OILS AND LUBRICANTS - Paramo

OILS AND LUBRICANTS FOR INDUSTRY

Joint-stock company PARAMO, with its more than hundred and thirty year tradition of producing powerful lubrication oils, is inseparably linked to the history of the production of the MOGUL oils. In the Czech Republic, the MOGUL brand has become a synonym to the word oil during the many years customers have been able to buy the MOGUL products. The current MOGUL oils

are not only comparable to the best oils of other world manufacturers, but their parameters often surpass them.

BRAND

1

Brand value

Tradition, innovation, quality, favourable price and availability - those are the key success factors of the MOGUL brand. Based on independent researches, MOGUL is the most famous and used lubrication brand on the Czech market. PARAMO is maintaining an approximate 25% of the market share in the area of final lubricants, including its

main retail brand MOGUL. The overall company export amounts to more than 50%. PARAMO focuses on cooperation with successful motor

sport teams. Quality of this line was confirmed by, for example, the Czech national team at the International Six Days Enduro in Germany in 2012. PARAMO was awarded the prestigious PETROLawards prize in the Product category for its MOGUL MOTO line.

In 2014 and in the following years, PARAMO was awarded the CZECHSUPERBRANDS prize for its MOGUL brand. The prize is awarded by the Brand Counsil

based on strict and exactly defined criteria. All oils of the MOGUL brand comply with the strict criteria of

the applicable international standards, including car manufacturer standards (such as the VW, Ford, MB and other groups). PARAMO provides free business and

technical presale and post-sale service for all its products. The service is focused on the selection of proper lubricants and their correct application. PARAMO also provides

consultations to its customers, advising them how to properly use oils and how to monitor the given quality parameters during operation. MOGUL oils are designated for customers who take care of

their own cars and machines, but also for large transportation companies, car repair shops, industry and agriculture.

Socially responsible conduct

Developing and producing products with minimal risks of negative impacts on the environment is the priority of PARAMO. That is why the company has, since 1993, spent

more than 60 million crowns on liquidating old environmental burdens caused by bombing during World War II and by environmentally harmful behaviour of the state-owned company prior to privatization. PARAMO claims its responsibility for observing the

Responsible Care in Chemistry program. PARAMO is the fifth company in the Czech Republic that received the Sustainable Development Prize for fulfilling the principles defined at the UN Summit in Rio de Janeiro. The company is also a holder of certificates that confirm a proper application and utilization of the given quality management systems, environmental management and occupational health and safety.

Brand and numbers

The company currently produces more than 150 types of oil

In 1931, MOGUL made an appearance in the legendary Powder and Petrol movie by the famous couple

Voskovec and Werich

Jarek Nohavica as well as Ivan Mládek used the word MOGUL in their songs

The annual production of the one-litre oil packages placed side by side could border the entire road from Pardubice to Prague

The company annually produces approximately 80 million litres of oil

Pursuant to independent surveys, spontaneous awareness of the brand is more than 70% (induced

awareness amounts to 95%)

Pursuant to independent surveys, 1/3 of the Czech drivers uses the MOGUL brand

INDUSTRIAL OILS

2

INDUSTRIAL OILS

Industrial lubricants are classified based on the given viscosity classes and performance standards. ISO VG viscosity classes specify the median viscosity value in mm2/s at 40 °C. In most cases, this viscosity is included in the oil marking, usually as a number at the end of the oil trading name. A letter code is usually before this number. It characterizes the oil performance. The first letter usually marks the type of oil based on its main usage area pursuant to standard ISO 6743 or DIN 51502. The remaining letters usually determine what refining additives the oil must have. Alternatively, they can specify its use in more detail.

ISO 3448 - viscosity classes of industrial lubricants

ISO 6743, DIN 51 502 - performance classes of industrial lubricants

ISO VG viscosity class

Medium oil viscosity in mm2/s

Viscosity range at 40 °C

ISO VG 2 2.2 1.98-2.42

ISO VG 3 3.2 2.88-3.52

ISO VG 5 4.6 4.14-5.06

ISO VG 7 6.8 6.12-7.48

ISO VG 10 10 9.0- 11.0

ISO VG 15 15 13.5-16.5

ISO VG 22 22 19.8-24.2

ISO VG 32 32 28.8 - 35.2

ISO VG 46 46 41.4-50.6

ISO VG 68 68 61.2-74.8

ISO VG 100 100 90-110

ISO VG 150 150 135-165

ISO VG 220 220 198 - 242

ISO VG 320 320 288 - 352

ISO VG 460 460 414-506

ISO VG 680 680 612-748

ISO VG 1000 1000 900 - 1100

ISO VG 1 500 1500 1350 - 1650

ISO VG 2200 2200 1980 - 2420

ISO VG 3200 3200 2880 - 3520

Lubrication application ISO 6743 DIN 51 502

OPEN LUBRICATION SYSTEMS, STANDARD OILS

A AN, B

SEPARATORS, FORM OILS B FS

COGGED GEARS, CIRCULATION SYSTEMS

C C, HYP

COMPRESSORS D V, K

COMBUSTION ENGINES E HD

SPINDLES, BEARINGS AND CORRESPONDING CLUTCHES

F C

SLIDING LINES G CG

HYDRAULIC SYSTEMS H H, HV, HF, ATF

METAL MACHINING M S, W

ELECTRIC INSULATION N J

PNEUMATIC MACHINES, OIL MIST LUBRICATION

P D

HEAT-CONDUCTING MEDIA Q Q

PROTECTION AGAINST CORROSION

R R

TURBINES T TD

THERMAL PROCESSING U L

OTHER APPLICATIONS Y F

STEAM MACHINES Z Z

INDUSTRIAL OILS

3

Oils for oil-loosing lubrications ISO 6743/1 - A

AN - refined mineral oils

Bearing oils ISO 6743/2 - F

FC - mineral oils refined by antioxidant additives

Oils for turbines and turbo compressors ISO 6743/5 - T TS - steam turbines

TSA - highly refined mineral oil with anticorrosion and antioxidation characteristics

TG - gas turbines

TGA - highly refined mineral oil with anticorrosion and antioxidation characteristics

TGB - highly refined mineral oil with anticorrosion and antioxidation characteristics for higher temperatures

Hydraulic oils ISO 6743/4 - H HH - additives-free oil HL - HH oil with anticorrosion and antioxidation additives HM - HL oil with an anti-abrasion additive HV - HM oil with an additive for increasing its viscosity

DIN 51 524 part 1, HL - oil with anticorrosion and

antioxidation additives part 2, HLP - HM oil pursuant to ISO 6743/4 part 3, HVLP - HV oil pursuant to ISO 6743/4

(H - hydraulic liquid, L - anticorrosion and antioxidation characteristics, P - anti-abrasion characteristics, V - reduced viscosity dependency on temperature, D - additional letter that signifies improved detergent characteristics)

Compressor oils ISO 6743/3A - D D - air piston compressors

Piston and rotational plate compressors DAA - exposed to light loads DAB - exposed to medium loads DAC - exposed to high loads Rotational compressors flooded with oil DAG - exposed to light loads

DAH - exposed to medium loads DAJ - exposed to high loads DR - refrigerant compressors

DRA - piston compressors, with suction of up to -40 °C, ammonia, halogens

DIN 51 506 VB, VBL - displacement air temperature up to 140 °C VC, VCL - displacement air temperature up to 160

respectively 220 °C VD, VDL - displacement air temperature up to 220 °C

Industrial transmission oils DIN 51 517 part 1, C - additive-free oils part 2, CL - C oils with antioxidation and anticorrosion

additives part 3, CLP - CL oils with an additive against wear and

tear (L - anticorrosion and antioxidation characteristics, P - anti-abrasive characteristics)

HYDRAULIC OILS

4

HYDRAULIC OILS

Trading name ISO VG Viscosity

index

Flash point [°C]

Pour point [°C]

Specification

MOGUL HVLP-D 46 46 160 220 -39

ISO 11158 HV ISO 6743/4 HV DIN 51 502 H DIN 51 524-3 HVLP Corresponds to: MAN N698 H-LPD

Deeply refined mineral oil, refined by additives against oxidation, wear and tear, corrosion and foaming, and by detergent dispersion component. It contains a shear-stable viscosity index modifier. It is designated for hydrostatic mechanisms exposed to high loads, particularly mobile technology (mechanisms of heavy excavation machines that work within a wide range of operation temperatures and that require a low viscosity dependency on temperature). The detergent component increases the oil filterability, ensures cleanliness and protects the control elements of the hydraulic systems.

MOGUL HV 32 ZF 32 166 210 -40

ISO 11158 HV ISO 6743/4 HV DIN 51 502 H DIN 51 524-3 HVLP Corresponds to: U.S.STEEL 126, 127 Sperry Vickers I-286-S AFNOR NF E 48-603 (HV) CETOP RP 91 H (HV) HOESCH HWN 2333, Thyssen TH N-256 132 Denison Filterability TP 02100, SEB 181222

MOGUL HV 46 ZF 46 160 222 -42

Ash-free hydraulic oils refined in a hydrogenous way. They are refined using additives against oxidation, wear and tear, corrosion and foaming. They contain a shear-stable viscosity index modifier. They are designated for hydrostatic mechanisms exposed to high loads, particularly mobile technology (mechanisms of heavy excavation machines that work within a wide range of operation temperatures and that require a low viscosity dependency on temperature). Viscosity index Vl> 150. *

MOGUL HV 32 32 165 210 -39 ISO 11158 HV ISO 6743/4 HV DIN 51 502 H DIN 51 524-3 HVLP Corresponds to: U.S.STEEL 126, 127 Sperry Vickers I-286-S AFNOR NF E 48-603 (HV) CETOP RP 91 H (HV) HOESCH HWN 2333, Thyssen TH N-256 132 Denison Filterability TP 02100, SEB 181222

MOGUL HV 46 46 162 222 -42

MOGUL HV 68 68 160 234 -39

Deeply refined mineral oils. They are refined using additives against oxidation, wear and tear, corrosion and foaming. They contain a shear-stable viscosity index modifier. They are designated for hydrostatic mechanisms exposed to high loads, particularly mobile technology (mechanisms of heavy excavation machines that work within a wide range of operation temperatures and that require a low viscosity dependency on temperature). Viscosity index Vl> 150.

HYDRAULIC OILS

5

HYDRAULIC OILS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL HM32 ZF 32 115 218 -45 ISO 11158 HM ISO 6743/4 HM DIN 51 502 H DIN 51 517-3 CLP DIN 51 524-2 HLP Corresponds to: Můller-Weingarten requirements SEB specifications Busak & Shamban micro scratching test ENGEL for ISO VG 46 and 68

MOGUL HM 46 ZF 46 115 240 -42

MOGUL HM 68 ZF 68 115 256 -30

Ash-free hydraulic oils refined in a hydrogenous way. They are designated for hydrostatic mechanisms of stationary as well as mobile machines, which are exposed to high mechanical and thermal loads and which operate in unprotected environments; the oils have an excellent ability to separate water, good ability to separate air and and excellent hydrolytic stability. They are particularly designated for hydraulic mechanisms with extraordinary requirements for the hydraulic liquid lifespan. They provide high resilience against wear and tear (FZG> 12).

MOGUL H-LPD 46 ZF 46 121 234 -36

ISO 11158 HM ISO 6743/4 HM DIN 51 502 H DIN 51 524-2 HLP DIN 51 517-3 CLP Corresponds to: MAN N698 H-LPD Můller-Weingarten requirements SEB specifications Busak & Shamban micro scratching test

Ash-free hydraulic oil refined in a hydrogenous way. It is designated for hydrostatic mechanisms exposed to high mechanical and thermal loads; furthermore, its detergent dispersion component allows for a dispersion of water, oxidation products (sludges) and other ingredients - improved cleanliness of hydraulic mechanisms, especially in the case of systems with long-term oil fillings. Cleans the entire hydraulic system very efficiently. It provides high resilience against wear and tear (FZG> 12).

MOGULHM 32 S 32 124 218 -45 ISO 11158 HM ISO 6743/4 HM DIN 51 502 H DIN 51 524-2 HLP Corresponds to: U.S.STEEL 126, 127 and 136 SS 155434; VDMA 24318 AFNOR NF E 48-603 (HM) Cincinnaty Machine P-68, P-69, P-70 Denison HF0, HF1, HF2 ENGEL for ISO VG 46 and 68

MOGULHM 46 S 46 115 242 -39

MOGULHM 68 S 68 115 258 -33

Deeply refined crude oil hydrogenates of narrow cuts, refined by a complex of effective, ash-free additives. Their basic usage characteristics are similar to those of standard oils of the HM type. However, contrary to them, their thermal oxidation stability is significantly higher and they can separate air and water faster. They are particularly designated for hydrostatic mechanisms with extraordinary requirements for the hydraulic liquid lifespan (extended exchange periods), equipped with filters with a high nominal filtration ability and with high-pressure generators (plate, axial and radial piston), such as injection moulding machines, CNC machines etc. They provide high resilience against wear and tear (FZG> 12).*

HYDRAULIC OILS

6

HYDRAULIC OILS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL H-LPD 22 22 112 224 -39

ISO 11158 HM ISO 6743/4 HM DIN 51 502 H DIN 51 524-2 HLP Corresponds to: MAN N698 H-LPD

MOGUL H-LPD 32 32 116 224 -36

MOGUL H-LPD 46 46 121 244 -30

MOGUL H-LPD 68 68 119 270 -27

Hydraulic oils refined in a hydrogenous manner with a detergent and dispersion element for hydrostatic mechanisms exposed to high mechanical and thermal loads, when there is a danger of contamination by mechanical dirt particles, oxidation products (sludges), machining liquids, water and other pollutants. Cleans the entire hydraulic system very efficiently. They allow for a safe operation of hydraulic systems with up to 0.2% of water in the oil.

MOGULHM 10* 10 112 168 -36 ISO 11158 HM ISO 6743/4 HM DIN 51 502 H DIN 51 524-2 HLP Corresponds to: U.S.STEEL 126, 127 Sperry Vickers I-286-S AFNORNF E 48-603 (HM) CETOP RP 91 H (HM) HOESCH HWN 2333, Thyssen TH N-256 132 Denison Filterability TP 02100, SEB 181222 ENGEL for ISO VG 46 and 68

MOGUL HM 22 22 107 208 -39

MOGUL HM 32 32 109 218 -33

MOGUL HM 46 46 107 236 -33

MOGUL HM 68 68 105 242 -30

MOGUL HM 100 100 100 268 -21

Highly refined mineral oils. They are refined using additives against oxidation, wear and tear, corrosion and foaming. They are designated for hydrostatic mechanisms exposed to high mechanical and thermal loads. They are suitable for mobile technology as well as for lubricating circulation systems exposed to high loads.

MOGULHFC46 46 - - -36

ISO 12922 HFC ISO 6743/4 HFC DIN 51 502 HFC VDMA 24 317 Corresponds to: Standards pursuant to Article VII of the Luxembourg report.

Hydraulic liquid on the water-glycol basis that is hard to ignite, for applications with a high risk of fire or explosion. It is particularly used as an operation liquid in hydraulic devices when pressure-casting metals (aluminium, zinc, ...). It is also suitable for steelworks, mines, etc., when a liquid of this type is required. Maximal operation temperature 55°C. *

MOGUL OT-HP3 32 131 222 -42 Corresponds to: GM Allison Type C3 VOITH - hydro clutches and industrial retarders

Operation liquid particularly for hydrodynamic mechanisms (hydrodynamic clutches, hydro converters, hydrodynamic transmissions) of trucks, buses, construction technology, etc. It can also be used for hydrostatic mechanisms, especially for mechanisms with a common filling.

MOGUL ON-1 15 170 158 -42 ISO 6743/4 HH DIN 51524 H

For the hydraulics of water turbine fast-closing valves and, exceptionally, also for the hydraulics of mobile machines (only in winter months at very low temperatures). *

HYDRAULIC OILS

7

HYDRAULIC OILS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL HEES 32 32 170 190 -36 ISO 15380 HEES ISO 6743/4 HM DIN 51 502 H VDMA 24 568 HEES

MOGUL HEES 46 46 165 284 -36

Biologically easily degradable synthetic ester hydraulic oils for hydrostatic systems of machines and devices exposed to high loads that are operated all year long (temperatures between - 20 and 70 °C, or, for a short period of time, up to 80 °C), lifespan of which is expected to be identical to the situation when mineral oils of the HV or HM group are used. They are particularly designated for environments with a risk of oil leaks and contamination of soil, water and water sources. They comply with the requirement of the “Forest Act”, i.e. Act No. 289/95 Coll. and related directives that are applicable to biological degradability. Their excellent biological degradability under the conditions of the OECD 301 B test - more than 73% of the oil is degraded after 28 days.

MOGUL INDICATOR - - - -9 ISO 6743/10YR

Special product for colouring or marking system oil fillings (such as hydraulic liquids) when leak locations need to be determined precisely. The product is blue The recommended dosing is approximately 0.003%. *

MOGUL DEFOAMER (480) >100 - -23 ISO 6743/10 YS

The product is used for reducing surface tension and for suppressing increased foamability of oil fillings (for example, hydraulic liquids). Silicone-free. The recommended dosing is approximately 0.003 - 0,05%.*

OILS FOR PNEUMATIC MECHANISMS (ADDING LUBRICANT TO COMPRESSED AIR)


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL PNEUMAT 22 22 105 218 -33

ISO 6743/11 PAB, PBB DIN 51 502 D

MOGUL PNEUMAT 32 ZF 32 124 224 -42

MOGUL PNEUMAT 46 46 108 253 -21

Mineral oils refined in a hydrogenous manner. They contain additives that improve anticorrosion characteristics of the oil and lower the freezing point. Moreover, they also contain high-pressure additives and anticorrosion and antifoaming additives. The oils are particularly designated for additional lubrication of pneumatic tools (pneumatic rotational tools, pneumatic lines, etc.). MOGUL PNEUMAT 32 ZF is based on ash-free adding of additives. Thanks to their suitable additives, the oils can also

be used for hydrostatic hydraulic mechanisms.

RINSING OIL


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL V 2 26/40 °C 96 218 -33 -

Refined mineral oil with an added freezing point reducer for rinsing, for example, car engines.

BEARING OILS

8

BEARING OILS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL OL-P03 H * (3) - (110/PM) -60

ISO 6743/1 AN ISO 6743/2 FC, FD DIN 51 502 AN DIN 51 517-2 CL DIN 51 524-1 HL

MOGUL OL-J 3 * 5 - 140 -27

MOGUL OL-J 10* (10) 90 186 -15

MOGUL OL-J 22 22 95 206 -27

MOGUL OL-J 32 32 95 224 -24

MOGUL OL-J 46 46 95 234 -18

MOGUL OL-J 68 68 95 246 -15

MOGUL OL-J 100 100 90 262 -12

MOGUL OL-P03 H - Special oil for lubricating slide bearings of high-speed spindles of machining centres and textile

machines. They can be also used for finalizing grinding, honing, superfinishing and lapping operations. MOGUL OL-J - Deeply refined mineral oils with an improved oxidation stability. They are used for long-term fillings of

lubrication machine sets, and for lubricating bearings, transmissions, simple hydrostatic systems, etc. Particular oil is selected based on the given kinematic viscosity, i.e. lubrication film capacity.

MOGUL OL-B1 * 18/40 °C - 194 -18

ISO 6743/1 A DIN 51 502 AN, B

MOGUL OL-B2 (32) - 218 -12

MOGUL OL-B4 58/40 °C - 250 -9

MOGUL OL-B5 77/40 °C - 250 -12

MOGUL OL-B7 116/40 °C - 268 -9

Mineral oils without additives. They are used for short-term lubrication systems not exposed to thermal loading, losing lubrications of machine parts, technological purposes, rinsing of circulation systems when exchanging oil fillings, etc.

MOGUL OLN-J22 22 95 206 -36 ISO 6743/4 HL DIN 51 517-2 CL DIN 51 524-1 HL CETOP RP 91 H HL

MOGUL OLN-J32 32 98 216 -27

MOGUL OLN-J46 46 95 224 -30

Deparaffinized, deeply refined mineral oils with a good oxidation stability, small viscosity-temperature dependency and excellent, low-temperature characteristics. They are particularly used for hydrostatic mechanisms and in applications, for which OL-J type oils are not suitable due to their low-temperature characteristics.

OILS FOR SLIDING LINES

9

OILS FOR SLIDING LINES


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL MULTI 46 46 98 226 -27 ISO 6743/4 HM, HG ISO 6743/6 CKC ISO 6743/13 GA DIN 51 502 CGLP DIN 51 517-3 CLP DIN 51 524 -2 HLP Corresponds to: Cincinnati Milacron P-47 (MULTI 68) Cincinnati Milacron P-50 (MULTI 220)

MOGUL MULTI 68 68 98 238 -24

MOGUL MULTI 100 100 98 250 -24

MOGUL MULTI 150 150 95 254 -21

MOGUL MULTI 220 220 95 256 -21

Deeply refined mineral oils. They are refined by a complex, ash-free additive mixture. The oils are designated for lubricating transmissions, hydraulic circuits, rolling bearings and guiding surfaces of modern machining centres that work in demanding operation conditions, where the multifunctional character as well as high quality of these oils are useful. *

MOGUL GLISON 46 46 - 212 -21

ISO 6743/13 G DIN 51 502 CGLP Corresponds to: Cincinnati Milacron P-47 (GLISON 68) Cincinnati Milacron P-50 (GLISON 220)

MOGUL GLISON 68 68 - 228 -24

MOGUL GLISON 100 100 - 246 -15

MOGUL GLISON 220 220 - 250 -9

MOGUL GLISON 320 320 - 265 -6

Highly refined mineral oils. They are refined by a complex additive that increases lubrication film capacity. They prevent jerky suction movement at low sliding speeds (so-called stick-slip). They are designated for lubricating horizontal as well as vertical sliding lines of machining centres and production systems. They are also used for lubricating some transmissions (of, for example, machining centres) with rather lower transmitted power outputs. *

MOGUL KV 46 46 - 230 -21 ISO 6743/13 G DIN 51 502 CGLP Corresponds to: Cincinnati Milacron P-47 (KV 68) Cincinnati Milacron P-50 (KV 220)

MOGUL KV 68 68 - 248 -15

MOGUL KV 220 220 - 278 -9

Highly refined mineral oils. They are refined by a complex additive that increases lubrication film capacity. They prevent jerky suction movement at low sliding speeds (so-called stick-slip). They are designated for lubricating horizontal as well as vertical sliding lines of machining centres and production systems. They are also used for lubricating some transmissions (of, for example, machining centres) with rather lower transmitted power outputs. *

TURBINE OILS

10

TURBINE OILS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL TB 32 EP 32 135 246 -15

ISO 6743/4 HL ISO 6743/5 TGA, TGB, TGE, TSA, TSE DIN 51515-1 L-TD DIN 51515-2 L-TG DIN 51 517-2 CL DIN 51524-1 HL Corresponds to: ŠKODA POWER, s.r.o. Plzeň Siemens TLV 9013 04/01 British Standard BS 489 GEK 32568 F U.S. Steel 120 Solar EC 9-224 Alstom HTGD 90117 V0001 S

MOGUL TB 46 EP 46 127 264 -15

Deeply refined mineral turbine oils with a high-pressure additive. They are designated for circulation lubrication sets of steam and gas turbines and turbo compressors, which have a common filling with the given gearing, and for which an oil with an increased lubrication film capacity is required (FZG test A/8.3/90> 8).*

MOGUL TB 32 S 32 105 248 -21 ISO 6743/5 TGA, TGB, TSA DIN 51 502 TD DIN 51515-1 L-TD DIN 51 517-2 CL Corresponds to: AFNORNFE 48-603 HL ŠKODA TURBINES SOLAR Turbines (TB 32 S, TB 46 S)

MOGUL TB 46 S 46 105 260 -15

MOGUL TB 68 S 68 105 268 -12

Deeply refined redistilled hydrogenates. They are refined by a special additive mixture for increasing their oxidation stabil ity and protection against corrosion. They have an excellent oxidation stability; their lifespan is more than double of the lifespan of the oils from the MOGUL TB group. They are designated for lubricating steam, gad and water turbines and compressors exposed to high loads. *

MOGUL TB 32 32 100 240 -15 ISO 6743/4 HL ISO 6743/5 TGA, TGB, THA (for TB 68), TSA DIN 51 502 TD DIN 51515-1 L-TD DIN 51 517-2 CL Corresponds to: ŠKODA TURBINES SOLAR Turbines (TB 32, TB 46)

MOGUL TB 46 46 105 254 -15

MOGUL TB 68 68 100 270 -12

Deeply refined mineral oils with antioxidation and anticorrosion additives. They are designated for lubricating steam, gad and water turbines and compressors. *

COMPRESSOR OILS

11

SYNTHETIC OILS FOR AIR AND GAS COMPRESSORS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL KOMPRIMO 46 SYNT 46 144 250 -51 ISO 6743/3A DAJ DIN 51 506 VDL

Highly powerful synthetic (PAO) compressor oil refined by an ash-free additive mixture, particularly designated for lubricating screw compressors that operate under difficult operation conditions. The oil boosts a long lifespan - it guarantees compliance with long exchange period specified by the given compressor manufacturer.

OILS FOR AIR AND GAS COMPRESSORS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL KOMPRIMO VDL 46 46 110 256 -27 ISO 6743/3A DAJ (VDL 46, 68) DAC (VDL 100) DIN 51 506 VDL Corresponds to: ČKD TURBOKOMPRESORY, a.s. ČKD KOMPRESORY, a.s. ČKD PRAHA ENERGO, a.s. ČKD ŽANDOV, a.s. ATMOS, s.r.o.

MOGUL KOMPRIMO VDL 68 * 68 114 262 -27

MOGUL KOMPRIMO VDL 100 100 95 278 -24

Deeply refined mineral oils. They are refined by a complex, ash-free additive mixture for improving their anti-abrasion and anticorrosion characteristics and thermooxidation stability. MOGUL KOMPRIMO VDL 46, 68 are particularly designated for

lubricating rotational screw compressors exposed to relatively high loads (output temperature of 100 °C) and for some turbo compressors. MOGUL KOPRIMO VDL 100 is designated for air and gas piston compressors exposed to high loads (output

temperature up to 220 °C), particularly in cases when oils of lower performance characteristics are not sufficient any more due to, for example, formed deposits, carbon, etc.

MOGUL K 8 100 95 278 -12

ISO 6743/3 DAA (K 8), DAB DIN 51 506 VBL, VCL

MOGUL K 12 150 92 280 -9

MOGUL K 16 220 90 284 -12

MOGUL K 18 320 90 294 -9

MOGUL K28 460 90 306 -6

Refined mineral oils with an improved oxidation stability. They are particularly used for lubricating air and gas compressors as well as filling of some industrial transmissions and circulating lubrication systems. They can also be used as heat-inducting media.

COMPRESSOR OILS

12

OIL FOR COOLING COMPRESSORS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL ON-3 36/40 °C - 190 -33 ISO 6743/3 DRA DIN 51502 K DIN 51503-1 KA

For cooling compressors. For ammonia piston compressors exposed to low thermal loads (output temperature below 100 °C, temperature in the tub below 50 °C).

MOGUL ONF 46 46 95 232 -33 ISO 6743/3 DRA DIN 51503-1 KC

Deeply deparaffinized oil designated for lubricating ammonia screw compressors that use cooling R 12 or ammonia (R 717).

MOGUL ON 5 68 - 195 -36 ISO 6743/3 DRA DIN 51502 K DIN 51503-1 KA, KC

Refined naphthenic oil particularly designated for lubricating ammonia piston compressors.

MOGUL KOMPRIMOONC 68 68 101 246 -36

ISO 6743/3 DRA DIN 51 503-1 KA, KC Corresponds to: ČKD CHLAZENÍ, s.r.o.

Deeply deparaffinized oil designated for lubricating piston compressors that use cooling ammonia (R 717) or cooling R 12 and R22. It is also suitable for refrigerant screw compressors. Fully replaces the originally used ON 5V oil.

VACUUM PUMP OIL


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL R2 100 90 234 -9 ISO 6743 DVA DIN 51 502: V

Mineral oil designated for lubricating two-level rotational vacuum pumps. For small vacuums (up to 100 Pa, i.e. 1 mbar) and nonaggressive gases.

INDUSTRIAL TRANSMISSION OILS

13

SYNTHETIC INDUSTRIAL TRANSMISSION OILS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL INTRANS 150 SYNT 150 160 236 -68 ISO 12925-1 CKD ISO 6763/6 CKD DIN 51 517-3 CLP Corresponds to: AGMA 9005-D96 Siemens/Flender FAG SKF

MOGUL INTRANS 220 SYNT 220 165 236 -65

MOGUL INTRANS 320 SYNT 320 160 268 -62

PAO-based oils for lubricating industrial transmissions of all types exposed to high loads, particularly transmissions with extreme pressures in gears; they are suitable for rolling gears (spur gears and cone gears), screw gears (worm gears etc.), for applications endangered by wear and tear - mikropitting, such as gears exposed to extreme loads with surface-hardened teeth, but also for lubricating bearings and other moving machine parts. *

MINERAL INDUSTRIAL TRANSMISSION OILS


index

Flash point [°C]

Pour point [°C]

Specification

MOGUL CLP 100 100 100 232 -24

ISO 12925-1CKC ISO 6743/6 CKC DIN 51 517-3 CLP Corresponds to: AGMA 9005-E02 US Stell 224 David Brown S1.53.101

MOGUL CLP 150 150 100 236 -21

MOGUL CLP 220 220 100 248 -15

MOGUL CLP 320 320 97 250 -15

MOGUL CLP 460 460 95 256 -12

MOGUL CLP 680 680 95 258 -3

Deeply refined mineral oils. They are particularly refined by high-pressure additives. They are designed for transmissions of all types exposed to high loads, which operate within a wide range of speeds. MOGUL CLP 320 and 660 are particularly designated for slow-running transmissions (cone and worm gears), for lubricating slow-running bearings and other machine parts with high demands for anti-abrasion oil characteristics. *

MOGUL PP 7 100 100 238 -30

ISO 6743/6 CKE API GL-3+

MOGUL PP 13 220 93 258 -15

MOGUL PP 44 680 98 302 -6

Highly refined transmission oils with an anti-abrasion and high-pressure additive. They are particularly used for filling lubrication circulation systems, undemanding industrial transmissions and transmissions of older cars. The MOGUL PP 44

oil is successfully used for old, leaking transmissions and particularly transmission of veteran cars.

CYLINDER OILS AND DARK OILS

14

CYLINDER OIL

Trading name

Kinematic viscosity at

100 °C [mm2/s]

Viscosity index

Flash point [°C]

Pour point [°C]

Specification

MOGUL P 28 32 - 330 -6 ISO 6743/0 Z DIN 51 502 Z

The oil is characterized by a high viscosity, an additive for an increased lubrication ability and adhesion, which also limits the scraping effect of steam. It is designated for lubricating cylinders of steam machines, which operate with wet and overheated steam and which have increased requirements for the lubrication ability and adhesion during operation with fluctuating loads up to 300 °C.

MOGUL B 25 31 - 290 -6

ISO 6743/0 Z DIN 51 502 Z

MOGUL B 28 35 - 320 -6

MOGUL B 31 37 - 320 -3

The oils have a high viscosity for lubricating cylinders of steam engines that work with wet steam with temperatures of up to 250 °C (B 25), up to 300 °C (B 28) resp. over 300 °C (B 31). They are also used for lubricating screw gears under high temperatures.

DARK OILS

Trading name


40 ˚C [mm2/s]

Viscosity index

Flash point [°C]

Pour point [°C]

Specification

MOGUL OD 3 46 - 234 -30

ISO 6743/1 AY DIN 51 502 AN, B

MOGUL OD 4 68 - 240 -27

MOGUL OD 8 150 - 256 -21

MOGUL OD 11 220 - 268 -15

MOGUL OD 16 320 - 280 -12

MOGUL OD 20 90/100 °C - 230 -3

Crude oil distillates refined with a freezing point reducer. The oils have a high adhesion ability. They are designated for various industrial applications. MOGUL OD 3 to OD 16: They are designated for lubricating sliding bearings exposed to high pressures, bearings in dusty

environments, transport devices, agricultural machines, metallurgical equipment - when lubricating low-speed transmissions with rough cogs and leaking transmissions. MOGUL OD 20: Oil for lubricating mechanical gears and machine parts that require a high adhesion ability of the oil.

ELECTRO-INSULATION OILS

15

ELECTRO-INSULATION OILS

Trading name ISO VG

Breakdown voltage

after drying

[kV]

Flash point [°C]

Pour point [°C]

Specification

MOGUL TRAFO CZ-A 10 80 181 /PM -65 ISO 6763/0 N Corresponds to: IEC 60296

Low-viscosity, deeply refined, high-quality inhibited transformer oil designated for transformers of all voltage levels, including overloaded machines. Does not contain PCB, PCT and Furans. *

MOGUL TRAFO N-A 10 60 163/PM -68

ISO 6763/0 N Corresponds to: IEC 60296 ASTM D 3687 typ I AS 1767.1-1999

Low-viscosity, deeply refined, high-quality uninhibited transformer oil for devices with high requirements. Does not contain PCB, PCT and Furans. *

SEPARATION OILS

16

SEPARATION OILS

Trading name


40 ˚C [mm2/s]

Flash point [°C]

Pour point [°C]

Acidity number

[mg KOH/g]

Specification

MOGULMKS 9.5 180 -12 6.5

ISO 6743/0 B

MOGUL MK-5 4.5 138 -30 7.0

MOGUL MK-7 8.2 170 -18 6.0

MOGULSEPAR 6.4 148 -24 9.5

MOGUL SEPAR 30 7.2 148 -12 60.0

MOGUL SEPAR SDA 7.3 154 -18 11.2

Low-viscosity separation oils designated to be separation agents for applications in ceramic, cement and construction industries etc. They are designated for an easy separation of the processed material, such as metal, ceramic or chipboard forms. *

MOGUL MKS-E 6.8 126 -24 6.2 ISO 6743/0 B Corresponds to: OECD 301D

MOGUL MKS-L 6.3 152 -24 6.5

MOGUL BIO-CON 7.3 150 -27 8.4

Low-viscosity separation agents based on deeply refined oil, plant esters, fatty acids and surface-active additives. They are particularly designated for deforming aluminium forms during the roofing production. They provide for a flawless separation of the processed material from the form and they keep the forms clean. Environmentally friendly separation agents (degradable pursuant to OECD 301D). *

MOGUL SEPAR B 35.6 220 -5 0.1 ISO 6743/0 B

Easily biodegradable form agent, based on ester oils. Environmentally friendly separation agent (degradable pursuant to OECD 301D).

MOGUL SEPAR FINISH * 4.0 90 -21 5.5 ISO 6743/0 B Corresponds to: OECD 301D MOGUL SEPAR LITE 4.6 180 -15 1.1

Low-viscosity, easily biodegradable oils used as separation agents for concrete production and processing, particularly for deforming plastic forms (polypropylene, polyethylene, PVC, etc.). They contain effective additives that make the separation of the given processed concrete material from the form easy. Their base oil (ester) also allows for the agents to be used as “cleaning” separators when aluminium forms become clogged during, for example, roofing production.

MOGUL SEPAR BIO-BIT* 11.3 120 -27 0.05 ISO 6743/0 B Corresponds to: OECD 301D MOGUL SEPAR SYNT-BIT 9.5 250 -60 -

Low-viscosity, biodegradable oils for an easy separation of coated mixtures during production, processing and application. These separation agents allow for an easy release of the coated mixture from the truck beds, handling technology and other technological elements during production and application. When applied by spraying, aerosol is formed to a minimal extent thanks to specifically used additives. Environmentally friendly separation agents (degradable pursuant to OECD 301D).

MOGUL SEPAR BIO-BIT EM 50 (end) - -5 - ISO 6743/0 B Corresponds to: OECD 301D

Easily biodegradable emulsions (oil in water) used for an easy separation of coated mixtures during production, processing and application. The separation agent allows for an easy release of the coated mixture from the truck beds, handling technology and other technological elements during production and application. The recommended concentration for spray as well as brush and roller applications is at least 20%. The maximal recommended water hardness for preparing the emulsion is 15 °N. Environmentally friendly separation agent (degradable pursuant to OECD 301D). *

SEPARATION OILS

17

MACHINING LIQUIDS THAT DO NOT MIX WITH WATER CUTTING OILS

18

SPECIAL LUBRICANTS AND OTHER PRODUCTS

This group includes a group of lubrication oils and liquids that are applied for a wide range of applications when hardening and forming metals. They are also used for temporary protection against corrosion or as heat-conducting media. The names and markings of the Paramo industrial oils are based on the purpose and usage characteristics of these oils.

CUTTING OILS FOR DEMANDING OPERATIONS

Trading name


40 ˚C [in mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL CUT 15 16.5 180 4c 126 800 ISO 6763/7 MHF

Cutting oil for very demanding machining operations, powerful inner and outer stretching, cogs production by hobbing and shaping, machining and forming of inner and outer threads and for finalizing operations, such as cogs reaming and shaving. It is not suitable for machining copper and its alloys. *

MOGUL CUT 16H 18.0 186 1 b 126 620 ISO 6763/7 MHF

Special cutting oil for demanding machining operations such as deep drilling using single-blade ejector procedures and BTA procedures for high alloy steels and also for finalizing operations in the area of minimal splinters. Apart from deep drilling of construction and high alloy steels, it is also designated for powerful automatic mechanisms and standard as well as complex machining operations on machining centres and lines. It is not suitable for machining copper. *

MOGUL CUT 25 26.8 198 4a 100 500 ISO 6763/7 MHF

Cutting oil for inner and outer stretching, cogs production by hobbing and shaping, machining and forming of inner and outer threads and for finalizing operations, such as reaming. Because of its ability to create an optimal cutting environment even at higher cutting speeds, it is also used for operations conducted on machining centres, machining lines and long-turning automated machines for materials that are difficult to machine. It is not suitable for machining copper.

CUTTING OILS FOR MACHINIG CENTRES

Trading name


40 ˚C [in mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL CUT OC MULTI 16.6 178 4c 126 620 ISO 6763/7 MHF

Powerful cutting oil for splinter machining operations, turning, milling, drilling, sinking, reaming, inner and outer threading, including deep drilling, particularly conducted on machining centres, machining lines and long-turning automated machines. It can be used for these operations even with materials that are hard or very hard to machine. *

MOGUL CUT OC 16.2 180 6b 80 500 ISO 6763/7 MHD

Universal cutting oil for milling, drilling and turning, conducted on machining centres and long-turning machining automatons. It can even be used for more complex drilling, threading and reaming operations. Moreover, it can be used for more complex grinding operations. *

MOGUL CUT OC AL 12.3 182 1b 100 315 ISO 6763/7 MHE

Cutting oil specially formulated for powerful machining of light metal alloys. It is designated for splinter machining, turning, milling, drilling, threading of ferrous and nonferrous metals on machining centres, machining lines and long-turning automatons. *


19

CUTTING OILS FOR HIGH-SPEED MACHINING

Trading name


40 ˚C [in mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL SPEED CUT 13 12.9 174 2c 80 400 ISO 6743/7 MHF

Low-viscosity cutting oil, suitable for machining automaton steels at higher speeds. The oil contains a high share of anti-abrasion additives, which prevent splinter breaking on the machine face. Thanks to the used additives, it can also be used, to a limited extent, for grinding. *

MOGUL SPEED CUT 18 19.1 188 2c 100 500 ISO 6743/7 MHF

Low-viscosity cutting oil, suitable for machining automaton steels at higher speeds. The oil contains a high share of anti-abrasion additives, which prevent splinter breaking on the machine face. Due to the oil viscosity, it is also suitable for cam automatons. *

CUTTING OILS SUITABLE FOR MACHINING ON AUTOMATIC TURNING MACHINES

Trading name


40 ˚C [in mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL CUT 22 22.2 196 4a 80 500 ISO 6743/7 MHD

Powerful universal cutting oil with a wide range of possible applications, for operations with an exactly defined tool geometry as well as more demanding grinding operations. It is particularly designated for machining on automatic turning machines and machining centres, while conducting even more complex machining operations with materials that are harder to machine. It is not suitable for machining copper.

MOGUL CUT 32 33.7 218 1a 100 200 ISO 6743/7 MHD

Cutting oil with a wide range of possible applications, especially for turning on automatic turning machines. Its composition is rather suitable for tools made of fast-cutting steel, machining of steels that are easy to machine, light alloys and nonferrous metals, including copper. When it comes to these materials, it can be used eve for more complex machining operations.

MOGUL CUT 32A 32.5 214 3b 50 315 ISO 6743/7 MHD

Cutting oil with a wide range of possible applications, especially for turning on automatic turning machines and machining centres. Its composition is more suitable for equipment furnished with blade plates made of cemented carbides. It can be used for machining steels that are easy to machine, light alloys and nonferrous metals at higher cutting speeds. It is not suitable for machining copper.

MOGUL CUT 46 46.2 205 4a 100 620 ISO 6743/7 MHF

Medium-viscosity cutting oil for machining materials that are particularly hard to machine. Apart from standard machining, it can also be used more complex machining operations, including inner threading forming. The oil can be used even for very complex machining operations, such as inner and outer stretching and cogs rolling and shaping.


20

UNIVERSAL USE CUTTING OILS

Trading name


40 ˚C [in mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL UNICUT 22 23.9 190 4a 80 620

ISO 6763/7 MHF DIN 51 502 CL DIN 51517 CLP DIN 51526 H-LPD

Low-viscosity universal cutting oil for machining materials that are particularly hard to machine. Apart from standard machining, it can also be used more complex machining operations, including inner threading forming. The oil can be also used for standard final machining grinding and shaving operations. Due to its universal characteristics, it can also be applied in bearing boxes. *

MOGUL UNICUT 32 34.5 202 4a 100 620

ISO 6763/7 MHF DIN 51502 CL DIN 51517 CLP DIN 51526 H-LPD

Medium-viscosity universal cutting oil for machining materials that are particularly hard to machine. Apart from standard machining, it can also be used more complex machining operations, including inner threading forming. The oil can be used

even for very complex machining operations, such as inner and outer stretching and cogs rolling and shaping. *

CUTTING OILS FOR GRINDING AND FINALIZING OPERATIONS

Trading name


40 ˚C [v mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL CUT 3 6.5 161 2c 60 250 ISO 6763/7 MHC

Powerful cutting oil, particularly for grinding, honing, superfinishing and lapping operations, conducted in casts, standard quality construction steels, alloy construction steels and some nonferrous metals, using a grinding diamond, corundum and boron and silicon carbide. It is also designated for lubricating fast-running sliding spindles or grinders and fast-running turning machines, with the exception of new and refurbished spindles, to which it causes overheating. Thanks to its balanced composition of additives, this cutting oil is also suitable for machining light metal alloys using tools with blades, geometry of which is precisely defined. It is not suitable for machining copper. *

MOGUL CUT 7 7.3 165 2b 100 600 ISO 6763/7 MHC

Universal cutting oil for all types of powerful grinding of alloys, construction and alloy steels and some alloys of nonferrous metals, using a grinding diamond, corundum and boron and silicon carbide. *

MOGUL CUT 10 12.3 178 2c 63 200 ISO 6763/7 MHC

Powerful cutting oil for grinding all types of steel and alloys of nonferrous light metals. It can be also used for machining operations using tools with precisely defined blade geometry, while machining alloys of nonferrous and light metals. *

MOGUL CUT 12 GRIND 12.7 189 2b 100 315 ISO 6763/7 MHC

Highly powerful cutting oil for grinding axial cutting tools made of monolith, tool sharpening and powerful shape grinding of casts and construction and alloy steels. *


21

ADDITIVE CONCENTRATES

Trading name


40 ˚C [in mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL EPK 1 46 140 4c 80 800 ISO 6743/7 MHF

Powerful concentrate of high-pressure and anti-abrasion additives for lubrications using a minimal volume of lubricants in the form of aerosols (MQL); it is also usable for additional lubrication of complex machining operations for materials that are hard or very hard to machine. It can be successfully used for improving performance of cutting oils. In this case, the recommended concentration of the added additive to a standard cutting oil is 15-20%. Cutting oils modified in this manner can cause an increased reactivity of the additives with surfaces made of copper and its alloys.

MOGUL EPK 2 320 180 4c 80 800 ISO 6743/7 MHF

It can be used in a 100% concentration for very demanding shaping operations, such as deep pulling, drawing and calibrating. When mixed with bearing oils of any viscosity, it can manage a wide range of these operations with various performance requirements, when an easy subsequent degreasing process is emphasized. The mixture proportionately depends on the viscosity of the used bearing oil and corresponding MOGUL EPK 2 concentration.*

SHAPING LUBRICANTS

Trading name


40 ˚C [in mm2/s]

Flash point [°C]

Cu corrosion

test [100 °C/3 h]

Max. unseizing

load Ls [kp]

Weld load Lz [kp]

Specification

MOGUL PRESS 80 80 202 4c 100 800 ISO 6743/7 MHF

Oil for volumetric shaping. MOGUL PRESS 80 can be used for a wide range of volumetric shaping operations of connecting materials and various components for the automotive industry in advancing shaping instruments, and in precise shearing operations. When used in comprehensive instruments (shaping, shearing, drilling), it works with a large performance reserve. It is used for fast rolling of threads in large serial production processes. MOGUL PRESS 80 can also be relatively easily applied using oils mist. Its invaluable advantage is the ability to easily remove oil films from the surface of the shaped parts prior to any surface treatment.

MACHINING LIQUIDS THAT ARE MIXABLE WITH WATER EMULSIONS AND SOLUTIONS

22

MACHINING LIQUIDS MIXABLE WITH WATER - EMULSIONS AND SOLUTIONS

Machining liquids mixable with water clean the cutting area. They significantly help in improving the surface quality of workpieces and heat discharge from the cutting environment, thus extending the lifespan of the given cutting tool.

SEMISYNTHETIC MACHINING LIQUIDS WITH A HIGH-PRESSURE AND ANTI-ABRASION ADDITIVE

Trading name Mineral oil content in

[%]

pH 5% emulsion in

distilled water at 20 °C

Density at 15 °C

Manual refractomete

r factor

Recommended concentration

in [%]

Specification

MOGUL EOPS 3030 30 9.3 984 1 6-10 ISO 6743/7 MAD

Very powerful machining liquid refined with a biocide component, AW and EP additives, which makes the liquid suitable for operations and materials that are harder or very hard to machine. This liquid manages operations such as inner and outer threading and reaming. When used in higher concentrations, it is powerful enough to be used even for complex machining operations, such as deep drilling . *

MOGUL EOPS 3050 40 9.5 950 1 6-10 ISO 6743/7 MAB

Powerful machining liquid with a higher content of highly refined mineral oil. It has a significant AW effect, which makes it ideal for machining tools with precisely defined blade geometry, particularly for complex machining centres. It is also used for machining steel that is hard or very hard to machine, and light alloys of nonferrous metals. *

SEMI-SYNTHETIC MACHINING LIQUID WITH A LOW OIL SHARE


[%]

pH 5% emulsion in


Density at 15 °C

Manual refractomete

r factor


in [%]

Specification

MOGUL EOPS 1010 5 9.4 1,050 3 6-10 ISO 6743/7 MAE

Machining liquid with a very low oil content, particularly suitable for cutting and grinding operations. It has a great cooling, rinsing and cleaning effect. The liquid is especially used for machining carbon steel and casts. *

SEMI-SYNTHETIC MACHINING LIQUIDS WITH EXTENDED LIFESPAN


[%]

pH 5% emulsion in


Density at 15 °C

Manual refractomete

r factor


in [%]

Specification

MOGUL EOPS 1030 40 9.4 967 1 5-8 ISO 6743/7 MAB

Universal machining liquid with a biocide component and balanced cooling and lubrication effect. It is designated for a wide range of operations with tool with a precisely defined geometry as well as tools, for which the blade geometry is not precisely defined. It is thus suitable for sharpening soft steels, tip-free grinding of soft and thermally processed steels, turning, milling, machining with axial tools on machining centres as well as universal machining instruments. *

MOGUL EOPS 1130 30 9.5 990 1.3 6-10 ISO 6743/7 MAE

Universal machining liquid with an excellent anticorrosion effect. It is designated for a wide range of operations with tool with a precisely defined geometry as well as tools, for which the blade geometry is not precisely defined. It is thus suitable for shaping steel fittings, sharpening soft steels, tip-free grinding of soft and thermally processed steels, turning, milling, machining with axial tools on machining centres as well as universal machining instruments. *

MACHINING LIQUIDS THAT ARE MIXABLE WITH WATER EMULSIONS AND SOLUTIONS

23

MINERAL MACHINING LIQUID


[%]

pH 5% emulsion in


Density at 15 °C

Manual refractomete

r factor


in [%]

Specification

MOGUL ERO 1070 75 9.5 893 1 7-15 ISO 6743/7 MAA

Stable, fully mineral machining liquid, particularly for machining on universal machining tools. It is also suitable for operation in machining centres, provided appropriate maintenance is conducted. Its significant lubrication effect makes it suitable for machining light alloys, steels that are hard to machine and alloys of nonferrous metals. When used in higher concentrations, it can also be used for very demanding machining operations. *

SYNTHETIC MACHINING LIQUIDS


[%]

pH 5% emulsion in


Density at 15 °C

Manual refractomete

r factor


in [%]

Specification

MOGUL SYNT 220 0 9.4 1057 2.8 6-10 ISO 6743/7 MAG

Especially for powerful machining operations, such as grinding of steel thermally processes by hardening, and for machining grey cast iron and ductile cast iron. It has a great cooling, rinsing and cleaning effect. It can be effectively used for machining operations with fine abrasion metals and abrasion, which intensely sediments in the collection reservoirs of circulation systems. *

MOGUL SYNT300 0 9.5 1081 1.8 6-10 ISO 6743/7 MAH

For powerful machining operations, such as steel grinding, particularly when the technology of tip-free grinding of passing workpieces is used, and machining of grey cast iron and ductile cast iron, easily machinable steels and light alloys. It has a great cooling, rinsing and cleaning effect. It can be effectively used for machining operations with fine abrasion metals and abrasion, which intensely sediments in the collection reservoirs of circulation systems. MOGUL SYNT 300 includes a special lubrication additive that allows for machining operations, during which tools with a precisely defined blade geometry are used. *

It is recommended that water-mixable machining liquids are stored at temperatures between 5 and 35 °C., see the data safety sheet, Part 7

AUXILIARY PRODUCTS FOR MODIFYING MACHINING LIQUIDS

Trading name Product characteristics

SANIPOL TLD-1 Product for cleaning and disinfecting circulation systems of the machining liquids mixable with water. pH 14. The system cleaner is applied to the machining liquid in a concentration of 1 -2% of the system filling, 8-24 h before the exchange. *

MOGUL pH STABILIZER

Product for modifying and stabilizing the pH value of machining liquids in the upward direction. It is applied during its operation when the pH value drops under 8 in a concentration of 0.3-0.35%. The pH value of the machining liquid increases after a short circulation to 9.3-9.5.*

ACTICIDE MV Biocide conservation product for reducing microorganisms in the operated machining liquid. It is particularly used when an optimal volume of a biocide agent needs to be set in a machining liquid for further operation. It is applied to machining liquids in a concentration of 0.05-0.4%.*

MOGUL ANTIFOAM The defoamer (0.003-0.01%) is applied to the system filling when there is extensive foaming.

MOGUL ANTIRUST

This corrosion inhibitor for improving anticorrosion characteristics of machining liquids (mixable with water) prevents corrosion caused by salination of the machining systems, which is the result of the use of very hard water with a high volume of chlorides for preparing machining liquids. MOGUL ANTIRUST is even able to suppress corrosion caused by low pH values. It is applied in a concentration of 0.2-0.5%. When used in water in a concentration of 1 -3%, the product can also be used for temporary conservation, especially when the use of a conservation oil is not recommended due to the contamination of the machining liquids during subsequent machining. *

*Classification pursuant to Act No. 350/2011 Coll., see the data safety sheet

HEAT-CONDUCTING OILS

24

OILS FOR THERMAL PROCESSING OF METALS AND HEAT-CONDUCTING MEDIA

Thermal processing of metals is a process, during which the given item is subjected to one or multiple thermal cycles for the purpose of achieving the required material characteristics. It consists of heating to a certain temperature by a given speed, from a holding period, i.e. period when it is kept at the given temperature, and from cooling by a specified speed, usually to the regular temperature. An integral part of the process is formed by a cooling environment, which is most important in the hardening period. The hardening intensity, i.e. heat discharge speed, is significantly different. Hardening environment needs to be assessed based on the speed the heat is being discharged within the range of 650 °C and 550 °C, when a high cooling speeds are required, and within the range of 350 °C and 250 °C, when the cooling speed should be low. The usual cooling environments include water, acid solutions, soap water, machine oils, hardening oils and also air.

COOLING OILS AND ADDITIVES

Trading name ISO VG


100 °C in [mm2/s]

Flash point [°C]

Evaporation capacity

NOACK 1 h at 150 °C

[%]

Specification

MOGUL TK 22 22 4.2 214 0.7 ISO 6743/14 UHD, UHV

Highly powerful hardening oil, particularly designated for being used in enclosed furnaces. Thanks to its intense cooling effect, it is particularly designated for fast hardening of alloy and non-alloy steels of smaller parts. It provides for excellent mechanical characteristics of the hardened parts. Some advantages of this oil include a high cooling speed, favourable part deformations, a wide range of its use and a low evaporation capacity of the oil.

MOGUL TK 46 46 6.7 226 0.2 ISO 6743/14 UHC, UHV

Medium-viscosity universal hardening oil for a wide range of hardening operations, while complying with constant, long-term conditions. The oil offers medium hardening speeds and minimal deformations of the hardened parts.

MOGUL TK 150 68 9.4 250 0.8 ISO 6743/14 UHE

Hardening oil for thermal (hot) hardening with the temperature of the oil bath of 150 °C. The hardening process takes place in an oil bath, heated to the specified temperature. Thanks to its increased viscosity and suitably selected cooling speed, it minimizes the inner tension and subsequent deformations of the hardened parts. It is particularly suitable for hardening larger parts.

MOGUL ACCELERATOR - 13.5 - - ISO 6743/14

Product for modifying the cooling curve of the operated hardening oil filling. Laboratory-proposed and verified formula that contains a high share of an additive that has a favourable effect on the acceleration of the cooling ability of oils. The favourable effect can be observed already with a 1% of the added agent in a given oil filling. The upper concentration limit is 5%.


25

Cooling curves of MOGUL oils

Temperature gradient [°C/s]

Time [s]

Te

mp

era

ture

[°C

]


26


Trading name ISO VG


100 °C in [mm2/s]

Flash point [°C]

Evaporation capacity

NOACK 1 h at 150 °C

[%]

Specification

MOGUL TERM 22 22 4.3 204 12.5 ISO 6743/12 QB

MOGUL TERM 32 32 6.1 228 11.2 ISO 6743/12 QC

Highly powerful heat-conducting oils for heat-conducting systems with forced circulation. They are particularly suitable for indirect heating of reactors, distillation devices, dryers, production device (such as bituminous mixtures facilities), etc. They are especially designated for enclosed heat-conducting systems up to 300 °C. The maximal temperature of the oil film should not exceed 320 °C. *

MOGUL CLEANER 180/40 °C 22.6 210 - ISO 6743/12

Highly effective detergent cleaning product for internal cleaning of systems that operate with heat-conducting media. It helps to release and remove carbon sediments, oxidation products and resins from heating units, pipelines and technological containers during long-term or demanding operations, thus improving effectiveness of the given heat-conducting system. It is also used preventively during regular operation. *

HEAT-CONDUCTING OIL EXCHANGE PROCEDURE Heat-conducting oils in individual systems are exposed to high thermal and oxidation loads. Oxidation products, sludges, carbon, resins, etc. are formed in the oil. These substances clog the entire system and especially heating devices, thus preventing perfect heat transmission. We recommend chemical cleaning of the system prior to every exchange of a heat-conducting oil. Add 1.5-4% (depending on the volume of the sediments in the system) of the MOGUL CLEANER system cleaner prior to

exchanging the heat-conducting oil. Let this cleaner circulate in the system under normal operation for at least 14-30 days. The entire system is subsequently drained and mechanical dirt particles are removed from the tank, heating system and filters. In some cases (excessively clogged system), rinsing of the entire heat-conducting system is recommended. MOGUL CLEANER

can be also used preventively during the operation of heat-conducting systems by adding 1 - 3% of the product.

CONSERVATION AGENTS

27

CONSERVATION AGENTS

In the case of mechanical production and product transport and storage, it is very important to prevent spontaneous and gradual disintegration of metal and nonmetal objects by external factors (corrosion). Targeted conservation is conducted for this purpose. The process consists of applying a protective layer with a conservation effect on the given material surface. PARAMO, a.s., offers conservation agents for short-term interoperation protection as well as medium- and long-term conservation. The conservation agents do not contain silicone. The expected protection against corrosion depends on the packaging and storage manner and on climatic conditions.

CONSERVATION OILS

Trading name


40 °C in [mm2/s]

OK flash point [°C]

Protective film abundance at

20°C [kg/100 m2]

Relative protective

effect Ur 30 days min. [%]

Specification

MOGUL KONKOR 101 13.5 165 1.2 98 ISO 6763/8 RDD


KONKOR 101 and 103 are designated for the protection of products made of ferrous and nonferrous metals against atmospheric corrosion. They are used for conserving and lubricating weapons, machines, fine mechanisms and spare parts. Due to their compatibility with fuels and due to its very thin conservation film, it is also designated for conserving engines and injection pumps. KONKOR 103 can be generally used for applications, for which KONKOR 101 is used, considering formation of a higher oil layer and longer conservation effectiveness. It is also suitable for some special purposes, such as pulling and straightening of profile steels.




KONKOR 210, 222 and 268 are designated for a temporary protection of products made of ferrous and nonferrous metals against atmospheric corrosion. At the same time, they have the ability to so-called displace water from metal surfaces. They also effectively neutralize sweat from your hands and prevent stains being formed on the given conserved surface. Furthermore, they are furnished with VCI corrosion inhibitors, i.e. they are able to conserve in vapours as well. They are easily applied by soaking, spraying or brushing and rolling. They form a very thin, homogenous, oily protective film (2-10 µm) with excellent protective characteristics. The protective film easily dissolves in lubrication oils and does not have to be removed when additional conserved parts are applied. If necessary, they can be removed using degreasing agents. Thanks to their lubrication characteristics, they can be also used for less demanding shaping operations.

CONSERVATION VARNISH

Trading name Viscosity -

output crucible F6 23 °C [s]

Flash point PM [°C]

Drying time in [h.]

Protective film abundance of a 5% emulsion

[g/m2]

Specification

MOGUL KONKOR 500 max. 30 26 5 3.1 ISO 6763/8 RG

Conservation varnish, applied directly on metal. It is suitable for locations where corrosion has already started. No primer should be applied prior to the varnish application. It is not suitable for precious metals (copper, aluminium and fresh, unoxidized zinc coats). Can be used as anticorrosion protection of the bottoms of vehicle chassis. It ideally dries at a temperature around 20 °C; lower temperatures slow the drying down.

CONSERVATION AGENTS

28

CONSERVATION SOLUTIONS

Trading name


40 °C in [mm2/s]

pH of a 20% emulsion in

distilled water at 20

°C


20 °C [kg/100m2]

Relative protective

effect Ur 30 days min.

[%]

Specification

MOGUL KONKOR EM 66.6 9.5 0.3 100 ISO 6743/8 RC

KONKOR EM is a powerful conservation oil that forms a conservation emulsion with water. The emulsion contains highly effective absorption corrosion inhibitors. It is designated for temporary conservation of products made of ferrous and nonferrous metals against atmospheric corrosion. It is also used for conserving profiles, sheet metals as well as entire machine units. It is suitable for interoperative as well as temporary conservation in between individual technological machining operations under machining liquids mixable with water and everywhere where an intensive conservation oil film is not desired. In low concentrations, it can be used as a testing liquid for hooking ovens and enclosed containers. The recommended concentration is 20%.

MOGUL KONKOR 437 1.0 10.3 0.1 92 ISO 6743/8 RB

The synthetic KONKOR 437 conservation liquid is a solution of a suitable corrosion inhibitor and water. It is a modern, water-soluble conservation product designed with a wide spectrum of usable characteristics. Its application is easy and it forms a thin, homogenous protective film. Its water solvability allows for its use for protecting surfaces without subsequent de-conservation before further operations or before final surface varnishing, utilizing modern dispersion acrylate paints. The KONKOR 437 conservation product is highly abundant. It does not contain any crude oil hydrocarbons. It is well biodegradable. It can be applied in standard ways - submersion, painting and spraying, provided the temperature is above freezing. KONKOR 437 is supplied as a 5% solution.

CONSERVATION AGENTS IN SPRAY (400ML)

Trading name


40 °C in [mm2/s]

PM flash point min.

[°C]

Content of VOC

substances [weight %]

Density at 15 °C

Specification

MOGUL KONKOR 210 SPRAY 0.1 - 40 740 ISO 6743/8 R

KONKOR 210 SPREJ is a mixture of a high-quality mineral oil and corrosion inhibitors. The mixture quickly and effectively penetrates and conserves. It combines the characteristics of multiple products. The synergy of a powerful conservation oil and an evaporable component makes the conservation oil more versatile when it comes to its usability. Suitable as a workshop spray lubricant.

MOGUL KONKOR 315 SPRAY 0.2 - 88 730 ISO 6743/8 R

KONKOR 315 SPREJ flawlessly cleans and conserves handguns. It effectively removes after-shot combustion products from the blast hole in the barrel, thus securing one of the main conditions of accurate shooting. KONKOR 315 SPREJ is used not only in industry and for weapon manufacturing, but also in sports, especially as a lubricant for transmission mechanisms. It can penetrate to even very tight joints, thus being able to release corroded and stuck bolts, hinges or locks.

MOGUL KONKOR CLEAN SPRAY 0.2 - 93 720 ISO 6743/8 R

KONKOR CLEAN SPRAY is a professional, fast-cleaning and degreasing spray. KONKOR CLEAN is particularly designated for removing oils, plastic lubricants, workshop pollutants and waxes. Thanks to its excellent penetration abilities, it penetrates even to the narrowest locations. It also helps with seized or stuck connections. After degreasing, it can also be used for short-term conservation. Upon application, the product fast evaporates and leaves the surface clean and free of any corrosion signs. The product can be used for cleaning all types of metal materials, including surfaces that contain moisture.

CONSERVATION AGENTS

29

EVAPORABLE CONSERVATION AGENTS

Trading name


40 °C in [mm2/s]

PM flash point min.

[°C]

Content of VOC

substances [weight %]


20 °C [kg/100m2]

Specification

MOGUL KONKOR 305 2.0 55 90 0.2 ISO 6743/8 RFF

KONKOR 305 is an evaporable conservation product. Isoparaffin is the diluting component. Its conservation effect is based on a mixture of corrosion inhibitors, components that displace water and a barrier formed by a high-viscosity oil. It is designated for corrosion protection of a wide range of machinery products. It can be used for interoperative conservation of workpieces from ferrous and nonferrous and precious metals, as well as for protecting final products prior to being packed in their packages. The product is known for an excellent ratio of the achievable protection time and a very low consumption rate. The product can be applied by painting, soaking or spraying. Since the film is very thin, traditional procedures can be used for de-conservation, for example, rinsing by a warm solution of detergents in water (alkali washing) or organic solvents.


KONKOR 315 is a protective conservation and lubrication product with an evaporable component (isoparaffin). Its conservation effect is based on a selected mixture of corrosion inhibitors, components that displace water and a barrier formed by a high-viscosity oil. It is designated for medium-term corrosion protection of a wide range of machinery products. It complies with the requirements for the conservation of long and short guns (blackened and varnished). KONKOR 315 has been primarily proposed as a final conservation agent for conserving guns for shipping. However, apart from that, it is also usable for cleaning and lubricating bicycle chains and for additional lubricating of the Al shaping processes.


KONKOR 350 is a evaporable conservation agent based on a suitable corrosion inhibitor, oxidised esters, paraffins and mineral spirits. It is designated for conserving machines, individual machine parts, tools and individual metal materials when stored outside, and for conserving parts stored in seaside areas and transported on seas. Once the solvent evaporates, a flexible layer remains on the conserved material. We recommend to stir the product prior to its use when it has been in storage for more than 6 months. De-conservation can be executed by rinsing using cold detergents, mineral spirits, kerosine (diesel oil), chlorinated hydrocarbons or in a water steam flow.

MOGUL KONKOR 612 12.5 65 45 1.2 ISO 6743/8 REE

KONKOR 612 and KONKOR 622 are high-quality conservation mineral oils that contain suitable, complex corrosion inhibitors, effectiveness of which is supported by oxidised petroleum jelly and an evaporable component. Once KONKOR 612, 622 evaporates, a continuous oil-Vaseline protective film remains on the surface of the conserved part. This film withstands the impact of corrosion environments. KONKOR 612, 622 does not lose its protective anticorrosion characteristics even when the temperature changes at a high relative humidity.

MOGUL KONKOR 622 23.5 56 35 2.8 ISO 6743/8 REE

Conservation oils of the KONKOR 612 and KONKOR 622 lines are designated for medium- to long-term anticorrosion protection of products made of ferrous and nonferrous metals (especially bearings, tools, measuring devices, shafts, cogged wheels, joint materials, sheet metals, etc.). The conservation film is applied by soaking, spraying or painting. It is recommended to let the excess oil drip off from the surface after the application. The protective film easily dissolves in lubrication oils and does not have to be removed when additional conserved parts are applied. If necessary, the protective film can be removed using standard alkali degreasers and organic solvents.

PLASTIC LUBRICANTS

30

PLASTIC LUBRICANTS

Plastic lubricants are divided into consistency levels (classes), which are usually stated directly, as a part of the marking of every PL. The basis for determining consistency of any lubricant is its penetration (i.e. hardness degree), which can be measured accurately. It usually applies that soft plastic lubricants of classes 000, 00, 0 and 1 are most often used for lubricating gears or central lubrication systems with long transport routes (grease lines), while lubricants with a consistency of 2, 3 and 4 are used for lubricating rolling and sliding bearings. Products with a higher consistency are suitable as additional sealing (and possibly lubricating) agents for labyrinth and other sealings, taps, valves, etc.

Determining cone penetration - ČSN ISO 2137

PL penetration at 25 °C [1/10 mm]

Consistency class

PL consistency (appearance)

PL penetration at 25 °C [1/10 mm]

Consistency class

PL consistency (appearance)

445 - 475 000 liquid 220 - 250 3 medium

400 - 430 00 semiliquid 175 - 205 4 semisolid

355 - 385 0 very soft 130- 160 5 solid

310-340 1 soft 85-115 6 very solid

265 - 295 2 semisoft

PLASTIC LUBRICANTS - Performance classification ISO 6743/9

This classification system ISO-L-X- (letter X characterizes the product group - plastic lubricants) - characterizes every PL using four code letters and numbers, which determine the given lubricant consistency. Individual letters describe important application characteristics of every classified product. The 1st symbol characterizes the bottom limit of its temperature usability, the 2nd symbol its upper limit, the 3rd symbol determines resistance of the lubricant to water and its protection degree against corrosion. The 4th symbol determines presence or absence of high-pressure (EP) additives and the 5th symbol specifies NLGI consistency.

1st SYMBOL A B C D E

2nd SYMBOL A B C D E F G

Minimal operation

temperature °C

0 -20 -30 -40 below -40

Maximal operation

temperature °C

60 90 120 140 160 180 over 180

3rd SYMBOL Resistance to water Protection against corrosion 4th SYMBOL Description

A for a dry environment does not protect A

It does not have improved high-pressure characteristics B for a dry environment for distilled water

C for a dry environment for salt water B

It has high-pressure characteristics (EP) D resistant to static humidity does not protect

E resistant to static humidity for distilled water 5th SYMBOL – NLGI consistency

F resistant to static humidity for salt water

G resistant to water washing does not protect

H resistant to water washing for distilled water

I resistant to water washing for salt water

Example: The marking of the plastic lubricant - ISO-L-X-BCGB2 means that it is PL, usable within the range of -20 °C (B) and

120 °C (C), which resists water well, however, which has a low level of protective characteristics against corrosion (G), furnished with thigh-pressure (EP) additives (B), having a consistency of 2.

1st SYMBOL - minimal operation temperature 2nd SYMBOL - maximal operation temperature

3rd SYMBOL - resistance to water and protection against corrosion 4th SYMBOL - high-pressure characteristics

PLASTIC LUBRICANTS

31

PLASTIC LUBRICANTS - Performance classification DIN 51 502

The PL classification system is specified in standard DIN 51 502 and in other standards. PL are assigned to four basic application groups (symbol 1). Additional letters in the marking characterize the volume of additives in the lubricant (symbol 2), the number expresses lubricant consistency (NLGI-symbol 3), the subsequent letter symbol characterizes the product’s upper temperature usability limit and its resistance to water, and finally the last number of the marking directly specifies the bottom temperature limit of its usability. 1st SYMBOL - application designation of the lubricant 2nd SYMBOL - additives in the lubricant

Marking Application designation of the lubricant

Marking Application designation of the lubricant

K Plastic lubricants for rolling and sliding

bearings and for sliding surfaces F

Solid lubricant additives (MoS2, graphite, Teflon, etc.)

G Plastic lubricants for enclosed

transmissions

L Anticorrosion additives

P High-pressure additives

OG Plastic lubricants for open gears 3rd SYMBOL – NLGI consistency

M Plastic lubricants for sliding bearings

and for sealings

4th SYMBOL - maximal operation temperature °C and resistance to water

Marking Maximal operation temperature [°C] Resistance to water (degree - trial temperature) pursuant to

DIN 51 807

C 60 0-60 or 1-60

D 60 2-60 or 3-60

E 80 0-60 or 1-60

F 80 2-60 or 3-60

G 100 0-90 or 1-90

H 100 2-90 or 3-90

K 120 0-90 or 1-90

M 120 2-90 or 3-90

N 160

P 160

R 180 as agreed

S 200

T 220

U over 220

Assessed degree of the resistance to water: 0 - no changes; 1 - small changes; 2 - medium changes; 3 - powerful changes

5th SYMBOL - minimal operation temperature °C

Numerical marking

Minimal operation temperature [°C]

-10 -10

-20 -20

-30 -30

-40 -60

-50 -50

-60 -60

Example: The marking of the plastic lubricant - KP2K-30 means that it is a multipurpose lubricant (K) with EP additives (P), with a

consistency class of 2, which can be used within the range of -30 and 120 °C and which resists the impacts of water very well (K).

PLASTIC LUBRICANTS

32

PLASTIC LUBRICANTS - STABILIZER CALCIUM SULFONATE COMPLEX

Trading name NLGI Stabilizer Base oil viscosity [mm2/s]

Operation temperature

[°C]

Classification ISO 6743/9

X

Classification DIN 51 502

MOGUL CALSUL 2 WR 2 Calcium

sulphonate complex

200 -25 to 150

(180) BDIB2 KP2N-25

High-pressure plastic lubricant designated for lubricating antifriction and slide bearings, particularly in demanding conditions; fittings exposed to extreme loads and fittings operating in water (including salt water) - high resistance to water washing and at high temperatures for prolonged periods of time (lubricating in the metallurgical and mining industries, lubricating machining tools, undercarriages that pass through water, excavators, off-road vehicles, maritime transport, etc.)

PLASTIC LUBRICANTS - STABILIZER LITHIUM COMPLEX



[°C]


X


MOGUL LC 2 2 Li complex 210 -30 to 150

(180) CDIB2 KP2N-30

Multipurpose, high-temperature, high-pressure plastic lubricant designated for lubricating antifriction and slide bearings, particularly in demanding conditions; fittings exposed to extreme loads and fittings operating at high temperatures for prolonged periods of time (rolling and sliding bearings, exposed to high temperatures of up to 150 °C for prolonged time periods, or up to 180 °C occasionally or when lubricant is being permanently added).

PLASTIC LUBRICANTS - LITHIUM STABILIZER



[°C]


X


MOGUL LA 2 2 Li 120 -30 to 120 CCEB2 KP2K-30

Universal, high-pressure plastic lubricant designated for lubricating rolling and sliding bearings in the automotive sector and industry (especially long-term fillings).

MOGUL LA2 D 2 Li 130 -30 to 120 CCEB2 KP2K-30

High-pressure, highly adhesive plastic lubricant, especially for environments with demanding requirements for the lubricant adhesion (pegs, sliding and rolling bearings, slow- to medium-speed open gears, etc.)

MOGUL LA 00 00 Li 45 -35 to 100 CBEB00 GP00G-30

Semiliquid, high-pressure plastic lubricant specifically designated for being used in central lubrication systems of trucks and buses with long grease lines. It has a good pumpability even at low temperatures.

PLASTIC LUBRICANTS

33

PLASTIC LUBRICANTS - LITHIUM STABILIZER



[°C]


X


MOGUL LV 2-3 2-3 Li 50 -30 to 120 CCEA 2/3 K2/3K-30

Universal plastic lubricant for lubricating rolling and sliding bearings that are not exposed to high pressures. Unsuitable for central lubrication systems.

MOGUL LVS 1 1 Li 110 -25 to 120 BCEA 1 K1 K-25

MOGUL LVS 2 2 Li 110 -25 to 120 BCEA2 K2K-25

MOGUL LVS 3 3 Li 110 -25 to 120 BCEA 3 K3K-25

Multipurpose plastic lubricants particularly designated for industrial use. Suitable for rolling and sliding bearings that operate in standard operation conditions. They are known for an increased base oil kinematic viscosity. MOGUL LVS 1 is particularly

designated for central lubrication systems. Thanks to its increased oil kinematic viscosity, MOGUL LVS 2 allows for higher loads when compared to MOGUL LV 2-3. MOGUL LVS 3 is particularly used for fast-running bearings (ventilators) or

bearings installed on vertical shafts.

MOGUL UNI NH 2 2 Li 120 -30 to 120 CCEB2 KP2K-30

Universal plastic red lubricant, particularly designated for lubricating a wide spectrum of rolling and sliding bearings exposed to medium to increased loads.

MOGUL LV 2 EP 2-3 Li 50 -30 to 120 CCEB2/3 KP2/3K-30

MOGUL LV 2 EPS 3 Li 50 -30 to 120 CCEB3 KP3K-30

High-pressure plastic lubricants designated for lubricating rolling and sliding bearings exposed to high loads and other moving parts exposed to loads. MOGUL LV2 EPS is particularly designated for lubricating railway axle bearings. Unsuitable

for central lubrication systems.

MOGUL LV 00 EP 00 Li 200 -25 to 100 BBEB00 GP00G-20

High-pressure plastic lubricant particularly designated for lubricating transmissions of all types, which require a semiliquid lubricant. It is also suitable for lubricating sliding and rolling bearings exposed to high loads when applied using central lubrication systems (long grease lines of small diameters).

MOGUL LVT 1 EP 1 Li 200 -25 to 120 BCEB 1 KP1 K-25

MOGUL LVT 2 EP 2 Li 200 -25 to 120 BCEB2 KP2K-25

High-pressure plastic lubricants designated for lubricating rolling and sliding bearings exposed to high loads and other moving parts exposed to loads. They are known for a high base oil viscosity and thus an increased capacity of the lubrication film. MOGUL LVT 1 EP is suitable for central lubrication systems with long grease lines.

PLASTIC LUBRICANTS

34

SPECIAL PLASTIC LUBRICANTS - LITHIUM STABILIZER



[°C]


X


MOGUL LV 2 WR 2 Li 110 -20 to 120 BCHB 2 KP2K-20

High-pressure plastic lubricant resistant to water washing, designated for lubricating rolling and sliding bearings and sliding surfaces in environments that experience excessive impacts of squirting liquids, including machining liquids. It is also used as an assembly lubricant for easy dismounting of joints exposed to the impact of machining liquids.

MOGUL LVT 2 M 2 Li 200 -25 to 120 BCEB 2 KFP2K-25

High-pressure plastic lubricant with an increased volume of MoS2 and a high base oil viscosity. It is particularly designated for lubricating slide, but also antifriction bearings exposed to extreme loads (pressures, vibrations, impacts). Demanding lubrication applications - sliding bearings of bucket-wheel excavators, pegs of diggers in combination with a jackhammer, etc.). It is also suitable when the so-called “emergency” lubricant characteristics are required.

MOGUL LVG 2 2-3 Li 50 -30 to 120 CCEB2/3 KF2/3-30

MOGUL MOLYKA G 2-3 Li 50 -30 to 120 CCEB2/3 KF2/3-30

Plastic lubricants with added solid lubricants, particularly designated for lubricating rolling and sliding bearings exposed to high loads and other moving parts exposed to loads. It is suitable when the so-called “emergency” lubricant characteristics are required. MOGUL LVG 2 contains graphite. MOGUL MOLYKA G contains MoS2 and graphite.

MOGUL PZOP 0 Li 250 -20 to 90 BBEA 0 G0E-20

Plastic lubricant particularly designated for lubricating leaking, enclosed transmissions of mobile devices (cone gears of rotational lawn mowers) and some industrial transmissions exposed to small loads.

MOGUL LP 00 00 Li 300 -20 to 90 BBEB 00 GFP00E-20

Semiliquid, high-pressure plastic lubricant, specifically designed for enclosed transmissions exposed to high loads; for example, terminal transmissions of locomotives etc. It contains graphite.

PLASTIC LUBRICANTS

35

PLASTIC LUBRICANTS - ALUMINIUM STABILIZER



[°C]


X


MOGUL A 00 00 AI 350 -20 to 90 BBHA 00 G00G-20

Highly adhesive, ductile lubricant particularly designated for lubricating slide bearings of mobile technologies (greasing lubricant); generally designated for bearings exposed to an intense impact of water (for example, vertical pegs) or some slow-running transmissions etc.

PLASTIC LUBRICANTS - CALCIUM STABILIZER



[°C]


X


MOGUL N 000 000 Ca 20 -30 to 60 CAEA000 K000C-30

Special plastic lubricant particularly designated for lubricating locomotive flanges or sliding bearings exposed to small loads.

MOGUL N 1 1-2 Ca 15 -30 to 50 CAGA 1 /2 K1/2C-30

Plastic lubricant designated for lubricating sliding and rolling bearings that operate at low pressures within a limited range of temperatures, including environments with increased humidity. Particularly suitable for bearings lubricated centrally, using long grease lines.

MOGUL K 3 2-3 Ca 50 -30 to 70 CAHA 2/3 K2/3C-30

M0GUL A 4 4 Ca 50 -25 to 80 CAHA 4 K4E-25

Plastic lubricants designated for bearings exposed to a direct contact with water, and for sliding and rolling bearings exposed to low to medium loads.

MOGUL G 3 3 Ca 50 -30 to 70 CAHB 3 KF3C-30

Plastic lubricant particularly designated for sliding and rolling slow-running bearings that can work in a wet environment (turntables, slide-out arms, etc.) It contains graphite.

PLASTIC LUBRICANTS

36

EASILY BIDEGRADABLE PLASTIC LUBRICANTS



[°C]


X


MOGUL EKO L2 2 Ca 130 -20 to 80 BBEB2 KP2E-20

High-pressure, semisynthetic plastic lubricant, particularly designated for lubricating all movable fittings that work in a wet environment or in a direct contact with water, for example, lubricating undercarriages of mobile machines that operate in environmentally protected areas - it replaces crude oil plastic lubricants.

MOGUL EKO V - AI - -15 to 50 - -

Special plastic lubricant designated for loss-occurring lubrication of railroad switches.

MOGUL EKO-V-PS - AI - -20 to 80 - -

Special semisynthetic plastic lubricant designated for loss-occurring lubrication of railroad switches. It is partially formulated based on synthetic ester - it is more resistant to climatic conditions (polymerization does not occur during the summer months).

MOGUL EKO V - AI - -15 to 50 - -

Special plastic lubricant designated for loss-occurring lubrication systems - especially for lubricating railway vehicle flanges (locomotives, trams, etc.) It contains graphite.

MOGUL EKO OK-PS - AI - -20 to 80 - -

Special semisynthetic plastic lubricant designated for loss-occurring lubrication systems - especially for lubricating railway vehicle flanges (locomotives, trams, etc.) It is partially formulated based on synthetic ester, which provides a greater thermal resistance and better lubricant stability. It contains graphite.

SOLID LUBRICANTS AND VASELINES

37

SOLID LUBRICANTS AND VASELINES

Trading name Product characteristics

MOGUL MOLYKA R

Solid lubricant in the form of powder molybdenum disulfide (MoS2), used for lubricating movable parts, additional lubrication of which is either difficult or impossible (joints, taps, etc.). For finishing surfaces of dismountable joints, particularly at high temperatures and in aggressive environments (creation of a separation layer). Also as an aid for metal pulling and pressing. Usability temperature of up to approximately 350 °C.

MOGUL MOLYKA paste

Mixture of molybdenum disulfide (MoS2) and a mineral oil. It is particularly used for sliding bearings exposed to high loads, for lubricating machine parts with occasional movements and difficult additional lubrication. It is also used as a separation agent for, for example, lubricating dismountable screw joints exposed to thermal loads. Usability temperature of up to approximately 350 °C. It is not suitable for rolling bearings.

MOGUL Vaseline - yellow Mixture of semisolid, saturated hydrocarbons obtained from crude oil. It is especially used for technological purposes. In some instances it can also be used for lubricating, resp. conserving electric contacts.

MOGUL KORON L conservation Vaseline

Conservation Vaseline designated for a long-term protection or metal and cast parts and devices against atmospheric corrosion in mild climatic zones. Best applied when heated by painting, spraying ore soaking.

* The product is classified as hazardous pursuant to Directive of the European Parliament and Council No. 1272/2008 (CLP). More information can be found on the current data safety sheet at www.mogul.cz.

OILS AND LUBRICANTS REGISTER

38

OILS AND LUBRICANTS REGISTER

Group name Page

number Group name

Page number

Group name Page

number

MOGUL HVLP-D 4 MOGUL K 11 MOGUL EOPS 22

MOGUL HV 4 MOGUL ON-3 12 MOGUL ERO 23

MOGUL HMS 5 MOGUL ONF 12 MOGUL SYNT 23

MOGUL HMZF 5 MOGUL ON 5 12 EMULSION MODIFICATIONS 23

MOGUL H-LPD ZF 5 MOGUL KOMPRIMO ONC 12 MOGUL TK 24

MOGUL H-LPD 6 MOGUL R2 12 MOGUL TERM 26

MOGUL HFC 6 MOGUL INTRANS SYNT 13 MOGUL KONKOR 27

MOGUL OT-HP3 6 MOGUL CLP 13 KONKOR SPRAY 28

MOGUL ON-1 6 MOGUL PP 13 MOGUL CALSUL 2 WR 28

MOGUL HEES 7 MOGUL P 14 MOGUL LC 32

MOGUL INDICATOR 7 MOGUL B 14 MOGUL LA 32

MOGUL DEFOAMER 7 MOGUL OD 14 MOGUL LV 33

MOGUL OL-P 8 MOGUL TRAFO 15 MOGUL LVS 33

MOGUL OL-J 8 MOGUL MK 16 MOGUL LVT 33

MOGUL OL-B 8 MOGUL SEPAR 16 MOGUL MOLYKA 34

MOGUL OLN-J 8 MOGUL MKS 16 MOGUL A 35

MOGUL MULTI 9 MOGUL BIO-CON 16 MOGUL N 35

MOGUL GLISON 9 MOGUL CUT OC 18 MOGUL K 35

MOGUL KV 9 MOGUL CUT 18 MOGUL EKO 36

MOGUL TB EP 10 MOCUL SPEEDCUT 19 MOGUL MOLYKA PASTE 37

MOGUL TB S 10 MOGUL UNICUT 20

MOGULTB 10 MOGUL CUT GRIND 20

MOGUL KOMPRIMO SYNT

11 MOGUL EPK 21

MOGUL KOMPRIMO VDL 11 MOGUL PRESS 21

NOTES

DISTRIBUTION WAREHOUSES

PARAMO, a.s.

Přerovská 560

530 06 Pardubice

666 810 111

666 335 019

PARAMO, a.s.

Skyřická 9

636 01 Most – Velebudice

676 106 909

676 106 885

PARAMO, a.s.

Opavská 25/51

768 01 Hlučín

595 066 616

595 066 618

PARAMO, a.s. , Kolín Centre

Ovčárecká 316

280 26 Kolín V

321 750 111

321 750 688

PARAMO, a.s.

Lípa u Zlína 275

736 11 Zlín 11

577 901 051

577 901 087

REGIONAL SALES REPRESENTATIVES

CENTRAL AND EASTERN BOHEMIA SOUTHERN AND NORTHERN MORAVIA

736 516 526

321 750 688

[email protected]

736 507 115

383 326 578

[email protected]

NORTHERN, WESTERN AND SOUTHERN BOHEMIA

736 507 107

577 901 087

[email protected]

Issued by joint stock company PARAMO in 2020 All photographs are for illustrative purposes only

PARAMO, a. s.,

Přerovská 560, 530 06 Pardubice tel.: 466 810 111, fax: 466 335 019

email: [email protected] www.paramo.cz

ESHOP www.mogul.cz

OILS AND LUBRICANTS - Paramo

Documents

Transcript of OILS AND LUBRICANTS - Paramo