NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances,...
-
Upload
avis-fleming -
Category
Documents
-
view
222 -
download
2
Transcript of NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances,...
![Page 1: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/1.jpg)
NUMERICAL Analysis of Processes
NAP11
Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed streams of fuel and oxidant (method of mixture fraction). Heterogeneous combustion. Multiphase flows (VOF, Euler method and the method of mixture).
Rudolf Žitný, Ústav procesní a zpracovatelské techniky ČVUT FS 2010 Baldung
![Page 2: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/2.jpg)
NAP11 Combustion
Homegeneous combustion
Premix (only one inlet stream of premixed fuel and oxygen)
Non premixed (separated fuel and oxidising streams)
Laminar flame
Turbulent flame
Laminar flame
Turbulent flame
mixture fraction method (PDF)
EBU (Eddy Break Up models)
Liquid fuels (sprays)
Solid fuels (powder, coal)
Lagrangian method-trajectories of a representative set of droplets/particles in
a continuous media
Lagrange method-trajectories of particles
![Page 3: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/3.jpg)
NAP11 Combustion single-phase flow
Premix (kinetic combustion)
flameletsflamelets
Turbulent premixuL flame velocity (=umsin)
Fronta hořeníFronta hoření
um
Bunsen laminar flame
um
Porous plate
Planar flame
R.N. Dahms et al. / Combustion and Flame (2011)
Nonpremix (diffusive combustion)
Turbulent nonpremix
palivo+spaliny
vzduch+spaliny
vzduch
Čára stechiometrie
Laminar nonpremix
Flame front
palivo vzduch
Spaliny
![Page 4: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/4.jpg)
NAP11 Combustion
Goals of CFD at combustion modelling
Temperature field, thermal Power, thermal loads of walls
Composition of flue gas (emision NOx)
Basic physical laws
NS equations, k-
Transport of species (mass balances of components)
Chemical reactions (equilibrioum, rate equations)
Energy balance (and radiation)
![Page 5: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/5.jpg)
NAP11 Mass balances
i mass fraction of component i in mixture [kg i]/[kg mixture]i mass concentration [kg i]/[m3]
Mass balance (transport equation for each component)
( ) ( ) ( )i i i i iSut
Production rate of component i [kg/m3s]
Mass balances of all components (hydrocarbons, N2, O2, H2O, CO, CO2, S, SO2, NOx ) in fuel stream, oxidiser stream and flue gas
![Page 6: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/6.jpg)
NAP11 Mass balances
Rate of the components Si production is controlled by the following mechanisms
Diffusion of components (micromixing) – tdiffusion (time constant of diffusion)
Chemical kinetics (rate equation for micromixed reactants) – treaction (halftime of reaction)
Damkohler numberdiffusion
reaction
tDa
t
exp( ) ai i
i i
ES A
RT
S Ck
Da<<1
Da>>1
Kinetic control (Arrhenius)
Diffusion control (turbulent)
According to prevailing mechanism we distinguish diffusion or kinetic burning
![Page 7: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/7.jpg)
NAP11 Mass balancesThe rate of production of a specific component i involves more than one reaction and Si should therefore be calculated as the sum of all ongoing reactions. E.g. combustion of methane, collectively described by a single equation CH4+2O2CO2+2H2O takes place in fact by the reaction mechanism, which is described by a system of 277 differential equations of kinetics in which figures 49 components, such as radicals O, OH, H, ... Actual reaction mechanism is usually substituted by simplified mechanism by only few kinetic equations of the most important intermediate steps. For example the methane combustion can be approximated by two reactions (Peters 2000)
22
224
2
1
22
3
COOCO
OHCOOCH
Rate of CO production can be calculated from the 2 reactions (MCH4=16,MCO=28)
4 4
28 28( )
16 16CO CO CH R CO CHS R R Ck
Assuming that the rate is
controlled by turbulent diffusionRate of the first reaction
![Page 8: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/8.jpg)
NAP11 Reaction rateProblem with the prediction of reaction rate is its nonlinear dependence upon temperature
Bimolecular reaction A+B→C
Reaction rate actual
mean
exp( )
exp( )
A B
A B
ER A
RTE
R ART
exp( ) exp( )E E
RT RT
Reaction rate is underestimated when using the mean temperature instead of the mean value of the Arrhenius term
T[K]
Tmean TmaxTmin
SNOx
Actual production rate of NOx
1500 2000
Example NOx production
By an order of magnitude less production of NOx derived from mean
temperature
![Page 9: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/9.jpg)
NAP11 Enthalpy balanceOnly one equation of enthalpy balance summarising contributions of all reactions is necessary
( ) ( ) ( ) hh hu h S Qt
Sum of reaction enthalpies
h i rii
S S h
Assuming no phase changes h ~ cpT
Radiation emiited by flue gas and absorbed by wall of combustion chamber
![Page 10: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/10.jpg)
NAP11 Enthalpy balance radiation
Volumetric enthalpy source is represented by emission and absorption of radiation.
4 4g S g wQ T A T
Emissivity corresponding to temperature of flue gas Ts
Absorptivity of gas corresponding to wall
temperature Tw
The following relationship is a drastic simplification (P1 model) applicable at high optical densities of flue gas
![Page 11: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/11.jpg)
NAP11 Mixture fraction method f
fuel
oxidiser
Mańy different CFD models are used for description of combustion. The simplest method of mixture fraction can be applied for nonpremixed streams of fuel and oxidiser
Hans Baldung
![Page 12: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/12.jpg)
NAP11 Mixture fraction methodNon-premixed combusion, and assumed fast chemical reactions (paraphrased as “What is mixed is burned or is at equilibrium”)
mfuel
moxidiser
Flue gases
Mass balance of fuel
Mass balance of oxidant
Calculation of fuel and oxidiser consumption is the most
difficult part. Mixture fraction method is the way, how to
avoid it
3
of produced fuel[ ]kg
s m
Mass fraction of oxidiser (e.g.air)
Mass fraction of fuel (e.g.methane)
( ) ( ) ( )fuel fuel fuel fuelu St
( ) ( ) ( )ox ox ox oxu St
![Page 13: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/13.jpg)
NAP11
Stoichiometry
1 kg of fuel + s kg of oxidiser (1+s) kg of product
and subtracting previous equations
( ) ( ) ( ) fuel oxsu S St
Introducing new variable
This term is ZERO due to stoichimetry
Mixture fraction method
fuel oxs ( ) ( ) ( )
( ) ( ) ( )
fuel fuel fuel fuel
ox ox ox ox
s s s su St
u St
![Page 14: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/14.jpg)
NAP11 Mixture fraction methodMixture fraction f is defined as linear function of normalized in such a way that f=0 at oxidising stream and f=1 in the fuel stream
Resulting transport equation for the mixture fraction f is without any source term
( ) ( ) ( )f fu ft
Mixture fraction is property that is CONSERVED, only dispersed and transported by convection. f can be interpreted as a concentration of a key element (for example carbon). And because it was assumed that „what is mixed is burned“ the information about the carbon concentration at a place x,y,z bears information about all other participating species.
,0 ,0 ,00
1 0 ,1 ,1 ,0 ,0 ,1 ,0
( )
( )fuel ox fuel ox fuel ox ox
fuel ox fuel ox fuel ox
s sf
s s
s
s
![Page 15: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/15.jpg)
NAP11
,0
,1 ,0
oxst
fuel oxoichiof
s
At fuel rich locations (high values of f) holds
ox ,1( =0) 1 1fuel
stoichiostoichio
stoichiofuel
ff
f
ff
0 0stoichio fuelf f
At the point x,y,z where f=fstoichio are all reactants consumed (therefore
ox=fuel=0)
At fuel lean region
Mixture fraction methodKnowing f we can calculate mass fraction of fuel and oxidiser at any place x,y,z
![Page 16: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/16.jpg)
NAP11
Combustion of coal powder, or burning of fuel droplets ejected from a nozzle or a rotating disc (atomizer) are examples of heterogeneous combustion soleved usually by Lagrange method (tracing trajectories of particles moving inside a continuous phase – flue gas).
Baldung
Heterogeneous combustion
mfuel
![Page 17: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/17.jpg)
NAP11
1| | ( )
2D D
dum F
dt
F c A u v u v
Sum of all forces acting to liquid droplet moving in continuous fluid (fluid velocity v is calculated by solution of NS equations)
Relative velocity (fluid-particle)
Drag force
Drag coefficient cD depends upon Re
0.687
5
24 3(1 Re) Re 5 Oseen
Re 1624
(1 0.15Re ) Re 800 Schiller NaumanRe
0.4 1000< Re 3.10 Newton
D
D
D
c
c
c
1 104 105 Re
cD
Newton’s region cD=0.44
Cloud of particles (c volumetric fraction of dispersed phase)
3.70 /D D cc c
Heterogeneous combustion
![Page 18: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/18.jpg)
NAP11
Example: Evaporation of fuel droplet
Diffusion from surface and mass chenges of droplet
22
05 0.33
( ) ( )6
2 0.6Re
p g dif fg s
dm d DD Sh D
dt dt
Sh Sc
Mass fraction of fuel at surface
Sherwood number
Schmidt =/Ddif
Correlation Ranz Marshall for convective mass transfer
Along the particle trajectory it is necessary to calculate: heating, evaporation of volatile fraction, surface reaction. For the modelling of these processes engineering correlations for heat and mass transfer are used.
Heterogeneous combustion
![Page 19: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/19.jpg)
NAP11 Multiphase flows
Baldung
Methods
Lagrange (spray)
Mixture (sedimentation)
Euler (most frequently used)
VOF (free surface)
![Page 20: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/20.jpg)
NAP11 Multiphase flowsFluidised bed Mixer with
central draft tube
Sprey dryer
Anul.tok
slug
Bublin.var
Convective boiling
Visualisation see for example at THERMOPEDIA
![Page 21: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/21.jpg)
NAP11 Euler – multiphase flow
For every phase q is solved
Continuity equation (mass balance of phase q)
Momentum balance
( ) ( )q q q q q pqp
v mt
Volumetric fraction of phase q
Velocity of phase q
Mass transport from phase p to phase q
( ) ( ) ( )q q q q q q q q q q pqp
v v v p Rt
Interphase forces
Stresses calculated in the same way as in onephase flows
![Page 22: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/22.jpg)
NAP11 Model of mixture ASM(Miko Manninen
VIT report)
The method solves in fact a one-phase flow for the mean density m and mean velocity vm
Continuity equation for mixture
Continuity equation for secondary phase p
Momentum balance for mixture (for single velocity)
( ) 0mm mvt
, ,
,
( ) ( ) ( ( ( ) ) ( )
Tm m m m m m m m p p dr p dr p
p
dr p p m
v v v p v v v vt
v v v
,( ) ( ) ( )p p p p m p p dr pv vt
Driftové rychlosti jsou počítány z algebraického modelu na základě zrychlení (gravitace, odstředivé síly), které působí
na složky směsi o různé hustotě
![Page 23: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/23.jpg)
NAP11 Aplikace: Airlift reaktory
Avercamp
![Page 24: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/24.jpg)
NAP11 Aplikace: Airlift reaktory
![Page 25: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/25.jpg)
NAP11 Aplikace: Airlift reaktoryPoužití metody Euler/Euler pro popis probublávaného reaktoru, kde v kapalině jsou malé a velké (Taylorovské) bubliny. Nestejné bubliny jsou považovány za různé fáze.
Řeší se trojice rovnic bilance hmoty pro objemové zlomky fází 1 (podíl kapaliny), 2 (malé bubliny), 3 (Taylorovské bubliny).
Mezifázové síly Mkl se uvažují jen mezi kapalinou a bublinami (ne mezi malými a velkými bublinami navzájem)
Pro každou fázi se řeší rovnice hybnosti:
Krishna, Baten: Eulerian simulations…
![Page 26: NUMERICAL Analysis of Processes NAP11 Combustion and multiphase flows. Mass and enthalpy balances, chemical reactions. Combustion chamber with nonpremixed.](https://reader036.fdocuments.in/reader036/viewer/2022062308/56649d765503460f94a57a49/html5/thumbnails/26.jpg)
NAP11 Aplikace: ASM tok kalu
J. Ling, P.V. Skudarnov, C.X. Lin, M.A. Ebadian: Numerical investigations of liquid–solid slurry flowsin a fully developed turbulent flow region. International Journal of Heat and Fluid Flow 24 (2003) 389–398
Liquid–solid slurry flows. Algebraic Slip Model.