For WISP, you can distribute all of our 24v passive POE switch, to binding UBNT and TPLINK

Wireless AP to sell. This kind 24v passive POE switch is very competitive to ubnt

toughswitch.

For CCTV, I recommend these model different with TPLINK.

1. For smalls ports quantity model:

Tplink just have 4+4,8ports, NC-LINK have 4+1 ports and 8+1 ports. One uplink port suit for

connect NVR.

2. For big ports quantity model:

Tplink has 16+2G,24+2G 8+2G, but all based on web management switch, a little expensive , and

managed function is no used for most of clients.

NC-LINK have released 8+1G,8+2G, 16+2G,24+2G model with unmanaged and managed two

version, unmanaged version is more cheaper ,suit for middle CCTV project requirement.

3. For total Gigabit POE switch model:

Tplink just have 8pors, 16ports,and 24 ports management poe switch, too expensive for some

clients.

NC-LINK released 5,8,16,24ports unmanaged POE switch. Suit for your get more profit and

increase sales quantity for most users.

4. Power rate is every important for POE switch, no one want to see POE switch has not

enough power to offer, especial for HD camera, PTZ camera such as big power consumed

device.

For 4+4 model, tplink take 53W power adapter for 4 poe port, every port is 53/4=13W

FOR 8+2G model, tplink also give 53W power for 8 poe port, every port just 53/8=6.6W

For 8ports giga version,tplink give 124W for 8 POE ports, because gigabit switch itself usually

consume 5-10W power, so just keep every port 114W/8=14W,802.3at is no used.

For 24+2G model, tplink just give 180W for 24 POE port, every port is 180/24= 7.5W,can not used

under full load.

As I know, normal camera need 5-10W(night sight need more power consume up 5W), PTZ

camera need 10-15W, High-Speed PTZ camera usually need up 15W Power.

Also for most of UBNT 11ac standard wireless AP and HD camera, use 802.3af/at 48V POE,

usually need up 15-25W power.

So I think if you use TPLINK POE switch,can not work under full load, because its power rate is

not enough.

For NC-LINK POE switch:

For 4 POE ports model, we use 60W power, every port is 60W/4= 15W, also have 110W Power

option for 802.3at need, every port reach 27.5W

For 8 POE ports model, we use 144W power, every port is 144W/8= 18W, also have 190W Power

option for 802.3at need, every port reach 23.75W

For 16 POE ports model, we use 360W power, every port is 360W/16= 22W

For 24 POE ports model, we use 400W power, every port is 400W/24= 16.6W,we also have 600W

Power for option. every port reach 25W