NDT
22
description
NDT
Transcript of NDT
Page 61
WELDING GAUGES
AWS Weld Gauge
V-WAC Gauge
WTPS Weld Gauge
Adjustable Fillet Weld Gauge
Weld Fillet Gauge Sets
Single Purpose Welding
Gauge
Gauges
Model Price (pound)
ldquoHI-LOrdquo Weld Gauge (GAL) 16900
Adjustable Fillet Weld Gauge (GAL) 11700
ldquoHI-LOrdquo Single Purpose Weld-Deerman Gauge 4900
V-WAC Gauge 4900
WTPS Weld Gauge With Calibration Block 9900
Fillet Weld Gauge Set 5980
Cambridge Type Weld Gauge Welding Institute (New version ) 6900
AWS Weld Gauge 4900
Pipe Pit Gauge (Thorpe Model 119) 5900
Weld Profile Needle Gauge 5rdquo Metal 1200
Skew-TCalculator Fillet Gauge 21500
Page 62
COATING TEST EQUIPMENT
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Adhesive Testing
Cat Number Price (pound)
106 Portable Adhesive Tester ndash Various Scale Ranges 55250
107 Cross Hatch Cutter and Adhesive Tape for Cross Hatch Test 13260
108 Elcometer Hydraulic Adhesion Tester Tongs 230 volt UK Plug
138190
108 Elcometer Hydraulic Adhesion Tester Tongs 230 volt Euro Plug
138190
108 Elcometer Hydraulic Adhesion Tester Tongs 110 volt No Plug
138190
Wet Film Thickness Measurement
Cat Number Price (pound)
115
Stainless Steel Comb ndash Set 4 in Leather Case
Scale 1 (25-330 microns) Scale 2 (51-457 microns) Scale 3 (51-762 microns) Scale 4 (127-1270 microns)
7850
3230
Wet Film Wheel ndash Available in following Scales 19015
Scales ndash 0-50 microns 18470
0-250 microns 20285
0-500 microns 20285
0-1500 microns 20285
154 Plastic Comb ndash Disposable (Box 500) 50-800 microns 11610
Page 63
COATING THICKNESS GAUGES
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Coating Thickness Gauge
Sonatest Price (pound)
Sonacoat Easy F Digital Coating Thickness gauge range 0 ndash 3500 m Ferrous 49350
Sonacoat III Digital Coating gauge with separate probe 54600
Sonacoat Easy FN Digital Coating Thickness gauge range 0 ndash 3500 m Ferrousnon 63000
Sonacoat III FN High performance Coating gauge 110040
Elcometer
101 Mechanical Coating Thickness Gauge ranges available 0-1 0-5 27625
121 Paint Inspection Gauge (PIG) 4 Ranges available Price from 62985
126 Dial Thickness Gauge Metric or imperial 19500
157 Mechanical Pull-off Gauge (Coating Thickness) 15470
195 Saberg Drill Range 0-1500micron (60milsthou) options available 43650
211 Magnetic Thickness Gauge (Banana) Non-Magnetic on Ferrous 5 ranges available prices from
25970
355 Digital Coating Thickness Measuring System prices from 96500
SE1000FN Sheen Ecotest Plus Coating Thickness Gauge FENon FE 0-2000Чm 65500
600F Minitest 600F (fe) includes Stats and Standard Probe 65300
600N Minitest 600F (nonfe) includes stats and Standard Probe 73500
600FN Minitest 600FN (fe and nonfe) includes stats and Standard Probe 88000
DeFelsko
6000F DFT PosiTector 6000 Basic F 1 ( optional standard or with memory ) 39500
6000F PosiTector 6000 Basic NF 1( optional standard or with memory ) 46500
6000F PosiTector 6000 Basic FNF 1( optional standard or with memory ) 66000
PosiPen A For measurements on surfaces with normal tempera-tures
15500
PosiPen B For measurements on surfaces with extreme tempera-tures (between-100degC and +230degC)
19000
PosiTest DFT Paint Thickness Gauge (Combo) 42000
Full PosiTector range available Details on request
Page 64
COATING TEST EQUIPMENT ndash POROSITY PIN HOLES COATING TEST EQUIPMENT ndash POROSITY PIN HOLES
Porosity Detection - Price(pound)
PD6kV DC Holiday Detector cw Shoulder Bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator and manual incorporating a calibration certificate (Order code PD6)
104000
PD6C 6kV DC Holiday Detector cw shoulder bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator pointed probe 2 x 460mm extension rods electrode shoe screwdriver and 250mm phosphor bronze brush electrode and manual incorporating a calibration certificate all contained in a robust transit case (Order code PD6C)
140000
PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D2)
161000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D2A)
177000
Pipeline Test Kit PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Trailing Earth Lead Test Probe Handle (with HV lead and pressure safety switch) 460mm Extension Rod Electrode Shoe 250mm Phosphor Bronze Brush Electrode (Order code D23)
167000
PHD 2-40Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selector) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D4)
185000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D4A)
205000
Full Range Of Accessories Available Price and Specification On Application
PHD 2-40 PHD 1-20 Pin Hole Holiday Detector
PHD 1-20 PHD 2-40 Pipeline Test Kit
Silicone Rubber Electrodes
Accessories
Phosphor Bronze Electrodes Miscellaneous Electrodes
Page 65
POROSITY DETECTION
Compact Porosity Detection Price (pound)
Model DC15 15kv Industrial Kit POA
Model DC15 15kv Pipeline Kit POA
Model DC30 30kv Industrial Kit POA
Model DC30 30kv Pipeline Kit POA
Model Pulse 20 20kv Industrial Kit POA
Model Pulse 20 20kv Pipeline Kit POA
Model Pulse 40 40kv Industrial Kit POA
Model Pulse 40 40kv Pipeline Kit POA
Model Pulse 60 60kv Industrial Kit POA
Model Pulse 60 60kv Pipeline Kit POA
Industrial Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) 10hr charger Probe handle with neon and 2m lead 60mm Connector for flat brushes 7m Earth lead with clamp Fan Brush 250mm Flat brass wire brush 450mm Probe extension Air-operated earphones Shoulder and Waist Harness Kit Case Operating Instructions with conformance certificate Pipeline Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) Spare clip-on battery pack 10hr Charger Probe handle with neon and 2m lead 7m Earth lead with clamp Fan Brush Coil joiner with 450mm connector Air-operated earphones Shoulder and Waist Harness Kit Case Operating instructions with conformance certificate
DC Inspector
10kv Inspector Kit POA
20kv Inspector Kit POA
Inspector Kit comprises Detector Power Pack (20kv inspector only) 125mm Flat Brass Wire Brush or optional fan brush 7m Earth lead with clamp Kit Case Operating instructions with conformance certificate
Thin Film Pinhole (Wet Sponge)
9 675 and 90 v (Selectable) Thin Film Pinhole Kit POA
675 v (Fixed) Thin Film Pinhole Kit POA
Thin Film Pinhole Kit comprises Detector Telescopic Probe handle with sponge 7m Earth lead and clamp Kit Case Operating instructions with conformance certificate
Crest Meter (For Calibration)
DC Model Includes 7m Earth Lead and Clamp POA
Pulse Model Includes 1m Earth Lead and Clamp POA
Certification of Crest Meter POA
Page 66
CLIMATIC CONDITION MONITORING
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Climatic Condition Monitoring
Cat Number Price (pound)
113 Magnetic Thermometer indicates the surface temperature of steel and other magnetic materials continuously Prices from
6030
114 Dew Point Calculator Celsius (with Fahrenheit conversion)
3820
116A
Whirling Hygrometer Spirit Type Celsius
Range ndash5 degree to 50 degree C various options available
5560
116C Sling Hygrometer Range ndash5 degree to 50 degree C
6710
213 Digital Thermometer Range ndash50 degree to +850 degree C (other ranges available)
13820
319 Dew meter cw Liquid Temperature Probe 46280
Page 67
SURFACE PROFILE
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Surface Preparation
Cat Number Price (pound)
101 Roughness Gauge (Scale 45) 27625
119 Pipe Pit Gauge (Imperial Unit Device) 6500
122 Testex Tape (50Tape Roll Coarse 0-50 microns) For use with 124 Foil Gauge
4500
122 Testex Tape (50 Tape Roll Extra Coarse 37-140 microns) 4500
122 Testex Tape (50 Tape Roll Paint Grade 33-85 microns) 4500
123 Surface Profile Gauge (Metric or Imperial) 19900
124 Foil Gauge for Testex Tape (Metric or Imperial) 25610
125 ISO Surface Profile Comparator (Shot or Grit state which) 9345
127 Keane-Tator Surface Profile Comparator (Shot Grit or Sand) 12710
129 Rubert Surface Comparator (Shot or Grit) 9510
130 Salt Contamination Meter SCM400 KIT 347230
223 Digital Surface Profile Gauge 34255
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 62
COATING TEST EQUIPMENT
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Adhesive Testing
Cat Number Price (pound)
106 Portable Adhesive Tester ndash Various Scale Ranges 55250
107 Cross Hatch Cutter and Adhesive Tape for Cross Hatch Test 13260
108 Elcometer Hydraulic Adhesion Tester Tongs 230 volt UK Plug
138190
108 Elcometer Hydraulic Adhesion Tester Tongs 230 volt Euro Plug
138190
108 Elcometer Hydraulic Adhesion Tester Tongs 110 volt No Plug
138190
Wet Film Thickness Measurement
Cat Number Price (pound)
115
Stainless Steel Comb ndash Set 4 in Leather Case
Scale 1 (25-330 microns) Scale 2 (51-457 microns) Scale 3 (51-762 microns) Scale 4 (127-1270 microns)
7850
3230
Wet Film Wheel ndash Available in following Scales 19015
Scales ndash 0-50 microns 18470
0-250 microns 20285
0-500 microns 20285
0-1500 microns 20285
154 Plastic Comb ndash Disposable (Box 500) 50-800 microns 11610
Page 63
COATING THICKNESS GAUGES
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Coating Thickness Gauge
Sonatest Price (pound)
Sonacoat Easy F Digital Coating Thickness gauge range 0 ndash 3500 m Ferrous 49350
Sonacoat III Digital Coating gauge with separate probe 54600
Sonacoat Easy FN Digital Coating Thickness gauge range 0 ndash 3500 m Ferrousnon 63000
Sonacoat III FN High performance Coating gauge 110040
Elcometer
101 Mechanical Coating Thickness Gauge ranges available 0-1 0-5 27625
121 Paint Inspection Gauge (PIG) 4 Ranges available Price from 62985
126 Dial Thickness Gauge Metric or imperial 19500
157 Mechanical Pull-off Gauge (Coating Thickness) 15470
195 Saberg Drill Range 0-1500micron (60milsthou) options available 43650
211 Magnetic Thickness Gauge (Banana) Non-Magnetic on Ferrous 5 ranges available prices from
25970
355 Digital Coating Thickness Measuring System prices from 96500
SE1000FN Sheen Ecotest Plus Coating Thickness Gauge FENon FE 0-2000Чm 65500
600F Minitest 600F (fe) includes Stats and Standard Probe 65300
600N Minitest 600F (nonfe) includes stats and Standard Probe 73500
600FN Minitest 600FN (fe and nonfe) includes stats and Standard Probe 88000
DeFelsko
6000F DFT PosiTector 6000 Basic F 1 ( optional standard or with memory ) 39500
6000F PosiTector 6000 Basic NF 1( optional standard or with memory ) 46500
6000F PosiTector 6000 Basic FNF 1( optional standard or with memory ) 66000
PosiPen A For measurements on surfaces with normal tempera-tures
15500
PosiPen B For measurements on surfaces with extreme tempera-tures (between-100degC and +230degC)
19000
PosiTest DFT Paint Thickness Gauge (Combo) 42000
Full PosiTector range available Details on request
Page 64
COATING TEST EQUIPMENT ndash POROSITY PIN HOLES COATING TEST EQUIPMENT ndash POROSITY PIN HOLES
Porosity Detection - Price(pound)
PD6kV DC Holiday Detector cw Shoulder Bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator and manual incorporating a calibration certificate (Order code PD6)
104000
PD6C 6kV DC Holiday Detector cw shoulder bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator pointed probe 2 x 460mm extension rods electrode shoe screwdriver and 250mm phosphor bronze brush electrode and manual incorporating a calibration certificate all contained in a robust transit case (Order code PD6C)
140000
PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D2)
161000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D2A)
177000
Pipeline Test Kit PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Trailing Earth Lead Test Probe Handle (with HV lead and pressure safety switch) 460mm Extension Rod Electrode Shoe 250mm Phosphor Bronze Brush Electrode (Order code D23)
167000
PHD 2-40Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selector) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D4)
185000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D4A)
205000
Full Range Of Accessories Available Price and Specification On Application
PHD 2-40 PHD 1-20 Pin Hole Holiday Detector
PHD 1-20 PHD 2-40 Pipeline Test Kit
Silicone Rubber Electrodes
Accessories
Phosphor Bronze Electrodes Miscellaneous Electrodes
Page 65
POROSITY DETECTION
Compact Porosity Detection Price (pound)
Model DC15 15kv Industrial Kit POA
Model DC15 15kv Pipeline Kit POA
Model DC30 30kv Industrial Kit POA
Model DC30 30kv Pipeline Kit POA
Model Pulse 20 20kv Industrial Kit POA
Model Pulse 20 20kv Pipeline Kit POA
Model Pulse 40 40kv Industrial Kit POA
Model Pulse 40 40kv Pipeline Kit POA
Model Pulse 60 60kv Industrial Kit POA
Model Pulse 60 60kv Pipeline Kit POA
Industrial Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) 10hr charger Probe handle with neon and 2m lead 60mm Connector for flat brushes 7m Earth lead with clamp Fan Brush 250mm Flat brass wire brush 450mm Probe extension Air-operated earphones Shoulder and Waist Harness Kit Case Operating Instructions with conformance certificate Pipeline Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) Spare clip-on battery pack 10hr Charger Probe handle with neon and 2m lead 7m Earth lead with clamp Fan Brush Coil joiner with 450mm connector Air-operated earphones Shoulder and Waist Harness Kit Case Operating instructions with conformance certificate
DC Inspector
10kv Inspector Kit POA
20kv Inspector Kit POA
Inspector Kit comprises Detector Power Pack (20kv inspector only) 125mm Flat Brass Wire Brush or optional fan brush 7m Earth lead with clamp Kit Case Operating instructions with conformance certificate
Thin Film Pinhole (Wet Sponge)
9 675 and 90 v (Selectable) Thin Film Pinhole Kit POA
675 v (Fixed) Thin Film Pinhole Kit POA
Thin Film Pinhole Kit comprises Detector Telescopic Probe handle with sponge 7m Earth lead and clamp Kit Case Operating instructions with conformance certificate
Crest Meter (For Calibration)
DC Model Includes 7m Earth Lead and Clamp POA
Pulse Model Includes 1m Earth Lead and Clamp POA
Certification of Crest Meter POA
Page 66
CLIMATIC CONDITION MONITORING
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Climatic Condition Monitoring
Cat Number Price (pound)
113 Magnetic Thermometer indicates the surface temperature of steel and other magnetic materials continuously Prices from
6030
114 Dew Point Calculator Celsius (with Fahrenheit conversion)
3820
116A
Whirling Hygrometer Spirit Type Celsius
Range ndash5 degree to 50 degree C various options available
5560
116C Sling Hygrometer Range ndash5 degree to 50 degree C
6710
213 Digital Thermometer Range ndash50 degree to +850 degree C (other ranges available)
13820
319 Dew meter cw Liquid Temperature Probe 46280
Page 67
SURFACE PROFILE
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Surface Preparation
Cat Number Price (pound)
101 Roughness Gauge (Scale 45) 27625
119 Pipe Pit Gauge (Imperial Unit Device) 6500
122 Testex Tape (50Tape Roll Coarse 0-50 microns) For use with 124 Foil Gauge
4500
122 Testex Tape (50 Tape Roll Extra Coarse 37-140 microns) 4500
122 Testex Tape (50 Tape Roll Paint Grade 33-85 microns) 4500
123 Surface Profile Gauge (Metric or Imperial) 19900
124 Foil Gauge for Testex Tape (Metric or Imperial) 25610
125 ISO Surface Profile Comparator (Shot or Grit state which) 9345
127 Keane-Tator Surface Profile Comparator (Shot Grit or Sand) 12710
129 Rubert Surface Comparator (Shot or Grit) 9510
130 Salt Contamination Meter SCM400 KIT 347230
223 Digital Surface Profile Gauge 34255
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 63
COATING THICKNESS GAUGES
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Coating Thickness Gauge
Sonatest Price (pound)
Sonacoat Easy F Digital Coating Thickness gauge range 0 ndash 3500 m Ferrous 49350
Sonacoat III Digital Coating gauge with separate probe 54600
Sonacoat Easy FN Digital Coating Thickness gauge range 0 ndash 3500 m Ferrousnon 63000
Sonacoat III FN High performance Coating gauge 110040
Elcometer
101 Mechanical Coating Thickness Gauge ranges available 0-1 0-5 27625
121 Paint Inspection Gauge (PIG) 4 Ranges available Price from 62985
126 Dial Thickness Gauge Metric or imperial 19500
157 Mechanical Pull-off Gauge (Coating Thickness) 15470
195 Saberg Drill Range 0-1500micron (60milsthou) options available 43650
211 Magnetic Thickness Gauge (Banana) Non-Magnetic on Ferrous 5 ranges available prices from
25970
355 Digital Coating Thickness Measuring System prices from 96500
SE1000FN Sheen Ecotest Plus Coating Thickness Gauge FENon FE 0-2000Чm 65500
600F Minitest 600F (fe) includes Stats and Standard Probe 65300
600N Minitest 600F (nonfe) includes stats and Standard Probe 73500
600FN Minitest 600FN (fe and nonfe) includes stats and Standard Probe 88000
DeFelsko
6000F DFT PosiTector 6000 Basic F 1 ( optional standard or with memory ) 39500
6000F PosiTector 6000 Basic NF 1( optional standard or with memory ) 46500
6000F PosiTector 6000 Basic FNF 1( optional standard or with memory ) 66000
PosiPen A For measurements on surfaces with normal tempera-tures
15500
PosiPen B For measurements on surfaces with extreme tempera-tures (between-100degC and +230degC)
19000
PosiTest DFT Paint Thickness Gauge (Combo) 42000
Full PosiTector range available Details on request
Page 64
COATING TEST EQUIPMENT ndash POROSITY PIN HOLES COATING TEST EQUIPMENT ndash POROSITY PIN HOLES
Porosity Detection - Price(pound)
PD6kV DC Holiday Detector cw Shoulder Bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator and manual incorporating a calibration certificate (Order code PD6)
104000
PD6C 6kV DC Holiday Detector cw shoulder bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator pointed probe 2 x 460mm extension rods electrode shoe screwdriver and 250mm phosphor bronze brush electrode and manual incorporating a calibration certificate all contained in a robust transit case (Order code PD6C)
140000
PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D2)
161000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D2A)
177000
Pipeline Test Kit PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Trailing Earth Lead Test Probe Handle (with HV lead and pressure safety switch) 460mm Extension Rod Electrode Shoe 250mm Phosphor Bronze Brush Electrode (Order code D23)
167000
PHD 2-40Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selector) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D4)
185000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D4A)
205000
Full Range Of Accessories Available Price and Specification On Application
PHD 2-40 PHD 1-20 Pin Hole Holiday Detector
PHD 1-20 PHD 2-40 Pipeline Test Kit
Silicone Rubber Electrodes
Accessories
Phosphor Bronze Electrodes Miscellaneous Electrodes
Page 65
POROSITY DETECTION
Compact Porosity Detection Price (pound)
Model DC15 15kv Industrial Kit POA
Model DC15 15kv Pipeline Kit POA
Model DC30 30kv Industrial Kit POA
Model DC30 30kv Pipeline Kit POA
Model Pulse 20 20kv Industrial Kit POA
Model Pulse 20 20kv Pipeline Kit POA
Model Pulse 40 40kv Industrial Kit POA
Model Pulse 40 40kv Pipeline Kit POA
Model Pulse 60 60kv Industrial Kit POA
Model Pulse 60 60kv Pipeline Kit POA
Industrial Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) 10hr charger Probe handle with neon and 2m lead 60mm Connector for flat brushes 7m Earth lead with clamp Fan Brush 250mm Flat brass wire brush 450mm Probe extension Air-operated earphones Shoulder and Waist Harness Kit Case Operating Instructions with conformance certificate Pipeline Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) Spare clip-on battery pack 10hr Charger Probe handle with neon and 2m lead 7m Earth lead with clamp Fan Brush Coil joiner with 450mm connector Air-operated earphones Shoulder and Waist Harness Kit Case Operating instructions with conformance certificate
DC Inspector
10kv Inspector Kit POA
20kv Inspector Kit POA
Inspector Kit comprises Detector Power Pack (20kv inspector only) 125mm Flat Brass Wire Brush or optional fan brush 7m Earth lead with clamp Kit Case Operating instructions with conformance certificate
Thin Film Pinhole (Wet Sponge)
9 675 and 90 v (Selectable) Thin Film Pinhole Kit POA
675 v (Fixed) Thin Film Pinhole Kit POA
Thin Film Pinhole Kit comprises Detector Telescopic Probe handle with sponge 7m Earth lead and clamp Kit Case Operating instructions with conformance certificate
Crest Meter (For Calibration)
DC Model Includes 7m Earth Lead and Clamp POA
Pulse Model Includes 1m Earth Lead and Clamp POA
Certification of Crest Meter POA
Page 66
CLIMATIC CONDITION MONITORING
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Climatic Condition Monitoring
Cat Number Price (pound)
113 Magnetic Thermometer indicates the surface temperature of steel and other magnetic materials continuously Prices from
6030
114 Dew Point Calculator Celsius (with Fahrenheit conversion)
3820
116A
Whirling Hygrometer Spirit Type Celsius
Range ndash5 degree to 50 degree C various options available
5560
116C Sling Hygrometer Range ndash5 degree to 50 degree C
6710
213 Digital Thermometer Range ndash50 degree to +850 degree C (other ranges available)
13820
319 Dew meter cw Liquid Temperature Probe 46280
Page 67
SURFACE PROFILE
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Surface Preparation
Cat Number Price (pound)
101 Roughness Gauge (Scale 45) 27625
119 Pipe Pit Gauge (Imperial Unit Device) 6500
122 Testex Tape (50Tape Roll Coarse 0-50 microns) For use with 124 Foil Gauge
4500
122 Testex Tape (50 Tape Roll Extra Coarse 37-140 microns) 4500
122 Testex Tape (50 Tape Roll Paint Grade 33-85 microns) 4500
123 Surface Profile Gauge (Metric or Imperial) 19900
124 Foil Gauge for Testex Tape (Metric or Imperial) 25610
125 ISO Surface Profile Comparator (Shot or Grit state which) 9345
127 Keane-Tator Surface Profile Comparator (Shot Grit or Sand) 12710
129 Rubert Surface Comparator (Shot or Grit) 9510
130 Salt Contamination Meter SCM400 KIT 347230
223 Digital Surface Profile Gauge 34255
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 64
COATING TEST EQUIPMENT ndash POROSITY PIN HOLES COATING TEST EQUIPMENT ndash POROSITY PIN HOLES
Porosity Detection - Price(pound)
PD6kV DC Holiday Detector cw Shoulder Bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator and manual incorporating a calibration certificate (Order code PD6)
104000
PD6C 6kV DC Holiday Detector cw shoulder bag coiled interconnecting lead test probe handle universal power pack (including in-car charger) battery charger with 4 x rechargeable batteries 5m earth lead drum brush electrode test voltage calculator pointed probe 2 x 460mm extension rods electrode shoe screwdriver and 250mm phosphor bronze brush electrode and manual incorporating a calibration certificate all contained in a robust transit case (Order code PD6C)
140000
PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D2)
161000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D2A)
177000
Pipeline Test Kit PHD 1-20Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selection) Mains Charger Lead Trailing Earth Lead Test Probe Handle (with HV lead and pressure safety switch) 460mm Extension Rod Electrode Shoe 250mm Phosphor Bronze Brush Electrode (Order code D23)
167000
PHD 2-40Kv DC Holiday Detector cw Shoulder Bag Battery Built-in Charger (automatic mains selector) Mains Charger Lead Earth Lead Test Probe Handle (with HV lead and pressure safety switch) Steel Drum Brush (Order code D4)
185000
As above with addition of 150mm Conductive Rubber Electrode Pointed Probe 2 x Extension Rods (460mm) long Earthing Magnet Electrode Shoe All contained in a ldquoNew-Stylerdquo robust carrying case (Order code D4A)
205000
Full Range Of Accessories Available Price and Specification On Application
PHD 2-40 PHD 1-20 Pin Hole Holiday Detector
PHD 1-20 PHD 2-40 Pipeline Test Kit
Silicone Rubber Electrodes
Accessories
Phosphor Bronze Electrodes Miscellaneous Electrodes
Page 65
POROSITY DETECTION
Compact Porosity Detection Price (pound)
Model DC15 15kv Industrial Kit POA
Model DC15 15kv Pipeline Kit POA
Model DC30 30kv Industrial Kit POA
Model DC30 30kv Pipeline Kit POA
Model Pulse 20 20kv Industrial Kit POA
Model Pulse 20 20kv Pipeline Kit POA
Model Pulse 40 40kv Industrial Kit POA
Model Pulse 40 40kv Pipeline Kit POA
Model Pulse 60 60kv Industrial Kit POA
Model Pulse 60 60kv Pipeline Kit POA
Industrial Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) 10hr charger Probe handle with neon and 2m lead 60mm Connector for flat brushes 7m Earth lead with clamp Fan Brush 250mm Flat brass wire brush 450mm Probe extension Air-operated earphones Shoulder and Waist Harness Kit Case Operating Instructions with conformance certificate Pipeline Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) Spare clip-on battery pack 10hr Charger Probe handle with neon and 2m lead 7m Earth lead with clamp Fan Brush Coil joiner with 450mm connector Air-operated earphones Shoulder and Waist Harness Kit Case Operating instructions with conformance certificate
DC Inspector
10kv Inspector Kit POA
20kv Inspector Kit POA
Inspector Kit comprises Detector Power Pack (20kv inspector only) 125mm Flat Brass Wire Brush or optional fan brush 7m Earth lead with clamp Kit Case Operating instructions with conformance certificate
Thin Film Pinhole (Wet Sponge)
9 675 and 90 v (Selectable) Thin Film Pinhole Kit POA
675 v (Fixed) Thin Film Pinhole Kit POA
Thin Film Pinhole Kit comprises Detector Telescopic Probe handle with sponge 7m Earth lead and clamp Kit Case Operating instructions with conformance certificate
Crest Meter (For Calibration)
DC Model Includes 7m Earth Lead and Clamp POA
Pulse Model Includes 1m Earth Lead and Clamp POA
Certification of Crest Meter POA
Page 66
CLIMATIC CONDITION MONITORING
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Climatic Condition Monitoring
Cat Number Price (pound)
113 Magnetic Thermometer indicates the surface temperature of steel and other magnetic materials continuously Prices from
6030
114 Dew Point Calculator Celsius (with Fahrenheit conversion)
3820
116A
Whirling Hygrometer Spirit Type Celsius
Range ndash5 degree to 50 degree C various options available
5560
116C Sling Hygrometer Range ndash5 degree to 50 degree C
6710
213 Digital Thermometer Range ndash50 degree to +850 degree C (other ranges available)
13820
319 Dew meter cw Liquid Temperature Probe 46280
Page 67
SURFACE PROFILE
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Surface Preparation
Cat Number Price (pound)
101 Roughness Gauge (Scale 45) 27625
119 Pipe Pit Gauge (Imperial Unit Device) 6500
122 Testex Tape (50Tape Roll Coarse 0-50 microns) For use with 124 Foil Gauge
4500
122 Testex Tape (50 Tape Roll Extra Coarse 37-140 microns) 4500
122 Testex Tape (50 Tape Roll Paint Grade 33-85 microns) 4500
123 Surface Profile Gauge (Metric or Imperial) 19900
124 Foil Gauge for Testex Tape (Metric or Imperial) 25610
125 ISO Surface Profile Comparator (Shot or Grit state which) 9345
127 Keane-Tator Surface Profile Comparator (Shot Grit or Sand) 12710
129 Rubert Surface Comparator (Shot or Grit) 9510
130 Salt Contamination Meter SCM400 KIT 347230
223 Digital Surface Profile Gauge 34255
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 65
POROSITY DETECTION
Compact Porosity Detection Price (pound)
Model DC15 15kv Industrial Kit POA
Model DC15 15kv Pipeline Kit POA
Model DC30 30kv Industrial Kit POA
Model DC30 30kv Pipeline Kit POA
Model Pulse 20 20kv Industrial Kit POA
Model Pulse 20 20kv Pipeline Kit POA
Model Pulse 40 40kv Industrial Kit POA
Model Pulse 40 40kv Pipeline Kit POA
Model Pulse 60 60kv Industrial Kit POA
Model Pulse 60 60kv Pipeline Kit POA
Industrial Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) 10hr charger Probe handle with neon and 2m lead 60mm Connector for flat brushes 7m Earth lead with clamp Fan Brush 250mm Flat brass wire brush 450mm Probe extension Air-operated earphones Shoulder and Waist Harness Kit Case Operating Instructions with conformance certificate Pipeline Kit comprises Detector with clip-on power pack Mini-Crest Meter (DC15 and DC30 only) Spare clip-on battery pack 10hr Charger Probe handle with neon and 2m lead 7m Earth lead with clamp Fan Brush Coil joiner with 450mm connector Air-operated earphones Shoulder and Waist Harness Kit Case Operating instructions with conformance certificate
DC Inspector
10kv Inspector Kit POA
20kv Inspector Kit POA
Inspector Kit comprises Detector Power Pack (20kv inspector only) 125mm Flat Brass Wire Brush or optional fan brush 7m Earth lead with clamp Kit Case Operating instructions with conformance certificate
Thin Film Pinhole (Wet Sponge)
9 675 and 90 v (Selectable) Thin Film Pinhole Kit POA
675 v (Fixed) Thin Film Pinhole Kit POA
Thin Film Pinhole Kit comprises Detector Telescopic Probe handle with sponge 7m Earth lead and clamp Kit Case Operating instructions with conformance certificate
Crest Meter (For Calibration)
DC Model Includes 7m Earth Lead and Clamp POA
Pulse Model Includes 1m Earth Lead and Clamp POA
Certification of Crest Meter POA
Page 66
CLIMATIC CONDITION MONITORING
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Climatic Condition Monitoring
Cat Number Price (pound)
113 Magnetic Thermometer indicates the surface temperature of steel and other magnetic materials continuously Prices from
6030
114 Dew Point Calculator Celsius (with Fahrenheit conversion)
3820
116A
Whirling Hygrometer Spirit Type Celsius
Range ndash5 degree to 50 degree C various options available
5560
116C Sling Hygrometer Range ndash5 degree to 50 degree C
6710
213 Digital Thermometer Range ndash50 degree to +850 degree C (other ranges available)
13820
319 Dew meter cw Liquid Temperature Probe 46280
Page 67
SURFACE PROFILE
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Surface Preparation
Cat Number Price (pound)
101 Roughness Gauge (Scale 45) 27625
119 Pipe Pit Gauge (Imperial Unit Device) 6500
122 Testex Tape (50Tape Roll Coarse 0-50 microns) For use with 124 Foil Gauge
4500
122 Testex Tape (50 Tape Roll Extra Coarse 37-140 microns) 4500
122 Testex Tape (50 Tape Roll Paint Grade 33-85 microns) 4500
123 Surface Profile Gauge (Metric or Imperial) 19900
124 Foil Gauge for Testex Tape (Metric or Imperial) 25610
125 ISO Surface Profile Comparator (Shot or Grit state which) 9345
127 Keane-Tator Surface Profile Comparator (Shot Grit or Sand) 12710
129 Rubert Surface Comparator (Shot or Grit) 9510
130 Salt Contamination Meter SCM400 KIT 347230
223 Digital Surface Profile Gauge 34255
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 66
CLIMATIC CONDITION MONITORING
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Climatic Condition Monitoring
Cat Number Price (pound)
113 Magnetic Thermometer indicates the surface temperature of steel and other magnetic materials continuously Prices from
6030
114 Dew Point Calculator Celsius (with Fahrenheit conversion)
3820
116A
Whirling Hygrometer Spirit Type Celsius
Range ndash5 degree to 50 degree C various options available
5560
116C Sling Hygrometer Range ndash5 degree to 50 degree C
6710
213 Digital Thermometer Range ndash50 degree to +850 degree C (other ranges available)
13820
319 Dew meter cw Liquid Temperature Probe 46280
Page 67
SURFACE PROFILE
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Surface Preparation
Cat Number Price (pound)
101 Roughness Gauge (Scale 45) 27625
119 Pipe Pit Gauge (Imperial Unit Device) 6500
122 Testex Tape (50Tape Roll Coarse 0-50 microns) For use with 124 Foil Gauge
4500
122 Testex Tape (50 Tape Roll Extra Coarse 37-140 microns) 4500
122 Testex Tape (50 Tape Roll Paint Grade 33-85 microns) 4500
123 Surface Profile Gauge (Metric or Imperial) 19900
124 Foil Gauge for Testex Tape (Metric or Imperial) 25610
125 ISO Surface Profile Comparator (Shot or Grit state which) 9345
127 Keane-Tator Surface Profile Comparator (Shot Grit or Sand) 12710
129 Rubert Surface Comparator (Shot or Grit) 9510
130 Salt Contamination Meter SCM400 KIT 347230
223 Digital Surface Profile Gauge 34255
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 67
SURFACE PROFILE
Calibration Certificate Available POA (Note this must ordered at same time as unit)
Surface Preparation
Cat Number Price (pound)
101 Roughness Gauge (Scale 45) 27625
119 Pipe Pit Gauge (Imperial Unit Device) 6500
122 Testex Tape (50Tape Roll Coarse 0-50 microns) For use with 124 Foil Gauge
4500
122 Testex Tape (50 Tape Roll Extra Coarse 37-140 microns) 4500
122 Testex Tape (50 Tape Roll Paint Grade 33-85 microns) 4500
123 Surface Profile Gauge (Metric or Imperial) 19900
124 Foil Gauge for Testex Tape (Metric or Imperial) 25610
125 ISO Surface Profile Comparator (Shot or Grit state which) 9345
127 Keane-Tator Surface Profile Comparator (Shot Grit or Sand) 12710
129 Rubert Surface Comparator (Shot or Grit) 9510
130 Salt Contamination Meter SCM400 KIT 347230
223 Digital Surface Profile Gauge 34255
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 68
METAL ANALYSIS
Further Information Specifications and Datasheets are Available on Request Please Call One of Our Offices To Obtain Copies
Niton XL2 XRF Analyser
Rugged design for real-world industrial environments Easy to use - even by non-technical personnel Truly non-destructive test with near instanta-neous results From turn on to trigger pull to results in just seconds Confident analysis with technology from the industry leader
The XL2 x-ray fluorescence (XRF) analysers are purpose-built for demanding applications When speed accuracy and reliability count the combination of strong hardware smart software and industry experience helps meet your specific analytical requirements The XL2 x-ray tube-based analysers provide you with many distinct advantages
Niton XL3t GOLDD Technology
Light element detection (Mg Al Si P S) without helium or vacuum purging High count rate for lower detection limits and faster analysis True lab-quality performance in a hand-held instrument Analyse metal alloys Carry out mining exploration and mapping Detect soil contaminants Screen electronics and consumer goods for prohibited substances
GOLDD technology stands for Geometrically Optimized Large Drift Detector and it is the cornerstone of the most significant improvement to XRF analysis since the introduction of the Niton XL3t in 2007 yielding up to a 10x performance gain over this award-winning XL3t analyser What is the GOLDD advantage GOLDD technology delivers vast improvements in sensitivity and measurement times ndash as much as 10 times faster than conventional Si-PIN detectors and up to 3 times more precise than conventional SDD detectors (SDD) Niton XL3t Series analysers with GOLDD technology provide you with many distinct advantages
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 69
THERMAL IMAGINE CAMERA amp REPORTING SOFTWARE
VisIRreg Ti 200 is a cost-effective real-time thermal imaging camera with many of the features normally found in more expensive systems The combination of simultaneous visual and infrared images plus voice recording in the VisIR Ti 200 camera dramatically reduces the time taken to collect field data for greater productivity Its lightweight and rugged (cast aluminium) construction gives maximum durability and ergonomic one handed operation
Cost-effective Package
Light weight rugged cast Aluminium construction
Four hour battery life
DayBritetrade 4rdquo LCD touch screen display
Real-time simultaneous Thermal and Visual imaging
Wireless connectivity with VisAIR Wi-Fi long range transmission iRDA and Bluetooth standards
Single hand operation
Voice recording
Condition REDreg is a powerful SQL Server database system that organizes
your assets and workflow for thermography and Predictive Maintenance Camera based asset information and direct data entry in the field lead to fault and work list reports that are produced in seconds Condition RED works on your PC in the shop and in your camera in the field to make sure your Preventive Maintenance program runs smoothly and effectively at all times Condition RED VisIR provides direct integration of camera based thermal inspection and PC data management Asset reference thermal amp visual images and settings are transferred directly from PC to camera for side-by-side field comparison and evaluation of asset status Instant decision making and entry of asset operating parameters for automated reports and repair schedules
These Products Are Subject To UK Export Licence And Are Country Specific Please Contact Us For Further Information
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 70
CRACK DEPTH METERmdashRMG 4015
Crack depth gauge RMG 4015 measures crack depths on workpieces of iron ferrous and austenitic steels and can also be used for cracks in copper brass aluminium and other non-ferrous metalsIt operates due to the potential probe principle A probe with four spring-loaded and gilded contact pins is positioned across the crack to be measured on the workpiece A constant alternating current is passed via two of the pins into the workpiece the two other pins measure the voltage drop across the crack where the crack depth is derived from The ac of the instrument utilizes the skin effect which forces the current flow to the surface of the conductor and therefore follows the contour of the crack The operation and measured value formation are monitored by the microprocessor of the gauge In addition to common cracks running in most cases perpendicularly to the surface the real life often shows oblique cracks where usually it is not the expansion of the cracks which is of interest but the oblique orientation and the projection with reference to the surface If you know these measures it can be decided whether the post-treatment of a workpiece with cracks is technically possibly and economically reasonable Therefore the instrument was equipped with an additional measuring function for the determination of oblique cracks which permits to determine the inclination of the crack with respect to the material surface
ACFM CRACK DEPTH MEASUREMENT
The AMIGO represents a significant advance in ACFM topside inspection technology The new instrument has all the advantages of ACFM inspection but in a smaller lighter package and with the added benefits of a longer battery life and support for simple array probes The system provides Rapid scanning using a hand-held probe Reliable crack detection and sizing (length and depth) Dual frequency option 5kHz (for ferritic and non-ferrous metals) Rugged site unit IP54 rated At least 5 hour operation on one fully-charged battery pack no need to clean to bare metal Capable of inspection through thin or thick coatings Compatible Windows software for ease of operation Full data storage for back-up off-line view and audit purposes Access to a wide range of geometries using active topside probes One man operation in difficult access areas
AMIGO ACFM CRACK MICROGAUGE
FEATURES OF THE ATI SYSTEM The new ATI system comprises a master control unit based around TSCrsquos rugged battery-powered Amigo ACFM instrument This is significantly lighter than the previous system and also supports use of a higher operating frequency for increased sensitivity on non-ferrous components The system is controlled by a standard laptop PC which can be supplied as a rugged version if requiredThe ATI system has been designed to reduce the equirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
ATI ARRAY PROBES
can be used to inspect a variety of pin an box threads and
has been used successfully on NC38 NC 46 NC50 4 frac12 IF
6 58 Reg 7 58 Reg and HT40
connectors Probes for other thread forms or pitches are
also available
The ATI system has been designed to reduce the requirement for skilled operators and to allow drill string thread inspection data to be available for audit Having the ability to detect locate and size defects without the need for operator interpretation
Full technical specifications and data sheets are available on all of the above products
The Model U31 Underwater ACFM Crack Microgauge represents a significant
advance in ACFM subsea inspection technology The new instrument has all
the advantages of ACFM inspection available on other TSC instruments but in
a much smaller lighter package designed specifically for diver deployment
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 71
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 72
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 73
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 74
ULTRASONIC INSPECTION OF HEAT EXCHANGER TUBES
IRIS INSPECTION SYSTEM Brief description of IRIS ultrasonic principle
The IRIS 9000 employs an ultrasonic immersion pulse echo technique The ultrasonic transducer is contained in a test head which fits into and is centred in the heat exchanger tube The ultrasonic pulses are emitted along a path parallel with the tube axis These pulses are then reflected by a rotating 45-degree mirror so that they are directed radically onto the tube wall Reflections from the inner and outer walls follow the same path back to the transducer The time interval between the first echo from the internal surface of the tube and the first echo from the outside surface of the tube can be used to represent the tube wall thickness As the mirror rotates the ultrasonic beam is traversed around the tube circumference and each successive pulse is mapped out as a horizontal scan line on the screen of the IRIS 9000 There are a 192 readings per revolution and 2400 revolutions per minute When the probe is advanced along the tube at the optimum inspection rate of 254 meters (100) per minute the ultrasonic pulses paint a continuous helical path on the tube wall ensuring 100 coverage The results are the most definitive yet to be invented for the inspection of air cooled and liquid cooled tube bundle heat exchangers
Outstanding Features
Self calibrating Extremely accurate (+-05mm) (002) Tube lengths up to 30 metres (99 Feet) All tube sizes from 122mm (048) internal diameter up through 635mm (25) outside diameter
Documents calibration and inspection data on-site Probe advanced by encoder drive motor Menu driven operating system Operates in metric or imperial
measurement Custom designed for this specific
purpose (not pc based) Reliable and repeatable inspections
NOTE COUNTRY DEPENDENT SUPPLY FULL DATA SHEETS AND PRICES AVAILABLE ON REQUEST
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 75
The XC-350 is a compact easy to use x-ray postal screening system that is equally suitable for the post room or main reception area Postal screening systems protect your staff and business from dangerous or very unpleasant packages and mail You no longer have to choose between price and performance You can now have a high specification postal screening system for the price of a basic system
Sarax have been supplying high performance postal screening systems over many years for some of the most demanding applications in both Government and Industry
Features The system runs on an industrial pc with Windows XP operating system Full image processing package included at no additional cost (see specification table below for full details) Image processing algorithms for the detection of powder and wire features All images are saved and automatically time and date stamped Images can easily be transferred to memory stick and emailed Ethernet connection is available for remote viewing or emailing of images (optional) Simple to operate via mouse or single button operation Largest inspection volume of any system in its class The design allows front or side door access Free standing or on-system 17rdquo flat screen monitor Training
Comprehensive on-board training library Training records including name date of test and results stored on system database Safety
All Sarax products meet or exceed the requirements of Ionising Radiation Regulations 1999 (UK) CFR102040 Cabinet X-ray Systems (USA) Servicing and Support Sarax products are designed and manufactured in the UK Routine service visits and maintenance contracts Telephone support and full on-site service cover Various Options Available
Integral radiation monitoring ndash detects radioactive material in post or packages and alerts operator with a flashing warning on the inspection screen Touch screen control Internet connectivity via Ethernet connection
Additional remote monitor
On-board radiation monitoring
SARAX XC-350 POSTAL SCREENING SYSTEM
Sample X-ray Image (Letter Bomb)
Voltage 110220V 5060Hz 2 Amp Interface - Manual Control radic Duty Cycle 100 - Tracker Ball Mouse radic Operational Temperature 0 - 40ordm C - Bluetooth radic Cabinet Footprint - Width 593mm - Keyboard radic - Depth 675mm - Touch screen Optional Cabinet Height 1758mm -Remote Monitor Optional Door Loading - Front radic Image Data Transfer Memory Stick - Side Optional Onboard Image Storage radic X-Ray Generator High Frequency Constant Potential Recall Stored Images radic System Control Industrial PC Pentium Memory 4 GB Save (timedate stamp) all images radic Computer Operating System Microsoft Windows XP Internet Connectivity Optional Screen Options - onboard 17rdquo Automatic Image Flattening radic - freestanding 17rdquo ZoomPanTilt x2 x4 x6 x8 x16 radic On-screen fault monitoring radic Additional lsquoExposure Controlrsquo radic Chamber Size - Width 450mm Pseudo Colour - variable radic - Depth 620mm Inverse Image (Black amp White) radic - Height 600mm DarkenLighten radic Image Area - Width 420mm ContrastStretch radic - Depth 560mm Edge Filter radic 3DEmboss radic Onboard Training radic
Specifications
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 76
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 77
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 78
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 79
Click here to return to contents page v
Endoscopes amp Visual Inspection Cameras
WOHLER VIS 220 Visual Inspection system
WOumlHLER VIS220 Service Camera The battery driven Woumlhler VIS 220 innovative service camera provides inspection capabilities in pipes from 40 mm to 150 mm Oslash The compact system case contains a miniature colour camera head with durable stainless steel housing and waterproof up to 3 bar 30M The camera head is moved with 20 m glass-fibre reinforced plastic rod through pipes and passes 87deg bends easily The metric marking on the push rod makes location simple The tilt-able monitor with 2 m cable provides perfect handling The system provides a video out socket for documentation purposes Advantages miniature colour camera head with 26 mm Oslash and durable stainless steel housing waterproof up to 3 bar 30M tilt-able 55ldquo monitor with 2 m cableflexible glass-fibre reinforced rod with metric marking battery-supplied inspection of up to 15h power status LED video output by RCA socket for documentation
Litetec Video Scope Clear imageryHigh Resolution Display 300000-Pixel colour CMOS Image Sensor Extremely clear vision system 25 dot matrix colour Inbuilt Lighting system (transmitted using an LED light source) This means low energy consumption longevity and high light intensity Adjustable Light Levels Flex n Stay Cable Gooseneck insertion tube 98mm in diameter 1500mm usable length with an insertion-distance scale Watertight abrasion-resistant and non-corrosive Images can be connected to a PC by Video Capture Card Images can be transmitted to a television set Carry case with detachable strap With high quality Ni-batteries the apparatus can be recharged more than 2000 times One battery charge enables 48 hours of use
LITETEC Video Scope
Litetec Flexi Plus Portascope Flexi Plus allows the customer to choose between varying cable lengths and add on optional extras including side view adapter and a CCD Camera with USB Capture Device Portascope Flexi Plus utilises an annular ring light sources to give a brighter more even illumination Kits available in 8mm Diameter 1 metre cable length 8mm Diameter 3 metre cable length 5mm Diameter 1 metre cable length Side view adaptor at 90 deg for 5mm diameter 8mm diameter Mains light source with fibre optic light guide CCD Camera with USB capture Device Litetec Ridged Endoscope 127 diameter x 270mm length 90 deg viewing direction Inc rechargeable battery pack (last up to 3 hours on a single charge) Belt amp holster spare Halogen lamp and carry case For Prices on all Litetec products please call
VIS 220 PRO Price pound424500 specification on request
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
Page 90
OTHER SAFETY AND DETECTION DEVICES
Gas Detection Tubes We sell a full range of Draeger Rae and MSA Colourmetric tubes for the detection of over 500 different gases and vapours Ideal for compliance with COSHH legalisation and emission monitoring
Cable Location Metal detectors and Cable Avoidance Tools with a range of depths available as well as innovative ground radar products
Air Movers amp Ventilation We offer a selection of air-moving equipment suitable for all environments all with various capabilities to ensure you have the right equipment with enough capacity to suit your needs
Gas Detection Portable gas detection for the monitoring of single or multiple gases simultaneously Models can include up to 5 gases at once data logging and integrated pumps for remote sampling
Breathing Apparatus A range of breathing
apparatus for use when
working in or escaping from
hazardous environments
where fire smoke or toxic
gases may be present
Airline Airline trolley systems are ideal for use where extended duration of BA is required Designed to work from a compressor or cylinders and with either 50 or 100 metre hose lengths
Lighting Our range of ATEX approved safety torches hand lamps and cap lamps are suitable for use in all industries and are available as dry cell or re-chargeable units
Tripods Lightweight easy to erect tripods with galvanised tubular aluminium and telescopic legs designed for strong and stable recovery
Chemical Suits Available in a range of materials and styles including combi-splash suits and full encapsulation for internal breathing apparatus by leading manufactures Respirex and Draeger Safety
Fall Arrest A range of robust fall arrest and retrieval devices designed to be reliable in all environments in which controlled entry or fall arrest may be required Working at heights equipment also available
Road Furniture We can supply a range of specialist temporary traffic products made from reflective PVC including roll up road signs and fold up barrier systems
Harnesses A comprehensive stock of harnesses are available for working at heights as well as for confined space entry rescue
