National Automation Services, Inc. Corporate Resume

www.NASautomation.com

ph 702 • 487 • NASI (6274) | fax 702 • 487 • 5600

Control System IntegrationIntelligent Solutions & Industrial Empowerment

Motor Controls

PLC SCADA

InstrUmentation

Automation

The infrastructure of NAS includes:• Certified Modicon Programmable Logic Controller Instructors• Automation Application Engineers

Services Provided:• SCADA and PLC Programming• Radio Telemetry Studies• Project Management• Engineering and Design• AutoCAD• Field Service & Training• Instrumentation• Custom Panel Fabrication• UL-508 & UL-698 Listed• Emergency Call-Out

Engineering: Programmable Logic Controllers • Allen-Bradley • GE Modicon • Siemens Software:AB RSView • GE Cimplicity • GE iFix (Intellution) Siemens Win CC • Wonderware

Operator Interfaces:Allen-Bradley • GE • Modicon • Siemens

AC, Servo and Stepper Drives:ABB • Allen Bradley • Compumotor • Siemens • Square D

State-of-the-art Panel Shops:• UL-508 & UL-698 Certified • All panels fully tested• AutoCAD Drawings • AutoCAD 2008 • Promise-E Software

NASNational Automation Services, inc.

ph 702 • 487 • NASI (6274) | fax 702 • 487 • 5600

www.NASautomation.com

• Motion Specialists• Allen-Bradley Systems Engineer• Process Sales Engineer

• Automation Managers• Siemens Solution Partner


COrPOrATE rESumE

Currently located in the Southwestern U.S., National Automation Services, Inc. (NAS) is leading the industry as an elite System Integrator, AB Solutions Provider, Siemens Solution Partner, and UL Certified panel facility. By aligning with nationally recognized regulatory bodies, it offers NAS with

significant marketplace credibility, product compliance integrity, and the highest standards for service and products. From custom control panel design and fabrication to system controls and integration, it

is our mission to provide the best solutions to our customers.

Choosing NAS intelligent solutions is an investment in our strengths of design, implementation, and experience. Our solutions provide industrial empowerment, from the plant floor to your everyday

business operations.

• Automation Managers• Siemens Solution Partner

capabilities

PLCs – 25+ years combined experience NAS engineering department has highly qualified Controls Engineers on staff. Our combined experience exceeds 25 years across many platforms and industries. The focus and depth of our PLC programming experience is diverse. The majority of our work is in the following industries: water/wastewater, substation automation, motion control, chemical delivery systems, semiconductor, and pharmaceutical industries.

SCADA – 20+ years combined experienceNAS experience includes, but is not limited to, the following SCADA Software: Iconics, iFix, Lookout, RSView, and Wonderware. Our experience is with both stand alone and networked SCADA Systems. We currently have many sites with remote access and dial out options such as Web Pages, Software Alarm Dialers, and PC Anywhere for timely support. We have also automated reporting and historical data collection functions using off the shelf and proprietary software.

Contract manufacturing & AssemblyOver half of NAS facility capacity is set aside for assembly. NAS can manufacture fully designed electrical control panels (OEM), or aid in the design of a variety of panels ranging from security to HVAC to Explosion Proof (C1D2).

CommunicationsNAS has successfully integrated communication across many mediums such as fiber, wire, and radio communications. We are experienced in many protocols such as Ethernet IP, PFI, Modbus, Modbus TCP, Profibus, DeviceNET, and DH+.

radio Telemetry StudiesWhen a system requires testing for radio communications, we will do a survey to assure paths, elevations, and frequencies for all sites in the network will meet operational standards for proper performance.

Processing PlatformsOur staff has worked with the following operating systems: Dos, Unix, Linux and all Microsoft Windows Platforms.

Programming LanguagesOur staff can program in the following languages: Visual Basic, C/C++, Assembly, Structured Text, Instruction List, Ladder Diagram, Function Block Diagram, Sequential Function Chart (Grafcet) and Flowchart.

TroubleshootingOur Engineering staff has over 20+ years of field experience troubleshooting hardware, software, and communications. We have the staff and tools available for all types of automation field service from the SCADA and PLC systems down to the calibration of field devices.

Project managementNAS Engineers bring a half century of combined experience in control systems project management for both large and small corporations.

CAD DrawingsNAS utilizes AutoCAD 14, AutoCAD through 2009 and Actrix drawing capabilities.

Engineering and DesignOur staff has consulted for the City of Mesa, Chevron, Delta and Pine Land Company, Air Science, Inc. and Sundt Construction. Our Engineers have assisted Brown and Caldwell, ADP Marshall, Black and Veatch, Malcolm Pirnie, Carollo Engineers, and Bechtel. Our assistance included specification writing, specification review, design consultation, and integration assistance.

Panel FabricationNAS panel shops are capable of standard, UL-508, and UL-845 for MCC fabrication. NAS will build to a provided panel design or supply the design as part of the project.

TrainingNAS Engineers can provide training in Modicon and Allen-Bradley, Intellution and RSView, Communications, and Control Design. NAS is able to write custom classes for on-site training.

project highlights

Southwest Airlines NAS supports Las Vegas McCarran International Airport by maintaining the baggage handling systems. These systems are extensive and utilize dozens of PLC Controllers that constantly need attention. Our scan array system will examine and automate the sorting of baggage as it passes on the conveyor system, node 5 tie in for bomb detection in the baggage, installing new controls and monitoring systems for node 8 at McCarren Airport, generating $300,000 in revenue for NAS. The latest award of contract from Southwest Airlines was for the T-Point expansion at the airport for $250,000. NAS was recently asked by top management within Southwest Airlines to support all of Southwest Airlines operations throughout the western U.S., which includes operations in California, Arizona, Utah, Oregon, Washington, New Mexico, and Texas.

Western Mining and Minerals • Las Vegas NevadaNAS supports all of the automation and controls for St. George operations that include emergency and scheduled services of PLC, SCADA, and instrumentation at the plant.

Honeywell Security Division • Alaska Pipeline • Security Panel AssemblyThe scope of this project involved manufacturing four different types of panels that Honeywell has designed for station security in remote locations on the Alaska pipeline. The cabinets are located both indoors and outdoors often in a very harsh climate. Some cabinets are located in rooms with exposure to hazardous materials (explosive in nature). All of these panels are manufactured with a UL508 rating, and some also have a Class 1, Division 2 Certification.

FKI Logistex • Sky Harbor Airport Baggage Handling / Security UpgradeNAS was contracted by FKI Logistex (a company that provides solutions for Airport customers including advanced baggage handling, security and RFID track-and-tracing for airports of all sizes) to provide startup, troubleshooting, and I/O checkout services for baggage handling and explosive detection of the International Section of Terminal 4. The system utilized an Allen-Bradley ControlLogix PLC over both ControlNet and Ethernet networks to deploy a multi-scan bomb detection system that tracked packages through all stages of sorting including each division, merge or transfer to the overflow line through a bar code array.

City of Mesa • Y2K UpgradeOne of NAS major projects was the City of Mesa’s Y2K Upgrade. The project consisted of Modicon PLC’s (using Concept 2.2) and Intellution iFix SCADA, which included the migration of Intellution FIX32 to iFix. NAS team consisted of Frank Brown and Brandon Spiker, each performing the configuration, programming and integration portions on this project. The upgrade included the Water / Wastewater / Gas and the Electric Utilities Divisions.

Yuma Mesa Irrigation • Pump Station and SCADA UpgradeNAS designed and implemented a SCADA and PLC based control system for Yuma Mesa Irrigation District. The PLC controlled the pump station and after bay gate control. Based on the after bay level, the PLC calculated and totalized flow inside of the PLC. The PLC was connected to the Watermaster and Dispatcher’s SCADA PC site approximately 18 miles away via a spread spectrum radio network. The SCADA package was programmed to control the pump station, after bay gate, and produce water usage reports for the Watermaster. The SCADA PC also has remote dialing capabilities on an alarm condition.

project highlights

City of Phoenix • RTU’s for the Cave Creek Water Reclamation PlantBrandon Spiker designed the Remote Terminal Units for this project utilizing Modicon Momentum PLC’s and Grayhill 900 MHz spread spectrum radios to deliver and meter reclaimed water to the golf courses and parks in the area. Fred Mergey and Frank Brown were both engineers assigned to this project and they each handled the PLC programming and integration for tying totalized data back to the City of Phoenix’s DCS system at the Cave Creek Water Reclamation Plant.

Honeywell Engines & Systems • Test Cell Control, Monitoring and ReportingNAS completed this project using Modicon Quantum PLC’s and Wonderware. The project included programming and integration of chiller control, airflow, compressors, and power monitoring for test cell simulation used in testing of aircraft components. Information from the database was totalized monthly and used to compile daily and monthly reports NAS configured for Airflow and Power Usage data logging. The reports and automation gave Honeywell load shedding capabilities, reducing production costs.

San Carlos Irrigation • Radio Telemetry SurveyNAS designed and implemented a spread spectrum radio network for San Carlos Irrigation District. NAS conducted a spread spectrum radio telemetry field study. NAS configured and commissioned five spread spectrum radio based RTU sites. This system has been operating successfully for five years.

City of Cottonwood, Arizona • Wastewater Treatment Plant UpgradeThis was a Design Build project in which NAS was responsible for all instrumentation and control systems engineering, radio communications, PLC and SCADA programming, documentation and O&M manual generation. Cottonwood’s system architecture consists of Modicon Quantum and Momentum PLC’s, Grayhill radios, and iFix SCADA software.

City of Avondale, Arizona • Master SCADA System, Coldwater SpringsNAS was responsible for the programming and implementation of a Wonderware Master SCADA system at Avondale’s Coldwater Springs Booster Station. The system integrates various remote sites using Modicon PLC’s, MDS radios, and Wonderware InTouch Systems.

Town of Gilbert, Arizona • West San Tan Lift StationThis project consisted of panel fabrication, calibration of flow meters and pressure transmitters, startup of analytical equipment, programming of Modicon Momentum PLC in Concept, programming and design of Magelis touchscreens, O&M manuals, and startup and commissioning.

City of Peoria, Arizona • Beardsley Wastewater Treatment Plant Expansion The scope of work for this project consisted of an Intellution SCADA Upgrade, control panel fabrication, various instrumentation configurations, VFD configurations, commissioning and startup, and finally, creating O&M Manuals. During the project, several problems arose that required NAS to redesign both the blower control systems and the SCADA communications network. Communications and control modules were added to the blowers for them to operate per specifications. Existing control panels were modified. Fiber to Ethernet converters were installed. NAS performed the programming and integration associated with the PLC’s and Intellution iFix SCADA System.

The focus and depth of our PLC and SCADA programming experience is diverse. The majority of NAS clients are in the following industries: water/wastewater, substation automation, motion control, delivery systems, semiconductor, and pharmaceutical industries. NAS experience is with both standalone and networked SCADA Systems. NAS currently has many sites with remote access and dial out options such as Web Pages, Software Alarm Dialers, and PC Anywhere for timely support. NAS also has automated reporting and historical data collection functions using off the shelf and proprietary software. NAS 9500 square foot in the Tempe Arizona facility includes a panel shop for fabrication of standard and UL-508 panels (RTU’s). Here are some additional project summaries from the past few years.

DISCRETE PARTS MANUFACTURINGTRW • Semi-automated air bag production line – AB PLC-5/250, RF tags and readers, bar code scanners, operator interface, communications interface

PrOCESS CONTrOLHVAC/CHILLER • Honeywell, Modicon 984, Wonderware SCADA, Modbus and Modbus Plus Communications, ABB VFD’s

WASTEWATEr TrEATmENT • Ak-Chin, Modicon Compact PLC, Magelis Operator Interface• City of Sedona, PLC5, Operator Interface, DF1 (DH+)• City of Glendale, WRF Quantum PLC, Intellution Dynamics Design• City of Cottonwood, Modicon, Intellution, and Motorola Moscad RTUs

MINING • PLC500, Operator Interface• Phelps Dodge, Modicon Quantum, AB SLC 5 and iFix programming and development for new copper harvesting process

WATEr TrEATmENT • City of Avondale, Coldwater Springs Master SCADA, Wonderware• City of Chandler/Intel Injection Well Project, Modicon Compact, Lookout Software• City of Peoria, Intellution iHistorian Configuration and Programming • City of Mesa Well Control, Intellution Dynamics, Modbus, Modbus Plus, Modbus Ethernet Communications• City of Glendale Water Treatment Plant, Intellution, Modicon and Power Monitoring• Yuma Mesa Irrigation, Modicon and Iconics Genesis 32

PHArmACEuTICAL • Watson Pharmaceuticals, Configuration of Fix 32 SCADA redundancy at Phoenix facility• Watson Pharmaceuticals, Fabrication of Pure Water panel with Fix 32 SCADA programming

Industry solutions

industry solutions

ELECTRIC UTILITY• City of Mesa, Intellution Fix Dynamics, RTUs• Sulphur Springs Valley Electric Coop, Fix Dynamics Programming• Electrical District Two, Intellution Fix 32, Joslyn Reclosers

SEmICONDuCTOr• Motorola RO/DI Water System PLC5, Wonderware, Win911, Data Highway Plus Communications, Redundant I/O, DH+• On Semiconductor, Upgrade iFix SCADA for RODI and Wastewater Treatment Systems• MEMC RO/DI Water System Quantum PLC, Wonderware• Pall Micro RO/DI Water System GE90-30 PLC

mOTION CONTrOL• Coca-Cola Bottling, AB PLC-5, 1336 VFD, AB PLC-2, Operator Interface, Palletizer, Bottling Lines

PROJECT MANAGEMENT• H2O WATER, MDS Ethernet Radio, AB CompactLogix and RS View SCADA integrations for 5 water plants• QUEEN CREEK, MDS Ethernet Radio, RTU and SCADA integrations • CHEVRON, Supervised and consulted on project using Modicon, Iconics Genesis 32, and Matrikon Software• AIR SCIENCE ENGINEERING, Supervised and developed an OEM product using Allen Bradley Products

TRAINING• SUMMIT ELECTRIC SUPPLY, Modicon Programming and Networking• CITY OF GLENDALE, Modicon and Intellution Programming• PALO VERDE NUCLEAR POWER PLANT, Modicon, Ethernet, and Intellution Training on PMUX System• PHELPS DODGE, Modicon and Intellution Training

Customized approach

NAS uses the following engineering approach:

Initial Planning•Define goals and objectives -Optimize System -Bring new sites on-line

•Create the team -NAS Staff -Customer’s Staff -Others

Current State Analysis•Evaluate existing system -Review critical function of existing system -Identify existing system inadequacies -Review system design and configuration -Evaluate Hardware -Evaluate Software -Evaluate Communications

•Evaluate resources -Customer Staff -NAS Staff -Contractors -Time

Goals and Objectives•Envision system design -Prepare report with recommendations for system optimization. The report includes alternative schemes and includes estimated implementation costs -Meet with staff to prioritize and implement the installation -Prepare a report with recommendations for system optimization

•Write functional specification -Develop a system and maintenance protocol

•Develop operational sequence

Implementation Planning•Allocate resources -Develop a plan of action -Develop standards for configuration -Develop a Performance Specification -Prepare installation plan -Develop standard for labeling tags

Project Approach •Equipment -Develop a Bill of Materials for Procurement•Team -Submit and review recommendation report -Assist staff in the implementation of adopted schemes -Meet with staff to prioritize and implement the installation •Define milestones -Based on Customer’s requirements -Projects naturally defined phases•Schedule -Design phase -System development -Work in progress evaluations -Progress meetings Customer Staff

Evaluate Progress•Milestones -Evaluate work completed -Evaluate steps 1 through 4 -Make mid-course corrections•Completion of Project -Review project and critique project with NAS and Customer -Take action on reviewed items if necessary

Your support teams

Summary:Principal/Engineering Manager with 25 years of experience in Engineering, Engineering Management and Project Management of Automation Technology (PLC’s, SCADA and RTU Systems). Up to $3M in projects per year.

Education:-P.E. Professional Engineer for the state of California, February 1995-M.S.E.E. – Los Andes University, Colombia January 1988-B.S.E.E. – Los Andes University, Colombia December 1986. -Bilingual English/Spanish

Years Experience:25+

relevant Project Experience: • Culver City Waste Water | Culver City, CaliforniaWaste water lift station, SCADA System control system, electrical and instrumentation, responsibilities included:- Designed and Fabricated Control Panels- Installation and programming of Motorola Moscad PLC’s and Wonderware HMI’s- Commissioning and start-up support of the systems

• Layne Christensen Water Treatment Division | Fontana, CaliforniaWaste water treatment plant, electrical and instrumentation upgrades, responsibilities included: Southern California Water – Roseton Well 2- Configuration, programming of EZ-Touch HMI.- Configuration, programming of Modicon .- Commissioning and start-up support of the systems.

Buckeye Arizona - Configuration, programming of SLC 5/05 equipment.- Configuration, programming of Panel View HMI.- Commissioning and start-up support of the systems.

Belhaven Plant - Los Angeles- Electrical Schematics PE STAMP

• California Water Services | Southern CaliforniaWater distribution supervisory control and data acquisition (SCADA) system provided monitoring and control for 10 wells and 7 basins, responsibilities included:- Configuration, programming and established communications for 17 Control Microsystems, Telesafe RTU’s.- Configuration and programming of Wonderware’s Intouch MMI software. - Configuration and programming of Microsoft Access Database using SQL to provide production data to Information Systems for accounting and maintenance.- Set up a remote access system that allowed to operations to access the system via phone line and a note book PC, from any location.- Providing ongoing support and training.

CARLOS H CARRILLO, P.E. - SYSTEM ENGINEER/PROJECT MANAGER

Your support teams

Education/Training Summary:-Associate of Applied Science Degree in Electronics Engineering Technology, ITT Technical Institute, San Bernardino, CA 1990.-Certification in Industrial Radiography, American Society of Non-destructive Testing, Don Bosco Technical Institute, Rosemead, CA 1986.-Bilingual English/Spanish


relevant Project Experience:

• Culver City Waste Water | Culver City, California Waste water lift station, SCADA System control system, electrical and instrumentation, responsibilities included:-Designed and Fabricated Control Panels-Installation and programming of Motorola Moscad PLC’s and Wonderware HMI’s-Commissioning and start-up support of the systems.

• Layne Christensen Water Treatment Division | Fontana, CaliforniaWaste water treatment plant, electrical and instrumentation upgrades, responsibilities included: Southern California Water – Roseton Well 2-Configuration, programming of EZ-Touch HMI.-Configuration, programming of Modicon .-Commissioning and start-up support of the systems.

Buckeye Arizona -Configuration, programming of SLC 5/05 equipment.-Configuration, programming of Panel View HMI.-Commissioning and start-up support of the systems.

Belhaven Plant - Los Angeles-Electrical Schematics PE STAMP

• California Water Services | Southern, CaliforniaWater distribution supervisory control and data acquisition (SCADA) system provided monitoring and control for 10 wells and 7 basins, responsibilities included:-Configuration, programming and established communications for 17 Control Microsystems, Teleasafe RTU’s.-Configuration and programming of Wonderware’s Intouch MMI software. -Configuration and programming of Microsoft Access Database using SQL to provide production data to Information Systems for accounting and maintenance.-Set up a remote access system that allowed to operations to access the system via phone line and a note book PC, from any location.-Providing ongoing support and training.

OCTAVIO M. CAPILLA, INSTRUMENT TECHNICIAN

Your support teams

Summary:Brandon has over sixteen years experience as a Controls Engineer. Brandon was a Motion Specialist with Danfoss, a Senior Controls Engineer with ISSI, and an Application Engineer with IEC and Summit Electric Supply. Brandon is a Certified modicon Instructor and an Intellution Trained Integrator. He has excellent program and debug skills in Modicon, Intellution and Communications. Brandon is proficient at database design, network design, and programming. He is also knowledgeable on variable frequency drives (VFD’s), motion control, and field devices. Brandon is experienced in DI/RO water systems, water/wastewater systems, material handling systems, automated assembly systems, bar coding, and remote terminal units (RTUs).

Education:BSEE-Colorado School of Mines Golden, CO-1991


relevant Project Experience: Brandon oversees and is responsible for all operational procedures for National Automation Services Inc. Along with his corporate responsibilities; Brandon also has contributed to the following projects:

• Yuma Mesa Irrigation | Pump Station and SCADA UpgradeBrandon designed and implemented a SCADA and PLC based control system for Yuma Mesa Irrigation District. The PLC controlled the pump station and after bay gate control. Based on the after bay level, the PLC calculated and totalized flow inside of the PLC. The PLC was connected to the Watermaster and Dispatcher’s SCADA PC site approximately 18 miles away via a spread spectrum radio network. The SCADA package was programmed (by Brandon) to control the pump station, after bay gate, and produce water usage reports for the Watermaster. The SCADA PC also has remote dialing capabilities on an alarm condition. • San Carlos Irrigation | Radio Telemetry SurveyBrandon designed and implemented a spread spectrum radio network for San Carlos Irrigation District. Brandon conducted the spread spectrum radio telemetry field study. Intecon, under Brandon’s supervision, configured and commissioned five spread spectrum radio based RTU sites.

• Alaska Marine Highway System | Tustumena Ferry Controls and Elevator upgradeBrandon was responsible for creating the bid packet for this project which included redesigning the elevator and gate controls of a ferry for automated loading procedures using Allen Bradley ControlLogix and ABB Vector Drives. Intecon also performed the fabrication and commissioning services.

• City of Phoenix | RTU’s for the Cave Creek Water Reclamation PlantBrandon designed the Remote Terminal Units for this project utilizing Modicon Momentum PLC’s and Grayhill 900 MHz spread spectrum radios to deliver and meter reclaimed water to the golf courses and parks in the area. Brandon also supervised the PLC programming and integration for tying totalized data back to the City of Phoenix’s DCS system at the Cave Creek WRF.

• City of Mesa | Y2K UpgradeThis project consisted of upgrading Modicon PLC’s (using Concept 2.2) and Intellution iFix SCADA, which included the migration of Intellution FIX32 to iFix. Brandon Spiker was one of the project engineers responsible for performing the configuration, programming and integration portions on this project. The upgrade included the Water / Wastewater / Gas and the Electric Utilities Divisions.

BRANDON SPIKER – PRINCIPAL ENGINEER/DIRECTOR OF OPErATIONS

Your support teams

Summary:Tom is a PLC programmer and controls engineer skilled in design, installation, troubleshooting, and integration of automated systems, special machines, production test equipment, and assembly equipment. Tom has extensive electromechanical, electronic, hydraulic and pneumatic control, and circuit design control experience. Tom handles many of Intecon’s testing, installation, calibration of instruments, startup, and field service functions.

Education:-Schoolcraft Community College, Lavonia Michigan Electrical Engineering Coursework-PLC Training Courses completed for Allen Bradley, GE and Modicon



• City of Apache Junction, Arizona | Well Sites 5, 6, 8, and 16th Avenue Tank Site Tom’s roles on this project consisted of design, programming, FAT testing, installation and startup. The sites utilize AB Micrologix 1100 PLC’s, Phoenix Contact One-Way Radio Systems, MDS iNet Ethernet Radio Systems, and Panelview Plus 1500 Operator Interfaces.

• Town of Prescott, Arizona | Quailwood Meadows Lift StationTom made changes in the field to the PLC code per the customer’s specifications. The site is equipped with an AB SLC 500 PLC. • City of Mesa, Arizona | Hermosa Vista Sewage Lift StationTom installed and calibrated ABB magnetic flow meters, Milltronics Hydroranger level indicating transmitters and other miscellaneous instruments, performed FAT testing for control panels and MCC, assisted with startup, and installed Allen Bradley soft starts for operation of the lift station.

• Kalil Bottling | Tucson Arizona | Packaging Machine IntegrationTom performed programming on an AB ControlLogix PLC for arrangement of single six packs of cans to cases on corrugated boxes through the shrink-wrap machine and, finally, onto pallets.

• Phelps Dodge Mine | Morenci, Arizona | Integration of Additional Conveyor Controls Tom was in charge of programming and startup of a new conveyor system using a AB SLC 500.

• Town of Gilbert, Arizona | Fire Station No. 7 Well Site and ReservoirIntecon was in charge of all instrumentation and control systems on this project including fabrication and testing of the RTU panel, PLC (Siemens S7) programming, SCADA (Wonderware InTouch) programming, startup and training. Tom’s roles included installation and startup of the sites flowmeters and pressure transmitters and startup assistance with communication devices for SCADA.

TOM SHORTLAND, SENIOR CONTROLS ENGINEER

Your support teams

Summary:Trent has both military and civilian experience involving project management, maintenance, repair, instrumentation field calibration, loop verification, and he is experienced with many types of PLCs, SCADA and radio systems.

Training:BEE (Basic Electricity)Allen BradleyRSLinxRSLogix 500RSLogix 5000US Navy Advance MathematicsElectro-Mechanical DevicesAdvanced MetrologyFanuc RoboticsSoftwright’s Terrain Analysis Software Wonderware InTouch



• Queen Creek Water Company | Queen Creek, Arizona RTU design, CAD, PLC and SCADA programming, and installation for seven booster pump stations and five well sites. Work includes startup of each site and general maintenance. Intecon is the first local company to be successful using tag-based logic with this line of Phoenix Contact/OMNEX radios.

• Alaska Marine Highway System | State of Alaska TransportationRepair and retrofit motor and VFD equipment for automated loading of Tustumena Ferry involving both elevator and gate controls.

• Johnson Utilities | Pinal County, ArizonaRTU design, CAD, PLC and SCADA programming, and installation for nine booster pump stations and nine well sites. Work includes startup of each site and general maintenance. Implemented one of the first high speed 2.4 GHz wireless meshing radio networks (Esteem) for water production in the valley. The network currently has thirteen sites.

• H2O Water Company |Queen Creek, ArizonaRTU design, CAD, PLC (AB Micrologix) and SCADA (AB RSView32) programming, and installation for two booster pump stations and one well sites. Work includes startup of each site and general maintenance. Integration of VFD’s to one existing booster pump station.

• City of Tempe radio System Terrain Analysis and Field Study | City of Tempe, ArizonaTrent conducted an extensive Terrain Analysis Radio study and performed field link testing for twenty five sites back to three master radio locations using GE Transnet 900 spread spectrum radios for the city’s new radio system currently in design at Brown and Caldwell.

• Westcor Radio Survey | Arizona American Water | Sun City, ArizonaTrent field tested four links via GE Transnet spread spectrum radio. The 900 MHz data was then integrated into a licensed frequency GE 9710 radio network. Terrain analysis was also performed.

• Basha Well Sites Radio System | City of Chandler, ArizonaTerrain analysis performed for four new well sites to two sites at the City of Chandler WRF master location. The study includes 900 MHz field testing and software terrain analysis with GE Transnet 900 spread spectrum radios.

TRENT GILLESPIE, SENIOR CONTROLS ENGINEER

Your support teams

Summary:Toni has both militaryand civilian experience involving project management, maintenance, repair, precision calibration, and operational testing of: computer controlled electronic and pneumatic systems, AC/DC power supplies (switching and linear, up to 65kv), process analyzers, AC/DC drives and servo-motor systems. Education:-Graduated first out of 18 in specialized electrical school, US Navy 1994-Graduated first out of 15 in basic and advanced electrical school, US Navy 1991-Wire repair and connector school, US Navy 1992, 1996-High Voltage Certified



• City of Mesa, Arizona | Hermosa Vista Sewage Lift StationField service and electrical troubleshooting for MCC, RTU and instrumentation equipment for startup of lift station

• City of Scottsdale, Arizona | DC Ranch Sewage Lift StationFabrication of two RTU panels, pump and odor control panel LCPs, assisted in testing, documentation preparation and procurement of materials

• Honeywell Building Solutions | Sky Harbor Airport Security UpgradesFabrication of UL508 security panels, including testing

Relevant Work Experience:

Toni oversees all contact with Underwriters Laboratories and maintains all UL508 documentation and logs.

Toni is experienced in preventative and corrective electrical maintenance for equipment such as: •Three phase and single phase AC/DC power equipment •High Voltage Power Supplies •Power and lighting circuits, switches, and fuse boxes •Ammeters, voltmeters, ohmmeters, oscilloscopes, pulse generators and other test equipment •Soldering Equipment for: surface mount, through hole, and connector type •Motors, generators, controller, and related power generation equipment •Alarm systems and other power monitoring equipment

Responsible for test equipment set-up, ensures established test procedures are updated and generates new SOP’s

Skilled in interpreting drawings and schematics

Dedicated to Quality Assurance

Developed training program for Intecon’s panel shop

Manages day to day activities of Intecon’s UL508 panel shop employees

Experienced with various types of PLCs

TONI MCGUINNESS, SHOP MANAGER

Your support teams

Summary:As one of our leading Sales Engineers, James provides extensive knowledge in: -Design, implementation and support of automation and control systems-Lean, Six Sigma 5S and other relevant quality methodologies-Blue print/schematic reading and creation-PLC Installs/programming-Computer Interface of Manufacturing Equipment, HVAC Systems, Remote Monitoring and Control Networks, Surveillance Cameras

Education:-North Central Technical College - Wausau, Wisconsin -Electrical Contractor Training- two year apprentice-Johnson Controls -sub contractor training-Continuing education for Microsoft Certified Technology Specialist (MCTS): SQL Server 2005 certification 70-431 TS



• Alcoa Fastening Systems formerly Huck International | Tucson, ArizonaAs the Maintenance Technician, James maintained, upgraded, and Improve many mechanical, electrical, pneumatic, and Hydraulic components on machines and systems pertaining to production and facilities. He also developed, applied, and maintained the maintenance intranet site. James was responsible for the troubleshoot, repair and programming of PLC’s – Allen Bradley all models, Labview, Direct Logic, Direct Soft, Control Technology Corporation, Think n Do, and Entivity. He was also designed, installed, programmed new control system for assembly machine rebuilds. Designed/Networked/Programmed/Installed SCADA (Supervisory Control and Data Acquisition) system on production machines and processes (The James Network). Designed built frame, control system and programming integrating existing feed system with new solid state annealing machines. Designed built innovative weight scale feed system for bagging parts for customers (James Bagger). Reprogrammed dual hoist plating line doubling capacity. Created and coordinate a system for documenting and controlling all system program changes and upgrades. Created standardized controls and programming presently used on thirty plus different types of manufacturing machines. Responsible for the Bill of Materials creation, design concept, schematic/wiring diagram, control cabinet layout, ordering of material, project management, Control and HMI programming for plants wastewater treatment facility. Part of team to be first in Alcoa Fastening Systems to be a Certified Flow Path. • Wison Electric | Tucson, ArizonaAs the Forman, Journeyman Electrician James supervised and trained up to 15 individuals for commercial electrical applications. Facilitate weekly safety meetings, prepare required progress reports, scheduling and maintain customer relations. Repair electrical system apparatus and electronic components using test equipment. Worked in all aspects of the commercial electrical trade.

• Johnson Controls | Tucson, ArizonaComputer and video surveillance installation and set-up at border stations. Controls and monitoring network of water wells at Fort Hauchuca. Fire alarm systems and HVAC controls.

JAMES H. JESSE, CONTROLS ENGINEER

Your support teams

Summary:Manuel has over fourteen years experience as a Controls Engineer. He has excellent program and debug skills in Allen-Bradley, RSView, and Communications. Manuel is proficient at database design, network design, and programming. He is also knowledgeable on variable frequency drives (VFD’s), motion control, and field devices. Manuel is experienced in water/wastewater systems, material handling systems, automated assembly systems, and bar coding.

Training:-Rosemount Pressure Transmitter Maintenance -Rosemount Temperature Transmitter Maintenance -Micro-Motion Flow Transmitter Maintenance -Allen-Bradley 1336 VFD Maintenance -Allen-Bradley PLC5 Maintenance and Troubleshooting -Allen-Bradley Intro to PLC Programming -Allen-Bradley Advanced PLC



• City of Las Vegas Waste Water Facility | PLC and SCADA UpgradeManuel implemented a SCADA and PLC based control system for the City of Las Vegas. The PLC system consisted of over 40 Modicon PLCs which controlled every aspect of the waste water treatment facility and interfaced with the new SCADA system.

• Southern Nevada Water Authority | Bermuda Reservoir Manuel implemented an Allen-Bradley PLC control system to regulate reservoir levels and send information over a radio network to the SNWA main SCADA and a remote pumping station.

• Las Vegas Valley Water District | PLC and SCADA UpgradeManuel was responsible for verifying existing Allen-Bradley PLC code and modifying as necessary to comply with the LVVWD specifications. Manuel also modified existing RSView32 SCADA system to comply with LVVWD specifications.

• Medco Health Systems | Henderson Automated PharmacyManuel was responsible for improving and maintaining an automated pharmacy. Duties included writing and debugging Allen Bradley PLC code on over 40 PLC5 and SLC500 PLCs utilizing RsLogix5, RsLogix500, and Wonderware software, programming Adept robotic arms, maintaining and debugging Visual Basic and C/C++ code, replacing 3 phase motors, troubleshooting pneumatic equipment, and other maintenance functions. Also responsible for the supervision of 23 employees and various project management functions

• Ocean Spray Cranberries | Henderson FacilityManuel was responsible for the installation, maintenance, and calibration of equipment valued in excess of one million dollars including Allen-Bradley PLC5 family programmable logic controllers, Allen-Bradley SLC500 programmable controllers, Rosemount pressure and temperature transmitters, Micro Motion flow meters, Foxboro flow meters, various I/P transducers, pneumatic valves, H&K Can Filler, Angelus Can Seamer, Videojet Package Coder, Peco Vacuum and Fill Level Detector, APV Pasteurization system, and a Combibloc CF706A Aseptic packaging filler. Also, responsible for installation and removal of electric and air operated motors and pumps, writing and debugging Allen-Bradley PLC code utilizing A-B 6200, Winlogic 5, Intellution Fix, RSVIEW software, and training new employees.

MANUEL RUIz, ENGINEERING MANAGER/CONTROLS ENGINEER

Your support teams

Summary:-Over 24 years of supervisory experience in an industrial environment.

-Over 27 years experience troubleshooting, modifying, and improving machinery and systems. Proficiency includes mechanical, electrical, and control system design and implementation.

-Commissioning experience includes 3 gold mines, 1 bottling plant, several water/waste water systems, the world’s largest automated pharmacy, and several conveyor and processing systems.

Training:Skilled in designing, machining, and fabricating parts for machine modifications,designing and interpreting blue prints, P&IDs, and electrical schematics.



• Intuitive System Solutions | Henderson, Nevada Jody Manages the day to day operations of the company, manage projects as required, engineer electrical control panels which includes drawings and submittals, design of electrical circuits, and building control panels and control system networks. Design of machinery which includes: flying wenches, ozone generation equipment, and etc. • Medco Health Solutions | Las Vegas, Nevada As Project Manager; initiate, plan, organize and managed projects as required to improve systems and subsystems in a 250,000 square foot production facility. As Facility Maintenance Manager, maintain and improve all facility systems and subsystems, manage all facility maintenance. • Successfully managed facility maintenance in a 250,000 square foot facility with over 1,600 employees. • Implemented a smart duct detection system which reduced false fire alarms from 12/year to a 0/year savings of $360,000 in down time. • Initiated and managed several projects including a $1.5 Million conveyor conversion and a $700,000 dehumidification project. Both projects came in under budget and on time. • Successfully managed over 17 different projects simultaneously. • Designed a prototype Jewel Case Protector to reduce stray pills which increased work efficiency and reduced down time. 4,000 units were produced and the new units were rolled out company wide.

• EMT and Facility Maintenance Supervisor| Las Vegas, Nevada Supervise production and facility maintenance. Implement and track a computerized maintenance management system (Maximo) improving documentation and overall efficiency. • Designed and built prototype decapping machine to reduce repetitive stress injuries. Received the NDP Process Improvement Award. • Modified the Resina capper chuck design which eliminated the need for a $150,000 Servo motor revision. • Isolated problems associated with a faulty drive design involvement with redesign and installation. Reduced machine failure rate from 30 days to 2 years. Received the Eagle Award for Excellence due to those efforts.

JODY HANLEY, DIRECTOR/PROJECT MANAGER

Your support teams

Summary:Terry is highly skilled and trained as an Industrial Electrician. He is a Certified Welder and Fabricator for machine repair and trained in PLC operations and controls. Terry is also trained and up-to-date on NEC code.

Education:-Indiana University, Associate’s Degree in Mechanical Engineering-Allen Bradley: Micro-Processors School-Ivy Technical School: Programming Logic Controllers-Cincinnati Milacron: Injection Molding Machines Course-Trumpf-TLF6000 Laser Training Course



• Intuitive System Solutions |Henderson, NevadaAs the Construction/Project Supervisor, Terry’s responsibilities included the management of all projects. From production to installation to inspections, Terry oversaw entire projects start to finish. In addition, he was the point of contact for all project inquires. Terry was responsible for building rapport with clients, contractors and their representatives by scheduling meetings to discuss all the unique aspects of each individual project.

• Harlan Machinery Company |Boulder City, NevadaAs the Installation Technician and Electrician at Harlan Machinery, OEM manufacturer of Laminating Machinery, Terry was responsible for the layout of electrical control panels and wiring of machines, including sensors, limit switches and photoelectric cells. He also was responsible for testing and operating machines before shipping, travelling to each site to re-assemble, install and test new machines in their final location. • Mast Technology | Boulder City, NevadaAs the Machine Rebuilder for a manufacturer of specialty ammunition, Terry supervised the Rebuild Department in addition to being responsible for plant maintenance.

• Georgia Pacific Corporation | Apex, NevadaAs the Electrical/Mechanical Technician, Terry worked rotating shifts maintaining machinery and equipment to keep production running two plants smoothly. Terry was responsible for the maintenance of everything from power tools, mills, mixers to the equipment used in the production of drywall.

• Eldorado Cartridge Corporation | Boulder City, NevadaAs the Maintenance Electrician of an ammunition distributor, Terry was responsible for the maintenance of equipment.

• Draggoo Electric | Elkhart, IndianaAs the Service Manager of a residential and commercial service company, Terry was responsible for scheduling the service crew and specialized in handling the logistics of moving the locations of industrial plant facilities.

TERRY HALL, CONSTRUCTION SUPERINTENDENT

Your support teams

Education/Training Summary:-Ohlone College Fremont, CA-Factory trained at the following motor control manufactures: Rockwell Automation Allen-Bradley Siemens Energy and Automation Eaton Cutler-Hammer Moeller Electric Corp. (Klockner-Moeller)



• Intuitive System Solutions | Henderson, Nevada SENIOR ESTIMATOR:Major Responsibilities: Estimate the price of materials and labor needed to obtain a project as an ICSI (Instrumentation & Control Systems Integrator). Prepare, submit, and coordinate material submittals needed for various projects. Manage procurement of the above mentioned materials strictly following the project specifications. Cultivate relationships with the various customers and prospects, usually electrical contractors or utility personnel, so as to be included in their bid package. Maintain a customer and vendor database complete with pricing levels. Work closely with engineering to provide the most cost effective, performance driven products. Document and update a rolling project status file. • PowerPlus! | Las Vegas, Nevada EEI/COMMERCIAL ESTIMATOR:Major Responsibilities: Estimate the price of materials and labor needed to obtain a project as an electrical subcontractor. Prepare, submit, and coordinate material submittals needed for various projects. Obtain work permits and approvals to carry out those projects. Manage procurement of the above mentioned materials.

• Moeller Electric Corp. (Formerly Klockner-Moeller Corp.) | Concord, CA 94520SALES ENGINEER/AREA DISTRIBUTION SALES MANAGER:Major Responsibilities: Promote product sales through distribution. Establish new distributors as well as servicing existing distributors. Maintain competitive pricing levels throughout the territory. Follow-up and classify marketing leads from a variety of sources. Increase area sales on an annual basis.

• JCH Enterprises| Las Vegas, Nevada SALES ENGINEER:Major Responsibilities: Establish new customers as well as servicing existing customers. Main concentration is the OEM and Industrial (MRO) market, with emphasis on the identifying and developing the motor control/automation portion of the marketplace. Increase inventory levels that are acceptable to the sales department and the accounting department. Develop training guidelines and procedures for the inside sales staff working the electrical/motor control market. Establish a VFD commissioning department to further develop customer satisfaction and service.

SCOTT D. CrAmEr, SENIOr ESTImATOr


Headquarters: 702.487.NASI (6274) | Fax: 702.487.5600Email: [email protected]

Web: www.NASautomation.com

Corporate Resume - Summary

FACILITIES AND OPErATIONS

2470 Saint Rose Pkwy Ste 314Henderson, NV 89074

ExPERIENCE HIGHLIGHTS

CAPABILITIES

n PLCsn SCADAn Contract Manufacturing & Assemblyn Communicationsn Radio Telemetry Studiesn Processing Platformsn Training

n Programming Languagesn Troubleshootingn Project Management n CAD Drawingsn Engineering and Designn Panel Fabrication

n Southwest Airlines - Controls and Monitoring Systems - Support all of Southwest Airlines operations throughout the western U.S., which includes operations in the Western United Statesn Honeywell Security Division-Alaska Pipeline- Security Panel Assemblyn City of Mesa - Y2K Upgrade for Water, Wastewater, and Utilitiesn Yuma Mesa Irrigation - Pump Station and SCADA Upgraden City of Phoenix - RTU’s for the Cave Creek Water Reclamation Plantn Southern Cal Edision (AES) - Boiler Operation Startup & Integrationn Honeywell Engines & Systems - Test Cell Control, Monitoring and Reportingn San Carlos Irrigation - Radio Telemetry Survey

n Facilities located in Arizona, Nevada, and California with additional locations nationwide by 2010.n State-of-the-art facilities include local panel shops for fabrication of standard, UL-508, and UL-698 panels (RTU’s).

INDUSTRY VALUE-ADDED SOLUTIONS:

n Discrete Parts Manufacturing -Semi-automated air bag production linen Process Control - HVAC/CHILLERn Wastewater Treatment - Ak-Chin, Modicon Compact PLC, Magelis Operator Interfacen Mining - PLC500, Operator Interfacen Water Treatment - City of Avondale, Coldwater Springs Master SCADA, Wonderwaren Pharmaceutical - Watson Pharmaceuticals, Configuration of Fix 32 SCADA redundancy at Phoenix facilityn Electric Utility - City of Mesa, Intellution Fix Dynamics, RTUsn Semiconductor - On Semiconductor, Upgrade iFix SCADA for RODI and Wastewater Treatment Systems n Motion Control - Coca-Cola Bottling, AB PLC-5, 1336 VFD, AB PLC-2, Operator Interface, Palletizer, Bottling Linesn Project Management - CHEVRON, Supervised and consulted using Modicon, Iconics Genesis 32, and Matrikon n Training - SUMMIT ELECTRIC SUPPLY, Modicon Programming and Networking

National Automation Services, Inc. Corporate Resume

Documents

Transcript of National Automation Services, Inc. Corporate Resume