Operating Instructions - Copy Reference: Jupiter-C1, J-C1 ...
Transcript of Operating Instructions - Copy Reference: Jupiter-C1, J-C1 ...
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=156 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 7.800000 mm
2228C/2232C
/2238CO
perating InstructionsC
opy Reference
2228C/2232C
/2238CO
pe
rating
Instructio
nsC
op
y Refe
renc
e
RICOH COMPANY, LTD.15-5, Minami Aoyama 1-chome,Minato-ku, Tokyo 107-8544, JapanPhone: +81-3-3479-3111
2228C/2232C/2238C
Operating Instructions
Copy Reference
Read this manual carefully before you use this product and keep it handy for future reference.For safe and correct use of this machine, please be sure to read the Safety Information in the "General Settings Guide" before you use it.
Placing Originals
Copying
Colour Adjustment/ Program
Troubleshooting
User Tools (Copier/Document Server Features)
Specifications
Overseas AffiliatesU.S.A.RICOH CORPORATION5 Dedrick PlaceWest Caldwell, New Jersey 07006Phone: +1-973-882-2000
The NetherlandsRICOH EUROPE B.V.Groenelaan 3, 1186 AA, AmstelveenPhone: +31-(0)20-5474111
United KingdomRICOH UK LTD.Ricoh House,1 Plane Tree Crescent, Feltham,Middlesex, TW13 7HGPhone: +44-(0)20-8261-4000
GermanyRICOH DEUTSCHLAND GmbHWilhelm-Fay-Strasse 51,D-65936 Frankfurt am MainPhone: +49-(0)69-7104250
FranceRICOH FRANCE S.A.383, Avenue du Général de GaulleBP 307-92143 Clamart CedexPhone: +33-(0)-821-01-74-26
SpainRICOH ESPAÑA S.A.Avda. Litoral Mar, 12-14,Blue Building, Marina Village,08005 BarcelonaPhone: +34-(0)93-295-7600
ItalyRICOH ITALIA SpAVia della Metallurgia 12,37139 VeronaPhone: +39-045-8181500
ChinaRICOH CHINA CO.,LTD.29/F., Lippo Plaza, No.222Huai Hai Zhong Road,Lu Wan District,Shanghai P.C.:200021Phone: +86-21-5396-6888
SingaporeRICOH ASIA PACIFIC PTE.LTD.260 Orchard Road,#15-01/02 The Heeren,Singapore 238855Phone: +65-6830-5888
Printed in The Netherlands
GB GB B149-7501B
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=156 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 7.800000 mm
Declaration of Conformity
“The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending di-rectives and the Low Voltage Directive 73/23/EEC and its amending directives.”
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
aaaa means POWER ON.
bbbb means POWER OFF.
cccc means STAND BY.
Trademark
Acrobat® is a registered trademark of Adobe Systems Incorporated.
Introduction
This manual describes detailed instructions on the operation and notes about the use of this machine.To get maximum versatility from this machine all operators are requested to read this manual carefullyand follow the instructions. Please keep this manual in a handy place near the machine.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be li-able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-ating the machine.
Notes
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manualmight result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your ma-chine before reading this manual. (For details, see P.3 “Machine Types”.)
• Type 1: Aficio 2228C
• Type 2: Aficio 2232C
• Type 3: Aficio 2238C
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts otherthan genuine Ricoh parts with your Ricoh office products.
Power Source
220–240V, 50/60Hz, 8A or more
Please be sure to connect the power cord to a power source as shown above. For details about powersource, see “Power Connection” in the General Settings Guide.
Copyright © 2003, 2004 Ricoh Co., Ltd.
i
Manuals for This Machine
The following manuals describe the operational procedures of this machine. Forparticular functions, see the relevant parts of the manual.
Note❒ Manuals provided are specific to machine type.❒ Adobe Acrobat Reader is necessary to view the manuals as a PDF file.❒ Two CD-ROMs are provided:
• CD-ROM 1 “Operating Instructions for Printer/Scanner”• CD-ROM 2 “Scanner Driver & Document Management Utilities”
❖❖❖❖ General Settings GuideProvides an overview of the machine and describes System Settings (papertrays, Key Operator Tools, etc.), Document Server functions, and trouble-shooting.Refer to this manual for Address Book procedures such as registering faxnumbers, e-mail addresses, and user codes.
❖❖❖❖ Network Guide (PDF file - CD-ROM1)Describes procedures for configuring the machine and computers in a net-work environment.
❖❖❖❖ Copy Reference (this manual)Describes operations, functions, and troubleshooting for the machine's copierfunction.
❖❖❖❖ Facsimile Reference <Basic Features>Describes operations, functions, and troubleshooting for the machine's fac-simile function.
❖❖❖❖ Facsimile Reference <Advanced Features>Describes advanced functions and settings for key operators.
❖❖❖❖ Printer Reference 1Describes system settings and operations for the machine's printer function.
❖❖❖❖ Printer Reference 2 (PDF file - CD-ROM1)Describes operations, functions, and troubleshooting for the machine's print-er function.
❖❖❖❖ Scanner Reference (PDF file - CD-ROM1)Describes operations, functions, and troubleshooting for the machine's scan-ner function.
0816JupiterC1_GB_Copy_FM.book Page i Monday, July 26, 2004 3:12 PM
ii
❖❖❖❖ Manuals for DeskTopBinder V2 LiteDeskTopBinder V2 Lite is a utility included on the CD-ROM labeled “ScannerDriver & Document Management Utilities”.• DeskTopBinder V2 Lite Setup Guide (PDF file - CD-ROM2)
Describes installation of, and the operating environment for DeskTop-Binder V2 Lite in detail. This guide can be displayed from the [Setup] dis-play when DeskTopBinder V2 Lite is installed.
• DeskTopBinder V2 Lite Introduction Guide (PDF file - CD-ROM2)Describes operations of DeskTopBinder V2 Lite and provides an overviewof its functions. This guide is added to the [Start] menu when DeskTop-Binder V2 Lite is installed.
• Auto Document Link Guide (PDF file - CD-ROM2)Describes operations and functions of Auto Document Link installed withDeskTopBinder V2 Lite. This guide is added to the [Start] menu whenDeskTopBinder V2 Lite is installed.
❖❖❖❖ Manuals for ScanRouter V2 LiteScanRouter V2 Lite is a utility included on the CD-ROM labeled “ScannerDriver & Document Management Utilities”.• ScanRouter V2 Lite Setup Guide (PDF file - CD-ROM2)
Describes installation of, settings, and the operating environment for Scan-Router V2 Lite in detail. This guide can be displayed from the [Setup] dis-play when ScanRouter V2 Lite is installed.
• ScanRouter V2 Lite Management Guide (PDF file - CD-ROM2)Describes delivery server management and operations, and provides anoverview of ScanRouter V2 Lite functions. This guide is added to the [Start]menu when ScanRouter V2 Lite is installed.
❖❖❖❖ Other manuals• PS3 Supplement (PDF file - CD-ROM1)• Unix Supplement (Available from an authorized dealer, or as a PDF file on
our Web site.)
0816JupiterC1_GB_Copy_FM.book Page ii Monday, July 26, 2004 3:12 PM
iii
What You Can Do with This Machine <Colour Functions/Colour Adjustments>
You can switch the colour copy mode depending on the type of originals used and the desired finish.
Copies using four colours: yellow, magenta, cyan and black.
Copies in black and white, even when the original is in colour.
Copies in the designated colour.
Colour: Copies using 2 registered colours. Black/Red: Copies the red part of the original in red, and copies all other areas in black and white.
2-Colour Copy (see p.29)
Single Colour Copy (see p.29)
Full Colour Copy (see p.29) Black/White Copy (see p.29)
Colour Copying (see p.29)
Yellow Beige Orange Red Light green Cyan
Pink Magenta Green Marine blue Blue Purple Registered colour
GCMO022e
0816JupiterC1_GB_Copy_FM.book Page iii Monday, July 26, 2004 3:12 PM
iv
Colour Copying (see p.29)
Copies with the date, page numbers, etc. The stamp colour can be yellow, red, cyan, magenta, green, blue, and black.
Printed inserts types:• Preset Stamp (p.70)• User Stamp (p.72)• Date Stamp (p.75)• Page Numbering (p.77)
Stamping on Copies (see p.70)
Copies by changing a specific colour in the original to another colour.
Convert Colours (see p.31)
Copies by deleting a specific colour in the original.
Erase Specified Colour (see p.32 )
Copies by adding a colour to the whole page.
Colour Background (see p.32)
GCMO026e
0816JupiterC1_GB_Copy_FM.book Page iv Monday, July 26, 2004 3:12 PM
v
Primary Colours
Adjusting Colours (see p.87)
Colours can be created by combining the 3 primary colours:yellow, magenta and cyan. Black can be made by combining yellow, magenta and cyan, however, as there might be some slight differences, "black" will be expressed using a black toner.
Adjusts the specific colours (yellow, red, magenta, blue, cyan and green) by mixing them with adjacent colours in the colour circle.
Adjusts the overall colour tone of copies.
Adjust Colour (see p.87) Colour Balance (see p.88)
Adjusting Images (see p.90)
Adjusts the outline of the image. Adjusts the background density of the image.
Sharp/Soft (see p.90) Background Density (see p.91)
Adjusts the shades of the image. Adjust U.C.R (see p.91)Text/Photo Sensitivity (see p.91)A.C.S. Sensitivity (see p.125)Colour Sensitivity (see p.125)
Contrast (see p.90) Other Adjustments (see p.91)
Soft Sharp
Low High
Light Dark
Make yellow more green
Make yellow more red
Darker Lighter
Yellow Cyan
Magenta Black
Yellow
Red
Black
Magenta
Blue
Green
Cyan
Yellow
Red
Magenta
Blue
Green
Cyan
GCMO023e
0816JupiterC1_GB_Copy_FM.book Page v Monday, July 26, 2004 3:12 PM
vi
What You Can Do with This Machine
Functions differ depending on machine type and options. See p.4 “Functions Re-quiring Optional Configurations”.
2-sided 2 Pages 2-sided 1 Page (see p.59" 2 Sided 4 Pages Combine 2 Side")
Front
Front
Back
Back
Front
Back
Front Back
Types of Duplex Copies
1-sided 4 Pages 2-sided 1 Page (see p.58" 1 Sided 4 Pages Combine 2 Side")
2-sided 4 Pages 2-sided 1 Page (see p.59" 2 Sided 8 Pages Combine 2 Side")
1-sided 8 Pages 2-sided 1 Page (see p.58" 1 Sided 8 Pages Combine 2 Side")
1-sided 16 Pages 2-sided 1 Page (see p.59" 1 Sided 16 Pages Combine 2 Side")
1-sided 2 Pages 2-sided 1 Page (see p.55" 1 Sided 2 Sided")
2-sided 1 Page 2-sided 1 Page (see p.55 " 2 Sided 2 Sided")
2-sided 8 Pages 2-sided 1 Page (see p.59" 2 Sided 16 Pages Combine 2 Side")
Front/Back Bound Originals 2-sided Pages (see p.60" Front & Back 2 Sided")
Bound Originals 2-sided Pages (see p.60" Book 2 Sided")
0816JupiterC1_GB_Copy_FM.book Page vi Monday, July 26, 2004 3:12 PM
vii
Copying Book Originals
Open to Left
Open to Right
1-sided Magazine (see p.61 " 1 Sided Magazine")
21
87
8
72
1 6
54
3
21
87 1
27
8 3
45
6
1 35
3 15
Open to Left
Open to Right
2-sided Magazine (see p.62 " 2 Sided Magazine")
1 35
3 15
0816JupiterC1_GB_Copy_FM.book Page vii Monday, July 26, 2004 3:12 PM
viii
Combining Multiple Pages onto a Single Page (see p.57 " One-Sided Combine")
1-sided 2 Pages 1-sided 1 Page 2-sided 1 Page 1-sided 1 Page
1-sided 4 Pages 1-sided 1 Page 2-sided 2 Pages 1-sided 1 Page
1-sided 8 Pages 1-sided 1 Page
Bound Originals 1-sided Pages
Bound Originals 2-sided Pages
Front/Back Bound Originals 2-sided Pages
2-sided 4 Pages 1-sided 1 Page
Copying Originals Such as Books (see p.60 "Series Copies")
2-sided 1 Page 1-sided 2 Pages
Copying 2-Sided Pages onto 1-Sided Pages(see p.55 "2 Sided 1 Sided")
Copying onto Envelopes (see p.26)
0816JupiterC1_GB_Copy_FM.book Page viii Monday, July 26, 2004 3:12 PM
ix
TABLE OF CONTENTSManuals for This Machine ...................................................................................... iWhat You Can Do with This Machine <Colour Functions/Colour Adjustments>
iiiWhat You Can Do with This Machine..................................................................viNotice ......................................................................................................................1How to Read This Manual .....................................................................................2Machine Types .......................................................................................................3Functions Requiring Optional Configurations....................................................4Control Panel..........................................................................................................5
Display Panel .............................................................................................................7
1. Placing Originals
Originals .................................................................................................................9Sizes and Weights of Recommended Originals.........................................................9Sizes Detectable by Auto Paper Select ...................................................................11Missing Image Area .................................................................................................12
Placing Originals..................................................................................................13Original Orientation ..................................................................................................13Placing Originals on the Exposure Glass.................................................................14Placing Originals in the Auto Document Feeder ......................................................15
2. Copying
Basic Procedure...................................................................................................19Interrupt Copy ..........................................................................................................20Left Original Beeper .................................................................................................21Job Preset ................................................................................................................21
Copying from the Bypass Tray...........................................................................22When copying onto OHP Transparencies or Thick Paper .......................................24When Copying on the Back Side of the Paper.........................................................25When copying onto envelopes .................................................................................26
Making A3, 11" ×××× 17" Full Bleed Copies ............................................................28Colour Functions .................................................................................................29
Selecting a Colour Mode..........................................................................................29Convert Colours .......................................................................................................31Erase Colour ............................................................................................................32Colour Background ..................................................................................................32
0816JupiterC1_GB_Copy_FM.book Page ix Monday, July 26, 2004 3:12 PM
x
Copier Functions .................................................................................................33Adjusting Copy Image Density .................................................................................33Selecting the Original Type ......................................................................................34Selecting Copy Paper ..............................................................................................35Preset Reduce/Enlarge ............................................................................................38Zoom ........................................................................................................................39Auto Reduce/Enlarge ...............................................................................................40Size Magnification ....................................................................................................41Directional Magnification (%) ...................................................................................41Directional Size Magnification (mm).........................................................................42Sort...........................................................................................................................43Stack ........................................................................................................................46Staple .......................................................................................................................47Punch .......................................................................................................................51Duplex ......................................................................................................................551 Sided Combine......................................................................................................572 Sided Combine......................................................................................................58Series Copies...........................................................................................................60Copying Book Originals............................................................................................61Image Repeat...........................................................................................................63Double Copies..........................................................................................................64Centring....................................................................................................................65Positive/Negative .....................................................................................................66Mirror........................................................................................................................66Erase........................................................................................................................67Margin Adjustment ...................................................................................................69Preset Stamp ...........................................................................................................70User Stamp ..............................................................................................................72Date Stamp ..............................................................................................................75Page Numbering ......................................................................................................77Covers......................................................................................................................81Slip Sheets ...............................................................................................................82
Storing Data in the Document Server ................................................................83Programs ..............................................................................................................85
Storing a Program ....................................................................................................85Changing a stored program .....................................................................................86Deleting a Program ..................................................................................................86Recalling a Program.................................................................................................86
3. Colour Adjustment/ Program
Colour Adjustment...............................................................................................87Colour Balance.....................................................................................................88
Colour Balance Program..........................................................................................88Image Adjustment................................................................................................90User Colour ..........................................................................................................92
Adjusting Colours Based on the Selected Colour ....................................................92Mixing Colours Manually with the Number Keys......................................................94Deleting User Colours ..............................................................................................94Sampling the User Colours ......................................................................................94
0816JupiterC1_GB_Copy_FM.book Page x Monday, July 26, 2004 3:12 PM
xi
4. Troubleshooting
If Your Machine Does Not Operate As You Want..............................................95When a Message Is Displayed.................................................................................95
If You Cannot Make Clear Copies.......................................................................97If You Cannot Make Copies As You Want .........................................................98
When Memory Is Full .............................................................................................101
5. User Tools (Copier/Document Server Features)
User Tools Menu (Copier/Document Server Features) ..................................103Accessing User Tools (Copier/Document Server Features)..........................110
Changing Default Settings .....................................................................................110Exiting User Tools ..................................................................................................111
Settings You Can Change with User Tools .....................................................112General Features 1/5 ..............................................................................................112
General Features 2/5 ..............................................................................................113
General Features 3/5 ..............................................................................................114
General Features 4/5 ..............................................................................................115
General Features 5/5 ..............................................................................................115
Reproduction Ratio 1/2 ...........................................................................................116
Reproduction Ratio 2/2 ...........................................................................................116
Edit1/2.....................................................................................................................117
Edit 2/2....................................................................................................................118Stamp.....................................................................................................................121Input/Output ...........................................................................................................124Adjust Colour Image...............................................................................................125
6. Specifications
Combination Chart.............................................................................................127Supplementary Specifications..........................................................................128
INDEX....................................................................................................... 139
0816JupiterC1_GB_Copy_FM.book Page xi Monday, July 26, 2004 3:12 PM
xii
0816JupiterC1_GB_Copy_FM.book Page xii Monday, July 26, 2004 3:12 PM
1
Notice
Do not copy or print any item for which reproduction is prohibited by law.Copying or printing the following items is generally prohibited by local law:bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, pass-ports, driver's licenses.The preceding list is meant as a guide only and is not inclusive. We assume noresponsibility for its completeness or accuracy. If you have any questions con-cerning the legality of copying or printing certain items, consult with your legaladvisor.The colour samples in this manual may differ slightly from the colours of actualcopies.This machine is equipped with a function that prevents making counterfeit banknotes. Due to this function the original images similar to bank bills may not becopied properly.
0816JupiterC1_GB_Copy_FM.book Page 1 Monday, July 26, 2004 3:12 PM
2
How to Read This Manual
Symbols
This manual uses the following symbols:
R WARNING:This symbol indicates a potentially hazardous situation that might result indeath or serious injury if you misuse the machine by not following the instruc-tions under this symbol. Be sure to read the instructions, all of which are includ-ed in the Safety Information section in the General Settings Guide.
R CAUTION:This symbol indicates a potentially hazardous situation that might result in mi-nor or moderate injury or property damage that does not involve personal injurywhen you misuse the machine without following the instructions under thissymbol. Be sure to read the instructions, all of which are included in the SafetyInformation section in the General Settings Guide.• WARNINGS and CAUTIONS are notes for your safety.
ImportantIf these instructions are not followed, paper might misfeed, originals might bedamaged, or data might be lost. Be sure to read these instructions.
PreparationThis symbol indicates prior knowledge or preparations are required before op-eration.
NoteThis symbol indicates precautions for operation, or actions to be taken followinguser error.
LimitationThis symbol indicates numerical limits, functions that cannot be used together,or conditions in which a particular function cannot be used.
ReferenceThis symbol indicates where further relevant information can be found.
[ ]Keys that appear on the machine's display panel.
{ }Keys built into the machine's control panel.
0816JupiterC1_GB_Copy_FM.book Page 2 Monday, July 26, 2004 3:12 PM
3
Machine Types
This machine comes in three models which vary by copy speed. To confirmwhich model you have, see the inside front cover of this manual.
Type 1 Type 2 Type 3
Copy speed/B&W 28 copies/minute (A4K, 81/2" × 11"K)
32 copies/minute (A4K, 81/2" × 11"K)
38 copies/minute (A4K, 81/2" × 11"K)
Copy speed/Full Colour
20 copies/minute (A4K, 81/2" × 11"K)
24 copies/minute (A4K, 81/2" × 11"K)
28 copies/minute (A4K, 81/2" × 11"K)
0816JupiterC1_GB_Copy_FM.book Page 3 Monday, July 26, 2004 3:12 PM
4
Functions Requiring Optional Configurations
Certain functions require special machine configuration and extra options. Seethe table below.❍Required options
*1 The paper tray unit is required in order to install the finisher.
Function
Bat
ch
SAD
F
Mix
ed S
ize
Shif
t Sor
t
Stac
k
Stap
le
Stap
le (S
add
le S
titc
h)
Pun
ch
Auto Document Feed-er (ADF)
❍ ❍ ❍
2 tray finisher *1 ❍ ❍ ❍ ❍
Booklet finisher *1 ❍ ❍ ❍ ❍ ❍
0816JupiterC1_GB_Copy_FM.book Page 4 Monday, July 26, 2004 3:12 PM
5
Control Panel
This illustration shows the control panel of a machine with optionsfully installed.
1. Screen Contrast knobAdjusts display panel brightness.
2. {{{{User Tools/Counter}}}} key• User Tools
Press to change the defaults and con-ditions to meet your requirements.See p.103 “User Tools (Copier/Docu-ment Server Features)”.
• CounterPress to check or print the counter val-ue.See “Counter”, General Settings Guide.
• InquiryPress to find out where to order ex-pendable supplies and where to callwhen a malfunction occurs. You canalso print these details.See “Inquiry”, General Settings Guide.
3. IndicatorsDisplay the status of the machine or indi-cate errors.• d: Add Staple indicator• D: Add Toner indicator• B: Load Paper indicator• L: Service Call indicator• M: Open Cover indicator• x: Misfeed indicatorSee “Control Panel”, General SettingsGuide.
4. {{{{Adjust/Program Colour}}}} keyUse this key to adjust and register col-ours. See p.87 “Colour Adjustment/ Pro-gram”, p.92 “User Colour”.
Note❒ When image quality is adjusted, the
lamp in the {{{{Adjust/Program Colour}}}}key is lit.
5. Colour CircleRefer to this when adjusting colours. Seep.87 “Colour Adjustment”.
6. Display panelDisplays operation status, error messag-es, and function menus.See “Display Panel”, General SettingsGuide.
7. {{{{Check Modes}}}} keyPress to check the entered copy job set-tings.
8. {{{{Program}}}} keyPress to register frequently used settings,or recall registered settings. See p.85“Programs”.
9. {{{{Clear Modes}}}} keyPress to clear the previous copy job set-tings.
AAE001S
0816JupiterC1_GB_Copy_FM.book Page 5 Monday, July 26, 2004 3:12 PM
6
10. {{{{Energy Saver}}}} keyPress to switch into and out of EnergySaver mode. See “Saving Energy”, Gener-al Settings Guide.
11. {{{{Interrupt}}}} keyPress interrupt a long copy job to makecopies during copying or scanning. Seep.20 “Interrupt Copy”.
12. Main power indicator and OnindicatorThe main power indicator turns on whenyou turn on the main power. The On in-dicator lights when the power is on.
Important❒ Do not turn off the main power
switch while the On indicator isturning on or is flashing. The harddisk may malfunction.
13. Operation switchPress to turn the power on (the On indi-cator turns on). To turn the power off,press again (the On indicator turns off).See “Turning On the Power”, General Set-tings Guide.
14. {{{{Sample Copy}}}} keyPress to make a single set of copies orprints to check print quality before mak-ing multiple sets. See p.45 “Samplecopy”.
15. {{{{Start}}}} keyPress to start copying. Press to start scan-ning or printing documents stored usingthe Document Server function.
16. {{{{Clear/Stop}}}} key• Clear
Press to delete a number entered.• Stop
Press to stop a job in progress.
17. {{{{#}}}} keyPress to enter a numerical value.
18. Number keysPress to enter the number of copies anddata for a selected function.
19. Colour Selection Key (Copymode)Switch keys depending on the type oforiginal, or the copying purpose:{{{{Auto Colour Selection}}}} : {{{{Full Colour}}}} : {{{{Black & White}}}} : {{{{Single Colour}}}} : {{{{Two-colour}}}} : See p.29 “Colour Functions”
20. Function keysPress to select one of the following func-tions:• Copy: • Document Server: • Facsimile: • Printer: • Scanner:
21. Function status indicatorsDisplay the status of the above functions:
• Green: active• Red: interrupted
0816JupiterC1_GB_Copy_FM.book Page 6 Monday, July 26, 2004 3:12 PM
7
Display Panel
The function items displayed serve as selector keys. You can select or specify anitem by lightly pressing them.When you select or specify an item on the display panel, it is highlighted likethis: . Keys appearing as cannot be used.
Note❒ The following illustration is an example of the panel display when the booklet
finisher and 2 tray paper unit installed.
❖❖❖❖ Initial copy display
1. Original function, Image Densityand Special Original function.
2. Operational status and messages.
3. You can register up to three fre-quently used reduce/enlarge ratiosother than the fixed reduce/enlargeratios. See p.116 “Shortcut R/E”.
4. Numbers of originals scannedinto memory, copies set, and copiesmade.
5. Sort, Stack, Staple, Punch func-tions.
6. Displays contents of the Shortcutkeys. You can register frequentlyused functions in these keys. Seep.114 “Copy Function Key: F1-F5”.
7. Displays available functions.Press a function name to display itsmenu. For example, press [Reduce/En-large] to bring up the Reduce/Enlargemenu.
8. A clip mark indicates the current-ly selected function.
AAE013S
0816JupiterC1_GB_Copy_FM.book Page 7 Monday, July 26, 2004 3:12 PM
8
0816JupiterC1_GB_Copy_FM.book Page 8 Monday, July 26, 2004 3:12 PM
9
1. Placing Originals
Originals
Note❒ Highlighter pen colours are difficult to reproduce. Depending on the colour
used, they may not come out on copies, or may come out as a different colour.
Sizes and Weights of Recommended Originals
❖❖❖❖ Metric version
❖❖❖❖ Inch version
Note❒ The maximum number of originals that can be placed in the ADF is about 80.❒ The weight range for originals when using the Mixed Size function is 52–81
g/m2, 13.8–21.5 lb.
Where original is placed Original size Original weight
Exposure glass Up to A3 --
ADF One-sided originals:
A3L – B6 JIS (Japanese Industri-al Standard) KL
40–128 g/m2
Two-sided originals:
A3L – A5KL
52–105 g/m2
Where original is placed Original size Original weight
Exposure glass Up to 11" × 17" --
ADF One-sided originals:
11" × 17"L – 51/2" × 81/2"KL
11–34 lb.
Two-sided originals:
11" × 17"L – 51/2" × 81/2"KL
14–28 lb.
0816JupiterC1_GB_Copy_FM.book Page 9 Monday, July 26, 2004 3:12 PM
Placing Originals
10
1
Originals not recommended for the Auto Document Feeder (ADF)
Placing the following types of originals in the ADF can cause paper misfeeds orresult in damage to the originals. Place these originals on the exposure glass in-stead.• Originals other than those specified on p.9 “Sizes and Weights of Recom-
mended Originals”.• Stapled or clipped originals• Perforated or torn originals• Curled, folded, or creased originals• Pasted originals• Originals with any kind of coating, such as thermal fax paper, art paper, alu-
minum foil, carbon paper, or conductive paper• Originals with perforated lines• Originals with indexes, tags, or other projecting parts• Sticky originals such as translucent paper• Thin originals that have low stiffness• Thick originals such as postcards• Originals of inappropriate weight• Bound originals such as books• Transparent originals such as OHP transparencies or translucent paper
Note❒ The original might become dirty if it is written on with a pencil or a similar
instrument.
0816JupiterC1_GB_Copy_FM.book Page 10 Monday, July 26, 2004 3:12 PM
Originals
11
1
Sizes Detectable by Auto Paper Select
❍ : Detectable size × : Undetectable size
❖❖❖❖ Metric version
*1 You can select from 81/2" × 13", 81/4" × 13", 8" × 13" with User Tools (System Settings).*2 The machine cannot detect two-sided originals of B6 JIS size.
❖❖❖❖ Inch version
❖❖❖❖ Exposure glass
❖❖❖❖ ADF
Size A3L
B4 JISL
A4KL
B5 JISKL
A5KL
B6 JISKL
11" × 17"L
81/2" × 14"L
81/2" × 11"KL
51/2" × 81/2"KL
81/2" × 13"L *1
Location of the original
Exposure glass ❍ ❍ ❍ ❍ × × × × × × ❍
ADF ❍ ❍ ❍ ❍ ❍ ❍ *2 ❍ × ❍ × ❍
Size A3L
B4 JISL
A4KL
B5 JISKL
A5KL
11" × 17"L
81/2" × 14"L
81/2" × 11"KL
51/2" × 81/2"KL
81/2" × 13"L
10" × 14"LLocation of the
original
Exposure glass × × × × × ❍ ❍ ❍ × × ×
ADF ❍ × ❍ × × ❍ ❍ ❍ × × ×
CP01AEE
0816JupiterC1_GB_Copy_FM.book Page 11 Monday, July 26, 2004 3:12 PM
Placing Originals
12
1
Note❒ When copying custom size originals, make sure you specify the size of the
originals. If not, the image may not be copied properly. See p.17 “Placing cus-tom size originals”.
Sizes difficult to detect
It is difficult for the machine to automatically detect the sizes of the followingtypes of originals, so select the paper size manually.• Originals with indexes, tags, or other protrusions• Transparent originals such as OHP transparencies or translucent paper• Text or picture dense original• Originals containing solid images• Originals containing solid images around their edges
Missing Image Area
Even if you correctly place originals in the ADF or on the exposure glass, mar-gins of a few millimeters on all four sides of the original might not be copied.
1. 0.5 - 4.0 mm, 0"- 0.16"
2. 0.5 - 6.0 mm, 0"- 0.24"
3. 0.5 - 4.0 mm, 0"- 0.16"
4. 1.5 - 5.0 mm, 0.06"- 0.20"
0816JupiterC1_GB_Copy_FM.book Page 12 Monday, July 26, 2004 3:12 PM
Placing Originals
13
1
Placing Originals
Note❒ Place originals only when all cor-
rection fluid and ink has complete-ly dried. Not taking this precautioncould dirty the exposure glass, thusresulting in blemished copies.
ReferenceFor original sizes you can set, seep.9 “Originals”.
Original Orientation
This function is useful for copyingtorn originals or large originals.You can set the original orientation inthe following ways.
❖❖❖❖ Standard orientation Select this function when originalorientation is the same as copy pa-per orientation.
❖❖❖❖ 90°°°° turn Use this to copy A3K, B4 JISKor11" × 17"K size originals. The ma-chine rotates the copy image by90°. This is useful for copying largeoriginals using the Staple, Duplex,Combine, or Stamp functions.For example, to copy A3Kor 11" ×17"K originals with the Staplefunction selected:
Note❒ It is recommended that you use the
Original Orientation function withthe Auto Paper Select or Preset Re-duce/Enlarge function.
AAE043S
0816JupiterC1_GB_Copy_FM.book Page 13 Monday, July 26, 2004 3:12 PM
Placing Originals
14
1
AAAA Press [Special Original].
BBBB Select the original orientation.
Standard orientation
A Make sure is selected.
90° turn
A Place the original in the land-scape orientation, and thenpress .
CCCC Press [OK].
Placing Originals on the Exposure Glass
AAAA Lift the exposure glass cover orthe ADF.
Important❒ Do not lift the exposure glass
cover or the ADF forcefully.Otherwise, the ADF covermight open or be damaged.
Note❒ Be sure to lift the exposure glass
cover or ADF more than 30°.Otherwise, the size of the origi-nal might not be detected cor-rectly.
BBBB Place the original face down onthe exposure glass. It should bealigned with the rear left corner.
1. Positioning mark
2. Scale
Note❒ Start with the first page to be
copied.
CCCC Lower the exposure glass cover orADF.
ZLFH140E
0816JupiterC1_GB_Copy_FM.book Page 14 Monday, July 26, 2004 3:12 PM
Placing Originals
15
1
Placing Originals in the Auto Document Feeder
Settings should be made accordinglyin the following situations:
❖❖❖❖ When placing originals consisting ofmore than 80 pages:p.15 “Batch”
❖❖❖❖ When placing originals one by one:p.16 “SADF”
❖❖❖❖ When placing originals of the samewidth but different sizes:p.17 “Placing originals of mixedsizes”
❖❖❖❖ When placing custom size originals:p.17 “Placing custom size origi-nals”
Note❒ Do not stack originals above the
limit mark on the side guide of theADF.
❒ The last page should be on the bot-tom.
❒ Do not place objects on the sensorsor cover them with your hands, orthe original size may not be detect-ed properly. Also, do not place an-ything on the exposure glass coveras this could cause a malfunction.
1. Sensors
AAAA Set the document guide to theoriginal size.
BBBB Place the aligned originals faceup into the ADF.
1. Limit mark
2. Document guide
Note❒ Straighten any curls in the orig-
inals before placing them in theADF.
❒ To prevent multiple sheets frombeing fed at once, fan the origi-nals before placing them in theADF.
❒ Place the originals squarely.
Batch
The Batch mode enables you to copyoriginals of more than 80 pages as asingle document, even if you placethe originals into the ADF in instal-ments.
Important❒ Place special originals, such as
translucent paper, one by one.
0816JupiterC1_GB_Copy_FM.book Page 15 Monday, July 26, 2004 3:12 PM
Placing Originals
16
1
AAAA Press [Special Original].
BBBB Press [Batch], and then press [OK].
Note❒ If [SADF] is displayed, change
the settings. See p.124 “Switchto Batch (SADF)”.
CCCC Place the first instalment of theoriginals, and then press the{{{{Start}}}} key.
DDDD After the originals has been fed,place the next instalments.
EEEE When the Sort, Combine, or Du-plex function is set, press the {{{{#}}}}key after all originals have beenscanned.
FFFF Press the {{{{Start}}}} key.
SADF
In SADF mode, even when an origi-nal is placed one page at a time intothe ADF, each page is automaticallyfed as it is placed.
PreparationTo use the SADF function, set theUser Tools (Copier/DocumentServer Features) such that [SADF] isdisplayed when you press [SpecialOriginal]. See p.124 “Switch to Batch(SADF)”.
ReferenceFor related default settings, seep.116 “Shortcut R/E”.
AAAA Press [Special Original].
BBBB Press [SADF], and then press [OK].
CCCC Place one page of an original, andthen press the {{{{Start}}}} key.
DDDD When the machine instructs youto place another original, placethe next page.The second and subsequent pageswill feed in automatically withouta need to press the {{{{Start}}}} key.
Note❒ When the Sort, Combine or Du-
plex function is set, press the{{{{#}}}} key after all originals havebeen scanned.
❒ You can adjust the time the ma-chine waits before becomingready for the next original. Seep.124 “SADF Auto Reset”.
0816JupiterC1_GB_Copy_FM.book Page 16 Monday, July 26, 2004 3:12 PM
Placing Originals
17
1
Placing originals of mixed sizes
When placing different size originalsof the same width in the ADF togeth-er, the machine automatically checksthe sizes of the originals and makescopies.
Note❒ When placing same width origi-
nals of different sizes in the ADFand making copies without usingthe Mixed size function, parts ofthe original image might not becopied, or the paper might jam.
❒ Copy speed and scanning speedmay slow down.
❒ You can place originals of two dif-ferent sizes at once.
❒ Sizes of originals that can beplaced together using this functionare as follows:
AAAA Press [Special Original].
BBBB Press [Mixed Size], and then press[OK].
CCCC Align the rear and left edges ofthe originals as shown.
1. Place the originals into the ADF
2. Vertical size
DDDD Adjust the guide to the size of thewidest original.
EEEE Place the aligned originals faceup in the ADF.
FFFF Press the {{{{Start}}}} key.
Placing custom size originals
When placing custom size originals,specify the size of the originals.
Note❒ Paper with a vertical size of 128–
297 mm (5.1"–11.6") and a horizon-tal size of 128–432 mm (5.1"–17")can be placed with this function.
AAAA Press [Special Original].
BBBB Press [Custm Size Origi.].
Metric version
A3L, B4 JIS L, A4KL, B5 JISKL
Inch version
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
CP19AE
0816JupiterC1_GB_Copy_FM.book Page 17 Monday, July 26, 2004 3:12 PM
Placing Originals
18
1
CCCC Enter the horizontal size of theoriginal using the number keys,and then press [#].
Note❒ If you make a mistake, press
[Clear] or the {{{{Clear/Stop}}}} key,and then enter the value again.
DDDD Enter the vertical size of the origi-nal using the number keys, andthen press [#].
EEEE Press [OK].
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 18 Monday, July 26, 2004 3:12 PM
19
2. Copying
Basic Procedure
AAAA When the machine is set for usercodes, enter a user code (up toeight digits) using the numberkeys, and then press the {{{{#}}}} key.
The machine is now ready to copy.
ReferenceFor users codes, see “Key Oper-ator Tools”, General SettingsGuide.
BBBB Make sure "dddd Ready" is shownon the display.
If any other function is displayed,press the {{{{Copy}}}} key.
❖❖❖❖ Initial copy display
CCCC Make sure no previous settingsremain.
Note❒ When there are previous set-
tings remaining, press the {{{{ClearModes}}}} key before entering yoursettings.
DDDD Place the originals.
Referencep.13 “Placing Originals”
EEEE Make the necessary settings.
FFFF Enter the required number of cop-ies using the number keys.
Note❒ The maximum copy quantity
that can be set is between 1 and999.
GGGG Press the {{{{Start}}}} key.
Copying starts.
Note❒ When placing originals on the
exposure glass, press the {{{{#}}}}key after all the originals arescanned.
❒ Copies are delivered face down.
----How to operate
❖❖❖❖ To stop the machine during a multi-copy runPress the {{{{Clear/Stop}}}} key.
❖❖❖❖ To return the machine to the initialcondition after copyingPress the {{{{Clear Modes}}}} key.
❖❖❖❖ When clearing entered valuesPress the {{{{Clear/Stop}}}} key or [Clear]on the display.
❖❖❖❖ To check the settingsPress the {{{{Check Modes}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 19 Monday, July 26, 2004 3:12 PM
Copying
20
2
Interrupt Copy
Use this function to interrupt a longcopy job to make urgently neededcopies.
Limitation❒ You cannot use Interrupt Copy
when fax originals are beingscanned.
AAAA Press the {{{{Interrupt}}}} key.
The Interrupt indicator lights.
When scanning is interrupted
A Remove the originals that werebeing copied, and then placethe originals you want to copy.
B Press the {{{{Start}}}} key.Copying starts.
C When copying is complete, re-move the originals and copies.
D Press the {{{{Interrupt}}}} key again.The Interrupt indicator turnsoff.
E When the display prompts youto do so, place the former set oforiginals again.
F Press the {{{{Start}}}} key.
Note❒ The previous copy job's set-
tings are restored and themachine continues copyingfrom where it left off.
When the machine continues copying
A Place the originals you want tocopy.
B Press the {{{{Start}}}} key.The machine stops the previousjob and starts copying the neworiginals.
C When copying is complete, re-move originals and copies.
D Press the {{{{Interrupt}}}} key again.
The Interrupt indicator goesout.The previous copy job's settingsare restored and the machinecontinues copying from whereit left off.
0816JupiterC1_GB_Copy_FM.book Page 20 Monday, July 26, 2004 3:12 PM
Basic Procedure
21
2
Left Original Beeper
The beeper sounds and an error mes-sage is displayed if you leave origi-nals on the exposure glass aftercopying.
Note❒ See p.114 “Tone: Original remains”.
Job Preset
You can make settings for the nextcopy job while copying is in progress.If a long copy job is in progress andyou do not want to wait for it to finish,you can use this function to make set-tings for the next copy job in advance.When the current copy job finishes,the next job begins automatically.
AAAA Press [Next Job] when "Copying" isdisplayed.
BBBB Make settings for the next copyjob.
CCCC Place the originals in the ADF,and then press the {{{{Start}}}} key.All originals are scanned.
DDDD Press [To “Printing”].
Returns to the initial copy display.After the current copy job, the nextjob starts automatically.
Note❒ You can switch the display to
the current copy job by pressing[To “Printing”]. You can switchthe display to the preset job bypressing [To “Reserving”].
0816JupiterC1_GB_Copy_FM.book Page 21 Monday, July 26, 2004 3:12 PM
Copying
22
2
Copying from the Bypass Tray
Use the bypass tray to copy onto spe-cial paper such as OHP transparen-cies, thick paper, thin paper, and copypaper that cannot be loaded in the pa-per trays.
PreparationWhen copying from the bypasstray, select [1 Sided] for copying in[Dup./Combine/Series] (for example[1 Sided] → [1 Sided].)
Note❒ The machine can automatically de-
tect the following sizes as standardsize copy paper:
❒ Select the paper size when makinghorizontal copies.
❒ If you use non-standard size copypaper or special paper, you shouldinput its vertical and horizontal di-mensions directly. See p.17 “Plac-ing custom size originals”. Thesizes you can input are as follows:
❒ When copying onto OHP transpar-encies or paper heavier than 128g/m2 (about 34 lb.), you need tospecify the paper type. See p.24“When copying onto OHP Trans-parencies or Thick Paper”.
❒ You must specify the paper sizewhen using paper (tracing paper,etc.) of less than 59g/m2 thickness.
❒ The maximum number of sheetsyou can load at one time dependson paper type. The maximumnumber of sheets should not ex-ceed the upper limit.
❒ Some kinds of envelopes mightcause misfeed and wrinkle. If thishappens, push down the fusingunit's green lever. See p.26 “Whencopying onto envelopes”. Also, besure to place the front face of theenvelope downward.
❒ Paper of 433 mm in length, or larg-er, is likely to jam, crease, or notfeed in properly.
AAAA Open the bypass tray.
Metric version
A3L, A4L, A5L, B4 JISL, B5 JISL, B6 JISL
Inch version
11" × 17"L, 81/2" × 11"L, 51/2" × 81/2"L
Metric version
• Vertical: 90.0 – 305.0 mm
• Horizontal: 148.0 – 457.2 mm
Inch version
• Vertical: 3.55" – 12.00"
• Horizontal: 5.83" – 18.00"
ZKVH120J
0816JupiterC1_GB_Copy_FM.book Page 22 Monday, July 26, 2004 3:12 PM
Copying from the Bypass Tray
23
2
BBBB Insert the paper with the side youwant to copy facing up until youhear the beep, and align the paperguide to the paper size.
1: Extender
Important❒ If the guides are not flush
against the copy paper, imageskewing or misfeeds might oc-cur.
Note❒ Do not stack paper over the lim-
it mark, if you do image skew-ing or misfeeds might occur.
❒ Swing out the extender to sup-port paper sizes larger thanA4L, 81/2" × 11"L.
❒ Fan paper to get air between thesheets and avoid multi-sheetfeeds.
CCCC Select the paper type and size.
Note❒ When copying onto OHP trans-
parencies or thick paper, seep.24 “When copying onto OHPTransparencies or Thick Paper”.
❒ When copying on the back sideof paper, see p.25 “When Copy-ing on the Back Side of the Pa-per”.
When copying onto standard size paper
A Press the {{{{#}}}} key.
The "Bypass Tray Paper" screenis displayed.
B Press [Select Size].
C Select the paper size.
D Press [OK] twice.
When copying onto custom size paper
A Press the {{{{#}}}} key.
B Press [Custom Size].
C Enter the vertical size of the pa-per using the number keys,and then press [#].
ZKVH130J
0816JupiterC1_GB_Copy_FM.book Page 23 Monday, July 26, 2004 3:12 PM
Copying
24
2
D Enter the horizontal size of thepaper using the number keys,and then press [#].
Note❒ If [Horiz mm] is not highlight-
ed, press [Horiz mm].❒ To register the custom size
entered, press [Program], andthen press [Exit].
E Press [OK].
DDDD Place the originals, and then pressthe {{{{Start}}}} key.
Note❒ When the Sort function is set,
press the {{{{#}}}} key after all origi-nals have been scanned.
EEEE When your copy job is finished,press the {{{{Clear Modes}}}} key toclear the settings.
When copying onto OHP Transparencies or Thick Paper
To make copies onto OHP transpar-encies or thick paper, you need tospecify the paper type and size. Seep.23 “When copying onto standardsize paper”, p.23 “When copying ontocustom size paper”.
Important❒ We recommend you use OHP
transparencies made by this manu-facturer.
Note❒ Paper will be delivered to external
tray when copying onto OHPtransparencies or thick paper fromthe bypass tray, even if you havespecified not to use the externaltray as the output tray.
AAAA Open the bypass tray, and thenadjust the guides to the papersize.
BBBB Gently insert the OHP transpar-encies or thick paper face up untilthe beeper sounds.
Important❒ When copying onto OHP trans-
parencies, make sure that thecut positions are set properly.
❒ To avoid paper misfeeds, fanthe paper before loading it inthe tray.
CCCC Press the {{{{#}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 24 Monday, July 26, 2004 3:12 PM
Copying from the Bypass Tray
25
2
DDDD Select [OHP Sheet] or [Thick Paper].
EEEE Select the paper size.
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
Important❒ When copying onto OHP trans-
parencies, remove copied sheetsone by one.
HHHH When your copy job is finished,press the {{{{Clear Modes}}}} key toclear the settings.
When Copying on the Back Side of the Paper
Using the bypass tray, you can makecopies on the back of paper which hasalready been copied on the other side.
Note❒ Do not use paper that has already
been copied onto by other equip-ment.
❒ Copies made on the back side ofthe paper should be originals withvery little image area, such as textoriginals.
❒ If the paper is curled, straighten itout, and then insert it. If the paperis not straightened out, it can causepaper jams.
----Original and paper orientations
Pay attention to the orientation of pa-per and originals.
❖❖❖❖ Top to top
0816JupiterC1_GB_Copy_FM.book Page 25 Monday, July 26, 2004 3:12 PM
Copying
26
2
❖❖❖❖ Top to bottom
AAAA Open the bypass tray, and thenadjust the guides to the papersize.
BBBB Gently insert the copied paperwith the side you want to copyface up until the beeper sounds.
CCCC Press the {{{{#}}}} key.
DDDD Select the paper size.
EEEE Select [Plain: Dup.Back] or [Thick:Dup.Back].
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
When copying onto envelopes
Note❒ When placing an original on the
exposure glass, place the originalwith the bottom line aligned to theleft scale.
❒ When placing originals in theADF, place the originals with thebottom line inserted in the ADF.
❒ When inserting envelopes, be sureto unfold the flaps and positionthem opposite to the paper feed di-rection.
ReferenceFor more information about sup-ported size of envelope, see “Rec-o m m e nd ed Pape r S ize s andTypes”, General Settings Guide.
AAAA Open the bypass tray, and theninsert the envelopes with the sideyou want to copy face up until thebeeper sounds.
BBBB Align the paper guide to the enve-lope side.
CCCC Press the {{{{#}}}} key.
DDDD Select the paper size, and then se-lect [Thick Paper] for the papertype.
EEEE Press [OK].
AAE014S
0816JupiterC1_GB_Copy_FM.book Page 26 Monday, July 26, 2004 3:12 PM
Copying from the Bypass Tray
27
2
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
GGGG When your copy job is finished,press the {{{{Clear Modes}}}} key toclear the settings.
0816JupiterC1_GB_Copy_FM.book Page 27 Monday, July 26, 2004 3:12 PM
Copying
28
2
Making A3, 11" ×××× 17" Full Bleed Copies
You can make A3, 11" × 17" full bleed copies with 12" × 18" paper. This is usefulfor making A3, 11" × 17" size copies with a coloured background (e.g. cata-logues).
1. A3, 11" ×××× 17" size Original
2. In standard copy mode, marginsappear on copies
3. 12" ×××× 18" Full Bleed Copy
4. Cut around the margins to pro-duce a full image
Note❒ You can use this function with 12" × 18" paper.❒ When A3, 11" × 17" full bleed copying is made, the original image is copied
onto the center.❒ You can only use this function with the bypass tray.
0816JupiterC1_GB_Copy_FM.book Page 28 Monday, July 26, 2004 3:12 PM
Colour Functions
29
2
Colour Functions
Selecting a Colour Mode
Select a Colour mode that best suitsyour originals and copying require-ments.
ReferenceFor colour images, see p.iii “WhatYou Can Do with This Machine<Colour Functions/Colour Ad-justments>”
The following basic functions are ex-plained in this section.
❖❖❖❖ Auto Colour SelectionJudges the colour of the originalautomatically, and copies either infull colour or black/white.
❖❖❖❖ Full Colour CopyCopies by overlaying yellow, ma-genta, cyan, and black.
❖❖❖❖ Black/White CopyCopies in black regardless of thecolour of the original.
❖❖❖❖ Single Colour CopyCopies in one designated colour.
Note❒ Yellow, magenta, and cyan will
be copied with one toner colour,but beige, orange, red, lightgreen, pink, green, marine blue,blue and purple uses 2 tonercolours to copy.
❖❖❖❖ Two Colour Copy• Two Colour Copy (Normal)
Copies black and other parts intwo specified colours.
Note❒ You can select from basic col-
ours and registered colours.• Two Colour Copy (Red & Black)
Copies the red part in red, andall the other parts in black orwhite.
Note❒ When the width of the colour
is set to “Wider”, coloursclose to orange and purplewill be recognized as red.This adjustment will be validin “Erase Colour” and “Con-vert Colours” . See p.125“Colour Sensitivity”
AAAA Select the type of colour key.
0816JupiterC1_GB_Copy_FM.book Page 29 Monday, July 26, 2004 3:12 PM
Copying
30
2
When the {{{{Single Colour}}}} key is selected
AAAA Select designation method of col-our ( [Basic Colour], [User Colour] ).
BBBB Select the colour, and then press[OK].
Note❒ When copied using the regis-
tered colour, the original will becopied lighter than the regis-tered colour.
❒ Press [Lighter] or [Darker], andyou can adjust the density in 4steps.
When the {{{{Two-colour}}}} key is selected
AAAA Select either [Two-colour] or [Red &Black].
When [Red & Black] is pressed
A Press [OK].
When [Two-colour] is pressed
A Press [Change Colour Setting].
B Press [Black Portion], and thenselect the colour to be replacedby black.
Note❒ When selecting a colour from
the user colours, press [UserColour].
C Press [Non-black Portion], andthen select the colour to replacethe black colour of the original.
D Press [OK] twice.
0816JupiterC1_GB_Copy_FM.book Page 30 Monday, July 26, 2004 3:12 PM
Colour Functions
31
2
Convert Colours
Copies by changing the colour in theoriginal to a different colour.
Note❒ It is possible to specify up to 4 col-
ours.❒ The width of the colour to be con-
verted can be adjusted in 5 levels.If the colour width is set to “Wid-er” and red has been specified, col-ours which are close to magenta ororange, will also be converted. Thecolour width can be adjusted in the“User Tools”. See p.125 “ColourSensitivity”
AAAA Press the {{{{Full Colour}}}} key.
BBBB Press [Edit/Colour Creation].
CCCC Press [Colour Creation].
DDDD Press [Convert Colour].
EEEE Select any one item from [Conver-sion 1] to [Conversion 4].
FFFF Select the colour to be converted.
GGGG Select the new colour to be con-verted.
Note❒ You can adjust the density of
each colour in 4 levels.❒ When you want to change the
converted colour, press from[Conversion 1] to [Conversion 4]and make the selection again.
❒ When changing between morethan two colours, repeat steps Eto G.
Selecting from [User Colour]
A Press [User Colour].
B Select from the registered col-ours, then press [OK].
HHHH After selecting all the colours tobe converted, press [OK].
IIII Press [OK] 3 times.
JJJJ Place the originals, and then pressthe {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 31 Monday, July 26, 2004 3:12 PM
Copying
32
2
Erase Colour
You can erase a certain colour in theimage of the original.
Note❒ It is possible to select up to 4 col-
ours.❒ The width of the colour to be delet-
ed can be adjusted in 5 levels. If thecolour width is set to “Wider” andred has been specified, colourswhich are close to magenta or or-ange, will also be deleted. The col-our width can be adjusted in the“User Tools”. See p.125 “ColourSensitivity”
AAAA Press [Edit/Colour Creation].
BBBB Press [Colour Creation].
CCCC Press [Erase Colour].
DDDD Select the colour to be erased.
Note❒ You can cancel the selection by
pressing the selected (highlight-ed) key.
❒ You can erase 4 colours at once.
EEEE Press [OK] after selecting all thecolours to be deleted.
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
Colour Background
Copies by adding a colour in thewhole page.
Note❒ Since the Colour Background func-
tion overprints the entire original,the co lour of the image maychange.
AAAA Press [Edit/Colour Creation].
BBBB Press [Colour Creation].
CCCC Press [Colour Background].
DDDD Select the background colour,then press [OK].
Note❒ You can adjust the density of
each colour in 4 levels.❒ You can cancel the selection by
pressing the selected (highlight-ed) key.
Selecting from the [User Colour]
A Press [User Colour].
B Select a registered colour, andthen press [OK].
EEEE Press [OK] twice.
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 32 Monday, July 26, 2004 3:12 PM
Copier Functions
33
2
Copier Functions
Adjusting Copy Image Density
There are three types of adjustmentavailable:
❖❖❖❖ Auto Image Density The machine automatically adjustsimage density.
❖❖❖❖ Manual image densityYou can adjust the general densityof the original in nine increments.
❖❖❖❖ Combined auto and manual imagedensityUse when copying originals withdirty backgrounds (such as news-papers) . You can adjust fore-ground density while leaving thebackground unchanged.
Auto image density
AAAA Make sure [Auto Image Density] isselected.
Manual image density
AAAA Press [Auto Image Density] to cancelit.
BBBB Press [Lighter] or [Darker] to adjustimage density.
Combined auto and manual image density
AAAA Make sure [Auto Image Density] isselected.
BBBB Press [Lighter] or [Darker] to adjustimage density.
0816JupiterC1_GB_Copy_FM.book Page 33 Monday, July 26, 2004 3:12 PM
Copying
34
2
Selecting the Original Type
Select one of the following six types tomatch originals:
❖❖❖❖ Text When originals contain only text(no pictures).
❖❖❖❖ Text/PhotoWhen originals contain photo-graphs or pictures alongside thetext.
❖❖❖❖ Photo When you need to reproduce deli-cate tones of photographs and pic-tures.
Note❒ If you select “Text/Photo” or
“Photo” as the original type, se-lect the photo type from amongthe three options below:• Glossy Photo
Use when copying devel-oped photographs.
• Printed PhotoUse when copying photo-graphs or pictures that areprinted on paper (e.g. maga-zines).
• Copied PhotoUse when copying copies ororiginals generated by print-ers.
❖❖❖❖ Generation CopyWhen originals are copies (genera-tion copies), the copy image can bereproduced sharply and clearly.
❖❖❖❖ Pale When you need to reproduce orig-inals that have lighter lines in pen-cil, or faintly copied slips. Faintlines are copied with greater clari-ty.
❖❖❖❖ MapYou can configure the machine toscan Map originals. If “OriginalType Display” has been set to“Display” (from Copier/Docu-ment Server Features on the UserTools menu), select “Map” fromthe “Others” menu. If “OriginalType Display” has been set to“Hide”, select “Map” from the“Original Type” menu.
Referencep.112 “Original Type Display”p.112 “Original Photo Type Priori-ty”
AAAA Press the appropriate key to selectthe original type.
If the original type keys are not displayed
A Press [Original Type].
B Select the original type, andthen press [OK].
0816JupiterC1_GB_Copy_FM.book Page 34 Monday, July 26, 2004 3:12 PM
Copier Functions
35
2
Selecting Copy Paper
There are two ways to select copy paper:
❖❖❖❖ Auto Paper SelectThe machine selects a suitable size of copy paper automatically based on orig-inal size and reproduction ratio.
❖❖❖❖ Manual Paper SelectChoose the paper you want to copy onto from a paper tray, bypass tray, orLarge Capacity Tray (LCT).
Referencep.12 “Sizes difficult to detect”p.112 “Paper Display”
Note❒ See the following table for copy paper sizes and orientations that can be used
with Auto Paper Select (when copying at a ratio of 100%).
❖❖❖❖ Metric version
❖❖❖❖ Inch version
❒ Only the paper trays set to [No display] or [Recycled paper] in Paper Type andalso set to [Yes] in Apply Auto Paper Select can be selected for the Auto PaperSelect function. See “Paper Type: Tray 1–4” in “Tray Paper Settings”, GeneralSettings Guide.
❒ Auto Paper Select cannot be used if all the paper trays are set to other than [Nodisplay] or [Recycled paper].
Where original is placed Paper size and orientation
Exposure glass A3L, B4 JISL, A4KL, B5 JISKL
ADF A3L, B4 JISL, A4KL, B5 JISKL, A5K, 11”× 17”L, 81/2" × 11"KL
Where original is placed Paper size and orientation
Exposure glass 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
ADF A3L, A4KL, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
0816JupiterC1_GB_Copy_FM.book Page 35 Monday, July 26, 2004 3:12 PM
Copying
36
2
Auto Paper Select
AAAA Make sure [Auto Paper Select] is selected.
Note❒ Trays with a key mark are not automatically selected. See “Paper Type” in
“Tray Paper Settings”, General Settings Guide.
Manual Paper Select
AAAA Select the paper tray, bypass tray or LCT.The selected paper tray is highlighted.
Referencep.22 “Copying from the Bypass Tray”
If the paper type keys are not displayed
A Press [Auto Paper Select].B Select the paper type.
0816JupiterC1_GB_Copy_FM.book Page 36 Monday, July 26, 2004 3:12 PM
Copier Functions
37
2
----Rotated copyIf the orientation of the original (L or K) is different to that of the paper you arecopying onto, this function rotates the original image by 90°, fitting it onto thecopy paper. This function works when [Auto Paper Select] or [Auto Reduce/En-large] is selected. See p.35 “Auto Paper Select”, p.40 “Auto Reduce/Enlarge”.
Note❒ The default setting for Auto Tray Switching is [With Image Rotation]. You
cannot use the Rotated Copy function if this setting is changed to [WithoutImage Rotation] or [Off]. See p.113 “Auto Tray Switching”.
❒ You cannot use the Rotated Copy function when enlarging onto A3, B4 JIS or11" × 17", 81/2" × 14" size paper. To do this, place the original in the L orien-tation.
❒ When using the 2 tray finisher, you cannot use the Rotated Copy functionwhen [Left 2], [Top 2] or [Punch] is selected for stapling. See p.47 “Staple”, p.51“Punch”.
❒ When using the booklet finisher, you cannot use the Rotated Copy functionwhen [Left 2], [Top 2] or [Saddle Stitch] is selected for stapling.
Original size and orientation
Copy paper size and orientation
You cannot rotate:
A4, B5 JIS, or A5
K
When enlarg-ing to →
B4 JIS or A3
However, you can use:
A4, B5 JIS, or A5
L
When enlarg-ing to →
B4 JIS or A3
GCROTA0E
GCROTA1E
GCROTA2E
GCROTA3EGCROTA4E
0816JupiterC1_GB_Copy_FM.book Page 37 Monday, July 26, 2004 3:12 PM
Copying
38
2
Preset Reduce/Enlarge
You can select a preset ratio for copy-ing.
❖❖❖❖ Base PointThe base point of Reduce/Enlargediffers depending on how the orig-inal was scanned. When the origi-nal is placed on the exposure glass,the upper left corner is the basepoint. When placed in the ADF, thebottom left corner is the base point.
1. Base point when placed on the ex-posure glass.
2. Base point when placed in theADF.
ReferenceRelated default settings:p.116 “Shortcut R/E”p.117 “R/E Priority”
AAAA Press [Reduce/Enlarge].
Note❒ To select a preset ratio on the in-
itial display, press the shortcutreduce/enlarge key, and thenproceed to step D.
BBBB Press [Enlarge] or [Reduce].
CCCC Select a ratio, and then press [OK].
DDDD Place originals, and then press the{{{{Start}}}} key.
----Create margin functionUse Create Margin to reduce the im-age to 93% of original size using thecentre as reference. You can assignthis function to a shortcut key on theinitial display. By combining it withthe Reduce/Enlarge function, youcan also provide the Reduce/Enlargecopy with a margin.
ReferenceRelated default settings:p.114 “Copy Function Key: F1-F5”p.117 “Ratio for Create Margin”
GCKA031e
0816JupiterC1_GB_Copy_FM.book Page 38 Monday, July 26, 2004 3:12 PM
Copier Functions
39
2
A Press [Create Margin] on the initialdisplay.
B If you do not want to combine itwith the Reduce/Enlarge function,place originals, and then press the{{{{Start}}}} key.
Zoom
You can change the reproduction ra-tio in increments of 1%.
Note❒ You can select a preset ratio close
to the ratio using [Reduce] or [En-large], and then adjust it further,using [nnnn] or [oooo].
AAAA Press [Reduce/Enlarge].
BBBB Enter the ratio.
To select the ratio using [nnnn] and [oooo]
A Select a preset ratio close to theratio using [Reduce] or [Enlarge].
B Adjust the ratio further, using[nnnn] or [oooo].
Note❒ Pressing [nnnn] or [oooo] changes
the ratio in increments of 1%.Pressing and holding down[nnnn] or [oooo] changes it in in-crements of 10%.
❒ If you have incorrectly en-tered the ratio, readjust it us-ing [nnnn] or [oooo].
To enter the ratio using the number keys
A Press [Mag. Ratio].
B Enter the ratio using thenumber keys.
C Press [#].
D Press [OK].
CCCC Place the originals, and then pressthe {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 39 Monday, July 26, 2004 3:12 PM
Copying
40
2
Auto Reduce/Enlarge
The machine can choose an appropri-ate reproduction ratio based on thepaper and original sizes you select.
Note❒ You cannot use the bypass tray
with this function.❒ When using Auto Reduce/En-
large, see the following table fororiginal sizes and orientations youcan use:
❖❖❖❖ Metric version
❖❖❖❖ Inch version
❒ You cannot use the Rotated Copyfunction when enlarging to B4 JIS,A3 or 81/2" × 14", 11" × 17". Whenenlarging to B4 JIS, A3 or 81/2" ×14", 11" × 17" size copy paper, placethe original in the L orientation.
Referencep.12 “Sizes difficult to detect”
You can place originals of differentsizes in the ADF at the same time. Seep.17 “Placing originals of mixed siz-es”.
AAAA Press [Auto Reduce/Enlarge].
BBBB Select the paper tray.
CCCC Place the originals, and then pressthe {{{{Start}}}} key.
Where original is placed
Original size and orientation
Exposure glass A3L, B4 JISL, A4KL, B5 JISKL
ADF A3L, B4 JISL, A4KL, B5 JISKL, A5KL, B6 JISKL, 11”× 17”L, 81/2" × 11"KL
Where original is placed
Original size and orientation
Exposure glass 11" × 17"L, 81/2" × 14"L, 81/2" × 11KL
ADF A3L, A4LK, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL, 51/2" × 81/2"KL, 10" × 14"L, 71/4" × 101/2"KL
0816JupiterC1_GB_Copy_FM.book Page 40 Monday, July 26, 2004 3:12 PM
Copier Functions
41
2
Size Magnification
You can calculate an enlargement orreduction ratio based on the lengthsof the original and copy.
Note❒ Measure and specify the lengths of
the original and copy by compar-ing "A" with "a".
AAAA Press [Reduce/Enlarge].
BBBB Press [Specifd. Ratio].
CCCC Make sure [Size Magnificatn] ishighlighted.
DDDD Enter the length of the originalusing the number keys, and thenpress [#].
Note❒ You can enter sizes within the
following ranges:
EEEE Enter the length of the copy usingthe number keys, and then press [#].
Note❒ To change the length after
pressing [#], select [Original] or[Copy], and then enter thelength.
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
Directional Magnification (%)
Copies can be reduced or enlarged atdifferent reproduction ratios, hori-zontally and vertically.
a: Horizontal ratiob: Vertical ratio
Note❒ You can also select a preset ratio
close to the ratio using [Reduce] or[Enlarge], and then adjust it further,using [nnnn] or [oooo].
AAAA Press [Reduce/Enlarge].
Metric version
1–999 mm (increments of 1 mm)
Inch version
0.1"–99.9" (increments of 0.1")
CP2P01EE
0816JupiterC1_GB_Copy_FM.book Page 41 Monday, July 26, 2004 3:12 PM
Copying
42
2
BBBB Press [Specifd. Ratio].
CCCC Press [Direct. Mag.%].
To enter the ratio using the number keys
A Press [Horizontal].
B Enter the ratio using thenumber keys, and then press[#].
C Press [Vertical].
D Enter the ratio using thenumber keys, and then press[#].
E Press [OK].
To specify a ratio using [nnnn] and [oooo]
A Press [With nnnnoooo].
B Press [Horizontal].C Adjust the ratio using [nnnn] or
[oooo].
Note❒ Pressing [nnnn] or [oooo] changes
the ratio in increments of 1%.Pressing and holding down[nnnn] or [oooo] changes it in in-crements of 10%.
❒ If you have incorrectly en-tered the ratio, readjust it us-ing [nnnn] or [oooo].
D Press [Vertical].
E Adjust the ratio using [nnnn] or[oooo].
F Press [OK].
DDDD Press [OK].
EEEE Place the originals, and then pressthe {{{{Start}}}} key.
Directional Size Magnification (mm)
A suitable reproduction ratio is auto-matically selected when you enter thehorizontal and vertical lengths of theoriginal and copy image you require.
1. Horizontal original size
2. Vertical original size
3. Horizontal copy size
4. Vertical copy size
PreparationSpecify the vertical and horizontalsize of the original and that of thecopy, as shown.
Note❒ You can enter sizes within the fol-
lowing ranges:
Metric version
Vertical: 1–999 mm (increments of 1 mm)
Horizontal: 1–999 mm (increments of 1 mm)
Inch version
0.1"–99.9" (increments of 0.1")
CP2M01EE
0816JupiterC1_GB_Copy_FM.book Page 42 Monday, July 26, 2004 3:12 PM
Copier Functions
43
2
AAAA Press [Reduce/Enlarge].
BBBB Press [Specifd. Ratio].
CCCC Press [Dir. Size Mag mm].
DDDD Enter the horizontal size of theoriginal using the number keys,and then press [#].
EEEE Enter the horizontal size of thecopy using the number keys, andthen press [#].
FFFF Enter the vertical size of the origi-nal using the number keys, andthen press [#].
GGGG Enter the vertical size of the copyusing the number keys, and thenpress [#].
Note❒ To change the length, press the
key you want to change, andthen enter the new value.
HHHH Press [OK] twice.
IIII Place the originals, and then pressthe {{{{Start}}}} key.
Sort
The machine can scan originals intomemory and automatically sort cop-ies.
ReferenceRelated default settings:p.124 “Select Stack Function”p.124 “Memory Full Auto Scan Re-start”p.124 “Rotate Sort: Auto PaperContinue”p.113 “Auto Tray Switching”
❖❖❖❖ SortCopies are assembled as sequen-tially-ordered sets.
❖❖❖❖ Rotate SortEvery other copy set is rotated by90°KL and delivered to the copytray.
Note❒ To use the Rotate Sort function,
two paper trays with paper ofthe same size and type, but dif-ferent orientation (KL), are re-qu i red . See ”Pap er T ype :Tray1-4”, General Settings Guide.
❒ You cannot use the bypass traywith this function.
0816JupiterC1_GB_Copy_FM.book Page 43 Monday, July 26, 2004 3:12 PM
Copying
44
2
❖❖❖❖ Shift Sort• When a finisher is installed:
Each time the copies of one setor a job are delivered, the nextcopy is shifted to separate eachset or job.
Note❒ You cannot use the bypass
tray with this function.
AAAA Press [Sort] or [Rotate Sort].
❖❖❖❖ When a finisher is not installed
❖❖❖❖ When the 2 tray finisher is installed
❖❖❖❖ When the booklet finisher is installed
Note❒ When the optional finisher is in-
stalled, use the User Tools todisplay [Rotate Sort]. See p.124“Select Stack Function”.
BBBB Enter the number of copy sets us-ing the number keys.
Limitation❒ The maximum number of sets is
999.
Note❒ To confirm the type of finishing,
press the {{{{Sample Copy}}}} key. Seep.45 “Sample copy”.
CCCC Place the originals.
Note❒ When placing originals on the
exposure glass, start with thefirst page to be copied. Whenplacing originals in the ADF, setthe first page on top.
❒ When placing originals on theexposure glass or in the ADF us-ing the Batch function, press the{{{{#}}}} key after all the originalshave been scanned.
DDDD Press the {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 44 Monday, July 26, 2004 3:12 PM
Copier Functions
45
2
Sample copy
You can use this function to checkcopy settings before making a longcopy run.
Note❒ This function can be used only
when the Sort function is turnedon.
AAAA Select Sort and any other neces-sary functions, and then place theoriginals.
BBBB Press the {{{{Sample Copy}}}} key.
One copy set is delivered as a sam-ple.
CCCC If the sample is acceptable, press[Print].The specified number of copies ismade, minus one for the proofcopy.
Note❒ If you press [Suspend] after
checking the results, return tostep A to adjust the copy set-tings as necessary. You canchange the settings for Staple,Duplex, Copy Orientation,Stamp, Margin Adjust., andCover/Slip Sheet. However, de-pending on the combination offunctions, you may not be ableto change certain settings.
Changing the number of sets
You can change the number of copysets during copying.
Note❒ This function can only be used
when the Sort function is turnedon.
AAAA While "Copying" is displayed,press the {{{{Clear/Stop}}}} key.
BBBB Press [Change Quantity].
CCCC Enter the number of copy sets us-ing the number keys, and thenpress the {{{{#}}}} key.
Note❒ The number of sets you can en-
ter differs depending on whenthe {{{{Clear/Stop}}}} key is pressed.
DDDD Press [Continue].
Copying starts again.
0816JupiterC1_GB_Copy_FM.book Page 45 Monday, July 26, 2004 3:12 PM
Copying
46
2
Stack
Copies can be assembled with eachpage shifted.
❖❖❖❖ When a finisher is installedThis function groups together cop-ies of each page in a multi-pageoriginal. Every other page stack isshifted for ease of separation.
Note❒ You cannot use the bypass tray
with this function.
AAAA Press [Stack].
BBBB Enter the number of copies usingthe number keys.
CCCC Place the originals, and then pressthe {{{{Start}}}} key.
Note❒ When placing originals on the
exposure glass, start with thefirst page to be copied. Whenplacing originals in the ADF, setthe first page on top.
❒ When placing originals on theexposure glass or in the ADF us-ing the Batch function, press the{{{{#}}}} key after all the originalshave been scanned.
333
0816JupiterC1_GB_Copy_FM.book Page 46 Monday, July 26, 2004 3:12 PM
Copier Functions
47
2
Staple
Individual copy sets can be stapled.
Note❒ You cannot use the bypass tray with this function.
Referencep.125 “Select Stapling Position”
Stapling position and original setting
Place all the originals in an orientation in which they can be read. They will beautomatically rotated for copying. When copy paper is identical in size and ori-entation to the original, staple positions are as follows:
❖❖❖❖ 2 tray finisher
Original location Stapling position *1
Exposure glass ADF
Top
K
L
Top
Sla
nt
K
L
0816JupiterC1_GB_Copy_FM.book Page 47 Monday, July 26, 2004 3:12 PM
Copying
48
2
Bot
tom
K
L
Lef
t 2
K *2
L
Top
2
K
L *2
Original location Stapling position *1
Exposure glass ADF
0816JupiterC1_GB_Copy_FM.book Page 48 Monday, July 26, 2004 3:12 PM
Copier Functions
49
2
❖❖❖❖ Booklet finisher
*1 This table shows the stapling positions, not the orientation of delivery.*2 Not available for A3, B4 JIS or 11" × 17", 81/2" × 14" size paper.
Original location Stapling position *1
Exposure glass ADF
Top
K
L
Bot
tom
K
L
Lef
t 2
K *2
L
Top
2
K
L *2
Sad
dle
Sti
tch L
0816JupiterC1_GB_Copy_FM.book Page 49 Monday, July 26, 2004 3:12 PM
Copying
50
2
AAAA Select one of the stapling positions.
❖❖❖❖ 2 tray finisher
❖❖❖❖ Booklet finisher
Note❒ When you select the stapling position, the Sort function is automatically se-
lected.
Referencep.47 “Stapling position and original setting”p.132 “Staple”
BBBB Enter the number of copy sets using the number keys.
CCCC Place the originals, and then press the {{{{Start}}}} key.
Note❒ When placing originals on the exposure glass, start with the first page to
be copied. When placing originals in the ADF, set the first page on top.❒ When placing originals on the exposure glass or in the ADF using the
Batch function, press the {{{{#}}}} key after all the originals have been scanned.
0816JupiterC1_GB_Copy_FM.book Page 50 Monday, July 26, 2004 3:12 PM
Copier Functions
51
2
Punch
You can make punch holes in copies.
❖❖❖❖ 2 holes
❖❖❖❖ 3 holes
❖❖❖❖ 4 holes
Note❒ 3 holes is only available with the 2 tray finisher.❒ You cannot use the bypass tray with this function.❒ The relationship between the orientation in which you place the original and
the punch hole positions is as follows:
GCPNCH1E
GCPNCH3E
GCPNCH0E
0816JupiterC1_GB_Copy_FM.book Page 51 Monday, July 26, 2004 3:12 PM
Copying
52
2
Punch hole positions
❖❖❖❖ 2 tray finisher
Original location Punch hole positions
*1 Exposure glass ADF
Stan
dar
d
2 holes K
L
3 holes K
L
4 holes K
L
0816JupiterC1_GB_Copy_FM.book Page 52 Monday, July 26, 2004 3:12 PM
Copier Functions
53
2
90º T
urn
2 holes K
L
3 holes K
L
4 holes K
L
Original location Punch hole positions
*1 Exposure glass ADF
0816JupiterC1_GB_Copy_FM.book Page 53 Monday, July 26, 2004 3:12 PM
Copying
54
2
❖❖❖❖ Booklet finisher
*1 This table shows the punch hole positions, not the orientation of delivery.
AAAA Select one of the punch hole positions.
BBBB Enter the number of copy sets with the number keys.
CCCC Place the originals, and then press the {{{{Start}}}} key.
Original location Punch hole positions
*1 Exposure glass ADF
Stan
dar
d
2 holes K
L
4 holes K
L
90º T
urn
2 holes K
L
4 holes K
L
0816JupiterC1_GB_Copy_FM.book Page 54 Monday, July 26, 2004 3:12 PM
Copier Functions
55
2
Duplex
There are three types of duplex cop-ies:
❖❖❖❖ 1 Sided→→→→2 SidedCopies 2 one-sided pages onto atwo-sided page.
❖❖❖❖ 2 Sided→→→→2 SidedCopies 1 two-sided page onto atwo-sided page.
❖❖❖❖ 2 Sided→→→→1 SidedCopies each side of a two-sidedoriginal onto two separate pages.
Original orientation and completed copies
Copy images differ according to theorientation in which you place origi-nals (vertical K or horizontal L ).
*1 This table shows the orientation of im-ages on the front and back of copies,not the orientation of delivered copies.
Note❒ You cannot use the bypass tray
with this function.❒ The maximum paper weight that
can be used with duplex copying is60–105 g/m2, 16–28 lb.
Referencep.69 “Margin Adjustment”Related default settings:p.117 “Front Margin: Left/Right”p.117 “Back Margin: Left/Right”p.117 “Front Margin: Top/Bot-tom”p.117 “Back Margin: Top/Bottom”
0816JupiterC1_GB_Copy_FM.book Page 55 Monday, July 26, 2004 3:12 PM
Copying
56
2
AAAA Press [Dup./Combine/Series].
Note❒ You can also select "1 Sided to 2
Sided" or "2 Sided to 2 Sided" di-rectly, by pressing the CopyFunction Key. If you do this,proceed to step D.
BBBB Select [1 Sided] or [2 Sided] forOriginal, and then select [1 Sided]or [2 Sided] for Copy.
Note❒ To change the copy orientation,
press [Orientation]. See p.56“Originals and copy orienta-tion”.
CCCC Press [OK].
DDDD Place the originals, and then pressthe {{{{Start}}}} key.
Note❒ When placing originals on the
exposure glass, start with thefirst page to be copied. Whenplacing originals in the ADF, setthe first page on top.
❒ When placing originals on theexposure glass or in the ADF us-ing the Batch function, press the{{{{#}}}} key after all the originalshave been scanned.
Originals and copy orientation
You can select the orientation.• Top to Top
• Top to Bottom
Note❒ You can change the default orien-
tation with User Tools. See p.113“Copy Orientation in DuplexMode” and p.113 “Original Orien-tation in Duplex Mode”.
AAAA Press [Dup./Combine/Series].
BBBB Press [Orientation], select the orien-tation (Original/Copy), and thenpress [OK].
CCCC Press [OK].
DDDD Place originals, and then press the{{{{Start}}}} key.
Duplex1
Duplex2
0816JupiterC1_GB_Copy_FM.book Page 56 Monday, July 26, 2004 3:12 PM
Copier Functions
57
2
1 Sided Combine
Combine several pages onto one sideof a sheet.
❖❖❖❖ 1 Sided 2 Pages →→→→ Combine 1 SideCopies 2 one-sided originals ontoone side of a sheet.
❖❖❖❖ 1 Sided 4 Pages →→→→ Combine 1 SideCopies 4 one-sided originals ontoone side of a sheet.
❖❖❖❖ 1 Sided 8 Pages →→→→ Combine 1 Side Copies 8 one-sided originals ontoone side of a sheet.
❖❖❖❖ 2 Sided 1 Page →→→→ Combine 1 SideCopies 1 two-sided original ontoone side of a sheet.
❖❖❖❖ 2 Sided 2 Pages →→→→ Combine 1 Side Copies 2 two-sided originals ontoone side of a sheet.
❖❖❖❖ 2 Sided 4 Pages →→→→ Combine 1 Side Copies 4 two-sided originals ontoone side of a sheet.
❖❖❖❖ 2 Sided 8 Pages →→→→ Combine 1 SideCopies 8 two-sided originals ontoone side of a sheet.
❖❖❖❖ Orientation of the original and com-bine image position• Open to leftR originals
• Open to top S originals
❖❖❖❖ Placing originals (originals placed inthe ADF)• Originals read from left to right
• Originals read from top to bot-tom
Note❒ You cannot use the bypass tray
with this function.
GCSHVY7E
GCSHUY1E
GCSHUY2E
Combine5
3 41 2
4321
Combine6
34124321
0816JupiterC1_GB_Copy_FM.book Page 57 Monday, July 26, 2004 3:12 PM
Copying
58
2
ReferenceRelated default settings:p.118 “Erase Original Shadow inCombine”p.119 “Copy Order in Combine”p.120 “Separation Line in Com-bine”
AAAA Press [Dup./Combine/Series].
Note❒ You can select "1 Sided 2 Pages
→ Combine 1 Side" or "1 Sided 4Pages → Combine 1 Side" by us-ing Copy Function key. In thiscase, proceed to step F.
BBBB Press [1 Sided] or [2 Sided] for Orig-inal, and then press [Combine 1Side] for Copy.
Referencep.56 “Originals and copy orien-tation”
CCCC Select the number of originals tocombine, and then press [OK].
DDDD Select the paper size.
EEEE Press [OK].
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
2 Sided Combine
Combines various pages of originalsonto a two-sided sheet.
❖❖❖❖ 1 Sided 4 Pages →→→→ Combine 2 SideCopies 4 one-sided originals onto asheet, two pages per side.
❖❖❖❖ 1 Sided 8 Pages →→→→ Combine 2 SideCopies 8 one-sided originals onto asheet, four pages per side.
1. Front
2. Back
GCSHVY9E
GCSHVYAE
0816JupiterC1_GB_Copy_FM.book Page 58 Monday, July 26, 2004 3:12 PM
Copier Functions
59
2
❖❖❖❖ 1 Sided 16 Pages →→→→ Combine 2 SideCopies 16 one-sided originals ontoa sheet, eight pages per side.
1. Front
2. Back
❖❖❖❖ 2 Sided 4 Pages →→→→ Combine 2 SideCopies 2 two-sided originals ontoa sheet, two pages per side.
❖❖❖❖ 2 Sided 8 Pages →→→→ Combine 2 SideCopies 4 two-sided originals ontoa sheet, four pages per side.
❖❖❖❖ 2 Sided 16 Pages →→→→ Combine 2 SideCopies 8 two-sided originals ontoa sheet, eight pages per side.
Note❒ You cannot use the bypass tray
with this function.
ReferenceRelated default settings:p.57 “Orientation of the originaland combine image position”p.118 “Erase Original Shadowin Combine”p.119 “Copy Order in Com-bine”p.120 “Separation Line in Com-bine”
AAAA Press [Dup./Combine/Series].
GCSHVY5E
GCSHVY1E
GCSHVY2E
GCSHVY6E
0816JupiterC1_GB_Copy_FM.book Page 59 Monday, July 26, 2004 3:12 PM
Copying
60
2
BBBB Press [1 Sided] or [2 Sided] for Orig-inal, and then press [Combine 2Side] for Copy.
Referencep.56 “Originals and copy orien-tation”
CCCC Select the number of originals tocombine, and then press [OK].
DDDD Select the paper size.
EEEE Press [OK].
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
Series Copies
This function copies the front andback of a two-sided original separate-ly, or two facing pages of a boundoriginal, onto two sheets.
Limitation❒ You cannot use the Series Copies
function with the ADF.
❖❖❖❖ Book→→→→1 Sided Copies a two-page spread originalonto two separate pages.
❖❖❖❖ Book→→→→2 SidedCopies a two-page spread originalonto a sheet, one page per side.
❖❖❖❖ Front&Back→→→→2 SidedCopies both sides of a two-pagespread original onto both sides of asheet.
Note❒ See the following table for orig-
inal and copy paper sizes whenusing a 100% ratio.
❖❖❖❖ Metric version
Original
Paper for one-sided copy
Paper for two-sided copy
A3L A4K × 2 sheets
A4K × 1 sheet (two-sided)
B4 JISL B5 JISK × 2 sheets
B5 JISK × 1 sheet (two-sided)
A4L A5K × 2 sheets
A5K × 1 sheet (two-sided)
0816JupiterC1_GB_Copy_FM.book Page 60 Monday, July 26, 2004 3:12 PM
Copier Functions
61
2
❖❖❖❖ Inch version
❒ You cannot use the bypass trayw i t h B o o k→ 2 S id e d o rFront&Back→2 Sided.
AAAA Press [Dup./Combine/Series].
BBBB Press [Series/Book].
CCCC Press [Series].
DDDD Select [Book→→→→1 Sided], [Book→→→→2Sided], or [Front&Back→→→→2 Sided],and then press [OK].
EEEE Press [OK].
FFFF Make sure [Auto Paper Select] is se-lected.
GGGG Place the original on the exposureglass, and then press the {{{{Start}}}}key.
Note❒ Press the {{{{#}}}} key after all origi-
nals have been scanned.
Copying Book Originals
Copies two or more originals in pageorder.
❖❖❖❖ 1 Sided→→→→MagazineCopies two or more originals intomagazine page order copies (whenfolded and stacked).
❖❖❖❖ Open to left
❖❖❖❖ Open to right
Original
Paper for one-sided copy
Paper for two-side copy
81/2" × 11"L
51/2" × 81/2"K × 2 sheets
51/2" × 11"K × 1 sheet (two-sided)
GCBOOK3E
GCBOOK4E
0816JupiterC1_GB_Copy_FM.book Page 61 Monday, July 26, 2004 3:12 PM
Copying
62
2
❖❖❖❖ 2 Sided→→→→MagazineCopies two or more two-sidedoriginals into magazine page ordercopies (when folded and stacked).
❖❖❖❖ Open to left
❖❖❖❖ Open to right
How to fold and unfold copies to make a magazine
❖❖❖❖ Open to left
❖❖❖❖ Open to right
Note❒ You cannot use the bypass tray
with this function.❒ The machine sets the reproduction ra-
tio automatically to fit the paper size.
ReferenceRelated default settings:p.118 “Erase Original Shadow inCombine”
AAAA Select [Open to Left] or [Open toRight] with User Tools.
Referencep.120 “Orientation: Magazine”
BBBB Press [Dup./Combine/Series].
CCCC Press [Series/Book].
DDDD Press [Book].
EEEE Select [1 Sided→→→→Magazine], or [2Sided→→→→Magazine], and then press [OK].
FFFF Press [OK].
GGGG Select the paper.
HHHH Place the originals, and then pressthe {{{{Start}}}} key.
Note❒ When placing originals on the
exposure glass or in the ADF us-ing the Batch function, press the{{{{#}}}} key after all the originalshave been scanned.
GCAH030E
GCAH040E
GCBOOK5E
GCBOOK6E
0816JupiterC1_GB_Copy_FM.book Page 62 Monday, July 26, 2004 3:12 PM
Copier Functions
63
2
Image Repeat
The original image is copied repeat-edly.
There are two types of designationmethods for Image Repeat.
❖❖❖❖ Whole Area RepeatRepeatedly copies the entire im-age.
❖❖❖❖ Specified Area RepeatRepeatedly copies a specified por-tion of the image. Decide the basepoint of the area, specify the lengthand the width, and then specify thelocation of the area.
ReferenceRelated Initial SettingsSee p.119 “Image Repeat Sepa-ration Line”
Whole Area Repeat
Note❒ The number of repeated images
depends on the original size, copypaper size, and reproduction ratio.See the following table.
❖❖❖❖ Original: A5KKKK/Copy paper: A4KKKK or Original: A5LLLL/Copy paper A4LLLL
❖❖❖❖ Original: A5KKKK/Copy paper: A4LLLL or Original: A5LLLL/Copy paper A4KKKK
AAAA Select the size of the copy paperand the reproduction ratio.
BBBB Press [Edit/Colour Creation].
CCCC Press [Edit Image].
DDDD Press [Image Repeat].
EEEE Make sure that [Whole Area] is se-lected, then press [OK].
FFFF Press [OK] twice.
GGGG Place the original, and then pressthe {{{{Start}}}} key.
4 repeats (71%) 16 repeats (35%)
2 repeats (100%)
8 repeats (50%)
32 repeats (25%)
Repeat1 Repeat2
Repeat3 Repeat4Repeat5
0816JupiterC1_GB_Copy_FM.book Page 63 Monday, July 26, 2004 3:12 PM
Copying
64
2
Specified Area Repeat
You can use this function only whenyou are making a copy from the Ex-posure Glass.
Note❒ The base point X1, Y1, and the
length set by point X2, Y2 deter-mines the area of an image repeat-edly copied.
Limitation❒ You cannot use the specified area
repeat from ADF.
1. Set on the exposure glass
AAAA Specify the location of the area'sbase point (X1, Y1), and its lengthand width (X2, Y2).
Note❒ You can set any value in the
ra n ge o f X 1 : 0 ~4 12 m m(0”~16.2” ) , X2: 20~432mm(0.8”~17.0”), Y1: 0~277mm(0”~10.8”), and Y2: 20~297mm(0.8”~11.6”).
BBBB Select the size of the copy paperand the reproduction ratio.
CCCC Press [Edit/Colour Creation].
DDDD Press [Edit Image].
EEEE Press [Image Repeat].
FFFF Press [Specified Area].
GGGG Enter the length of [X1] with thenumber keys, then press [#].
HHHH Enter the length of [Y1] with thenumber keys, then press [#].
IIII Enter the length of [X2] with thenumber keys, then press [#].
JJJJ Enter the length of the [Y2] bynumber keys, then press [#].
KKKK Press [OK] three times.
LLLL Place the original on the exposureglass, and then press the {{{{Start}}}}key.
Double Copies
One original image is copied twiceonto one sheet, as shown.
Note❒ You cannot use the bypass tray
with this function.❒ See the following table for original
and copy paper sizes and orienta-tions when using a 100% ratio:
0816JupiterC1_GB_Copy_FM.book Page 64 Monday, July 26, 2004 3:12 PM
Copier Functions
65
2
❖❖❖❖ Metric version
❖❖❖❖ Inch version
❒ Originals with a size of A5KL, B6JISKL, 51/2" × 81/2"L cannot bedetected properly on the exposureglass. Be sure to select the copy pa-per manually or place the originalsin the ADF.
ReferenceRelated default settings:p.119 “Double Copies SeparationLine”
AAAA Press [Edit/Colour Creation].
BBBB Press [Edit Image].
CCCC Press [Double copies].
DDDD Press [OK] twice.
EEEE Select the paper.
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
Centring
You can make copies with the imagemoved to the centre.
Note❒ You cannot use the bypass tray
with this function.❒ Original sizes and orientations for
centring are listed below.
❖❖❖❖ Metric version
❖❖❖❖ Inch version
Original size and orientation
Copy paper size and orientation
A5L A4K
B6 JISL B5 JISK
A4K A3L
A5K A4L
B5 JISK B4 JISL
B6 JISK B5 JISL
Original size and orientation
Copy paper size and orientation
51/2" × 81/2"L 81/2" × 11"K
51/2" × 81/2"K 81/2" × 11"L
81/2" × 11"K 11" × 17"L
Original placed on:
Original size and orienta-tion
Exposure glass
A3L, B4 JISL, A4KL, B5 JISKL
ADF A3L, B4 JISL, A4KL, B5 JISKL, A5KL, B6 JISKL, 11" × 17"L, 81/2" × 11"KL
Original placed on:
Original size and orienta-tion
Exposure glass
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
ADF A3L, A4KL, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"K, 51/2" × 81/2"KL, 10" × 14"L
GCCNTR0E
0816JupiterC1_GB_Copy_FM.book Page 65 Monday, July 26, 2004 3:12 PM
Copying
66
2
AAAA Select the paper.
BBBB Press [Edit/Colour Creation].
CCCC Press [Edit Image].
DDDD Press [Centring].
EEEE Press [OK] twice.
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
Positive/Negative
If your original is black and white,copy images are inverted.
Note❒ If your original is black and white,
copy images are inverted. If youroriginal is colour, the density,darkness and brightness of eachcolour will be reversed and invert-ed to complimentary colours.
❒ If the {{{{Single Colour}}}} key is select-ed, copy images are copied inwhite and specified colours.
❒ If [Two-colour] (normal) is selected,the white part of the original be-comes black and the black part be-comes white, and the coloured partis copied with the specified colour.
❒ If [Red & Black] is selected, thewhite part of the original becomesblack, and the black part becomeswhite, but the red part is copied asred colour.
AAAA Press [Edit/Colour Creation].
BBBB Press [Edit Image].
CCCC Press [Positive/Negative].
DDDD Press [OK] twice.
EEEE Select the paper.
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
Mirror
Copies by reversing the image fromleft to right, as reflected in a mirror.
AAAA Press [Edit/Colour Creation].
BBBB Press [Edit Image].
CCCC Press [Mirror Image].
DDDD Press [OK] twice.
EEEE Place the originals, then press the{{{{Start}}}} key.
GCHATN1E
0816JupiterC1_GB_Copy_FM.book Page 66 Monday, July 26, 2004 3:12 PM
Copier Functions
67
2
Erase
You can erase the centre and/or allfour sides of the original image.This function has three modes:
❖❖❖❖ BorderErases the original's edge marginfrom the copy.
❖❖❖❖ CentreErases the original's centre marginfrom the copy.
❖❖❖❖ Centre/BorderErases both the original's centreand edge margins from the copy.
ReferenceThe erase width is set to 10 mm(0 .4” ) as default . Y ou canchange this setting with UserTools.p.118 “Erase Centre Width”p.118 “Erase Border Width”
Note❒ The relationship between the orig-
inal orientation and erased area isas follows:
1: Erased part2: 2–99 mm (0.1”–3.9”)
GCCENT2E
GCCENT1E
L original K original
GCCENT3E
0816JupiterC1_GB_Copy_FM.book Page 67 Monday, July 26, 2004 3:12 PM
Copying
68
2
Border Erase
AAAA Press [Edit/Colour Creation].
BBBB Press [Erase/Margin Adj.].
CCCC Press [Erase].
DDDD Set the erase border width.
Selecting [Same Width]
A Press [Same Width].
B Set the erase border width us-ing [nnnn] and [oooo].
Note❒ To change the value entered,
press [nnnn] and [oooo] to set thenew value.
C Press [OK].
Selecting [Diff. Width]
A Press [Diff. Width].B Press the key for the border
you want to change, and thenset the erase border width us-ing [nnnn] and [oooo].
C Press [OK].
EEEE Press [OK] twice.
FFFF Place the originals, and then pressthe {{{{Start}}}} key.
Centre erase
AAAA Press [Edit/Colour Creation].
BBBB Press [Erase/Margin Adj.].
CCCC Press [Erase].
DDDD Press [Centre].
EEEE Set the erase centre width using[nnnn] and [oooo], and then press [OK].
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 68 Monday, July 26, 2004 3:12 PM
Copier Functions
69
2
Centre/border erase
AAAA Press [Edit/Colour Creation].
BBBB Press [Erase/Margin Adj.].
CCCC Press [Erase].
DDDD Press [Centre/Border].
EEEE Set the centre and border to beerased.
Selecting [Same Width]
A Press [Same Width].
B Press [Centre], and then set theerase centre width using [nnnn]and [oooo].
C Press [Border], and then set theerase border width using [nnnn]and [oooo].
D Press [OK].
Selecting [Diff. Width]
A Press [Diff. Width].B Press the key for the part you
want to change, and then setthe erase margin width using[nnnn] and [oooo].
C Press [OK].
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
Margin Adjustment
You can make a binding margin.
ReferenceRelated default settings:p.117 “Front Margin: Left/Right”p.117 “Back Margin: Left/Right”p.117 “Front Margin: Top/Bot-tom”p.117 “Back Margin: Top/Bottom”p.118 “1 Sided→2 Sided Auto Mar-gin: TtoT”
0816JupiterC1_GB_Copy_FM.book Page 69 Monday, July 26, 2004 3:12 PM
Copying
70
2
Note❒ You can change the width of the
binding margin as follows:
AAAA Press [Edit/Colour Creation].
BBBB Press [Erase/Margin Adj.].
CCCC Press [Margin Adjustment].
DDDD Set a binding margin for the frontpages. Press [←←←←] and [→→→→] whensetting the left and right margins,and [↓↓↓↓] and [↑↑↑↑] when setting thetop and bottom margins.
Note❒ To change the value entered,
press [←←←←], [→→→→], [↓↓↓↓], [↑↑↑↑] to set it.❒ If you do not need to specify
margins for back side pages,proceed to step F.
EEEE Set a binding margin for backside pages. Press [←←←←] and [→→→→]when setting the left and rightmargins, and [↓↓↓↓] and [↑↑↑↑] when set-ting the top and bottom margins.
Note❒ Margins on the back side of the
page are possible only when [2Sided] or [Combine 2 Side] is se-lected.
FFFF Press [OK] 3 times.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
Preset Stamp
Frequently used messages can bestored in memory and stamped oncopies.
One of the following eight messagescan be stamped on copies with aframe around it:"COPY", "URGENT", "PRIORITY","For Your Info.", "PRELIMINARY","For Internal Use Only", "CONFI-DENTIAL", "DRAFT".
Metric version
0–30 mm (increments of 1 mm)
Inch version
0"–1.2" (increments of 0.1")
GCSTMP1E
0816JupiterC1_GB_Copy_FM.book Page 70 Monday, July 26, 2004 3:12 PM
Copier Functions
71
2
Stamp position and original orientation
Note❒ You cannot use the bypass tray
with this function.❒ Only one message can be stamped
at a time.❒ The default stamp colour is black.
Referencep.121 “Stamp Priority”p.121 “Stamp Language”p.121 “Stamp Position”p.121 “Stamp Format”p.121 “Stamp Colour”
AAAA Press [Edit/Colour Creation].
BBBB Press [Stamp].
CCCC Press [Preset Stamp].
DDDD Select the message.
EEEE Press [All Pages] or [1st Page only] toselect the print page.
Note❒ You can change the colour, po-
sition, size, and density of thestamp. See p.71 “Changing thestamp colour”. See p.71 “Tochange stamp position, size,and density”.
FFFF After you have specified all nec-essary settings, press [OK].
GGGG Press [OK] twice.
HHHH Place the originals, and then pressthe {{{{Start}}}} key.
Changing the stamp colour
AAAA Press [Stamp Colour].
BBBB Select the stamp colour, thenpress [OK].
To change stamp position, size, and density
AAAA Press [Change].
BBBB Select the position for print, size,and density, and then press [OK].
GCSTMP5E
0816JupiterC1_GB_Copy_FM.book Page 71 Monday, July 26, 2004 3:12 PM
Copying
72
2
User Stamp
Prints a registered stamp onto copies.
PreparationYou have to register a user stampbefore using this function. See p.73“To program the user stamp”.
Stamp position and original orientation
Note❒ You cannot use the bypass tray
with this function.❒ Only one message can be stamped
at a time.❒ The default stamp colour is black.
ReferenceRelated default settings:p.122 “Stamp Position 1 - 4”p.122 “Stamp Format 1 - 4”p.122 “Stamp Colour: 1 - 4”
AAAA Press [Edit/Colour Creation].
BBBB Press [Stamp].
CCCC Press [User Stamp].
DDDD Select the stamp number.
EEEE Press [All Pages] or [1st Page only] toselect the print page.
Note❒ You can change the stamp col-
our and posit ion. See p.73“Chang ing t he s tamp co l -our”.See p.73 “To change thestamp position”.
FFFF After all settings are complete,press [OK].
GGGG Press [OK] twice.
HHHH Place the originals, and then pressthe {{{{Start}}}} key.
GCSTMP0E
0816JupiterC1_GB_Copy_FM.book Page 72 Monday, July 26, 2004 3:12 PM
Copier Functions
73
2
Changing the stamp colour
AAAA Press [Stamp Colour].
BBBB Select the stamp colour, thenpress [OK].
To change the stamp position
AAAA Press [Change].
BBBB Select the position, and then press[OK].
To program the user stamp
Note❒ The range of stamp images for
readability is 10–297 mm high(0.4"–11.7") and 10–432 mm wide(0.4"–17.0"). However, if the valueexceeds the maximum area (5,000mm2, 7.75 inch2), it is automaticallyadjusted to range.
❒ Up to four frequently used imagescan be stored in memory.
AAAA Make sure the machine's copierfunction is selected.
BBBB Press the {{{{User Tools/Counter}}}} key.
CCCC Press [Copier/Document Server Fea-tures].
DDDD Press [Stamp].
EEEE Press [User Stamp].
FFFF Press [Program/Delete Stamp].
GGGG Press [Program], and then press thestamp number (1–4) you want toprogram.
Note❒ Stamp numbers displayed with
m next to them already havesettings.
❒ If the stamp number is alreadyin use, the machine will ask youif you want to overwrite it.Press [Yes] or [No].
HHHH Enter the user stamp name usingthe letter keys on the display pan-el. You can register up to 10 char-acters.
IIII Press [OK].
Reference“Entering Text”, General Set-tings Guide
JJJJ Enter the horizontal size of thestamp using the number keys,and then press [#].
0816JupiterC1_GB_Copy_FM.book Page 73 Monday, July 26, 2004 3:12 PM
Copying
74
2
KKKK Press [Vertical], and then enter thevertical size of the stamp usingthe number keys, and then press[#].
LLLL Place the original for user stampon the exposure glass, and thenpress [Start Scanning].
The original is scanned, and thestamp is registered.
Note❒ Originals cannot be scanned
from the ADF when program-ming the user stamp.
MMMM Press [Exit].
NNNN Press [Exit].
The Copier/Document Server Fea-tures main menu is displayed.
OOOO Press [Exit].
Exits settings and gets ready tocopy.
To delete the user stamp
Important❒ You cannot restore a deleted
stamp.
AAAA Make sure the machine's copierfunction is selected.
BBBB Press the {{{{User Tools/Counter}}}} key.
CCCC Press [Copier/Document Server Fea-tures].
DDDD Press [Stamp].
EEEE Press [User Stamp].
FFFF Press [Program/Delete Stamp].
GGGG Press [Delete], and then press thestamp number you want to delete.
HHHH Select [Delete], and then press [Ex-it].
IIII Press [Exit].
The Copier/Document Server Fea-tures main menu is displayed.
JJJJ Press [Exit].Exits settings and gets ready tocopy.
0816JupiterC1_GB_Copy_FM.book Page 74 Monday, July 26, 2004 3:12 PM
Copier Functions
75
2
Date Stamp
You can use this function to printdates onto copies.
You can select from the followingdate formats:• MM/DD/YYYY• MM.DD.YYYY• DD/MM/YYYY• DD.MM.YYYY• YYYY.MM.DD
Stamp position and original orientation
Note❒ You cannot use the bypass tray
with this function.❒ The default stamp colour is black.
ReferenceRelated default settings:p.122 “Format”p.122 “Font”p.122 “Stamp Position”p.123 “Stamp Setting”p.123 “Size”p.123 “Superimpose”p.123 “Stamp Colour”“Timer Settings”, General SettingsGuide
GCSTMP3E
GCSTMP7E
0816JupiterC1_GB_Copy_FM.book Page 75 Monday, July 26, 2004 3:12 PM
Copying
76
2
AAAA Press [Edit/Colour Creation].
BBBB Press [Stamp].
CCCC Press [Date Stamp].
DDDD Press [All Pages] or [1st Page only] toselect the print page.
Note❒ You can change the colour, for-
mat and position of the datestamp. See p.76 “Changing thestamp colour”, p.76 “To changethe date format”.
EEEE After all settings are complete,press [OK].
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
Changing the stamp colour
AAAA Press [Stamp Colour].
BBBB Select the stamp colour, thenpress [OK].
To change the date format
AAAA Press [Change Format].
BBBB Select the date format, and thenpress [OK].
To change the stamp position
AAAA Press [Change].
BBBB Select the date stamp position,and then press [OK].
0816JupiterC1_GB_Copy_FM.book Page 76 Monday, July 26, 2004 3:12 PM
Copier Functions
77
2
Page Numbering
You can use this function to printpage numbers onto copies.
There are six types of Page Number-ing (“n” is the total number of pagesin original):• P1, P2,…Pn• 1/n, 2/n,...n/n• -1-, -2-,...-n-• P.1, P.2,...P.n• 1, 2…n• 1-1, 1-2,..1-n
Stamp position and orientation of originals
Note❒ You cannot use the bypass tray
with this function.❒ The default stamp colour is black.
ReferenceRelated default settings:p.123 “Stamp Format”p.123 “Font”p.123 “Size”p.123 “Duplex Back Page Stamp-ing Position”p.123 “Page Numbering in Com-bine”p.123 “Stamp Position”p.123 “Superimpose”p.123 “Stamp Colour”
CP2G0100
0816JupiterC1_GB_Copy_FM.book Page 77 Monday, July 26, 2004 3:12 PM
Copying
78
2
AAAA Press [Edit/Colour Creation].
BBBB Press [Stamp].
CCCC Press [Page Numbering].
DDDD Select the format.
Note❒ You can specify the Stamp Col-
our , posi t ion , pages to bestamped, and numbering. See“Changing the stamp colour”,“To change the stamp position”,“Specifying the first printingpage and start number”.
EEEE After all settings are complete,press [OK].
FFFF Press [OK] twice.
GGGG Place the originals, and then pressthe {{{{Start}}}} key.
Changing the stamp colour
AAAA Press [Stamp Colour].
BBBB Select the stamp colour, thenpress [OK].
To change the stamp position
AAAA Press [Change].
BBBB Select the position, and then press[OK].
Specifying the first printing page and start number
If you selected (P1, P2…, -1-,-2-…, P.1, P.2…, 1, 2…, )
Note❒ The following explanation uses P1,
P2... as an example. The steps arethe same for other selections.
AAAA Press [Change] on the right side.
0816JupiterC1_GB_Copy_FM.book Page 78 Monday, July 26, 2004 3:12 PM
Copier Functions
79
2
BBBB Press [First Printing Page], then en-ter the original page number fromwhich to start printing using thenumber keys, and then press the{{{{#}}}} key.
Note❒ To change the number entered,
press [Clear] or the {{{{Clear/Stop}}}}key, and then enter a newnumber.
CCCC Press [Numbering from/to], enter thenumber of the page from which tos t ar t n u m b er i n g u s i n g t h enumber keys, and then press the{{{{#}}}} key.
Note❒ The example below shows the
first printing page as “2”and thestart number as “3”.
DDDD Press [Last Number], enter thenumber of the page to stop num-bering using the number keys,and then press the {{{{#}}}} key.
Note❒ If you want to number all pages
to the end, press [to the end].
EEEE When page designation is com-plete, press [OK].
FFFF Press [OK] 3 times.
If you selected (1/5, 2/5…)
AAAA Press [Change] on the right handside of the display.
BBBB Press [First Printing Page], then en-ter the original page number fromwhich to start printing using thenumber keys, and then press the{{{{#}}}} key.
GCANPE2J
0816JupiterC1_GB_Copy_FM.book Page 79 Monday, July 26, 2004 3:12 PM
Copying
80
2
Note❒ You can enter between 1 and
9999 for the original pagenumber from which to startprinting.
❒ To change the number entered,press [Clear] or the {{{{Clear/Stop}}}}key, and then enter a newnumber.
CCCC Press [Numbering from/to], then en-ter the number of page fromwhich to start numbering usingthe number keys, and then pressthe {{{{#}}}} key.
DDDD Press [Last Number], then enter thenumber of page at which to stopnumbering using the numberkeys, and then press the {{{{#}}}} key.
Proceed to step E when not chang-ing.
Note❒ To print on the last page, press
[to the end].❒ The last number is the last page
number printed. For example, if[Total Pages] is ten, if you wantto print seven pages up to page7, enter [7] as the [Last Number].
❒ Normally, you do not need toenter this number.
EEEE Press [Total Pages], enter the totalnumber of original pages usingthe number keys, and then pressthe {{{{#}}}} key.
FFFF When page designation is com-plete, press [OK].
Note❒ To change the settings after
pressing [OK], press [Change],and then enter the numbersagain.
GGGG Press [OK] 3 times.
If you selected (1-1, 1-2,…)
AAAA Press [Change] on the right handside.
BBBB Press [First Printing Page], and thenenter the original page numberfrom which to start printing usingnumber keys, and then press the{{{{#}}}} key.
Note❒ To change the number entered,
press [Clear] or the {{{{Clear/Stop}}}}key, and then enter a newnumber.
CCCC Press [First Chapter No.], enter thechapter number from which tos t a r t n u m b e r in g u s in g t h enumber keys, and then press the{{{{#}}}} key.
Note❒ You can enter between 1 and
9999 for the chapter numberfrom which to start numbering.
DDDD Press [Numbering from/to], and thenenter the page number fromwhich to start numbering usingthe number keys, and then pressthe {{{{#}}}} key.
EEEE When page designation is com-plete, press [OK].
FFFF Press [OK] 3 times.
0816JupiterC1_GB_Copy_FM.book Page 80 Monday, July 26, 2004 3:12 PM
Copier Functions
81
2
Covers
You can use this function to createcover sheets by adding additionalpages of different paper, or copyingexisting pages onto different paper.
PreparationBefore selecting this function, setthe tray for front cover sheets. See“Cover Sheet Tray” in “Tray PaperSettings”, General Settings Guide.
Note❒ The cover sheet should be the same
size and orientation as the copy pa-per.
❒ You cannot use the bypass traywith this function.
❒ When selecting Copy, selectwhether the front and back coversare copied one-sided or two-sided.See “Cover Sheet Tray” in “TrayPaper Settings”, General SettingsGuide.
❖❖❖❖ Front coverThe first page of originals is copiedonto a specified cover sheet paper,or a cover sheet is inserted beforethe first copy page.• Copy
• Blank
❖❖❖❖ Front/Back coversThe first and last page of original iscopied onto a specified cover sheetpaper.• Copy
• Blank
Referencep.118 “Front Cover Copy inCombine”
AAAA Press [Cover/Slip Sheet].
BBBB Press [Front Cover] or [Front/BackCover].
CCCC Select [Copy] or [Blank] for the cov-er sheet.
DDDD Select the paper tray containingthe paper to copy the originals on-to, and then press [OK].
EEEE Place the originals in the ADF,and then press the {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 81 Monday, July 26, 2004 3:12 PM
Copying
82
2
Slip Sheets
Every time the originals' page chang-es, a slip sheet is inserted. This func-tion can be used to automaticallyinsert a slip sheet between OHPtransparencies, or as a stacking func-tion. You can also copy onto slipsheets.
PreparationBefore selecting this function, setthe tray for slip sheets. See “SlipSheet Tray” in “Tray Paper Set-tings”, General Settings Guide.
Note❒ Load slip sheets in the same size
and orientation as copy paper orOHP transparencies.
❖❖❖❖ When using OHP transparencies fromthe bypass tray• Copy
• Blank
Note❒ Press the {{{{#}}}} key and select [OHP
Sheet] in Special paper. See p.24“When copying onto OHP Trans-parencies or Thick Paper”.
❒ Paper will be delivered to the ex-ternal tray when copying ontoOHP transparencies or thick paperfrom the bypass tray, even if youhave specified not to use the exter-nal tray as the output tray.
AAAA Press [Cover/Slip Sheet].
BBBB Press [Slip Sheet].
CCCC Select [Copy] or [Blank], and thenpress [OK].
DDDD Select the paper tray containingthe sheet paper to copy the origi-nals.When using OHP transparencies,open the bypass tray.
EEEE Place the originals, and then pressthe {{{{Start}}}} key.
123
1
2
3
21
21
0816JupiterC1_GB_Copy_FM.book Page 82 Monday, July 26, 2004 3:12 PM
Storing Data in the Document Server
83
2
Storing Data in the Document Server
The Document Server enables you tostore documents in memory and printthem as you want.
Important❒ Machine failure can result in data
loss. Important data stored on thehard disk should be backed up.The manufacturer shall not be re-sponsible for any damage thatmight result from loss of data.
Note❒ Data stored in the Document Serv-
er is deleted after three days by set-ting default. You can specify aperiod after which stored data isautomatically deleted. For moreinformation about settings, see“Auto Delete File” in “Key Opera-tor Tools”, General Settings Guide.
AAAA Press [Store File].
BBBB Enter a user name, file name, orpassword if necessary.
ReferenceFor details about how to regis-ter the user name, file name, orpassword, see “To register orchange a user name”, and “Toset or change a password”, Gen-eral Settings Guide.
CCCC Press [OK].
DDDD Place the originals.
ReferenceFor more information about thetypes of originals that can beplaced and how to place them,see p.13 “Placing Originals”.
EEEE Make the scanning settings forthe originals.
FFFF Press the {{{{Start}}}} key.
Originals are scanned and storedin memory.
Note❒ To stop scanning, press the
{{{{Clear/Stop}}}} key. To resume apaused scanning job, press [Con-tinue] in the confirmation dis-play. To delete saved imagesand cancel the job, press [Stop].
❒ When placing an original on theexposure glass, press the {{{{#}}}}key after all the originals havebeen scanned.
0816JupiterC1_GB_Copy_FM.book Page 83 Monday, July 26, 2004 3:12 PM
Copying
84
2
❒ To check that the document hasbeen stored, press the {{{{Docu-ment Server}}}} key to display thedocument selection screen.
❒ When the machine is printing adocument stored using the cop-ier function, wait until printinghas finished before you storeanother copy document.
❒ To print stored documents, see“Printing Stored Documents”,General Settings Guide.
0816JupiterC1_GB_Copy_FM.book Page 84 Monday, July 26, 2004 3:12 PM
Programs
85
2
Programs
You can store frequently used copyjob settings in machine memory andrecall them for future use.
Note❒ You can store up to 10 programs.❒ You can select the standard mode
or Program No.10 as the defaultmode to be set when modes arecleared or reset, or immediately af-ter the operation switch is turnedon. See p.113 “Change InitialMode”.
❒ Paper settings are stored based onpaper size. However, if you havemore than one paper tray contain-ing same size paper, the tray prior-itized with User Tools (SystemSettings) is selected first. See “Pa-per Tray Priority” in “Tray PaperSettings”, General Settings Guide.
❒ Programs are not deleted by turn-ing the power off or pressing the{{{{Clear Modes}}}} key. They are can-celed only when you delete oroverwrite them with another pro-gram.
Storing a Program
AAAA Edit the copy settings so all func-tions you want to store in this pro-gram are selected.
BBBB Press the {{{{Program}}}} key.
CCCC Press [Register].
DDDD Press the program number youwant to store.
Note❒ Program numbers displayed
with m next to them alreadyhave settings.
Referencep.86 “Changing a stored pro-gram”
EEEE Enter the program name using theletter keys on the display panel.
You can enter up to 40 characters.
ReferenceFor details about entering char-acters, see “Entering Text”, Gen-eral Settings Guide.
Note❒ If you do not want to enter a
program name, proceed to stepF.
ZLFH180E
0816JupiterC1_GB_Copy_FM.book Page 85 Monday, July 26, 2004 3:12 PM
Copying
86
2
FFFF Press [OK].
When the settings are successfullystored, the program name is dis-played on the right side of the reg-istered program number. Thedisplay returns to the initial copydisplay for a while.
Changing a stored program
AAAA Check the program settings.
Note❒ To check the contents of a pro-
gram, recall it. See p.86 “Recall-ing a Program”.
BBBB Repeat steps AAAA to DDDD of “Storing aProgram”.
CCCC Press [Register].
Repeat steps E and F of ”Storing aProgram”.
Note❒ When overwritten, the previous
program is deleted.
Deleting a Program
AAAA Press the {{{{Program}}}} key.
BBBB Press [Delete].
CCCC Press the number of the programyou want to delete.
DDDD Press [Yes].
The program is deleted, and thedisplay returns to the initial copydisplay.
Recalling a Program
AAAA Press the {{{{Program}}}} key.
BBBB Press [Recall].
CCCC Press the number of the programyou want to recall.
The stored settings are displayed.
Note❒ Program numbers displayed
with m next to them alreadyhave settings.
DDDD Place the originals, and then pressthe {{{{Start}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 86 Monday, July 26, 2004 3:12 PM
87
3. Colour Adjustment/Program
Colour Adjustment
This function lets you alter up to threesingle colours by mixing them withadjacent colours in the colour circle.
ReferenceFor types and examples of imageadjustment functions, see p.iii“What You Can Do with This Ma-chine <Colour Functions/ColourAdjustments>”.
Note❒ You can adjust up to 3 colours
from yellow, red, magenta, blue,cyan, or green at the same time.
❒ This function is only available inFull Colour mode.
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Press [Adjust Colour].The colour circle is displayed.
CCCC Select the colours you want to ad-just.
You can select up to 3 colours.
DDDD Adjust the colour using [←←←←] or[→→→→].
Note❒ Refer to the colour circle on the
control panel.
EEEE Press [OK].
Note❒ The indicator of the {{{{Adjust/Pro-
gram Colour}}}} key will light upwhen adjusting the colour.
❒ The adjusted settings will be de-leted and the initial values willbe reset, when Auto Clear hasbeen performed, when the{{{{Clear Modes}}}} key has beenpressed or when the power hasbeen turned off.
0816JupiterC1_GB_Copy_FM.book Page 87 Monday, July 26, 2004 3:12 PM
Colour Adjustment/ Program
88
3
Colour Balance
You can adjust the overall colour tonewhen the overall copy is reddish orbluish.
ReferenceFor types and examples of the im-age adjustment functions, see p.iii“What You Can Do with This Ma-chine <Colour Functions/ColourAdjustments>”.
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Make sure that [Colour Balance] isselected.
CCCC Adjust by pressing [Lighter] or[Darker].
Note❒ You can also register the adjust-
ed settings. See p.88 “ColourBalance Program”.
DDDD Press [OK].
Note❒ The indicator of the {{{{Adjust/Pro-
gram Colour}}}} key will light upwhen adjusting the colour bal-ance.
❒ The adjusted settings will be de-leted and the initial values willbe reset when either Auto Clearhas been performed, when the{{{{Clear Modes}}}} key has beenpressed or when the power hasbeen turned off.
Colour Balance Program
You can also store the colour balancesetting in memory and recall it whenyou want to use it.
Note❒ You can store up to 3 programs.❒ To change the registered settings,
register them again. Previouslyregistered settings will be over-written.
Storing the adjusted colour balance
AAAA Press the {{{{Adjust/Program Colour}}}}Key.
ReferenceSee p.88 “Colour Balance”.
BBBB Press [Program Colour Balance].
CCCC Press [Program].
DDDD Select a number (1–3) for this set-ting.
The colour balance setting will beregistered in the selected number.
Note❒ If you select the program
number key where the m is dis-played, the previously regis-t e r e d s e t t i n g s w i l l b eoverwritten. See p.89 “Chang-ing the registered settings”.
EEEE Press [OK].
0816JupiterC1_GB_Copy_FM.book Page 88 Monday, July 26, 2004 3:12 PM
Colour Balance
89
3
Changing the registered settings
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Make sure that [Colour Balance] isselected, and then press [ProgramColour Balance].
CCCC Select the program number (1–3)whose sett ings you want tochange.
The registered colour balance isdisplayed.
DDDD Change the registered settings.
EEEE After the registered settings arechanged, press [Program Colour Bal-ance].
FFFF Press [Program], and then selectthe program number to be over-written.
GGGG Press [Register].
The settings are changed.
HHHH Press [OK].
Copying with the registered settings
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Make sure that [Colour Balance] isselected, and then press [ProgramColour Balance].
CCCC Make sure that [Recall] has beenselected, and then select the pro-gram that you want to use.
DDDD Press [OK].
EEEE Place the originals, and then pressthe {{{{Start}}}} key.
Note❒ The adjusted settings will be de-
leted and the initial values willbe reset when either Auto Clearhas been performed, when the{{{{Clear Modes}}}} key has beenpressed or when the power hasbeen turned off.
Deleting the registered settings
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Make sure that [Colour Balance] hasbeen selected, and then press [Pro-gram Colour Balance].
CCCC Press [Delete], and then select theprogram that you want to delete.
DDDD Press [Yes].
EEEE Press [OK].
0816JupiterC1_GB_Copy_FM.book Page 89 Monday, July 26, 2004 3:12 PM
Colour Adjustment/ Program
90
3
Image Adjustment
ReferenceFor types and examples of the im-age adjustment functions, see p.iii“What You Can Do with This Ma-chine <Colour Functions/ColourAdjustments>”.
You can make the following types ofimage adjustments.
❖❖❖❖ Sharp / SoftAdjusts the outline of an image.
❖❖❖❖ ContrastAdjusts the shades of an image.
❖❖❖❖ Background DensityAdjusts the background density ofan image.
❖❖❖❖ Adjust U.C.R.Adjusts the amount of black tonerused in order to vividly express theblack areas in an image.
❖❖❖❖ Text/Photo SensitivityAdjusts the standard level in judg-ing the image in the text and thep h o t o p ar t , w h e n u s i ng“Text/Photo”.
Note❒ “Sharp / Soft”, “Contrast”,
“Background Density” can eachbe adjusted. However, their ad-justments can affect the level ofother adjustment functions.
❒ When adjusting the image qual-ity, the indicator of the {{{{Ad-just/Program Colour}}}} key willlight up.
❒ The adjusted settings will be de-leted and the initial values willbe reset when either Auto Clearhas been performed, when the{{{{Clear Modes}}}} key has beenpressed or when the power hasbeen turned off.
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Press [Copy Quality].
CCCC Adjust the settings.
Adjusting the sharpness/softness
A Adjust by pressing [Soft] or[Sharp].
B Press [OK].
Adjusting the contrast
A Adjust by pressing [Low] or[High].
B Press [OK].
0816JupiterC1_GB_Copy_FM.book Page 90 Monday, July 26, 2004 3:12 PM
Image Adjustment
91
3
Adjusting the background density
A Adjust by pressing [Lighter] or[Darker].
Note❒ Adjust to a lighter density
when copying dark texturedoriginals, such as newspaperor recycled paper.
❒ Adjust to a darker densitywhen darkening the colourof markers or highlighters.However, highlighter pencolours are difficult to repro-duce. Depending on the col-our used, they may not comeout on copies, or may comeout as a different colour.
B Press [OK].
Adjusting the U.C.R.
A Adjust by pressing [Lighter] or[Darker].
B Press [OK].
Adjusting the text/photo sensitivity
A Press [TTTTNext].
B Adjust by pressing [Text] or[Photo].
Note❒ Adjust toward “Text” if parts
of the texts are faded or arenot clear. Adjust toward“Photo” if the outline of pho-tos becomes dark.
C Press [OK].
0816JupiterC1_GB_Copy_FM.book Page 91 Monday, July 26, 2004 3:12 PM
Colour Adjustment/ Program
92
3
User Colour
You can register colours created byadjusting the density of yellow, ma-genta, cyan, and black. You can alsoname the colours that you register,and print out registered colours.
ReferenceFor types and examples of the im-age adjustment functions, see p.iii“What You Can Do with This Ma-chine <Colour Functions/ColourAdjustments>”.The following show you how tocreate colours:
• Adjust the density of each colourusing the density of a chosen basiccolour.
• Directly specify the density of eachcolour using the number keys.
Note❒ Adjust the colours to be registered
such that the total density of yel-low, magenta, cyan, and black isunder 255%.
❒ When the total density of a regis-tered colour is over 256%, it will becorrected to 255%.
❒ When copying with user colours,the finer shades may vary depend-ing on the condition of the ma-chine.
❒ In order to correctly reproduceoriginals, the values entered arecorrected by the machine, and cop-ies are made using the optimumvalues. Therefore, there may beslight colour differences whencopying using “Text” and whenusing “Photo”.
❒ Up to 15 colours can be registered.❒ Sample prints of user colours can
also be made on an A4K, 81/2" ×11"K size page or on an A3L, 11"× 17"L size page.
❒ Printing out a user colour samplewill be counted under the full col-our counter.
Adjusting Colours Based on the Selected Colour
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Press [User Colour].
CCCC Select the number (1–15) youwant to store the user colour in.
Note❒ The settings of the user colour
will change when selecting thenumber already displayed bythe colour name.
0816JupiterC1_GB_Copy_FM.book Page 92 Monday, July 26, 2004 3:12 PM
User Colour
93
3
DDDD Select the colour to be used as abase from [Basic Colour].The density of each colour for theselected colour is displayed.
Note❒ Press [Custom Setting] to directly
specify the density of each col-our with the number keys. Seep.94 “Mixing Colours Manuallywith the Number Keys”
Selecting from user colours
A Press [User Colour].
B Select from the registered col-ours.
EEEE Specify the colour density.
Using [nnnn] [oooo]
A Specify the density in percent-ages (%) using [nnnn] or [oooo].
Using [With Number keys]
A Press [With Number keys].B Select the colour that you want
to adjust.
C Enter the density in percentag-es (%) using the number keys,and then press [#].
Note❒ If you want to use [nnnn] or
[oooo], press [With nnnn oooo].❒ If you enter the wrong densi-
ty, press [Clear] or the{{{{Clear/Stop}}}} key, and then re-enter the correct density.
❒ Repeat steps B and C tospecify the density of multi-ple colours.
When renaming a colour
A Press [Change Name].
B Enter the name of the colour(up to 16 characters), and thenpress [OK].
Reference“Entering Text” General Set-tings Guide.
FFFF Check the density and the nameof the colour, and then press [OK].
GGGG Press [Exit].
0816JupiterC1_GB_Copy_FM.book Page 93 Monday, July 26, 2004 3:12 PM
Colour Adjustment/ Program
94
3
Mixing Colours Manually with the Number Keys
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Press [User Colour].
CCCC Select the number (1–15) that youwant to store the user colour in.
Note❒ The settings of the user colour
will change when selecting thenumber already displayed bythe colour name.
DDDD Press [Custom Setting].
EEEE Select the colour that you want toadjust.
FFFF Enter the density in percentages(%) with the number keys, andthen press [#].
When renaming a colour
A Press [Change Name].B Enter the name of the colour
(up to 16 characters can beused), and then press [OK].
Reference “Entering Text” General Set-tings Guide.
GGGG Check the names of each colour,and then press [OK].
Note❒ Repeat steps E to G if you want
to specify the density of multi-ple colours.
HHHH Press [Exit].
Deleting User Colours
Note❒ You cannot delete colours regis-
tered in the program or registeredcolours currently in use.
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Press [User Colour].
CCCC Press [Delete].
DDDD Select the number of the user col-our you want to delete.
EEEE Press [Delete].
FFFF Press [Exit].
Sampling the User Colours
AAAA Press the {{{{Adjust/Program Colour}}}}key.
BBBB Press [User Colour].
CCCC Make sure that the paper is of thecorrect size, and then press [PrintSample of User Colour].
The sample of user colours is out-put to the standard tray.
Note❒ The user colours will be copied
on a A4K, 81/2" × 11"K sheet ora A3L, 11" × 17"L sheet.
0816JupiterC1_GB_Copy_FM.book Page 94 Monday, July 26, 2004 3:12 PM
95
4. Troubleshooting
If Your Machine Does Not Operate As You Want
When a Message Is Displayed
The following chart contains explanations of common messages. If other mes-sages are displayed, then follow the instructions as displayed.
Note❒ For messages not listed here, see “Troubleshooting” General Settings Guide.
Message Causes Solutions
Cannot detect original size.
An irregular original is placed. See p.12 “Sizes dif-ficult to detect”.
Place custom size originals on the exposure glass. See p.14 “Placing Originals on the Exposure Glass”.
Enter the horizontal and vertical size of the custom size original. See p.14 “Placing Originals on the Expo-sure Glass”.
Select paper manually, not with the Auto Paper Select function.
Do not use the Auto Reduce/En-large function.
Original is not placed. Place originals.
Check original orientation.
There is no copy paper in the same orientation as the originals.
Place the original in the same orien-tation as the copy paper.
Check paper size. An irregular paper size is set.
Press the {{{{Start}}}} key and copying will start on the selected paper.
Rotate Sort is not available with this image size.
A paper size for which Ro-tate Sort is not available is selected.
Select a proper paper size. See p.130 “Sort, Rotate Sort, Stack”.
Cannot punch paper of this size.
The Punch function cannot be used with paper size se-lected.
The following paper sizes are avail-able for Punch mode: A3L, B4 JISL, A4KL, B5 JISKL, A5K, 11"×17"L, 81/2"×14" L, 81/2"×11" KL. Select one of these sizes.
It is over sta-pling capacity.
The number of sheets per set is over the staple capac-ity.
Check the stapler capacity. See p.132 “Staple”.
0816JupiterC1_GB_Copy_FM.book Page 95 Monday, July 26, 2004 3:12 PM
Troubleshooting
96
4
Cannot staple pa-per of this size.
The Staple function cannot be used with the paper size selected.
Select a paper size that can be used with the Staple function. See p.132 “Staple”.
Duplex is not available with this paper size.
A paper size not available when using the Duplex function has been selected.
Select a proper paper size. See p.135 “Duplex”.
Maximum number of sets is*.
The number of copies ex-ceeds maximum copy quantity.
You can change the maximum copy quantity. See p.113 “Max. Copy Quantity”.
Cannot copy. Orig-inal is being scanned by another function.
The Document Server func-tion is in use.
To cancel a job being processed, press [Exit], and then press the {{{{Doc-ument Server}}}} key. Next, press the {{{{Clear/Stop}}}} key. When the message ”[Stop] key was pressed. Stop storing?” is displayed, press [Stop].
Message Causes Solutions
0816JupiterC1_GB_Copy_FM.book Page 96 Monday, July 26, 2004 3:12 PM
If You Cannot Make Clear Copies
97
4
If You Cannot Make Clear Copies
Problem Causes Solutions
Copies appear dirty. The image density is too dark.
Adjust the image density. See p.33 “Adjusting Copy Image Density”.
Auto Image Density is not selected.
Select Auto Image Density. See p.33 “Adjusting Copy Image Density”.
The reverse side of an orig-inal image is copied.
The image density is too dark.
Adjust the image density. See p.33 “Adjusting Copy Image Density”.
Auto Image Density is not selected.
Select Auto Image Density. See p.33 “Adjusting Copy Image Density”.
A shadow appears on cop-ies if you use pasted origi-nals.
The image density is too dark.
Adjust the image density. See p.33 “Adjusting Copy Image Density”.
Change the orientation of the origi-nal.
Put tape over pasted parts.
The same copy area is dirty whenever making copies.
The exposure glass or ADF is dirty.
Clean them. See “Maintaining Your Machine” General Settings Guide.
Copies are too light. The image density is too light.
Adjust the image density. See p.33 “Adjusting Copy Image Density”.
The paper size is not suita-ble.
Use a recommended paper size.
Note❒ A light copy may result when
you use damp or rough grain pa-per.
The toner cartridge is al-most empty.
Add toner. See “Adding Toner” General Settings Guide.
Parts of the image are not copied.
The original is not set cor-rectly.
Place originals correctly. See p.13 “Placing Originals”.
An irregular paper size is selected.
Select a proper paper size.
Copies are blank. The original is not placed correctly.
When using the exposure glass, place originals face down. When us-ing the ADF, place them face up. See p.13 “Placing Originals”.
A moiré pattern is pro-duced on copies.
Original has a dot pattern image, or too many lines.
Position the original on the expo-sure glass at a slight angle.
�������������
yyyyyyyyyyyyy
R
0816JupiterC1_GB_Copy_FM.book Page 97 Monday, July 26, 2004 3:12 PM
Troubleshooting
98
4
If You Cannot Make Copies As You Want
This section explains causes of, and remedies for, unexpected copy results.
❖❖❖❖ Basic
Problem Causes Solutions
Copies are not stapled. There are jammed staples in the stapler.
Remove jammed staples. See “Re-moving Jammed Staples”General Settings Guide.
Note❒ After removing jammed staples,
staples might not eject the first few times you try to use the sta-pler.
The number of copies ex-ceeds stapler capacity.
Check the stapler capacity. See p.132 “Staple”.
Copy paper is curled. Turn the copy paper over in the tray.
Staples are wrongly posi-tioned.
Originals are not placed correctly.
Check originals are placed in the correct position. See p.47 “Staple”.
You cannot combine sever-al functions.
Selected functions cannot be used together.
Check the combination of functions and make the settings again.
See p.127 “Combination Chart”.
When sorting, the pages are divided into two blocks.
The memory became full in the middle of sorting and the pages were delivered in two blocks.
You can interrupt copying when memory becomes full. See p.124 “Memory Full Auto Scan Restart”.
Paper does not output dur-ing printing with stapling.
If you stop printing while using the staple function, sheets not stapled during printing may be left in the staple unit.
Press the {{{{Clear Modes}}}} key and can-cel copy settings, including stapling.
Colours changed even though they were not se-lected.
If colour range is set to “Wider” and if red is select-ed, colours such as magen-ta and orange may change.
Adjust the colour range by setting the colour width. See p.125 “Adjust Colour Image”.
Colours not selected will be erased when using Erase mode.
If colour range is set to “Wider” and if red is select-ed, colours such as magen-ta and orange may change.
Adjust the colour range by setting the colour width. See p.125 “Adjust Colour Image”.
0816JupiterC1_GB_Copy_FM.book Page 98 Monday, July 26, 2004 3:12 PM
If You Cannot Make Copies As You Want
99
4
❖❖❖❖ Edit
❖❖❖❖ Stamp
Problem Causes Solutions
When using the Double Copies function, parts of the original image are not copied.
The original and copy pa-per combination is not cor-rect.
Select A3L for A4 K originals and A4 for A5 originals. See p.64 “Dou-ble Copies”.
When using the Border, Centre, or Centre/Border function, parts of the origi-nal image are not copied.
You set a wide erased mar-gin.
Make the margin width narrower. You can adjust it between 2-99 mm. See “Erase Border Width” and “Erase Centre Width” in p.117 “Edit1/2”.
Place originals correctly.
Originals are not scanned correctly.
Place originals correctly.
When using the Margin Adjustment function, parts of the original image are not copied.
You set a wide erased mar-gin.
Set a narrower margin with User Tools. You can set the width be-tween 0–30 mm (0"–1.2"). See p.117 “Front Margin: Left/Right”, p.117 “Front Margin: Top/Bottom”, p.117 “Back Margin: Left/Right”, and p.117 “Back Margin: Top/Bottom”.
There is a lack of margin space on the opposite side of the binding position.
When using the Image Re-peat function, the original image is not copied repeat-edly.
You selected copy paper of the same size as the origi-nals, or you did not select a proper reproduction ratio.
Select copy paper of a larger size than the originals.
Select a proper reproduction ratio.
Problem Causes Solutions
The stamp position is wrong.
The paper orientation is wrong.
Check the paper orientation and stamp position.
0816JupiterC1_GB_Copy_FM.book Page 99 Monday, July 26, 2004 3:12 PM
Troubleshooting
100
4
❖❖❖❖ Combine
❖❖❖❖ Duplex
Problem Causes Solutions
You cannot fold copies into a book using the Magazine function.
Combine Original Maga-zine Format is not set cor-rectly.
Change the setting.
See p.120 “Orientation: Magazine”
When using the Combine function, parts of the image are not copied.
You specified a reproduc-tion ratio that does not match the sizes of originals and copy paper.
When you specify a reproduction ratio using the Manual Paper Select function, make sure the ratio match-es originals and the copy paper.
Note❒ Select the correct reproduction
ratio before using the Combine function.
Copies are not in correct or-der.
You placed the originals in incorrect order.
When placing a stack of originals in the ADF, the last page should be on the bottom.
If you place an original on the expo-sure glass, start with the first page to be copied.
Problem Causes Solutions
When using Duplex, copy is made Top/Bottom even though Left/Right is se-lected.
You placed the originals in the wrong orientation.
Place the originals in the correct ori-entation. See p.13 “Original Orienta-tion”.
Copies are not in correct or-der.
You placed the originals in incorrect order.
When placing a stack of originals in the ADF, the first page should be on top.
If you place an original on the expo-sure glass, start with the first page to be copied.
0816JupiterC1_GB_Copy_FM.book Page 100 Monday, July 26, 2004 3:12 PM
If You Cannot Make Copies As You Want
101
4
When Memory Is Full
Note❒ If you set [Memory Full Auto Scan Restart] in User Tools (see p.124 “Memory Full
Auto Scan Restart” ) to [Yes], even if memory becomes full, the memory over-flow message will not be displayed. The machine will make copies of scannedoriginals first, then automatically scan and copy remaining originals. Whenthis happens, the resulting sorted pages will not be sequential.
Message Causes Solutions
Memory is full.* originals have been scanned.
Press [Print] to copy scanned origi-nals. Do not remove remaining originals.
Note❒ Copying will stop and this
message will be displayed when the memory is full.
The scanned original exceeds the number of pages that can be stored in memory.
Press [Print] to print out al-ready scanned originals and then delete scan data.
Or, press [Clear] to simply de-lete scan data.
Press [Resume] to scan and copy re-maining originals.
[Stop] [Resume]
The machine checks if the re-maining originals should be copied, after the scanned orig-inal is printed.
To continue copying, remove all copies, and then press [Resume]. To stop copying, press [Stop].
0816JupiterC1_GB_Copy_FM.book Page 101 Monday, July 26, 2004 3:12 PM
Troubleshooting
102
4
0816JupiterC1_GB_Copy_FM.book Page 102 Monday, July 26, 2004 3:12 PM
103
5. User Tools (Copier/DocumentServer Features)
User Tools Menu (Copier/Document Server Features)
User Tools Item Names Default Settings
General Features 1/5 See p.112 “General Features 1/5”.
Auto Paper Select Priority ON
Paper Display Display
Original Type Display Display
Original Type Priority Full Colour/Two-colour: Text/Photo
B & W/Single Colour: Text/Photo
Original Photo Type Priority •Text/Photo: Printed Photo
•Photo: Printed Photo
Auto Tray Switching With image rotation
General Features 2/5 See p.113 “General Features 2/5”.
Duplex Mode Priority 1 Sided→1 Sided (metric)
1 Sided→2 Sided (inch)
Copy Orientation in Duplex Mode Top to Top
Original Orientation in Duplex Mode Top to Top
Change Initial Mode Standard
Max. Copy Quantity 999 Sheets
Tone: Original remains ON
Job End Call ON
General Features 3/5 See p.114 “General Features 3/5”.
Copy Function Key: F1~F5 • F1: 1 Sided→2 Sided: T to T
• F2: 2 Sided: T to T→2 Sided: T to T
• F3: 1 Sided→1 Sided Com-bine
• F4: 1 Sided→1 Sided Com-bine: 4 originals
• F5: Create Margin
0816JupiterC1_GB_Copy_FM.book Page 103 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
104
5
General Features 4/5 See p.115 “General Features 4/5”.
Document Server Storage Key:F1~F5 • F1: 2 Sided Original Top to top
• F2: 1 Sided→1 Sided Com-bine
• F3: 1 Sided→1 Sided Com-bine: 4 originals
• F4: 1 Sided→1 Sided Com-bine: 8 originals
• F5: Create Margin
General Features 5/5 See p.115 “General Features 5/5”.
Clear Bypass Mode Clear
Colour Mode Priority Black & White
Two-colour Mode Priority Red & Black
Auto Image Density Priority Full Colour / Two-colour: OFF
B & W / Single Colour: ON
Reproduction Ratio 1/2 See p.116 “Reproduction Ratio 1/2”.
Shortcut R/E Metric version
•Shortcut R/E 1: 71%
•Shortcut R/E 2: 141%
•Shortcut R/E 3: 93%
Inch version
•Shortcut R/E 1: 73%
•Shortcut R/E 2: 155%
•Shortcut R/E 3: 93%
Enlarge 1~5 Metric version
•Enlarge 1: 115%
•Enlarge 2: 122%
•Enlarge 3: 141%
•Enlarge 4: 200%
•Enlarge 5: 400%
Inch version
•Enlarge 1: 121%
•Enlarge 2: 129%
•Enlarge 3: 155%
•Enlarge 4: 200%
•Enlarge 5: 400%
Priority Setting: Enlarge Metric version 141%
Inch version 155%
User Tools Item Names Default Settings
0816JupiterC1_GB_Copy_FM.book Page 104 Monday, July 26, 2004 3:12 PM
User Tools Menu (Copier/Document Server Features)
105
5
Reproduction Ratio 2/2 See p.116 “Reproduction Ratio 2/2”.
Reduce1~6 Metric version
•Reduce1: 25%
•Reduce2: 50%
•Reduce3: 65%
•Reduce4: 71%
•Reduce5: 75%
•Reduce6: 82%
Inch version
•Reduce1: 25%
•Reduce2: 50%
•Reduce3: 65%
•Reduce4: 73%
•Reduce5: 78%
•Reduce6: 85%
Priority Setting: Reduce Metric version: 71%
Inch version: 73%
Ratio for Create Margin 93%
R/E Priority Reduce
Edit 1/2 See p.117 “Edit1/2”.
Front Margin: Left/Right Metric version: Left 5mm Inch version: Left 0.2”
Back Margin: Left/Right Metric version: Right 5mm Inch version: Right 0.2”
Front Margin: Top/Bottom Metric version:T/B 0mm Inch version:T/B 0”
Back Margin: Top/Bottom Metric version:T/B 0mm Inch version:T/B 0”
1 Sided→2 Sided Auto Margin: TtoT Metric version:Right 5mm Inch version:Right 0.2”
1 Sided→2 Sided Auto Margin: TtoB Metric version:T/B 0mm Inch version:T/B 0”
Erase Border Width Metric version: 10mm Inch version: 0.4”
Erase Original Shadow in Combine Yes
Erase Centre Width Metric version: 10mm
Inch version: 0.4”
User Tools Item Names Default Settings
0816JupiterC1_GB_Copy_FM.book Page 105 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
106
5
Edit 2/2 See p.118 “Edit 2/2”.
Front Cover Copy in Combine Combine
Copy Order in Combine From left to right
Image Repeat Separation Line None
Double Copies Separation Line None
Separation Line in Combine None
Orientation: Magazine Open to left
Stamp See p.121 “Stamp”.
Preset Stamp Stamp Priority Copy
Stamp Language English
Stamp Position Metric version
• Position: Top right
• Top Margin: 24mm
• Right Margin: 24mm
Inch version
• Position: Top right
• Top Margin: 1.0"
• Right Margin: 1.0"
Stamp Format: Size: 1 X
Density: Normal
Page to Stamp: All pages
Stamp Colour: Black
User Stamp Program/Delete Stamp
Stamp Position: 1~4 Metric version
• Position: Top right
• Top Margin: 24mm
• Right Margin: 24mm
Inch version
• Position: Top right
• Top Margin: 1.0"
• Right Margin: 1.0"
Stamp Format: 1~4 All pages
Stamp Colour: 1~4 Black
User Tools Item Names Default Settings
0816JupiterC1_GB_Copy_FM.book Page 106 Monday, July 26, 2004 3:12 PM
User Tools Menu (Copier/Document Server Features)
107
5
Date Stamp Format Metric version:
DD/MM/YYYY
Inch version:
MM/DD/YYYY
Font Font 1
Stamp Position Metric version
• Position: Top left
• Top Margin: 8mm
• Right Margin: 32mm
Inch version
• Position: Top left
• Top Margin: 0.3"
• Right Margin: 0.8"
Stamp Setting All pages
Size Auto
Superimpose No
Stamp Colour Black
User Tools Item Names Default Settings
0816JupiterC1_GB_Copy_FM.book Page 107 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
108
5
Page Numbering Stamp Format P1, P2...
Font Font 1
Size Auto
Duplex Back Page Stamping Position
Opposite position
Page Numbering in Combine Per original
Stamp Position: Metric version
• PositionP1, 1/5, P.1, 1: Top right-1-, 1-1: Bottom centre
• Top/Bottom MarginP1, 1/5, P.1, 1: 12mm-1-, 1-1: 8mm
• Left/Right MarginP1, 1/5, P.1, 1: 12mm-1-, 1-1: 0mm
Inch version
• PositionP1, 1/5, P.1, 1: Top right-1-, 1-1: Bottom centre
• Top/Bottom MarginP1, 1/5, P.1, 1: 0.5"-1-, 1-1: 0.3"
• Left/Right MarginP1, 1/5, P.1, 1: 0.5"-1-, 1-1: 0.0"
Superimpose No
Stamp Colour Black
Input/Output See p.124 “Input/Output”.
Switch to Batch Batch
SADF Auto Reset 5 seconds
Rotate Sort: Auto Paper Continue No
Auto Sort No
Memory Full Auto Scan Restart No
Select Stack Function Stack
Select Stapling Position Top 2
Letterhead Setting No
User Tools Item Names Default Settings
0816JupiterC1_GB_Copy_FM.book Page 108 Monday, July 26, 2004 3:12 PM
User Tools Menu (Copier/Document Server Features)
109
5
Adjust Colour Image See p.125 “Adjust Colour Image”.
Background Density of ADS(Full Colour / Two-colour) Centre of the 5 level adjust-ment
Colour Sensitivity Centre of the 5 level adjust-ment
A.C.S. Sensitivity Centre of the 5 level adjust-ment
A.C.S. Priority Full Colour
User Tools Item Names Default Settings
0816JupiterC1_GB_Copy_FM.book Page 109 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
110
5
Accessing User Tools (Copier/Document Server Features)
This section is for key operators incharge of this machine. With UserTools can change the machine's de-fault settings.
Note❒ Be sure to exit User Tools and re-
turn to the initial copy display af-ter all settings are finished. Thissection describes system settingsyou can set for the copier function.
❒ The selected key is highlighted.❒ Any changes you make with User
Tools remain in effect even if themain power switch or operationswitch is turned off, or the {{{{ClearModes}}}} key is pressed.
ReferenceFor details, see “Changing DefaultSettings” in “User Tools (SystemSettings)”, General Settings Guide.
Changing Default Settings
AAAA Press the {{{{User Tools/Counter}}}} key.
The User Tools main menu ap-pears.
Note❒ When the key operator code is
set, the key operator code inputdisplay appears when changingthe default settings. Enter theregistered key operator code be-forehand. For key operatorcodes, see “Key OperatorTools”, General Settings Guide.
BBBB Press [Copier/Document Server Fea-tures].
The Copier/Document Server Fea-tures menu is displayed.
CCCC Select the menu you want to set.
The setting display for each menuis displayed.
ReferenceSee p.103 “User Tools Menu(Copier/Document Server Fea-tures)”.
DDDD Change settings by following theinstructions on the display panel,and then press [OK].
0816JupiterC1_GB_Copy_FM.book Page 110 Monday, July 26, 2004 3:12 PM
Accessing User Tools (Copier/Document Server Features)
111
5
Exiting User Tools
AAAA After changing default settings,press [Exit] on the User Tools mainmenu.
Changes to User Tools are com-plete, and the machine is ready tocopy.
Note❒ You can also exit User Tools by
pressing the {{{{User Tools/Coun-ter}}}} key.
0816JupiterC1_GB_Copy_FM.book Page 111 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
112
5
Settings You Can Change with User Tools
General Features 1/5
❖❖❖❖ Auto Paper Select Priority Auto Paper Select is the defaultsetting. You can cancel this setting.See p.35 “Selecting Copy Paper”.
Note❒ Default: ON
❖❖❖❖ Paper Display You can choose to have the availa-ble paper trays and sizes shown onthe initial display.
Note❒ Default: Display❒ If you select [Hide], the display is
shown as below. Press [Auto Pa-per Select] to display paper sizes.
❖❖❖❖ Original Type DisplayYou can have the original typesshown on the initial display.
Note❒ Default: Display
❒ If you select [Hide], the display isas below.
❖❖❖❖ Original Type PriorityYou can select the original type ef-fective when the power is turnedon, or modes cleared. See p.34 “Se-lecting the Original Type”.
Note❒ Default: Full Colour/Two-Col-
our: Text/Photo, B&W/SingleColour: Text/Photo
❖❖❖❖ Original Photo Type PriorityWhen you select “Text/Photo” or“Photo” in “Original Type Priori-ty”, you can change the settings ofthe selected original type.
Note❒ Default: Text/Photo: Printed
Photo, Photo: Printed Photo
0816JupiterC1_GB_Copy_FM.book Page 112 Monday, July 26, 2004 3:12 PM
Settings You Can Change with User Tools
113
5
❖❖❖❖ Auto Tray SwitchingIf you load paper of the same sizein two or more trays, the machineautomatically shifts to the otherwhen the first tray runs out of pa-per (when Auto Paper Select is se-lected.) This function is called“Auto Tray Switching”. This set-ting specifies whether to use AutoTray Switching or not.
Note❒ Default: With Image Rotation❒ [With Image Rotation] Use to copy
when using the Auto TraySwitching function.
❒ [Without Image Rotation] Onlycopies with Auto Tray Switch-ing if you load paper of thesame size and in the same orien-tation in two or more trays. Ifthe paper is not the same size orin the same orientation, copyingis interrupted and the message“Load paper.” is displayed.
❒ [Off] When a paper tray runs outof paper, copying is interruptedand the message “Load pa-per.” is displayed.
General Features 2/5
❖❖❖❖ Duplex Mode Priority You can select the type of the Du-plex function effective when thepower is turned on, or modes arecleared.
Note❒ Default:
• Metric version: 1 Sided→1Sided
• Inch version: 1 Sided→2 Sided
❖❖❖❖ Copy Orientation in Duplex ModeYou can set the copy orientationwhen making two-sided copies.
Note❒ Default: Top to Top
❖❖❖❖ Original Orientation in Duplex ModeYou can set the original orientationwhen making two-sided copies.
Note❒ Default: Top to Top
❖❖❖❖ Change Initial Mode You can select standard mode orProgram No.10 as the mode effec-tive when power is turned on, ormodes are cleared.
Note❒ Default: Standard
❖❖❖❖ Max. Copy Quantity The maximum copy quantity canbe set between 1 and 999.
Note❒ Default: 999 Sheets
0816JupiterC1_GB_Copy_FM.book Page 113 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
114
5
❖❖❖❖ Tone: Original remainsThe beeper (key tone) sounds ifyou forget to remove originals af-ter copying.
Note❒ Default: ON
❒ If Panel Tone in User Tools (Sys-tem Settings) is [OFF], the beep-er does not sound, whatever theTone: Original remains setting.See “Panel Tone” in “GeneralFeatures” , General SettingsGuide.
❖❖❖❖ Job End CallYou can choose to have the beepersound when copying is complete.
Note❒ Default: ON❒ If Panel Tone of User Tools (Sys-
tem Settings) settings is [ON],the machine beeps to notify youthat it did not complete a job forreasons such as: the paper trayran out of paper, or a paper jamoccurred.
General Features 3/5
❖❖❖❖ Copy Function Key: F1-F5You can assign frequently usedfunctions to function keys F1 to F5.
Note❒ Default:
• Copy Function Key: F1: 1 Sided→2 Sided: T to T
• Copy Function Key: F2: 2 Sided: T to T→2 Sided: T to T
• Copy Function Key: F3: 1 Sided→1 Sided Combine
• Copy Function Key: F4: 1 Sided→1 Sided Combine: 4 originals
• Copy Function Key: F5: Create Margin
0816JupiterC1_GB_Copy_FM.book Page 114 Monday, July 26, 2004 3:12 PM
Settings You Can Change with User Tools
115
5
General Features 4/5
❖❖❖❖ Document Server Storage Key: F1–F5You can assign frequently usedfunctions to function keys F1 to F5.You can also change assignedfunctions.
Note❒ Default:
• Document Server StorageKey: F1: 2 Sided Original Topto top
• Document Server StorageKey: F2: 1 Sided→1 SidedCombine
• Document Server StorageKey: F3: 1 Sided→1 SidedCombine: 4 originals
• Document Server StorageKey: F4: 1 Sided→1 SidedCombine: 8 originals
• Document Server StorageKey: F5: Create Margin
General Features 5/5
❖❖❖❖ Clear Bypass ModeYou can set whether to “Clear” or“Do not Clear” bypass tray set-tings when the machine is turnedon, reset, or modes are cleared.
Note❒ Default: Clear
❖❖❖❖ Colour Mode PriorityYou can select to prioritize “AutoColour Select”, “Full Colour”, or“Black & White” when the ma-chine is turned on, reset, or modesare cleared.
Note❒ Default: Black & White
❖❖❖❖ Two-colour Mode PriorityYou can set whether to prioritize“Red & Black” or “Two-colour” inTwo-colour mode.
Note❒ Default: Red & Black
❖❖❖❖ Auto Image Density PriorityYou can set whether Auto ImageDensity is “ON” or “OFF” whenthe machine is turned on, reset, ormodes are cleared.
Note❒ Default: Full Colour/Two-col-
our: OFF, B&W/Single Colour:ON
❒ When using the Auto ColourSelect function, the settings ofFull Colour/Two-colour will beeffective.
0816JupiterC1_GB_Copy_FM.book Page 115 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
116
5
Reproduction Ratio 1/2
❖❖❖❖ Shortcut R/EYou can register up to three fre-quently used Reduce/Enlarge ra-t i o s o t he r t h an t he f i xe dReduce/Enlarge ratio and havethem shown on the initial display.You can also change registered Re-duce/Enlarge ratios.If no Reduce/Enlarge ratio hasbeen set when selecting [ShortcutR/E 1], [Shortcut R/E 2], or [ShortcutR/E 3], enter the ratio using thenumber keys.
❖❖❖❖ Enlarge 1-5You can customize available en-largement ratios by pressing [Re-duce/Enlarge], followed by [Enlarge].
Note❒ Default:
• Metric version:• Enlarge 1: 115%
• Enlarge 2: 122%• Enlarge 3: 141%
• Enlarge 4: 200%
• Enlarge 5: 400%
• Inch version:• Enlarge 1: 121%• Enlarge 2: 129%
• Enlarge 3: 155%
• Enlarge 4: 200%
• Enlarge 5: 400%❒ When selecting [User Enlrg. Ra-
tio], enter a ratio using thenumber keys (in the range of101 to 400%).
❖❖❖❖ Priority Setting: Enlarge You can set the ratio with prioritywhen [Reduce/Enlarge] is pressed,followed by [Enlarge].
Note❒ Default:
• Metric version: 141%
• Inch version: 155%
Reproduction Ratio 2/2
❖❖❖❖ Reduce 1-6You can customize available re-duction ratios by pressing [Re-duce/Enlarge], followed by [Reduce].
Note❒ Default:
• Metric version:• Reduce 1: 25%
• Reduce 2: 50%• Reduce 3: 65%
• Reduce 4: 71%
• Reduce 5: 75%
• Reduce 6: 82%• Inch version:
• Reduce 1: 25%
• Reduce 2: 50%
• Reduce 3: 65%• Reduce 4: 73%
• Reduce 5: 78%
• Reduce 6: 85%
❒ When selecting [User Redc.Ra-tio], enter a ratio using thenumber keys (in the range of 25to 99%).
Enlarge1 Enlarge2 Enlarge3 Enlarge4 Enlarge5
Reduce1 Reduce2 Reduce3 Reduce4 Reduce5 Reduce6
0816JupiterC1_GB_Copy_FM.book Page 116 Monday, July 26, 2004 3:12 PM
Settings You Can Change with User Tools
117
5
❖❖❖❖ Priority Setting: Reduce You can set the ratio with prioritywhen [Reduce/Enlarge] is pressed,followed by [Reduce].
Note❒ Default:
• Metric version: 71%
• Inch version: 73%
❖❖❖❖ Ratio for Create Margin You can set a Reduce/Enlarge ra-tio when registering Create Mar-gin in a shortcut key.
Note❒ Default: 93%
❖❖❖❖ R/E PrioritySpecifies which tab has priority onthe display panel when [Reduce/En-large] is pressed.
Note❒ Default: Reduce
Edit1/2
Note❒ Enter the width of the binding
margin using the number keys, asfollows:• Metric version: 0–30 mm (1 mm
increments)• Inch version: 0"–1.2" (0.1 in in-
crements)❒ Enter the width of the erased mar-
gin using the number keys as fol-lows:• Metric version: 2–99 mm (1 mm
increments)• Inch version: 0.1"–3.9" (0.1 in in-
crements)
❖❖❖❖ Front Margin: Left/Right You can specify left and right mar-gins on the front side of copies us-ing the M arg in Adj ust mentfunction.
Note❒ Default:
• Metric version: Left 5 mm• Inch version: Left 0.2"
❖❖❖❖ Back Margin: Left/Right You can specify left and right mar-gins on the back side of copies us-ing the M arg in Adj ust mentfunction.
Note❒ Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
❖❖❖❖ Front Margin: Top/Bottom You can specify top and bottommargins on the front side of copiesusing the Margin Adjustmentfunction.
Note❒ Default:
• Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖❖❖❖ Back Margin: Top/Bottom You can specify top and bottommargins on the back side of copiesusing the Margin Adjustmentfunction.
Note❒ Default:
• Metric version: T/B 0 mm
• Inch version: T/B 0.0"
0816JupiterC1_GB_Copy_FM.book Page 117 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
118
5
❖❖❖❖ 1 Sided→→→→2 Sided Auto Margin: TtoTWhen using the 1 sided → 2 sidedDuplex function, you can specifymargins on the back side.The margin is set to the same valueas “Back Margin: Left/Right”.
Note❒ Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
❖❖❖❖ 1 Sided→→→→2 Sided Auto Margin: TtoBWhen using the 1 sided → 2 sidedDuplex function, you can specifymargins on the back side. The mar-gin is set to the same value as“Back Margin: Top/Bottom”.
Note❒ Default:
• Metric version: T/B 0 mm
• Inch version: T/B 0.0"
❖❖❖❖ Erase Border Width You can specify the width oferased border margins using thisfunction.
Note❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
❖❖❖❖ Erase Original Shadow in CombineIn Combine Copy or MagazineCopy mode, you can speci fywhether to erase a 3mm, 0.1"bounding margin around all fouredges of each original.
Note❒ Default: Yes
❖❖❖❖ Erase Centre Width You can specify the width of theerased centre margins using thisfunction.
Note❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
Edit 2/2
Note❒ An image of approximately 1.5
mm (0.06”) will not be displayed asthe width of the separation line,when specifying solid or brokenlines.
❖❖❖❖ Front Cover Copy in Combine You can make a combined copy onthe front cover sheet when you se-lect the Front Cover function.
Note❒ Default: Combine
GCST019E
0816JupiterC1_GB_Copy_FM.book Page 118 Monday, July 26, 2004 3:12 PM
Settings You Can Change with User Tools
119
5
❖❖❖❖ Copy Order in CombineYou can set the copy order whenusing the Combine function to Leftto Right or Top to Bottom.
Note❒ Default: From left to right
❖❖❖❖ Image Repeat Separation Line You can select a separation lineand colour using the Image Repeatfunction from: None, Solid, BrokenA, Broken B, or Crop Marks.• None
• Solid
• Broken A
• Broken B
• Crop Marks
Note❒ Default: None
❒ Line colour (Full Colour): Yel-low, Red, Cyan, Magenta ,Green, Blue, Black
❒ Separation lines cannot be spec-ified when using [None].
❒ In “Black and White”, printingwill be done in black; in “SingleColour”, printing will be donein the specified colour; in “Two-Colour” (standard), printingwill be done in the specified col-our of the black area; and in“Two-Colour” (Red and Black),printing will be done in black.
❒ An image of approximately 1.5mmwill not be displayed as the widthof the separation line, when spec-ifying solid or broken lines.
❖❖❖❖ Double Copies Separation Line You can select a separation line us-ing the Double Copies functionfrom: None, Solid, Broken A, Bro-ken B, or Crop Marks.• None
• Solid
• Broken A
• Broken B
• Crop Marks
GCAH090E
0816JupiterC1_GB_Copy_FM.book Page 119 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
120
5
Note❒ Default: None
❒ Line colour (Full Colour): Yel-low, Red, Cyan, Magenta ,Green, Blue, Black
❒ Separation lines cannot be spec-ified when using [None].
❒ In “Black and White”, printingwill be done in black; in “SingleColour”, printing will be donein the specified colour; in “Two-Colour” (standard), printingwill be done in the specified col-our of the black area; and in“Two-Colour” (Red and Black),printing will be done in black.
❒ Images of approximately 1.5mmwill not be displayed as thewidth of the separation linewhen solid or broken lines havebeen specified.
❖❖❖❖ Separation Line in Combine You can select a separation line us-ing the Combine function from:None, Solid, Broken A, Broken B,or Crop Marks. See p.57 “1 SidedCombine” and p.58 “2 Sided Com-bine”.• None
• Solid
• Broken A
• Broken B
• Crop Marks
Note❒ Default: None
❒ Line colour (Full Colour): Yel-low, Red, Cyan, Magenta ,Green, Blue, Black
❒ Separation lines cannot be spec-ified when using [None].
❒ In “Black and White”, printingwill be done in black; in “SingleColour”, printing will be donein the specified colour; in “Two-Colour” (standard), printingwill be done in the specified col-our of the black area; and in“Two-Colour” (Red and Black),printing will be done in black.
❒ Images of approximately 1.5mmwill not be displayed as the widthof the separation line when solidor broken lines have been speci-fied.
❖❖❖❖ Orientation: MagazineYou can select the orientation ofcopies to open when using Maga-zine function.
Note❒ Default: Open to left
Referencep.62 “How to fold and unfoldcopies to make a magazine”
0816JupiterC1_GB_Copy_FM.book Page 120 Monday, July 26, 2004 3:12 PM
Settings You Can Change with User Tools
121
5
Stamp
Preset Stamp 1/4-4/4
❖❖❖❖ Stamp PriorityYou can select the stamp type giv-en priority when [Preset Stamp] ispressed. See p.70 “Preset Stamp”.
Note❒ Default: COPY
❖❖❖❖ Stamp Language You can select the language of thestamp.
Note❒ Default: English
❖❖❖❖ Stamp PositionYou can set the position where thestamp is printed.Press the arrow keys to adjust theposition.
Note❒ Default:
• Metric Version:• Position: Top right
• Top Margin: 24 mm• Right Margin: 24 mm
• Inch Version:• Position: Top right
• Top Margin: 1.0"• Right Margin: 1.0"
❖❖❖❖ Stamp FormatYou can adjust the stamp's size,density, and print page.• Size
You can set the size of thestamp.
Note❒ Default: 1X
• DensityYou can set the pattern used toprint the stamp.
Note❒ Default: Normal❒ Normal: The stamp is print-
ed on the image. You cannotcheck which parts will over-lap.
❒ Lighter: The image can beseen through the stamp.
❒ Lightest: The image appearseven clearer than in theLighter setting.
• Page to StampYou can have the stamp printedon the first page or all pages.
Note❒ Default: All Pages
❖❖❖❖ Stamp ColourSets the stamp print colour.
Note❒ Default: Black
0816JupiterC1_GB_Copy_FM.book Page 121 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
122
5
User Stamp 1/2-2/2
❖❖❖❖ Program/Delete StampYou can register, change, or deletethese user stamp designs.
Note❒ You can register up to four cus-
tom stamps with your favouritedesigns. See p.73 “To programthe user stamp”.
ReferenceFor how to delete the userstamp, see p.74 “To delete theuser stamp”.
❖❖❖❖ Stamp Position 1 - 4You can set the position where thestamp is printed.Press the arrow keys to adjust theposition.
Note❒ Default:
• Metric version:• Position: Top right
• Top Margin: 24 mm• Right Margin: 24 mm
• Inch version:• Position: Top right
• Top Margin: 1.0"• Right Margin: 1.0"
❖❖❖❖ Stamp Format 1 - 4You can adjust the print page forUser Stamps 1 to 4 already regis-tered.• Page to Stamp
Sets whether to print the stampon all pages or only the firstpage.
Note❒ Default: All Pages
❖❖❖❖ Stamp Colour: 1 - 4Sets the colour registered in UserStamp colour (1 to 4).
Note❒ Default: Black
Date Stamp
❖❖❖❖ FormatYou can select the date format forthe Date Stamp function.
Note❒ Default:
• Metric version: DD/MM/YYYY
• Inch version: MM/DD/YYYY
❖❖❖❖ FontYou can select the Date Stamp font.
Note❒ Default: Font 1
❒ This setting is linked to the PageNumbering function.
❖❖❖❖ Stamp PositionYou can set the position where thestamp is printed.Press the arrow keys to adjust theposition.
Note❒ Default:
• Metric version:• Position: Top left
• Top Margin: 8 mm
• Left Margin: 32 mm• Inch version:
• Position: Top left
• Top Margin: 0.3"
• Left Margin: 0.8"
0816JupiterC1_GB_Copy_FM.book Page 122 Monday, July 26, 2004 3:12 PM
Settings You Can Change with User Tools
123
5
❖❖❖❖ Stamp SettingYou can have the date printed onthe first page or all pages.
Note❒ Default: All Pages
❖❖❖❖ SizeYou can set the Date Stamp size.
Note❒ Default: Auto
❖❖❖❖ SuperimposeYou can have the Date Stampprinted in white where it overlapsblack parts of the image.
Note❒ Default: No
❖❖❖❖ Stamp ColourYou can set the selected prioritycolour when printing the date.
Note❒ Default: Black
Page Numbering 1/3-2/3
❖❖❖❖ Stamp FormatYou can select the page numberformat given priority when [PageNumbering] is pressed.
Note❒ Default: P1, P2
❖❖❖❖ FontYou can select the page numberfont.
Note❒ Default: Font 1
❖❖❖❖ SizeYou can set the size of the pagenumber.
Note❒ Default: Auto
❖❖❖❖ Duplex Back Page Stamping Position You can set the position of the du-plex back page number printed us-ing the Duplex function.
Note❒ Default: Opposite position
❖❖❖❖ Page Numbering in Combine You can set page numbering whenusing the Combine and PageNumbering function together.
Note❒ Default: Per original
❖❖❖❖ Stamp Position P1, P2... Stamp Position: 1/5, 2/5...Stamp Position: –1–, –2–... StampPosition: P.1, P.2. Stamp Position:1, 2... Stamp Position: 1–1, 1–2...You can set the position where thestamp is printed.Press the arrow keys to adjust theposition.
❖❖❖❖ SuperimposeYou can have page numbers print-ed in white where they overlapblack parts of the image.
Note❒ Default: No
❖❖❖❖ Stamp ColourYou can set the selected prioritycolour when printing the date.
Note❒ Default: Black
0816JupiterC1_GB_Copy_FM.book Page 123 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
124
5
Input/Output
❖❖❖❖ Switch to Batch (SADF)You can select to have the Batch orSADF function displayed whenyou press [Special Original]. See p.15“Batch”.
Note❒ Default: Batch
❖❖❖❖ SADF Auto Reset In SADF mode, an original must beset within a specific time after theprevious original has been fed.You can adjust this time from 3 sec-onds to 99 in 1 second increments.
Note❒ Default: 5 seconds
❖❖❖❖ Rotate Sort: Auto Paper ContinueYou can continue copying whenpaper of the required orientationhas run out during rotate-sorting.See p.43 “Rotate Sort”.
Note❒ If you select [No] :
• When paper of the requiredorientation runs out, the ma-chine stops copying andprompts you to supply copypaper. When you load paper,the machine will continuecopying.
❒ If you select [Yes] : • Copying continues using
copy paper of a different ori-entation. The copy job willfinish even if the machine isleft unattended.
❒ Default: No
❖❖❖❖ Auto SortYou can specify whether the Sortfunction is to be selected when themachine is turned on, or when thefunctions are cleared.
Note❒ Default: No
❖❖❖❖ Memory Full Auto Scan RestartIf memory becomes full whilescanning originals, the machinewill copy the scanned originalsfirst, and then automatically pro-ceed scanning remaining originals.You can enable or disable thisfunction.
Note❒ If you select [No] :
• When memory becomes full,the machine stops operation,allowing you to remove thecopies on the output tray.
❒ If you select [Yes] :• You can leave the machine
unattended to make copies,but sorted pages will not besequential.
❒ Default: No
❖❖❖❖ Select Stack Function Specify whether Stack or RotateSort has priority on the initial dis-play.
Note❒ Default: Stack
❒ An 2 tray finisher or booklet fin-isher is required to use thisfunction.
0816JupiterC1_GB_Copy_FM.book Page 124 Monday, July 26, 2004 3:12 PM
Settings You Can Change with User Tools
125
5
❖❖❖❖ Select Stapling PositionSpecify which Top 2 staples or Bot-tom shown on the initial displaywith priority.
Note❒ Default: Top 2
❒ The 2 tray finisher or bookletfinisher is required to use thisfunction.
❖❖❖❖ Letterhead SettingIf you select [Yes] for this function,the machine rotates images cor-rectly.
Note❒ Default: No
❒ Orientation-fixed (top to bot-tom) or two-sided paper mightnot print correctly dependingon how the originals and paperare placed.
ReferenceWhen using letterhead paper,pay attention to the paper orien-tation. See “Orientation–FixedPaper or Two-Sided Paper” in“Loading Paper”, General Set-tings Guide.
Adjust Colour Image
❖❖❖❖ Background Density of ADS(Full Col-our / Two-colour)The background density is adjust-ed to skip the texture and copy.You can adjust the backgrounddensity up to 5 levels when in FullColour or Two-colour.
Note❒ Default: Centre of the 5 level ad-
justment
❖❖❖❖ Colour SensitivityYou can adjust the tone of red in“Two colour (Red & Black)”, thecolour specified to convert in “Col-our Convert” and the colour speci-fied for “Erase Colour”, in 5 levels.
Note❒ Default: Centre of the 5 level ad-
justment❒ When the colour width has been
set to “Wider”, and the colour tobe deleted, for example is red,all the colours that are close tomagenta and orange are delet-ed. If it's set to “Narrower” thecolour red will be deleted.
❖❖❖❖ A.C.S. SensitivityThis 5-step setting determines thelevel of the standard used for dis-criminating between black & whiteoriginals and full colour originalswhen “Auto Colour Select” is se-lected.
Note❒ Default: Centre of the 5 level ad-
justment
0816JupiterC1_GB_Copy_FM.book Page 125 Monday, July 26, 2004 3:12 PM
User Tools (Copier/Document Server Features)
126
5
❖❖❖❖ A.C.S. PriorityThis setting determines the copypriority between “Black & White”and “Full Colour” when “AutoColour Select” is selected.
Note❒ Default: Full Colour
0816JupiterC1_GB_Copy_FM.book Page 126 Monday, July 26, 2004 3:12 PM
127
6. Specifications
Combination Chart
The combination chart below shows which functions can be used together. Thefollowing tables explains the symbols used in the chart.
means that these functions can be used together.
$ means that these functions cannot be used together. The second function selected will be the function you are working in.
× means that these functions cannot be used together. The first func-tion selected will be the function you are working in.
0816JupiterC1_GB_Copy_FM.book Page 127 Monday, July 26, 2004 3:12 PM
Specifications
128
6
Supplementary Specifications
❖❖❖❖ Mixed Size mode• Since small originals may not be correctly aligned with the original guide,
the copy image may be slanted.• Copying speed and scanning speed will be reduced.• You can place originals of two different sizes at a time.
❖❖❖❖ Bypass Tray Copy• The following paper sizes can be selected as the standard sizes:
A3L, A4KL, A5KL, A6L, B4 JISL, B5 JISKL, B6 JISL, PostcardL,11"×17"L, 81/2"×14"L, 81/2"×11"KL, 51/2"×81/2"L, 71/4"×101/2"KL,8"×13"L, 81/2"×13"L, 81/4"×13"L, 12"×18"L
• When the beeper is turned off, it will not sound when you insert paper intothe bypass tray. See “Panel Tone”General Settings Guide.
❖❖❖❖ Preset Enlarge/Reduce• You can select one of 12 preset ratios (5 enlargement ratios, 7 reduction ra-
tios).• You can select a ratio regardless of the size of an original or copy paper.
With some ratios, parts of the image might not be copied or margins willbe displayed on copies.
• Copies can be reduced or enlarged as follows:
❖❖❖❖ Metric version
Ratio (%) Original →→→→ Copy paper size
400 (enlarge area by 16) --
200 (enlarge area by 4) A5→A3
141 (enlarge area by 2) A4→A3, A5→A4
122 F→A3, A4→B4 JIS
115 B4 JIS→A3
93 --
82 F→A4, B4 JIS→A4
75 B4 JIS→F4, B4 JIS→F
71 (reduce area by 1/2) A3→A4, A4→A5
65 A3→F
50 (reduce area by 1/4) A3→A5, F→A5
25 --
0816JupiterC1_GB_Copy_FM.book Page 128 Monday, July 26, 2004 3:12 PM
Supplementary Specifications
129
6
❖❖❖❖ Inch version
❖❖❖❖ Zoom• The reproduction ratios you can specify are 25–400%.• You can select a ratio regardless of the size of an original or copy paper.
With some ratios, parts of the image might not be copied or margins willbe displayed on copies.
❖❖❖❖ Size Magnification• If the calculated ratio is over the maximum or under the minimum ratio, it
is automatically adjusted to within available range. However, with someratios, parts of the image might not be copied or margins will be displayedon copies.
• The reproduction ratios you can specify are 25–400%.
❖❖❖❖ Directional Size Magnification• The reproduction ratio you can specify are 25–400%.• When entering a percentage ratio, you can specify any value in the permit-
ted range, regardless of original or copy paper size. However, dependingon settings and other conditions, part of the image may not be copied, ormargins will be displayed on copies.
• When entering a size in millimeters or inches, and the calculated ratio isover the maximum or under the minimum ratio, it will be automaticallyadjusted to within available range. However, with some ratios, parts of theimage might not be copied or margins will be displayed on copies.
Ratio (%) Original →→→→ Copy paper size
400 (enlarge area by 16) --
200 (enlarge area by 4) 51/2" × 81/2"→11" × 17"
155 (enlarge area by 2) 51/2" × 81/2"→81/2" × 14"
129 81/2" × 11"→11" × 17"
121 81/2" × 14"→11" × 17"
93 --
85 F→81/2" × 11"
78 81/2" × 14"→81/2" × 11"
73 11" × 15"→81/2" × 11"
65 11" × 17"→81/2" × 11"
50 (reduce area by 1/4) 11" × 17"→51/2" × 81/2"
25 --
0816JupiterC1_GB_Copy_FM.book Page 129 Monday, July 26, 2004 3:12 PM
Specifications
130
6
❖❖❖❖ Sort, Rotate Sort, Stack• Paper sizes and orientations that can be used in the Shift Sort and Stack
functions are as follows:
• Paper sizes and orientations that can be used in the Rotate Sort function areA4KL, B5 JISKL, 81/2" × 11"KL and 51/2" × 81/2"KL.
• The number of copies that can be placed on the tray is as follows. When thenumber of copies exceeds capacity, remove copies from the tray.
2 tray finisher Booklet finisher
Pap
er s
ize
and
ori
enta
tion A3L, B4 JISL, A4KL, B5
JISKL, A5K, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
A3L, B4 JISL, A4KL, B5 JISK,
11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
Paper size and orientation Paper capacity and weight
Standard tray • A4K or smaller
• 81/2" × 11"K or smaller
500 sheets (80 g/m2) (20 lb.)
• B4 JISL or larger
• 81/2" × 14"L or larger
250 sheets (80 g/m2) (20 lb.)
External tray A3L, B4 JISL, A4KL, B5 JISKL, A5L, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL, 51/2" × 81/2"L
100 sheets
Left tray Left tray 1
A3L, B4 JISL, A4KL, B5 JISKL, 81/2" × 14"L, 81/2" × 11"KL, 51/2" × 81/2"L
100 sheets
Left tray 2
A3L, B4 JISL, A4KL, B5 JISKL, 81/2" × 14"L, 81/2" × 11"KL, 51/2" × 81/2"L
250 sheets
0816JupiterC1_GB_Copy_FM.book Page 130 Monday, July 26, 2004 3:12 PM
Supplementary Specifications
131
6
Note❒ When using the Rotate Sort or Staple functions, the capacity may be re-
duced.
2 tray finisher Finisher shift tray 1
A4KL, B5 JISKL, A5K, 81/2" × 11"KL 500 sheets (80 g/m2) (20 lb.)
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 250 sheets (80 g/m2) (20 lb.)
Finisher shift tray 2 (No staple)
A4K, 81/2" × 11"K 2000 sheets (80 g/m2) (20 lb.)
A3L, B4 JISL, A4L, B5 JISKL, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"L
750 sheets (80 g/m2) (20 lb.)
A5K 500 sheets (80 g/m2) (20 lb.)
Finisher shift tray 2 (staple)
A4K, 81/2" × 11"K 1500 sheets (80 g/m2) (20 lb.)
A3L, B4 JISL, A4L, B5 JISKL, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"L
750 sheets (80 g/m2) (20 lb.)
Booklet finish-er
Finisher shift tray
A4KL, B5 JISKL, 81/2" × 11"KL 1000 sheets (80 g/m2) (20 lb.)
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 500 sheets (80 g/m2) (20 lb.)
Finisher booklet tray
A3L, B4 JISL, A4L, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"L
(80 g/m2) (20 lb.)
• 2–5 sheets: 20 sets
• 6–10 sheets: 10 sets
Paper size and orientation Paper capacity and weight
0816JupiterC1_GB_Copy_FM.book Page 131 Monday, July 26, 2004 3:12 PM
Specifications
132
6
❖❖❖❖ Staple • The following types of paper cannot be stapled:
• Translucent paper• OHP transparencies• Label paper (adhesive labels)• Thick paper• Curled paper• Paper of low stiffness• Paper of mixed sizes
• In the following cases, copies will be delivered to the shift tray without sta-pling:• When the number of sheets for one set is over stapler capacity• When memory reaches 0% during copying
• When using Double Copies, or [1 Sided→1 Sided], [1 Sided→2 Sided], [2Sided→1 Sided], or [2 Sided→2 Sided] in Combine mode, select K paperfor L original and L paper for K original.
• When using Double Copies, or [1 Sided 2 Pages→ 1 Sided Combine] and[1 Sided 4 Pages→ 2 Sided Combine] in Combine mode, select K paper forL original and L paper for K original.
• When using [Left 2] or [Top 2] with Double Copies, or [1 Sided→1 Sided],[1 Sided→2 Sided], [2 Sided→1 Sided], or [2 Sided→2 Sided] in Combinemode, select K paper for L original and L paper for K original.
• When the finisher is installed, even if you place different size originals inthe ADF, appropriate size of copy paper can be automatically selected andstapled using the Mixed Size mode and Auto Paper Select function. Loadthe paper you want to use in the paper trays beforehand. Paper sizes thatcan be stapled when using the Mixed Size mode are as follows:• A3L and A4K• B4 JISL and B5 JISK• 11" × 17"L and 81/2" × 11"K
• Paper sizes and orientation that can be used in the Staple function and thestapler capacity are as follows:
Paper size Stapler capacity
2 tray finisher A4KL, B5 JISKL, 81/2" × 11"KL 2–50 sheets
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 2–30 sheets
Booklet finisher A4KL, B5 JISK, 81/2" × 11"KL 2–50 sheets
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 2–25 sheets
When Saddle Stitch function is selected:
A3L, B4 JISL, A4L, 11" × 17"L, 81/2" × 11"L, 81/2" × 14"L
2–10 sheets
mixed size 2–25 sheets
0816JupiterC1_GB_Copy_FM.book Page 132 Monday, July 26, 2004 3:12 PM
Supplementary Specifications
133
6
Note❒ When stapling B4L, A3L, 81/2" × 14"L, 11" × 17"L, pull out the ex-
tender of the finisher tray.❒ When the number of copies exceeds tray capacity, copying stops. If this
happens, remove the copies from the shift tray, and then resume copy-ing.
• The tray capacity for the stapled sheets is as follows: (paper weight: 80g/m2, 20 lb.)
• You cannot change stapling positions during copying.• When the original image is rotated, the staple orientation changes by 90°.• The maximum original image size that can be rotated is as follows:
Paper size and orientation Tray capacity
2 tray finisher Finisher shift tray 1
A4KL, B5 JISKL, 81/2" × 11"KL • 10–50 sheets: 50–10 sets
• 2–9 sheets: 50 sets
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L • 10–30 sheets: 25–8 sets
• 2–9 sheets: 25 sets
mixed size • 2–30 sheets: 8 sets
Finisher shift tray 2
A4K, 81/2" × 11"K • 15–50 sheets: 100–30 sets
• 2–14 sheets: 100 sets
A4L, B5 JISKL, 81/2" × 11"L • 15–50 sheets: 50–15 sets
• 2–14 sheets: 50 sets
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L • 15–30 sheets: 50–25 sets
• 2–14 sheets: 50 sets
mixed size • 2–30 sheets: 25 sets
Booklet finisher Finisher tray
A4KL, B5 JISK, 81/2" × 11"KL 1000 sheets or 30 sets
A3L, B4 JISL, 11" × 17"L, 81/2" × 14"L 500 sheets or 30 sets
Finisher booklet tray
A3L, B4 JISL, A4L, 11" × 17"L, 81/2" × 11"L, 81/2" × 14"L
• 2–5 sheets: 20 sets
• 6–10 sheets: 10 sets
Metric version A4
Inch version 81/2" × 11"
0816JupiterC1_GB_Copy_FM.book Page 133 Monday, July 26, 2004 3:12 PM
Specifications
134
6
• When using [Top Slant], [Left 2] or [Top 2] with Combine, Double copies orAuto Reduce/Enlarge function, “Blank part will appear. Check ori-entation.”message may appear depending on the orientation of origi-nals and paper you placed. In this case, change the paper orientation.
• When [Left 2] or [Top 2] is selected, the following settings are useful to rotateimages appropriately:• Auto Reduce/Enlarge or Auto Paper Select• With image rotation in Auto Tray Switching of User Tools
• If you select Saddle Stitch function with the booklet finisher, the machinestaples and folds the paper in the centre, then delivers the paper folded.
• If you select Saddle Stitch function in Magazine mode, the machine staplesthe paper, and folds it like a book, then delivers the paper folded.
❖❖❖❖ Punch• When using Punch and Combine, Double Copies, or Auto Reduce/En-
large, the message “Blank part will appear. Check orientation.”may appear because of the orientation of the original and the copy paper.If this occurs, change the orientation of the copy paper.
• Since punch holes are made in each copy, the punch hole positions varyslightly.
• Punchable paper sizes are as follows:
• The punch hole positions change according to the orientation of the paperselected.
2 tray finisher
Punch kit type
2 & 4 holes type 2 holes L A3-B5 JIS, 11" × 17"
K A4-A5, 81/2" × 11"
4 holes L A3, B4 JIS, 11" × 17"
K A4, B5 JIS, 81/2" × 11"
4 holes type 4 holes L A3-B5 JIS, 11" × 17"
K A4-A5, 81/2" × 11"
2 & 3 holes type 2 holes L A3-B5 JIS, 11" × 17"
K A4-A5, 81/2" × 11"
3 holes L A3, B4 JIS, 11" × 17"
K A4, B5 JIS, 81/2" × 11"
Booklet finisher
Punch kit type
2 holes type 2 holes L A3, A4, B4 JIS, B5 JIS, 11" × 17", 81/2" × 14", 81/2" × 11"
K A4, B5 JIS, 81/2" × 11"
4 holes type 4 holes L A3
K A4
0816JupiterC1_GB_Copy_FM.book Page 134 Monday, July 26, 2004 3:12 PM
Supplementary Specifications
135
6
❖❖❖❖ Duplex • You cannot use the following copy paper with this function:
• Paper smaller than A5, 51/2" × 81/2" (possible on A5K, 51/2" × 81/2"K)• Paper thicker than 105 g/m2, 28 lb.• Paper thinner than 60 g/m2, 17 lb.• Translucent paper• OHP transparencies• Label paper (adhesive labels)• Postcards
• When an odd number of originals is placed in the ADF, the back of the lastpage of copied paper is blank.
• During copying, the image is shifted to allow for the binding margin.• The following paper sizes can be duplexed: A3L, B4 JISL, A4KL, B5
JISKL, A5K, 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
❖❖❖❖ Combine• In this mode, the machine selects the reproduction ratio automatically.
This reproduction ratio depends on copy paper sizes and the number oforiginals.
• The reproduction ratios you can specify are 25–400%.• If the calculated ratio is under the minimum ratio, it will be automatically
adjusted to within acceptable range. However, with some ratios, parts ofthe image might not be copied.
• You cannot use custom size paper.• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-ly.
• If the number of originals placed is less than the number specified for com-bining, the last page segment will be left blank as shown.
0816JupiterC1_GB_Copy_FM.book Page 135 Monday, July 26, 2004 3:12 PM
Specifications
136
6
❖❖❖❖ Series Copies• The machine sets the reproduction ratio automatically to meet the paper
size and copies the originals together onto the paper.• The reproduction ratios you can specify are 25–400%.• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within acceptable range. However, with some ratios, parts of theimage might not be copied.
• If the orientation of originals is different from that of the copy paper, themachine will automatically rotate the image by 90° to make copies proper-ly.
• You cannot copy with originals different in size and orientation.• If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.• In Magazine mode, the copying may take some time after scanning origi-
nals.• When the booklet finisher is installed, if you select Saddle Stitch function
in Magazine mode, the machine staples and folds the paper in the centre,then delivers the paper folded.
❖❖❖❖ Image RepeatDepending on the paper size, ratio, and orientation, parts of repeated imagesmay not be copied.
❖❖❖❖ CentringThough the original is set to a different orientation from the paper loaded, themachine will not rotate the image by 90° (Rotate copy).
0816JupiterC1_GB_Copy_FM.book Page 136 Monday, July 26, 2004 3:12 PM
Supplementary Specifications
137
6
❖❖❖❖ EraseThe width of the erased margin varies depending on the reproduction ratio.If the size of the original is different from sizes listed in the following chart,the erased margin might be shifted:• Metric version
• Inch version
❖❖❖❖ Margin Adjustment • If you set a binding margin that is too wide, part of the image may not be
copied.• When making copies in Combine mode, the binding margin is added to
the copies after the combination is finished.
❖❖❖❖ Preset Stamp• You can change the size and density of the stamp with User Tools. De-
pending on the setting, density may change.• Depending on paper size, if you change the stamp size, parts of the stamp
might not be printed.
❖❖❖❖ Date StampWhen using Combine mode, the date stamp is printed as follows:
Where original is placed Paper size and orientation
Exposure glass A3L, B4 JISL, A4KL, B5 JISKL
ADF A3L, B4 JISL, A4KL, B5 JISKL, A5KL
Where original is placed Paper size and orientation
Exposure glass 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL
ADF 11" × 17"L, 81/2" × 14"L, 81/2" × 11"KL, 10" × 14"L, 51/2" × 81/2"L
GCDATE2E
15/12/2003
0816JupiterC1_GB_Copy_FM.book Page 137 Monday, July 26, 2004 3:12 PM
Specifications
138
6
❖❖❖❖ Page Numbering When page numbering is used with Combine mode, page numbers are print-ed as follows:• Page Numbering per original:
Combined with 1 Sided / 2 Sided in the Combine function
• Page Numbering per copy:Combined with 1 Sided / 2 Sided in the Combine function
If you combine this function with the Duplex (Top to Top) function and select[P1, P2] or [1/n, 2/n], page numbers on the back are printed as follows:
1. Front
2. Back
❖❖❖❖ Front Cover, Front/Back Cover• If Blank mode is selected, the cover will not be counted as a copy.• Front and back covers are two-sided copied depending on the settings
made in Display Time in Cover Sheet Tray of User Tools (System Settings). • If Display Time is selected to the At Mode Selected, settings made in
Cover Sheet Tray will take priority.• If Display Time is selected to Full Time, settings made in Paper Type
will take priority.See “Paper Type” and “Cover Sheet Tray” in “Tray Paper Settings”,General Settings Guide.
❖❖❖❖ Slip SheetsIf you do not copy onto slip sheets, they are excluded from the number of cop-ies counted.
GCANPE0E
GCANPE2E
GCSTMPBE
0816JupiterC1_GB_Copy_FM.book Page 138 Monday, July 26, 2004 3:12 PM
139
INDEX1 sided → 2 sided, 552 sided → 1 sided, 552 sided → 2 sided, 5590° turn, 14
A
Accessing user toolscopier/document server features, 110
A.C.S.priority, 126sensitivity, 125
Adjust Colour Image, 125Adjusting
background density, 91colours based on selected colour, 92contrast, 90copy image density, 33sharpness/softness, 90text/photo sensitivity, 91U.C.R., 91
Adjust/Program Colour key, 5Auto
colour selection, 29image density, 33image density priority, 104paper select, 35paper select priority, 103reduce/enlarge, 40tray switching, 113
Auto paper select, 36
B
Background density of ADS (Full Colour/Two-colour), 125
Basic procedure, 19Batch, 15Black/white copy, 29Border erase, 68
C
Centre/border erase, 69Centre erase, 68Change
date format, 76stamp position, 73, 76
Changingnumber of sets, 45registered settings, 89stamp position, 78stamp position, size and density, 71stored program, 86
Check Modes key, 5Clear Modes key, 5Clear/Stop key, 6Colour
adjustment, 87adjustment/program, 87background, 32balance, 88balance program, 88circle, 5functions, 29mode priority, 115selection key, 6
Colour Adjustment, 87Colour functions
convert colours, 31erase colour, 32selecting a colour mode, 29
Colour image settingcolour sensitivity, 125
Coloursmixing manually with number keys, 94
Combination chart, 127Combined auto and manual image
density, 33Control panel, 5Copier/Document Server Features, 103
0816JupiterC1_GB_Copy_FM.book Page 139 Monday, July 26, 2004 3:12 PM
140
Copier functions, 331 sided combine, 572 sided combine, 58adjusting copy image density, 33auto reduce/enlarge, 40book originals, 61centring, 65covers, 81date stamp, 75directional magnification (%), 41directional size magnification (mm), 42double copies, 64duplex, 55margin adjustment, 69page numbering, 77preset reduce/enlarge, 38preset stamp, 70selecting copy paper, 35selecting the original type, 34series copies, 60size magnification, 41slip sheets, 82sort, 43stack, 46staple, 47user stamp, 72zoom, 39
Copy functionsimage repeat, 63mirror, 66positive/negative, 66specified area repeat, 64
Copying, 19back Side of the Paper, 25interrupt copy, 20job preset, 21left original beeper, 21OHP Transparencies or Thick Paper, 24onto envelopes, 26with registered settings, 89
Copying from bypass trayonto custom size paper, 23onto standard size paper, 23
CoversFront, 81front/back, 81
Create margin function, 38
D
Date stamp, 75, 122Change colour, 76change format, 76change position, 76font, 122format, 122position, 122position and original orientation, 75size, 123stamp colour, 123stamp setting, 123superimpose, 123
Deletingprogram, 86registered settings, 89user colours, 94user stamp, 74
Display panel, 5Document server, 83
E
Edit, 105, 1171 sided→2 sided auto margin − T to B, 1181 sided→2 sided auto margin − T to T, 118back margin − left/right, 117back margin − top/bottom, 117copy order in combine, 119double copies separation line, 119erase border width, 118erase centre width, 118erase original shadow in combine, 118front cover copy in combine, 118front margin − left/right, 117front margin − top/bottom, 117image repeat separation line, 119Orientation Magazine, 120separation line in combine, 120
Energy Saver key, 6Erase, 67
border, 67border width, 118centre, 67centre/border, 67centre width, 118colour, 32original shadow in combine, 118
Exiting user tools, 111
0816JupiterC1_GB_Copy_FM.book Page 140 Monday, July 26, 2004 3:12 PM
141
F
Font, 122Format, 122Full colour copy, 29Function status indicators, 6
G
General features, 103, 104, 112, 113, 115auto image density priority, 115auto paper select priority, 112auto tray switching, 113change initial mode, 113clear bypass mode, 115colour mode priority, 115copy function key, 114copy orientation in duplex mode, 113document server storage key, 115duplex mode priority, 113job end call, 114max. copy quantity, 113original orientation in duplex mode, 113original photo type priority, 112original type display, 112original type priority, 112paper display, 112tone − original remains, 114two-colour mode priority, 115
Generation copy, 34
I
Image adjustment, 90background density, 90, 91contrast, 90sharpness/softness, 90text/photo sensitivity, 90, 91U.C.R., 90, 91
Image repeatspecified area repeat, 64whole area repeat, 63
Indicators, 5Input/Output, 108, 124
auto sort, 124letterhead setting, 125memory full auto scan restart, 124rotate sort − auto paper continue, 124SADF auto reset, 124select stack function, 124select stapling position, 125switch to batch (SADF), 124
Interrupt key, 6
K
Keyadjust/program colour, 5check modes, 5clear modes, 5clear/stop, 6energy saver, 6interrupt, 6program, 5sample copy, 6# (sharp), 6start, 6user tools/counter, 5
L
Left originalbeeper, 21
M
Main power indicator, 6Manual image density, 33Manual paper select, 36Map, 34Messages, 95Missing image area, 12Mixed size, 17
N
Number keys, 6
0816JupiterC1_GB_Copy_FM.book Page 141 Monday, July 26, 2004 3:12 PM
142
O
OHP transparencies, 82one-sided combine
1 sided 2 pages → combine 1 side, 571 sided 4 pages → combine 1 side, 571 sided 8 pages → combine 1 side, 572 sided 1 page → combine 1 side, 572 sided 2 pages → combine 1 side, 572 sided 4 pages → combine 1 side, 572 sided 8 pages → combine 1 side, 57
Operation switch, 6Original
combine, 57copy orientation, 56orientation, 13orientation and completed copies, 55orientation in duplex mode, 113photo type priority, 112type display, 112type priority, 112
Originals, 9Originals not recommended for
Auto Document Feeder (ADF), 10
P
Page Numbering, 77, 123Page numbering
colour, 78duplex back page stamping position, 123first printing page, 78font, 123page numbering in combine, 123position, 78position and orientation of originals, 77size, 123stamp colour, 123stamp format, 123stamp position, 123start number, 78superimpose, 123
Pale, 34Photo, 34Placing
custom size originals, 17originals, 9, 13, 14, 15, 17originals in auto document feeder, 15originals on exposure glass, 14
Preset stamp, 121changing colour, 71changing density, 71changing position, 71changing size, 71colour, 121format, 121language, 121position, 121position and original orientation, 71priority, 121
Program key, 5Programs, 85Punch, 51
R
Recalling a program, 86Renaming a colour, 93, 94Reproduction ratio, 104, 105, 116
enlarge, 116priority setting − enlarge, 116priority setting − reduce, 117ratio for create margin, 117reduce, 116R/E priority, 117shortcut R/E, 116
Rotated copy, 37
S
SADF, 16Sample copy, 45Sample copy key, 6Sampling user colours, 94Screen contrast knob, 5Selecting
colour mode, 29copy paper, 35original type, 34
Series copies, 60, 136book → 1 sided, 60book → 2 sided, 60front & back → 2 sided, 60
# (sharp) key, 6Single colour copy, 29Sizes
detectable by auto paper select, 11difficult to detect, 12of recommended originals, 9
0816JupiterC1_GB_Copy_FM.book Page 142 Monday, July 26, 2004 3:12 PM
143
Sort, 43rotate sort, 43shift sort, 44
Specifications, 127Stack, 46Stamp, 121
colour, 121, 122, 123date stamp, 75format, 121, 122, 123language, 121page numbering, 77position, 121, 122, 123position and original orientation, 72, 75preset stamp, 70priority, 121setting, 123user stamp, 72
Standard orientation, 14Stapling position and original setting, 47Start key, 6Storing
adjusted colour balance, 88data, 83program, 85
Superimpose, 123Supplementary informations
bypass tray copy, 128centring, 136combine, 135date stamp, 137directional size magnification, 129duplex, 135erase, 137front/back cover, 138front cover, 138image repeat, 136margin adjustment, 137mixed size mode, 128page numbering, 138preset enlarge/reduce, 128preset stamp, 137punch, 134rotate sort, 130series copies, 136size magnification, 129slip sheets, 138sort, 130stack, 130staple, 132zoom, 129
Supplementary specifications, 128
T
Text, 34Text/Photo, 34Tone − original remains, 114Troubleshooting, 95
memory is full, 101problems operating the machine, 95you cannot make clear copies, 97you cannot make copies as you want, 98
Two colour copy, 29two-sided combine
1 sided 16 pages → combine 2 side, 591 sided 4 Pages → combine 2 side, 581 sided 8 pages → combine 2 side, 582 sided 16 pages → combine 2 side, 592 sided 4 pages → combine 2 side, 592 sided 8 pages → combine 2 side, 59
Types of duplex copies, vi
U
User colour, 92User stamp, 72, 122
changing colour, 73changing position, 73colours, 122delete, 74format, 122position, 122position and original orientation, 72program, 73program/delete, 122
User tools, 103User Tools/Counter key, 5
W
Weights of recommended originals, 9What you can do with this machine, iii, vi
0816JupiterC1_GB_Copy_FM.book Page 143 Monday, July 26, 2004 3:12 PM
144 GB GB B149-7501B
MEMO
0816JupiterC1_GB_Copy_FM.book Page 144 Monday, July 26, 2004 3:12 PM
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=156 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 7.800000 mm
Declaration of Conformity
“The Product complies with the requirements of the EMC Directive 89/336/EEC and its amending di-rectives and the Low Voltage Directive 73/23/EEC and its amending directives.”
In accordance with IEC 60417, this machine uses the following symbols for the main power switch:
aaaa means POWER ON.
bbbb means POWER OFF.
cccc means STAND BY.
Trademark
Acrobat® is a registered trademark of Adobe Systems Incorporated.
Introduction
This manual describes detailed instructions on the operation and notes about the use of this machine.To get maximum versatility from this machine all operators are requested to read this manual carefullyand follow the instructions. Please keep this manual in a handy place near the machine.
Important
Contents of this manual are subject to change without prior notice. In no event will the company be li-able for direct, indirect, special, incidental, or consequential damages as a result of handling or oper-ating the machine.
Notes
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Warning:
Use of controls or adjustment or performance of procedures other than those specified in this manualmight result in hazardous radiation exposure.
Notes:
The model names of the machines do not appear in the following pages. Check the type of your ma-chine before reading this manual. (For details, see P.3 “Machine Types”.)
• Type 1: Aficio 2228C
• Type 2: Aficio 2232C
• Type 3: Aficio 2238C
Certain types might not be available in some countries. For details, please contact your local dealer.
Two kinds of size notation are employed in this manual. With this machine refer to the metric version.
For good copy quality, Ricoh recommends that you use genuine Ricoh toner.
Ricoh shall not be responsible for any damage or expense that might result from the use of parts otherthan genuine Ricoh parts with your Ricoh office products.
Power Source
220–240V, 50/60Hz, 8A or more
Please be sure to connect the power cord to a power source as shown above. For details about powersource, see “Power Connection” in the General Settings Guide.
Copyright © 2003, 2004 Ricoh Co., Ltd.
Paper type: Wood Free 80g/m2, Paper Thickness=100 µm // Pages in book=156 // Print scale=81%Gap (when printed at 81% scale) = Pages in book × Paper thickness / 2 = 7.800000 mm
2228C/2232C
/2238CO
perating InstructionsC
opy Reference
2228C/2232C
/2238CO
pe
rating
Instructio
nsC
op
y Refe
renc
eRICOH COMPANY, LTD.15-5, Minami Aoyama 1-chome,Minato-ku, Tokyo 107-8544, JapanPhone: +81-3-3479-3111
2228C/2232C/2238C
Operating Instructions
Copy Reference
Read this manual carefully before you use this product and keep it handy for future reference.For safe and correct use of this machine, please be sure to read the Safety Information in the "General Settings Guide" before you use it.
Placing Originals
Copying
Colour Adjustment/ Program
Troubleshooting
User Tools (Copier/Document Server Features)
Specifications
Overseas AffiliatesU.S.A.RICOH CORPORATION5 Dedrick PlaceWest Caldwell, New Jersey 07006Phone: +1-973-882-2000
The NetherlandsRICOH EUROPE B.V.Groenelaan 3, 1186 AA, AmstelveenPhone: +31-(0)20-5474111
United KingdomRICOH UK LTD.Ricoh House,1 Plane Tree Crescent, Feltham,Middlesex, TW13 7HGPhone: +44-(0)20-8261-4000
GermanyRICOH DEUTSCHLAND GmbHWilhelm-Fay-Strasse 51,D-65936 Frankfurt am MainPhone: +49-(0)69-7104250
FranceRICOH FRANCE S.A.383, Avenue du Général de GaulleBP 307-92143 Clamart CedexPhone: +33-(0)-821-01-74-26
SpainRICOH ESPAÑA S.A.Avda. Litoral Mar, 12-14,Blue Building, Marina Village,08005 BarcelonaPhone: +34-(0)93-295-7600
ItalyRICOH ITALIA SpAVia della Metallurgia 12,37139 VeronaPhone: +39-045-8181500
ChinaRICOH CHINA CO.,LTD.29/F., Lippo Plaza, No.222Huai Hai Zhong Road,Lu Wan District,Shanghai P.C.:200021Phone: +86-21-5396-6888
SingaporeRICOH ASIA PACIFIC PTE.LTD.260 Orchard Road,#15-01/02 The Heeren,Singapore 238855Phone: +65-6830-5888
Printed in The Netherlands
GB GB B149-7501B