OKYANUS SUPER WDR 290 ˘ ˇ˘ˆ car... · 2.50 m. It yields best washing results for small cars,...

Alkone Co,Ltd المحدودة للتجھيزات النموذجية الكون شركة 00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

http://www.magicromesystems.com/ [email protected] Saudi Arabia Jeddah 966126687424 فاكس 966122062607 المعرض 9665646 المعرض مدير 966591008032 تليفون

OKYANUS SUPER WDR 290 مغاسل سيارات اتوماتيكية

AUTOMATIC CAR WASH & DRY MACHINES

OKYANUS Super WDR 290 Model Three Brush Machine is a Swinging brush system which washes vehicles with max heights of 2.90 m, max width of 2.50 m. It yields best

washing results for small cars, jeep as well as for vans. This Machine, brush washes with

shampoo and rinses the vehicle while moving over the vehicle two times. For WD Models, the machine is washing with shampoo or foam in the first run and when coming

back over the vehicle it adds rinsing aid wax and start to dry by following the vehicle

profile and fixed 2 side dryer fans. Therefore in drying operations, higher efficiency is

provided with low speed of gantry. For the WDR Models, 100 bar high pressure pre-wash (Robowash)will act before the brush washing starts in order to pre clean the

wheels, rims and the undersides of the vehicles from mud and dirt.

There is a Counter on the panel, which counts the number of vehicles that have been

washed. The metal structure made of first grade steel sheets is hot dip galvanized, phosphate

coated and baked after electrostatic powder painted. The operations of the machine are

programmed on the inboard PLC computer. Galvanized and electrostatic powder painted sheet steel cladding, Venturi for Chemical Dosing and emergency stop button are standard.

The gantry drive motors work with Inverter system, so the start and stop of machine is

very soft. This also prolongs the motor and the gear life. With electronically controlled top

brushes, sensitive and controlled pressure on the surface of the vehicle is obtained. The

vertical brushes of OKYANUS Automatic Car Wash Machines are designed in trolley controlled swing system and all the profiles of the vehicles can be washed perfectly and

safely. Machine can be equipped with all the optional accessories stated below. The ease

and low cost maintenance requirement of this machine is the reason for the high demand.

The machine can be equipped with all the optional accessories stated below.

MODEL OPERATION OPERATION TIME (MIN)

WASHING WIDTH

WASHING HEIGHT

NET FOBJEDDAH PRICE (SR)

OKYANUS SUPER WDR 290 WASH + DRY + ROBOWASH

5.5 - 6 250 cm 290 cm 270000

OKYANUS SUPER WDR 290 STANDARD ACCESSORIES Inverter controlled Gantry Drive Motor INCLUDED

Pumps for Chemical Dosing (Shampoo and Wax) INCLUDED

Galvanised and Painted Steel Clading (Front) INCLUDED

Electronically-controlled Combination of swing and Trolley movement 2 Vertical and 1 Top Brushes

INCLUDED

Emergency Stop Button INCLUDED


000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000


Counter INCLUDED

Polycarbon Water Splash Guards INCLUDED

Wheel Guide INCLUDED

Wax Arch INCLUDED Contour following top Dryer and 2 fixed side dryer fans INCLUDED

Chasis Wash (pump and hoses excluded) INCLUDED

Robowash (80-100 bars) high Pressure Sill Wash (pump included, hoses excluded) INCLUDED

Traffic Light INCLUDED Diagnostic Panel (Showing Failures and remedies, showing washing numbers, make adjustements for brush pressure control)

INCLUDED

Hydro Wash DR 260 Touch Free Automatic Washer

Our HYDROWASH DR 260 is a touch free Machine which

washes vehicles with max heights of 2.60 m and max width of

2.50 m. It yields best washing results for small cars, jeep as well as for vans. This Machine,

applies emollient softener + shampoo foam and rinse washes the vehicle with 100 bar

high pressure while moving over the vehicle two times. The machine is washing with

emollient and shampoo foam in the first two run cycles and it adds drying aid wax to the

rinse water and start to dry by following the vehicle profile. Therefore in drying operations,

higher efficiency is provided with low speed of gantry.

There is a Counter on the panel, which counts the number of vehicles that have been

washed. The metal structure made of first grade steel sheets is hot dip galvanized,

phosphate coated and baked after electrostatic powder painted. The operations of the

machine are programmed on the inboard PLC computer. Fiberglass top front cladding, Pump for Chemical Dosing and emergency stop buttons are standard. The gantry drive

motors work with Inverter system, so the start and stop of machine is very soft. This

also prolongs the motor and the gear life. The HYDROWASH Automatic Touchless Car Wash Machines are designed for touch free (brushless) wash and all the profiles of the vehicles can be washed perfectly and safely. The machine can be equipped with all the

optional accessories stated below.


000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000


MODEL OPERATION OPERATION TIME (MIN)

WASHING WIDTH (cm)

WASHING HEIGHT (cm)

NET EX-WORKS SA-Jed PRICE

(SR)

HYDROWASH DR 260

BRUSHLESS HIGH PRESSURE WASH+ DRY

4-8 250 260 230000SR

HYDROWASH DR 260 STANDARD EQUIPMENTS Rinsing Arch INCLUDED

Inverter controlled Gantry Drive Motor INCLUDED

3 Pumps for Chemical Dosing INCLUDED

Robowash Sides and the top (100 Bar piston pump included) INCLUDED

Wheel Guide INCLUDED

Counter INCLUDED

Emergency Stop Button INCLUDED

Galvanised and Painted Steel Clading (Front) INCLUDED

Polycarbonate Water Splash Guards INCLUDED Contour following top Dryer and 2 fixed side dryer fans INCLUDED

Chasis Wash (pump and hoses excluded) INCLUDED

Traffic Light INCLUDED Diagnostic Panel (Showing Failures and remedies, showing washing numbers, make adjustements for brush pressure control)

INCLUDED

BF VEHICLE WASHING MACHINES OPTIONAL ACCESSORIES WITH ADDITIONAL COST

DBF AUTOMATIC VEHICLE WASHING MACHINES ADDITIONAL EQUIPMENT AND ACCESSORIES

NET EX-WORKS PRICE LIST (USD) Polyethylene Tank ( 5 ton ) 12200

Hydrophore Pump (70 lt /min – 5 bar) 12500 Compressor 13000 HIGH PRESSURE WASHING MACHINE 14800

Decorative Polyester Cladding ( front) 10900

SPRAY FOAM MACHINE(60 Lt) 5000 Separate Wax Arch 10200 Water Softening Equipment (For 20-40 Fr water level) 30000

Note: For the operation of the machine, it is necessary to have Compressor, Hydropower

Pump to be connected to a water tank. Besides, it is advisable for you to buy additionally the

Diagnostic Panel for ease of solving problems on the machine from long distance.

COMPRESSOR FOAM TANK AND SPRAY GUN PRESSURE WASHING MACHINE


000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000


VACUUM CLEANER DIAGNOSTIC PANEL WATER TANK WATER SOFTENING

ROBOWASH HIGH PRESSURE SILL WASH CHASIS WASH HYDROPHORE PUMP

DBF AUTOMATIC WASHING SYSTEMS

DESCRIPTION DEVICES BRAND/MODEL

- Power Transmission Components

* Electric Motors

* Gear Boxes

Watt, Abana

Bonfinglioli, Motoravio, Hydromec,STM

Motovario, Bonfiglioli, Hydromec


000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000


- Electrical and Automation Equipment

* Power Supply

* Inverter (Speed Controls)

* Soft Starters

* Thermal Magnetic Switches

* Contactor

* Proximity Switch

* Termal Contacts

* Photocell

Telemecanique

Telemecanique

Telemecanique

Telemecanique

Telemecanique

Telemecanique

Phoenix Contact

Carlo Gavazzi, Telemecanique

Comadan

Siemens,Delta,Schneider

Camozzi, Metal Work, Burkert

-Water Installation and Pumping Equipment

* Circulation Pumps

* High Pressure Pumps

* Chemical Dosing System

* Foam Making Equipment

Grunfos, Standard Pompa,DAB

Interpump,Annovi Reverberi

Dosatron, Suttner

Suttner

Tecsi, Lechler, Spraying Systems

Suttner - Brushing Groups

*All Brush Components

Favagrossa

-Pneumatic Supplies

* Pneumatic Control and Control Systems

and Equipment

Chelic, Metal Work

In the main construction of all the machines, at least 3 mm sheet metal is used. After Laser cutting, CNC press brake bending the structure is gas shield welded.

Then the structure is hot dip galvanized, phosphate coated and painted with electrostatic powder paint and baked in oven.

GENERAL CONDITIONS :

1- PAYMENT TERMS: %80 down payment together with the contract and 20% remaining value

payment will be done one weeks before the shipment.


000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000


2- DELIVERY TERMS: The goods will begin to be delivered from OUR WAREHOUSE in JEDDAH

in maximum 14 weeks from the receival date of the acceptable payment.

3- INSTALLATION PERIOD: The installation of the machine normally will take maximum 2

weeks if all preparations before installation are done according to specifications and drawing to

be supplied by us.

4- RESPONSIBILITIES OF THE SUPPLIER

* Will send the Foundation Plan for the installation.

* Will load the machine on to the truck sent by the Customer

* Will train the Customer

* Will assemble Machine - Additionally air transport from Jeddah to and Back if out side SAUDI

ARABIA and board and lodging of three of our personnel technicians will be paid by the Customer

5- RESPONSİBILITIES OF THE CUSTOMER:

* Will make all civil works for the foundations, the supply of stable energy, clean soft water and

air and required pressure near the machines. (Pumps, compressor, Energy supply cable up to

the machine, Water filtering and softening equipment are of our scope.)

* Will pay the transporter and insurance cost of the machine from Jeddah to your erection site at

a cost that will be determined when agreed with us.

* Will take care for all crane handling of materials in transport in erection site when necessary

at costumers cost..

6- GUARANTEE TERMS: All equipment to be supplied to Customer are being new equipment

and will be guaranteed by Alkone for the malfunctions due to manufacturing and installation faults

which are not arised from accidents and misuse of operators for 1 year from the date of

installation (not longer than 14 months from date of invoicing). Preventive maintenance is a must

for the guarantee. The guarantee will be valid only for Ex- works Jeddah replacement of the

defected parts and if our technician is request for the replacement and /or repair works, the round


000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000


trip air tickets, board and lodging of the technical personnel will be paid by the customer. Electrical

parts are not in the scope of the guarantee. The customer should take all precautions for

preventing the machine from freezing environment or should drain the water in the water

installations of the machine before freezing takes place. The customer should supply clean and

treated water, conditioned compressed air and should take all necessary actions to prevent the

electrical parts not to face fluctuations of energy. The consumables are not subject to guarantee

terms.

This offer is valid for 2015 and prices can change during the Year.

We thank you for choosing Alkone Super Clean the number 1 supplier in the Middle East.

Please do not hesitate to call upon us for your car wash purchases as we will be so delighted to

help you with our best quality equipment’s.

OKYANUS SUPER WDR 290 ˘ ˇ˘ˆ car... · 2.50 m. It yields best washing results for small cars,...

Documents

Transcript of OKYANUS SUPER WDR 290 ˘ ˇ˘ˆ car... · 2.50 m. It yields best washing results for small cars,...