ONE DAY WORKSHOP WITH S.K. GHOSH - Tarumanagara...
1
Concept and Application of Seismic-Resistant Structure Design According to The Latest IBC, ASCE, and ACI ONE DAY WORKSHOP WITH S.K. GHOSH ABOUT Dr. S.K. GHOSH., F.ASCE, F.SEI. Dr. S. K. Ghosh is known internationally for his work in earthquake engineering. He has influenced seismic design provisions in the United States for many years. Dr. Ghosh is active on many national technical committees and is a fellow of ASCE, SEI, ACI, and PCI. He is a member of ACI Committee 318, Standard Building Code, and the ASCE 7 Standard Committee (Minimum Design Loads for Buildings and Other Structures). He is a former member of the Boards of Direction of the Building Seismic Safety Council (BSSC), the American Concrete Institute (ACI), and the Earthquake Engineering Research Institute (EERI). 18 July 2019 M Building 8th Floor Universitas Tarumanagara Jakarta, Indonesia [email protected] www.iccim.untar.ac.id +62 817 6869 150 (Vito) +62 857 1052 1360 (Yenny) REGISTRATION PROCEDURE Registration fee is IDR 2.000.000 and only accepted through bank transfer Bank Central Asia (BCA) Account No. 4835411100 Arianti Sutandi, M.Eng, Ir. LIMITED TO 100 PARTICIPANTS ASCE 7-16, for the first time, has introduced a vertical ground motion spectrum but explicitly requires its use in the seismic design only of “tanks, vessels, hanging structures and non-building structures incorporating horizontal cantilevers.” This workshop will elaborate on: Determination whether explicit consideration of vertical earthquake ground motion should be required for certain structures. Review of the treatment of vertical earthquake motion in the seismic design of structures in U.S. Codes, standards, resource documents, and Eurocode 8. Highlights from a literature review featuring vertical earthquake and its potential impact on structural design. Identification of the sensitivity of structures and structural members to the consideration of vertical earthquake ground motion. Proposal for an interim measure in the seismic design of structures due to the absence of detailed studies to investigate the adequacy of the code-specified design force of 0.2SDSD for structural members subjected to vertical ground motion. Consideration of Vertical Earthquake Ground Motion in the Seismic Design of Structures Organized by: Civil Engineering Undergraduate Study Program, Universitas Tarumanagara Please register at bit.ly/2IQSx2P or by scanning the QR Code after completing the payment
Transcript of ONE DAY WORKSHOP WITH S.K. GHOSH - Tarumanagara...
Concept and Application of Seismic-ResistantStructure Design According to The Latest IBC,ASCE, and ACI
ONE DAY WORKSHOP WITH S.K. GHOSH
ABOUT Dr. S.K. GHOSH., F.ASCE, F.SEI.Dr. S. K. Ghosh is known internationally for his work in earthquake engineering. He has influenced seismic design provisions in the United States for many years. Dr. Ghosh is active on many national technical committees and is a fellow of ASCE, SEI, ACI, and PCI. He is a member of ACI Committee 318, Standard Building Code, and the ASCE 7 Standard Committee (Minimum Design Loads for Buildings and Other Structures). He is a former member of the Boards of Direction of the Building Seismic Safety Council (BSSC), the American Concrete Institute (ACI), and the Earthquake Engineering Research Institute (EERI).
18 July 2019M Building 8th Floor
Universitas TarumanagaraJakarta, Indonesia
www.iccim.untar.ac.id
+62 817 6869 150 (Vito) +62 857 1052 1360 (Yenny)
REGISTRATION PROCEDURERegistration fee is IDR 2.000.000 and only accepted through bank transferBank Central Asia (BCA)Account No. 4835411100Arianti Sutandi, M.Eng, Ir.
LIMITED TO 100
PARTICIPANTS
ASCE 7-16, for the first time, has introduced a vertical ground motion spectrum but explicitly requires its use in the seismic design only of “tanks, vessels, hanging structures and non-building structures incorporating horizontal cantilevers.”This workshop will elaborate on:Determination whether explicit consideration of vertical earthquake ground motion should be required for certain structures.Review of the treatment of vertical earthquake motion in the seismic design of structures in U.S. Codes, standards, resource documents, and Eurocode 8.Highlights from a literature review featuring vertical earthquake and its potential impact on structural design.Identification of the sensitivity of structures and structural members to the consideration of vertical earthquake ground motion.Proposal for an interim measure in the seismic design of structures due to the absence of detailed studies to investigate the adequacy of the code-specified design force of 0.2SDSD for structural members subjected to vertical ground motion.
Consideration of Vertical Earthquake Ground Motion in the Seismic Design of Structures
Organized by: Civil Engineering Undergraduate Study Program, Universitas Tarumanagara
Please register at bit.ly/2IQSx2P or by scanning the QR Code after completing the payment
