MP GO! Evolution Specifications Sheet.
description
Transcript of MP GO! Evolution Specifications Sheet.
-
Gearless LiftMPGO! EvolutionFrom 450 kg (6 passengers) to 1275 kg (17)Machine roomless
MP610GO! | MP616GO! | MP810GO!MP816GO! | MP1010GO! | MP1016GO!MP1310GO! | MP1316GO! | MP1710GO!MP1716GO!
SERIES S
MODELS MP610GO! MP616GO! MP810GO! MP816GO! MP1010GO! MP1016GO! MP1310GO! MP1316GO!
Capacity (pssgrs) 6 6 8 8 10 10 13 (*) 13 (*)
Speed (m/s) 1,0 1,6 1,0 1,6 1,0 1,6 1,0 1,6
Starts/tour 180 180 180 180 180 180 180 180
Power (C.V.) 4 8 5 8 6 12,8 7 12,8
Nominal Intensity (A) 11,6 22,2 14,9 22,2 16,5 34,2 18,9 34,2
Q rated load (Kg) 450/480 450/480 600/630 600/630 750/800 750/800 1000 1000
PL clearance (mm) 800 800 800 800 900 900 900 900
AC car width (mm) 1000 1000 1100 1100 1200 1200 1100 1100
FC car depth (mm) 1250 1250 1400 1400 1500 1500 2100 2100
HC clear car height (mm) 2100 2100 2100 2100 2100 2100 2100 2100
AH shaft width (mm) 1500 1500 1600 1600 1700 1700 1600 1600
FH shaft depth (mm) 1500 1500 1650 1650 1750 1750 2350 2350
PH pit (mm) 1025 1155 1025 1155 1025 1155 1025 1155
OH overhead clearance (mm) 3400 3600 3400 3600 3400 3600 3400 3600
No of ropes and diameter (mm) 5x6,5 5x6,5 6x6,5 6x6,5 7x6,5 7x6,5 8x6,5 8x6,5
D.B.G. Distance between guides (mm) 1050/1100 1050/1100 1150/1200 1150/1200 1250/1300 1250/1300 1150/1200 1150/1200
Max. distance between supports (mm) 1500/3000 3000 1500/3000 3000 1500/3000 3000 1500/3000 3000
Car guide rail (5 m sections) 70/65/9 90/75/16 70/65/9 90/75/16 70/70/9 90/75/16 70/70/9 90/75/16
Counterweight guide (5 m sections) 50/50/5 70/70/9 50/50/5 70/70/9 65/54/8 70/70/9 70/70/9 70/70/9
Configuration 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1
Shaft construction concrete concrete concrete concrete concrete concrete concrete concrete
Certificate of design ACIN3 2010 ACIN3 2010 ACIN3 2010 ACIN3 2010 ACIN3 2010 ACIN3 2010 ACIN3 2010 ACIN3 2010
STANDARD ENTRANCE DOUBLE ENTRANCE 180
DIAGRAM
NOTE: technical specifications such as No of cables or guide rails are subject to the total weight of the lift and may be different to this table.OVERHEAD CLEARANCE 3400 mm and PIT 1025 mm in accordance with EN 81-1 without applying compensatory safety measures.Minimum shaft width. Recommended shaft width=AH minimum+100mm(*) Maximum P+Q of 2230kg. The design must be changed for larger P+Qs.
Product Options:- Reduced overhead clearance up to 3000 mm. For overhead clearances of less than 3400 mm and up to 3000 mm the safety levels required in the EN 81-21 New Lift in existing building are applied.- Reduced pit up to 645 mm. In Pits of less than 1025 mm and up to 645 mm the safety levels required in the EN 81-21New Lift in existing building are applied. www.mplifts.com
MPPA
SSGO
S6-21ENV01
P PassengersV Speed m/sAH Shaft widthFH Shaft depthAC Car widthHC Clear car height
FC Car depthOH Overhead clearancePH PitPL ClearanceR Travel
LEGEND
1/2
TRAV
EL
-
Gearless LiftMPGO! EvolutionFrom 450 kg (6 passengers) to 1275 kg (17)Machine roomless
MP610GO! | MP616GO! | MP810GO!MP816GO! | MP1010GO! | MP1016GO!MP1310GO! | MP1316GO! | MP1710GO!MP1716GO!
STANDARD ENTRANCE DOUBLE ENTRANCE 180
DIAGRAM
MPPA
SSGO
S6-21ENV01
P PassengersV Speed m/sAH Shaft widthFH Shaft depthAC Car widthHC Clear car height
FC Car depthOH Overhead clearancePH PitPL ClearanceR Travel
LEGEND
SERIES S
MODELS MP1710GO! MP1716GO!
Capacity (pssgrs) 17 17 (*)
Speed (m/s) 1,0 1,6
Starts/tour 180 180
Power (C.V.) 10,2 17,7
Nominal Intensity (A) 29,7 33
Q rated load (Kg) 1275 1275
PL clearance (mm) 1000 1000
AC car width (mm) 1200 1200
FC car depth (mm) 2300 2300
HC clear car height (mm) 2100 2100
AH shaft width (mm) 1750 1750
FH shaft depth (mm) 2550 2550
PH pit (mm) 1200 1200
OH overhead clearance (mm) 3400 3600
No of ropes and diameter (mm) 9x6,5 9x6,5
D.B.G. Distance between guides (mm) 1300 1300
Max. distance between supports (mm) 1500 1500
Car guide rail (5 m sections) 120/76/9 120/76/9
Counterweight guide (5 m sections) 70/70/9 70/70/9
Configuration 2:1 2:1
Shaft construction concrete concrete
Certificate of design ACIN 3 1000 Kg ACIN 3 1000 Kg
2/2Note: (*) Maximum P+Q of 2230kg. The design must be changed for larger P+Qs.-The number of cables is subject to the total weight of the lift.-Overhead clearance of 3400mm and a pit of 1200mm in accordance with EN81-1 without applying any compensatory securitymeasures (rubber floor and a speed of 1 m/s).-The table shows the minimum shaft width. The diagrams show the recommended shaft width. Recommended shaft width=AH minimum+100mm
Product Options:- Overhead clearance reduced by up to 3160mm. In lower overhead clearances of between 3400mm and 3160mm, the security level in the 81-21New lift in existing building is applied.- Pit reduced up to 695mm. In smaller pit sizes of between 1200mm and 695 mm, the security level in the 81-21 New lift in existing building is applied.
TRAV
EL
www.mplifts.com