ZLA series double-stages vacuum high efficiency vacuum oil purifier is special equipment for dehydration, degassing, purification process of various kinds of insulating oils in electrical transformers and circuit breakers etc.

Application

ZLA series is widely used in purification of all kinds of insulating oil, especially the fine purification treatment of high-grade new oil, imported oil and super-voltage transformer oil. It can be used for onsite operation in over 110KV transformers.

ZLA series also can be used as dehumidification equipment for a variety of electric facilities. It is widely used for oil filling for transformers and circuit breakers under vacuum condition. It is also suitable for high- efficiency purification process for other low-viscosity lubricating oils.

Characteristics

Double-stages, high vacuum pressure and high flow rate that help remove water, air, gases, solid particulates and other impurities from oil quickly and efficiently so as to improve the breakdown voltage of oil and maintain its insulating property.

Advanced dehydration and degassing system that uses large area three-dimensional flash distillation technique to remove harmful composition in the oil, such as water, air and gases.

Fine multi-stage filtration helps remove mechanical impurities in oil; high-quality filter element is of corrosion proof, strong mechanical strength and wear resistance.

Sensitive automatic pressure protection device and infrared oil level control system make the operation even easy, simple and safe.

It possesses the function of vacuuming electrical equipment and oil filling under vacuum condition. It can be used to treat low-viscosity lubricating oils. It is more efficient than other single-stage vacuum oil purifier.

Sensitive automatic pressure protection device and infrared oil level control system make the operation even easy, simple and safe.

It possesses the function of vacuuming electrical equipment and oil filling under vacuum condition. It can be used to treat low-viscosity lubricating oils. It is more efficient than other single-stage vacuum oil purifier.

Models and Main Technical Parameters Model ZLA-30 ZLA-50 ZLA-75 ZLA-100 ZLA-150 ZLA-200 ZLA-300 ZLA-500 ZLA-1000

Flow Capacity (L/h) 1800 3000 4500 6000 9000 12000 18000 30000 60000

Heating Power (kw) 50 62 74 95 98 108 156 225 450

Total Power (kw) 58 71 84 100 109 119 173 257 511

Inlet(outlet) Dia.(mm) 25 32 40 40 50 50 65 80 100

Dimensions(mm)

L 1380 1500 1750 1900 2100 2300 2600 3200 3600

W 1100 1200 1250 1280 1300 1300 1380 1500 1600

H 1600 1650 1650 1700 1800 1850 1950 2100 2300

Net Weight (kg) 600 800 900 1050 1500 1800 2200 3960 4980

Main Technical Data Guarantee Performance Index Vacuum Range -990 ~ -920 mbar Lubricating Oil Before

Treatment After One Time Treatment After the Treatment of few Times

Working Pressure ≤ 0.5MPa Water Content in the Oil ≤ 50PPm D 8PPm D 3PPm

Working Temperature 45~80℃ Gas Content in the Oil ≤ 12% D 0.3% D 0.1%

Power Supply 380V 50Hz 3phase Flash Point ≤ 135℃ ≥135℃ ≥155℃

Filtration precision 1~5μm Dielectric Strength≤ 35kv D 65kv ≥75kv

ZL series single stage vacuum oil purifier special equipment to purify de-electrical or insulating oil of electric transformers and circuit breakers in many electrical generation plants, transformer stations, factories, mines and other enterprises.

ZLQ automatic computerized high efficiency vacuum oil purifier and ZLZ high efficiency intelligent supervising vacuum oil purifier have all the basic functions of ZL series, but they are suitable for special conditions.

Application

It can be applied to purification process of transformer oil, circuit breaker oil, switch oil and capacitor oil as well as low-viscosity lubricating oil.

It can efficiently remove water, air, gases, and other impurities from oil and enhance its breakdown voltage.

It can be used on-line and onsite without interference of power supply or replacement of fresh new oil.

Characteristics

It adopts large-area three-dimension flash distillation technique for unique, high efficiency dehydration and degassing process.

Safe electric heating system ensures even heating and constant oil temperature. Precise fine multi-stage filtration system: The element is of high quality material, with big capacity of

containing pollutants, good mechanic strength. Advanced pressure protection device and infrared oil level control system, simple and safe in operation. The equipment adopts chain control system in draining water and gas. No oil leaking

from the outlet of vacuum pump, which will extend the life of vacuum pump.

This machine can be used together with BZ transformer oil regenerating equipment to get rid of acid, dyes, free carbon, etc.

Main Technical Data Guarantee Performance Index Vacuum Range -0.07~-0.095MPa Lubricating Oil Before

Treatment After One Time Treatment After the Treatment of few Times

Working Pressure ≤ 0.5MPa Water Content in the Oil ≤ 50PPm ≤ 20PPm ≤ 5-8PPm

Working Temperature 50~75℃ Gas Content in the Oil ≤ 12% ≤ 3% ≤ 0.2%

Power Supply 380V 50Hz Flash Point ≤ 135℃ ≥135℃ ≥135℃

Filtration precision 1~5μm Dielectric Strength≥35kv ≥45kv ≥50-55kv

Models and Main Technical Parameters Model ZL-6 ZL-8 ZL-10 ZL-20 ZL-30 ZL-50 ZL-75 ZL-100 ZL-150 ZL-200 ZL-300 ZL-500 ZL-1000

Flow Capacity (L/h) 360 480 600 1200 1800 3000 4500 6000 9000 12000 18000 30000 60000

Heating Power (kw) 6 6 9 15 18 30 42 54 72 90 135 198 396

Total Power (kw) 7 7 10 17 20 33 46 59 79 98 146 215 448

Inlet(outlet) Dia.(mm ) 15 15 15 20 25 32 40 40 50 50 65 80 100

L 750 800 950 1100 1150 1200 1300 1600 1700 1850 1950 2000 2200

W 600 600 650 750 750 850 900 1080 1180 1200 1200 1200 1500

Dimensions(mm) H 950 1000 1050 1350 1450 1600 1600 1650 1700 1850 1900 2100 2250

Net Weight (kg) 100 110 150 200 230 300 380 460 600 750 980 1600 2300

BKL series appropriate for transformer load tap changer oil and circuit breaker oil. It has become a kind of standard equipment that can be installed together with the transformer load tap changer.

As a by-pass oil recycling equipment, BKL series transformer LTC oil purifier can treat insulating oil online without interference of power supply, and remove water, air, gases, free carbon and oxidant so as to ensure the quality of oil. It can also extend the service life of LTC, cut short time of equipment maintenance and changing oil, and lower the cost, all these make the transformer operation more stable, economical and simple.

Characteristics

The machine uses three separation methods: liquid-liquid separation, liquid-solid separation, and liquid-gas separation technique.

No bubbles or foams are produced during operation. The compounded filter element can not only filter solid impurities, but also efficient for dehydration,, de-

acid and keep high breakdown voltage property and extend the service life of oil. You can pre-set its operation mode. You may set the oil purifier in auto start together with the operation

of LTC, or it can be controlled automatically at a pre-set time every day. Besides, you can also operate it manually.

In the oil purifier the motor and pump are put together. It is small in size, well sealed without leaking, low-noise and suitable to work at night. The machine adopts pressure protection device, convenient to observe the filter element in oil purifier

and easy for cleaning. Major parts are imported and of reliable quality and long service life. The operation is steady and

reliable.

Models and Main Technical Parameters Model BKL-10 BKL-15

Power Supply 50Hz 380V(3 phases, 4 wire)

Motor Power (kw) 0.37 0.55

Filtration Area(㎡ ) 4.2

Flow Rate (L/min) 10 15

Filtration Fineness (μm) ≤3 ≤3

Filtration Capacity Black Lead 400g Water 200ml

Filtration Pressure (Mpa) ≤0.5 ≤0.5

Overall Dimensions (mm) 588×530×920 620×550×980

Net Weight (kg) 215 260

TL series turbine oil purifier adopts the latest advanced technology and gathers in itself the technique of gravity settlement, coalescence-separation, absorbing, centrifugal separation, pressure filtering etc. It is an ideal equipment to treat turbine oil, low viscosity lubricating oil and hydraulic oil on-line.

Application

TL series can be commonly used for on-line turbine oil filtration in power generation, metallurgy and chemical engineering industries.

t is good at emulsion breaking, dehydration and removing soap, gelatine, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil as well as turbine oil used in other machinery and electrical equipment.

Characteristics

Adopting coalescence separation technique and three-dimensional flash distillation technique, it has strong ability to break emulsion and remove water from the oil.

Optimized electric heating system with automatic constant temperature controller ensures the oil temperature to be even and stable.

Advanced infrared oil level control system and pressure protection device make operation simple and safe. It can purify all kinds of turbine oil used in steam turbine and water turbine online and onsite.

Air cooling system helps cool down air and gases from the flash distillation chamber so as to extend the service life of vacuum pump and avoid the inconvenience of water cooling.

The machine can also be installed with digital flow meter and timer to calculate and record the volume of output oil and working hours (it’s optional).

Aluminium electric control cabinet has the merits of heat conducting and anti-explosion. The automatic series model has the following merits:

Automatic oil purifier series is installed with PLC (programmable logical computer system), which can control the equipment automatically to every stage of its process and ensure its safe operation on site and on line without human supervision.

The equipment is installed with auto alarming system, it will give out alarm and stop the whole machine when electrical motor is overloaded, vacuum pump and oil pump overloaded, heater overloaded and pressure abnormal.

The equipment is installed with auto control of vacuum pressure, auto drainage of water from the equipment.

Models and Main Technical Parameters Model TL-10 TL-20 TL-30 TL-50 TL-75 TL-100 TL-150 TL-200 TL-300 TL-500 TL-1000

Flow Capacity (L/h) 600 1200 1800 3000 4500 6000 9000 12000 18000 30000 60000

Heating Power (kw) 12 18 24 30 42 48 60 72 108 180 315

Total Power (kw) 14 21 27 34 46 53 67 81 119 197 368

Inlet(outlet) Dia.(mm 15 20 25 32 40 40 50 50 65 80 100

L 1280 1300 1350 1380 1400 1450 1500 1700 1850 2360 2800

W 800 900 900 1050 1050 1100 1150 1350 1450 1850 2100

Dimensions(mm) H 1500 1600 1650 1700 1700 1750 1800 1800 1800 2000 2100

Net Weight (kg) 330 350 380 480 600 760 960 1200 1500 2800 3880

Main Technical Data Guarantee Performance Index Vacuum Range -0.06~-0.095MPa Kinematic Viscosity

(mm/sec) GB/T265

Working Pressure ≤ 0.5MPa Water Content in the Oil ≤100PPm

Working Temperature 40~80℃ Flash Point >172℃(GB/T3536)

Power Supply 50Hz 380V Demulsifying Value ≤8min (GB/T305)

Filtration precision 3~10μm Mechanical Impurity 0 (GB/T511)

Oil Appearance Clean and Transparent

Application

ZSY series Waste Oil Regeneration System is used to purify the waste engine oil which can be efficient for removing the abrasive dust, foundry sand, impurities, moisture, organic acid and inorganic acid from the waste engine oil and remove carbon particles, deteriorated oxide etc..

Functions

Break the emulsion and improve the colour of the oil. Recover the oil's property and improve the engine oil's operation performance Reduce the abrasiveness and assure the engine oil lubricating system operate normally. Save the cost of oil and save the fuel resource It can be widely used in oil field, mine, metallurgy, electric power, traffic, manufacturing to filter

hydraulic oil, machinery oil, cooling oil and engine oil which is used in vessel and automobile for oil regeneration purification treatment.

Characteristics

Strong ability of filtering impurities Referred to the characteristics of the waste engine oil, with heavy particle sand, much impurities, badly

dirty oil, it combines magnetic filtration with densification filtration step by step. It can remove the water and other harmful air in the oil. Adopted step air-cooling and waste air filtration to deal with the mixed air which is pumped. Increased

the equipment's effective output, prolonged the life-span of the vacuum pump. It is not only protecting the vacuum pump, but also protecting the environment.

The system has the advantages of pressure mechanical filtration, vacuum filtration and centrifugal filtration. It is not only overcome the disadvantage of plate oil purifier, but also can reduce the acid, degassing and breaking emulsion that normal vacuum oil purifier and centrifugal oil filtration cannot do.

Adopted advanced fuzzy oil heating device, set upper and lower limits of the oil temperature discretionarily.

It monitors the temperature, pressure, vacuum degree, power cut, overpressure and low-voltage, prevents from the accidents effectively, and assures the machine can operate well.

Models and Main Technical Parameters Model Units ZSY-I ZSY-II ZSY-III ZSY-IV

Production capacity ton/day 2 tons 4 tons 8 tons 12 tons

Rate of recycle % 70-90%

Work pressure Mpa ≤ 0.4

Vacuum range Mpa -0.06 ~ -0.095

Working temperature range °C 80 °C-180 °C

Work noise dB(A) ≤ 85

Electric heating power Kw 60 120 180 210

Inlet/outlet pipe diameter mm Dn32 Dn40 Dn50 Dn50

Gross weight kg 6000 9000 12000 15000

Dimension mm(LxWxH) 2200×1800×2200 3800×2100×2300 6000×2100×2300 8600×2100×2400

Power supply 380V 50Hz 3phase

DYJ series oil purifier is a kind of multi-functional equipment for dehydration, degassing, and purification process of lubricating oil. It is developed and manufactured to treat varieties of lubricating oils with deferent kinematic viscosity and flash point. It is ideal equipment for factories, mines and other industries to purify different kinds of lubricating oils. The double- stage and multi-stage oil purifiers are more efficient in their operation.

In view of customers’ special requirement, we have also developed DYJ-B series of semi-automatic lubricating oil purifier, DYJ-Q automatic multi-functional lubricating oil purifier and DYJ-Ex anti-explosion multi-functional lubricating oil purifier which are suitable to work in different conditions.

Characteristics

Super ability in breaking emulsion, dehydration and degassing process. Adopting big cubage, reinforced three-dimension flash distillation column, thin film evaporation technique and large area multi-level separation technique so as to remove water, gas and light hydrocarbon material efficiently and quickly.

Adopting high-quality filter elements and sealing material with corrosion proof, high temperature resistance and excellent mechanical strength, it is suitable even for purification process of high-viscosity oil under rather high temperature conditions and in this way expanding its field of application.

Fine and precision multi-stage filtration system can remove mechanical particulates thoroughly and effectively. With air-cooling and condensation system, it can cool the air in the vacuum system efficiently and quickly, which

avoids inconvenience of water- cooling. Advanced high pressure protection device and infrared oil level control system for easy operation. Perfect automatic and manual oil heating temperature controller, automatic cooling and separation device, simple,

safe and reliable. Aluminium electrical control cabinet with high efficiency for heat transfer and anti-explosion. The equipment can also be installed with digital flow meter and timer for auto calculating and recording oil

volume and working time. (it’s optional according to user’s requirement) The machine can be installed with two filtration systems for easy and quick change of filter element without

stopping the machine. Automatic oil purifier series is installed with PLC (programmable logical computer system), which can control the

equipment automatically to every stage of its process and ensure its safe operation on site and on line without human supervision.

The equipment is installed with auto alarming system, it will give out alarm and stop the whole machine when motor is overloaded, vacuum pump and oil pump overloaded, heater overloaded and pressure abnormal.

The equipment is installed with auto control of vacuum pressure, auto drainage of water from the equipment.

Models and Main Technical Parameters Model DYJ-10 DYJ-20 DYJ-30 DYJ-50 DYJ-75 DYJ-100 DYJ-150 DYJ-200 DYJ-300 DYJ-500 DYJ-1000

Flow Capacity (L/h) 600 1200 1800 3000 4500 6000 9000 12000 18000 30000 60000

Heating Power (kw) 18 24 36 42 54 60 84 108 156 225 450

Total Power (kw) 21 27 39 46 59 66 92 117 170 252 496

Inlet(outlet) Dia.(mm 15 20 25 32 40 40 50 50 65 80 100

L 1100 1200 1300 1400 1500 1500 1600 1650 1800 2200 2800

W 800 900 1050 1150 1250 1250 1300 1380 1450 1800 2000

Dimensions(mm) H 1550 1650 1800 1850 1850 1900 1950 1950 2000 2300 2500

Net Weight (kg) 380 430 560 680 880 1100 1500 1680 2200 3500 4600

Main Technical Data

Guarantee Performance Index

Vacuum Range -0.06~-0.095MPa Kinematic

Viscosity mm/sec GB/T265

Working Pressure ≤ 0.5MPa Water Content in the Oil % 0 (GB/T260)

Working Temperature 30~90℃ Flash Point ℃ GB/T3536

Power Supply 50Hz 380V Demulsifying Value min ≤8min (GB/T7305)

Filtration Fineness 5~20μm Mechanical Impurity % 0.03~0(GB/T511)

Cleanness 6~9 (NAS1638)

DFL series multi-stage back-washing oil purifier is newly developed, and can work continually online with multi-stage filtration, back-washing and waste drainage. It can meet the special requirement of large quantity of oil treatment, suitable for many kinds of lubricating oil, engine oil, diesel oil etc. DFL series is ideal equipment for online purification of all kinds of oil in factories and mines.

Application

DFL series is widely used in all kinds of industries of machinery, oilfield, chemistry mining, power generation, transportation, manufacturing etc. It can purify many kinds of oil effectively and thoroughly, such as deteriorated hydraulic oil, hydraulic transmission oil, gear oil, gasoline engine oil, diesel engine oil, to remove quickly the mechanic impurities and improve the quality of oil, and ensure the normal operation of hydraulic, motive and lubricating system of the equipment.

Characteristics

The sintered filter element with high precision can completely filter the fine solid particulates from the oil, withstand corrosion and high temperature, with good mechanic strength and service life. The element can be cleaned through back-washing technique conveniently.

Aluminium electrical control cabinet, better for heat transfer and anti-explosion. (Anti-explosion series).

The qualified filtration component and joint sealed material can resist corrosion, high temperature and have nice mechanic strength, all of which can widen the scope of the oil that is to be purified.

The machine is installed with a few exits for waste drainage, which can switch working unit freely, it can back-wash the filter element by stage without stopping the machine.

Guarantee Performance Index Performance Item Guarantee

Performance

Filtration Precision 5~20μm

Cleanness 6~8 (NAS1638)

Mechanical Impurity without (GB/T511)

Models and Main Technical Parameters Model DFL-500 DFL-1000 DFL-2000

Flow Rate (L/H) 30000 60000 120000

Working Pressure (Mpa) ≤ 0.5 ≤ 0.5 ≤ 0.5

Power Supply 50Hz 380V(3 phase, 4 wire)

Total Power (kw) 18 22 45

Inlet/Outlet Diameter (mm) 65 80 100

Oil Outlet Diameter (mm) 32 40 50

L 2500 2680 3280

Overall Diameter (mm) W 1000 1200 1350

H 1700 1900 2100

Net Weight (kg) 2000 2500 3600

KRZ Series fire-resistant oil purifier is developed and manufactured based on the characteristics of the fire-resistant oil, integrated with many types of purification and filtration technique, we have developed this special equipment for purification and regeneration process of fire-resistant oil in thermal power plants, chemical plants and other enterprises.

Characteristics

This equipment is functional to purify and regenerate deteriorated fire-resistant oil, effectively remove acid, pigment, water, air and other solid particulates.

This equipment is made of special materials to match the fire-resistant property of the oil. Beautiful appearance, easy operation, low noise and long service life. KRJ series Fire-resistant Oil Filtration & Oil Filling Equipment functions for the fine filtration

of oil on operation, removing mechanical particulates from oil. This equipment can also serve to transmit, filtrate, inject and discharge fire- resistant oil from

one container to another.

Models and Main Technical Parameters

Model KRZ-20 KRZ-30 KRZ-50 KRZ-100 KRJ-20 KRJ-30 KRJ-50 KRJ-100

Flow Rate (L/H) 1200 1800 3000 6000 1200 1800 3000 6000

Vacuum (Mpa ) -0.096 -0.096 -0.096 -0.096 / / / /

Working temperature (°C) 40~60 40~60 40~60 40~60 40~60 40~60 40~60 40~60

Water content (μ g/g) ≤ 0.01 ≤ 0.01 ≤ 0.01 ≤ 0.01 / / / /

Acid value (mgKOH/g) ≤ 0.05 ≤ 0.05 ≤ 0.05 ≤ 0.05 / / / /

Chlorine content (μ 1/1) ≤ 100 ≤ 100 ≤ 100 ≤ 100 / / / /

Particulates count (MOOG) 3 3 3 3 3 3 3 3

Appearance transparent transparent transparent transparent / / / /

Working pressure (Mpa) ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5

Pipe Dia. (mm) 20 25 32 40 20 25 32 40

Voltage (V) 220V/380V (50Hz) 220V/380V (50Hz)

Total power (kw) 10 16.56 19.5 33.5 9.8 16.1 19.1 32.2

L 1200 1360 1500 1600 550 600 650 750

W 850 950 1000 1200 450 480 500 550

Dimensions(mm) H 1380 1500 1550 1700 900 950 1000 1100

Weight (kg) 200 250 450 580 150 180 200 260

Application

The vacuum pump system is widely used in the area of installation and maintenance of power equipment such as transformer, capacitor etc., metal production and processing, drying and degassing, thermal treatment, coating in the area of semiconductor manufacture as well as surface refinement. ZKCC series can also be used as backing pump sets for high vacuum systems in combination with diffusion pumps, turbo molecular pumps and cryo pumps.

It is not suitable for the vacuum process for air and gases containing too much powder, water and oxygen as well as explosive, corrosive, poisonous and chemical substances.

Characteristics

The system adopts special roots pump and vacuum pump. So pumping speed and pressure can be obviously better than other devices.

Working vacuum range and maximum vacuum degree are superior to other products. It is installed with special vacuum gauge for accurate indication. It adopts automatic vacuum relay for automatic control. Stable and reliable operation, low noise, and easy to move.

Models and Main Technical Parameters Model ZKCC-30 ZKCC-70 ZKCC-150 ZKCC-300 ZKCC-600 ZKCC-1200

Pumping Speed (L/s) 30 70 150 300 600 1200

Ultimate Vacuum Pressure (Mpa) 5 5 3 3 2 2

Working Vacuum Pressure(Mpa) 130 125 110 105 100 80

Total Power (kw) 1.65 2.6 5.2 9.5 10.7 20.5

Wire Size of Input Power Supply ≥ (mm2) 1 1.5 3 4 6 8

Power Supply 50Hz 380V (3phase, 4wire)

Inlet Diameter (mm) Dn50 Dn80 Dn100 Dn160 Dn200 Dn250

Outlet Diameter (mm) Dn34 Dn60 Dn70 Dn90 Dn70 Dn90

Overall Dimensions (mm) 730×460×1000 790×550×1200 1050×600×135 1320×780×150 1450×860×201 1680×1000×26

With the development of modern industry, more and more assembly lines are adopted in all kinds of industries to improve the production capacity greatly. In the process of finished products testing especially inspection and commissioning of hydraulic system and lubricating cooling system, oil filling and oil discharge are needed during the procedure. It will be a problem that you can’t operate continuously by oil filling and oil discharge. Furthermore, repeated friction of commissioning oil in the machine will aggravate the wear of new components during commissioning.

To solve the problems mentioned above, we have the QDL series full automatic oil filling and ZKC series vacuum oil discharge machine, which will not only satisfy the constant working of oil filling and oil discharge before and after commissioning, but also filter the testing oil precisely to keep the clearness of oil so that the oil can be used time and time again.

Application

QDL series is mainly used for oil filtration and filling regarding to the hydraulic, lubricating and cooling system before test running and commissioning. It can fill at pre -set volume of all kinds of low viscosity lubricating oil.

Characteristics

The machine is light and flexible, small and easy to move.

With high filtration precision, simple operation

Can pre-set oil filling volume.

To meet the special requirements of deferent customers, We have the QDL-Ex series anti-explosion full automatic oil filling machine and QDL-T series automatic container filling machine at pre-set oil filling volume.

Models and Main Technical Parameters

Model QDL-10 QDL-20 QDL-30

Flow Rate (L/H) 0~10 10~20 20~30

Filtration Precision (μm) 5~10

Power Supply 50Hz 380V (3phase, 4 wire)

Total Power (kw) 0.37 0.55 0.75

Oil Outlet Diameter 15 20 25

Oil Outlet Diameter 15 20 25

GL series portable oil filtration & filling machine is developed and produced for oil filtration treatment and filling. It is ideal equipment for enterprises to transfer different kinds of oil from one container to the other, and at the same time the oil goes through filtration process.

GL series are applicable to filter mechanical oil, hydraulic oil, compressor oil, turbine oil, insulating oil, gasoline and diesel engine oil and other low viscosity lubricating oil, it’s very convenient to transfer oil, filling oil to electrical equipment together with filtration process.

It is made of stainless steel and innocuous filter element, so GL-R oil purifier can be used for cooking oil and drinks, such as sesame oil and peanut oil etc.

Characteristic

The machine is light and portable, simple in operation, low-noise. It can transfer oil from a long distance and high lift, no need of filter paper, cheap and environment

protection. Precise three-stage filter system to remove solid mechanical particulates and other impurities. The machine is installed with well-sealed anti-explosion electric control cabinet (anti-explosion series).

Models and Main Technical Parameters

Model GL-I GL-II

Technical Data

Flow Rate (L/H) 1800 3000 4800 6000 9000 12000 18000

Filtration Precision (μm) 1~10

Lift Head(m) 15

Suction Head (m) 5

Motor Power (kw) 0.55 0.75 1.1 1.5 4 4 5.5

Power Supply 50Hz 380V

Inlet(Outlet) Diameter (mm) 20 25 32 32 40 40 50

(GL-I) Overall Dimension (mm) 620 650 680 700 750 820 900

480 550 550 550 860 370 100

480 500 530 550 580 630 710

(GL-II) Overall Dimension (mm) 660 700 720 750 780 800 850

300 330 360 380 420 450 480

730 760 790 820 850 890 920

Net Weight GL-I (kg) 76 80 85 93 115 158 235

Net Weight GL-II(kg) 56 68 75 80 108 138 215

Application

It is used for flushing and cleaning of pipe system in hydraulic or dynamical system in deferent industries. It uses high pressure flushing solution to wash the whole pipe system of the newly installed equipment or equipment after maintenance before their normal operation.

Characteristics

QSJ adopts flushing solution with high flushing pressure and flow rate, which helps flush and clean the whole pipe system quickly and thoroughly.

The flushing agent can be water, oil or other liquid without acid or alkali. The outlet is equipped with pipes of different diameter, which can be connected with equipment with different

diameter inlet and to be washed at the same time. The flushing agent adopted can be recycled and reused. The device is installed with over pressure protection unit and the back flow is of normal pressure.

Models and Main Technical Parameters

Model QSJ-150 QSJ-250

Washing Flow Rate (L/min) 32~150 32~246

Total Power (kw) 20.5 26

Outlet Diameter(mm)

15、 20、 25、 30、 32

Power Supply 50Hz 380V (3pase, 4wire)

L 2000 2250

Overall Dimension (mm) W 1080 1260

H 1800 2000

Net Weight (kg) 820 1000

Adopting international advanced “coalescence separation” technology, JFS series oil purifier is an on-line turbine oil purifier developed to be used as oil filtration equipment for breaking emulsion, dehydration and removing impurities for many kinds of low-viscosity lubricating oil, as well as diesel fuel, gasoline fuel, kerosene, etc.

Application

The machine is mainly used to purify turbine oil and low viscosity lubricating oil with high water content and heavily emulsified. Due to the obvious effect in breaking emulsion and dehydration, it is widely used in the power generation plants and factories. It can work onsite and on line by connecting JFS machine to the oil container of the equipment, without interference of power supply.

Characteristics

Integrated with precise-filtration and high-efficiency dehydration function, it can break emulsion of oil and water, removing free water from oil. After treatment, free water content is lower than 80PPM. It can remove solid particulates from oil. The purified oil cleanness complies with NAS7 requirement.

High-precise filtration effect, large pollutant containing capacity, long-life filtration element, high-efficient dehydration. No heating, pumping or centrifugal process, so as to lower the cost. No effect on oil physical and chemical property so as to extend oil service life. Alarm on filter element malfunction and overload of electrical apparatus. Automatic water drainage and volume measurement. Capable Working onsite and on line.

Models and Main Technical Parameters

Model JFS-50 JFS-100 JFS-200 JFS-300 JFS-500 JFS-1000

Overall Dimension L(mm) 1580 1850 2300 2480 2580 3180

W(mm) 820 1000 1280 1300 1500 2030

L(mm)

1580 1850 2300 2480 2580 3180

Power Supply 380V 50Hz

Motor Power (kw) Main 1.1 2.2 7.5 15 18.5 37

Assistant 0.5 0.5 2.2 2.2 3.2 3.5

Flow Rate (L/min) 50 100 200 300 500 1000

Main Technical Data Working Pressure <0.5MPa

Oil Type turbine oil, low viscosity hydraulic oil, lubricating oil

Cleanness after Treatment 6~8 NAS

Remaining Water Content <80PPm

Filtration Precision 3~5μm

LDAF Series Full Automatic Water Purifier widely used in metallurgy, electric power, chemical industry, textile, papermaking, automobile, sugar refining. It can filter different water, such as reservoir, river, lake, well, and industrial polluted water, industrial cycle cooling water, water for daily life, desalination of seawater and polluted water.

Characteristic

The filtration area is large, and the filtration result is good. It can save energy: water, electricity, and labour. The machine uses absorbing pipe to drain pollutant, and the efficiency is higher. It can drain pollutants at regular times according to your settings. When the pressure of entrance and exit reaches the

fixed number, it can drain pollutants automatically or by hand. The amount of water for back- washing is small. The machine is set to high pressure alarm, electric breakdown alarm, drain breakdown alarm. The water purifier uses stainless steel filtration net. The ability of resisting acid and corrosion is strong. The filtration

area of the filtration net is 30% larger than of common filtration net. Control system use PLC controller that can communicate with high-position machine through machine group LCV.

The high position machine can monitor and control the water purifier. The machine is fit for automatic operation.

It is convenient to repair and check.

Models and Main Technical Parameters

Model LDAF-50 LDAF-100 LDAF-150 LDAF-200 LDAF-250 LDAF-300 LDAF-400 LDAF-500 LDAF-600

Design the flow 50 100 150 200 250 300 400 500 600

Inlet/Outlet Diameter (mm) 80 100 125 150 200 250 300 350 400

Drainage Diameter (mm)

40

50 65 80 100 125 125 150 150

Power (KW) 0.18 0.18 0.37 0.37 0.55 0.55 0.75 1.1 1.5

Power Supply 380V 50HZ 3 phase (or as needed)

Working Pressure (Mpa) 1.0 or 1.6 (or as needed)

Filtration Precision(mm) 0.01~6

Self-Washing Time 5~10s

Pressure Losing (Mpa) 0.01~0.03

Maximum Temperature 65°C

The filter elements are made of high-quality filtering material, with a variety of models and specifications for different application. It is either as small as a candle or as big as a basket. We have some special filter elements for our customers' free choice, which can either absorb resolved water in the oil or to filter solid particulates of a wide range of fineness from 0.2 – 200μm.

Characteristics

High precise filtration with different fineness Large filtration area with big pollutant containing capacity while the coalescence-separation elements are

quite efficient to get rid of water from oil Some filtering elements are made of multi-layer, flat-woven, silk screen, with high efficiency and easy to

clean by back-washing Excellent heat-resistant property, which can filter oil at temperature as high as 120℃ , with maximum

temperature of 380℃ , with good Mechanical strength, acid and alkali resistant, and long service life. Guide for customer selection It is very important for the customers to select proper filter element for precise oil purification process

according to the specific range of pollutants in the oil and different functions of filter element. Professional selection means high efficiency and low cost in element replacement.

SY series portable breakdown voltage tester is widely used in power generation, petrochemical, metallurgical and other industries, suitable for testing breakdown voltage in insulating oil under 220KV. Characteristics Digital display, high sensitivity and precision, portable to worksite Major Index Model: SY-80 Testing range: 60, 75, 85KV Polar clearance: 205mm Oil capacity: 70ml/time Dimension: 450×350×420mm

Application

It is widely used to regenerate and purify the deteriorated transformer oil, circuit breaker oil, capacitor oil, low viscosity lubricating oil, in power generation plants, transformer stations, electrical transmission and supplying company, factories, mines, railway transportation, etc.

It can be used as special equipment for electric power transformer maintenance. Not only can it remove water, gas, and other impurities from the oil, but also it can remove oxide materials and remove free carbon in the deteriorated oil to lower the PH value, improve its breakdown voltage and quality.

Characteristics

High-efficient degassing and dehydration system, adopting vacuum flash distillation technique to remove water and gas from oil.

Precision multi-stage filtration system, high-quality filter element, big capacity of containing pollutant and fine filtration from one stage to the other.

Special absorbing agent is used to remove free carbon and water-soluble acid so as to improve flash point, acid value and dielectric property of oil.

Safe electric heating system with swirling heating element with merits of quick heating, constant and even temperature.

Chain safe protection system, pressure protection device, interaction of oil inlet and heating, infrared oil level control system, all these help avoid damage from incorrect operation.

Obvious effect on deteriorated insulating oil treatment and suitable to transformer oil purification onsite and online.

Convenient for Vacuum pumping and oil injection to transformers.

BZ Series Transformer Oil Regeneration Device is developed and produced based on principles of physics and chemistry. It can regenerate and purify unqualified oil by using special oil purification agent and process. BZ series is mainly used for regeneration and purification process of insulating oil such as transformer oil, inductor oil, circuit breaker oil as well as low-viscosity lubricating oil. It can efficiently remove acid, free carbon, dye material and other impurities from oil without affecting the basic property of the oil. After purification process the oil quality will be well improved and can comply with national standard. This series is also applicable to refining hydraulic oil, turbine oil, compressor oil, refrigerator oil, vacuum pump oil, gear oil etc.

Characteristics

Small size, light in weight, convenient moving and simple operation. Since it can work onsite and online. It will decrease to minimum economic loss caused by power off, production interference and oil replacement. The process charge is less than 10% of the cost of new oil. BZ series can be used together with ZL series vacuum oil

purifier for better result and efficiency.

Models and Main Technical Parameters

Model BZ-Ⅰ BZ-Ⅱ BZ-Ⅲ BZ-Ⅳ

Capacity (T) 1~2 2~4 4~10 10~20

Purification Agent (kg) 25 50 100 200

Power (kw) 0.55 0.75 1.1 1.5

Power Supply 50Hz 380V (3pase, 4wire)

L 400 450 500 700

W 400 450 500 700

Overall Dimension (mm) H 1300 1400 1500 1650

Guarantee Performance Index Acid Number ≤0.03mgKOH/g

Water-Soluble Acid ( PH) ≥ 5.5(GB/T264)

Flash Point (℃) ≥ 135(GB/T261)

Breakdown Voltage (kv) 35~55

Impurity (%) 0 (GB/T511)

Water (%) 0 (GB/T511)

Dielectric Loss Number tgΣ(90 ℃)%≤ 0.1