nes thread repair tools: An EASY, cost effective and time ...
Transcript of nes thread repair tools: An EASY, cost effective and time ...
External Thread Repair
▪ External tools restore inch or metric, right hand or left hand fastener threads
▪ Floating cutters are self-adjusting to any pitch and size within range
▪ No need for calibration or identifying thread type ▪ Automatically chases good thread sections to repair the damaged parts
6URN2 (NES06040) 6URT2 (NES1A)
ITEM # MFR # DIAMETER (IN) DIAMETER (MM) PIPE DIAMETER
6URT2 NES1A 5/32” - 11/16” 4 - 19 up to 7/16”
6URT3 NES2 11/16” - 1.1/2” 17 - 38 3/8” - 1.1/8”
6URT4 NES3 1.3/8” - 6” 35 - 152 1” - 5.1/2”
6URN2 NES06040 5/32” - 1/2” 4 - 13 up to 1/4”
Internal thread repair
▪ One hand tool restores inch or metric, right hand or left hand fastener threads
▪ Floating cutters are self-adjusting to any pitch and size within range
▪ No need for calibration or identifying thread type ▪ Nylon pads available to avoid marring softer metals
6URP2 (NES21)
6URR0 (NES25)
6URP6 (NES23)
38C905 (NES27)
ITEM # MFR # DIAMETER (IN) DIAMETER (MM) PIPE DIAMETER
6URP2 NES21 5/16” - 7/16” 8 - 11 1/16” - 3/16”
6URP4 NES22 1/2” - 5/8” 12 - 16 1/4” - 3/8”
6URP6 NES23 11/16” - 13/16” 16 - 20 3/8” - 1/2”
6URP8 NES24 7/8” - 1.1/4” 22 - 32 1/2” - 7/8”
6URR0 NES25 1.1/4” - 2.1/8” 32 - 54 7/8” - 1.3/4”
6URR1 NES26 1.1/4” - 2.5/8” 32 - 68 7/8” - 2.1/4”
38C905 NES27 2.3/4” - 3.3/16” 69 - 81 2.3/8” - 2.3/4”
38C906 NES28 3.1/4” - 3.3/4” 82 - 95 2.3/4” - 3.1/4”
38C907 NES29 3.3/4” - 4.1/4” 96 - 108 3.1/2” - 3.3/4”
6URT3 (NES2) 6URT4 (NES3)
nes thread repair tools: An EASY, cost effective and time saving solution to thread repair problems
angloamericantools.com
combination thread repair sets
external thread repair sets
internal thread repair sets
▪ Replaces a huge array of taps and dies for cheaper and faster maintenance
▪ One hand tool restores inch or metric, right or left-hand fastener threads
▪ Self-adjusting to any pitch and size within range ▪ No need for calibration or identifying thread type
▪ Replaces a huge array of dies ▪ One hand tool restores inch or metric, right or left-hand fastener threads
▪ Self-adjusting to any pitch and size within range ▪ No need for calibration or identifying thread type
▪ Replaces a huge array of taps ▪ One hand tool restores inch or metric, right or left-hand fastener threads
▪ Self-adjusting to any pitch and size within range ▪ No need for calibration or identifying thread type
6URN6 (NES1015)
6URN8 (NES1025)
6URN7 (NES1017)
6URN1 (NES01044)
6URN4 (NES1007) 6URN5 (NES1008)
ITEM # MFR # CONTENTS SET TYPE EXTERNAL CAPACITY
6URT1 NES1000 NES1A, NES2 External 5/32” - 1.1/2”(4 - 38 mm)
6URP0 NES1300 NES1A, NES2, NES3 External 5/32” - 6”(4 - 152 mm)
6URT1 (NES1000) 6URP0 (NES1300)
ITEM # MFR # CONTENTS EXTERNAL INTERNAL
6URN6 NES1015 NES1A, 21, 22 5/32” - 11/16” (4 - 19 mm)
5/16” - 5/8”(8 - 16 mm)
6URN7 NES1017 NES1A, 21, 22, 23 5/32” - 11/16”(4 - 19 mm)
5/16” - 13/16”(8 - 20 mm)
6URN8 NES1025 NES1A, 2, 21, 22, 23, 24 5/32” - 1.1/2”(4 - 38 mm)
5/16” - 1.1/4”(8 - 32 mm)
6URN1 NES01044 NES06040, TM20, TM21 5/32” - 1/2”(4 - 13 mm)
#12 - 1/2”(5 - 12 mm)
ITEM # MFR # CONTENTS TYPE CAPACITY
6URN4 NES1007 NES21, 22, 23 Internal 5/16” - 13/16”(8 - 20 mm)
6URN5 NES1008 NES21, 22, 23, 24 Internal 5/16” - 1.1/4”(8 - 32 mm)
6URN9 NES1036 NES24, 26, Sleeve 07259, 07269 Internal 7/8” - 2.5/8”(22 - 68 mm)
nes thread repair tools: An EASY, cost effective and time saving solution to thread repair problems
angloamericantools.com