MS-900 Self-Adhesive Markers · • All standard markers comply with the ASME A13.1 “Scheme for...

2
markservcanada.ca MS-900 Self-Adhesive Markers Marking Services Canada (MSC) offers MS-900 self-adhesive markers as an economical and easy way to mark pipes and ducts/equipment. Our self-adhesive markers are made from durable vinyl material suitable for line marking identification and system color coding. Why spend hours fiddling with tape and typing each system into a small label maker to print markers one at a time? MS-900 markers comply with ASME (ANSI) and CAN/CGSB standards, have an industrial grade adhesive and are easy to install. Simply clean and dry the pipe, remove the marker from the coated paper backing and place in the desired location. Highly visible color-coded labels make it easy to differentiate between systems Printed on premium-quality, fade-resistant vinyl with durable, industrial grade adhesive Adheres well to pipe and insulation with only limited surface preparation Legend markers can be used with arrow tape or separate arrow markers to indicate flow direction All standard markers comply with the ASME A13.1 “Scheme for the Identification of Piping Systems” and CAN/ CGSB-24.3-12 standard when coupled with arrow tape Fast turnaround with off-the-shelf delivery on stock legends No minimum order quantity Wide variety of standard colors available Markers can be customized to designate the specific system, service or point of origin Roll Markers and Arrow Tape Single Markers March 2015

Transcript of MS-900 Self-Adhesive Markers · • All standard markers comply with the ASME A13.1 “Scheme for...

Page 1: MS-900 Self-Adhesive Markers · • All standard markers comply with the ASME A13.1 “Scheme for the Identification of Piping Systems” and CAN/ CGSB-24.3-12 standard when coupled

markservcanada.ca

MS-900 Self-AdhesiveMarkers

Marking Services Canada (MSC) offers MS-900 self-adhesive markers as an economical and easy way to mark pipes and ducts/equipment. Our self-adhesive markers are made from durable vinyl material suitable for line marking identification and system color coding.

Why spend hours fiddling with tape and typing each system into a small label maker to print markers one at a time? MS-900 markers comply with ASME (ANSI) and CAN/CGSB standards, have an industrial grade adhesive and are easy to install. Simply clean and dry the pipe, remove the marker from the coated paper backing and place in the desired location.

• Highly visible color-coded labels make it easy to differentiatebetween systems

• Printed on premium-quality, fade-resistant vinyl with durable,industrial grade adhesive

• Adheres well to pipe and insulation with only limited surfacepreparation

• Legend markers can be used with arrow tape or separatearrow markers to indicate flow direction

• All standard markers comply with the ASME A13.1 “Schemefor the Identification of Piping Systems” and CAN/CGSB-24.3-12 standard when coupled with arrow tape

• Fast turnaround with off-the-shelf delivery on stock legends• No minimum order quantity• Wide variety of standard colors available• Markers can be customized to designate the specific system,

service or point of origin

Roll Markers and Arrow Tape

Single Markers

March 2015

Page 2: MS-900 Self-Adhesive Markers · • All standard markers comply with the ASME A13.1 “Scheme for the Identification of Piping Systems” and CAN/ CGSB-24.3-12 standard when coupled

markservcanada.ca

Style Marker Pipe Diameter (including insulation) Marker Size Letter Size

A 3/4” - 2 1/4” 1” x 8” 3/4"

B 2 1/2” - 7 7/8” 2 1/4” x 13” 1 3/4"

C 8” - 10” 4”x 24” 2 1/2"

D Over 10” 4”x 32” 3 1/2"

Standard sizes and colors – additional sizes available upon request

Customized MS-900 markers from MSC take the mystery out of your pipes and equipment by identifying critical information based on your specifications. MSC custom pipe markers provide an alternative for identifying pipes when standard legends won’t work.

• Markers can be customized todesignate the specific systemor point of origin

• Fast delivery; usually shipswithin 24 hours, complete andready to install

• No set-up charges or minimumorder quantity requirements

*Directional flow arrow tape is available in roll sizes of 1”, 2” & 4” wide by 30 yards long.

Current 2007 ANSI/ASME A13.1 Standards

Classification Color Scheme

Defined ApplicationsFire quenching liquids White text on red Sample

Toxic and corrosive fluids Black text on orange Sample

Flammable fluids Black text on yellow Sample

Combustible fluids White text on brown Sample

Potable, cooling, boiler feed and other water

White text on green Sample

Compressed air White text on blue Sample

Undefined ApplicationsDefined by user White text on purple Sample

Defined by user Black text on white Sample

Defined by user White text on gray Sample

Defined by user White text on black Sample

*ASME (ANSI) A13.1 (1996) and CAN/CGSB-24.3-12 spec colors available

Marking Services Canada improves and standardizes the identification of hazards and components to promote safer work environments and minimize downtime due to errors or accidents. We provide a full complement of identification products designed to fulfill identification needs in nearly any environment. Through our commitment to providing value-added services, high-quality products and on-time delivery, MSC offers you a one-stop, comprehensive source for all your identification needs.

For more information: Marking Services Canada Ltd.3902 81st Avenue • Leduc, Alberta Canada T9E0C3Toll free: 844.986.8480 • Ph: 780.986.8480 • [email protected]