NISN-004812 TGX Spec 46300 SGN SS
Transcript of NISN-004812 TGX Spec 46300 SGN SS
PlatinumTGX SeriesWalkie Rider Tow Tractor / AC-Powered Models
10,000 lb.Rolling Load Capacity
Type Coupler HeightsMinimum Maximum
Jaw Coupler in (mm) 9.0 (228) 14.9 (380)
Tow Eye in (mm) 9.3 (236) 15.3 (387)
Pin & Clevis in (mm) 7.3 (186) 13.3 (337)
Dimensions
TGX series
Adjustable Coupler PlatesCoupler plate allows each type of coupler to be adjustable in 1" increments
Pin & Clevis
Jaw Coupler
Foot-actuatedrelease.
55.7"
11
30.1"
20° 20°
33%
2.5"
8.25"
25%
31%14.9" (Max jaw coupler height)
9" (Min jaw coupler height)13
95°
95°
10
17
16
16"
13.5"
TGX20N Walkie
Tow Eye Pin and ClevisJaw Coupler
Tow Eye
2
Manufacturer’s Name Nissan
Model Model designation TGX20N
Long model code TGXT2W4G20NV
Rolling Load Capacity lb (kg) 10,000 (4535)
Power Type Electric 24 Volt
Operator Type Stand-up Tow Tractor
Tire Type Drive tire Solid Rubber
Trail wheels Poly
Wheels Drive/trail (x=driven) number 1x / 2
Overall Dimensions Width in (mm) 35.1 (890)
Length - less coupler in (mm) 52.8 (1340)
Height - to top of steerhead in (mm) 55.7 (1415)
Wheelbase in (mm) 32.7 (830)
Front Overhang in (mm) 8.25 (210)
Grade Clearance Under chassis % 31
Turning Radius Minimum outside in (mm) 41.0 (1040)
Including handle (at 90°) in (mm) 46.3 (1175)
Truck Weight No load, without battery lbs (kg) 1195 (545)
Tires / Wheels Drive tire - dia. x width in (mm) 10 x 4 (254 x 102)
Trail wheels - dia. x width in (mm) 7 x 3 (178 x 76)
Speed - Travel No load mph (kph) 9.1 (14.6)
Full load mph (kph) 5.6 (9.0)
Drawbar Pull Normal lb (N) 225 (1000)
Maximum lb (N) 710 (3158)
Compartment Size1 Length x Width x Height in (mm) 33.3 x 13.5 x 31.6 (850 x 345 x 805)
Amp Hr Capacity Max (6-hr) Ah 840
Weight Min / Max lb (kg) 855 / 1500 (390 / 680)
Lead Length Position “B” in (mm) 20 (508)
Connector type SB-175 Red
Battery Roller (Option) Height from floor in (mm) 7.05 (180)
10,000 lb. rolling load capacity
Main Truck Specifications
CH
AR
AC
TER
ISTI
CS
DIM
EN
SIO
NS
SPEE
DS
BAT
TER
Y
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
3
1Battery compartment size with optional rollers & side gates - 30.9 x 13.5 x 31.6 (785 x 345 x 805)
Optional convenience tray keeps operator items organized.
Adjustable steerhead includes two butterfly controls allowing thumb or finger-tip actuation of travel and direction.
Rugged twin picking steps designedwith traction padding are available asoptional equipment.
Standard jaw coupler has a robustdesign for secure towing. Its foot-operated release is conveniently located inside the operator compartment.
Battery roller design provides easierbattery change out. Includes removableside gates.
Optional multi-function LCD digitaldisplay includes PIN codes to restricttruck access, selectable performancemodes, battery discharge indicator andspeedometer. It also offers on-board diag-nostics, troubleshooting and adjustment.
Technical Information
Platinum TGXseries
Standard Equipment
1. 24-volt electrical system2 Brushless AC drive motor and
controller system3. Multi-function digital display
includes battery dischargeindicator with horn beep at low battery, (2) hour meters, and fault-code display
4. Digital CAN-bus communications5. Programmable performance
parameters, including speedsettings up to 9.1 mph
6. Adjustable steer head with butterfly speed control
7. Fingertip accessible horn buttons8. Coast control with integrated
sidetracker9. Large operator platform with
antifatigue cushioned mat10. Padded front wall and operator
backrest11. Electronic horn12. On/off key switch13. Heavy-duty steel hood and large
front bumper14. Automatic jaw coupler with foot-
operated release15. Rubber drive tire with string
guard16. Heavy-duty, poly trail wheels with
string guards17. Regenerative braking18. Spring applied/electronically
released brake system with pushbutton parking brake
19. Sealed switches and controllerfor wet, cooler and freezer applications
20. Motor and controller thermalprotection
21. Powder-coat paint finish
Optional Equipment
1. Multi-function LCD display with:• PIN access• Selectable performance
modes• BDI and speedometer• On-board diagnostics and
troubleshooting2. Fixed steer head3. Twin picking steps4. Towing eye, pin and clevis, and
other coupler designs available5. Magnetic mount convenience
tray with stretch wrap holder6. Battery compartment rollers with
side gates7. Battery gate interlock8. Non-marking rubber, traction
rubber, or flat poly drive tire options
9. Rubber or non-marking trail wheels
10. Travel alarm11. Toggle switch
Ergonomics & Operator Comfort
T-style, adjustable steer headcombined with cushioned platformand fully padded compartment provide an impressive workplace toachieve maximum operator comfortand reduced fatigue resulting in sustained productivity. The steerhead’s wide, 190º steering arc allowsfor precise maneuvering in tightspaces with minimal effort. Itsergonomic layout of soft touchswitches includes two large thumb-actuated butterfly speed controls forsimple operation.
Roomy, low profile compartment (8.8"platform height) permits easyentry/exit and walk-through. A cushioned platform mat providesadded comfort.
The truck’s standard coast controloffers increased efficiency by allowingthe truck to coast for more efficientorder picking. Actuated by switchesconveniently located on either side ofthe control head, the sidetracker feature allows the operator to walkbeside the truck while performinglow-level order picking, for greater efficiency and productivity.
Efficient Performance
Heavy-duty 5.2Hp, brushless, three-phase AC drive motor provideshigh power and torque to handletough applications, with peak performance throughout the batteryrange. Longer run times per batterycharge are achieved by using lessenergy per cycle.
For enhanced efficiency, its advancedmotor controller/AC inverter electronically delivers power, asneeded, to the AC drive motor. Thissystem offers programmable regenerative neutral braking and proportional plugging. Its AC designeliminates forward and reverse contactors, and features electronictravel speed control for precise, efficient performance.
Optional Multi-Function LCD Display
An optional multi-function LCD display offers PIN codes to restricttruck access, selectable performancemodes for customized productivity,and a battery discharge indicator withgraphic representation of remainingbattery charge. Plus, with its on-board diagnostics, troubleshooting,and adjustment, a service tech canmake adjustments and perform maintenance without the need for aseparate handset tool.
Smart Electric Brake
Electrical braking system utilizesregenerative motor torque prior to discbrake actuation, for less componentwear and longer life. The spring-applied/electronically released discbrake system eliminates neededadjustments, for reduced maintenance.The service/park brake can be activated by pressing either brake button on the steer head.
Automatic Jaw Coupler
The standard heavy-duty automaticjaw coupler is equipped with a foot-operated release pedal, locatedinside the operator compartment.Optional couplers are also available(see page 2 for details).
Wheels
Wide drive and trail wheels offerincreased floor surface contact andstring guards help prevent debris fromgetting into axles and bearings.
Drive Unit Assembly
Vertically-mounted, balanced drivesystem with drive motor, transmissionand drive tire, reduces steer effort andprevents unbalanced torque conditions. Quiet, spiral beveled geardrive system with sealed ball bearings,provides solid performance with lowsteer effort. Five-nut removal of thedrive tire simplifies replacement whenneeded.
Ease of Maintenance
Brushless AC drive motor uses fewercomponents and requires less maintenance for lower operatingcosts. Easily accessible, rotationsensing encoder is externally mounted on the drive motor for simplified replacement. Motor andcontroller feature thermal protection
system to slow or shut down truck inresponse to high temperatures.
Digital CAN communication betweenthe controller and steer head reducesthe number of wires in the steer headharness, for reduced maintenance.Hall Effect speed and accelerationcontrol sensor simplifies maintenanceand limits downtime due to its non-contact design, with no mechanicalwiping action, potentiometers, orheaters. Onboard diagnostics simplifies maintenance.
One-piece cover removal makesaccess to the drive unit, and majorcomponents quick and easy. All lubrication fittings are easily accessible with the truck upright.
Environmental
All components are designed to withstand wet, cold and/or freezerapplications to -20º F (-28.9º C). Themain controller features an ingressprotection rating of IP65 against dustand moisture intrusion.
SS-TGXN 02-10Printed in U.S.A.
Nissan Forklift Corporation reserves the right to make product changes relating to colors, equipment, specificationsor available options without notice. For more information,contact your Nissan Forklift representative.
www.nissanforklift.com