Multipole connectors Jei series - nowkingJCNE inserts for multipole connectors 2 •polarity: 6, 10,...
Transcript of Multipole connectors Jei series - nowkingJCNE inserts for multipole connectors 2 •polarity: 6, 10,...
iM
ultip
ole
conn
ecto
rsJe
i ser
ies
ENGLISH
ILME
http://ilme.nowking.cn/
The Company and the Product
INDUSTRIA LOMBARDA MATERIALE ELETTRICO SpA has been operating in
Milan since 1938, in particular in the electrotechnical sector for the manufacturing
of equipment for industrial installations.
ILME reflects the traditional entrepreneurial spirit of Lombardy, and has enjoyed
continuous expansion for over half a century. The company has carved an
important role for itself in the main world markets, also operating directly in the
countries that have assumed world leadership in the field of automation, including
Germany and Japan.
In the electrical connection sector with applications in industrial automation,
characterised by top performance and utmost reliability needs, ILME is today
the acknowledged partner of many leading companies worldwide.
The company’s fundamental values are:
product innovation, original solutions, excellent price-quality ratio, a
customer-oriented sense of service, ethical behaviour and an
environmentally-friendly approach.
To promote the continuing improvement of its qualitative results, ILME has
always encouraged its collaborators to work with utmost responsibility and
participation.
The company focuses on a series of benefits to the user, including research into
the most suitable materials, high quality and safe cabling, a rapid turnaround and
readily available services.
CE marking
As from 1 January 1997, in order to launch electrical products on the European
market the manufacturer must ensure these bear the relevant CE marking, in line with
the Low Voltage Directive 73/23/EEC * (implemented in Italy as law 18-10-1977
no. 791) and its modification 93/68/EEC * (implemented in Italy as L. D. 25-11-1996
no. 626/96, published in the supplement to the Gazzetta Ufficiale of 14-12-1996).
Said marking must be placed on the product - or, if this is not possible, on the
packaging, the instructions for use or the warranty certificate - and acts as a
declaration by the manufacturer that the product complies with all relevant EU
directives.
ILME products bear the CE marking on the product or packaging.
Almost all ILME products fall under the Low Voltage Directive. A declaration of
compliance is required before applying the CE marking. This document, to which the
market is not directly entitled, must be made available to the control authorities (in
Italy the Ministry for Industry, Commerce and
Handicraft) at all times.
In it, the manufacturer declares the technical
safety standard(s) followed to manufacture the
product. These standards must be, in decreasing
order of preference:
- a European standard (EN prefix)
- a European harmonisation document
(HD prefix)
- an international IEC standard
- a national standard
- in the absence of reference standards, the
manufacturer’s internal specifications,
guaranteeing compliance with the directive’s
basic safety requirements.
Compliance with harmonised technical
standards (i.e. ratified by the CENELEC)
constitutes presumed conformity to the
directive’s basic safety requirements.
The CE marking of ILME products results from
said products’ declaration of conformity to
harmonised standards or international IEC
standards.
Through the CE marking, ILME declares full
compliance, not merely with the directive’s basic
safety requirements, but also with those
international or national EU standards on which
voluntary safety certification markings are based
(e.g. IMQ and VDE).
In this way, ILME intends to award the CE
marking the value of self-certification in terms of
safety, given the loss in legal value of voluntary
certifications issued by third parties, ratified by
directive 93/68/EEC *.
Notwithstanding the above, practically all ILME
products still bear voluntary conformity markings.
* Note:
new legal reference for the Low Voltage Directive is 2006/95/EC which is the
consolidated edition of Directive 73/23/EEC + Directive 93/68/EEC.
All information contained in this catalogue
is not binding and may be changed without notice
ILME
http://ilme.nowking.cn/
general characteristics
1
• inserts in light technopolymer
• tinned precision contacts
• enclosures in die-cast aluminum alloy
• vertical safety closing levers in zinc-plated steel
ILME
http://ilme.nowking.cn/
JCNE inserts for multipole connectors
2
• polarity: 6, 10, 16, 24 + m
• rated current: 16A
• rated voltage: 500V
• EN 61984 (2009-06): 500V/6kV/3 - 400V/690V/6kV/2
• screw terminal for conductors, section 0.5 - 4 mm2 - AWG 20 - 12, with conductor protection plate
• both slot and cross steel screws
• contact surface: tinned
• made of UL 94V-0 self-extinguishing thermoplastic resin
• UL, CSA, CCC, GL, GOST approved
JCNEF 06 - JCNEM 06 dimensions in mm contacts side (front view)
F M
F M
F M
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
13 14 15 16 17 18 19 20 21 22 23 24
F M
JCNEF 10 - JCNEM 10 dimensions in mm contacts side (front view)
JCNEF 16 - JCNEM 16 dimensions in mm contacts side (front view)
JCNEF 24 - JCNEM 24 dimensions in mm contacts side (front view)
dimensions shown are not binding
and may be changed without notice
44
M
F
27
57
M
F
27
77.5
M
F
27
104
M
F
27
ILME
http://ilme.nowking.cn/
JCNE inserts for multipole connectors
3
JCNE inserts - 16A max - 500V/6kV/3
female inserts (female contacts)
JCNEF 06 06 poles + m for enclosure size 44.27
JCNEF 10 10 poles + m for enclosure size 57.27
JCNEF 16 16 poles + m for enclosure size 77.27 (and 77.62 CLASS)
JCNEF 24 24 poles + m for enclosure size 104.27 (and 104.62 CLASS)
JCNEF 16 N 16 poles + m (numbering 17 - 32) for enclosure size 77.62 CLASS
JCNEF 24 N 24 poles + m (numbering 25 - 48) for enclosure size 104.62 CLASS
male inserts (male contacts)
JCNEM 06 06 poles + m for enclosure size 44.27
JCNEM 10 10 poles + m for enclosure size 57.27
JCNEM 16 16 poles + m for enclosure size 77.27 (and 77.62 CLASS)
JCNEM 24 24 poles + m for enclosure size 104.27 (and 104.62 CLASS)
JCNEM 16 N 16 poles + m (numbering 17 - 32) for enclosure size 77.62 CLASS
JCNEM 24 N 24 poles + m (numbering 25 - 48) for enclosure size 104.62 CLASS
ILME descriptionpart No.
Enclosure identification
Matching connector inserts with the correct enclosures can be complicated.
To simplify we have used the definition of “size” in addition to the product’s normal identification code.
From the figure to the left and the table
below, this new variable refers to the fixing
distance between screw centres which,
being the same for inserts and enclosures.
All the pages illustrating inserts and
enclosures bear the relevant identification
references.
The table below sets out all the enclosure
“sizes” and the dimension of the insert fixing
slots.
enclosure slot for inserts with “size” fixing distance
identification x - y
“44.27” 44 x 27 mm
“57.27” 57 x 27 mm
“77.27” 77.5 x 27 mm
“104.27” 104 x 27 mm
ILME
http://ilme.nowking.cn/
JCSE inserts for multipole connectors
4
• polarity: 6, 10, 16, 24 + m
• rated current: 16A
• rated voltage: 500V
• EN 61984 (2009-06): 500V/6kV/3 - 400V/690V/6kV/2
• spring terminal for conductors, section 0.14 - 2.5 mm2 - AWG 26 - 14
• contact surface: tinned
• made of UL 94V-0 self-extinguishing thermoplastic resin
• UL, CSA, CCC, GL, GOST approved
JCSEF 06 - JCSEM 06 dimensions in mm contacts side (front view)
F M
44
M
F
27
F M
57
M
F
27
F M
77.5
M
F
27
1 2 3 4 5 6 7 8 9 10 11 12
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
13 14 15 16 17 18 19 20 21 22 23 24
F M
104
M
F
27
JCSEF 10 - JCSEM 10 dimensions in mm contacts side (front view)
JCSEF 16 - JCSEM 16 dimensions in mm contacts side (front view)
dimensions shown are not binding
and may be changed without notice
JCSEF 24 - JCSEM 24 dimensions in mm contacts side (front view)
ILME
http://ilme.nowking.cn/
JCSE inserts for multipole connectors
5
JCSE inserts - 16A max - 500V/6kV/3
female inserts (female contacts)
JCSEF 06 06 poles + m for enclosure size 44.27
JCSEF 10 10 poles + m for enclosure size 57.27
JCSEF 16 16 poles + m for enclosure size 77.27 (and 77.62 CLASS)
JCSEF 24 24 poles + m for enclosure size 104.27 (and 104.62 CLASS)
JCSEF 16 N 16 poles + m (numbering 17 - 32) for enclosure size 77.62 CLASS
JCSEF 24 N 24 poles + m (numbering 25 - 48) for enclosure size 104.62 CLASS
male inserts (male contacts)
JCSEM 06 06 poles + m for enclosure size 44.27
JCSEM 10 10 poles + m for enclosure size 57.27
JCSEM 16 16 poles + m for enclosure size 77.27 (and 77.62 CLASS)
JCSEM 24 24 poles + m for enclosure size 104.27 (and 104.62 CLASS)
JCSEM 16 N 16 poles + m (numbering 17 - 32) for enclosure size 77.62 CLASS
JCSEM 24 N 24 poles + m (numbering 25 - 48) for enclosure size 104.62 CLASS
ILME descriptionpart No.
ILME
http://ilme.nowking.cn/
JCV enclosures for multipole inserts
6
• enclosures in aluminum alloy
• painted with grey RAL 7040
• enclosures JCVI / JCVP - JMVP with two levers in zinc-plated steel
• IP66 degree of protection in accordance with EN 60529
• for inserts size 57.27, 77.27, 104.27
JCVI dimensions in mm
type A B C D
JCVI 10 122 95.5 65 83
JCVI 16 142.5 115.5 86 103
JCVI 24 169 142.5 112 130
B
58A
45.5 6
29
Pg/M
4
Ø 5.5
D 58
type A B C D E F
JCVP 10 - JMVP 10.20 57 40 52 122 82 93.5
JCVP 16 - JMVP 16.25 63 45 57 142.5 105 117
JCVP 24 - JMVP 24.25 63 45 57 169 132 144
JCVP - JMVP dimensions in mm
Pg/M
E
F C
B
A
C
35
Ø 4.5
panel cut-out for bulkhead mounting housings in mm
D
32
dimensions shown are not binding
and may be changed without notice
ILME
http://ilme.nowking.cn/
JCV enclosures for multipole inserts
7
bulkhead mounting housings with levers - IP66 (EN 60529)to be coupled with: hoods without gasket, with pegs for two levers
closing covers with pegs for two levers
For JCNE, JCSE, CSH, CNE, CCE, CSE, CSS, CTSE, CTS, CT, CD 40/64, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO inserts
IP69K degree of protection with complete connector (DIN 40050-9)
standard version
JCVI 10 size 57.27
JCVI 16 size 77.27
JCVI 24 size 104.27
Pg threading and metric threading - surface mounting housings with levers - IP66 (EN 60529)to be coupled with: hoods without gasket, with pegs for two levers
closing covers with pegs for two levers
For JCNE, JCSE, CSH, CNE, CCE, CSE, CD 40/64, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO inserts
IP69K degree of protection with complete connector (DIN 40050-9)
Pg part No. standard version Metric part No.JCVP 10 size 57.27 - Pg 16 JMVP 10. 20 size 57.27 - M 20JCVP 16 size 77.27 - Pg 21 JMVP 16.25 size 77.27 - M 25JCVP 24 size 104.27 - Pg 21 JMVP 24.25 size 104.27 - M 25
- high construction enclosures upon request
- characteristics of other inserts, not belonging to the Jei series, in the CN.12 catalogue
ILME descriptionpart No.
ILME
http://ilme.nowking.cn/
CH enclosures for multipole inserts
8
• enclosures in aluminum alloy
• painted with grey RAL 7040
• CHO - MHO / CHV - MHV enclosures with 4 pegs for 2-lever enclosures
• IP degree of protection with connector coupled, locked with lever and complete with suitable cable glands
• UL Type 12 (Nema12),Type 4 (Nema 4), Type 4x (Nema 4x) protection according to ANSI/UL50
• for inserts size 57.27, 77.27, 104.27
CHO - MHO dimensions in mm
CHV - MHV dimensions in mm
Pg/M
43A
B
Pg/M
43A
BC
type A B
CHO 10 / MHO 10.20 - MHO 10.25 73 52
CHO 16 / MHO 16.25 - MHO 16.32 93.5 63
CHO 24 / MHO 24.25 - MHO 24.32 120 63
type A B C
CHV 10 / MHV 10.20 - MHV 10.25 73 45 58
CHV 16 / MHV 16.25 - MHV 16.32 93.5 45 58
CHV 24 / MHV 24.25 - MHV 24.32 - MHV24.40 120 55 69.5
dimensions shown are not binding
and may be changed without notice
ILME
http://ilme.nowking.cn/
CH enclosures for multipole inserts
9
Pg threading and metric threading - side entry - with four pegs without gasketto be coupled with: bulkhead or surface mounting housings with two levers and gasket
hoods with two levers and gasket
closing covers with two levers and gasket
standardPg part No. Metric part No.
standard version for JCNE, JCSE, CSH, CNE, CCE, CSE, CSS, CD, CDA, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO, CME/CMCE 12 inserts
CHO 10 size 57.27 - Pg 16 MHO 10.20 size 57.27 - M 20
MHO 10.25 size 57.27 - M 25
CHO 16 size 77.27 - Pg 21 MHO 16.25 size 77.27 - M 25
MHO 16.32 size 77.27 - M 32
CHO 24 size 104.27 - Pg 21 MHO 24.25 size 104.27 - M 25
MHO 24.32 size 104.27 - M 32
- high construction enclosures upon request
- characteristics of other inserts, not belonging to the Jei series, in the CN.12 catalogue
Pg threading and metric threading - top entry - with four pegs without gasketto be coupled with: bulkhead or surface mounting housings with two levers and gasket
hoods with two levers and gasket
closing covers with two levers and gasket
standardPg part No. Metric part No.
standard version for JCNE, JCSE, CSH, CNE, CCE, CSE, CD, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO, CME/CMCE 12 inserts
CHV 10 size 57.27 - Pg 16 MHV 10.20 size 57.27 - M 20
MHV 10.25 size 57.27 - M 25
CHV 16 size 77.27 - Pg 21 MHV 16.25 size 77.27 - M 25
MHV 16.32 size 77.27 - M 32
CHV 24 size 104.27 - Pg 21 MHV 24.25 size 104.27 - M 25
CHV 24.29 size 104.27 - Pg 29 MHV 24.32 size 104.27 - M 32
MHV 24.40 size 104.27 - M 40
- high construction enclosures upon request
- characteristics of other inserts, not belonging to the Jei series, in the CN.12 catalogue
ILME descriptionpart No.
ILME
http://ilme.nowking.cn/
JCV enclosures for multipole inserts
10
• enclosures in aluminum alloy
• painted with grey RAL 7040
• enclosures JCVI L / JCVP L - JMVP L with one lever in zinc-plated steel
• IP66 degree of protection in accordance with EN 60529
• for inserts size 44.27, 57.27, 77.27, 104.27
JCVI L dimensions in mm
type A B C D
JCVI 06 L 66 82.5 52 70
JCVI 10 L 70 95.5 65 83
JCVI 16 L 70 115.5 86 103
JCVI 24 L 70 142.5 112 130
type A B C D E F
JCVP 06 L - JMVP 06 L20 53 40 52 70 70 82
JCVP 10 L - JMVP 10 L20 57 40 52 73 82 93.5
JCVP 16 L - JMVP 16 L25 63 45 57 75.5 105 117
JCVP 24 L - JMVP 06 L25 63 45 57 75.5 132 144
JCVP L - JMVP L dimensions in mm
B
Ø 5.5
A
45.5
29
6
B4
C
E
F
Pg/M Pg/M
D
A
C
35
Ø 4.5
panel cut-out for bulkhead mounting housings in mm
D
32
dimensions shown are not binding
and may be changed without notice
ILME
http://ilme.nowking.cn/
JCV enclosures for multipole inserts
11
bulkhead mounting housings with single lever - IP66 (EN 60529) to be coupled with: hoods with pegs for one lever
closing covers with pegs for one lever
For JCNE, JCSE, CSH, CNE, CCE, CSE, CSS, CTSE, CTS, CT, CD 40/64, CDD, CQE, CME 20/32, CMCE 3/6/10, CMSE,
CP, CX, MIXO inserts
IP69K degree of protection with complete connector (DIN 40050-9)
standard version
JCVI 06 L size 44.27
JCVI 10 L size 57.27
JCVI 16 L size 77.27
JCVI 24 L size 104.27
Pg threading and metric threading - surface mounting housings with single lever - IP66 (EN 60529)to be coupled with: hoods without gasket, with pegs for one lever
closing covers with pegs for one lever
For JCNE, JCSE, CSH, CNE, CCE, CSE, CD 40/64, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO inserts
IP69K degree of protection with complete connector (DIN 40050-9)
Pg part No. standard version Metric part No.JCVP 06 L size 44.27 - Pg 16 JMVP 06 L20 size 44.27 - M 20JCVP 10 L size 57.27 - Pg 16 JMVP 10 L20 size 57.27 - M 20JCVP 16 L size 77.27 - Pg 21 JMVP 16 L25 size 77.27 - M 25JCVP 24 L size 104.27 - Pg 21 JMVP 24 L25 size 104.27 - M 25
- high construction enclosures upon request
- characteristics of other inserts, not belonging to the Jei series, in the CN.12 catalogue
ILME descriptionpart No.
ILME
http://ilme.nowking.cn/
JCV enclosures for multipole inserts
12
• enclosures in aluminum alloy
• painted with grey RAL 7040
• JCVI LP / JCVP LP - JMVP LP enclosures with one lever in zinc-plated steel and a cover in self-extinguishingthermoplastic material
• IP66 degree of protection in accordance with EN 60529
• for inserts size 44.27, 57.27, 77.27, 104.27
JCVI LP dimensions in mm
type A B C D E F
JCVP 06 LP - JMVP 06 LP20 53 40 52 91 70 82
JCVP 10 LP - JMVP 10 LP20 57 40 52 94 82 93.5
JCVP 16 LP - JMVP 16 LP25 63 45 57 94 105 117
JCVP 24 LP - JMVP 24 LP25 63 45 57 94 132 144
JCVP LP - JMVP LP dimensions in mm
Ø 5.5
A
B
29
45.56
A
B
C
E
F
Pg/M Pg/M
D
4
type A B C D
JCVI 06 LP 82.5 89 52 70
JCVI 10 LP 95.5 94 65 83
JCVI 16 LP 115.5 94 86 103
JCVI 24 LP 142.5 94 112 130
C
35
Ø 4.5
panel cut-out for bulkhead mounting housings in mm
D
32
dimensions shown are not binding
and may be changed without notice
ILME
http://ilme.nowking.cn/
JCV enclosures for multipole inserts
13
bulkhead mounting housings with lever and insulating cover - IP66 * (EN 60529)to be coupled with: hoods with pegs for one lever
For JCNE, JCSE, CSH, CNE, CCE, CSE, CSS, CTSE, CT, CD 40/64, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO inserts
IP69K degree of protection with complete connector (DIN 40050-9)
* The enclosures ensure IP65 protection rating when cover closed and locked with the closing levers
standard version
JCVI 06 LP size 44.27
JCVI 10 LP size 57.27
JCVI 16 LP size 77.27
JCVI 24 LP size 104.27
Pg threading and metric threading - surface mounting housings
with lever and insulating cover - IP66 * (EN 60529)to be coupled with: hoods with pegs for one lever
For JCNE, JCSE, CSH, CNE, CCE, CSE, CD 40/64, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO inserts
* The enclosures ensure IP65 protection rating when cover closed and locked with the closing levers
Pg part No. standard version Metric part No.JCVP 06 LP size 44.27 - Pg 16 JMVP 06 LP20 size 44.27 - M 20JCVP 10 LP size 57.27 - Pg 16 JMVP 10 LP20 size 57.27 - M 20JCVP 16 LP size 77.27 - Pg 21 JMVP 16 LP25 size 77.27 - M 25JCVP 24 LP size 104.27 - Pg 21 JMVP 24 LP25 size 104.27 - M 25
- high construction enclosures upon request
- characteristics of other inserts, not belonging to the Jei series, in the CN.12 catalogue
ILME descriptionpart No.
ILME
http://ilme.nowking.cn/
CH enclosures for multipole inserts
14
• enclosures in aluminum alloy
• painted with grey RAL 7040
• CHO L - MHO L / CHV L - MHV L enclosures with 2 pegs for 1-lever enclosures
• IP degree of protection with connector coupled, locked with lever and complete with adequate cable glands
• cUL(UL for USA and Canada) approved with UL Type 12 (Nema12),Type 4 (Nema 4), Type 4x (Nema 4x) protection according to ANSI/UL50
• for inserts size 44.27, 57.27, 77.27, 104.27
CHO L - MHO L dimensions in mm
CHV L - MHV L dimensions in mm
Pg/M
43A
type A B
CHO 06 L13 - MHO 06 L20 60 47
CHO 06 L16 - MHO 06 L25 60 47
CHO 10 L - MHO 10 L20 / MHO 10 L25 73 52
CHO 16 L - MHO 16 L25 / MHO 16 L32 93.5 63
CHO 24 L - MHO 24 L25 / MHO 24 L32 120 63
type A B C
CHV 06 L13 - MHV 06 L20 60 40 53
CHV 06 L16 - MHV 06 L25 60 40 53
CHV 10 L - MHV 10 L20 / MHV 10 L25 73 45 58
CHV 16 L - MHV 16 L25 / MHV 16 L32 93.5 45 58
CHV 24 L - MHV 24 L25 / MHV 24 L32 120 55 69.5
B
Pg/M
43A
BC
dimensions shown are not binding
and may be changed without notice
ILME
http://ilme.nowking.cn/
CH enclosures for multipole inserts
15
Pg threading and metric threading - side entry - with two pegsto be coupled with: bulkhead or surface mounting housings with lever
hoods with lever
closing covers with lever
standardPg part No. Metric part No.
standard version for JCNE, JCSE, CSH, CNE, CCE, CD 40/64, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO, CME/CMCE 12/20/32 inserts
CHO 06 L13 size 44.27 - Pg 13.5 MHO 06 L20 size 44.27 - M 20
CHO 06 L16 size 44.27 - Pg 16 MHO 06 L25 size 44.27 - M 25
CHO 10 L size 57.27 - Pg 16 MHO 10 L20 size 57.27 - M 20
MHO 10 L25 size 57.27 - M 25
CHO 16 L size 77.27 - Pg 21 MHO 16 L25 size 77.27 - M 25
MHO 16 L32 size 77.27 - M 32
CHO 24 L size 104.27 - Pg 21 MHO 24 L25 size 104.27 - M 25
MHO 24 L32 size 104.27 - M 32
- high construction enclosures upon request
- characteristics of other inserts, not belonging to the Jei series, in the CN.12 catalogue
Pg threading and metric threading - top entry - with two pegsto be coupled with: bulkhead or surface mounting housings with lever
hoods with lever
closing covers with lever
standardPg part No. Metric part No.
standard version for JCNE, JCSE, CSH, CNE, CCE, CSE, CD 40/64, CDD, CQE, CMCE 3/6/10, CMSE, CP, CX, MIXO, CME/CMCE 12/20/32 inserts
CHV 06 L13 size 44.27 - Pg 13.5 MHV 06 L20 size 44.27 - M 20
CHV 06 L16 size 44.27 - Pg 16 MHV 06 L25 size 44.27 - M 25
CHV 10 L size 57.27 - Pg 16 MHV 10 L20 size 57.27 - M 20
MHV 10 L25 size 57.27 - M 25
CHV 16 L size 77.27 - Pg 21 MHV 16 L25 size 77.27 - M 25
MHV 16 L32 size 77.27 - M 32
CHV 24 L size 104.27 - Pg 21 MHV 24 L25 size 104.27 - M 25
MHV 24 L32 size 104.27 - M 32
CHV 24 L29 size 104.27 - Pg 29 MHV 24 L40 size 104.27 - M 40
- high construction enclosures upon request
- characteristics of other inserts, not belonging to the Jei series, in the CN.12 catalogue
ILME descriptionpart No.
ILME
http://ilme.nowking.cn/
CR accessories for multipole connectors
16
code pins and guidessingle pin - in steel - for 6 variants
CR 20 D for connector inserts
double pin - in steel - for 16 variants
CRM D male - for connector inserts
CRF D female - for connector inserts
drawing ILME descriptionpart No.
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
M F M F M F M F
M F M F M F M F
M F M F M F M F
M F M F M F M F
M
1 2
3 4
5 6
7 8
9 10
11 12
13 14
15 16
M M F F M FM F
M M F F M FM F
M M F F M FM F
M M F F M FM F
M M F F M FM F
M M F F M FM F
M M F F M FM F
M M F F M FM F
application with double inserts
application with single insert
� female code pin (CRF D)
� male code pin (CRM D)
+ normal fixing screw
M = male insert
F = female insert
M
1 2 3
4 5 6
F M F M F
M F M F M F
M
3 4
1 2
5 6
M M F F M FM F
M M F F M FM F
M M F F M FM F
application with double inserts
� code pin (CR 20 D)
+ normal fixing screw
M = male insert
F = female insert
application with single insert
selection using single code pins selection using double code pins
ILME
http://ilme.nowking.cn/
CHC single or double closing covers
• CHO, CHV, MHO and MHV enclosures with stainless steel lever and self-extinguishing thermoplastic handle
• IP65 (EN 60529) degree of protection with connector coupled, locked with lever and complete with adequate cable glands
• cUL(UL for USA and Canada) approved with UL Type 12 (Nema12),Type 4 (Nema 4), Type 4x (Nema 4x) protection according to ANSI/UL50
covers with pegs without gasket - IP65 (EN 60529)to be coupled with: housings and hoods with one lever and gasket
single closureCHC 06 L size 44.27
CHC 10 L size 57.27
CHC 16 L size 77.27
CHC 24 L size 104.27
ILME descriptionpart No.
covers with pegs without gasket - IP65 (EN 60529)to be coupled with: housings and hoods with two levers and gasket
double closureCHC 10 size 57.27
CHC 16 size 77.27
CHC 24 size 104.27
• enclosures with stainless steel lever and self-extinguishing thermoplastic handle
• IP65 (EN 60529) degree of protection with connector coupled, locked with lever and complete with adequate cable glands
• UL Type 12 (Nema12),Type 4 (Nema 4), Type 4x (Nema 4x) protection according to ANSI/UL50
17
ILME
http://ilme.nowking.cn/
CK - CKSScrew terminal connection 10A - 250V
Spring connection 10A - 400V
.................................... from page 41
CDDCrimp connection 10A - 250V
...................................... from page 58
CQCrimp connection 10A/16A/40A
..................................... from page 67
CDA - CDCScrew terminal connection 16A - 250V
Crimp connection 16A - 250V
...................................... from page 72
CSHSpring connection 16A - 500V
without tools
...................................... from page 86
CNE - CSE - CCEScrew terminal connection 16A - 500VSpring connection 16A - 500VCrimp connection 16A - 500V
..................................... from page 95
CT - CTE - CTSScrew terminal connection 16A - 400V/500V
Spring connection
...................................... from page 124
JCNE - JCSEScrew terminal connection 16A - 500V
Spring connection 16A - 500V
.................................... from page 106
C-TYPE- metallic
- CLASS rotative lever
- IP65/IP66
page 200
T-TYPE- insulating
- robust
- resistant to chemical agents
- IP65
page 277
V-TYPE IP67- metallic
- water tightness in a limited space
- lever in stainless steel
- IP66/IP67
page 249
JEI- metallic
- lever in galvanised steel
- economic
- IP66
page 287
V-TYPE IP65/IP66- metallic
- water tightness in a limited space
- lever in stainless steel
- IP65/IP66
page 260
BIG - HOOD- large and modular
- multiple cable entries
- simple and easy cable inspection
- seat for electronic boards
- IP66
page 296
Pag
e r
efe
ren
ces,
CN
.12 c
ata
log
ue
www.ilme.com
18
CT - CTSScrew terminal connection 10A - 250V
Spring connection 10A - 250V
...................................... from page 54
CQECrimp connection 16A - 500V
...................................... from page 79
CSSSpring connection 16A - 500V
dual terminale
..................................... from page 118
CDCrimp connection 10A - 250V
10A - 50V
..................................... from page 44
ILME
http://ilme.nowking.cn/
19
DESINACrimp connection
................................... from page 449
MIXOSpring connection 16A
................................... from page 172
MIXOPneumatic
.................................... from page 191
CPScrew terminal connection
35A - 400V/690V
................................... from page 149
CXScrew terminal connection 16A/80A
.................................... from page 154
MIXOCrimp connection 200A/100A/70A
40A/16A/10A/5A
....................................... from page 160
MIXOScrew terminal connection 40A
................................... from page 165
CMCE - CME - CMSECrimp connection 16A - 830VScrew terminal connection 16A - 830VSpring connection 16A - 830V
................................... from page 134
CX - MIXED INSERTSCrimp connection 10A/16A/40A
................................... from page 151
PANEL MOUNTING.............................................. page 413
COB- mounting inside control panel
- inspectable
............................................. page 408
W-TYPE - metallic with chrome treatment
- for aggressive environments
- IP66
page 322
CENTRAL LEVER- for limited mounting spaces
- reduces insert uncoupling stress
- IP65
page 359
EMC- for electromagnetic compatibility
- with conductive gaskets
- IP66
page 335
IP68- watertight
- mechanical robustness
- resistant to chemical agents
- screw or bayonet locking
page 369
180 °C- metallic
- for high temperature environments
- IP65
page 352
830V- insulated for CME and CMCE 16p inserts
- CLASS rotative lever
- IP65/IP66
page 390
Pag
e r
efe
ren
ces,
CN
.12 c
ata
log
ue
www.ilme.com
MIXOData RJ45-USB-POF
BUS-COAX
...................................... from page 183
ILME
http://ilme.nowking.cn/
NotesILME
http://ilme.nowking.cn/
IMPORTANT NOTES
ILME designs and manufactures complete solutions for heavy duty electrical power connections.
The connector, although offered to the user as a variety of elements (usually inserts and enclosures) in order to allow
selection of the ideal combination, has been designed as a single part and tested to be compliant with the essential
safety requirements of the EU Low Voltage Directive 2006/95/EC and in particular the EN 61984 standard.
The design of this “modular” system guarantees that every approved combination of inserts, enclosures and accessories
cannot result as improper.
The products in this catalogue cannot guarantee by themselves the best functionality on installation, as this depends also
on their correct “put into service” which must be performed in compliance with the applicable system safety standards
and according to the “rule of the art”.
Therefore the effectiveness of the “put into service” of the connector depends on the choices of the end user who must
also take into account the following safety requirements.
Connectors must not be connected or disconnected when live or under load.
After wiring the inserts it is necessary to verify the continuity of the protective earth connections.
The correct coupling of the inserts is guaranteed only if they are installed (with the four fixing screws supplied) inside the
corresponding enclosures or on compatible accessories in this catalogue. I.L.M.E. SpA is not responsible for any
different application.
Wiring of screw-type terminal connections must be carried out applying the correct tightening torque in order to avoid
false contacts or damage to the conductor, the screw or the terminal.
Crimping tools and contacts used should preferably be supplied by the same manufacturer to avoid difficulties of
insertion and retention of the contacts themselves.
Wiring of spring-clamp connection inserts is guaranteed only when the correct screwdriver indicated in the specific
catalogue, or possibly on the insert, is used.
Avoid forcing the contacts during connection and disconnection.
Connectors must be coupled and uncoupled in the axial direction with respect to the contacts, without bending and pulling
the attached conductor bundles or cables.
Installation of two inserts side by side, in enclosures with two bays, must respect the polarity drawing marked on the
insert (or the contact-side view, as shown in this catalogue) to avoid inverted coupling.
The installation of two or more identical connectors side by side is recommended only with the use of coding pins in order
to avoid mismatched couplings.
In order to keep the declared degree of protection (IP code), enclosures must be completed with cable glands or other
accessories with at least equivalent protection rating.
Moreover, the IP protection rating (according to EN 60529) is guaranteed when the enclosures, complete with inserts,
are coupled and locked with their locking levers (or devices).
Finally, remember that:
- ILME cannot be held responsible for use of individual components and/or for uses other than those described in this
catalogue.
- ILME cannot be held responsible for inadequate connector selection in relation to application environmental conditions
(e.g.: influence of ambient temperature, moisture, corrosion due to environmental pollution, etc.).
Connector inserts and their enclosures are generally compatible with similar/equivalent products from other
manufacturers, according to the last samples tested.
Full compatibility cannot be guaranteed in the event of technical changes made by other manufacturers.
In particular, maximum performance of IP68 enclosures (Series CG) cannot be guaranteed when coupled with other
manufacturers’ products.
I.L.M.E. SpA takes no responsibility in verifying whether the components herein contained comply with any specific
regulations of fields of application.
ILME
http://ilme.nowking.cn/