HT-BS030

www.hootoo.com

NORTH AMERICAE-mail: support.ca@hootoo.com (CA)support@hootoo.com (US)Tel: 1-888-456-8468(Monday-Friday: 9:00 – 17:00 PST)Address: 46724 Lakeview Blvd, Fremont, CA 94538

EUROPEE-mail: support.uk@hootoo.com (UK)support.de@hootoo.com (DE)support.fr@hootoo.com (FR)support.es@hootoo.com (ES)support.it@hootoo.com (IT)EU Importer: ZBT International Trading GmbHAddress: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland

ASIA PACIFICE-mail: support.jp@hootoo.com (JP)

CONTENTSImportant

Know Your Barcode Scanner

What’s in the Box

Product Diagram

Specifications

Scan Aiming

Decode Zoom

Get Started

Power On / Off

Charge the Barcode Scanner

LED Indicator & Beeper

Pair the Scanner with a Device

Set Your Barcode Scanner

Normal Mode

Inventory Mode

Set Sleep Timer

Set Power off Time

Scanner Sound Setting

Same Code Delay Time Setting

Reading Setting

Code Suffix / Prefix Setting

Code ID Table

USB Receiver Setting

Language

Code Symbol On / Off

Troubleshooting

05-0905

03-04

07-09

09-16

10-11

17-19

01-05

01

01

02

04

05

05

06

09

10

12

12

13

13

14

15

15

16

20

Know Your Barcode ScannerThe HooToo Bluetooth Scanner combines top scanning performance and excellent

ergonomics to provide the best value in a lightweight laser scanner. Whether used as a

hand-held scanner or hands-free in a stand, the scanner ensures comfort and ease of use

for extended periods of time.

Important Product Diagram

What’s in the Box

1 x HooToo Bluetooth Barcode Scanner

1 x Charging / Data Cable

1 x Thank You Card

1 x User Guide

1. Scan Lens

2. Laser Diode

3. Trigger

4. Battery Compartment

5. Battery

6. LED Indicator

Regularly clean the scanning window for better scanning accuracy

Keep the window away from any abrasive material

Remove any dirt particles with a damp cloth

Wipe the window using a tissue moistened with ammonia / water

Do not spray water or other cleaning liquids directly into the window

Thank You Card

1

3

4

7

5

6

2

01 02

Scan Aiming

Note: Do not hold the scanner directly over the barcode.

65° 65°

Specifications

Communication Distance

Communication Protocol

Compatibility

Data Memory

Scanning Type

Source

Max Scanning Speed

Decoding Accuracy

Depth of Focus

Decoding IC

Print Contrast

Working Current

Battery

Charging Input

Charging Time

Service Time

Scan Mode

Prompting Mode

Error Rate

7 to 10 m / 22.9 to 32.8 ft

Bluetooth 3.0

iOS, Mac, Android, XP, Win 7, Win 10 etc.

16MB Flash

Single / Continuous / Automatic Scan

LED (622nm – 628nm)

200 times / second

3.3mil

3.3mil: 2mm – 100mm

10mil: 2mm – 350mm

15mil: 5mm – 500mm

30mil: 10mm – 600mm

32 bit high-speed processor

Minimum reflectivity of 30%

Decoding: 40mA

Working: 20mA

Standby: 5mA

Shutdown: 1.8uA

750mAh

5V 500mA

1.5 hours

30 hours

Wired / Wireless

Buzzer, LED Light

1/5000000

Scanning Angle

Decoding Ability

Support Interface

Rotation Angle: ±42°

Oblique Angle: ±65°

Deflecting Angle: ±65°

UPC-A, UPC-E, EAN-8, EAN-13, Code 128,

Code 39, Code 39, Full ASCII, Codabar / NW7,

Code 93, Code 11, MSI, Interleaved 25, Industrial

25, ISBN, ISSN, China Post etc.

General one-dimensional codes

USB HID, USB Virtual Serial (Need to install drive

and setup code), SPP

03 04

06

LED Indicator & Beeper

Beeper

3 beeps

3 beeps

N/A

N/A

3 beeps

2 beeps

1 tick

1 short beep

1 beep

1 tick

2 beeps

LED Indicator

Blue LED On

Red LED flashes 3 times

Red LED flashes 3 times

Red LED flashes

Red LED flashes, blue LED solid on

Blue LED on

Red LED on

Blue LED on

Blue LED on

Red LED on

N/A

Indication

Power up with over 30% battery

Power up on with battery lower

than 30%

Power off with battery lower

than 20%

Battery drained

(Charge for 30 to 50 minutes,

then power on again)

Pairing

Paired (Power up then pair)

Transmission error

Code scanned and uploaded

Code scanned and saved in

inventory mode

Transmission error or insufficient

space in inventory mode

Connected to host device in

wired mode

Shut Down

Pressing the Trigger will turn on the scanner and make the laser appear.

The scanner will automatically shut off if detecting no operation in 30 seconds. You

can also scan the following barcode to manually shut it off.

��� ����� ���

Decode Zone

TT Scanner

in.10 25.4

12.7

0

12.7

25.4

5

0

5

10

cm

Width

of

field

5 mil2.5”

1.5”

1.0” 14.5”

10.0”

6”

7.5 mil

10 mil

0 17.0”100% UPC

* 23.0”20 miL

0in.cm 0

512.7

1025.4

1538.1

2050.8

2563.5

Depth of Field

*Minimum distance determined by symbol length and scan angle

Note: Typical performance at 73° (23℃) on high quality symbols in normal

room light.

Powering On / Off

Charge the Barcode Scanner Simply connect the scanner with any USB power adapter via the included USB cable. The

LED light will flash red and blue alternately while the scanner is being charged.

Battery Status

Charge the scanner if the LED indicator flashes red 3 times as low battery alarm.

Scan the barcode to learn about the battery status on your PC.

Note:

05

0807

1. Scan the barcode to pair with your host device.

Bluetooth SPP Mode

2. Scan the barcode to return to default setting.

Wired Connection 1. Plug the cable connector into the data port on the bottom of the scanner handle.

2. Gently tug the cable to ensure the connector is properly secured.

3. Connect the other end of the interface cable to the host computer.

4. Your PC will install the driver automatically. Once the driver installation is completed,

the scanner is ready for use.

Pair the Scanner with a Device

Scan the following barcodes to switch from wireless into wired mode to enable / disable

wired mode.

Wired Mode On *

Wired Mode Off

Bluetooth Connection

Bluetooth HID Mode *

Bluetooth Keyboard Speed (15)*

Bluetooth Keyboard Speed (30)

Bluetooth Keyboard Speed (40)

Bluetooth Keyboard Speed (50)

Bluetooth Keyboard Speed (60)

1009

Scan the barcodes directly, the decoded data will be transferred to the receiver and

displayed on the PC or your host. A prompt sound will be heard if registration failed.

Inventory mode allows you to use the scanner without any connection to a host. The

scanned codes will be stored in the built-in memory of the scanner. At the end of your

work, scan the “Transfer Data” code to transfer the data to your PC or other host.

Transfer Speed Setting (Inventory Mode Only)

Scan “Total Number of Data Entry” to check how many data is decoded

After you transfer the data in inventory mode, scan “Clear Data” to clear the inventory data.

Set Sleep Time

Normal Mode

Clear Data

Fast

Standard

Slow

Sleep Time 20 Seconds

Sleep Time 10 Seconds

Inventory Mode

Transfer Data

Total Number of Data Entry

Pair with phone, pad, or other devices.

Pair with your laptops or use the cable to connect the Bluetooth scanner.

Pair with PC without Bluetooth, you need to use a Bluetooth receiver or the wired mode to

connect with a PC without Bluetooth functionality.

3. Pair with different hosts

Turn on Bluetooth on the host device, scan the Bluetooth barcode to pair.

Set Your Barcode Scanner

Normal Mode (*)

Inventory Mode

11 12

Sleep Time 5 minutes

Sleep Time 30 minutes

Set Power Off Timer

Scanner Sound Setting

Beeper Sound Off

Turn Off in 10 Seconds

Turn Off in 15 Minutes

Shut Down

Tone 0

Tone 1

Lower Beeper Volume

Medium Beeper Volume

High Beeper Volume

Sleep Time 30 Seconds

Sleep Time 60 Seconds

Sleep Time 2 Minutes

Sleep Time 10 Minutes

Sleep Time 20 Minutes

Stay Powering On

13 14

Same code delay time infinite

Same Code Delay Time Setting

Same code delay time 0 sec *

Same code delay time 1 sec

Same code delay time 2 sec

Set up the minimum delay time between decoding of the same codes:

Single Scan

Automatic Off

Automatic On

Scanner Reading Setting

Continuous Scan

Note: When you use the automatic mode, the sleep time is set to 15 minutes.

Disable

LF

CR+LF

CR

Code Suffix / Prefix Setting

Preamble - STX

Postamble - ETX

Add ID AS Prefix on

Add ID AS Prefix off *

1615

Code ID Table

Code Type

Code 39

EAN8

Code 128

Industrial 2 of 5

Code11

China Post Code

ID

a

d

g

j

M

y

ID

b

e

h

k

c

I

Code Type

UPC-E

ISBN

Interleaved 2 of 5

GS1 Data Bar

GS1 Expanded

GSI Limited

ID

c

f

i

D

E

L

Code Type

UPC-A

EAN13

Code93

CODABAR

Code32

MSI

Language Setting

UNITED STATES

FRANCE

SERBIA / YUGOSLAVIA

BELGIUM

GERMANY

SLOVENIA

BRAZIL

PORTUGAL

SPAIN

ITALY

UNIVERSAL

USB Virtual Serial

USB HID *

USB HID Fast (WINDOWS)

USB HID Slow (APPLE)

USB Receiver Setting (Functional with USB Cable Plugged in)USB Receiver Setting (Optional)

1. USB virtual serial

2. USB HID *

Note: to activate the USB virtual serial, you need to install the driver beforehand.

1817

Enable * Disable

Enable * Disable

Code Symbol On / Off

CODE11

CODE128

FULL ASCII Enable

FULL ASCII Disable *

Enable * Disable

CODE 39

Enable * Disable

Industrial 2 of 5

UPC-A

Enable * Disable

Enable * Disable

Enable * Disable

Enable * Disable

CODE 93

CODABAR

Interleaved 2 of 5

2019

Enable * Disable

CODE32

On Off

CODE32 Check Digit

Enable * Disable

UPC-E

Enable * Disable

EAN - 13

Enable * Disable

EAN - 8

Troubleshooting

Problem Possible Causes

No power to the scanner.

Barcode is decoded, but

not transmitted to the host.

Scanner is not programmed

for the correct host type.

Scan the appropriate host

type barcode.

Interface / power cables

are loose.

Check for loose cable

connections.

Check the power

connection. Ensure the

power is connected if

required for your

configuration.

Possible Solutions

Nothing happens when

you operate the scanner

as instructed, or the

scanner performs

abnormally (laser does

not come on, scanner

emits frequent beeps).

Barcode is unreadable. Check the barcode to

make sure it is not defaced.

Try scanning test barcodes

of the same type.

Scanned data is

incorrectly displayed on

the host.

Scanner is not

programmed to work with

the host.

Check scanner host type

parameters or editing

options. Be sure proper

host is selected.

Laser comes on, but

barcode does not

decode.

Scanner is not

programmed for the

barcode type.

Be sure to program the

scanner to read the type of

barcode you are scanning.

Scanning angle /

distance is incorrect.

Move the scanner closer

to or further from the

barcode.