Multi-Tasking Machine TMM-Series - langdrehen.de · Process Integration Complete Machining...

TMM-SeriesMulti-Tasking Machine

TAKISAWA TMM series are combined machines with high accuracy and

high efficiency in which turning and machining processes are completely

integrated. By changing the production line from serial to parallel and

automating the process using gantry loader and robot, they provide

rationalization investment effect.

With two spindles and two turrets located on the left, right, top,

and bottom, TMM series are able to perform complete machining

with high accuracy by one chucking. Therefore, they realize

overall cost reduction, high productivity, and high value added

production, such as lead time reduction, by reducing workpiece

transfer in the processes and greatly reducing setup time.

Process Integration > Automation > TMM-series Mult i-tasking Machine

21

Process Integration Complete Machining

Combination of B-axis and Y-axis control achieves advanced milling.

Module-3 contributes to high value added production.

Milling and Y-axis control realize highly efficient process integration. Module-1 contributes to high productivity.

Module-3 Tool Spindle Type, Multi-Tasking Machine

TMM-250

Module-1 Turret Type, Multi-Tasking Machine

TMM-250

TMM-Series

&

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 43

#1-System Headstock (SP1)

#1-System Tool Spindle (T1)

#2-System Turert (T2)


Module-3 Axis Configuration 9-Axes ControlSimultaneous Axis Control : 4-Axes (Standard) FANUC series : 31i-B : 5-Axes (Optional) FANUC series : 31i-B5

Module-3 Tool Spindle + Lower Turret

Module-3 is equipped with the tool spindle as the standard which has cutting performance of a full-scale machining center and a high-speed, high-accuracy index mechanism. Advanced milling is realized by combining 8000 min-1/11 kW milling power and B- and Y-axes control.15kW High-torque tool spindle, and 12,000min-1 high revolution. As to the tool spindle, 15kW high-torque type, and 12,000min-1 high revolution type both for 11kW and 15kW are selectable.The lower 15-station turret provides stable machining accuracy by the index device with high repeatability and excellent centripetal feature. For the 15-station turret, 4000 min-1/5.5 kW milling specification is optionally available. A vast range of tooling variations is available according to the workpiece, leading to high value added production.

Machining Ability

Max. Turning Diameter ： 350mm (15-Station Turret)

/ 500mm (Tool Spindle)

Max. Turning Length : 1300mm

Recommended Chuck SizeSpindle Speed

#1 Spindle #2 Spindle

TMM-250 Module-3 10" 8" 4000min-1

Tool Spindle

15-Station Turret

Module-3 achieves advanced milling by

combining B-axis and Y-axis control and contributes

to high value added production.

M1 M3 M3 (Standard) : 9-Axes

X1/Z1/Y/B/C1/C2/A/X2/Z2

Left Spindle

+ Tool Spindle

+ Right Spindle

+ #2-System Turret

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 65

Module-1 Upper and Lower Milling Turrets

Module-1 is equipped with upper and lower 15-station milling turrets as the standard which has both the highest accuracy and turning capability in this class and 6000 min-1/5.5 kW milling ability. The turret index device provides stable machining accuracy by the excellent repeatability and centripetal feature. Using the exclusive double holder, 30 tools in total can be mounted. Furthermore, if the holders are used on both turrets, 60 tools are possible. Rotary tools can be mounted in the all positions.The upper turret can perform Y-axis controlled milling. A vast range of tooling variations according to the workpiece realizes highly efficient process integration, leading to high productivity.

Machining AbilityMax. Turning Diameter

　TMM-250 Module-1　： 350mm

Max. Turning Length

　TMM-250 Module-1　： 800mm(L8)、

1300mm(L13)

Recommended Chuck SizeSpindle Speed

#1 Spindle #2 Spindle

TMM-250 Module-1 10" 8" 4000min-1


#1-System Turret (T1)

#2-System Turert (T2)


Module-1 Axis Configuration 8-Axes ControlSimultaneous Axis Control : 4-Axes (Standard) FANUC series : 31i-B

Milling and Y-axis control realize

highly efficient process integration.

Module-1 contributes to high productivity.

Exclusive Double Boring Bar Holder (Turning)

M1 M3M1 (Standard) : 8-Axes

X1/Z1/Y/C1/C2/A/X2/Z2

Left Spindle

+ #1-System Turret

+ Right Spindle

+ #2-System Turret

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 87

TAKISAWA TMM series improve the basic performance of turning and machining processes to meet expectations for automation and complete parts machining which requires both processes.

Automated Machining by Gantry LoaderTAKISAWA combines custom technologies of process integration and automation system production to meet expectations for rationalization investment according to customers' requests.

Module-3 Gantry Loader Loader Specification

Target Workpiece

Outside Diameter mm 35 ～ 250

Length mm 200

Weight kg 15 （×2）

Travel X-Axis （Vertical） mm 615

Y-Axis mm -

Z-Axis （Longitudinal） mm 3720

Running Speed

X-Axis m/min 80

Y-Axis m/min 120

Z-Axis m/min -

Hand Type3 Jaws

（MHS3-125D）

Jaws open/close Stroke (Diameter)

mm 32

TMM-250 Module-3 TMM-250 Module-1

Intelligent Loader and MeasurementThe loader-specific software (RAKU-RAKU loader) has been developed to control complicated loader operation with the minimum steps. Furthermore, the software for tool management, load management, compensation management, operation information collection, and measurement management (the RAKU-RAKU monitor, the measurement monitor) helps full automatic operation.

Work Piece Feeder Specifications

Number of Pallets 10, 16

Max. Work Diameter mm 250

Min. Work Diameter mm 35

Loading Capacity Per Pallet kg 80

Workpiece Stacking Height mm 400

＜ RAKU-RAKU Monitor 3 ＞

＜ Measurement Monitor 3 ＞(Optional function of the RAKU-RAKU Monitor 3. Measurement unit is required.)

Automation

Continuous Machining by Bar FeederTMM provides excellent machining capability in bar machining. Complete parts are cut out of a long solid bar material. Parts catcher, discharge conveyor, etc. are available to eject completed parts.

TMM-250

Module-3 Module-1

Bar Capacity （#1-System Spindle）

φ76.2 φ76.2

Bar Feeder Vip80

The bar feeder operation can be programmed easily with the operation panel, and thus the bar feeder is suitable for small and medium sized productions requiring frequent setup changes.

The double-bar pusher requires the minimized floor space for operation.

Bar Length 1400mm (A-Type), 1500mm (B-Type)

Length of Bar Storage Shelf 650mm, Max. 220kg

Weight 450kg (A-Type), 500kg (B-Type)

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 109

Long Work ProcessingOption for TMM-250 Module-1. The maximum machining length is 800 mm (L8) for standard machines and 1300 mm (L13) for optional machines.

TMM-250 Module-1 （L13） TMM-250 Module-1 （L8）

* For other options, see page 27.

Option Expanding PossibilitiesOptional

Hydraulic Chuck SystemHollow Type / Solid Type

Left Side Headstock（#1-System）

Right Side Headstock（#2-System）

TMM-250 Module-3

TMM-250 Module-1

Chuck

Name Hollow Chuck Solid Chuck Hollow Chuck Solid Chuck

Type BBM-250 ANM250-FL BHM-210 ANM210-FL

Through-Hole Diameter mm 78 - 52 -

Max. Spindle Speed min-1 4000 4000 5000 5000

Cylinder

Name Hollow Chuck Solid Chuck Hollow Chuck Solid Chuck

Type VNK170-77 150SIN-S VNK130-52 125SIN-S

Through-Hole Diameter mm 77 - 52.5 -

Max. Spindle Speed min-1 5000 6000 6300 6000

Chuck/Cylinder ： SMW-AUTOBLOK

Configuration example of the typical 3-jaw hydraulic chuck system.The cylinder indicated by is a standard accessory.

TailstockProgrammable Traversing Tailstock （Module-3）

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 12The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.11

#1-System Spindle （Left Side） #2-System Spindle （Right Side）

24

0

10

21kW

14.3kW

22kW

15kW

20

0 1000 2000 3000 4000（min-1)

（min-1)

（min-1)

（min-1)

900 3800

Spindle Speed

(kW)

22kW S2 30min Operating Area

15kW S1 Continuous Operating Area

4000min-1 FANUC : BiI200M

High

233N・m

159N・m

24

0

10

20

0 300 600 900485 570

Spindle Speed

(kW)

22kW S2 30min Operating Area

S3 25% Operating Area


Low

433N・m

295N・m369N・m

20

0

10

14.8kW

9.5kW

7.5kW

5.5kW

0 1000 2000 3000 4000

850975 3250

Spindle Speed

(kW)

18.5kW S3 40% Operating Area


4000min-1 FANUC : BiI160M

High

208N・m

124N・m

181N・m

10

0

2.5

5

7.5

0 300 600 850220

Spindle Speed

(kW)

7.5kW S3 15% Operating Area5.5kW S1 Continuous Operating Area

Low

326N・m

175N・m


TMM-250 Module-3/Module-1HeadstockHigh Power Built-in Motor

High power built-in motor spindles are used for the left spindle (#1 system) and the right spindle (#2 system) of TMM.For TMM-250 Module-3/Module-1, 22/15 kW motor is set for the left spindle and 18.5/11 kW motor for the right spindle as the standard. The built-in motor spindles are 2-step pole-change motors and deliver high torque in a low speed range.

The 30-, 60-, and 90-tool magazines are indexed in the same time to achieve speed up.

Max. Tool Length ： 400mmMax. Tool Diameter ： 100mm, with Adjacent Tool ： 90mmTool Storage Capacity ： 30pcs (Standard), 60pcs/90pcs (Optional)

*Optional for Bar Feeder

Tool Storage Method : Fixed Address

Tool Selection Method : Bidirectional

Tool MagazineThe drum type magazine with short waiting time!

60pcs (Optional)

30pcs (Standard)

Capability・Performance

Rotary Tool （for #1/#2-System Turret）

（min-1)

8

0

2

4

65.5kW

3.7kW

0 1000 30002000 40001500

Spindle Speed

(kW)

5.5kW 15min S3 25% Operating Area

3.7kW Continuous Operating Area60min S3 40% Operating Area

4000min-1 FANUC : βiI3/10000

35N・m

24N・m

18N・m

（min-1)

8

0

2

4

64.8kW

3.3kW

0 1000 5000400030002000 60001500 1500

Spindle Speed

(kW)

5.5kW 15min S3 50% Operating Area

3.7kW Continuous Operating Area60min S3 40% Continuous Operating Area

6000min-1 FANUC : βiI3

35N・

m

24N・m

18N・m

TMM-250Rotary Tool Motor ： 5.5kW/4000min-1Max. 35Nm* The Module-3 lower turret for rotary tools is optional.


Tool Spindle

12

0

42

6

9.9kW

7.5kW

18.5kW

11kW

15kW

10

8

20

0

5

15

10

0 1000 2000 3000 80004000 5000 6000 7000

0 1000 2000 3000 80004000 5000 6000 7000

（min-1)

（min-1)

1750 2300

Tool Spindle Speed

(kW)

11kW S2 25% Operating Area

7.5kW S1 Continuous Operating Area

8000min-1 FANUC : BiI112S

High

60N・

m46

N・m

24N・m

31N・

m

Tool Spindle Speed

(kW)

18.5kW S2 10min15kW S2 30min11kW S1Continuous Operating Area

Low

29N・m

18N・m

Low



16

0

4

8

13kW

7.5kW12

0 2000 60004000（min-1)

1300 2300

Tool Spindle Speed

(kW)



110N・m

62N・

m46N・

m

18

12

0

4

13kW15kW

11kW

18.5kW22kW

11kW15kW

8

25

20

0

5

15

10

0 2000 60004000

0 2000 1200090006000

（min-1)

（min-1)

1300 2300 5000

Tool Spindle Speed

(kW)




High

110N・m

62.3N・m

23.9N・m

45.7N・m

Tool Spindle Speed

(kW)

18.5kW S2 10min Operating Area22kW S3 25% Operating Area

15kW S2 30min Operating Area11kW S1Continuous Operating Area

Low

29.4N・m35N・m

17.5N・m


15kW11kW

18.5kW20

25

0

5

15

10

0 3000 120006000 9000

3000 120006000 9000

（min-1)

29N・m

24N・m

Tool Spindle Speed

(kW)

15kW S2 30min Operating Area18.5kW S2 10min Operating Area


Low

18N・m


16

0

4

8

11kW

5.5kW3.7kW

7.5kW

12

0（min-1)

1750 2300 80007000

Tool Spindle Speed

(kW)


11kW S3 25% Operating Area 7.5kW S1 Continuous Operating Area

High

60N・

m

46N・

m

31N・

m

18.5kW22kW

11kW15kW

25

20

0

5

15

10

0 2000 80004000 6000（min-1)

(kW) High

23.9N・m

Tool Spindle Speed

18.5kW S2 10min22kW S3 25%

15kW S2 30min11kW S1Continuous Operating Area

29.4N・m35N・m

17.5N・m


StandardTool Spindle Motor ： 11kW

Module-3

Module-1

15-Station Milling Turret, VDI Quick Change Type (#1/#2-System Turret)Upper and lower 15-station milling turrets which allow a variety of tooling variations are equipped as the standard. Using double holders on the both side, 60 tools in total can be mounted. Rotary tools (power tools) can be mounted in all positions of the turrets. The turret index device provides stable machining accuracy by the excellent repeatability and centripetal feature.

Number of Attachable Tools : 15 Index Time : 0.6sec./1 Station

Rotary Tool ： 4000min-1

Tool Spindle (#1-System Turret) 1° Indexing Coupling Clamp SystemMax. Spindle Speed : 8000min-1, [Op.12000min-1] Motor : 11/7.5kW [Op.15/11kW]

Type of Tool Shank : CAPTO C6 Max Tool Length : 400mm

Max. Tool Diameter : 120mm, with Adjacent Tool :

105mm

Tool Storage Capacity (Drum Type Magazine) :

30pcs [Op. 60/90pcs]

15-Station Turret, VDI Quick Change Type (#2-System Turret)Number of Attachable Tools : 15 Index Time : 0.6sec./1 Station

Optional : 4000min-1/5.5kW Milling Turret Type

15-Station Milling Turret（Upper）

15-Station Milling Turret（Lower）

Tool Spindle（Upper）

15-Station Turret（Lower）

Tool SpindleOptimum spec balance covers wide machining ranges.

B-Axis Swivel Range : 230°(±115°)

Y-Axis Working Range ： 260mm

X1-Axis Travel : 560mm

Z1-Axis Travel : 1300mm

Cs-Axis Swivel Range : 360°

(Min. Index Angle 0.001deg.)

High Rigidity Y-Axis Control

(For Upper Side : #1-System Turret)

100mm （±50mm）

TurretHigh speed and high accuracy lead to high efficiency!

*) 回転工具の出力線図は、　P.14 をご参照ください。

OptionalTool Spindle Motor ： 11kW




Turning Tool

Rotary Tool

Tool Holder System for 15-Station Turret#1-System Turret (upper)

#2-System Turret (lower)

Tooling System

Rotary Tool

Turning Tool

CoroTurn RC

CoroTurn HPMax.80 bar

Side Milling cutter, Shoulder Milling cutter,Face Milling cutter

Adaptor for Face Mill

Collet

Collet

Collet

Tap collet

Tap

Tap with coolant hole

CoroDrill 870

CoroDrill 880

CoroMill 490Shoulder cutter

CoroMill 390Endmill & cutter

CoroMill 690Long edge cutter

CoroMill 590 cutter

CoroMill 316Endmill

Coro Chuck 930

ER Collet Chuck Adaptor

Milling Chuck Adaptor

Tap Adaptor

Adaptor for Drills（ISO Shank）

ＣoroDrill 880(with Coromant Capto)

Pencil Type

391.14

HD

Cutting unit for external, panting and grooving

CoroCut 1・2

CoroThread 266

CoroPlex MT

CoroTurn SL Boring Bars

CoroTurn SL ExchangeableCutting Head

CoroTurn SL Dampened Boring Bars

Boring Adaptor

Adaptors for shank tool

Square shank tool

CylindricalSleeve

Boring Bar

CoroPlexCoroTurn RC, 107, TR

CoroTurn for I.D.T-Max P

CoroThread 266

T-Max Q-Cut CoroTurn SL

CoroTurn TRHP

CoroTurn 107

CoroDrill 860, Delta-C

CoroMill Plura

Tool Spindle(More Dtail : Please Consult to SANDVIK)Tooling System SANDVIK CAPTO C6

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 1817 Tooling SystemTooling System

Supporting Programming

Reducing a lead time:Inclined drilling and milling combined machining can be programmed easily using the interactive function.

Inclined drilling can't be programed on TMM-250M1.

TAKISAWA

Original

Software

Utilizing G code knowledge, creates a program of complicated processes.

Takisawa original software 　　　　completely supports the Input　Confirmation　Operation

Easy Programming by Dialogue Conversation

Tiwap-1 is based on Process Registrat ion type

Programming involving step by step Process

▲

NC Program Edit Screen

① NC program*1 can be called (set) in the interactive (Tiwap-1) program.

② NC program*2 converted into NC statements by interactive operation (Tiwap-1) can be called (set) in the NC program edited manually.

*1: File name to which NC programs edited manually or created by CAD/CAM have been registered.

Further, Tiwap-1 enables the interactive program to perform

machining in cooperation with an NC program*1.

Machining Simulation

Cutting Detail wil l be Simulated by "3D Animated

Cartoon" or "Tool Trace display"

Automatic Operation

Interactive programs can run directly on the Tiwap-1

screen without converting into NC programs.

▲

Interactive Program Edit Screen

Cooperation

Input

Confirmation

Operation

By "Reliable Guide Function" Process Tag will be made automaticallyProcess can be completed by just setting processing data to the "Tag" which automatically made through.

Takisawa's original "Process fold /unfold function" and lucid icons improve visibility. Operator-friendly and easy to see screen is realized.The main screen is operator-friendly, because machining programs are displayed not only in "single system display" but also in "both system display".

◇ Single System Display = The program of the selected system is displayed.◇ Both System Display = The programs of the both systems are displayed.When the same synchronization numbers appear in both systems, they are displayed on the same line (indicating synchronization). Therefore, you can understand the flow of a whole program between the systems at one view.

During preparing Program, "Reliable Guide Function" provides good support.

It is easy for beginners to use interactive data inputting with guiding Figures & Icons.Symbolic soft key on the exclusive window helps inputting complicated arbitrary shapes.

“Reliable Guide Function”

The tag will be arranged in the optimum order automatically by interacting with the machine and selecting the required program.

Tag

Easy to See

Easy to Use

}

Unfold

Fold

#1-System

#1-System #2-System

Single System Display

Both System Display

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 2019 Tiwap-1Tiwap-1

#2-System Turret

120Max. Turning Dia. φ500

Max. Swivel Dia. φ

780

180

X1-Axis

Stroke

560 22

”

10.2”

5.1”5.1”

X1-Axis

Ref. Poin

t 525

Y-Axis Stroke 260

+130-130

Max

. Tur

ning

Dia

. φ35

0

322

Max. Tool

Length 2

80

Max. Swivel Dia. φ720

203

348

75°

30°

（T2）Too

l Spin

dle

（T1）

For the tool spindle motor 15/11kW type, the Y-axis travel is 260 (+140, -120)mm

Spindle Center

X2-Axis Stroke228

X2-Axis Ref. Point21090

（BB-Holder Height）230

90

B-Axis Guiding Center

Notes 1) The direction of Y-axis + is a prohibition area within 1st reference point of Z1 axis to +175mm.

(Interference with cover)

9”

8.3”

Z1-Axis Stroke 1300

35062.5

A-Axis Stroke 1300

Z2-Axis Stroke 1260

A-Axis Ref. Point 1630

Z2-Axis No.2 Ref. Point 650

X2-A

xis R

ef. P

oint

210

X2-A

xis

Str

oke

228


(900) (80)

90

32 100

Max.125 100 Max.125

48 737 551 43 87 17(15)

Z1-Axis ATC Position 170 6.7”

51.2”

51.2”

64.2”

11.4”

49.6”

25.6”

X1-A

xis

ATC

Posi

tion 5

25

X1-A

xis

Ref. P

oin

t 525

22”

22”

9”

9”

20.6

7”

20.6

7”

8.3

”8.3

”

X1-A

xis

Str

oke

560

203

551

25°

180°

25°

Max. R483R277.1

67

230

90

30

Spl

ash G

uar

d

BB-M250BH-M210

G.L

.

G.L

.

G.L.

Z1-Axis No.1 Ref. Point 1470 57.9”

#1-System HeadstockA2-8

（SP1）

#2-System Turret（T2）

#2-System HeadstockA2-6

（SP2）

Notes 1) The direction of Y-axis + is prohibition in this area (Z1-axis) (Interference with cover)

175470(*1)

Notes 2) B-axis move to ATC position is forbidden in this Z1 area (Interference with the shutter)

Tool Spindle（T1）

Power Source Regeneration SystemTo return regeneration energy generated during deceleration of the power

consumption reduction motor to the power source.

Control Panel Cooling SystemDesigned to reduce electric power using the natural heat release system.

TAKISAWA Oil-Water Separating UnitThe floating oil recovery unit, which recovers oil from machine coolant

without using power and producing new waste, is equipped as standard.

Hybrid Hydraulic UnitThe hybrid hydraulic unit excellent in energy saving is equipped as standard.

TMM-250 M3

Interference and Travel Range

Tool Spindle

Tool Storage Capacity ：

30/60/90pic (Drum Type Magazine),

CAPTO C6

Environmental Performance

Unit ： mm inch

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 2221 Interferenc and Travel Range

Spindle Center

180

120

230 23090（BB-Holder Height）（BB-Holder Height）

X1-Axis Ref. Point210

X2-Axis Ref. Point210 90

120X1-Axis Stroke 265 10.4”

9”

8.3”8.3”



Max. T

urning Dia. φ

35045

°

Y’-A

xis S

troke

70.770

.7X2-Axis Stroke 228

180

Y-A

xis

Str

oke

+50

5.5

54.4

9060.5

-50

2”

2”

2”

2”

35

85

120

X1-A

xis

Ref.

Poin

t 21

08.3

”

8.3

”

9”

10.4

”X1

-Axi

s St

roke

265

90

230

35

85 12

0

90 G.L

.

G.L

.

230

X2-A

xis

Stro

ke 2

28




21.6”

30”

31.5”

44.5”

25.6”

30”


894 87 17100

BB-M250BH-M210

32A-Axis Stroke 800

Z1-Axis Stroke 760

(360)

Z2-Axis No.1 Ref. Point 290 Z2-Axis Stroke 760

(400)

(80)

X2-A

xis

Ref.

Poin

t 21

0

#1-System Headstock

A2-8

（SP1）

#2-System Headstock

A2-6

（SP2）

#2-System Turret

（T2）

#1-System Turret

（T1）

Max.125 100 Max.125

Max.125 100

90

Max.125

#1-System Turret （T1） #1-System Turret （T1）

Standard L8 Type

#2-System Turret （T2） #2-System Turret （T2）

TMM-250 M1General Turning Tool

Spindle Center

230 23090（BB-Holder Height）（BB-Holder Height）

X1-Axis Ref. Point 210 8.3” 8.3”

9”

10.4”

X2-Axis Ref. Point210 90

170

130130

X1-Axis Stroke 265X2-Axis Stroke 228

170

5.5

54.4

60.5



90

Y-A

xis

Str

oke

Max

.20

+50

2”

2”

2”

2”-5

0 45°

Y’-A

xis S

troke

70.7

Max. T

urning Dia. φ

350

70.7

95

130

35

95 13

035


21.6”

30”

44.5”

30”

25.6”

11.4”

31.5”


Z1-Axis Stroke 760

X1-A

xis

Ref.

Poin

t21

0

X1-A

xis

Stro

ke 2

65

90

8.3

”

8.3

”

9” 10

.4”

230

(360)

#1-System Turret

（T1）

Max.125 100

90

Max.125

G.L

.

G.L

.



Z2-Axis Stroke 760 (80)

(400)

#2-System Turret

（T2）

Z2-Axis No.1 Ref. Point 290Max.125 100 Max.125

#1-System Headstock

A2-8

（SP1）

#2-System Headstock

A2-6

（SP2）894 8710032A-Axis Stroke 800

90

230

BB-M250BH-M210

17X2-A

xis

Str

oke

228

X2-A

xis

Ref.

Poin

t 21

0

TMM-250 M1Milling Tool

Interference and Travel Range Unit ： mm inch

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 2423 Interferenc and Travel Range Interferenc and Travel Range

*1 : C6 is the tool format of SANDVIK and it is used for the tool spindle as standard type (drum magazine type).

*2 : VDI is the DIN quick change tool format and it is used for the turret as standard type.

*3 : 7360 × 3586 mm in use of 60-tool drum magazine type.

*4 : Long drill maximum length (magazine storable length) in use of drum magazine type. Note: As the limitation is applied when using

this, please make an inquiry to our sales person.

*5 : 260 （+140,-120)mm for the tool spindle motor 15/11kW type.

*6 : Permissible pressure for the coolant unit of the standard machine is 3Mpa. If the coolant exceeding this value is required, it is

estimated additionally.

In general, if high pressure coolant pump is used, appropriate coolant controller must be used together. Using high pressure coolant

pump without installing the coolant controller allows the coolant temperature to rise extremely, thus reducing the machine precision.

Machine Specifications

TMM-250 Module-3 TMM-250 Module-1

Machine Composition

Tool Spindle ● -

#1-System Spindle (Upper) - ●

#2-System Spindle (Lower) ● ●

Capability・

Capacity

Max. Swing mm inch 780 30.71" 780 30.71"

Std. Turning Diameter / Max. Turning Diameter (Tool Spindle)

mm inch 220/350 (500) 8.66"/13.78"(16.69") 220/350 8.66"/13.78"

Max. Turning Length mm inch 1300/300 (Flange) 51.18/11.81" 800/200 (Flange) 31.5"/7.87"

Distance Between Spindles mm inch 1630 64.17" 1130 44.49"

Bar Capacity (#1/#2-System Headstock) mm inch 76.2/50.8 3"/2" 76.2/50.8 3"/2"

Travel

X1-Axis Travel (Tool Spindle, #1-System Headstock) mm inch 560 22" 265 10.4"

Y-Axis Travel (Tool Spindle, #1-System Headstock) mm inch 260 (±130) 10.2"(±5.1") *5 100 (±50) 4" (±2")

Z1-Axis Travel (Tool Spindle, #1-System Headstock) mm inch 1300 51.2" 760 30"

B-Axis Swivel Range (Tool Spindle) deg. 230 -

A-Axis Travel (#2-System Headstock) mm inch 1300 51.2" 800 31.5"

X2-Axis Travel (#2-System Turret) mm inch 228 9" 228 9"

Z2-Axis Travel (#2-System Turret) mm inch 1260 49.6" 760 30"

Spindle

Number of Spindles 2 2

Spindle Speed (#1/#2-System Headstock) min-1 4000 4000

Min. Index Angle (Cs-Axis) deg. 0.001 0.001

Spindle Nose (#1/#2-System Headstock) JISA2-8/A2-6 JISA2-8/A2-6

Through-Hole Diameter (#1/#2-System Headstock) mm inch 86/63 3.39"/2.48" 86/63 3.39"/2.48"

Bearing Inside Diameter (#1/#2-System Headstock) mm inch 120/100 4.72"/3.94" 120/100 4.72"/3.94"

Tool Spindle

Type of Turret ATC -

Number of Attachable Tools 1 -

Tool Shank / Boring Bar Shank mm inch 25/40 1"/1.5" -

Tool Spindle Max. Speed min-1 8000, 12000 -

Type of Tool Shank C6 *1 -

Tool Storage Capacity 30, 60, 90 -

Max. Tool Diameter (with Adjacent Tool) mm inch φ120 (φ105) 4.72" (4.13") -

Max. Tool Length mm inch 280, 400 *4 11.02", 15.75" -

Max. Tool Weight kg lbs 6 13.2 -

Tool Selection System Bidirectional -

#1/#2 Turret

Number of Turrets 1 （#2） 2

Type of Turret VDI (φ40) *2 VDI (φ40) *2

Number of Attachable Tools 15 15/15

Height of Square Tool Shank mm inch 25 1" 25 1"

Diameter of Boring Bar Shank mm inch 40 1.5" 40 1.5"

Number of Rotary Tools 15 15/15

Max. Rotarign Speed min-1 4000 4000

Max. Tool Shank Diameter mm inch 20 0.75" 20 0.75"

Taper Hole in Tool Shaft (Form, Number) AR32 AR32

Bearing Inside Diameter of Tool Shaft mm inch 35 1.38" 35 1.38"

Feedrate

Rapid Traverse Rate (#1-System Turret, Tool Spindle)m/min

ipmX:30/Z:40/Y:20

X:1181.1"/Z:1574.8"/Y:787.4"X:24/Z:30/Y:12

X:1574.8"/Z:1181.1"/Y:472.44"

Rapid Traverse Rate (#2-System Turret)m/min

ipmX:24/Z:30

X:1574.8"/Z:1181.1"X:24/Z:30

X:1574.8"/Z:1181.1"

Rapid Traverse Rate (#1/#2-System Headstock)min-1 C:300 C:300

m/min ipm A:30 1181.1" （#2） A:30 1181.1" （#2）

Jog Feedrate mm/min ipm X, Z, Y:0 ～ 1260 49.61" X, Z, Y:0 ～ 1260 49.61"

Motors

Spindle Motor (30 min/cont.)kW HP

22/15(#1), 18.5/11(#2) 29.3/20(#1), 24.7/14.7(#2)

22/15(#1), 18.5/11(#2) 29.3/20(#1), 24.7/14.7(#2)

Tool Spindle Motor (30 min/cont.) kW HP 11/7.5, 15/11 14.7/10, 20/14.7 -

Rotary Tool Motor (30 min/cont.) kW HP 5.5/3.7 7.3/4.9 5.5/3.7 7.3/4.9

Feed Axis MotorkW HP

X1:2.5、 X2:1.8、 Y:1.2、 Z1, Z2, A:2.5 X1:3.3、 X2:2.4、 Y:1.6、 Z1, Z2, A3.3

X1:1.8、 X2:1.8、 Y:1.2、 Z1, Z2, A:2.5 X1:2.4、 X2:2.4、 Y:1.6、 Z1, Z2, A:3.3

Hydraulic Pump Motor kW HP 2.8 3.7 1.5 2

Coolant Pump MotorkW HP

0.9/1.53(50Hz/60Hz)×2+0.4×3 1.2/2(50Hz/60Hz)×2+0.5×3

0.4×4 0.5×4

Required Power

Electric Power (Standard) kVA 64 62

Air Pressure Source Mpa 0.4 0.4

Tank Capacity

Hydraulic Unit Tank L gal 10 2.64 10 2.64

Lubricant Tank L gal 6.5 1.72 6.5 1.72

Coolant Tank L gal 480 126.72 360 95.04

Oil Control L gal 190 50.16 190 50.16

Machine Size

Machine Height mm inch 3050 120.08" 2250 88.58"

Floor to Spindle Center Height mm inch 1220 48.03" 1220 48.03"

Required Floor Spacemm×mm

inch×inch6910×3586 *3

272.05"×141.74"4745×2932

186.81"×115.43"

Machine Weight kg lbs 10000 22000 8500 18700

Red is Optional. － : None

TMM-250 Module-3 TMM-250 Module-1#1-System #2-System #1-System #2-System

Spindle Motor 22/15kW 18.5/11kW 22/15kW 18.5/11kW

Chuck * ○ ○ ○ ○

Chuck Plate ● ● ● ●

Cylinder * ● ● ● ●

C-Axis Disc Brake ● ● ● ●

Chuck Open/Close M-Function ● ● ● ●

Airblow ○ ● ○ ●

Spindle Above Coolant, Slideway Coolant

● ●

Spindle Cooling Unit ● ●

Tool Spindle (with B-Axis) ● - - -

15-Station Milling Turret (T15M) VDI - ○ ● ●

15-Station Turret (T15) VDI - ● ○ ○

Y-Axis Function ● - ● -

Coolant Cooling Unit ○ ○

Hybrid Hydraulic Unit ● ●

Automatic Lubrication Unit ● ●

CE, Safety Specification ○ ○

Trans ○ ○

● : Standard ○ : Optional　－ : None

*) Please refer to "Hydraulic Chuck System" of 11 page.

M1M3

Machine Composition

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 2625 Machine SpecificationsMachine Specifications

Chip Conveyor

Self-Aligning Hydraulic Steady Rest (Mounted on #2-System Turret)

Self-Aligning Hydraulic Steady Rest (Programmable)

Items TMM-250 M3 TMM-250 M1《Spindle》

Chuck (#1/#2-System) ○ ○

Spindle Orientation (Pin Lock Type, Disk Brake Type) ○ ○

Outside Spindle Airblow (with M-Function) ○ ○

Seating Control ○ ○

Spindle Through Airblow (with M-Function) ○ ○

Spindle Through Coolant (with M-Function) ○ ○

Spindle Inner Stopper ○ ○

《Tailstock》

Program Type Tailstock ○ -

Rolling Center ○ -

Built-in Tailstock ○ -

《Turret》

Tool Spindle Motor (15kW) ○ -

High Pressure Coolant Pump Unit ○ -

Milling Collet ○ ○

Boring Bar Bush ○ ○

U-Drill Socket ○ ○

Drill Socket ○ ○

Work Pusher ○ ○

Work Stopper ○ ○

Coolant Cooling Unit ○ ○

OD Tool Holder ○ ○

Double OD Tool Holder ○ ○

Facing Holder ○ ○

OD Turning & End Facing 3-Way Square Holder ○ ○

Cut-Off Holder ○ ○

Boring Bar / Drill Holder ○ ○

Double Boring Bar / Drill Holder ○ ○

U-Drill Holder ○ ○

Rotary Tool Holder （X-Axis） ○ ○

Rotary Tool Holder （Z-Axis） ○ ○

Touch Sensor ○ ○

《Others》

Total Counter ○ ○

Preset Counter ○ ○

Multi Tool Counter ○ ○

Signal Tower Light (Various Types) ○ ○

Powered Door (Left Open, Two-Hands Starting) ○ ○

Auto Door (Left Open for Robot) ○ ○

Tool Setter ○ ○

High Pressure Coolant Pump *6 ○ ○

Various Parts Catcher ○ ○

Parts Conveyor ○ ○

Overhead Loader ○ ○

Work Feeder ○ ○

Door & Cover for Overhead Loader ○ ○

Energy-Saving Circuit for Hydraulic Unit ○ ○

Line Filter for Hydraulic Unit ○ ○

Circuit Breaker ○ ○

Lighting Apparatus (10W) ○ ○

100V Outlet ○ ○

Auto Power-Off System ○ ○

Robot Interface ○ ○

User Special Color ○ ○

Reserve M-Function ○ ○

Chip Conveyor (Caterpillar Type) ○ ○

Chip Conveyor Interface ○ ○

Chip Bucket ○ ○

Oil Controller ○ ○

Self-Aligning Steady Rest ○ ○

○ : Optional － : None

Machine Optional Accessories Machine Dimensions　Unit ： mm inch

Drum Magazine Type : 30/60/90 Tools

【Tool Shank】 CAPT C6

Standard　…30 Tools (C6)

Optional　 …60/90 Tools

4475

6050/6500/6960 (TOOL 30/60/90)

756 2213.6

1220

775

3050

120.0

8”

2300

1700

1190

1360

2122

669.4

1415

1101.1

1170/1620/2080

(TOOL 30/60/90)46.06”/63.78”/81.89”

600

1050

840

1990

3586

78.3

5”

141.1

8”

985

84.0

3”

90.5

5”

38.7

8”

1265176.18”

238.19”/255.91”/274.02”

29.76” 87.15”

30.51”

49.80”

6910/7360/7820 272.05”/289.76”/307.87”

(TOOL 30/60/90)

26.3

4”

83.5

4”

66.93” 53.54” 55.71” 41.50”

23.62”

43.3

5”

33.0

7”

46.85”

1070

4673 312

33313.11”

2214

7753395

3800

1278

1110 1215 (1080)

640

1220

48.0

3”

2250

720 28.35” 657.1

840

600

42.13”

183.98” 12.28” 87.17”

30.51”133.66”

149.61”

50.31”

43.70” 47.84” (42.52”)

23.62”

985

2932

25.2

0”

88.5

8”

25.8

7”

33.0

7”

38.7

8”

115.4

3”

L13 Type (Special)

Oil Skimmer

333

529320.9

849.9

976

1310447576.4

5861.4

755.6

2320

2250

1220

1170

14151610

1186

1450

639.4

2140

2320

1075

875

1350

275

600

3100

840 Coolant Oil Controller

4880

55.71”

46.6

9”

25.1

6” 23.3

2”

10.8

3”53.1

5”

112.0

5”

34.4

5”

74.2

5”

91.3

4”

46.06”

63.39”57.09” 42.32”

33.07”

38.4

3”

51.57”176.18”

230.76”

192.13”

3”

88.5

8”

13.11”

20.83”12.63”

33.46”91.7”

29.75”

48.0

3”

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 28The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.27 Machine DimensionsMachine Optional Accessories

*1) I/O addition and the PC change are necessary. *2) 0.001mm、 0.0001inch、 0.001deg*3) IS-C 0.0001mm 0.0001deg(C-Axis is 0.001deg) 0.00001inch*4) Addition of switch is required.*5) Not coexistent with chuck tailstock barrier.*6) Not coexistent with Stored Stroke Check 2, 3.*7) Required when RAKU-RAKU Monitor 3 is used.*8) DNC run mode transfer switch is required.*9) CF card and adaptor is required.*10) AI contour control I or II is required.*11) Used for touch sensor, etc.*12) AI contour control is required.*13) Cannot be used when Tiwap-1.*14) Not coexistent with chamfering/corner R.*15) Not coexistent with drawing dimension direct input.*16) Angle Holder is required.*17) Included in tilted working plane command with guidance.*18) Included in smooth TCP.*19) Included in high-speed smooth TCP.*19) Tool setter is required.*20) Cannot be used when RAKU-RAKU Monitor 3 is installed.*22) Used for AI contour control function.*22) Cannot be simultaneous display the other languages.*23) German, French, Spanish, Italian, Chinese (traditional), Chinese (simplified), Korean,

Portuguese, Dutch, Danish, Swedish, Hungarian, Czech, Polish, Russian, Turkish*25) Hardware option is required.

Specifications･Contents

31i-B （Std.） 31i-B5

M1 M3M3

Simultaneous 5 Axes

Drawing Dimension Direct Input *14 ○ ○ ○

G-Code System A ● ● ●

G-Code System B/C *13 ○ ○ ○

Chamfering/Corner R Programming *15 ● ● ●

Programmable Data Input (G10) ● ● ●

Sub Program Call (10 Levels) ● ● ●

Custom Macro ● ● ●

Additional Custom Macro Common Variables ● ● ●

Single Canned Cycle ● ● ●

Combined Canned Cycle ● ● ●

Combined Canned Cycle Ⅱ ● ● ●

Drilling Canned Cycle ● ● ●

Arc Radius Programming ● ● ●

Auto Corner Override ○ ○ ●

3D Coordinate Conversion ○ *16 ● ●

Tilted Working Plane Command *17 - ○ ○

Tilted Working Plane Command with Guidance - ○ ○

Workpiece Coordinate System Shift ● ● ●

Workpiece Coordinate System Shift Direct Input ● ● ●

Inclusion Macro ○ ○ ○

Real Time Custom Macro ○ ○ ○

Program Coordinate System Switching Function ● ● ●

【Miscellaneous Functions/Spindle Functions】M Function (M3 Digits) ● ● ●

Synchronization ● ● ●

Miscellaneous Functions Instructions (3 Pieces) ● ● ●

Spindle Functions (S Function) ● ● ●

Constant Surface Speed Control ● ● ●

Spindle Override ● ● ●

Spindle Orientation ● ● ●

Synchronous Spindle Control ● ● ●

Rigid Tap (Spindle Center) ● ● ●

Rigid Tap (Rotary Tool) ● ● ●

【Tool Functions/Tool Offset Functions】T Function ● ● ●

Tool Offsets, 64 Pieces ● - -

Tool Offsets, 99 Pieces ○ - -

Tool Offsets, 200 Pieces ○ - -

Tool Offsets, 400 Pieces ○ ● ●

Tool Offsets, 499 Pieces ○ ○ ○



Tool Position Offset ● ● ●

Tool Center Point Control *18 - ○ ●

Smooth TCP *19 - ○ ○

High-Speed Smooth TCP *10 - - ○

Tool Posture Control *19 - - ○

Y-Axis Offset ● ● ●

Tool Diameter/Nose R Compensation ● ● ●

Tool Geometry/Wear Compensation ● ● ●

Tool Offset Counter Input ● ● ●

Tool Offset Measured Value Direct Input ● ● ●

Tool Offset Measured Value Direct Input B *20 ● ● ●

3D Tool Radius Compensation - ◎ ●

Tool Life Management *21 ○ ○ ○

Tool Offset Memory Switching Function ● ● ●

【Accuracy Offset Functions】Backlash Compensation ▲ ▲ ▲

Backlash Compensation by Rapid Traverse / Feedrate

▲ ▲ ▲

Smooth Backlash Compensation ▲ ▲ ▲

Stored Pitch Error Compensation ◎ ● ●

Interpolation Pitch Error Compensation　 ◎ ● ●

Bidirectional Pitch Error Compensation　 ◎ ● ●

【Editing】Part Program Memory Capacity 2Mbyte ● ● ●

Part Program Memory Capacity 4Mbyte ○ ○ ○

Part Program Memory Capacity 8Mbyte ○ ○ ○

Registrable Programs, 4000 Programs ● ● ●

Program Editing ● ● ●

Program Protection ● ● ●

Extended Program Editing ● ● ●

Playback ◎ ◎ ◎


31i-B （Std.） 31i-B5

M1 M3M3

Simultaneous 5 Axes

Machining Time Stamp ○ ○ ○

Background Editing ● ● ●

Multiple-Programs Simultaneous Editing ● ● ●

【Setting/Display】Status Display ● ● ●

Clock Function ● ● ●

Current Position Display ● ● ●

Program Comment Display (31 Characters) ● ● ●

Parameter Setting and Display ● ● ●

Alarm Display ● ● ●

Alarm Log Display ● ● ●

Operation Log Display ▲ ▲ ▲

Run Hours and Parts Count Display ● ● ●

Actual Speed Display ● ● ●

Actual Spindle Speed and T Code Display ● ● ●

Servo Adjustment Screen ● ● ●

Spindle Adjustment Screen ● ● ●

Maintenance Information Screen ● ● ●

Software Operator's Panel ◎ ◎ ◎

Data Protection Key, 1 Kind ● ● ●

Screen Clear ● ● ●

Parameter Setup Support Screen ● ● ●

Processing Condition Choice Function *22 ○ ○ ○

Help Function ● ● ●

Self Diagnostic Function ● ● ●

Scheduled Maintenance Screen ● ● ●

Graphic Display ● ● ●

Auto Data Backup ● ● ●

Machine Operation Menu ● ● ●

【Display Languages】English *23 ● ● ●

Japanese (Kanji) *23 ▲ ▲ ▲

Other Language *23 *24 ○ ○ ○

Display Language Dynamic Switching ● ● ●

【Data I/O】

RS-232C Interface for 1ch ● ● ●

Fast Data Server ◎ ◎ ◎

Memory Card I/O ● ● ●

USB Memory I/O ● ● ●

Screen Hard Copy ▲ ▲ ▲

One-touch Macro Call ◎ ◎ ◎

【Communication Function】Inclusion Ethernet ● ● ●

Fast Ethernet *25 ◎ ◎ ◎

【Other】Touch Panel ○ ○ ○

● : Standard ○ : Optional ◎ : Special － : None ▲ :Parameter setting is required.(Note: Normally, the parameters need not to be changed. If the parameters are to be set or changed, understand completely the functions of such parameters. Wrong setting could cause the machine to be moved unexpectedly, resulting in machine or workpiece damage or personal injury.)

Specifications･Contents M1 M3【NC Unit】Number of Control Axes 4+4 5+4

Simultaneous Number of Control Axes 4+4● 4+4 ○ 5+4

【Operation Panel】Screen (15.0" Color LCD) ●

【Software】Tiwap-1 ●

RAKU-RAKU Monitor 3 ○

Measurement Monitor 3 *1 ◎

【Safety Devices】Front Door Interlock ●

Front Door Locking Mechanism ●

Safety Relay ●

Control Panel Breaker with Tripper ●


31i-B （Std.） 31i-B5

M1 M3M3

Simultaneous 5 Axes

【Controlled Axes】Least Input Increment *2 ● ● ●

Maximum Programmable Dimension (±999999.999) ● ● ●

Cs Contour Control ● ● ●

Synchronization/Blend Control ● ● ●

Least Input Increment C *3 ○ ○ ○

Inch/Metric Selection ● ● ●

Interlock ● ● ●

Machine Lock ○ ○ ○

Emergency Stop ● ● ●

Stored Stroke Check 1 ● ● ●

Stored Stroke Check 2, 3 *5 ○ ○ ○

Stroke Limit Check Before Movement ○ ○ ○

Chuck and Tail Stock Barrier *6 ○ ○ ○

Mirror Image (Each Axis) ▲ ▲ ▲

Chamfering ON/OFF ● ● ●

Overload Detection *7 ○ ○ ○

Position Switch ◎ ● ●

【Operation】Auto Run (Memory) ● ● ●

MDI Run ● ● ●

DNC Run *8 ○ ○ ○

DNC Run with Memory Card *8 *9 ○ ○ ○

Program Number Search ● ● ●

Sequence Number Search ● ● ●

Sequence Number Collation and Stop ○ ○ ○

Program Restart ◎ ◎ ◎

Manual Interrupt･Restore ○ ○ ○

Wrong Operation Preventive ● ● ●

Rigid Tap Return ● ● ●

Buffer Register ● ● ●

Dry Run ● ● ●


31i-B （Std.） 31i-B5

M1 M3M3

Simultaneous 5 Axes

Single Block ● ● ●

Jog Feed ● ● ●

Manual Reference Point Return ● ● ●

Dogless Reference Point Setting ● ● ●

Manual Handle Feed, 1 Unit ● ● ●

3D Manual Feed - ◎ ●

Manual Handle Retracing Function ◎ ◎ ◎

【Interpolating Functions】Nano Interpolation ● ● ●

Positioning (G00) ● ● ●

Linear Interpolation (G01) ● ● ●

Circular Interpolation (G02/03) ● ● ●

Dwell (G04) ● ● ●

Polar Coordinate Interpolation ● ● ●

Cylindrical Interpolation ● ● ●

Helical Interpolation ● ● ●

Smooth Interpolation *10 ○ ○ ●

Thread Cutting, Synchronous Cutting ● ● ●

Multiple Thread Cutting ● ● ●

Thread Cutting Cycle and Retraction ● ● ●

Continuous Thread Cutting ● ● ●

Variable Lead Thread Cutting ○ ○ ○

Circular Threading ○ ○ ○

Polygon Machining Between Spindles ○ ○ ○

Skip (G31) *11 ◎ ◎ ◎

Torque Limit Skip ● ● ●

Reference Point Return (G28) ● ● ●

2nd Reference Point Return (G30) ● ● ●

3rd, 4th Reference Point Return ◎ ● ●

NURBS Interpolation - - ○

3D Circular Interpolation - - ○

Balance Cut ● ● ●

【Feed Functions】Rapid Traverse Override (F0,25%,50%,100%) ● ● ●

Feed per Minute ● ● ●

Feed per Revolution ● ● ●

Constant Tangential Speed Control ● ● ●

Cutting Feedrate Clamp ● ● ●

Automatic Acceleration/Deceleration ● ● ●

Rapid Traverse Bell-Shaped Accel/Decel ● ● ●

Bell-Shaped Accel/Decel After Feedrate Interpolation

○ ○ ●

Linear Accel/Decel After Feedrate Interpolation

◎ ◎ ●

Feedrate Override (15 Steps) ● ● ●

Jog Override (15 Steps) ● ● ●

Override Cancel ● ● ●

Manual Feed per Revolution ▲ ▲ ▲

AI Contour Control II ○ ○ ●

Bell-Shaped Acceleration & Deceleration Before Look-Ahead Interpolation

○ ○ ●

Jerk Control *12 ○ ○ ○

【Program Input】Program Code ● ● ●

Label Skip ● ● ●

Parity Check ● ● ●

Control In/Out ● ● ●

Optional Block Skip, 1 Piece ● ● ●

Optional Block Skip (2 to 9 Pieces) ◎ ◎ ◎

Program Number O4 Digits ● ● ●

Program File Name 32 Characters ● ● ●

Sequence Number N8 Digits ● ● ●

Absolute/Incremental Command ● ● ●

Decimal Point Input/Pocket Calculator Type Decimal Point Input

● ● ●

Diameter/Radius Programming ● ● ●

Plane Selection G17,G18,G19 ● ● ●

Rotary Axis Designation ● ● ●

Rotary Axis Rollover ● ● ●

Coordinate System Setting (G50) *13 ● ● ●

Auto Coordinate System Setting ● ● ●

Workpiece Coordinate System ● ● ●

Workpiece Coordinate System Preset ● ● ●

Additional Work Piece Coordinate Systems (48 Sets) ○ ○ ○

TMM-Series

■ Composition

■ Main Function List

FANUC : 31i-B, 31i-B5

NC Unit Specifications

※ Please contact our sales persons for further information.

The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 3029 NC Unit SpecificationsNC Unit Specifications

TMM-Series

*The appearance, specifications, and relevant software of the product are subject to change for improvement without notice.

*Please make an inquiry to our sales representatives for details of the product.

TAKISAWA MACHINE TOOL CO., LTD.983 Natsukawa, Kita-ku, Okayama 701-0164, JAPANTelephone : (81)86-293-1500Fax : (81)86-293-5799Website : http://www.takisawa.co.jpE-mail : [email protected] (America)

[email protected] (Europe)[email protected] (Asia)

■ Overseas NetworkTHAILAND Takisawa (Thailand) Co.,Ltd.

Telephone : (66)2726-1530-2 Fax : (66)2726-1533

INDONESIA PT. Takisawa IndonesiaTelephone : (62)21-45852466 Fax : (62)21-45852467

INDIA SAP Takisawa Machine Tools Private Ltd.Takisawa Mchine Tool India Liaison OfficeTelephone : (91)80-26662386 Fax : (91)80-26662392

CHINA Takisawa (Shanghai) Co., Ltd.Telephone : (86)21-6235-0938 Fax : (86)21-6235-0905

USA Takisawa, Inc. Telephone : (1)847-419-0046 Fax : (1)847-419-0043

GERMANY Takisawa Machine Tool Germany Representative OfficeTelephone : (49)2056-2598-15 Fax : (49)2056-5994-79

Japanese laws prohibit this machine from being used to develop or manufacture “weapons of mass destruction” or “conventional arms”, as well as from being used to process parts for them.Export of the product may require the permission of governmental authorities of the country from where the product is exported.Should you wish to resell, transfer or export the product, please notify Takisawa Machine Tool Co., Ltd. or our distributor in advance.

NC516E1509MN1000C

(Head Office)

CM007ISO 14001 12ER-865

(Head Office)

ISO 9001 CertifiedJQA-2010

Multi-Tasking Machine TMM-Series - langdrehen.de · Process Integration Complete Machining...

Documents

Transcript of Multi-Tasking Machine TMM-Series - langdrehen.de · Process Integration Complete Machining...