HUGE ONLINE AUCTION(12) LOCATIONS IN TEXAS: CORPUS CHRISTI, HOUSTON AREA,

MT. PLEASANT & CENTRAL TEXAS

ONLINE AUCTION

Headquarters:1304 Langham Creek Drive, Suite 454

Houston, Texas 77084

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

Ron Moore, Texas Lic. #7314

HOUSTON • DALLAS • ST. LOUIS

Sale Conducted By:

Read Partial Terms and Conditions on Last Page of

Brochure

18% BUYER’S PREMIUM

WILL APPLY

SALE DATE: BIDS START CLOSING

ON THURSDAY, DECEMBER 15

10:00 A.M.

INSPECTION: Wednesday, December 14 9:00 A.M. to 4:00 P.M.

or by appointment.

ONLINE BIDDING: YOU MUST REGISTER IN

ADVANCE FOR ONLINE BIDDING AT THIS AUCTION.

Go to www.pmi-auction.com and click on

on our calendar page for this auction sale.

>DOOSAN PUMA

MDL. 400B CNC LATHE

>TOYOTA 17,500-LB.

CAP. FORKLIFT

<HAAS MDL. SL-30 CNC LATHE

<F&G INDUSTRIES 10 T. X APPROX. 50' SPAN OVERHEAD BRIDGE CRANE

TOS 32" X 190" ENGINE LATHE

SAMPLE VIEW OF HUGE QTY. OF ACCESSORIES

CICINNATI 12' X 3/4" HYDRAULIC SHEAR

HYSTER 46,000-LB. CAP. YARD-TYPE FORKLIFT

CNCCNC

2013 2006

2014355 H.O.M.

314 HRS

.

SINCE

REBUILD

2 3

MORI SEIKI MDL. SL-5 CNC LATHE

KITAKO VARIANT TURN CNC LATHE

>PRATT & WHITNEY

MDL. STARTURN 1800 CNC CHUCKER

<PRATT & WHITNEY MDL. STARTURN 1800 CNC LATHE

>OKUMA-HOWA

MDL. MILLAC-4H CNC HORIZONTAL

MACHINING CENTER

<PRATT & WHITNEY MDL. STARTURN 1800 CNC LATHE

CNC LATHESDOOSAN PUMA MDL. 400B, new 2013, 18" chuck, 40" dist. btwn. centers, chip conveyor, S/N ML0126-004835.KITAKO VARIANT TURN, Fanuc 6TB CNC control, 10" chuck, 22" dist. btwn. centers, 12-pos. turret, tailstock, chip conveyor, S/N 7038618.MORI SEIKI MDL. SL-5, (est) 12" chuck, 40" dist. btwn. centers, chip conveyor, S/N N.A.(2) PRATT & WHITNEY MDL. STAR-TURN 1800, (1) Mitsubishi Meldas 50 (M50) Series CNC control, Faunuc 18T CNC control, 18" chuck, 80" dist. btwn. centers, 12-pos. turret, coolant thru turret, tailstock, chip conveyor, S/N 5072-0043, S/N 5072-0069.

CNC CHUCKERPRATT & WHITNEY MDL. STARTURN 1800, Mitsubishi Meldas 50 (M50) Series CNC control, 18" chuck, 80" dist. btwn. centers, 12-pos. turret, chip conveyor, S/N 5072-0065.

CNC HORIZONTAL MACHINING CENTERS

OKUMA-HOWA MDL. MILLAC-4H, Fanuc 6M CNC control, 20" x 16" x 16" travels, 15-3/4" sq. twin shuttle pallets, 360,000 deg. rotary 4th axis, 24-pos. ATC, chip conveyor, S/N 7056577.

OKUMA-HOWA MDL. MILLAC-4H, Fanuc 6M CNC control, 20" x 16" x 16" travels, 15-3/4" sq. twin shuttle pallets, 5 deg. rotary 4th axis, 24-pos. ATC, chip conveyor, S/N 7115201.

DOOSAN PUMA MDL. 400B CNC LATHE

LOCATION AG&S MANUFACTURING

900 Blassingame Road, Hempstead, Texas 77445

INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

PLANT CLOSING

CNC

CNC

CNC

CNC

CNC CNC

CNC

2013

2 3

CNC VERTICAL MACHINING CENTERKIA MDL. KV40A-0MB, new 11/1989, Fanuc OM-B CNC control, 24" x 14" x 18" working cap., 20-pos. ATC, chip conveyor, S/N 94086.

HEAVY-DUTY ENGINE LATHELEBLOND 16", 18" chuck, 108" dist. btwn. centers, taper attach., tailstock, (est.) 2" hole thru spndl., S/N 2NE576.

FORKLIFTDAEWOO 6,000-LB. CAP. MDL. GC30S-2, LP gas pwrd., 3-stage mast, 173" lift ht., 4' forks, cushion tires, S/N 06-04004.

JIB CRANESABELL-HOWE 1 T. CAP., Yale 1 T. cap. elec. chain hoist w/pendant control.

GAFFEY 1/2 T. CAP., elec. chain hoist w/pendant control.

HANDLING SYSTEMS 1/2 T. CAP., elec. chain hoist w/pendant control.

AIR COMPRESSORS(3) HUSKY PRO, 80 gal. tank, 7-1/2 HP motor, 175 max. PSI (one not in working condition).

CHILLER UNITHANKINSON, (common shared by the air compressors).

CIA MDL. KV40A-0MB CNC VERTICAL MACHINING CENTER

LEBLOND 16" HEAVY-DUTY ENGINE LATHE

PLANT CLOSING

GAFFEY 1/2 T. CAP. JIB CRANE

DAEWOO 6,000-LB. CAP. MDL. GC30S-2 FORKLIFT

HANDLING SYSTEMS 1/2 T. CAP. JIB CRANE

ABELL-HOWE 1 T. CAP. JIB CRANE

LOCATION AG&S MANUFACTURING

Hempstead, TexasONLINE AUCTION

HUSKY PRO AIR COMPRESSOR

CNC

3AVAILABLE

4 5

PLANT CLOSING

EAST HOUSTON, TEXASONLINE AUCTION LOCATION AG&S MANUFACTURING

900 Blassingame Road Hempstead, Texas 77445

INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

MAGNETIC PARTICLE INSPECTION MACHINEMAGWERKS MDL. PSAH-545 WET MAG-TYPE w/full enclosure, 4,000 watt output, 5,000 max. watt HW5000 for demaging, sgl. phase, 48" max. part length, S/N 070502.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENTSOFT JAWS; CARBIDE BORING BARS; CRYSTAL CLEAN TUB-TYPE PARTS WASHER; SMALL CHOP SAW; COMBINATION 6" BELT/12" DISC SANDER; DBL. END GRINDER; TOOLING; LOT OF Q.C.; TAPER TOOLHOLDERS; COLLETS; WORKBENCHES; ROTARY INDEXERS; VISES.

SALE DATE: BIDS START CLOSING ON THURSDAY, DECEMBER 15 • 10:00 A.M.

ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION.

Go to www.pmi-auction.com and click on

on our calendar page for this auction sale.

MAGWERKS MAGNETIC PARTICLE INSPECTION MACHINE

GAGEMAKER GAGE SETTING SYSTEM

4 5

CNC SLANT BED LATHESMTCL 20" X 21" MDL. HTC4554A, new 2007, Fanuc 0i-TC control, 20.47" sw. over bed, 12.59" sw. over cross slide, 17.71" max. cutting dia., 21.6" max. cut-ting length, 10.83" X-axis travel, 23.6" Z-axis travel, A2-8 spndl. nose, 3.15" spndl. bore, spndl. spds.: 30–3,000 RPM, 20 HP spndl. motor, 12-pos. turret, heavy-duty box ways, 2-spd. geared headstock, 12" 3-jaw hydraulic chuck, auto. tool presetter, coolant system, chip conveyor, programmable tailstock, set of tool holders. S/N GN12301305G (Video Available).

LOCATION BMAASS FLANGE CORPORATION

6202 Lumberdale Road, Houston, Texas 77092INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

LEHMANN HOLLOW SPINDLE LATHE

>BERTSCH

MECHANICAL INITIAL

PINCH PLATE ROLL

HOLLOW SPINDLE LATHELEHMANN 28" X 196", 12" hole thru spndl., 27.5" max. sw., 16" max. sw. over crosslide, spndl. spds.: 8–300 RPM, thds.: 5/8–36 TPI, fds.: .0055–.327 IPR, taper attach., rapid tra-verse, kick-out, thread dial, hard bed, tailstock, coolant, front and rear 24" dia. 4-jaw chucks.

MECHANICAL INITIAL PINCH PLATE ROLL

BERTSCH 8' X 15/32", 98" roll length, 19/32" cap. mild steel, 15/32" cap. boiler duty, 60,000 PSI max. tensile pipe cap., 15 HP main motor, 7.5 HP geared rear roll adj., air drop end, 12" dia. type position indicator, lower rolls grooved longitudinally.

LOCATION C: DIXIE CULLEN INTERESTS, INC.8501 East Freeway, Houston, Texas 77029 • INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

VERTICAL BORING MILLBETTS 10', (2) vert. heads, S/N N.A.

VERTICAL TURRET HEAD

VERTICAL BORING MILL

KING 62", 62" 4-jaw tbl., 66" max. sw., 45" max. ht. under rail, tbl. spds.: 1–123 RPM, fds.: .010–.500 IPR, 55 deg. ram swivel, 30 deg. turret swivel, 75 HP main motor, 5-pos. swivelling, turret head, 4-pos. swivelling ram head, side head, pendant controls, pwr. clamping, misc. turret tooling, pit required, electrical cabinet, transfer.

LOCATION EHOUSTON VALVE

& TESTING CO., INC.4807 Clinton Drive, Houston, Texas 77020

INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

LOCATION DGATES MACHINE TOOL & REPAIR

7102 Bissell Road, Manvel, Texas 77578INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

SEE PAGE 15 FOR LATE ADDITIONS TO THIS LOCATION

6 7

CHICAGO DREIS & KRUMP 200 T. CAP HYDRAULIC PRESSBRAKE

CINCINNATI 12' X 3/4" HYDRAULIC SHEAR

>BUFFALO

NO. 2 VERTICAL

ANGLE BENDING

ROLL

<BALDWIN 800 TO 1,200 T. CAP FORGING PRESS

<POLAMCO 6' X 19" RADIAL ARM DRILL

PILLAR INDUCTION BILLET HEATER

MARVEL SERIES MDL. V10A AUTOMATIC TILT FRAME VERTICAL BANDSAW

WIRELINE SETTING TOOLS

HYDRAULIC PRESSBRAKECHICAGO DREIS & KRUMP 200 T. CAP. MDL. 200F12, 14' overall, 12'-6" dist. btwn. housings, manual backgauge, lower die rail, light curtain safety device, 2-spd. hydraulics, S/N H1325.

HYDRAULIC SHEARCINCINNATI 12' X 3/4", pneu. lift ball tbl., front operated 48" pwr. backgauge w/indicator, S/N 41213.

RADIAL ARM DRILLPOLAMCO 6' X 19", #5 MT spndl., pwr. clamping and elevation, spds.: 30–1,700 RPM, S/N N.A.

VERTICAL ANGLE BENDING ROLLBUFFALO NO. 2, huge assortment of angle bending rolls, shims, spacers, pipe dies.

AUTOMATIC TILT FRAME VERTICAL BANDSAW

MARVEL SERIES MDL. V10A, auto. indexing feed, multi-cycle counter, out-of-stock switch, S/N D129910-W.

WIRELINE SETTING TOOLS(3) NUMBER 20, S/N CS-20-03, S/N CS-20-04, S/N CS-20-05.

(3) NUMBER 10, S/N CS-10-01, S/N CS-10-01, S/N CS-10-04.

APPLIED FREE POINT TOOLS(2) 11/16", S/N CS-FP-07, S/N CS-FP-08.

TEST CAPBOWEN 3" X 1/2" NPT.

INDUCTION BILLET HEATER

PILLAR, 1,000 KWA, 8" and 10" coils walking beam heats billets 2,400 deg. F. auto. .1–10" billet ev-ery 20 seconds, (10) extra coils, pwr. units, transformer.

FORGING PRESSBALDWIN 800 TO 1,200 T. CAP., dies for tool joints, API fracking elbows and swivels .60" stroke, 30" x 30" bed w/knockout, injec-tor system for high-spd. extrud-ing, 100,000-lbs. approx. weight.

LOCATION FINDUSTRIAL FABRICATORS

300 McBride Lane, Corpus Christi, Texas 78408INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

LOCATION GRSI

1900 Alaska Avenue, League City, Texas 77573INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

or by appointment, call George at (713) 542-3971

6 7

OKK MDL. MCV-520 CNC VERTICAL MACHINING CENTER

OKUMA 24" X 60" CNC LATHE

MORI SEIKI MDL. LB-7 CNC LATHE

HAAS MDL. SL-30 CNC LATHE

CNC VERTICAL MACHINING CENTERSOKK MDL. MCV-520, OKK Matic-G CNC control, 22" x 52" tbl. 30-pos. tool changer, (26) V-flange toolholders, S/N 342.OKK MDL. MCV-820, OKK Matic-G CNC control, 32" x 72" tbl., 60-pos. tool changer, (35) V-flange toolholders, S/N 205.OKK, OKK Matic-G CNC control, 32" x 78" tbl., 30-pos. tool changer, S/N 382.

CNC LATHESHAAS MDL. SL-30, new 2006, Haas CNC control, 12" dia. 3-jaw chuck, 8-pos. turret, 30 HP, 2-spd. gear drive, tailstock, assorted tooling, S/N 3075723.OKUMA 24" X 60" MDL. LH35-N, Okuma CNC control, 4-way toolpost, tailstock, assorted tooling, S/N 1602.MORI SEIKI APPROX. 40" X 120" MDL. LB-7, Fanuc 6T CNC controls, 4-way toolpost, tailstock, S/N 57.MAZAK APPROX. 20" X 24" MDL. QUICKTURN 20, Fanuc 10T CNC control, 8-pos. turret, S/N 63358.TAKISAWA MDL. DTX-3, 15" dia. 3-jaw chuck, 8-pos. turret, machine no. TLNN0226 (currently out of service).

LOCATION HNORTHEAST MACHINE

& TOOL CO.1402 Industrial Road, Mount Pleasant, Texas 75455

INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

PLANT CLOSING

>MAZAK 20" X 24"

CNC LATHE

>OKK

MDL. MCV-820 CNC VERTICAL

MACHINING CENTER

>OKK CNC VERTICAL

MACHINING CENTER

CNC

CNC

CNC

CNC

CNC

CNC

CNC

2006

8 9

CNC HORIZONTAL MACHINING CENTEROKK MDL. MCH800, OKK Matic-G CNC control, 31" x 31" indexing tbl., 80 tool changer, (18) assorted toolholders, S/N 232.

HORIZONTAL BORING MILLSGIDDINGS & LEWIS MDL. 350-T, 60" x 96" tbl., Anilam Wizard D.R.O., S/N 5978.CINCINNATI GILBERT, 53" x 78" tbl., Sargon D.R.O., Machine No. 552.CINCINNATI GILBERT, 43" x 65" tbl., Mitutoyo D.R.O., S/N N.A.GIDDINGS & LEWIS MDL. 340-F, 10' x 14' tbl., work risers, 13" x 56" x 30" ht., S/N 7415.CINCINNATI GILBERT, 43" x 62" tbl., Machine No. 112.

CINCINNATI GILBERT 53" X 78" HORIZONTAL BORING MILL

GIDDINGS & LEWIS MDL. 340-F HORIZONTAL BORING MILL

CINCINNATI GILBERT 43" X 62" HORIZONTAL BORING MILL

GIDDINGS & LEWIS MDL. 350-T HORIZONTAL BORING MILL

OKK MDL. MCH800 CNC HORIZONTAL MACHINING CENTER

CINCINNATI GILBERT 43" X 65" HORIZONTAL BORING MILL

LOCATION H, continuedNORTHEAST MACHINE & TOOL CO.

1402 Industrial Road, Mount Pleasant, Texas 75455INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

PLANT CLOSING

CNC

8 9

ENGINE LATHESSUMMIT 30" X 96", 4" spndl. hole, steadyrest, Q.C. toolpost w/assorted toolholders, S/N N.A.MONARCH 24" X 54".MONARCH 26" X 168" MDL. 20, followrest, Q.C. toolpost, 24" dia. 4-jaw chuck, S/N 35750.TOS 32" X 190" MDL. SUS80, 4-way toolpost, steadyrest, 30" dia. 4-jaw chuck, S/N N.A.LANG, approx. 52" sw. x 15" in gap, approx. 32" x 144" centers outside gap, 36" dia. 4-jaw chuck, tailstock, S/N N.A.MONARCH 22" X 72" MDL. 16, Q.C. toolpost, 15" dia. 4-jaw chuck, tail-stock, S/N N.A.MONARCH 18" X 54" MDL. 16, Q.C. toolpost, tailstock, 15" dia. 4-jaw chuck, S/N 35862.

GAP BED ENGINE LATHESOLDFIELD & SCHOFIELD, approx. 66" sw. x 20" in gap, 20" sw. x 120" centers outside gap, tailstock, steadyrest, 64" T-slotted faceplate.CADILLAC, approx. 62" x 10" in gap, 40" x 80" outside gap, 30" dia. 4-jaw chuck, Q.C. toolpost, tailstock, followrest.

HORIZONTAL MILLSCINCINNATI, S/N 2A3PIK.CINCINNATI, 20" x 84" tbl.

RADIAL ARM DRILLSSOYT APPROX. 44" X 60", S/N Z3050X16.

>MONARCH

22" X 72" ENGINE

LATHE

<TOS 32" X 190" ENGINE LATHE

<CINCINNATI VERTICAL MILL

>LANGE

ENGINE LATHE

>SSOYT

APPROX. 44" X 60"

RADIAL ARM DRILL

MONARCH 26" X 168" ENGINE LATHE

CADILLAC GAP BED ENGINE LATHE

CINCINNATI HORIZONTAL MILL

10 11

VERTICAL MILLSLAGUN MDL. FTV-4, 11" x 58" tbl., #40 Quick Switch spndl., Accu-Rite D.R.O.

LAGUN MDL. FTV-F3-L, 11" x 58" tbl., R-8 spndl., Y-axis pwr. feed only.

BRIDGEPORT SERIES T J-HEAD, 9" x 42" tbl., R-8 spndl., 6" swivel base vise, no pwr. feed.

CINCINNATI MILACRON, 16" x 80" tbl., Cincinnati Accra-Matic push button controls, Machine No. 420-16.

CINCINNATI, 20" x 94" tbl.

KEYSEATERSMITTS & MERRILL MDL. 3A-HYD, assorted tooling and cutters, S/N G27426.

HANSFORD MDL. 5, S/N 5-1372.

GRINDERSOKAMOTO MDL. DIVRS SURFACE GRINDER, 12" x 24" magnetic chuck, S/N 7956864X.

TOS MDL. BRH-40B SURFACE GRINDER, 15" x 58" magnetic chuck, Machine No. 600-905.

OERLIKON MATTISON MDL. ROTARY-Z4 GRINDER, 36" magnetic chuck, S/N EV-24-0608.

O.D. GRINDER, approx. 6" dia. x 40" center, Machine No. 1432A.

STANDARD MDL. SPY-TYPE 10C-TDY TOOL GRINDER, S/N 50041.

MOHAWK MDL. 100 DRILL GRINDER, S/N 288.

OKAMOTO MDL. DIVRS SURFACE GRINDER MOHAWK MDL. 100 DRILL GRINDER OERLIKON MATTISON MDL. ROTARY-Z4 GRINDER

TOS MDL. BRH-40B SURFACE GRINDERO.D. GRINDER

LOCATION H, continued

Mount Pleasant, Texas

CINCINNATI MILACRON VERTICAL MILL

CINCINNATI HORIZONTAL MILL

LAGUN MDL. FTV-4 VERTICAL MILL

MITTS & MERRILL MDL. 3A-HYD KEYSEATER

10 11

SAWKYSOR JOHNSON AUTO-MATIC MDL. HA-400, 1-1/4" blade, 16" rds., 16" flats, S/N 402862.

PIPE THREADEROSTER, Machine No. 655.

PEDESTAL DRILL PRESSROCKWELL SERIES 15-665.

WELDING MACHINESMILLER MDL. MP-65E WELDER, Miller 60 Series wire feeder (no leads).AIRCO MDL. CV-600 WELDER (no leads).MILLER DELTAWELD MDL. 451 WELDER, Miller 60 Series wire feed.(2) LINCOLN IDEALARC MDL. TM4001400 ARC WELDERS (no leads).MILLER TIG/RIG WELDER.LINCOLN IDEALARC MDL. 250 ARC WELDER.MILLER MDL. CP200 WIRE WELDER, Miller Millermatic 10A wire feeder.

MANIPULATORS & ACCESSORIESARONSON LOCUST MANIPULATOR; WELDING WIRE AND RODS.

PLASMA CUTTERAIRCO MDL. 4805, approx. 48" x 48", HL-8 Linatrol.

PARTS MACHINESNORGON O.D. GRINDER; (2) OKK VERT. CNC MILLS; MORI SEIKI TL-5; CIN-CINNATI HORIZ. MILL; PEDESTAL TOOL GRINDER; OKK MACHINING CEN-TER; CINCINNATI HORIZ. MILL; SURFACE GRINDER; ENGINE LATHE; BOR-ING MILL ATTACHS.; MISC. MACHINE PARTS.

ROTARY SCREW AIR COMPRESSORSULLAIR MDL. 1509E/A, ISO 9001, 17,701 H.O.M., S/N 20070220061.

AIR COMPRESSORCHAMPION, 15 HP motor, 120 gal. tank, 220/460, 3-phase.

PORTABLE AIR COMPRESSORKOBALT, 1 HP motor, 20 gal. tank, 150 max. PSI.

OSTER PIPE THREADER

MILLER DELTAWELD MDL. 451 WELDING MACHINE

MILLER DELTAWELD MDL. 451 WELDING MACHINE

KYSER JOHNSON AUTO-MATIC MDL. HA-400 SAWARONSON LOCUST MANIPULATOR AIRCO MDL. 4805 PLASMA CUTTER

MILLER MDL. MP-65E WELDING MACHINE ARONSON LOCUST MANIPULATOR SULLAIR ROTARY SCREW AIR COMPRESSOR

SULLAIR ROTARY SCREW AIR COMPRESSOR

WRIGHT SELF DUMPING HOPPER

ROCKWELL SERIES 15-665 PEDESTAL DRILL PRESS

SALE DATE: BIDS START CLOSING ON THURSDAY, DECEMBER 15 • 10:00 A.M.

12 13

LOT OF V-BLOCKS KURT 6" MACHINE VISE

PORTABLE CYCLONE SANDBLASTER

HUGE AUCTIONPLANT

CLOSING

F&G INDUSTRIES 10 T. X APPROX. 50' SPAN OVERHEAD BRIDGE CRANE 1/2 T. X 12' JIB CRANE

KOMATSU 5,000-LB. CAP. FORKLIFT

HYSTER 10,000-LB. CAP. FORKLIFT

CUSTOM METAL ROLL

MAXX AIR 36" PORTABLE SHOP FANS 8" HORIZONTAL/VERTICAL SUPER SPACER

>ROLL-IN

BANDSAW

OVERHEAD BRIDGE CRANESF&G INDUSTRIES 10 T. X APPROX. 50' SPAN MDL. CR3795, top running, Shaw-Box 10 T. cap. hoist (bridge and hoist only).SECO APPROX. 46' SPAN MDL. 3474, top running, Detroit 3 T. elec. hoist (bridge and hoist only).SECO 5 T. X APPROX. 40' SPAN, bottom running, Detroit 5 T. cap. hoist (bridge and hoist only).

JIB CRANESAPPROX. 12' ARM, 1/2 T. cap. elec. chain hoist.APPROX. 12' ARM, 1/2 T. cap. chain hoist.APPROX. 16' ARM, 1/2 T. cap. chain hoist.

FORKLIFTSKOMATSU 5,000-LB. CAP. MDL. FC250-11, gas engine, 130" lift ht., 5,270 H.O.M., S/N 469212A.KOMATSU 10,000-LB. CAP. MDL. SPACESAVER 100, 130" lift ht.

MISCELLANEOUS MATERIAL HANDLING EQUIPMENTHITACHI 1/2 T. CAP. ELECTRIC CHAIN HOIST; WRIGHT 1/2 CU. YD. SELF-DUMPING HOPPERS; (3) WRIGHT 1/3 CU. YD. SELF-DUMPING HOPPERS; STEEL BANDING w/tools and ratchet chain boomer.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENTPYM 8" MACHINE VISE; (5) KURT 6" MACHINE VISES; 12" AND 8" HORZ./VERT. SUPER SPACERS; 7" X 12" X 8" HT. V-BLOCK (one pair); 4" X 8" X 5-1/2" HT. V-BLOCK (two pair); (2) MAXX AIR 36" PORTABLE SHOP FANS; ROLL-IN BANDSAW; CUSTOM APPROX. 4" ROLLS X 4'W METAL ROLL; (3) 2" x 48" BELT SANDERS,(1) on stand and (2) bench mtd.; 8" BENCH GRINDER; 6" BENCH GRINDER; PORTA-BLE CYCLONE SANDBLASTER; 8" PEDESTAL GRINDER; OXY./ACY. CART w/torch and gauges; SKIL 10" COMPOUND MITER SAW.

LOCATION H, continuedNORTHEAST MACHINE & TOOL CO.

1402 Industrial Road, Mount Pleasant, Texas 75455INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

12 13

GOOSENECK TRAILERAMERITRAIL MDL. GN40-20ED42, 24,000-lb. cap., 40'L. x 8'W., wood deck, stake pockets, dual-axle, bail in winch and landing gear, rear ramps, VIN 17YGN40 23-1 B021952.

FORKLIFTCLARK 8,000-LB. CAP., diesel engine, 2-stage mast, 4' forks, solid rubber tires, 8,062 H.O.M., S/N Y685-325-4475.

PLASMA CUTTERLINCOLN ELECTRIC MDL. VIPER, 480 v., S/N U1010820956.

BATTERY CHARGERSCHUMACHER ELECTRIC, 200 amp engine start, 2 amp slow charge.

ARC WELDERS(2) LINCOLN ELECTRIC AC/DC, 225/125.

TRUCK TOOL BOX COMBO CRAFTSMAN HEADACHE RACK, large tool box, small side box, S/N N.A.

SAND BLAST POTPNEUMATIC SAND BLAST POT w/hose.

AMERITRAIL GOOSENECK TRAILER

LOCATION IINTERNATIONAL ENVIRONMENTAL

EQUIPMENT CO.3330 County Road 56, Building C, Rosharon, Texas 77583

INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

LARGE CAPACITY YARD-TYPE FORKLIFT

HYSTER 46,000-LB. CAP. MDL. H460B, 314 H.O.M. since rebuild, 15' mast, diesel engine, 46,000-lb. cap. @ 48" L.C., S/N B8P-2082B

RIGGING STYLE FORKLIFTSLOWRY 22,000-LB. CAP. MDL. L220RS, new 2001, 10' mast, LPG, 22,000-lb. cap. @ 24" L.C., 2,080 H.O.M., S/N L2206540202.HOIST 18,000-LB. CAP. MDL. F180, new 2000, 10' mast, LPG, 18,000-lb. cap. @ 24" L.C., 205 H.O.M., S/N 21650.

HYSTER 46,000-LB. CAP. YARD-TYPE FORKLIFT

LOWRY 22,000-LB. CAP. RIGGING STYLE FORKLIFT

HOIST 18,000-LB. CAP. RIGGING STYLE FORKLIFT

LOCATION JNAEGELI TRANSPORTATION

7201 Easthaven Blvd., Houston, Texas 77017INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

LINCOLN ELECTRIC MDL. VIPER

CRAFTSMAN TRUCK TOOL BOX COMBO

<SCHUMACHER ELECTRIC BATTERY CHARGER

>CLARK

8,000-LB. CAP. FORKLIFT

2001

2000

314 HRS

.

SINCE

REBUILD

14 15

FORKLIFTSTOYOTA 17,500-LB. CAP. MDL. 8FD80U, new 2014, diesel engine, 132" standard mast, dual drive pneu. tires, 355 H.O.M., S/N 10241.TOYOTA 10,000-LB. CAP. MDL. 7FGCU45-BCS, new 2004, LPG engine, 87/199 triple mast side shift, cushion tires, S/N 62303.MITSUBISHI 5,000-LB. CAP. MDL. FGC25K, new 2003, LPG engine, 83/188 triple mast side shift, cush-ion tires, S/N AF82D01530.MITSUBISHI 5,000-LB. CAP. MDL. FGC25N, new 2004, LPG engine, 87/199 triple mast side shift, cush-ion tires, S/N AF82F00897.

TOYOTA 5,000-LB. CAP. MDL. 8FGCU25, new 2012, LPG engine, 83/189 triple mast side shift, cushion tires, 4,441 H.O.M., S/N 40727.HYUNDAI 5,000-LB. CAP. MDL. HLF25C-11, new 2005, LPG engine, 89/197 triple mast side shift, cushion tires, S/N HC4012246.YALE 5,000-LB. CAP. MDL. GLC050, new 2003, LPG engine, 84/240 quad. mast side shift, cushion tires, S/N E187V19937A.

TELESCOPING BOOM MANLIFTS

JLG MDL. 600S, new 2002, 60' 3-section boom lift, Duetz 4-cyl. diesel engine, pwr. to platform, 4,888 H.O.M., S/N 300063981.GENIE MDL. S40, new 1998, 40' 2-section boom lift, Ford 4-cyl. LPG engine, pwr. to platform, 5,783 H.O.M., S/N 3082.

LOCATION KDALLAS AREA STORAGE FACILITY

2120 North Loop 12, Irving, Texas 75061INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

JLG 600S TELESCOPING BOOM MANLIFT

TOYOTA 10,000-LB. CAP. FORKLIFTTOYOTA 17,500-LB. CAP. FORKLIFT

MITSUBISHI 5,000-LB. CAP. FORKLIFT HYUNDAI 5,000-LB. CAP. FORKLIFT TOYOTA 5,000-LB. CAP. FORKLIFT

LOCATION LALECRIANT GROUP

5946 Ridgedale Drive, Houston, Texas 77039

INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

VERTICAL TURRET LATHESSCHEISS 42", 4-jaw tbl., 52" max. swing, 44" under rail, 30 HP 3-phase main motor, over all dimensions: 13'H x 8'W x 8'L, 45,000-lb. weight.SCHEISS 48", 4-jaw tbl., 54" max. swing, 44" under rail, 20 HP 3-phase motor, over all approx. dimensions: 13'H x 8'W x 8'L, 50,000-lb. weight.

2014

2004

2002

20122005

2003

<SCHEISS 42" VERTICAL TURRET LATHE

>SCHEISS 48"

VERTICAL TURRET LATHE

355 H.O.M.

14 15

VERTICAL BORING MILL42" BULLARD CUTMASTER, 42' plain tbl., 5-pos. pwr. turret, spds.: 5.5–200 RPM, side head w/4-pos. turret, 30 HP main drive motor, S/N 27355.

CNC SLANT BED LATHEMORI SEIKI MDL. LL-7, Fanuc 6TB CNC control, 42.9" sw. over bed, 20.4" swing over cross slide, 6.75" hole through spndl., 31.5" dia. chuck, 50 HP motor, spndl. spds.: 6–1,150 RPM, (2) 4-pos. turrets, chip conveyor, splash guards and doors, S/N 150.

JUST ADDED TO LOCATION C

SHOP SUPPORT EQUIPMENT

MILLER WELDING POWER UNIT, 750 amp.AIRCO WELDING POWER UNIT, 750 amp.KLEIBER & SHULTZ WET GRIT BLAST, 10'W x 11'L x 10'H, S/N 132.GIDDINGS & LEWIS BIT SHARPENER, S/N 940-0294-94.LOADING DOCK, 79"W x 88'L.

MACHINE TOOLSKEARNEY & TRECKER MILLING MACHINE, 10 HP-3Ch, S/N 2-7280.DeFUME VERTICAL BORING MILL MDL. KNA 110/135S, NR FABR 7854.K. MARTIN LATHE MDL. DLZ603, KOM. no. 17218, APP. no. 13893.SUMMIT RAM V2 MILLING MACHINE.

750 AMP WELDING POWER UNITS

KLEIBER & SCHULTZ 11'L X 10'H WET GRIT BLAST 79"W X 88"L LOADING DOCK GIDDINGS & LEWIS BIT SHARPENER

GIDDINGS & LEWIS BIT SHARPENER

BULLARD CUTMASTER 42" VERTICAL TURRET LATHE

EAST HOUSTON, TEXASONLINE AUCTIONLOCATION MUNIFORM COMPONENTS CO.

10703 Sheldon Road, Houston, Texas 77044

INSPECTION: Wednesday, December 14, 9:00 A.M. to 4:00 P.M.

SALE DATE: BIDS START CLOSING ON THURSDAY, DECEMBER 15 • 10:00 A.M.

ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION.

Go to www.pmi-auction.com and click on on our calendar page for this auction sale.

MORI SEIKI MDL. LL-7 CNC SLANT BED LATHE

CNC

DIXIE CULLEN INTERESTS, INC.

Houston, TexasSee page 5 for more details.

QS-0035216

GO TO OUR WEBSITE CALENDAR AT WWW.PMI-AUCTION.COM FOR THE LINK TO THE BIDSPOTTER CATALOG.

TERMS & CONDITIONS OF ON-LINE AUCTION SALEAn 18% Buyer’s Premium will apply.A 100% refundable $3,000 (US bidders) or $10,000 (foreign bidders) deposit is required for all webcast bidding unless prior approval has been obtained from the auction company.ALL BIDS ARE MADE AND RECEIVED UNDER THE TERMS HEREINAFTER SET FORTH TO WHICH TERMS BIDDERS AGREE BY MAKING THEIR BID AT THE SALE. THESE TERMS CANNOT BE ALTERED EXCEPT BY THE AUCTIONEER. NO EMPLOYEE HAS AUTHORITY TO MODIFY SAME. THE OWNER AND/OR AUCTIONEER RESERVE THE RIGHT TO ADD TO OR MODIFY THE TERMS OF THE SALES.All payments must be made by Cash, Cashier’s Check, Wire Transfer or Company Check with Bank Letter of Guarantee to Plant & Machinery, Inc. (PMI). Here is an example of what your letter should be: [Mr. “Customer Name” representing “Company Name” is a cus-tomer of this bank. This bank will guarantee unqualified payment to Plant & Machinery, Inc. on the account listed herein up to the amount of $________ . This letter is good until January 13, 2017.]All bidders are required to give full name, company name, address, phone, fax, email address, and bank information when registering. All bidders must register before bidding.All bids must be paid in full within two business days after the bids have closed. The Auctioneer shall determine the bidding incre-ments. Some items may be auctioned with reserve.All purchases must be removed within two weeks after the bids have closed, or, within the timeframe posted on the sale web page. No lot can, on any account, be removed prior to PMI having been paid in full. Removal shall be at the expense, risk and liability of the Purchaser. Purchases will be delivered only on presentation of paid bill. Auctioneer shall not be responsible for goods not removed within the aforesaid time.Riggers, movers, electricians or buyer performing work at the Auction Sites must provide Auctioneer with evidence of insurance. The insurance coverage must be at a level acceptable to Auctioneer and to the Seller.All checks for deposits and balances due shall be payable to the order of PLANT & MACHINERY, INC. unless instructed otherwise. All bills must be paid to the Houston headquarters offices of the Auctioneer at 1304 Langham Creek Drive, Suite 454, Houston, TX, 77084 or by wire transfer directly to the bank specified in the wire transfer instructions provided for this on-line auction. The full pur-chase price on all lots sold to the same buyer must be paid within the time fixed and before removal of any of the goods.

THE AUCTIONEER SHALL NOT BE RESPONSIBLE FOR THE CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN CONNECTION THEREWITH. NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS, ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD “AS IS” AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM.Articles purchased may not incorporate approved activating mecha-nisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is Purchaser’s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation.Purchaser agrees to indemnify and hold Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA re-quirements, or for proximate or consequential damages, costs or legal expenses arising therefrom.No claims will be allowed after removal of goods from premises.Auctioneer shall not, in any event, be liable for non-delivery or any other matter or thing, to any Purchaser of any lot other than for the return to the Purchaser of the deposit or sum paid on said lot, should the Purchaser be entitled thereto.In default of payment of bills in full within the time therein speci-fied, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of re-sale, will be charged to the defaulting Purchaser.Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefor. Neither the Auctioneer nor his principal shall be liable by reason of defect in or condition of the premises on which the sale is held.The Auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also re-

serves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of a Seller will be served, the Auctioneer reserves the right to sell all the property listed, in bulk.Where items are sold by estimated weight, count or measure, the Purchaser will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any shortage exists, the Purchaser will receive a refund at the rate of purchase. If there be an excess, the Purchaser will be required to pay for such excess, at the rate of purchase.Reserve: There are RESERVE amounts attached to selected items in this auction. When bidding, you will be notified by the online bidding system as to whether or not you have met the RESERVE amount. No bid will be considered a winning bid unless the RESERVE amount has been met. A bid in the amount of the RESERVE, or higher, will be considered a winning bid. Please check your bid and bid status before the Lot closes.The Auctioneer reserves the right to reject any and all bids, alter the order of sale, and accept bids made on behalf of the Seller.The record of sale kept by the Auctioneer will be taken as final in the event of any dispute.The Auctioneer is acting as agent only and is not responsible for the acts of its principals. Purchaser acknowledges, as an inducement to Seller to commit Purchaser to bid, that Purchaser has independently inspected the goods bid upon by the Purchaser, and acknowledges to the Seller that Purchaser is acquiring all goods “AS IS, WITH ALL FAULTS” and “WITH REMOVAL AT PURCHASERS’ RISK AND EXPENSE” and agrees to protect, indemnify and hold harmless the Seller from any and all claims, demands, causes of actions, liabili-ties and judgments relating to the conditions or use of the goods.Seller, if not the same as the Auctioneer, shall have the rights, pro-tections and benefits afforded to the Auctioneer as set forth herein.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspec-tion prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.ANY ADDITIONAL PROVISIONS OR AMENDMENTS TO THE ABOVE LISTED TERMS WILL BE POSTED TO THE ON-LINE SALE WEB PAGE BY THE AUCTIONEER PRIOR TO THE START OF BIDDING.

SALE DATE: BIDS START CLOSING ON THURSDAY, DECEMBER 15 • 10:00 A.M.

18% BUYER’S PREMIUM

WILL APPLY

INSPECTION: Wednesday, December 14 9:00 A.M. to 4:00 P.M.

or by appointment.

HUGE ONLINE AUCTION(12) LOCATIONS IN TEXAS: CORPUS CHRISTI, HOUSTON AREA,

MT. PLEASANT & CENTRAL TEXAS

ONLINE AUCTION