ODU Branch Pipe Installation Manual FQZHW-0XN1D
Transcript of ODU Branch Pipe Installation Manual FQZHW-0XN1D
ID:15.9ID:19.1
ID:6.4
M(Two) N(Two) P(Two)
ID:15.9 ID:19.1ID:6.4
M N P
Name Gas side joints
Branch List
FQZHW-02N1D
FQZHW-03N1D
FQZHW-04N1D
Appearance And Connection Sketch Of FQZHW-02N1D
1
ID:31.8
0D:34.9
ID:31.8ID:38.1
ID:34.90D:31.8
ID:25.4
0D:31.8 ID:38.1
ID:41.3
ID:31.8
0D:31.8ID:31.8ID:25.4
ID:31.8
0D:34.9
ID:31.8ID:38.1
ID:34.90D:31.8
ID:25.4
0D:31.8
0D:34.9ID:34.9
ID:38.1
ID:34.9
ID:31.8
ID:31.8
0D:31.8
ID:25.4
0D:31.8
ID:38.1
ID:41.3
ID:31.8
0D:31.8ID:31.8ID:25.4
ID:31.8ID:25.4
ID:31.8ID:25.4
ID:41.3
ID:44.5
ID:31.8
0D:31.8ID:31.8ID:25.4
ID:15.9
ID:19.1
ID:15.9
ID:15.9
0D:15.9ID:12.7
ID:12.7
0D:15.9
0D:25.4ID:25.4ID:22.2
ID:22.2ID:15.9
0D:15.9ID:15.9ID:12.7
ID:19.1ID:22.2
ID:15.9
0D:15.9ID:15.9ID:12.7
ID:15.9
ID:15.9
ID:19.1
ID:15.9
0D:15.9ID:12.7
ID:12.7
0D:15.9
ID:15.9
0D:19.1ID:19.1
ID:15.9
ID:22.2
ID:19.1ID:15.9
0D:15.9ID:12.7
ID:12.7
0D:15.9
ID:19.10D:22.2ID:22.2
ID:19.1ID:15.9
0D:15.9ID:15.9ID:12.7
ID:31.8ID:25.4
Liquid side jointsGas balance
joint 1Gas balance
joint 2 Oil balance
Table.1
Choice
FQZHW-02N1D
Branch pipes for outdoor unit
Table.2
FQZHW-03N1D
FQZHW-04N1D
Pipe Size
8HP
36~50HP26~34HP
10HP
16HP
24HP
68~88HP52~66HP
Please select and install the branch pipe according to outdoor unit installation manual and actual installation conditions.
Installation Precaution
1) Pay attention to the distance of straight horizontal pipe.
a.The straight horizontal pipe’s distance between two adjacent branch pipes should ≥0.5m. b.The straight horizontal pipe’s distance which outdoor unit connecting behind the branch pipe should ≥0.5m.
Outdoor unit
Above 0.5m
Outdoor unit Outdoor unit
Above 0.5m
2
Y1
Y6 Y3Y2
Y1 Y1
Y7
Y1
Y7
Y1
Y8 Y5
Y4Y6
Y2
Y1
Y6Y2
Q1
Q3Q4
Q1
Q1 Q1
Q1
Q1
Q2
Q2
Q2
Q7
Q7Q5
Q5
Q6
Installation Notices
Abandon
Cut from the middle
Cut from the bottom
Cut from the bottom
Fig.1 Fig.2
Fig.3 Fig.4
1)Select the proper branch model according to table2.2)According to the actual piping size and cut off the needless parts with special tools such as cutter, take the FQZHW-02N1D gas side for example and the operating steps as follow: a.When selecting model FQZHW-02N1D, the actual object as display in Fig.1, and then suppose that the outlet pipe of the machine isΦ31.8, main pipe isΦ38.1. As display in Fig.2, cut the standalone connecting pipe Q1 of the branch pipe component. b.As display in Fig.2, weld the standalone connecting pipe Q1, Q3 with the U-shape three direct link s Q4; abandon the standalone connecting pipe Q2 because selected pipe sizeΦ31.8 can directly connect with the un-welded side of U-shape three direct links. c.As display in Fig.3, weld the branch pipe components with the field pipes. 3)Particularly notice the followings: a.When the actual pipe size matches with the un-welded side of U-shape three direct links, weld the pipe with the U-shape three direct links. b.For the connecting pipes Q3 and Q7, if they need to be cut, please cut in the bottom of the flaring as display in Fig. 4.
Q1
Q2
Q1
Q2
Q1 Q7
Q4 Q4 Q3Q3
Q4 Q3
Thank you very much for purchasing our air conditioner, Before using your air conditioner , please read this manual carefully and keep it for future reference.
MD12I-042DW16111700000019OUTDOOR UNIT BRANCH PIPE INSTALLATION MANUAL Appearance And Connection Sketch Of FQZHW-03N1D
Appearance And Connection Sketch Of FQZHW-04N1D
2
3
4
Incision
Cut off the part from middle site
Branch pipe
Field pipeConne
ction
part
Keep the cutting direction and the copper pipe in a vertical position
Heat insulation material
(2 sets)
(4 sets)
(6 sets)
Heat insulation
1) Example of connected branch.
Be sure to insulate the brahches against heat
Field pipe
Field pipe
Branch (supplied)
Field pipe
heat insulation material(supplied)
Tape
Field piping heat insulation material
2) Use the supplied heat insulation material to insulate the branches against heat.
3) Apply the heat insulation material and seal all connections with tape.
Horizontally Placing Branch Pipe
B
A
Direction A Direction B
� ±10°
� ±10°� ±10°
A horizontally incline angle should not larger than 10°.
Adhesive paper(tear off before pasting)
W1
W2
W1
W2
W1
W2
W1
W2(Master unit)
Gas pipe joint Q4
Gas pipe joint Q2 Field piping Φ25.4 or Φ31.8(According to the W1 unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
Gas pipe joint Q1
Gas pipe joint Q3
Field piping Φ6.35
Elbow(Unit accessories)
Oil balance pipe
Gas pipe
Liquid
pipe
Welding
Welding
Field piping, select piping according to table 3
Field piping, select piping according to table 3
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Liquid pipe joint Y3
Liquid pipe joint Y1
Liquid pipe joint Y6
Liquid pipe joint Y2
V5X outdoor unit pipe connection
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter) Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Field piping Φ12.7 or Φ15.9(According to the
unit factory diameter)
Liquid pipe joint Y4
Liquid pipe joint Y6
Liquid pipe joint Y7
W1
W2
W3(Master unit)
W1
W2
W3
Field piping Φ19.1
Liquid pipe joint Y2
Gas pipe joint Q1(2 sets)
Gas pipe joint Q7
Gas pipe joint Q2
Gas pipe joint Q1 (3 sets)
W1
W1
W2
W2
W3
W3
Gas pipe joint Q5
Field piping Φ38.1
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
W1
W2
W3
W4
Liquid pipe joint Y5Liquid pipe joint Y8
Liquid pipe joint Y7
Liquid pipe joint Y6
W1
W2
W3
W4(Master unit)
Field piping Φ22.2
Field piping Φ19.1
Liquid pipe joint Y2
Oil balance pipe P
Oil balance pipe P
W1
W2
W3
W4
Gas pipe joint Q7
Gas pipe joint Q6
Gas pipe joint Q5
W1
W2
W3
Gas pipe joint Q2
W4
Field piping Φ41.3
Field piping Φ38.1
Note:1) The largest capacity outdoor unit should be set as master unit.2) The above figure is only available for V5X Series.3) The unit factory diameter:
8/10HP
Gas pipe: Φ25.4Liquid pipe: Φ12.7
12HP
Gas pipe: Φ28.6Liquid pipe: Φ15.9
14/16HP
Gas pipe: Φ31.8Liquid pipe: Φ15.9
18/20/22HP
Gas pipe: Φ31.8Liquid pipe: Φ19.1
Note:1) The largest capacity outdoor unit should be set as master unit.2) The above figure is only available for V5X Series.3) The unit factory diameter:
8/10HP
Gas pipe: Φ25.4Liquid pipe: Φ12.7
12HP
Gas pipe: Φ28.6Liquid pipe: Φ15.9
14/16HP
Gas pipe: Φ31.8Liquid pipe: Φ15.9
18/20/22HP
Gas pipe: Φ31.8Liquid pipe: Φ19.1
Note:1) The largest capacity outdoor unit should be set as master unit.2) The above figure is only available for V5X Series.3) The unit factory diameter:
8/10HP
Gas pipe: Φ25.4Liquid pipe: Φ12.7
12HP
Gas pipe: Φ28.6Liquid pipe: Φ15.9
14/16HP
Gas pipe: Φ31.8Liquid pipe: Φ15.9
18/20/22HP
Gas pipe: Φ31.8Liquid pipe: Φ19.1
Field piping Φ25.4 orΦ31.8(According to the
unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)Field piping Φ25.4 or Φ31.8
(According to the unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
Field piping Φ25.4 or Φ31.8(According to the
unit factory diameter)
Field piping Φ6.35
Field piping Φ6.35
Elbow(Unit accessories)
Elbow(Unit accessories)
Oil balance pipe
Oil balance pipe
Oil balance pipe M
Gas pipe
Gas pipe
Liquid
pipe
Liquid
pipe
Welding
Field piping Φ6.35
Field piping Φ6.35
Field piping Φ6.35
Field piping Φ6.35
Welding
Welding
Welding
Welding
Welding
Welding
Field piping, select piping according to table 3
Field piping, select piping according to table 3
Field piping, select piping according to table 3
Field piping, select piping according to table 3
Liquid pipe joint Y1 (2 sets)
Liquid pipe joint Y1 (3 sets)
Quantity of outdoor units
Branch pipe