-. I ' ' -I , I ....

I i -

I i I

...I

I I -u , I .....

I \ , I ......

u I I -u

. I I ' ... I , u

, I

' .....

Operating Instructions for the ASTROPULSE MODEL D

Bio-Active Frequency Instrument

Copyright © 1995, by AstroPulse Prior written authorization required to reproduce

any part of this literature in any fonn.

Before discarding your shipping carton, be sure to remove the two polished steel cylinders inside the foam columns in the comers (with the foam cubes covering the top.) Thanks for your order!

THE TINY SIZE IS MISLFADING-IT IS ACTUALLY EXTREMELY COMPLEX. We shrunk the model D down to about ONE POUND by using components ordinarily used in spacecraft. By the time you finish this handbook, you'll understand why it took decades to perfect it.

I I

I ' -

I I I t

.:...J

1 i

! I ......

u u I I I I ......

. !

I ;

u

u I 1 _.

~ I

u

: I I ' -.i

! I I ' w

I ; u

u J : l ........

What" ~nd of frequencies a~~- ~~~~? ........ ]

All frequendes on the model D have been dinically tested for at least 5 years to assure absence of any side effects. Many of these bio-active frequencies have actually been in laboratory use for much longer than 5 years.

The model D utilizes two distinctly different types of frequencies: microbe frequencies and tissue frequency patterns.

MICROBE FREQUENCIES are used in experiments for the destruction of pathogens--disease organisms such as viruses, bacteria, fungi, amoebae, etc. Microbe frequencies include all frequencies discovered by the brilliant scientist Royal Rife, as well as those discovered by our own research.

Over the course of three decades, the scientist who developed the model D also discovered many new frequency patterns which appeared to trigger proper function of organs rather than destroy microbes.

These TISSUE FREQUENCY PATTERNS are believed to activate normal cell functions (such as repair and regeneration, production of various metabolites, secretion, etc.) They are used on animals and cell cultures, except where medical use is authorized. Like the microbe frequencies, tissue frequency patterns are free of side effects.

Unlike Rife's microbe frequencies, most tissue frequencies must be accurate to a thousandth of a hertz or better in order to influence metabolism. Therefore, tissue frequency patterns can only be used on the model D. Typical Rife Generators are unable to achieve anywhere near that kind of accuracy, or to program patterns of frequencies known as channels.

Your AstroPulse Model Dis, by far, the most advanced research instrument in existence of its kind, the result of plowing back all available funds into research for many years. The scientist who developed this technology and licensed it to this company requires that we make it affordable to as many

, people as possible. So we have made the model D available for a fraction of what it should cost, quite literally. ·

page 3

How does this instrument work? . J ~

This instrument practically does all the work for you-from automatically selecting the correct frequency pattern (when accessory is available) to modifying programmed frequendes and patterns for particular situations.

Your new model D indudes ALL KNOWN RIO-ACTIVE FREQUENCIES. Some frequency ranges are specifically modified for compatibility with radiant coatings, some are combined in patterns, and other frequencies must run alone.

About all you have to do is enter the desired frequency patterns on a keypad, and the computer automatically delivers them in sequences to the electrodes.

You can find the frequency patterns appropriate for a given situation either by consulting tables or by using the Automatic Channel Selector (when available).

And if you are unsure which frequency channels to use, you can run any of thirty programs that automatically run through ALL known bio-active frequency patterns. By running through all of them, you are certain to get the frequencies you need. (Running only frequency channels you select is faster, naturally.)

Until it obtains FDA approval for use in mainstream medicine, this instrument can be sold within the United States only for personal investigation of bio-active frequencies and the other applications listed on page 7.

The average cost of FDA approval of a product for the medical profession is 234 million dollars, according to the American Pharm. Mftrs. Assoc. Please contact us if you believe in our technology and wish to join us in funding FDA approval.

page4

n I ,

n n n il I I

n n ) I

n I .

-J [ I ,

n '

(i I I ' I

n n n n ! I

n n

: I ~

J I j

i : ~ I -. I .....

' : I

' ' i I I :

I : -' ,

i I w \

i : G

i I ' I

I I I __,

i w

. I I

;,.J

j

. I I I .....

Our Channels are for use on the model D only

We regret that you will be unable to transfer the frequency patterns used on this instrument for use on any other instrument you may own .

First, because the frequencies in some ranges were specifically modified for compatibility with our proprietary technology, and are programmed to run in patterns called channels. These channels are automatically programmed wstom sequences and automatic programs which you select.

And second, because most of our frequencies are tissue frequencies. In contrast to Rife frequencies, extreme accuracy (greater than 1 o-3 Hz) is required to reproduce the effects of the DNA or "tissue" frequencies.

Ordinary Rife generators/ frequency instruments use the 28 microbe frequencies discovered by Rife, but are incapable of maintaining anything near the accuracy required for tissue frequencies.

Radionics devices lack any measurable electromagnetic signal. Rife frequencies and tissue frequency patterns require a measurable electromagnetic signal, a physical wave, in order to produce an effect.

Therefore, neither Rife nor Tissue frequencies have any effect whatsoever if used on radio nics devices (other than the psychotronic influence of the operator himself). By contrast, the effect of these same frequencies used in the model D is typically quite obvious, and quite soon.

WHAT ARE SEQUENCES AND AUTOMATIC PROGRAMS?

Sequences are series of frequency channels that you can select from a table, according to your needs, and store in the memory. The model D will deliver any sequence to the electrodes at any time in the future you select it with the keypad. The Automatic Programs are the same, but those channels are selected for you •

page 5

This man is using someone else's version of our instrument. It is quite limited in the

n n n :1 : I

n ! l

r I I

I! I .

results it can achieve, due to a complete lack of understanding of the technology. r However it will keep him cool on a hot day until the dog gets tired. ! I

' ___ ,,...., ..... .

IMPORTANT WARNING! ..,\.

Opening the case disables this instrument permanently and invalidates its warranty!

Unauthorized tampering with components may damage this delicate instrument, especially since only our own engineers can recognize its surface mount components (commonly used in spacecraft) and read its protected programs.

Therefore the model D is designed to permanently disable itself if the case is opened. Any instrument which has been disabled by opening or destroying the case will be returned immediately to the customer AS RECEMD, WITHOUT EXCEPTION, AND WITHOUT REPAIR.

page6

,-... i I

n '• I

n . I

n : I

n n ' '

n

I I w

: I LJ

i I ' i

; i ' I i -

i I I ' ;....I

' l G I 1 I ' u , I : i ~

J ! ~

' I u I I I , -

I L • I

i I 1..0

' I 1 • w

r lawful Uses ] In the U.S., even the $234 million dollar costs for FDA product testing may not guarantee FDA approval for its use by the medical profession.

There is strong opposition from the billion-dollar-a-day drug and health care industries to anything which might reduce the need for its own products and seJVices. This powerful cartel has often even used its huge resources and political influence to suppress sales of nutrients and herbs.

So until approved for the medical profession, those who are subject to FDA regulations can only employ this instrument for Qne __ o[the_Jollowing _uses:

Investigation of the effects of frequency patterns on cell cultures, bacteria, lab animals, or themselves.

Experiments in relaxation, energy balancing, hypnotic induction or alpha entrainment.

Technical use or scientific research to validate the effects of bio-active frequencies. Calibration of other instruments.

Sales or scientific demonstrations. Use on pets/livestock/show or breeding stock. Experiments with frequencies to determine the effect on life extension,

genomes, with the earth's resonant frequency, etc.

Clearly, the uses of frequency patterns are practically unlimited, since everything that is alive utilizes them.

While the instrument itself is legal to possess, treatment of disease may be restricted in some locations until approved for the medical profession. In that case, you can still use it for any one of the applications above.

Since both this instrument and its handbook are distributed throughout the world, no attempt has been made to restrict reference in the literature to what is currently authorized in the U.S. or any other country. Naturally, nothing in this literature is intended to encourage unauthorized use of any kind .

But even where medical uses are not yet approved, it is LEGAL TO POSSESS and use this instrument privately. It is what you use it for that might not be.

page7

There are also stria regulations against manufaaurers giving any medical advice to customers for the treatment of any disease. This has been enforced with surveillance of telephone calls to and from manufaaurers.

To stay in business and avoid prosecution for practicing medicine, we do not give medical advice of any kind, such as recommending specific frequencies for use on a customer's disease. We make no exceptions.

However, you will find evervthing you need to know for every conceivable case, in the instructional literature included with your unit.

Your manuals conuin far more information than we could explain on the phone or in a letter, even if it were legal to give medical advice on the phone. We believe you will agree once you have read everything we give you.

So please be patient and have faith!

rr : I

~

I I . I ,' I

r i 1

n i i

n J I

r I I • I

:-1 i I I

Your instructional literature contains EVERYTHING we know. If it's not in J1 there, we don't know it.

page 8

M i ' r ! ' I

n ... ,

r I I I •

n ii ! I

n ,..., i I

I !

1 ! -: r -I i -

' . '

-\ I .,_

I !, I

I ' I )

...J

' . ;,..,..

i I

:....~

. i

' I -I I .

'r '

I :

I If results seem to be blocked }

We know from years of experience that if the instrument is properly used and properly functioning, users get what they expect from this technology.

But what if it is not properly functioning, or if it is used improperly?

CAll. US IMMEDIAmY if you don't see any results within 3 to 4 weeks. While we absolutely will not give medical advice, we may be able to identify some problem that is blocking all progress.

For example, it could be that you aren't getting results because you misunderstood some part of the rather complex operating procedures.

Or very rarely, a component fails and affects performance, although the instrument continues to function.

So if you don't get results, DON'T WAIT UNTIL IT'S TOO lATE TO AND OUT WHAT THE PROBLEM IS!

Remember however, that certain situations just take more time. For example, in some experiments, months are required for organs to rebuild or regenerate.

But regardless of how much time you allow, this instrument is NOT designed to correct the following problems: t!NUTRITIONAL deficiencies e.ITOXIC EXPOSURES (including damage from certain drugs) tiSEVERE TRAUMA (surgical or accidental) tiDAMAGE FROM IONIZING OR GEOPATHIC RADIATION

(the radiation must be eliminated before there is a chance of recovery)

Also please remember that we firmly follow the policy of refraining from giving medical advice, including specific frequencies for specific problems. We can only help you with the procedures for the instrument itself.

page 9

Regulations strictly forbid the manufacturer of any product to mention its medical benefits until it is FDA-approved. And that costs $234 million dollars or more. So if you notice, nothing we say or print makes any actual medical claims for

curing anything or anyone.

But we can legally tell you that a great many customers have written us letters of deep gratitude. And out of the last 1500 customers, you could count the ones who requested refunds on the fingers of two hands.

That should tell you something. So just HAVE CONFIDENCE that if you follow directions carefully, you'll see results you can hardly believe!

page 10

n ' '

n n n n n n r , I

,..... I . , I ' !

ij ! I

i1 ; I I '

n I ' '

f-j r I

n ! I

n ;-,

I I .

n n I .

i r

, I I

: I .....-

I . .....

: ; !

~

I I ' ....

. ; -!

~\

!

\ ! I ;.j

-' I

LJ

-

Just How Safe is This Instrument?

In addition to the long-term safety tests described above, our engineers went to extremes to make this instrument much more safe electrically than either Underwriter's Laboratories or the FDA required for their approval .

For example, this instrument is so well isolated from house current, that you would practically have to melt it before it could present an electrical hazard.

And we repeat, all frequencies have been clinically tested for at least 5 years to determine that there is a complete absence of side effects.

In addition to the safety of low voltage from our AC adapter (9 volts), the output to the electrodes has been limited to specific levels which change with each range of frequencies. This avoids excessive stimulation, but is still just right to produce the desired effect in each range of frequencies •

Many other safety advances were made in this model. Unlike the previous version, distance for air circulation around this instrument is now unnecessary, since the miniaturized components (as used in spacecraft) produce so little heat. Just leave enough room in back to keep the cord from kinking.

It is virtually impossible to overheat while in use (though direct sunlight or hot cars can still damage components).

Unlike other appliances, the model D has been designed to utilize many types of AC adapters. So you can also use power supplies from just about any country. All that matters is that the output voltage of the AC adapter is between 8 and 24 volts AC or DC, 1 amp. Plus, this unit is extremely rugged.

And you can use it in the car with a cigarette lighter adapter (provided you use it from the passenger seat only, to avoid distraction while driving). There is much more, but you'd probably like to get started now.

page 11

You can use the model D in practically any country

Unlike other appliances, the model D automatically adjusts to a wide variety of voltages and currents available with different converter/adapters.

So you can use the model Din cars, boats, hotels, and airplanes.

YOU CAN USE ANY ADAPTER OR CONVERTER, AS LONG AS ITS lABEL SHOWS THAT ITS OUTPUT VOLTAGE AND CURRENT FAll- ANYWHERE WITHIN THIS RANGE:

Output: between 8 and 24 volts, either AC or DC, from 50 to 400 Hz BUT AT LEAST 1 amp ( = 1,000 milliamps). The label on the converter or adapter will tell you what it is (nearly all can be used, but it's important to check anyway!!).

(It is illegal to use personal electronic appf.ances on COMMERCIAL ftights where it could interfere with navigation signals. And in cars, elec:tronic devices 6ke this should only be used by passengers, since drivers or pilots could be distracted whHe operating them).

The AC-adapter supplied with the model D works for all Mexican and U.S. outlets. For other countries, the easiest solution is to pick up a foreign power converter at airport newsstands.

By using the converters sold at airports, you can just plug the adapter we give you directly into the foreign power converter, without trying to find an AC adapter that also fits the connection on the back of the instrument (diameter 2.1 x 5.5 mm).

If you buy an AC adapter, buy it at your destination, so its prongs will exactly fit the outlets in that country. Many countries use different prong shapes!

BUT WHATEVER YOU USE, ALWAYS CHECK THAT IT FAllS WITHIN THE RANGE OF VOLTS AND AMPS DESCRIBED ABOVE.

page 12

n ! I

jl I I

n I I

-' I

.\ ~

il I 1

fl J :

n I I

:1 j ' j I

, I

....., I I

n ~ I

r I I ' !

n ,' I

l'i i I

I

n ' I

n I '

n

--

I -

: i

' --

' ---

I : .

a.:.

How to Set Up the Model D for the First Time

1. PLUG THE POWER CORD INTO THE BACK OF THE UNIT:

2. TURN ON THE RED POWER SWITCH AND PRESS "RESET".

page 13

I How to apply the Frequency Patterns

You may apply the frequencies through any of these accessories:

(1) THE MIRROR-FINISHED METAL CYLINDERS (for the hands).

(2) THE FLEXIBLE STAINLESS STEEL STRIPS covered with terrycloth.

(3) THE OPTIONAL BROADCASTING ACCESSORY which plugs in the back of the unit and transmits frequencies, without contacting the subject. It is currently under testing; we will notify you when this is available.

TO OBTAIN THE DESIRED RESULTS •••••

IT IS VERY IMPORTANT TO POSmON THE ACCESSORIES EXACTLY AS DESCRIBED IN YOUR

SUPPLEMENTAL UTERATURE.

1

. The intensity knob controls the sensation at the electrodes. For the i

maximum results, adjust the intensity so it is strong but quite ; comfortable. Stronger than this is both unnecessary and undesirable. :

page 14

n J .

~ ' I

; I

i1 i 1

n

n I . , I

n I \

n 'i ,1 i

n n 11

-j't n r-1 j ;

n r. I !

n fl J .

I '

.I I -

I ! I

I I -I

I . L...

I

~

-

I '.-:.

I . I

·, ' -: ! •. I ......

1 ~ , I

I :

:........

: I ! I -' . ~ ~ I , -, I I ! :.......

I

' . ' .

! J

-

I Using the hand cylinders J "..!.

These are the bright, mirror-finished metal cylinders in the zip-lock baggie. They are made of a special alloy which is free of all metals known to impart a harmful frequency pattern.

They are usually held in the hands of subjects such as primates and (where authorized) humans or in crevices. Never use internally due to its sharp edges.

If used to focus the effect on a specific area of the body (such as in the armpit, on the axillary lymph nodes) secure the cylinders firmly in place with pressure, or with elastic athletic wrap, headbands, sandbags, etc.

If you wish to use your hands to hold the cylinders against a specific area of the body, wear rubber gloves to ensure that the frequency patterns go to the intended area, instead of being diverted to your hands. Naturally gloves would not be used when you want the frequencies to go through the hands!

The zip-lock bags contain special rubberized cords for the electrodes. Choose the cords with plugs on both ends. Then plug one end of each cord into the hole in each cylinder as shown below:

page 15

n . (

I :

,.., To connect the cylinder to the instrument, plug the other end of each cord into j i the control panel, where shown in this photo:

Channel Time Pulse

ONE CYLINDER MUST BE IN EACH OF THE SUBJECT'S HANDS!

If both cylinders are in the same hand, then the frequency patterns are unable to pass through rest of the body.

And always use both electrodes. Using only one cylinder or foil strip prevents the frequency patterns from reaching the body at all.

Before using these cylinders the first time, it's a good idea to wash the preservative off the cylinders thoroughly with soap and water. While washing them, tape over the hole to keep water out and prevent corrosion. Or just leave the cords plugged into the holes.

page 16

r I I

i\ I .· l l

n ij J i

-I I I :

n ) '

1"'"1

I i

r; I , ; !

,.....

! 1

n I i

n ! l

i1 I i

n 1l I I

I I I , -

I ;

-, I

' I I

I '

I -

J

I I . ' -\ j

I ; I _.,

' I l I

-~­

' ; :..J

i i

i i

! I I I

I I

I i

\ --i

! I u

-...J

It's a good idea to leave the plugs in the cylinder holes all the time, anyway. Frequently removing these "banana" style plugs collapses their prongs.

(Then the plugs would fall out of the cylinders whenever the cords are accidentally touched or moved. Of course you can always use a knife to spread the prongs apart again. But they are brittle and may break. That could interrupt your use of the instrument.

On the other hand, ALWAYS remove the power cord when you move your instrument around, to avoid accidentally kinking the wire or placing strain on internal parts).

How to Use the Fabric-Covered Foil Strips

These electrodes are the flexible strips covered with gray, tenycloth "sleeves". They are used to concentrate the effect on limited areas of the body, and can bend around gentle body cmves.

The terrycloth-covered metal strips are ALWAYS used moistened with water. If left dry, the frequency patterns will be unable to penetrate the body.

THE FOIL STRIPS CAN BE APPLIED IN TWO WAYS:

(1) Under the toes (sideways, not lengthwise) for certain conditions, which are described in the supplementary material.

(2) For all other conditions, it is better to strap them directly over and under the target area with elastic athletic wrap, available in the bandage section of drugstores. Or the subject can line prone so his weight holds them firmly in place.

If strapped against the body, the entire surface of the electrode must be in finn contact with the skin. When held FIRM AND FIAT and the intensity is properly adjusted, the sensation is quite comfortable.

page 17

But if there are gaps between the skin and the fabric covered strips, the subject could experience stinging sensations. So be sure the strips are secured firmly so they are completely flat and snug against the skin.

These fabric-covered foil strips are connected with a different set of cords in the second zip-lock bag. You can identify these cords by the large rubber insulating "boots" at one end of each cable.

If you work the rubber boot backward along the cord, you'll see a large copper clamp under the boot. Fasten this clamp to one of the foil strips, and plug the other end of the cord into the instrument panel.

You want one jaw of that clamp to rest directly against the metal foil strip, for good electrical contact. The other jaw of the clamp should rest on the fabric sleeve, as shown here:

This way, one jaw is tucked under the fabric, which insulates the skin from any stinging sensation (if the rubber insulating "boot" slips back too far during use).

The other jaw, clamped OVER the fabric, gets enough traction to prevent the clamp from sliding off the metal strips when the cord is accidentally moved.

page 18

'I I \ ! i

r-· i ! J i

-) .

' ' ! ~

-I , I : I '·

!, :

r--i j J ·~

-i :

-I I

J :

-! l I I

-~ i

I"'"':

I i

!"""'r . ' ' ' ; I,

;1 ' I

·, ~

I I ,

n

• I -\ i I

: ! ' i

i ,_J

I

' i I , .... i !

~

I

! ~

I I

: I -: I -I ,

I I

0-.1

I I, l -\ ! -\ I u

Therefore, always place the side of the fabric sleeve which covers the clamp against the skin.

Now work the rubber insulating .. boots .. back down the cord to the fabric, to cover the clamps. Unless the boots are all the way down, the bare copper clamps may cause a little stinging if they contact bare skin.

TIPS FROM USERS Many folks cut these strips with ordinary scissors, to fit small areas such as the jaw. If you do this, handle the cut pieces carefully--they are razor sharp.

These cut pieces must be always be covered with white (not dyed) paper towels, or better yet, teny cloth. (If left uncovered, bare metal strips could sting any part of the body except the palms. )

We moisten the fabric with very hot water, and then wrap the strips in a plastic bag to keep them hot until they are applied. This avoids the unpleasant sensation of chilling.

If the subJect lies prone on top of the strips, his weight eliminates the need to strap the strips to the body.

But be sure to place a plastic bag under the strips to protect the bedding or linen from moisture.

However, the fabric should only contain enough water to be thoroughly moist. Excess water may ~~pool" on the plastic and short circuit the electrodes. This would divert the frequency patterns from the body and prevent any results.

Never wet the fabric with anything greasy, or with distilled or toxic water.

Some users add beneficial herb extracts to the water. (The current can carry molecules through skin which are ordinarily too large to penetrate, but not always extremely large, complex botanical compounds.)

Remember that the area treated will only be the part of the body that lies on a direct line between the two strips. Anything outside this line is untreated.

So, if the subject lies prone on top of BOTH strips, the only area of the body to be treated will be the skin and surface muscles between the strips.

But if you want to reach an organ deep within the body, place one strip on top of the body directly over that organ, and the other strip beneath the body directly under the organ. This way, it lies on an imaginary line between them.

page 19

Which is better---­Broadcasting or using electrodes?

There are distinct advantages for each, depending on the situation.

For example, when working with animals, it is much easier to broadcast the frequendes than to convince them that the tingling sensation from the electrodes is a good thing for them!

The broadcasting accessory is also an advantage when the subject of your experiment wants to move around and do other things during the treatment session. This is especially important with the long automatic programs.

And, of course, it is much easier to broadcast frequencies than to hold electrodes or strap them on the body.

Furthermore, in countries where health care has become a highly-profitable industry, political influence has restricted use of instruments with electrodes to use by medical doctors. In such countries, one must broadcast the frequencies.

Nevertheless, there are also times when electrodes work better.

For example, in our animal experiments, we have observed a few conditions which respond poorly when treated with either the broadcasting option or Ray Tubes.

In these cases, only frequendes driven by current from electrodes were able to produce the desired results.

Because there are so many different variations in individual conditions, it is impossible to say whether the subject will respond better to electrodes or to broadcast frequencies. The only way to be certain, is to experiment with each. Which is exactly what we have been doing.

page 20

;i ! I

r-

ll -' I

i 1

n j l

-' I

I l

n

n

-: i n n n 1 I ,

n

I

; r -I I I I ;.....1

\ I ' :....,..

i : \

: !

' ~

I ' I I ' -

: '

I

~

' : I

J -' i ' I

I

--• I ' '

I -"· I ' I

I

I ;..J

Prior to development of our broadcasting accessory, the only successful broadcasting devics were .. Ray Tube .. designs. These were large, fragile glass tubes which frequently broke, at an average pricetag of $3,500.

However we are currently in the final stages of developing and testing a far less expensive optional broadcasting device, which can be dropped without certain destruction and is virtually free of interference in civilian and military bands.

We will release this broadcasting device only when extensive animal testing assures us that it is just as effective as the electrodes in a majority of cases.

Because we must be certain that this design performs as. well as the electrodes in every condition we can test, it is very difficult to give you an exact release date at this time. However we will notify all arstomers when this broadcasting accessoay is avaftable, at the condusion of the tests. Wait till you hear from us.

How to use the Broadcast Accessory

Plugging in the broadcasting accessory automatically disconnects the power to the electrodes. The frequency patterns are then transmitted to the antenna.

For close work with specimens under the microscope, tum the knob down. And tum it all the way up (clockwise) to reach subjects anywhere in the room.

page 21

The broadcast unit plugs into the custom port on the back, as shown below:

The broadcaster plugs into the accessory port on the back. Be gentle: forcing the plug in could damage its pins, if misaligned. So if you encounter resistance, realign the plug and try again. You'll save a long delay waiting for repair, since this is a customized connection.

I Selecting the correct channels J You can either select the correct channels with the Automatic Channel Selector (when available), or by referring to the tables to determine the proper channels used for a specific situation.

The supplemental literature contains tables showing which channels are for use in experiments to eliminate viruses, bacteria, fungi, etc. and which are for use in experiments to promote life extension and normal tissue function.

When we notify you that the Automatic Channel Selector is thoroughly tested and available, it can be used to automatically select the appropriate frequency patterns by electronic analysis of the subject.

page 22

n I I

(j

J I

-! I

rJ J I

~

! I

I'-"\ . I J I

...-, j I

i t

...., I ' ' ~ . I

n I I

I....., I I

('-l I : I . I

-~ I r, I . I I

n ji I .'

r-"! I I

! i

i

:, r -1 r -

' ' '

~ ' ....J

How often should you schedule sessions with the instrument?

: 1 FOR ACUTE CONDmONS which are nonnally expected to I ,

L.. disappear, DAILY SESSIONS ARE PERMISSIBLE. 1 :

I ' ~

' ;

' I I ,

....J

' : : I

i I ' ' ~

I : .....

I . I -

' i ' ' .......

i ,'

~

FOR CHRONIC CONDmONS-those which never disappear on their own- allow an interval of ONE DAY BElWEEN SESSIONS.

BUT IN EITHER CASE, SKIP A SESSION IF YOU FEEL SWGGISH

A fragile, debilitated body is unable to neutralize and eliminate toxins released by massive numbers of dying bacteria and other microbes. Then the symptoms caused by these toxins may temporarily increase.

If that happens, it will be necessary to skip a session and drink lots of water to flush out the bacterial toxins before continuing. Forgetting to drink enough water can actually stop all progress.

Even health subjects must drink a minimum of 8 glasses of purified water each day (or 30 cc. per kg. of body weight). This water must be drunk alone, when there is nothing in the stomach, about 30 minutes before meals.

page 23

Always include channel 28 in every session!

Channel 28 is used to restore balance to intestinal bacteria, since other channels may kill beneficial intestinal bacteria that are genetically similar to pathological (bad) ones.

So ALWAYS INCLUDE 28 in every program.

FOR ANIMALS •••

If you forget to use #28, the subject will sometimes experience unpleasant digestive gas or dia"hea. He may then elect not to report back for the next experiment (or if he does, you'll both be sorry).

Fur is an insulator. Either shave the area beneath the electrodes, or saturate it with water or conductive gel. See next section on how to

adjust intensity without disturbing an animal.

page 24

n n n n

...... \ I

n I i

l ! I

n :l I .

~ I , I I

i1 I i

n I !

r"'l I '

) \

ii i I

n n

: I l ' -' ! \ :

......

I ; I '

i I

--'

' I I '

: i

-I

: I

..J

. I

: i ~

I /

I : -l I

' I I ' -I I \ I

~

I : I ! w

I I I I w

I : I ' ~

[ a.: . ' .

How to Adjust Intensity Properly

NOTE: SKIP TIDS SECTION IF YOU USE A BROADCASTING ACCESSORY. It only applies when using electrodes.

The most effective intensity is a level that is strong • • • but still entirely comfortable to the subject.

Except in cases of extreme pain, Ztatbj.ng_is_gaiMd_by_ using_m_onLin.ten_sity_tb_o.n_is._cam/JJitabk. Excessive intensity may even be counter-productive.

Avoid the use of any electrical device on broken skin. Although some customers report astonishing results when experimenting with a short series of frequencies on the eyes or head, we caution you to keep avoid prolonged or high-intensity electrical stimulation to the eyes or head, even in experiments.

SOME FREQUENCIES REQUIRE INDMDUAL ADJUSTMENT OF THE INTENSI1Y LEVEL !

These frequencies are in the same broad range of frequencies used by nerves, although slightly different. So nerves are attuned to, and extra sensitive to, any frequency within this broad band.

This is why channels 65 to 85 may feel too strong, even at normal levels of intensity. Even if the intensity is unchanged, sensitive individuals perceive those channels as a rapid jolting sensation--harmless, but unpleasant.

So we reduced the power available for channels 65 to 85. But it is still impossible to adjust the intensity for everyone, since some people are just more 'thin-skinned" and sensitive than others. They_. must.._adjustthe. intensity to s.uit_th_e.m.selv..e.s_._

page 25

For example, an intensity that is comfortable for a person with dry skin may feel much too strong for someone with very moist skin.

That's because frequencies easily penetrate moist skin, but have difficulty penetrating dry skin. (So those with dry skin sometimes wet the electrodes, wash their hands, or shower, in order to get a stronger effect.)

Obviously, the only solution is to let.each subject select.the .. intensity_.he prefers for each frequency range. Only YOU know what is comfortable for you.

It is, however, quite unnecessary to adjust intensity between MOST frequencies. /fyou use the same program several times, you'll know ifyou can leave the intensity control set for the entire program, or if it contains '~trong "frequency channels that require adjustment of intensity.

To avoid the discomfort of being caught by surprise when one of these 'jtrong "frequencies starts, YOU SHOULD PROGRAM THE "STRONG" FREQUENCIES IN A SEPARATE SEQUENCE BY THEMSELVES. Then the same low intensity can be used for all channels in that sequence.

In general, channels 65 to 85 are "strong~~ But some other channels may also feel too "strong~~ if they are sequenced right after channels 1 to 14.

That's because most subjects are unable to feel channels 1 to 14 at all. So they tum these channels up to FULL INTENSITY. Imagine their surprise if the NEXT channel programmed was a strong channel like 85 ! So to avoid a sudden unpleasant surge, separate these "strong" channels in a different sequence entirely (instructions for doing that come later).

If you prefer to keep these "strong" channels in the same sequence with other channels, you must tum the intensity DOWN TO ZERO BETWEEN CHANNELS, And gradually adjust it UP TO A COMFORTABLE LEVEL THE NEXT CHANNEL BEGINS.

To give you time to do this, an audio warning signal alerts you when one channel ends, and before the next begins.

page 26

n ' ' ' I

n ! l

n r: , I ) I

1 I I

-I i ' l

n i ' ' :

n I I I I,

n f'i . I I ~

n i I

n J '

I""'!

J l

n n il I I

i' i I

' I I I -

: i

I ' LJ

I :

i I -.J

\ : ! J w

\ I I I w

I

: I l.,.J

1 : u

' I

: ! t i -I ; . I -

! i : '

~

I ! w : I I .

i...J

l t u

Always adjust the intensity gradually, ESPECIALLY for channel 85. Channel85 is a special case in a class by itself--- for up to 2 seconds, you may feel nothing. Then if you have been turning up the intensity trying to feel something, suddenly you may be surprised by an uncomfortable surge! So wait a couple of seconds before adjusting channel 85 ... each and every time you make an adjustment.

By now, you probably understand why we cannot set the intensity to a perfect level for every individual, every skin condition, every frequency and sequence.

So unless you move 'tstrong "frequency channels into a separate sequence, pay attention to the audio warnings between channels. Turn down the intensity when one channel stops. Then tum it up to a comfortable level again, after the next programmed frequency starts.

To help you, your model D beeps to signal you just before the next frequency in a sequence begins. Be alert to turn the intensity down between frequencies, and up again when the next frequency starts.

Of course, with the broadcasting accessory, it is unnecessary to ever adjust intensity. Channels transmitted by the model D are undetectable and have no tingling sensation at all. But read that section for details.

page 27

ADJUSTING INTENSilY FOR ANIMALS

& OTHER SUBJECTS

If. your subject is an animal, use the broadcasting accessory if available. This eliminates the need to adjust intensity for a subject that can't tell you easily how it feels.

If using electrodes, restrain the animal, as he may wander off, struggle, or resist your strapping electrodes on his body. Thoroughly saturate the fur under the electrodes with water or gel, or shave it. Then increase the intensity very gradually, just until the animal shows slightly restless behaviour.

Be alert to animal attempts at communication. If an animal feels an unexpected jolt in intensity, he may signal he resents this by urinating on your shoe. If this happens, back down a hair on the intensity, until your little animal friend is comfortable once again.

Humans are more verbal. If you are careless about the intensity, those with a colorful vocabulary can sometimes demonstrate astonishing intuitive knowledge about your parents• state of matrimony when you were born.

So_ if the .. su_bject is h.uman (where such use is approved), let him adjust the intensity himself.

page 28

n I :

i1 I I

n J i

li I (

n I 1

n n I 1

n n n n I i

n -! I I '

ri I \

n

' ' ~

' ! lo.oO

I ' ' I

w

: i

I ' I ._..

I ' 1 i -' j I I ' ' ;..J

\ I

' '

I ' I I ; .... ' '

' ' ' I ~

: ' ; I :....

i : L.J

! I --. '

: I ~

I u

I I

If you are unable to hear the audio signal, the red dot on the II channel'' portion of the display will alert you when to adjust the intensity.

When you see the dot flashing, gradually increase the intensity to a comfortable level.

A flashing dot indicates that the channel is running. (Some channels are undetectable by a tingling sensation).

When you see a steadily lit red dot (between channels), turn down the intensity until the dot starts flashing again.

This prevents being surprised by a sudden surge if a II strong" channel is next in the sequence.

~ ~

page 29

I What if it won't operate? I If a single command has been omitted or performed out of sequence, the instrument will not perform your command.

In that case, returning it to us will accomplish nothing--­because the instrument will check out perfectly when we test it.

It's easy to miss some trivial little step in the command sequence. So before assuming anything is wrong, please walk through the instructions step­by-step, like this:

1. PRESS RESET.

2. RESUME THE SEQUENCE OF COMMANDS FROM THE BEGINNING, RFADING DIRECTLY FROM THIS BOOK.

page 30

,.., l I I '

n n I I ' '

n ' I

ii ! \

n ....., 1 (

n r1 I !

n n n i"\ I ' I :

n n 'l I '

n r: I :

n

: I

! I ~

' : I ........

; ' i I --' ' \ ' ' '

, I ' '

: I I !

;,...J

I

: I

i , I

~

' ' ' I

! ~ -' ; I ~

' ' : '

I I

So far, the only problems with the model D have been due to customers missing a step in the command sequence.

But after checking this book, if you still have a problem getting the instrument to accept commands, write or call us asking for help at once. Components do sometimes fdil prematurely.

We may be able to solve the problem over the phone, without waiting for your instrument to be returned to you and without the risk of shipping damage in transit.

We really want you to succeed. So call us if you do everything right, but see little change after 3 to 4 weeks (except in cases which normally take longer: extensive degeneration from geopathic radiation, tissue trauma, toxic exposure, etc.)

WHAT YOU WILL SEE IN THE DISPlAY WINDOW

Over ··cHANNEL" you will see which frequency or sequence of frequencies you have selected.

U Over •'TIME" will be the time you select to deliver each frequency to the electrodes, in minutes and tenths of a minute (the decimal appears

· only after the program starts). ~

·, 1

Over ••puLSE" is the number of seconds you want each frequency to _.. remain on, before a rest pause of one second. This can only be

changed once the program begins.

-': '

I ~

! ;

'-'

ABOVE THE WINDOW, a red light appears next to "Open Ckt." when there is any interruption in the circuit, to indicate frequencies are not being delivered. A light also appears after ~~Pulse" when pulse begins.

page 31

KEYPAD COMMANDS to select the desired channels

With the "SEQ" key you can create a separate SEQUENCE of frequency channels for every condition you experiment with.

You can fill these custom sequences with channels selected for a given condition from the tables in your supplemental literature. Or the Automatic Channel Selector can select them for you, when available.

Once you enter all these channels in the memory, you can command the Model D to run all your favorite channels at any time just by pressing 5 keys. You can create these custom sequences for up to 1 0 different subjects or conditions, and enter 30 different frequency channels in each sequence.

Furthermore, you can command the 30 "AUTO" programs to automatically run all the known bio-active frequency channels, or just segments of them. The model D has so many bio-active frequency patterns that if you ran them all for just one minute, it would still take 15 hours to finish them all!

Many channels must be run one at a time, to avoid harmful interference. But some frequencies can safely be combined into patterns, depending on what they are used for.

Because it would take 45 hours to run all the channels in AUTO 1 for 3 minutes, these channels are also divided into 29 much shorter programs, separated according to what they are used for.

These programs are designated as "AUTO 2" up to "AUTO 30 ... So you can see, there is a tremendous variety of combinations, using hundreds of bio-active channels singly or in frequency patterns, in sequences of your own choice, or in programs that automatically run all the channels in a given range and select those best suited to your purpose.

The following section will give you the commands to do all of that quickly and easily. It may seem complex at first. But a little ''hands on" practice makes it seem very familiar, versatile and convenient after a week or two.

page 32

n n I I

n ) :

n I I

,.-,

J !

n I I

n n I ,

n I '

n n n

r"\ I ,

n

I

. l ' I ......

. i ~ !

l ' I .

\ooJ

' I ' I

\ I

' I ;...J

i I I '

:...J

. ' I I

LJ

i • I

' i i -'i :

' ;,j

: '

'

\ ' I I

:...J

; : --

( DESCRIPTION OF KEYPAD FUNCTIONS

The keypad is used to select automatic programs or program strings of up to 30 selected frequencies per program.

Once you set the time by pressing "SELECT'~ a "C" appears on the display. This 1C'' (for channel) tells you to enter the desired frequency channel now.

Each time you press a key, the instrument "beeps" --briefly if the number is correct, longer if you selected an invalid frequency channel or error.

C(J 1RESET' MFANS IIENTER NEXT PROGRAM". Before selecting any new sequence of channels, press ""reset".

**THE "SELECT' KEY MEANS ""OK", ""SELECT," OR '"ENTER" Hitting it once selects a program; hitting it twice memorizes whatever number you selected (such as adding a time or frequency to a sequence). '

M PRESSING "DEL' JWICE DELETES UNWANTED NUMBERS

** THE "SEQ' KEY SELECTS A SEQUENCE OF FREQUENCIES

.,.. THE ""RUN" KEY DEUVERS FREQUENCIES TO THE EI.ECfRODES

~~THE ""AUTO" KEY SELECfS A PROGRAM THAT i RUNS A SERIES OF AUTOMATICALLY-SELECfED CHANNELS i

--------------- __)

REMEMBER: TO DELETE OR ADD CHANNELS FROM A SEQUENCE, YOU MUST HIT THE ""DEL" or ""SELECT" KEY lWICE.

REMINDER If you use electrodes, it is ESSENTIAL to read the section on correct placement of electrodes to get the desired result. See your supplemental infonnation for details.

page 33

I How to Select Running Time

Tum on the power. Now you see an ''L" appear in the display window. "L" is for "LENGTH of time" (since the window can't display 'T''for Time.)

Each frequency channel is already programmed to run automatically for 3 minutes before stopping (longer for some channels). 3 minutes is considered the optimum time (some researchers experiment on pain with 1 0-20 minutes).

If you want to select any time other than 3 minutes per channel, punch in the desired number of minutes on the keypad. Changing the time is only possible when you see the "L" (at the beginning of a program).

Now, each channel you select will be delivered to the electrodes for that number of minutes before stopping. After your channels start running, the green numbers in the "TIME" window will display the time selected, and count down the remaining time (in minutes and tenths of a minute).

page 34

n n n I I I

r, I I J I

,...., I ' . I

n I I

,...., : I ~ I

;-i i j I '

!"""'

J I

r I I

li I I

r; ! I

n ! ~ J I

-i I

n n n n n

; i ' ' .....

I i ~

~ i . ;

I :

: I 1 i

I ;

I i w

I i w

! I w

: i w

' I

I ! • I -I . I -

Press RESET and:

SELECT DESIRED CHANNEL NUMBER (selected from tables in supplement) SELECT RUN.

(Note: Models sold in some areas use "MEM"on the SELECT key, for "memorize''·

Now look for a flashing dot in the "CHANNEL II section of the display. The flashing dot means the selected frequencies are being delivered to the electrodes or broadcast until the selected time expires.

r---

After a channel stops running, you will hear a warning signal followed by several short beeps.

This is your cue to tum the intensity ALL THE WAY DOWN to ensure a comfortoble transition to the next channel.

When the short beeps end and the next channel begins, and you can tum up 'I i the intensity back to the level you prefer. I I -, I

~

' i : I

.......

l '

J ' I

'

-------------·

REMINDER

**to change or delete a channel in a sequence •.• stop the sequence, and hit the"AUTO" key repeatedly until you reach the channel to be altered. To change a channel, enter the new channel (which automatically deletes the old one displayed) and hit 'SELECT II twice. To delete, just hit 11DEL" TJY.LC.E.

page 35

I :,

i i

'-:

To create custom sequences of any channels you select

Press ~~RESET" and:

SELECT SEQ

... -~

I TO I 0 (whichever number you choose for this sequence or subject)

SELECT 1st CHANNEL NUMBER SELECT (HIT TWICE).

Continue entering all channels you want in the sequence, by pressing the channel number + SELECT (twice).

NOTE: When you first press SEQ, the window will display what appears to be a '5" before the frequency shown. This is actually an 1'S "for SEQUENCE, due to the limitations ofL.E.D. displays! The 1'S 11serves as a reminder that you are running a series of custom frequencies, rather than the AUTO programs.

To skip through a sequence to reach a particular number, hit ~AUTO' repeatedly.

This is useful when deleting a single channel in a sequence.

ALWAYS include channel #28 in EVERY sequence of frequencies!

page 36

n I I

n i I

n ' I

n J '

r I , , I

n n n I ,

n I I

n n

n I .

n n n

n I \

'

: i .....J

I J

;....I

I i

' I

~

' I • I

~

i i I i u

' I ' i

:...J

I I w

I I , I , I u

I \ : I l..l

' ' '

' I -...I

I

\ I -' ' I ' . ' ' ' LJ

: I I I

;,_j

i ! u

I i ' I -....J

. • ~-. • -. - '" •. - • --• r • r- - To run your custom sequence: ~.

Press 11RESET" and:

SELECT SEQ + I to I 0 (to select the desired sequence number)

SELECT RUN.

After a channel stops running, you will hear a warning signal 1 followed by short beeps.

This is your cue to tum the intensity ALL THE WAY DOWN to · ensure a smooth transition to the next channel. I

When the short beeps end and the next channel begins, and you can tum up the intensity back to a comfortable level.

----------- ------·

REMINDER

**Always include channel no. 28 in every sequence you enter, and after AUTO programs!! (it's already part of AUTO 1)

page 37

j

J ' - .. l..iij

I To run any automatic sequence

Press .. RESET" and:

SELECT AtrfO I tO 30 (select the desired sequence number)

SELECT RUN.

~----------- --·-·-·----- ----

' After a channel stops running, you will hear a warning signal followed by short beeps.

This is your cue to tum the intensity ALL THE WAY DOWN to ensure a smooth transition to the next channel.

When the short beeps end and the next channel begins, and you can tum up the intensity back to a comfortable level. ~---------

TO SELECT ANEW PROGRAM, ALWAYS PRESS "RESET."

AND nJRN DOWN THE INTENSITY BEFORE YOU SELECT A NEW PROGRAM.

page 38

1

n r

! I

n i I

n r ,

I"""' I I r I ' r

ll"i

~ !

,..., I (

r: l I ...... j I ' r

n ii I , I I

n n j 1

n ' '

i! : I l '

n n r I

i1 i I

n 'l I r r

I I : I ~

. I i ! 'lo...J

I " I ! ' ' ....

I, !

\ I ,._..

I i L.J

: : .....

' I I j .....

' : ; w

I I

i I ..._

i : i.J

' I

' ' \ i -' ' j

I ......

u

: I I -

. !

~

' I

~

There are times when you may wish to interrupt a long Automatic sequence of frequencies, and resume later without losing your position in the sequence. Maybe a stranger is at the door, you can't reach the phone, your house is on fire, or your kid is playing baseball with the neighbor's cat, etc.

IF YOU NEED TO INTERRUPT A LONG SEQUENCE··

PRESS ANY KEY TO STOP (except o or reset)

PRESS RUN TO START.

(l'o resume at the same point, you must leave the instrument turned on during the interruption. It can be left on indefinitely)

If you accidentally tum it off or press "RESET", you would have to do this:

To skip through a sequence to return to a particular number, hit I AUTO~ repeatedly.

When you find the point where you stopped an accidentally turned off the instrument, remember to tum the intensity down (to avoid a possible surprise when you pick up the electrodes again).

TO QUIT FOR THE DAY, JUST TURN IT OFF •

page 39

~·- .... - -:!II

Frequency patterns for • mutant strazns

If results are not clearly apparent with bio-active frequencies, the first thing to look for (with specific, custom-made radiation sensors) is geopathic radiation. In virtually EVERY case in European studies where results were slow to occur, geopathic radiation has been detected (with special sensors).

Where geopathic radiation ocwrs, we often find new strains of common pathogens (such as adenoviruses, rhinoviruses, and influenza A,B, & C). Ordinary bio-active frequencies may have less effect on these mutant strains.

Therefore, we programmed the model D for additional frequencies for common mutant strains. You can automatically add these new frequency patterns to the program in use, with this command:

PRESS ''o•• while any program is already running

All the decimals begin to flash, to alert you that additional frequency patterns have been added to the regular program selected.

To return to the regular program, PRESS 0 AGAIN.

Be aware that this option substantially may triple or quadruple the time required to finish a session, because many new frequency patterns are added.

So if you add mutant strain patterns, you may find it necessary to interrupt a session to attend to other duties, and resume the sequence later. But the additional time for mutant strains is hardly noticed if you are using your instrument while at the computer, using the phone, watching TV, etc.

page 40

n n n I I

n I i

n n r: 1 I : i

n > '

n I I

n I !

n n I :

n I ~~

n i i

n n n n n I ~

' ' -

I ,

' I u

I ;

' ' w

' I I I o...j

' ! I : 1.....1

' i : 1

I I i I -: I

' i -' i ' . i ! o...j

I I : I u

J

I I ~

. I ~

I : I I o...j

I PU~EANDSOIT~OUCHrn

THE PULSE CONTROL Nerve tissue tends to acclimate to the comfortable tingling sensation during long sessions. After awhile, the subject of the experiment stops feeling it entirely.

But pulsing the frequencies (turning them off and on) prevents the nerves from getting accustomed to the frequencies. Some researchers believe that a tingling sensation is necessary to get results.

For that reason, we programmed the tissue frequency patterns to automatically pulse on for three seconds, and off for l second. The microbe frequency patterns (l through 28 and some others) run continuously, because they are more effective without pulsing.

You also have a pulse control, so you can experiment with a variety of on­and-off pulses, or with running frequendes continuously.

The pulse control is a red button located just above the Intensity knob. Each time you press the pulse, the PULSE display shows how many seconds the frequency patterns will be delivered to the electrodes, between pauses of one second each. Changing the pulse changes it for all programmed frequencies.

The PULSE window in the display shows the number of seconds that the channel will run until it is intenupted by a pause lasting one second.

You can select any pulse time between I and 7 seconds turned on, but the pause will always be one second. YOU CAN ONLY CHANGE THE PULSE WHEN THE FREQUENCY PAlTERN IS ACTUALLY RUNNING.

We would greatly appreciate feedback from you who are experimenting with the pulse modification. Let us know what combination you find most effective .

page 41

2. SOFT-TOUCH1M This is our term for a design modification which smooths the transition between a high channel and a low channel. It is still important to turn down the intensity between channels, and readjust to your individual comfort level after the next channel starts running.

Using the ACS (Automatic Channel Selector)

The Automatic Channel Selector ACS sensors electronically analyze an individual subject to determine the frequency patterns appropriate for that individual at that period in time.

Whether the ACS selects a microbe or a tissue frequency pattern, it will perform appropriately. For example, if you are analyzing a tumor cell culture, then the ACS will select some channels for the purpose of destroying the tumor virus, and others to stimulate repair of the infected cells.

This is entirely safe, since microbe frequencies affect only microbes, and tissue frequencies are harmless to animal tissue. Nearly three decades of testing have confirmed that the worst that can happen is that nothing will happen.

It is a good idea to keep records of the new frequency patterns selected each time. This has great potential to measure the effect of any prior treatment. Records of the channels selected for an individual may also give valuable clues about challenges to his health BEFORE problems actually appear.

Records of previous channels may even show the effects of changes in lifestyle (exercise, change in diet, giving up smoking). Therefore your records may have great value as a unique means of continually monitoring the state of an individual's constitution for change before it gets out of hand.

At this printing, the ACS has been cleared for animal testing, and after a suitable testing period on humans will be available for our model C and D.

page 42

r; r ; ' I

ij I , ' I

n I !

n n n : I

l"'""' ,I I I '

n n n ~ l I

n n n

n 1'1 I I ' !

: i ......

. i

.....

: !

I • I

L..

II .......

: I w

: I . I

w

! I

~

' . '

.. I r i.-1

. I , I L.

I : i I :...J

' I : I : '

' i . ! u

: I ......

• I ' I w

But until the ACS has been tested on every medical condition and thousands of individuals, there is no way to know if it will select the correct frequency channel in EVERY case. Therefore, if you do not get results with the channels selected by the ACS, experiment with channels selected from the tables in your literature for that particular condition.

Years may pass before the ACS is FDA-approved for the medical profession. Till then, it may be used for animals, cell cultures and research. We will notify all customers when it is available for human use in addition to animals.

Your model D has already been extensively programmed for the ACS. Using the following commands, your model D can read and interpret signals from the ACS, store frequency patterns selected for different subjects as different programs, and send these programmed patterns to the electrodes.

Procedures for ACS Analysis

FOR THE MOST ACCURATE ANALYSIS •••

1. The researcher should prepare the subject for analysis by creating an environment which is as nearly free of external chemicals and electromagnetic "noise" as possible. These are general guidelines:

[!] Shower with unscented soap and shampoo (Ivory, Bronner's) the previous evening. No body or hair products after that.

lE Test early in the morning, so the subject has had no exposure to televisions, computers or other electronic interference in the last 12 hrs.

~ The room used for testing must be free of moderately strong odors. I!E Remove all jewelry, watches, hearing aids, and any other electronic

equipment which the subject can safely dispense with for an hour.

Distance the ACS sensors as far as practical from any motors, magnets, loudspeakers, fans and other electromagnetic disturbances.

page 43

The subject should lie quietly during analysis and meditate or read, but should avoid touching contaminants such as newsprint.

2. Attach the sensor to the area of the body you wish to focus upon. Use the cotton strap provided (or anything else free of adhesives and synthetic chemicals).

The subject may hold the sensor against his body, provided his hands have been washed with fragrance-free soap like Ivory at least 20 minutes earlier.

3. Plug the ACS into the accessory port on the back as shown below: (Align the pins carefully to avoid bending them)

4. Tum on the power to the model D. Press "RESET", and:

SELECT AUIO I to 30 (explained below) SELECT RUN

The model D has so many frequency patterns that if you ran each channel for just one minute, it would still take 15 hours to finish using them all I

Therefore, the model D divides the total spectrum of frequency patterns into different discrete ranges, according to what they are used for.

These ranges are numbered AUTO 1 to AUTO 30, and are delivered to the electrodes automatically whenever you select one of these ranges.

AUTO 1 about 2 hours to complete, while most others finish in on to ten minutes.

page 44

ii I !

n i i

,.., : \ J I

n ! !

n n ! I

I> I ' i •

M I '

) i

r : I I !

n j"""1 ' 1 I ' ' '

i""l

I i

n n 'l I : ...., I I I

' '

n I !

n

I I I 1

LJ

I : . I L

! i u I ! u : I I I ' I w

i i lJ

I I : I ....

i I u

! l u

I I L.i

i I u

I I

' I l.J

: i I I u

' : i ! w , I

u I ' : I w

u

If you don't have time to complete AUTO 1, you can stop the analysis at any point by pressing any key EXCEPT RESET, and later resume the scan of the subject at the same point simply by pressing "RUN". That is a valuable point to remember for Auto 1.

You must leave the model D turned on to resume at the same point later. But that's okay, since you could leave it on for days without overheating).

Now the ACS will begin to analyze the subject and pick frequency patterns from whatever AUTO range number (from 1 to 30) which you selected. On completion, it sends the channels that it determines are best suited for that individual to the model D for interpretation and storage as a new SEQUENCE.

What is done with the Channels selected?

Channels selected by the ACS are stored as Sequences. The number of the Sequence will be "I 0" plus the number of the AUTO program you used to select frequencies from.

Thus, channels selected from the AUTO 1 range of frequency patterns are stored in SEQ 1 l. Whatever is selected from AUTO 20 is stored in SEQ 30. Anything selected from AUTO 30 is stored in SEQ 40, and so on.

Each time the ACS stores channels in a particular SEQUENCE, any channels it previously stored there are written over. In other words, the second time you analyze a subject with AUTO 25, you lose anything stored in SEQUENCE 3 5.

So either select channels from a different AUTO program for each new subject analyzed, or record the channels selected for that subject on a particular date. (The channels selected by the ACS are only visible on the display when running or skipping through that sequence, not during actual analysis).

For example, SEQ 1 1 could be the channels selected for your dog, SEQ 12 could be for the interesting scum you found growing in a pond, SEQ 1 4 could be for your champion brood sow, etc.

page 45

To Run the Channels Selected by the ACS

Press ••RESEr", and:

SELECT SEQ II to 40 (=the number of the AUTO range+ 10)

SELECT RUN.

TROUBLESHOOTING--­Errors You Can Correct at Home

Before shipment, we carefully check each instrument for proper functioning, and calibrate it to ensure perfect performance.

So before assuming that your unit wasn't checked before shipping, please use the checklist below to correct whatever seems to be wrong. You may be able to save yourself the frustration, time and expense of returning what may be a perfectly-functioning unit!

Of course, sometimes something really is out of kilter. Perhaps a component goes bad prematurely, after being checked on the assembly line (a fact of life in any given batch of electronic components, even the best).

Furthermore, instruments are occasionally damaged in transit, without any visible external damage to the shipping carton. That's why we insure them.

page 46

n n n r.

I I

n n n I !

n I i

n n n I !

n r. I i

n n n I !

n n

' i ~

I ! I I I ' .....

I I ' I

' w

i I w

, I w

i I w

I ' I r w I I

I I u

' I . ' I ' ;_j

' ! o..J

; I u . I . I

' .J

i I I I .....

' i I w

But use this checklist before you assume something is wrong with the unit. Shipping it back to be serviced means waiting for weeks before you can use it again. Round trip shipping time coast-to-coast is 2 weeks, plus 1 week for courier delivery to the factory and 1 week for testing and servicing.

1. IF THE INSTRUMENT DOESN'T RESPOND TO YOUR COMMANDS:

Often, painstaking analysis of a returned instrument fails to discover any problem. But upon questioning the customer carefully, we find that he may have missed a step in the sequence of key commands.

That's understandable. Like a computer, this instrument responds only to your commands. For those who use computers, it's very easy.

But for those who don't use computers, it's all new. And with anything new, it's easy to omit a key in the sequence of commands.

Nevertheless, this highly sophisticated instrument operates correctly only when the operator enters the command in the EXACT sequence. If you leave out even one keystroke, it will not perform as desired.

So please walk yourself through the instructions key by key, even more carefully, before going to the time and expense of returning a unit which may function perfectly with the correct commands.

2. IF CHANNELS DISAPPEAR FROM A SEQUENCE-

This can happen if you enter a new channel where a channel already exists. The new channel 11Writes over" (delete) the channel that was displayed on the screen. So go to the end of the sequence (where 'COOO" is displayed on the screen).

page 47

3. OPEN CIRCUIT

If you see a red light next to the words 'OPEN CKT. "in the display window, this means that frequency channels are not being delivered to the electrodes because of an interruption in the circuit.

A few frequencies are so slow that "Open Ckt. ,,flickers on and off rapidly while they run. This is normal. But if the light REMAINS on, all the time, then the circuit is interrupted somewhere, preventing the delivery of frequencies.

WHAT CAUSES AN OPEN CIRCUIT?

(a) If you pull accessories out of the jacks by the cords instead of the plugs, the wire can pull loose, inside the plug. Although the cord is still physically attached to the plug, there is an interruption in the circuit inside. So always pull the accessories out by the plugs, never the cords!

(b). You'll also see an open circuit light if only one electrode is in contact with the body. Two electrodes must always be in contact with the subject's body for delivery of the frequencies.

For example, this interruption in the circuit could occur if an alligator clamp slides off the foil electrode. It's sometimes difficult for the subject to see if an alligator clamp has slipped off the foil strip, especially if an Ace elastic bandage is holding it in place.

The clamp has to be removeable, so we do not rivet it in place. But some customers get a better grip by cutting a notch in the narrow end of the foil electrodes for the entire alligator clamp to fit into snugly. This stops side­to-side motion.

page 48

~ I i I .

n I I

n i I

r-:

I !

r, : I ', I ' '

l I .

n ' '

~ J I : !

n n n n n n n "'"" j I ! I

n i I

n n

: )

J

: i ' I w

J

.J

, I w

, I

' -..l

' I : I

..J

I • I I I

:....J

I

~

I I 'I [

u

I , I

..J

I I . I

1 I -

: i : i -

I I I i I .... I ;

I :

HOT TIPS

If the subject feels worse after the first two sessions instead of better, this strongly suggests he has been drinking less water than he needs to flush out toxins from dead microbes.

Naturally, drinking more water will flush these toxins out and the symptoms will disappear (unless the symptoms are created by some other

.._ __ .;....;...._&.Z.... _____ -J factor (such as side effects from

medication, or kidney dysfunction) .

It is extremely rare for a subject to feel worse, if he drinks enough water to flush out the toxins before they accumulate. Most researchers find 2 cups of purified water (not juice) is adequate, half an hour before meals. (The effect may be reduced unless the stomach is empty).

Remember: this sudden surge in toxins can only occur if vast numbers of disease organisms are dying, much faster than normally.

So a brief increase in symptoms can be a very good sign, when it means the frequendes you selected are destroying disease microbes that RELEASE their stored toxins as they disintegrate.

But it's best to keep plenty of purified drinking water available at all times, to prevent the toxins from causing any discomfort in the first place!

page 49

WHAT IF I CANT FEEL THE TINGLING SENSATION?

A comfortable tingling sensation is NECESSARY for optimum results. The only exception is that channels 1 to 1 4 are nearly impossible to feel, even at high power. For other channels, an easily perceptible but comfortable tingling works best ... more is not better.

Some individuals with dry skin find it difficult to get a tingling sensation from any channel, especially on the soles of their feet, and sometimes on calloused hands.

So some users wet their hands slightly, to increase the conductivity of the frequencies through the hand cylinders. Water is used; hand cream usually does NOT work as it is normally non-conductive.

Others put their feet in two (not one) separate buckets of water, with one of the foil electrodes in each bucket. A few very obese subjects even add Epsom or sea salt to the water. All of this greatly increases the conductivity, so the intensity of tingling may also be increased.

But using water could intensify the strong but harmless jolt if the user forgot to the lower intensity when changing from one channel to a stronger one. So although those with dry skin may benefit by using moisture to obtain the tingling sensation, we cannot recommend it.

Although this instrument is designed to be so safe that it almost has to melt into a puddle before it could be a shock hazard, we are unable to recommend using water with the model D for legal reasons.

~ ~

Once again, although customers have reported extraordinary results with short series of frequencies used on the eyes or head, do not use long strings of frequencies or high-intensity when you experiment on such sensitive areas.

Many years of testing have determined that these frequencies themselves are completely harmless. But we still suggest that you avoid subjecting sensitive areas to very high intensities of electric current, or for long periods of time. You can overdo a good thing. Like everything else that you do to your body, use common sense, and listen to what your body is saying.

page 50

n n n I i

n n . I

n I .

[l l I

n I i

n n . I

n n n n n n n i I i .

n n

I I LJ

i I ' I '-"

' I i ~

. I ' ! w

. I

,.j

I ~

I ; j ~

! ;

: ;

, I

'

I

; ;...J

' i '

' ! ' I .....

; I I :

u

I

' ' w

I I

u

; I

' i

r ~-'

If you make a mistake ..... .

You will hear a beep, longer and louder than the beeps emitted when pressing a key. It is the instrument talking to you, to alert you to an error, such as a non-existent frequency channel or an invalid sequence of commands.

For example, if you press SEQ 99 RUN, you'll hear the longer "error" beep, because_ .there. is_na_s_uc_b_s.e.fl_uenc_e_as._n_umber_9..9.

Friendly advice: If you blame your instrument for your own mistakes, this will only increase your frustration. This may lead to random, unprovoked attacks on cheaper nearby appliances, and possible penalties for blowing off steam from the Federal Bureau of Interference.

So before your frustration reaches dangerous levels, go over each step in the handbook to be sure you performed each command correctly!

How to Keep Your Instrument Health~ Tool

This instrument is EXTREMELY rugged. In our tests, we exposed the model D to steam, dust, heat, cold and rough shocks or bumps. It survived and still worked perfectly.

BUT that was a test. Not real life. In real life, much may depend on the long-term accuracy of this instrument and its internal computer. So protect your investment.

page 51

The model D can operate in temperatures from just above freezing up to 145 o

Fahrenheit. Although it stops functioning at freezing temperatures, it will resume operation again when restored to normal temperature.

Heat above 1 45°F., however, can damage the components inside and affect performance. It's easy to exceed 145°F. it in a car on a hot day, because the angled windshield is very efficient at converting sunlight into heat and trapping it inside the car.

Since the model D can run on adapters for auto cigarette lighters, it's a good bet that someone will forget and leave it in the car someday, and then wonder what's wrong with it the next day.

Cars can also be tough on sophisticated electronic gear for other reasons. If you leave it in the car in very cold weather, moisture will condense inside the case when you bring it indoors. Then the unit will rust inside.

But if you keep the car warm whenever your model D is in the car, then you can bring the instrument into the house with you. Otherwise, let it dry out inside before use.

If you accidentally drop your instrument in water, unplug it and return it to us without turning it on even once. If water seeps in through jacks or crevices, turning it on could short out the motherboard and ruin it instantly.

page 52

n I '

n ~

I i

n ii I I I I

n ! I

:1 r :

I i

rl I

' I : '

r I I

I !

r I ;

,...., ; ' ! !

r , I

I .•

r I I

rr I ,

n l I I

I I : I

u

: I .J

: I . ' -! i I , w

' ' I : I I -I !

: I

w : I i I

' I I I

w

I • I

'

: I

.J

J

I I I -

...J

' ' -

(FREE PRIZES FOR YOUR PROGRESS REPORT )

The enclosed green Progress Repon helps us get feedback from customers and discover even more uses for bio-active frequencies. Please fill it out.

If you send us the most interesting and dramatic Progress Report, you wiU receive $250 or a free Broadcasting Option. But ANYONE who contributes a report with valuable information will receive a certificate redeemable as discounts from $10 up to $100 for any optional accessory (such as the Field Hazard Detector, or when available, the Automatic Channel Selector or Broadcasting Option).

These reports, although anecdotal, form the basis for studies on new uses of bio-active frequencies. Please be accurate, so our staff may rely on them. The reports must be clearly legible and signed so they may be authenticated (though we are NOT permitted to publish them).

These reports become the property of AstroPulse, to be stored outside U.S. jurisdiction. The identity of every customer, as always, is STRICTLY confidential unless the customer gives signed authorizotion to reveal his identity.

page 53

REFERRAL FEES

We are happy to show our appreciation for any customer you send us, by sending you a referral fee of $75 for the first customer, and $300 for any additional customers you refer. This fee is paid 38 days after delivery, to allow time for the new customer to request a refund (which is extremely rare).

(The inventor of this technology requires us to keep it affordable for as many people as possible. This is why the model D is priced far below the $8,500 that might typically be expected to recover the staggering cost of years of research, development, and testing of new frequendes, design and programming.

Nevertheless, the cost of developing advanced technology, decades ahead of its time, must be recovered. The only practical way to do so, and still keep the price affordable, is to offer referral fees to encourage those who send us customers.)

Some customers have earned referral fees of thousands of dollars in one hour, with a fascinating educational demonstration on volunteers from the audience early in a seminar, and asking them to describe the results of this experiment a few hours later.

Those who attend the seminar are given a list to sign if they want further information (they always do). You mail the list to us.

We send those on the list our brochures, and send you a referral fee for each one who becomes a customer.

Since you are not selling anything, it is legal to discuss any benefits you observed experimentally. (If you instead discuss the benefits, and actually sell a product before it receives FDA approval, the FDA can impose very harsh penalties for that.)

Some people offer an inducement to the promoter of the seminar for using part of his seminar, which may have been costly for him to advertise. But some may even pay you for an interesting and educational demonstration of the instrument, since you aren't actually selling anything.

When you refer anyone to us: (a) A computer file is created under your name, so we can confirm that you get a referral fee for anyone on that list who later becomes a customer.

(b) Anyone you refer receives our brochures and educational literature.

Please spend your time and energy only on people who are genuinely interested.Many people have a discouraging negative bias against what they believe is ''too good to be true". Or those who fear that this technology could replace their own services might be hostile--or even cause trouble for you.

So FIRST ASK if they are open to alternatives to conventional methods, and JUDGE THEM, BY THEIR RESPONSE.

page 54

n n n I ' I !

n ~ i : ' i

l II ' ' . ' ' i

"' : I

r: I i

: ;

' ' ' '

-I i

I : i

n : ' i :

r-' i I

n n

I I I

~

L

I :......

I 1 u i i I I ~

I

l ~ -

I I I ' I i ~

i I w I I

~ I : ' ' I ' u

J i t I ,

~

i ! ~

~ I

: I -

J

If you have either a Progress Report or a list of potential customers who want our brochures, send it to this address:

Ste. 1 03-432 7420 Clairemont Mesa Blvd.

San Diego, Cal. 92 1 1 1

This is a mailbox, not an office, of a separate company which judges Progress Reports, sends out prizes, and checks your referrals against our customer list.

WHAT HAPPENS WHEN YOU SEND US A UST OF THOSE YOU REFER?

A computer program automatically cross references our new customers periodically against these lists. It is in our best interest to send these refe"al fees, to encourage you to send more customers in the future.

But computers (and people) sometimes make mistakes. So please ask anyone you refer to mention your name, or let us know when he orders, as double insurance that you receive what is due.

You can get 1 to 7 color brochures free to hand out to friends. It costs about $15 for priority mllil postage, handling

and color printing for 7 three-ounce brochures w. cover letters and 7 three­ounce educational packets. So please request brochures only for those who are seriously interested.

For larger quantities, please help defray our costs by enclosing $5 for priority mllil of each 7 brochures, plus 40 cents per brochure for printing.

Customers outside the U.S. can obtain brochures from our local distributor, or airmailed from us. And in countries where there is no distributor yet, ask about becoming one ! !

page 55