8/3/2019 Mu0011 Both Set

1/20

Master of Business Administration

Name Jyotsana Dewangan

Roll Number 511038208Course MBA 3rd Semester

Subject Management and

Organizational Development

Subject code MU0011

Center code 3011

Assignment Set-1

1

8/3/2019 Mu0011 Both Set

2/20

Q.1) Explain the levels of Management.

Ans: Levels of Management refer to the segregation between the different managerial positions

in an organization. Depending on the size of the business and the size of work force the number

of levels of management increases or decreases. Levels of management decide the chain of

command, the amount of authority & responsibility assigned. There are three broad categories:

1. Top level / Administrative level

Middle level / Executive

2. Low level / Supervisory / Operative / First-line managers

We will refer to low level management as junior management.

Fig. Levels of Management

1 Top Management

The top management would consist of the board of directors, CEO (Chief Executive Officer) and

or the MD (Managing Director). The top management is the highest authority of the

organization. The top level management sets goals and policies. As a thinking body, it devotesmore time on planning and coordinating functions. Top management is responsible for:

Decides the vision, mission, goals and objectives apart from policies Provides guidelines and schedules for department budget preparation.

Facilitates strategic plan & policy development.

Appoints leadership team members.

Ensures all departments work well with each other.

Continuously keeps a check through teams on the external environment and its impact onthe business. Ensures necessary corrective and preventive action is taken in time.

Provides guidance and direction.

2

http://resources.smude.edu.in/slm/wp-content/uploads/2010/08/clip-image0061.gif

8/3/2019 Mu0011 Both Set

3/20

Top management is responsible to all shareholders for the performance of the

organization.

2 Middle Management

Branch managers and departmental managers form the middle management. They report to thetop management. They spend more time on organizational and directional functions. Depending

on the organization size, the existence and the no. of layers of middle management are decided.

Middle management is responsible for:

Executing organizational plans as per the policies and directives of the top management

Planning for the sub-units of the organization

Employing & training of junior management

Interpreting and explaining policies

Coordinating the activities within the division or department.

Reporting to top management

Performance evaluation of junior managers

Inspiring junior managers to perform better.

3 Lower Management or Junior Management

Lower level is also known as junior management, supervisory / operative level of management.

It consists of supervisors, foreman, section officers, superintendent etc. According to R.C. Davis,Supervisory management refers to those executives whose work has to be largely with personal

oversight and direction of operative employees. In other words, they are concerned with

direction and controlling function of management. Their activities include:

Assigning tasks

Guiding and instructing workers for day-to-day activities

Ensuring quality and quantity of production as per targets

Maintaining good relations with colleagues

Communicating worker issues, suggestions and recommendations to top management

Communicating goals and objectives set by middle and top management

Solve employee grievances, supervising & guiding team members

Training colleagues and team members, motivating employees

Arranging necessary resources (materials, machines, tools etc.) for getting the job done.

Preparing reports about employee performance

Ensuring discipline amongst team and colleagues

Q.2) Discuss the genesis of Organizational Development

3

8/3/2019 Mu0011 Both Set

4/20

Ans: The history of organization development will help to clarify the genesis and the evolution

of this term organization development. It would also enable to clarify some of the issues or

confusions that have surrounded OD.

Between 1950 and 2000 lot research work by eminent researchers has led to the development of

organization development. There are 5 key inputs that have contributed to the genesis anddevelopment of OD. They are:

Laboratory Training

Action Research/Survey Framework

Normative Approaches

Quality of Work Life

Strategic Change

1. The first was the growth of the National Training Laboratories (NTL) and the training groups,

which were also known as sensitivity training or T-groups.

2. The second was the classic work on action research that had been conducted by the socialscientists. These social scientists were interested in applying research to manage change. Kurt

Lewin was the person who instrumental in the development of action research and hence OD.

We all have realized that change is the only constant. The only way to move forward positivelyis to learn to manage change. If there is a scientific way to manage change, then it should be

leveraged, hence the development of OD.

3. The third was the normative view of organization development. Essentially saying that there is

only one best way to design and operate organizations.

4. The fourth input was the approach focusing on productivity and the quality of work life.

5. The fifth input was the development of strategic change and organization transformation.

Let us understand each one of these a little bit more in detail.

1 Laboratory Training Background

Laboratory training or the T-group is a small, unstructured group in which the participants learn

from each other. They learn from their own interactions. They learn from the evolving dynamics

about issues such as interpersonal relations, personal growth, leadership and group dynamics.

Essentially during the event the participants were provided feedback in private, but participants

requested to be allowed to listen into the feedback being offered to others. Reluctantly the

facilitators agreed. The experiment paid off with many potential benefits.

1. Feedback about group interaction was a rich learning experience

4

8/3/2019 Mu0011 Both Set

5/20

2. Process of group building had potential for learning that could be transferred to real life

situations.

2 Action Research and Survey Feedback Background

During the research in 1940 it was learnt that research needed to be closely linked to action iforganization members were to use it to manage change. A joint effort by organization members

and social scientists was undertaken to collect data, analyze it and to devise and implement

solutions. The result of action research was: members of organizations were able to use researchon themselves to guide action and change; and social scientists were able to study the process to

derive new knowledge that could be used elsewhere.

3 Normative Background

Primarily the belief here is that, there is one best way of managing organizations. Usually

managements are either exploitative and authoritative; or benevolent and authoritative; or

consultative; or participative group based. Organizations are such because their systems aredesigned in such a manner. Survey and research proved that the participative group method

management is the best way of managing organizations.

4 Productivity and Quality of Work-Life (QWL) Background

The first phase in this was development of work designs aimed at better integrating technology

and people. Management unions got together to design work and the work designs created

provided discretion, task variety and feedback about results. Perhaps the most distinguishing partof QWL programs was the discovery of self-managing work groups as a form of work design.

These groups were composed of multi-skilled workers who were given the necessary autonomy

and information to design and manage their own task performances. This worked well in theUSA from 1950-1970 but as business evolved so did the competition. Organizations realized thatthe work practices in USA led to manufacturing of merchandise, but this merchandise was not

able to compete with the low cost, high quality merchandise from other countries like Japan.

Organizations realized that the systems used in Japan were different.

5 Strategic Change Background

Strategic change is focused on improving the alignment amongst organizations efforts. In other

words the organization should think and communicate the same messages. These messages

should be reinforced by appropriate actions. Here organizations chose to focus on businesses

where they had core competencies. They moved out of businesses where they did not have corecompetencies. The business acquired was to ensure that there was a strategic fit. The latest

example in India is the acquisition of a major stake in Reva Electric Car Company by the

Mahindra group. The Mahindra group has been into the automotive segment for decades andwanted the electric capability to build hybrid cars. This it would get from Reva and hence the

acquisition of a major stake.

6 The New Holistic Approach in Organization Development

5

8/3/2019 Mu0011 Both Set

6/20

In todays dynamic business world, most organizations experience change on continuous basis

and have come to a conclusion that change is a never ending process. As soon as one

organizational problem is rectified, another one presents itself. The cycle therefore goes ondespite the best efforts by the leaders and managers.

Q.3) Write a note on techno structural interventions.

Ans: These interventions focus on an organizations technology (for example, task methods and

job design) and structure (for example, division of labor and hierarchy). These change methodsare receiving increasing attention in OD, especially in light of current concerns about

productivity and organizational effectiveness. The following three techno-structural interventions

are concerned with restructuring organizations:

Structural Design

This change process concerns the organizations division of labor how to specialize task

performances. Interventions aimed at structural design include moving from more traditionalways of dividing the organizations overall work (such as functional, self-contained-unit, and

matrix structures) to more integrative and flexible forms (such as process-based and networkbased structures).

Downsizing

This intervention reduces costs and bureaucracy by decreasing the size of the organization

through personnel layouts, organization redesign and outsourcing. Each of these downsizingmethods must be planned with a clear understanding of the organizations strategy.

Reengineering

This recent intervention radically redesigns the organizations core work processes to create

tighter linkage and coordination among the different tasks. This work-flow integration results infaster, more responsive task performance. Reengineering is often accomplished with new

information technology that permits employees to control and coordinate work processes more

effectively. Reengineering often fails if it ignores basic principles and processes of OD.

Q4) Write a note on future trends in OD.

Ans: Let us list and illustrate the major OD trends in this topic. These trends are the means of

organizational challenges. Following are the OD trends:

Learning organization

Knowledge management

Organizational reengineering

Change management

6

8/3/2019 Mu0011 Both Set

7/20

I) Learning organization

Organizations should strive to learn constantly and enhance learning activities. Learning

organization is one that facilitates continuous learning and development of its employees. Thislearning enables organizations to survive in the competitive world. A learning organization has

five main features:

Systems thinking: This is a framework according to which business is considered as bounded

objects. System thinking is used to assess a companys performance using information systems.As per this theory all the features of a learning organization should be visible simultaneously.

Acquiring these features is a slow and steady process. They cannot be developed or acquired

simultaneously.

Personal mastery: The employees of learning organizations are committed to the learningprocess. This is called as personal mastery. Staff training and development facilitate the learning

process.

Mental models: These models refer to the assumptions of employees and organization regarding

various processes. These models differentiate between the processes employees follow and theprocess they are supposed to follow.

Shared vision: Employees of learning organizations have a shared vision. This provides the staff

energy and motivation required to learn.

Team learning: Organizations follow two types of staff learning: individual learning and teamlearning. Team learning motivates employees and helps them grow more quickly. Team learning

also facilitates the problem solving process.

II) Knowledge management

Knowledge management (KM) is a system that consists of various organizational strategies and

practices. Every organizational process and strategy comprises of knowledge. This knowledge isused to recognize, design, represent, and distribute these practices or strategies. KM efforts and

activities concentrate on organizational objectives. These objectives could be attaining

competitive advantage, shared vision, innovation, and improved performance. KM helps incontinuous improvement of an organization.

III) Organizational reengineering

Organizational reengineering is a process of redesigning the existing process, practices, and

strategies for improved results. Organizations reengineering is also an important trend in OD.

This redesigning process provides a competitive advantage to organizations in order to attain thesame organizational goals and objectives.

IV) Change management

7

8/3/2019 Mu0011 Both Set

8/20

Next important trend in OD is change management. Organizations undergo changes such as

strategic changes, technological changes, structural changes, and attitude and behavioral

changes. Strategic management of these changes is very important. Change management is aprocess of implementing changes in process and strategies in a pre-planned way. This transforms

individuals, teams, and organizations into a desired future state.

Q5) List the different types of organization culture.

Ans: There are different types of culture just like there are different types of personality.Researcher Jeffrey Sonnenfeld identified the following four types of cultures.

1 According to Jeffrey Sonnenfeld

i) Baseball Team Culture

Employees are "free agents" who have highly prized skills. They are in high demand and can

rather easily get jobs elsewhere. This type of culture exists in fast-paced, high-risk organizations,such as investment banking, advertising, etc.

ii) Club Culture

The most important requirement for employees in this culture is to fit into the group. Usually

employees start at the bottom and stay with the organization. The organization promotes fromwithin and highly values seniority. Examples are the military, some law firms, etc.

iii) Academy Culture

Employees are highly skilled and tend to stay in the organization, while working their way up theranks. The organization provides a stable environment in which employees can develop and

exercise their skills. Examples are universities, hospitals, large corporations, etc.

iv) Fortress Culture

Every organization undergoes massive reorganization. There are many opportunities for those

who are timely, organized and have specialized skills. Examples are savings and loans, large car

companies, etc. Organizational culture contributes a lot to organizational effectiveness.

2 Four Academic Models

The issue of organizational effectiveness or OE, has been one of the most sought out yet elusive

research subject since the early development of organizational theory. Although it seems

intuitively apparent that a measure of organizational performance should be readily available in

management literature, but quite the contrary is true. Four key models have been identified in theliterature.

8

8/3/2019 Mu0011 Both Set

9/20

One model used production, commitment, leadership, and interpersonal conflict to measure

organizational effectiveness. Production was defined as the flow of output from the

organization.

A second OE model was proposed based on interrelated organizational processes and was

developed primarily as a tool for management consultants. This model uses organizationalsurvival and maximizing return as key variables of effectiveness along with self-regulation,

which is responsible for orchestrating a balance between eight other minor variables includinginternal-external boundary permeability, sensitivity to status and change, contribution to

constituents, transformation, promoting advantageous transactions, flexibility, adaptability, and

efficiency.

A third model chose six selected indicators of organizational effectiveness includingmanagement experience, organizational structure, political impact, board of directors

involvement, volunteer involvement, and internal communications.

The fourth and final academic model was used to compare for-profit and non-profitorganizational effectiveness and is termed the competing value framework. This model used

four quadrants representing (1) human relations, (2) open systems, (3) rational goals, and (4)

internal process.

3 Deal and Kennedy's Model of Culture

Deal and Kennedy's model of culture is based on characterizing four types of organization. Theorganizations are characterized based on how quickly they provide feedback and reward

employees after they have done something and the level of risks that employees take.

Feedback and reward

A major driver of employees in companies (and hence their culture) is the general feedback andspecific rewards that tell employees they are doing a good or bad job. If feedback is immediate

or frequent, it will quickly correct any ineffective behavior and hence lead to a consistent culture.

If the feedback is delayed or infrequent, it leaves mistakes uncorrected, but it also lets people

look further out into the future. Either way, there is likely to be some substitute activity (such asprocess management) to help keep things on track until actual results are known.

Risk

Uncertainty and risk are something that some people hate and some people thrive on. In eithercase, it is another motivating force that leads people to focus on managing it. Where the risk islow, people may be willing to take risks up to their acceptable limit. Where they are high, the

risks need to be managed or accepted. High risk companies are more likely to include people

who enjoy the frisson of taking a gamble.

9

8/3/2019 Mu0011 Both Set

10/20

Fig.2: Deal and Kennedy's model of culture

The Four Cultures

Work-Hard, Play-Hard Culture

Another type of organizational culture is the "work hard/play hard" organizational culture. This

type of an organizational culture that doesn't take a lot of risks, but it does take a few, and all

receive fast feedback. This is something most likely to be seen in a very large company which isdependent on strong customer service. This type of organizational culture is often characterized

by multiple team meetings, specialized jargon, and buzzwords.

Tough-Guy Macho Culture

One type of organizational culture is the "tough-guy culture" or "macho culture." One of themost common aspects of the tough-guy or macho culture is the quick feedback and high rewards.

The pace can be break neck at times, but the obvious reward of the action is seen very quickly.

From a corporate stand point, this type of organizational culture will be most often associatedwith really fast financial activities, such as currency trading, and brokerage.

Process culture

A process culture is most often found in organizations where there is actually no feedback. This

is rarely a good culture. In this type of an organizational culture people are so obsessed with theprocess of how things are done that the focus is lost on what the goal is. Process organizational

culture is a synonym for bureaucracy. It is good for public sector services.

This has slow feedback/reward and low risk, leading to:

Low stress, plodding work, comfort and security. Stress may come from internal politics

and stupidity of the system.

Development of bureaucracies and other ways of maintaining the status quo.

Focus on security of the past and of the future.

E.g. banks, insurance companies.

Bet-The-Company Culture

10

http://resources.smude.edu.in/slm/wp-content/uploads/2010/10/clip-image004410.jpg

8/3/2019 Mu0011 Both Set

11/20

"Bet your company culture." This is a type of company where huge decisions are made over high

stakes endeavors. In this type of culture, the end results of these decisions may not be seen for

months or even years.

4 Culture Classification in Indian Scenario

A study was conducted by J B P Sinha dealing with cases from Indian organizations that

concluded. The interplay of different forces in the Indian organizations, has led to the emergence

of different patterns of organizational culture in Indian organizations. (Sinha, Jai B.P (2000).Patterns of Work Culture: Cases and Strategies for Culture Building New Delhi, Sage

Publications.)

The main patterns are:

Soft Culture: This type of culture is commonly observed in the public sector organizations,

there may also be certain exceptions. Such culture may emerge in any organization where the

nature of ownership is not necessarily the determining factor. It emerges mostly in organizationswhich have multiple and conflicting organizational objective.

Technocratic Culture: It is likely to develop in the organization which aims at providing the

highest quality of product and services through the use of latest technology.

Work Centric Nurturing Culture (WCNC): The WCNC is more oriented to content and here

employee focus is on rewards, hard work, recognizing merit, establishing clear norms of

performance and adequate workload. Formal systems are established to make the organizationrealize its goals.

Q6) Write a note on designing interventions.

Ans: Designing OD interventions needs to pay attention to the needs and dynamics of the changesituation and developing a change program that will be consistent with the previously described

criteria of effective interventions. Current OD knowledge and practices can provide only a

general prescription for change for the better. There is very little input or information on how to

design interventions. There is also no research to show how the interventions are expected tointeract with organizational situations to achieve specific results. Also the effectiveness of a

particular intervention is higher or lower depending on the practitioners expertise and comfort

with that intervention. Therefore the design of an intervention depends on the situation and theexpertise of the practitioner. The last factor that impacts the design of the OD intervention is the

target of change. In summary, there are 3 key factors affecting the designing of interventions.

1. The situation

2. The practitioners competencies (knowledge and skill)

3. The target at the end of the intervention

11

8/3/2019 Mu0011 Both Set

12/20

Assignment Set- 2

Q.1) Explain the role negotiation technique in detail.

Ans: The process of role negotiation was originally described by Harrison. This technique is a

real-world oriented one which can lead to a workable solution in cases involving competition,

coercion and power struggles. What is the exact process in which role negotiation occurs? Itprovides a method for one person or group to negotiate and structure the role, or working

arrangements, with respect to the other. It may include the nature of the activities that one

expects out of the other, the reporting relationships, rules for escalation, who is responsible forwhat decisions, which will carry them out, the consequences for non-performance, etc. This

process can prove useful in most situations involving competition, power, control and influence.

1 Advantages

The most significant advantage of Role Negotiation is that is makes things explicit. Thefacilitator helps everyone understand that each participant has some degree of power, from the

positive, rewarding good behavior in others during the contracting process. So that others dont

need to keep guessing it is preferable that the expectations are clarified and defined. They

understand the relationship with greater certainty than would be the case if things were stillcovert or underground. With this process, people better understand how to influence others in the

group.

2 Negotiation

After each person has clarified the messages he or she has received, issues are selected for

negotiation. The facilitator needs to re-emphasize certain things so that there is no point in

proceeding with the discussion on any particular item. In simple words, everyone must be

prepared to make some sort of changes to get what he or she wants. If the behavior doesntchange on both sides, the status quo will prevail. By an iterative process, each person selects and

communicates his or her most important issues and eventually the group comes to a consensus

about which ones will be dealt with at this point.

After this when all parties (two or more) are satisfied that an appropriate agreement has beenreached, the participants write down the agreement to formalize it as a contract. Several

negotiations may take place simultaneously, depending on the number of people or groups

involved. All agreements are published for everyone to see and are discussed openly in the group(public commitment increases the chances for compliance).

3 Dynamics of Role Negotiation

This process focuses on the working relationships between people, not their feelings about one

another. As such, it is less threatening to most groups and more accessible than other techniquesthat place greater emphasis on interpersonal dynamics. People tend to be more at home

12

8/3/2019 Mu0011 Both Set

13/20

discussing issues of power and influence on the job, rather than those involving feeling and

emotion.

Q.2) Explain the Johari Window model.

Ans: The Johari Window model was proposed by American psychologists Joseph Luft and Harry

Ingham in 1955 while researching group dynamics, as a very simple yet useful tool for which

could be used for improving self-awareness, and mutual understanding between individualswithin a group. Assessment of one groups relationship with the other is something which can

also be done using this model.

The Johari Window is accepted as a concept which can be of great help in gauging an employee

or employer relationships within the Psychological Contract.

The four Johari Window perspectives are known as 'quadrants'. These four quadrants representfeelings, motivation, etc. known about the person, in terms of whether the information is known

or unknown by the person. Refer fig. 8.1 Johari Window.

First quadrant open area/open self/free area/free self implies what is known by the person about

himself or herself and is also known by others.

Second Quadrant blind area, blind self, or blind spot implies what is unknown by the person

about him/herself but which others know.

Third Quadrant hidden area, hidden self, avoided area, avoided self or facade' implies what the

person knows about him/herself that others do not know.

Fourth Quadrant unknown area or unknown self implies what is unknown by the person abouthim/herself and is also unknown by others.

Fig. Johari Window

1 The Johari Model Quadrants in details

13

http://resources.smude.edu.in/slm/wp-content/uploads/2010/10/clip-image00279.jpg

8/3/2019 Mu0011 Both Set

14/20

Quadrant 1 - 'open self/area' or 'free area' or 'public area', or 'arena'

Region 1 is also referred to as the 'area of free activity'. This region gives an information about

the person - behavior, attitude, feelings, emotion, knowledge, experience, skills, views, etc -known by the person ('the self') and known by the group ('others').

The aim in any group should always be to develop the 'open area' for every person, because

when we work in this area with others we try to be as effective and productive as possible and

the group is at its most productive too. The open free area can be considered as the space wheregood communications and cooperation occurs, free from distractions, mistrust, confusion,

conflict and misunderstanding.

Quadrant 2 - 'blind self' or 'blind area' or 'blind spot'

Region 2 of the model represents the blind spot or what is known about a person by others in the

group, but is unknown by the person him/herself. By seeking feedback from others, the aim

should be to reduce this area and thereby to increase the open area (refer to the model diagrambelow). This blind area is a non-effective or non-productive space for individuals or groups. This

area could also be referred to as ones ignorance about oneself. We are well aware of howdifficult it is to work well if kept in the dark.

Quadrant 3 'hidden self' or 'hidden area' or 'avoided self/area' or 'facade'

Region 3, which is referred to as hidden area which implies what is known to ourselves but kept

hidden from others. This hidden or avoided self represents information, feelings, etc, anythingthat a person knows about him/self, but which is not revealed or is kept hidden from others. The

hidden area could also include sensitivities, fears, hidden agendas, manipulative intentions, and

secrets - anything that a person knows but does not reveal, for whatever reason. It's natural forvery personal and private information and feelings to remain hidden, indeed, certain information,feelings and experiences have no bearing on work, and so can and should remain hidden.

Quadrant 4 'unknown self' or 'area of unknown activity' or 'unknown area'

Region 4 which is referred to as the unknown area contains information, feelings, latent abilities,

aptitudes, experiences etc, that are both unknown to the person him/herself as well as unknownto others in the group also. These unknown issues may take the form of feelings, behaviors,

attitudes, capabilities, aptitudes, and more which can be quite close to the surface, and which can

be positive and useful.

Examples of unknown factors are as follows:

a person not realizing a natural ability or aptitude that he possesses

a person having any unknown illness

A person not knowing that he has a fear or aversion.

The ability of a person that under-estimated or un-tried through lack of opportunity,

encouragement, confidence or training

14

8/3/2019 Mu0011 Both Set

15/20

A persons repressed or subconscious feelings

A persons conditioned behavior or attitudes from childhood

Whether unknown 'discovered' knowledge moves into the hidden, blind or open area depends onwho discovers it and what they do with the knowledge, notably whether it is then given as

feedback, or disclosed.

Q.3) Discuss quality circles.

Ans: Quality Circle is a small volunteer group of six to twelve employees doing similar kind ofwork. They voluntarily meet together on a regular basis to carry out frequent checks in their

respective work areas for improvements. They use certain proven techniques for analyzing and

solving work related problems coming in the way of achieving and sustaining excellence so that

they can bring about a mutual upliftment of employees as well as the organization.

So basically a volunteer group is composed of workers, under the leadership of their supervisor

who are trained to identify, analyze and solve work-related problems are collectively calledQuality circle. They present their solutions to management for the improvement oforganizational performance. Tue quality circles become self-managing after gaining management

confidence.

If anything could battle the dehumanizing concept of division of labor, it is Quality circle. It has

brought back the concept of craftsmanship, which doesnt work well on an individual basisbecause it is uneconomic, but it proves a boon when used in group form. The prime motto of QC

is improving occupational safety and health, improving product design, and improvement in the

workplace and manufacturing processes.

1 Key Features of Quality Circle:

They are formal groups.

They hold meetings at least once a week on company time and are trained by competent

persons who may be personnel and industrial relations specialists.

Quality circles are generally free to select any topic they wish, but they cannot selectsalary related topics or other topics related to terms and conditions of work, because these

issues are dealt with via other channels.

2 The Concept

The concept of Quality Circle primarily focuses on a workers value recognition as a humanbeing, as someone who willingly takes on his job, his wisdom, intelligence, experience, attitudeand feelings. It is just another part of human resource management considered as one of the key

factors in the improvement of product quality & productivity. Quality Circle concept has three

major attributes:

Quality Circle is a human resource development technique.

Quality Circle is a problem solving technique.

15

8/3/2019 Mu0011 Both Set

16/20

Quality Circle is a form of participation management.

3 Objective of QC

There multi-faced objectives of Quality Circles:

Change in Attitude.

Self Development

Development of Team Spirit

Improved Organizational Culture

Benefits and Limitations of Quality Circles

The quality control concept did not get an easy acceptance in India. It took two decades to get

acceptance in India, after its introduction in Japan. The reason might be differences in the

industrial context in the two countries. Japan needed it for its survival in a competitive market.

India had a reasonably protected, sellers market, with consequent lethargy towards efforts toimprove quality and productivity. However, with the policy of liberalization of economy and

privatization of infrastructure development, contexts changed. The concept now needs to be

looked upon as a necessity.

Q.4) What is the role of organizational politics? Explain

Ans: As discussed earlier, Politics may be defined as the pursuit of individual agendas and self-

interest in an organization without putting much importance to their effect on the organization'sefforts to achieve its goals. Behavior referred to as organizational politics takes place in varying

degrees in all organizations. Not all behavior in the organizations can be categorized as political.The organizational political process can be described in non-evaluative terms.

1 The Foundation

Whenever we gain some organizational power, we should be more careful in using it to influencenot to get our own way, but the way that will ultimately be best for the organization and for

achieving our own personal mission. And this must be focused on making a difference beyond

meeting our own needs.

Whenever were struggling to get our way, we easily criticize others for being overly-political or

playing dirty tricks. While it can be the other way round as well. As in, it might also be the casethat just as others might be unfair in their practices; it can also be true that we ourselves lose

sight of the value of diversity of thought and different ways of seeing.

2 Defining and exploring Organizational Politics

To simplify everything lets consider organizations to be political systems. This term political will

help us understand the power involved in relationships in day-to-day organizational

16

8/3/2019 Mu0011 Both Set

17/20

relationships. Accepting the fact that power relations exist in organizations it will become easier

for us to accept that politics is also an essential part of organizational life.

The meaning of the term Politics can be put forward as a means of recognizing and, ultimately,reconciling competing interests within the organization. Competing interests can be reconciled

by any number of means. Politics may also be considered as a means of creating a democraticwork environment.

Each type of organizational rule simply draws on different principles of legitimacy. Politicsstems from a diversity of interests. Organizational actors seek to satisfy not only organizational

interests, but also their own needs driven by self-interest.

According to Aristotle, politics stems from a diversity of interests. To fully understand the

politics of the organization, it is necessary to explore the processes by which people engage inpolitics. Consistent with Aristotle's conceptualization, it is a given that, within the organization,

all employees bring their own interests, wants, desires, and needs to the workplace.

Though Organizational decision-making and problem-solving is seemingly a rational process, it

is also a political process. Organizational actors seek to satisfy not only organizational interests,but also their own wants and needs; driven by self-interest.

Political behavior has been defined as the non-rational influence on decision making

To practice successful organizational politics, it is perceived to lead to a higher level of power.

Regardless of the degree to which employees may be committed to the organization's objectives,there can be little doubt that, at least occasionally, personal interests will be incongruent with

those of the organization. Organizational politics arises when people think differently and want

to act differently.

Political means can resolve the tension created by this diversity In an autocratic organization,resolution comes through the directive: "We'll do it my way!". The democratic organization

seeks to resolve this diversity of interests by asking: "How shall we do it?" By whatever means

an organization resolves this diversity, alternative approaches generally hinge on the power

relations between the actors involved.

For purposes of understanding organizational political behavior, Farrell and Peterson (1982)

proposed a three-dimensional typology. The dimensions are:

Functional Vs Dysfunctional Conflict, Sources and Types of Conflict: Individual, Group, and Organization

The Process and Approaches to Conflict Resolution

Q.5) Discuss OD applications for merged and acquired organizations.

Ans: How is OD helpful in the successful merger and acquisitions of organizations?

17

8/3/2019 Mu0011 Both Set

18/20

Gaughan (1991) defines a merger as a combination of two corporations in which only one

corporation survives and the merged corporation goes out of existence.

Vaara, defines a merger

as a combination of organizations of fairly similar size, which creates an organization whereneither party can clearly be seen as the acquirer.

The three main types of mergers are:

Conglomerate mergerIn this type the two companies dont have to be related in any way at all,

in fact the conglomerate may want unrelated companies in its portfolio because it allowsspreading of risks. Two other types are vertical and concentric mergers.

Vertical mergers are practically the same as forward or backward integration, which allows a

company to control a bigger part of the whole product chain.

Concentric mergers are mergers between two companies in different but somehow related

industries, which allows the companies to share marketing or technical resources, relatedmergers occur when companies in the same industry merge their activities. These mergers allow

a high level of synergy but they may also require a higher degree of integration than the other

types of mergers

The clash between the two cultures in a merger or acquisition can be focused into three majorareas:

1. Structure. These factors from the two cultures include the size, age, and history of two firms;

the industry in which the partners come from and now reside; the geographic location; andwhether products and/or services are involved.

2.Politics. Where does the power and managerial decision making really reside? Corporate

cultures range from autocratic extremes to total employee empowerment, and how this plays out

among the partners will be important to cultural compatibility.

3.Emotions. The personal feelings, the culture contract that individuals have bought into toguide their day-to-day thoughts, habits, attitudes, commitment, and patterns of daily behavior.

These emotions will be a major input into the clash or compatibility of the two cultures.

Q6) Write a note on training for consultation skills.

Ans:1 Defining Consultations

It is a process of regulation by which input from the public on matters affecting them is soughtand solved. Its major goals are in improving the transparency, efficiency and public involvement

in large-scale projects or laws and policies. It usually involves sending a notification to publicize

the matter to be consulted on followed by consultation which is a two-way flow of information

18

8/3/2019 Mu0011 Both Set

19/20

and opinion exchange and lastly participation which involves interest groups in the drafting of

policy or legislation.

2 Principles for Effective Consulting

An effective consulting has different perspectives. The following guidelines might be useful asyou reflect on your own principles for effective consulting.

The answer to complex problems lies between you and your client

The answer emerges during the project as you and your client work collaboratively to clarify

current issues and address them, while learning at the same time.

Encouraging and recognizing diverse values and perspectives

An experienced organizational consultant is aware of the different perspectives on an issue in the

organization. Those perspectives should be encouraged and explored because they often lead tomore successful problem solving.

When working with your client, start from where they are now

Understand your clients perspective on their issues, including what they have tried, what hasworked, what has not worked and what they think should be done now. It is better to go slower

withyour client than faster without them.

No blame is to be put on consulting situations

It is rare that anyone sets out to hurt someone else or an organization. An atmosphere of blameonly serves to inhibit people in your clients organization from the trust, collaboration and

commitment necessary for successful change.

Come to the project with a basic consultation framework in mind

Early in a project, the major purpose of the framework can be used as a common frame of

reference when talking about the project goals, methods, evaluation and learning. Be willing tomodify that framework as you and your client work together.

Your value is in the flow of the process, not in the details of the project

If both of you continue to work together in a process that is collaborative, well understood,

communicated to all and focused on results, your client will value you.

The road to success is paved from who you are as from your expertise

19

8/3/2019 Mu0011 Both Set

20/20

If youre perceived authentic, respectful, and consulting with focus on results and learning by the

client then it paves the way for success. Similarly, one of the most powerful influences that can

have with your clients is to model the behaviors that you want from them.

Do what you say you are going to do

While the client is confused, you can help a great deal by remaining grounded and centered, clear

and consistent. Your consistency builds trust and commitment with clients, as well.

Know yourself

You are an instrument of change with your client, so you should be willing to suspend youroverall biases, assumptions and beliefs when working with people. Be honest about them when

they arise during a project.

Avoid making your clients to do something just because you said so

Always first explain the reasons for your advice and the benefits that might come to your client

as a result. Then provide time for your client to respond to your advice. This is usually true evenif you are a leader acting as an internal change agent.

It is up to your client to use your advice or not

This is sometimes one of the hardest principles for new consultants to accept. It helps if you

remember that people learn only what they are ready to learn.

Do not take it personally

Often your client struggles with an issue, in part, because of their role in the issue. They may not

want to change themselves and might resist your attempts to help them. In those instances,

remember that those responses are their choices, not yours.

20