OBJECTIVE:

To obtain a leading Safety Officer position in Workplace Safety & Health by applying my knowledge ,experience & skills to reduce injuries, accidents and health problems within the workplace.

To work as an active member of the Site Safety Committee and promoting zero accident culture in the workplaces

Continuous learning and developmentPERSONAL DATA

NAME EldanizSURNAME MammadovDATE OF BIRTH 23.09.1978PLACE OF BIRTH Baku, AzerbaijanNATIONALITY AzeriCITIZENSHIP Citizen of AzerbaijanMARITAL STATUS MarriedMILITARY STATUS 2007-2008 served in Zagatala , AzerbaijanADDRESS 37/53 Choban-zade str. Baku, Azerbaijan

EDUCATION

THE NAME OF THE EDUCATION , ENTERPRISE GRADUATION YEAR

QUALIFICATION( DEGREE )

Azerbaijan Languages University;Faculty: European Studies, russian section 2003 - 2007 bachelor’s degree

Azerbaijan State Marine Academy , Faculty: Electro engineering, russian section 1994 - 1998

bachelor’s degreeTechnical Diploma

WORK EXPERIENCE 2012 February - present KCA Deutag Drilling and Engineering offshore company West Chirag platform ( C.O.P. Project )

Position - General Assistant (G.A ) grade 2

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Offloading / Back loading drilling equipment, containers, baskets etc. from supply vessels, as well as servicing well units. The duties also include supplying equipment to rig floor when required, keeping pipe deck tidy and clean and banking to the crane as supply loads are moved to the rig floor. Driving Forklift Truck. Carry out weekly inspection of Pipe deck, other drilling areas. Comply all safety procedures according to Permit to Work System, Risk assessment etc.

2014 August Temporary promoted – Rig Clerk position

ESSENTIAL DUTIES AND RESPONSIBILITIES  include the following: Carry out all administrative duties generated by rig activity, so as minute meetings etc.. He is responsible for safe & efficient transfer of personnel to and from offshore with close interaction with onshore Logistics. Book all personnel due to leave the platform on a vessel transfer/helicopter flight liaising with operational and Group support personnel. Maintain files on personnel training, holiday requests and sickness. Muster checker.

2013 – 2018 periodically Temporary promoted – Pipe Operative ( Roughneck ) position ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Trips pipe, consists of using slips, tongs and elevators and makes connections while drilling. Shaker duties: Monitors mud weight while drilling. Inspections of all safety equipment, carry out weekly dropped object inspections of the derrick. Checks dies in slips and tongs and all safety and riding belts to make sure they are in good condition. Responds to emergency situations and major mechanical or structural failures. Must be capable of quickly evacuating the facility to avoid injury during emergencies.

1

WORK EXPERIENCE 1998 – 1999 motorman CASPIAN SHIPPING COMPANY

ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Controlling, checking, testing, and maintaining also inspecting marine equipment and machinery in order to draw up work requests and job specifications. Also for installation and repair of marine apparatus and equipment.

COURSE, TRAINING AND CERTIFICATES

TRAINING AND CERTIFICATES ACHIEVED NEBOSH International General Certificate in Occupational Health and Safety

IGC-1 Management of international health and safety GC-2 Controlling workplace hazards GC-3 Health and safety practical application

NEBOSH Student Number 00376740

BASIC OFFSHORE SAFETY INDUCTION AND EMERGENCY TRAINING including Helicopter Underwater Escape Training and EBS - (Emergency Breathing Systems) OFFSHORE EMERGENCY RESPONSE TEAM MEMBER Control Of Work PERFORMING AUTHORITY ( UPSTREAM ) Cert. expire 29.11.2020

FIRE TEAM MEMBER___________________________________________________________________________ FURTHER OFFSHORE EMERGENCY TRAINING ( FOET ) OPITO Approved Training / Course Code 5858 Valid until 04.02.2020___________________________________________________________________________

Courses held at the AMERICAN PETROLEUM INSTITUTE The licensed provider of API-U e learning

SAFETY COURSES & CERTIFICATES: JOB SAFETY ANALYSIS, BASIC (U.S. General Industry Version) (JSA-1-0) MATERIAL SAFETY DATA SHEETS (U.S. General Industry Version) (MSD-1-0) OCCUPATIONAL SAFETY AND HEALTH PROGRAMS (U.S. General Industry Version) (OSH-1-0)

OSHA, INTRODUCTION (U.S. General Industry Version) (INO-1-0) PERFORMING SAFETY AUDITS (U.S. General Industry Version) (AUD-1-0) OSHA REPORTING AND RECORDKEEPING (U.S. General Industry Version) (OSH-3-0) COLD STRESS (U.S. Onshore Oil & Gas Version) (OGS-20-0) CONFINED SPACE AWARENESS (U.S. Onshore Oil & Gas Version) EXCAVATION AND TRENCHING (U.S. Onshore Oil & Gas Version) (OGS-10-0) FALL PROTECTION (U.S. Onshore Oil & Gas Version) (OGS-15-0) FIRE PREVENTION (U.S. Onshore Oil & Gas Version) (OGS-3-0) HAZARD COMMUNICATION (U.S. Onshore Oil & Gas Version) (OGS-7-0) HEARING CONSERVATION (U.S. Onshore Oil & Gas Version) (OGS-11-0) HEAT STRESS (U.S. Onshore Oil & Gas Version) (OGS-19-0) HOT WORK - ARC WELDING (U.S. Onshore Oil & Gas Version) (OGS-6-0) HYDROGEN SULFIDE SAFETY (U.S. Onshore Oil & Gas Version) (OGS-1-0) LOCKOUT - TAGOUT (U.S. Onshore Oil & Gas Version) (OGS-17-0) OIL RIG SAFETY, BASIC (U.S. Onshore Oil & Gas Version) (OGS-18-0) PERSONAL PROTECTIVE EQUIPMENT (U.S. Onshore Oil & Gas Version) (OGS-5-0) PORTABLE FIRE EXTINGUISHERS (U.S. Onshore Oil & Gas Version) (OGS-2-0) ASBESTOS HAZARD AWARENESS (U.S. General Industry Version) (ASB-1-0) BACK INJURY PREVENTION (U.S. General Industry Version) (JSA-2-0) BENZENE AWARENESS (U.S. general industry version) (chm-3-0) BLOODBORNE PATHOGENS (U.S. General Industry Version) (BBP-1-0) CPR REFRESHER (U.S. General Industry Version) (CPR-1-0)

2

CARCINOGENS AWARENESS, BASIC (U.S. General Industry Version) (CHM-2-0)

COURSE, TRAINING AND CERTIFICATES Courses held at the AMERICAN PETROLEUM INSTITUTE The licensed provider of API-U e learning

SAFETY COURSES & CERTIFICATES: ELECTRICAL SAFETY - ARC FLASH (U.S. General Industry Version) (ELT-4-0) ELECTRICAL SAFETY - BASIC (U.S. General industry version) (elt-1-0) ELECTRICAL SAFETY - GROUNDING (U.S. general industry version) (elt-2-0) EMERGENCY ACTION PLANS FOR OFFICE EMPLOYEES (U.S. General Industry Version) EMERGENCY RESPONSE, BASIC (U.S. General Industry Version) (EMR-1-0) EXCAVATION AND TRENCHING (U.S. General Industry Version) (EXC-1-0) FALL PROTECTION, INTRODUCTION (U.S. General Industry Version) (FAL-1-0) FIRE SAFETY, BASIC (U.S. General Industry Version) (FRS-1-0) FIRST AID, BASIC (U.S. General Industry Version) (BFA-1-0) FLAMMABLE AND COMBUSTIBLE LIQUIDS (U.S. General Industry Version) (FLL-1-0) FORKLIFT OPERATOR TRAINING - FUNDAMENTALS (U.S. General Industry Version) (FLO-1-0)

FORKLIFT OPERATOR TRAINING - SAFE MAINTENANCE (U.S. General Industry Version) (FLO-4-0)

FORKLIFT OPERATOR TRAINING - SAFE OPERATIONS (U.S. General Industry Version) (FLO-2-0)

FORKLIFT OPERATOR TRAINING - SAFE TRAVELING AND LOADING (U.S. General Industry Version) (FLO-3-0)

HAND AND POWER TOOL SAFETY (U.S. General Industry Version) (HPT-1-0) HAZARD COMMUNICATION, INTRODUCTION (U.S. General Industry Version) (HZC-1-0)

HEARING CONSERVATION (U.S. General Industry Version) (HRC-1-0) HEAT STRESS IN THE WORKPLACE (U.S. General Industry Version) (HSW-1-0) HOT WORK - ARC WELDING (U.S. General Industry Version) (HTW-1-0) INCIDENT INVESTIGATION (U.S. General Industry Version) (INV-1-0) INDOOR AIR QUALITY (U.S. General Industry Version) (IAQ-1-0) INDUSTRIAL ERGONOMICS (U.S. General Industry Version) (ERG-1-0) INDUSTRIAL HYGIENE, INTRODUCTION (U.S. General Industry Version) (IND-1-0) LAB SAFETY AWARENESS, BASIC (U.S. General Industry Version) (LAB-1-0) LADDER SAFETY (U.S. General Industry Version) (LDR-1-0) LEAD AWARENESS (U.S. General Industry Version) (PBA-1-0) LOCKOUT-TAGOUT (U.S. General Industry Version) (LOT-1-0) MACHINE GUARDING (U.S. General Industry Version) (MCG-1-0) MATERIALS HANDLING (U.S. General Industry Version) (MAT-1-0) OFFICE ERGONOMICS (U.S. General Industry Version) (ERG-2-0) OFFICE SAFETY, BASIC (U.S. General Industry Version) (BOS-1-0) OVERHEAD AND GANTRY CRANE SAFETY (U.S. General Industry Version) (OCS-1-0) PERSONAL PROTECTIVE EQUIPMENT (U.S. General Industry Version) (PPE-1-0) RADIATION SAFETY (U.S. General Industry Version) (RAD-1-0) RESPIRATORY PROTECTION, BASIC (U.S. General Industry Version) (RSP-1-0) SCAFFOLD SAFETY, BASIC (U.S. General Industry Version) (SCF-1-0) SEVERE WEATHER SAFETY AND OUTDOOR WORK (U.S. General Industry Version) (SVW-1-0)

SLIPS, TRIPS AND FALLS (U.S. General Industry Version) (STF-1-0) USING PORTABLE FIRE EXTINGUISHERS (U.S. General Industry Version) (FRS-2-0) WAREHOUSE SAFETY (U.S. General Industry Version) (WHS-1-0) CONFINED SPACE AWARENESS (U.S. General Industry Version) (CFS-1-0) COLD STRESS (U.S. Onshore Oil & Gas Version) (OGS-20-0) COLD STRESS IN THE WORKPLACE (U.S. General Industry Version) (CSW-1-0) COMPRESSED GAS (U.S. General Industry Version) (CGS-1-0) CHEMICAL HYGIENE (U.S. General Industry Version) (LAB-2-0) CHEMICAL SAFETY, BASIC (U.S. General Industry Version) (CHM-1-0)

3

COURSE, TRAINING AND CERTIFICATES

SAFETY COURSES & CERTIFICATES:Courses held at the ENERMECH

HAZARD IDENTIFICATION FALLS & FALLING OBJECTS PERMIT TO WORK USER AND TOOLBOX RISK IDENTIFICATION CARD COSHH AWARENESS CONFINED SPACE ENTRY / BREATHING APPARATUS USER FORKLIFT OPERATOR COURSE RIGGING & LIFTING / BANKSMAN & SLINGER NOISE AWARENESS CARGO CARRYING UNITS HANDLING ELECTRICAL AWARENESS MANUAL HANDLING AWARENESS ENVIRONMENTAL AWARENESS LSA / NORM AWARENESS H2S AWARENESS BASIC OIL & SPILL AWARENESS GAS TESTING AWARENESS CHEMICHAL AWARENESS WORKING AT HEIGHT AWARENESS FUNDAMENTAL PRINCIPLES OF INDUSTRIAL HYGIENE PAINTING , HOUSEKEEPING L.O.L.E.R REGULATIONS INSTRUCTION PRESSURE & LEAK TESTING TUBULAR CARE HAND INJURY PREVENTION

BEHAVIORAL SAFETY OBSERVATION TRAINING

12 DAY ROUGHNECK / ROUSTABOUT Practical and Theoretical Training Course

Course held at the Ullrigg Training Facility, Stavaner , NORWAY

STUCK PIPE PREVENTION – TRAIN WRECK AVOIDANCE

RIGGING LOFT CONTROL COURSE

PIPE DECK PIPE HANDLING MACHINE OPERATOR COURSE HUMAN MACHINE INTERFACE (Understanding of AKER drilling equips/ops.)

SAFETY COURSES & CERTIFICATES: HANDS SAFE / FREE KIT - Push/Pull Poles & Tag Lines for General Cargo Handling Dropped object Prevention

4

CONTACTS Phone: 012 376 66 10 , mob: +994 55 877 11 40 E - MAIL eldaniz.mammad@gmail.com

NOTES Currently studying the Technical and occupational safety standards and

guidelines for Supervisors and specialists courses provided byMINISTRY of EMERGENCY SITUATIONS of the REPUBLIC OF AZERBAIJAN.

I have got HSE Behavioral Award 2017 at BP offshore platform( Award is attached to CV)

LANGUAGES KNOWLEDGELanguage Speaking Writing Reading

Azeri Fluently excellent excellentRussian Fluently excellent excellentEnglish Excellent excellent excellentTurkish Good excellent excellent

COMPUTER SKILLSMicrosoft windows

MS Office ( Word , Excel, Power Point )Outlook express , Internet Explorer

Hope for the future collaboration!

5

6

7