New Novelties - WEICON Deutschland · The spray can be used as permanent lubrication in many...
Transcript of New Novelties - WEICON Deutschland · The spray can be used as permanent lubrication in many...
Novelties New
Products
Favourites
Adhesive Finder
Areas of
applicationAreas of
use
Downloads
Trade fairs
Print media
Company
Current developments
Code scanner
www.weicon.com/app
Simply find solutions.
WEICON App Available now!
2
Top-Lub-FluidAdhesive lubricant for sensitive areas
Top-Lub-Fluid is a special adhesive lubricant and has an NSF registration for the foodstuffs sector, meaning that it can be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries.
Top-Lub-Fluid is particularly adherent and pressure- resistant, with excellent penetration properties, and is also noise-damping and water-repellent. The spray prevents elongation, friction and wear.
Due to its special formula and the resulting NSF registration, WEICON Top-Lub-Fluid can contribute towards the improvement of workplace safety and health protection.
The spray can be used on toothed wheels and worm gears, on joints and couplings, on rollers and bearings, on chains and wire cables or on spring assemblies as well as in numerous industrial fields.
Colour slightly yellowish
Odour neutral
Features synthetic, transparent
Temperatureresistance
-20°C to +250°C (-4°F to 482°F)
Storage stability
24 months
Technical data
Clearance certificate for direct use with foods in accordance with USDA H2
400 ml11512400
PTFE-FluidDry lubricant for sensitive areas
PTFE-Fluid is a special dry lubricant with strong anti-adhesive effect, and has an NSF registration for the foodstuffs sector. This means that it can be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries.
Due to the high proportion of PTFE, the spray provides an anti-adhesive effect through which the friction value on the coated surfaces is substantially reduced. PTFE-Fluid is grease-free and adheres to all metal, plastic and wooden surfaces. The coating repels dirt, dust and water and is resistant against oils, greases and many chemicals. Due to its special formula and the resulting NSF registration, WEICON PTFE-Fluid can contribute towards the improvement of workplace safety and health protection.
The spray can be used as permanent lubrication in many sensitive industrial applications such as on sliding and running rails and guides, on conveyor belts, transport rollers and slides, on tilt mechanisms, locks and hinges, on cutting tools and packaging machines, for shafts in plastic bearings and as a coating for solid seals and assembly aid for seal packs.
Colour whitish, transparent
Odour almost odour-free
Features PTFE basis
Temperature resistance
-180°C to +260°C (-292°F to +500°F)
Storage stability
24 months
Technical data
Clearance certificate for direct use with foods in accordance with USDA H2
400 ml 11301400
Maintenance of a cooler unit's rubber gaskets
Lubricating a dough mixer's drive coupling
3
Novelties 2016
Fast CleanerCleaner and degreasing agent for sensitive areas
Fast Cleaner is used to clean and degrease surfaces which are bonded or sealed using WEICON adhesives and sealants, or which should be coated using WEICON metal sprays.
Fast Cleaner is pH-neutral and material-compatible, and can be used on many different materials such as metals, glass, ceramics and most rubbers and plastics.
Due to its special formula and the resulting NSF registration, the Fast Cleaner can contri-bute towards improvements in occupational safety and health protection.
500 ml11212500
Colour colourless
Odour solvent
Features NSF K1/K3 approval
Temperature resistance
-10°C to +50°C (-14°F to -58°F)
Storage stability
24 months
Technical data
NSF K1: Solvent cleaners – Nonprocessing area products; NSF K3: Solvent cleaners – Adhesives/glue removers
Rust Loosener FluidPenetrating oil for sensitive areas
Rust Loosener Fluid is physiologically harmless and has an NSF registration for the foodstuffs sector. This means that it can be used in the foods and beverages industry and in the pharmaceuticals and cosmetics industries.
Rust Loosener Fluid loosens rusted and oxidised screw connections, bolts, levers, joints and hinges as well as seized mechanisms on components. Due to its excellent penetrating properties, Rust Loosener Fluid can also penetrate into the smallest cavities. It secures the function of mechanical parts and electrical contacts. The spray lastingly protects against corrosion and oxidation. It cleans and cares for metal surfaces, mechanical parts and electrical systems.
Due to its special formula and the resulting NSF registration, Rust Loosener Fluid can contribute towards the improvement of workplace safety and health protection.
Colour beige
Odour almost odourless
Features loosens, lubricates, cleans and protects
Temperatureresistance
-20°C to +150°C (-4°F to +302°F)
Storage stability
24 months
Technical data
Clearance certificate for direct use with foods inaccordance with USDA H1
400 ml11154400
W 44 T®-FluidMultifunctional oil for sensitive areas
W44T-Fluid is a physiologically harmless multifunctional oil and has an NSF registration for the foodstuffs sector. This means that it can be used in the foods and beverages industry and in the pharmaceutical and cosmetics industries.
The resin and acid-free oil unites lubrication, water displacement, corrosion protection, cleaning and conservation in one product due to a special active ingredient formula and excellent penetration properties.
W44T-Fluid loosens seized screw connections, bolts, fittings, locks and valves, and penetrates and dissolves rust. It displaces
Colour beige
Odour almost odour-free
Features Loosens, lubricates, protects, separates and maintains
Temperatureresistance
-20°C to +150°C (-4°F to +302°F)
Storage stability
24 months
Technical data
Clearance certificate for direct use with foods in accordance with USDA H1
the humidity from electrical contacts, prevents leakage currents and facilitates the start-up of wet motors.
400 ml11253400
WEICON Flex+bond is strong, permanently elastic, tempera-ture resistant from -40°C to +90°C (-40°F to +194°F), weather resistant, resistant to UV rays, overpaintable (wet in wet), sandable and resistant to ageing and salt water. It is free of silicone, isocyanate, halogens and solvents.
Flex+bond®
Highly elastic and strong
*Corresponds approximately with the stated RAL colour shades
White: RAL 9003*
200 ml13350200Press pack
Black: RAL 9004*
200 ml13352200Press pack
Grey: RAL 7000*
200 ml13351200Press pack
transparent
200 ml13353200Press pack
Plast-o-Seal®Permanently plastic universal sealantSolvent free with no unpleasant odourEnables immediate assembly
Press pack
230 g30000230
Properties and advantages:
• To seal level machined flanges of machine, gearbox and motor housings • To support and optimise old and new solid seals made of paper, cork, felt, etc. • Free of solvents – odourless • Infinitely ductile before and after assembly• Easy removal• Very high resistance against fuels, mineral oils as well as against water and air, methanol and glycose compounds, antifreeze, kerosene, fluorocarbon coolants, etc.• Maximum filling of gaps up to 0.10 mm (without solid seal)• Non-sagging – can also be processed on vertical surfaces• Temperature resistant from -50°C to +200°C (-58°F to +392°F); for a short time up to +250°C (+482°F)• Non-corrosive• Free of substances impairing paint-wetting, such as silicones • Fluorescent colour
Support of a solid seal at a gear block
4
5
200 ml26200200
Press pack
Copper PasteProtecting, separating and lubricating agent for highly stressed parts in high-temperature applicationsWEICON Copper Paste is a protective substance, release agent and lubricant, resistant to high temperatures (-20°C to +1,100°C /-4°F to +2,012°F) and corrosion-resistant, strongly adhesive and sulphur-, lead- and nickel-free.
WEICON Copper Paste is used as an assembly lubricant for all kinds of threaded joints and slising surfaces. It forms an effective lubricating and separating film which protects the functional surfaces on plug-in tools, wear bushings, screws and all kinds of threaded, plug-in and bayonet joints against corrosion and seizing.
It can be used to reduce vibration on brake blocks and guides, brake cams and pins, car and truck battery terminals and other electrical connections, wheel bolts and nuts and on wear bushings at electrical, compressed air and hydraulic hammers. The product can be used in many industrial applications.
*Corresponds approximately with the stated RAL colour shades
Black-SealExtremely resistant against oil and grease
WEICON Black-Seal adhesive and sea-lant is black, high-temperature resistant (+280°C/+536°F), free of solvents, strong, oil-resistant, grease-resistant, pressure-resi-stant, resistant to ageing and extremely elastic (breaking elongation of approx. 500%)
Black-Seal is suitable for bonding and sealing in applications where particularly high oil and grease resistance is required.
WEICON Black-Seal can be used on gearbox, valve and casing covers, oil sumps and oil pumps, water pumps, gearboxes and axles, flanges, tanks and containers and in many other areas.
Black: RAL 9005*
200 ml13051200
Press pack
Anti-SeizeReliable protection against corrosion, seizing and cold welding
WEICON Anti-Seize is high-temperature resistant (-180°C to +1,200°C/-292°F to +2,192°F) and exhibits exceptionally good release characteristics.
Anti-Seize is used as a protecting, separating and lubricating agent for highly stressed parts. Ideally compatible solid contents and selected additives enable a wide range of usage.
It protects against corrosion, seizure and wear, stick-slip phenomena, oxidation, fretting corrosion and electrolytic reactions („cold welding“).
Reinforcement of cylinder head gasket
200 ml26000200
Press pack
Novelties 2016
Threadlocking VarnishProtection and safety against manipulation
Threadlocking Varnish is a solvent-based, fast drying securing and marking varnish with good adhesion to many materials.
The varnish serves as a removable lock, as protection against tampering by unauthorised persons, as a cover for electrically-conductive parts and as protection against corrosion and influencing through contact.
The Threadlocking Varnish is durable against water, petrol, diesel, mineral oil, paraffin oil and diluted acids and lyes.
The Threadlocking Varnish is essential for locking screw connections of all kinds, protecting against manipulation and unauthorised loosening of screws and connections, documenting quality assurance measures, production control and product inspection through a varnish seal for the visual inspection of connected, adjusted parts.
Threadlocking Varnish is available in the colours yellow, green and red.
30020030 red: RAL 3000*
*Correspondsapproximately with the stated RAL colour shades
30 g
30 g30022030 green: RAL 6010*
30 g
30021030 yellow: RAL 1021*
WEICONLOCK AN 305-78Pipe and thread sealing for passive materials*, DVGW approval
high viscositymedium strengthdisassembly with normal tools
50 ml30578150
200 ml30578200
WEICONLOCK AN 302-44Threadlocking for passive materials*,DVGW approval
Passive materials: (slow hardening)
• High-alloy steel• Aluminium, nickel, zinc, gold• Oxide films• Chromate coats• Anodic coatings• Plastics and ceramics
*
higher viscositymedium strengthhard to disassemble
20 ml30244020
50 ml30244150
200 ml30244200
6
f
ast cure
also without Activ
ator
WEICON
LOCK
Threadlocking Varnish
7
WEICONLOCK AN 305-11 300 ml Pipe and thread sealing, DGVW approvalhigh viscosity • medium strength • disassembly with normal tools 30511300
WEICONLOCK AN 305-18 300 mlSurface seal for bridging large gaps with immediate sealing effect, high-temperature resistanthigh viscosity • high strength • hard to disassemble
30518300
WEICONLOCK AN 305-72 300 mlPipe and surface seal (with PTFE), immediate sealing effect, tested by the DVGWhigh viscosity • medium strength • disassemble with normal tools
30572300
WEICONLOCK AN 305-73 300 ml Surface seal for sealing flanges high viscosity • low strength • easy disassemble 30573300
WEICONLOCK AN 305-74 300 ml Surface seal for sealing flanges high viscosity • high strength • hard to disassemble 30574300
WEICONLOCK AN 305-77 300 mlThread sealing, DVGW and BAM approval for oxygenhigh viscosity • medium strength • disassemble with normal tools
30577300
WEICONLOCK AN 306-60 300 ml Jointing compound for worn out bearing rings and busheshigh viscosity • high strength • hard to disassemblel 30660300
The following products are also available in the new 300 ml SEMCO cartridge:i
Easy-Mix PE-PP 45Fast, high strength, process-safe
WEICON Easy-Mix PE-PP 45 is a two-component construction adhesive on the basis of methyl acrylate. It is in particular suitable for structural, high-strength bonding of low energy plastics like PE, PP and TPE.
In addition, WEICON Easy-Mix PE-PP 45 can be used as „universal adhesive“ for plastics like:• Rigid PVC (polyvinyl chloride)• PA (polyamide)• PC (polycarbonate)• ABS (acrylnitrile butadiene acrylate)• PMMA (polymethyl methacrylate)• Fibre reinforced materials (GRP,CRP,fibre glass etc.)
and many others. 35 ml
10661035
blackBonding of black PE profiles
Novelties 2016
Now also availablein black
8
Flex 310 RLTSealant for air conditioning/ventilation construction and cleanroom technology
Flex 310 RLT is a special one-component adhesive and sealant based on polyurethane, which was developed for the specific requirements of air conditioning/ventilation construction and for cleanroom technology.
Flex 310 RLT complies with the requirements according to VDI 6022 (sheet 1) It can be used in diverse ventilation and air conditioning systems in buildings and rooms for bonding and sealing of very different materials such as metals, many plastics, ceramics, wood, glass or stone.
Flex 310 RLT is permanently elastic and strong adhesive, and can be ground and painted over after curing. The flexible adhesive and sealant cures odourless; it is weather and UV-resistant, has excellent aging stability, is pasty and free of silicone.
300 ml13322310
Grey: RAL 7000*
Flex 310 M® LiquidLiquid, self-levelling
Flex 310 M Liquid is a self-levelling, one-component casting and coating mass based on polyoxypropylene.
Flex 310 M Liquid is permanently elastic and can be painted over after curing. The flexible adhesive and sealing substance cures odourless, it is weather and UV-resistant, has excellent anti-aging properties and is free of silicone.
Flex 310 M Liquid can be used in diverse applications for bonding and sealing of very different materials such as metals, many plastics, ceramics, wood, glass or stone and for insulation and impregnation.
White: RAL 9003*
*Corresponds approximately with the stated RAL colour shades
310 ml13333310
Speed-Flex Crystal is a quick-acting, strong and general-purpose power adhesive on MS polymer basis.
Due to its strong adhesive force, it can replace conventional fastening solutions such as screws, dowels or rivets. Speed-Flex Crystal is pasty and tight; thus even adhesions on vertical surfaces in interior and exterior areas can be easily carried out.
The new adhesive and sealing substance can be painted over "wet in wet", is resistant to aging, weather-resistant, UV-resistant and free of silicones, isocyanates, halogens and solvents.
Due to its crystal-clear curing properties, Speed-Flex Crystal is particularly suitable in areas which should remain visually appealing, where no adhesive seam should be visible. Thus e.g. transparent plastics, acrylic glass or other ma-terials can be quickly, cleanly and appropriately connected with each other.
Speed-Flex® CrystalCrystal-clear adhesion
310 ml13608310
The Smoothing Agent is a trans-parent mixture of non-ionic surface activators. Applying it makes it pos-sible to easily and cleanly smooth off all WEICON elastic adhesives and sealants such as silicone, MS polymers, polyurethane, etc. prior to skin formation.
Smoothing AgentSimple smoothing of many sealants
5 L13559505
500 ml13559500
Spray bottle
Primer E 500
Especially for silicones - for pre-treating non-ab-sorbent surfaces such as aluminium, steel, VA steel, brass, copper, zinc, tinplate and enamel, ceramics and glass as well as plastics such as ABS, PVC hard, PA6.6, GFC and many more.
250 ml13558025
certified for cleanroom technology according to VDI 6022
9
O-Ring Bonding Set Using the O-Ring Bonding Set, sealing rings out of all common materials can be produced in no time.
Set12508030
WEICON O-Ring Bonding Set consists of:
12603012 Contact VA 30 Black 12 g11207150 Surface Cleaner 150 ml12450010 Contact Primer 10 ml13250000 WEICON Safety Knife
1 2
3 4
5 6
Without pre-treatment, many plastics are unable to bond or bond only under certain conditions. When these plastics are pre-treated with WEICON Contact Primer, their surface structure changes. Thereby the joining of plastics, like polyethylene (PE) and polypropylene (PP) belonging to the polyolefine group which are usually difficult to bond, is made possible. Even modern thermoplastic elastomers (TPE), PTFE and related plastics as well as silicones, can be bonded when pre-treated with WEICON Contact Primer.
Contact Primer for Polyolefines
10 ml12451010
100 ml12451100
Pump Dispenser Pump Dispenser
Novelties 2016
10
W 44 T® Multi-SprayMultifunctional oil with multiple effect
WEICON W44T is a multifunctional product which, thanks to its special formula and outstanding creeping capacity, combines corrosion protection, water displacement, lubrication, conservation and cleaning in a single product.
W44T loosens seized threads, bolts, fittings and valves, penetrates and dissolves rust, dispels moisture and makes it easier to start wet motors.
It eliminates squeaky and creaky noises on hinges, guides, bearings and all types of joints and couplings. It cleans solled metal surfaces and leaves a long-lasting razor thin film which does not smear or stick and does not attract dust. It protects and preserves all types of tools, machines and electrical and mechanical precision devices and keeps them functional.
Bio-CutCutting oil
WEICON Bio-Cut contains no mineral oil, has water pollutant class 1 as a self-classification according to VwVwS (Verwaltungsvorschrift wassergefährdene Stoffe = German Administrative Regulation Regarding Water Pollutants), and is completely biodegradable.
Thanks to its particularly high lubricating effect, Bio-Cut enables high cutting speeds, long tool lives and thus also high tool cutting performance.
WEICON Bio-Cut can be used for drilling, turning, milling, grinding, sawing, punching and thread cutting in all industrial applications. 250 ml
15750002
Double NozzleOnly for the 500 ml product
NEW
500 ml
500 ml11251550
Bearing lubrication on a labelling machine
Lubrication of a fork mounting for forklifts
11
Crimp Set Pro Starter Set Pro
52880002
52880001
• Wire Stripper No. 7 Magic• Duo-Crimp No. 300• Shaker with wire ends
• Wire Stripper No. 5• Coax-Stripper No. 2• Cable Stripper No. S 4-28• Round Cable Stripper No. 13
Electrical Installation Sets
52881001 52881002 52881003 52881004
• Duo-Crimp No. 300• Round Cable Stripper No. 13
• Wire Stripper No. 5• Cable Stripper No. S 4-28
• Wire Stripper No. 5• Coax-Stripper No. 2
• Wire Stripper No. 5• Round Cable Stripper No. 13
These four special 2-piece sets offer suitable tools for very different applications in virtually any sector of industry.
MESSERSTAHLQualität aus Solingen
Cable Scissors No. 35For cutting and stripping Cu/Al cables and for crimping wire ends from 0.5 - 4 mm². The blades of the cable scissors are made of stainless special steel. The blade is equipped with a fine micro toothing to achieve a flush cut and to prevent the cable from slipping. The handles are made from an impact resistant, glass fibre reinforced plastic.
52000035Cut through a NYM wire
Quadro-Stripper No. 16Stripping and dismantling of all common round cables from 8 - 13 mm ø, hook blade and stripping range are integrated. Fast and easy longitudinal cut due to optimised cable routing in casing. Integrated stripping range for all flexible and solid conductors with the cross sections 0.5 mm2, 0.75 mm2, 1.5 mm2, 2.5 mm2, 4.0 mm2 and 6.0 mm2. Retractable hook blade that can be firmly locked in any position and is easy to exchange.
52000016Longitudinal cut on a NYM wire
Novelties 2016
All
spec
ifica
tions
and
rec
omm
end
atio
ns in
thi
s b
roch
ure
are
not
guar
ante
ed p
rop
ertie
s. T
hey
are
bas
ed o
n ou
r re
sear
ch r
esul
ts a
nd e
xper
ienc
e. H
owev
er, t
hey
are
non-
bin
din
g b
ecau
se w
e ca
nnot
be
resp
onsi
ble
for
com
plia
nce
with
the
pro
cess
ing
cond
ition
s as
we
are
not
awar
e of
the
use
r's
spec
ial
app
licat
ion
cond
ition
s. W
e ca
n on
ly p
rovi
de
a gu
aran
tee
for
the
cons
iste
ntly
hig
h q
ualit
y of
our
pro
duc
ts. W
e re
com
men
d th
at y
ou c
arry
out
you
r ow
n ap
pro
pria
te te
sts
to d
eter
min
e w
heth
er th
e p
rop
ertie
s yo
u re
qui
re c
an b
e ac
hiev
ed w
ith th
e sp
ecifi
ed p
rod
uct.
No
clai
ms
can
be
der
ived
. The
use
r b
ears
th
e so
le r
esp
onsi
bili
ty fo
r no
n-ap
pro
pria
te o
r ot
her
than
sp
ecifi
ed a
pp
licat
ions
.B
L/11
9011
02/
01/1
6/2
Novelties 2016
WEICON GmbH & Co. KG (Headquarters)
Königsberger Str. 255 · DE-48157 MünsterP.O. Box 84 60 · DE-48045 Münster
Germany
Phone: +49 (0) 251 9322 0 [email protected]
WEICON Middle East L.L.C.
Jebel Ali Ind Area 3 P.O. Box 118 216 · Dubai
United Arab Emirates
Phone: +971 4 880 25 05 [email protected]
WEICON SA (Pty) Ltd
Unit No. D1 · Enterprise VillageCapricorn Drive · Capricorn Park
Muizenberg 7945 (Cape Town) · South Africa
Phone: +27 (0) 21 709 0088 [email protected]
WEICON Inc.
20 Steckle Place · Unit 20 Kitchener · Ontario N2E 2C3 · Canada
Phone: +1 877 620 8889 [email protected]
WEICON Romania SRL
Str. Podului Nr. 1 547176 Budiu Mic (Targu Mures) · Romania
Phone: +40 (0) 3 65 730 763 [email protected]
WEICON Kimya Sanayi Tic. Ltd. Şti.
Yenibosna Mahallesi Yalçın Koreş Caddesi Arifağa Sokak No: 29 Kat: 3
34530 Yenibosna – Istanbul Turkey
Phone: +90 (0) 212 465 33 65 [email protected]
weicon.com
WEICON South East Asia Pte Ltd
5 Soon Lee Street Pioneer Point #03-56 · Singapore 627607
Phone: (+65) 6710 7671 [email protected]
Distributed by