)● 8 track/3 carrier rollers (each side)(PC1250-8)● 10 track/3 carrier rollers (each side)(PC1250LC-8)● Hydraulic track adjusters (each side)● Track guiding guard (each side)

GUARDS AND COVERS:● Engine thermal guards and fan guard● Dust-proof net for radiator and oil cooler● Pump/engine room partition wall● Travel motor guards● Revolving frame under cover (Heavy-duty)● Track frame undercover (center)

OPERATOR ENVIRONMENT:● Damper mount, all-weather, pressurized, sound-suppressed cabwith tinted glass windows, lockable door, intermittent window wiperand washer, floormat, cigarette lighter and ashtray

● Instrument panel with electronic display/monitor system, electroni-cally-controlled throttle dial, electric service meter, gauges (coolanttemperature, hydraulic temperature and fuel level), caution lights(electric charge, engine oil pressure, and air cleaner clogging), indi-cator lights (engine preheating and swing lock light) level checklights (coolant, engine oil, and hydraulic oil level), self-diagnosticsystem with trouble data memory

● Automatic air conditioner/heater/defroster system● FOPS● Pull-up type front window, lockable

● Radio, AM-FM● Rearview mirrors, left and right● Seat, fully adjustable with suspension● Seat belt 78 mm 3" non-cinching

HYDRAULIC CONTROLS:● Fully hydraulic, with Electronic Open-Center Load-Sensing (EOLSS)and engine speed sensing (pump and engine mutual control system)

● One gear pump for control circuit● Two axial piston motors for swing with single-stage relief valve● One axial piston motor per track for travel with counter balance valve● Three variable capacity piston pumps (2 Main, 1 Swing)● Three control valves, 5+4+4 spools (boom, arm, bucket, swing, andtravel)

● Control levers, wrist control levers for arm, boom, bucket, and swingwith PPC system

● Control levers and pedals for steering and travel with PPC system● Oil cooler, hydraulic● In-line high pressure hydraulic filters● Shockless boom control● Swing priority mode● Two-mode setting for boom● Working modes: Power, Economy (four level), Heavy Lift

DRIVE AND BRAKE SYSTEM:● Brakes, hydraulic lock travel brakes, oil disc parking● Hydrostatic two travel speed system with planetary double reductionfinal drive

OTHER STANDARD EQUIPMENT:● Automatic swing holding brake● Corrosion resister● Counterweight, 18000 kg 39,680 lb● Grease gun, air pump type● Horn, air● KOMTRAX Plus● Large handrails and steps● Lift capacity chart● Marks and plates, English● One-touch engine oil drainage● Paint, Komatsu standard● PM tune-up service connector● Slip resistant plates● Travel alarm● Wide catwalk

● Arms (Backhoe):—3400 mm 11'2'' arm assembly—3400 mm 11'2'' SP arm assembly (PC1250-8)—4500 mm 14'9'' arm assembly—5700 mm 18'8'' arm assembly

● Booms (Backhoe):—7800 mm 25'7'' SP boom assembly (PC1250-8)—9100 mm 29'10'' boom assembly

● Cab full front guard (PC1250-8)● Shoes:—1000 mm 39.4'' double grouser (PC1250-8)—1200 mm 47.25'' double grouser (PC1250LC-8)

● Track roller guard (full length) (PC1250-8)

AESS698-02 ©2012 Komatsu Printed in USA AD04(5M)C 04/12 (EV-1)

www.KomatsuAmerica.com Komatsu America Corp. is an authorized licensee of Komatsu Ltd.Materials and specifications are subject to change without notice

is a registered trademark of Komatsu Ltd., JapanKOMTRAX Plus is a trademark of Komatsu America Corp.

OPERATING WEIGHT 234,790–254,000 lb BUCKET...

Documents

Transcript of OPERATING WEIGHT 234,790–254,000 lb BUCKET...