nanoCBRS E61 CBSD Datasheet 202009 v1
2
4G SOLUTION Standard Ethernet IP backhaul is used. Power is provided from an external DC supply or PoE+. The E61 is designed for wall or ceiling mounting, and is supplied with integrated antennas. nanoCBRS™solution The E61 is part of ip.access’ OnGo certified nanoCBRS private network solution which integrates the following components: • E61 CBSD providing best-in-class performance and EUD compatibility • Virtualized Gateways and SAS Domain Proxy, which securely handle and route all traffic between the CBSDs and other components • Virtualized management systems for CBSD provisioning, maintenance and monitoring • Virtualized Evolved Packet Core for data routing between EUDs, including voice call traffic, and enabling application functionality such as push- to-talk and, optionally, break out to external networks for wider connectivity www.ipaccess.com nanoCBRS ™ E61CBSD 4G Enterprise CBSD for enterprise environments The E61 4G indoor small cell CBRS Basestation Device (CBSD) generates a high quality LTE signal in enterprise and public spaces for TDD deployments nanoCBRS E61 CBSD TheE61CBSD The E61 is an OnGo certified single-band indoor LTE (4G) small cell CBSD, targeted at indoor enterprise environments such as offices, retailers, and indoor public spaces. The E61 significantly improves indoor 4G coverage and capacity. The E61 CBSD can be installed by end- users in an unplanned simple “plug-and- play” installation model, leveraging ip.access’ Self Organising Network (SON) and Network Listen features (deployed in over 2 million small cells worldwide). Alternatively, the E61 CBSD can be installed by qualified technicians and service partners in a more complex planned deployment. With up to 110/10 Mbps LTE TDD performance in 20MHz bandwidth, the E61 supports up to 32 active 4G users. Voice calls are supported with VoLTE. The E61 CBSD is available with Band 48 for OnGo (private LTE on the CBRS 3.5GHz band). Full mobility is provided between the E61 CBSD and neighbouring CBSDs, allowing seamless handover of calls to or from the macro network, including X2 handover support to other ip.access 4G CBSDs connected to the same nanoLTE Gateway.
Transcript of nanoCBRS E61 CBSD Datasheet 202009 v1
4GSOLUTION
Standard Ethernet IP backhaul is used. Power isprovided from an external DC supply or PoE+.
The E61 is designed for wall or ceiling mounting, andis supplied with integrated antennas.
nanoCBRS™ solution
The E61 is part of ip.access’ OnGo certifiednanoCBRS private network solution which integratesthe following components:
• E61 CBSD providing best-in-classperformance and EUD compatibility
• Virtualized Gateways and SAS Domain Proxy,which securely handle and route all trafficbetween the CBSDs and other components
• Virtualized management systems for CBSDprovisioning, maintenance and monitoring
• Virtualized Evolved Packet Core for datarouting between EUDs, including voice calltraffic, and enabling application functionalitysuch as push- to-talk and, optionally, breakout to external networks for wider connectivity
www.ipaccess.com
nanoCBRS™ E61 CBSD4G Enterprise CBSD forenterprise environments
The E61 4G indoor small cellCBRS Basestation Device (CBSD)generates a high quality LTE signalin enterprise and public spaces forTDD deployments
nanoCBRS E61 CBSDThe E61 CBSD
The E61 is an OnGo certified single-band indoor LTE(4G) small cell CBSD, targeted at indoor enterpriseenvironments such as offices, retailers, and indoorpublic spaces.
The E61 significantly improves indoor 4G coverageand capacity. The E61 CBSD can be installed by end-users in an unplanned simple “plug-and-play” installation model, leveraging ip.access’ SelfOrganising Network (SON) and Network Listenfeatures (deployed in over 2 million small cellsworldwide). Alternatively, the E61 CBSD can beinstalled by qualified technicians and service partnersin a more complex planned deployment.
With up to 110/10 Mbps LTE TDD performance in20MHz bandwidth, the E61 supports up to 32 active4G users. Voice calls are supported with VoLTE.
The E61 CBSD is available with Band 48 for OnGo(private LTE on the CBRS 3.5GHz band).
Full mobility is provided between the E61 CBSD andneighbouring CBSDs, allowing seamless handover ofcalls to or from the macro network, including X2handover support to other ip.access 4G CBSDsconnected to the same nanoLTE Gateway.
LTE radio
2 x 2 MIMO, 24dBm per port
5, 10, 15 and 20MHz channelbandwidths
Local Area Base Station class
4G services
Up to 32 users
Up to 110/10 Mbps depending onthe bandwidth configured
VoLTE for voice
Warning system broadcast -CMAS and ETWS supported
Full GBR and non-GBR supportwith QoS aware scheduler
4G mobility
Reselection to/from macro layer& CBSDs Intra-frequency, inter-frequency
Handover to/from macro layer &between CBSDs
intra-frequency,inter-frequencyS1 basedX2-GW based
nanoCBRS E61 CBSD
Interfaces
S1 (S1-Flex via gateway)
X2 (via nanoLTE Gateway)
Uu 4G air interfaces to standard4G EUDs
Band options
TDD LTE48 (CBRS)
Network Listen
LTE Network listen to supportradio synchronisation and RFplanning
Synchronisation
OCXO for high stability internalfrequency
GPS for TDD framesynchronisation
IEEE 1588v2 for on-premisecluster synchronisation
E-class Enterprise CBSDs are designed for enterprises, providingflexible in-building mobile coverage and capacity.
nanoCBRS™ E61 CBSD
www.ipaccess.com
© 2020 ip.access Ltd. ip.access, viper™, nanoCBRS™, nanoLTE™, Oyster3G®, nano3G® and nanoGSM® are trademarks of ip.access Ltd. All other trademarks are acknowledged. Information in this document is subject to change without noticeand may contain errors. No responsibility is assumed by ip.access for the use of this information, nor for infringements of patents or other rights of third parties. The documentation and/or software may provide links to Web sites and access tocontent, products, and services from third parties. ip.access is not responsible for the availability of, or any content provided on, third-party Web sites. You bear all risks associated with the use of such content. This document is the property ofip.access and implies no license under patents, copyrights, trade secrets or other intellectual property rights. No part of this publication may be copied, reproduced, stored in a retrieval system, or transmitted, in any form of any means, electronic,photographic, or otherwise, or used as the basis for manufacture or sale of any items without the prior written consent of ip.access. nanoCBRS E61 CBSD Datasheet 202009 v1.0.
Security
3GPP air interface security
IPsec IKEv2 on CBSD-SeGW links
X.509 certificate authenticationwith CRL
Secure boot and code signing
Environmental & physical
Dimensions290 x 206 x 47mm includingmounting bracket
Weight1.6kg including mountingbracket
Operating temperature range0° to 45°C
Operating humidity10 to 70% non-condensing
Ingress protectionIP30
MountingWall or ceiling mounting
Power input12V DC or PoE+
OnGo CBSDs
Gateways,Management Systems
and EPC
Network/Dev/Sub
Management
NetworkStatus/
PerformanceViewer
SAS
ExpertMode
Day-to-dayOperations
TheInternet
LocalLAN
LocalLAN
nanoCBRS™end-to-endOnGo certifiedsolution
