MOTOR PULLEY CATALOGUE · 2014. 8. 24. · kmpa1534c31850033aaa 34.4 41.4 kmpa2234c26555096aaa 96.3...

R4

A CMOTOR PULLEY CATALOGUE

English version

KYOWA MANUFACTURING CO., LTD

Motor Pulley available voltages diagram

Standard Standard High-voltage High-voltage High-voltage High-voltage High-voltage

Diameter Output Pole Phase Frequency 200Ｖ 220Ｖ 380Ｖ 400Ｖ 415Ｖ 440Ｖ 460Ｖ

50Ｈｚ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○

60Ｈｚ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○ ○

50Ｈｚ ○ ○ ○ ○

60Ｈｚ ○ ○ ○ ○

* Please confirm to turn off power-supply when rotation direction is changed.* ON-OFF term must be less than three times in a minute. Otherwise the life of motors will be shortened.

( Ex. 10seconds-ON ⇒　10seconds-OFF )

φ114100W

or

80W

4P

3Phase

40W

φ76

30W 4P

2P

6Ｐ

6Ｐ

4Ｐ

NOTICE

1.7ｋｗ

6Ｐ

4Ｐ2.2ｋｗ

3.7ｋｗ

φ215

1.7ｋｗ

1.5ｋｗ

1.1ｋｗ

0.6ｋｗ

2.2ｋｗ

0.24kｗ 4Ｐ

φ318

0.4kｗ

1.0ｋｗ

φ140

6Ｐ

4Ｐ

0.24ｗ

* Applicable ambient temperature : -10 to 40℃ ( 15 to 85% RH , no condensation )

4Ｐ

φ265

* Please note that the motor will be burn-out immediately when it is locked.

φ165

* Please equip breaker or so for motor protection.* Please avoid carrying with CT-cable that may occur scratching or damaging inside.* Please adjust motor pulley and conveyor belts tention surely.

1.5ｋｗ

1.5ｋｗ

( 1 )

Motor Pulley minimum available length diagram

Diameter Phase Output Pole Stage Standard Water-proof Stainless Brake Anti-reverse

30W 4 3 336 360 360 × ×

302 326 326 × ×

327 × × × ×

326 350 350 × ×

351 × × × ×

2 285 285 285 345 295

3 300 300 300 360 310

4 320 320 320 × 330

2 300 300 310 × ×

3 310 310 330 400 ×

1-Phase 0.4kw 4 2 330 330 × × ×

2 300 300 310 380 310

3 310 310 330 400 ×

2 300 300 310 380 310

3 310 310 330 400 ×

1-Phase 0.4kw 4 3 380 380 × × ×

2 380 380 380 450 380

410 410 430 500 410

420 420 440 500 420

0.6kw 6 2 380 380 380 460 380

2 380 380 380 380 380

410 410 430 500 410

420 420 440 510 420

2 450 450 450 550 450

3 480 480 490 600 480

2 450 450 450 550 450

3 480 480 490 600 480

2.2kw 4 3 480 480 490 600 480

1.7kw 6 3 480 480 490 600 480

1.5ｋｗ 4 3 480 480 490 600 480

2.2kw 4 3 480 480 490 600 480

1.7kw 6 3 480 480 490 600 480

3.7ｋｗ 4 2 510 510 520 × 510

2

3

Ｈｉｇｈ voltageｓ


40W 2

100W

or

80W

4

3Phaseφ76

φ114 3Phase

φ1653Phase

20AAA with Brake

= 3stage gear

23AAA with Brake

= 3stage gear0.4kｗ 4

41.5ｋｗ

φ265 3Phase 1.1kw 6

φ318

40.24kｗφ140 3Phase

φ215

3Phase

3Phase

0.24kw 6

3

3

1.5ｋｗ 4

1.0ｋｗ 4

Remark

28AAA with Brake

= 3stage gear



( 2 )

KMP - A 3Z 3 - 4 C - 076 400 - 05 A A A

KMP - A 10 3 - 4 C - 215 - 380 - 36 A A A① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫

① Abbreviation of Kyowa Motor PulleyCommon to all model designations

② Type

A :

B :

C :

D :

J :

③ Output 3Z=30W-39W 01=100W 10=1.0Kw 37=3.7Kw

4Z=40W-49W 02=200W 15=1.5Kw

8Z=80W-89W 04=400W 22=2.2Kw ※Indicates nominal output at 50Hz

④ Power supply 1 : 1-phase 3 : 3-phase

⑤ Pole number of motors 4 : 4 poles type 6 : 6 poles type

⑥ Rating Continuous rating (100%ED 8hours/1day)

⑦ Outer diameter of pulley076 : φ076 114 : φ114 140 : φ140 165 : φ165

215 : φ215 265 : φ265 318 : φ318

⑧ Pulley width Dimension λ (unit : mm)

⑨ Nominal speed of pulley surface (unit : m/min , at 50Hz)

⑩ Rubber lagging , pulley shell type A : Standard F : Flat natural black rubber , 5mm thick S : Spur natural black rubber , 10mm thick

B : Straight drum M : Magnet ring type Y : Others

W: W-helical natural black rubber , 10mm thick

⑪ Motor type and voltage A : 200,200,220V/50,60,60Hz 3phase E : 415V/50Hz 3phase L : 440V/60Hz 3phase

B : 100,100,110V/50,60,60Hz 1phase G : 380V/60Hz 3phase M: 460V/60Hz 3phase

C : 380V/50Hz 3phase H : 400V/60Hz 3phase Y : Others

D : 400V/50Hz 3phase J : 415V/60Hz 3phase

⑫　Custom specification A : Standard B : Semi-standard Y : Others ( special shaft , stainless steel side plate , etc )

Model Nomenclature

Standard K : Brake + Waterproof ( Built-on power module )

S : Anti-reverseBrake ( Add-on power module )

L : Brake + Waterproof ( Add-on power module )Brake ( Built-in power module )

Stainless W : Waterproof

Waterproof + Anti-reverse

( 3 )

Order example

　　　　　　

Gear

50Hz 60Hz Stage l L l1 l2 dφ W

KMP-A4Z3-2C-076-302-40AAA 48.9 59.4

KMP-A4Z3-2C-076-326-30AAA 27.1 32.9

KMP-A4Z3-2C-076-326-20AAA 22.3 27.1

KMP-A4Z3-2C-076-326-17AAA 18.8 22.9

KMP-A4Z3-2C-076-326-15AAA 15.5 18.9

KMP-A4Z3-2C-076-326-12AAA 12.5 15.2

KMP-A4Z3-2C-076-326-10AAA 10.4 12.6

KMP-A4Z3-4C-076-326-08AAA 7.6 9.2

KMP-A4Z3-4C-076-326-05AAA 5.5 6.7

KMP-A3Z3-4C-076-336-04AAA 3.9 4.7

KMP-A4Z3-4C-076-336-03AAA 2.9 3.5

KMP-A013-4C-114-285-40AAA 40.7 48.5

KMP-A013-4C-114-285-30AAA 30.8 36.7

KMP-A013-4C-114-285-28AAA 28.5 34.0

KMP-A013-4C-114-285-25AAA 24.3 28.9

KMP-A013-4C-114-285-20AAA 20.3 24.2

KMP-A013-4C-114-285-18AAA 18.4 22.0

KMP-A013-4C-114-300-15AAA 15.8 18.8

KMP-A013-4C-114-300-10AAA 10.6 12.7

KMP-A013-4C-114-320-08AAA 7.7 9.2

KMP-A013-4C-114-320-05AAA 5.4 6.4

KMP-A023-4C-140-310-28AAA 27.4 33.0 2 310 360

KMP-A023-4C-140-310-20AAA 20.0 24.0

KMP-A023-4C-140-310-13AAA 13.2 15.9

* ↑ Straight drum is the standard for 140mm dia.

KMP-A041-4C-165-330-30ABA 29.9 36.1 2 330 400 35 30 25 20

KMP-A043-4C-165-330-42AAA 42.3 50.9

KMP-A043-4C-165-330-36AAA 36.6 44.1

KMP-A043-4C-165-330-30AAA 30.1 36.3

KMP-A043-4C-165-330-23AAA 23.3 28.0

KMP-A043-4C-165-330-20AAA 19.7 23.7

KMP-A043-4C-165-330-9.0AAA 8.8 10.6

KMP-A043-4C-165-330-7.8AAA 7.7 9.2

KMP-A043-6C-165-330-15AAA 15.5 18.6 2 400 35 30 25 20

KMP-A043-6C-165-330-5.2AAA 5.1 6.1 3 394 32 25 28 23

○

320 370

3 386336

285

300

320

335

25 15 24 21

370

2

3

0.64/0.60

4

350

352

376×25 142017.5

2

3

302

326

Standard type

Type Out put Outer diameter of pulley Rubber ・Shell type Custom specification

○2.0/1.7

×

3

330

400

394

35

330

25 20

32 25 28 233

2 30

○

ＫＭＰＫＭＰＫＭＰＫＭＰ - A □□□□□□□□ □□□□ －－－－ □□□□ ＣＣＣＣ－　－　－　－　□□□□□□□□□□□□ －－－－ □□□□□□□□□□□□ －－－－ □□□□□□□□　　　　□□□□ □□□□ □□□□

25 15 24 21 ×

　 Power supply Continuous rating Pulley width Motor type and voltage

Pole number of motors Nominal speed of pulley surface

Belt speed

(m/min)

Dimensions

( unit : mm ) Anti-reverse

Rated current

Type

1.87/1.5

8.5/6.4

2.88/2.29

50/60Hz

( A )

0.3/0.26

0.28/0.26

( 4 )

Gear


KMP-A103-4C-215-380-60AAA 57.9 69.7

KMP-A103-4C-215-380-48AAA 47.7 57.4

KMP-A103-4C-215-380-36AAA 36.3 43.7

KMP-A103-4C-215-380-30AAA 30.8 37.0

KMP-A103-4C-215-380-25AAA 25.3 30.5

KMP-A103-4C-215-380-20AAA 20.6 24.8

KMP-A103-6C-215-380-16AAA 16.9 20.4

KMP-A103-6C-215-380-13AAA 13.8 16.6

KMP-A103-4C-215-430-16AAA 15.6 18.8

KMP-A103-4C-215-430-13AAA 13.3 16.0

KMP-A153-4C-215-380-36AAA 35.9 43.3 2 380 450 35 30 28 23

KMP-A153-4C-215-450-50AAA 47.1 56.8

KMP-A153-4C-215-450-39AAA 39.7 47.9

KMP-A153-4C-215-450-33AAA 33.4 40.3

KMP-A153-4C-215-450-30AAA 29.0 35.0

KMP-A153-4C-215-450-25AAA 25.2 30.4

KMP-A153-4C-215-450-20AAA 19.9 24.0

KMP-A153-4C-215-450-16AAA 15.5 18.7

KMP-A153-4C-215-450-13AAA 13.2 15.9

KMP-A153-4C-265-450-43AAA 44.8 53.9

KMP-A153-4C-265-450-34AAA 35.1 42.2

KMP-A153-6C-265-450-22AAA 23.0 27.6 2 450 550 50 40 38 28

KMP-A153-4C-265-500-96AAA 96.5 116.0

KMP-A153-4C-265-500-67AAA 66.6 80.1

KMP-A153-4C-265-500-59AAA 59.2 71.2

KMP-A153-4C-265-500-42AAA 41.5 49.9

KMP-A153-4C-265-500-28AAA 28.7 34.5

KMP-A153-6C-265-500-18AAA 18.8 22.6 3 500 600 50 40 38 28

KMP-A153-4C-318-500-50AAA 49.8 59.9

KMP-A153-4C-318-500-41AAA 40.7 49.0

KMP-A153-4C-318-500-33AAA 34.4 41.4

KMP-A223-4C-265-550-96AAA 96.3 115.9

KMP-A223-4C-265-550-67AAA 66.5 80.0

KMP-A223-4C-265-550-59AAA 59.1 71.1

KMP-A223-4C-265-550-51AAA 50.5 60.8

KMP-A223-4C-265-550-47AAA 46.7 56.2

KMP-A223-4C-265-550-42AAA 41.4 49.9

KMP-A223-4C-265-550-33AAA 33.9 40.8

KMP-A223-4C-265-550-28AAA 28.6 34.5

KMP-A223-6C-265-550-18AAA 18.9 22.5 3 550 650 50 40 38 28

5.2/4.4

3.1/2.8

5.2/4.4 3 430

2 380 450 35 30 28 23○

×

2 380 450 35 30 28 23 ○

23 ○500 35 30 28

Anti-reverse

( A )

50/60Hz (m/min)

6.6/6.0

7.1/6.2

5206.8/6.0 35

2

×○

○

6.8/6.028 ○

450 30 28 23

3850 40

6.0/5.2

7.1/6.2 3 500

○

50 40 38 28 ○

600 50 40 38

○

○

10.4/9.0 3 550 650 50 40 38 28

Type

Rated current Belt speed Dimensions

( unit : mm )

450 550

2

3

9.2/8.0 ○

28

600

○

6.0/5.2 ○

7.1/6.2 3 500

( 5 )

Gear


KMP-A223-4C-318-550-71AAA 70.9 85.3

KMP-A223-4C-318-550-56AAA 56.0 67.4

KMP-A223-4C-318-550-50AAA 49.7 59.9

KMP-A223-4C-318-550-41AAA 40.6 48.9

KMP-A223-4C-318-550-33AAA 34.4 41.4

KMP-A223-6C-318-550-22AAA 22.6 27.0 3 550 650 50 40 38 28

KMP-A373-4C-318-550-96AAA 96.6 116.2

KMP-A373-4C-318-550-67AAA 67.0 80.6

KMP-A373-4C-318-550-50AAA 52.1 62.7

○50 40 38 2814.5/14.0 2 550 650

○

9.2/8.0 ○

10.4/9.0 3 550 650 50 40

Anti-reverse

38

Type


( unit : mm )50/60Hz (m/min)

( A )

28

( 6 )

Standard Motor Pulley

2 Stage type ( Molded case type ) 　　　　　　　　2 Stage type ( Shell type )

3 Stage type ( Molded case type ) 3 Stage type ( Shell type )

ComponentsNo. Unit No. Unit

1 1 8B 1

1A 1 8C 1

1B 1 9 1

1C 1 10 1

1E 1 10A 1

1H 4 10B 1

1J 1 10C 1

2 1 10D 1

2A 8 10E 1

2B 1 10F 1

3 1 10G 1

3A 1 11 1

3B 1 11A 8

3E 1 13 1

4 1 14 1

4A 1 15 1

5 1 15A 1

5A 4 15B 1

5B 1 15C 1

6 1 15D 1

6A 4 15E 1

6B 1 15F 1

7 1 15G 1

8 1 15H 1

8A 1

Snap-ring

Key

Snap-ring

Bearing

Spacer

Spacer

Bearing

Snap-ring

Key

Bolt ( Hex hall )

Drive-gear

Bearing

Drum

Motor shaft

Rotor

Open-plate

Flat screw ( Cross hall )

Oil-seal

Pinion-shaft

Snap-ring

Drive-gear

Bearing

Bearing

Drive-gear

Key

Bearing

Spacer

Pinion-shaft

Oil-seal

Gear-side lock shaft

Bearing

Gear side-plate

Flat screw ( Cross hall )

Bush

Cabtire cable

Bolt ( Hex hall )

Unload lock-shaft

Key

Fixing bolt

Motor Pulley / Standard type

Description

Motor bracket

Fixing bolt

Snap-ring

Internal gear

Description

Motor case

Stator

Fixing screw ( Hex hall )

Bearing

Gear case

Hexagon bolt

( 7 )

Order example

ＫＭＰＫＭＰＫＭＰＫＭＰ - B □□□□□□□□ □□□□ －－－－ □□□□ ＣＣＣＣ－　－　－　－　□□□□□□□□□□□□ －－－－ □□□□□□□□□□□□ －－－－ □□□□□□□□　　　　□□□□ □□□□ □□□□　　　　　　

Type Out put 　　　　 Rubber ・Shell type Custom specification

Continuous rating Pulley width Motor type and voltage

Nominal speed of pulley surface

・　Electric brake operates when power-supply turns OFF.

Brake is operated by its spring power and opened

　　by magnetic power so that the torque comes up swiftly

in addition to quick braking.

･　 Brake is operated automatically even power supply is

　　cut off to avoid possible dangers.

・　Built-in or Add-on power module is available

・　Standard brake type obtains built-in power module.

・　Available minimum length is restricted.

Dimensions Dimensions for add-on power module ( 3-Phase 200V,400V )

* Same dimensions as standard type.

Structure diagram ( 1.0kw 2stages ) Structure diagram ( 2.2kw 3stages )

☆　The label　《上》　 is put on the plane of the shaft.

　　　Please make this respect upward, and fix both shafts surely.

　　　（Grease flows out, and it leads to the decrease the gear longevity and the motor may suffer burnout.）

☆　Please use the inclination angle of the conveyer by 20°or less.

* In case of Brake (Add-on power module) type, the description should be

　　‘KMP－C□□□－□Ｃ－□□□－□□□－□□□□□’

For details, please contact us.

Brake type

Outer diameter of pulley

ＮＯＴＩＣＥ

* Specify add-on power module when inverter is used with.

Power supply

Pole number of motors

　　Ａｌｓｏ，note that high-voltage type is applicable for only "Add-on power module model ".

( 8 )

Order example

ＫＭＰＫＭＰＫＭＰＫＭＰ - W □□□□□□□□ □□□□ －－－－ □□□□ ＣＣＣＣ－　－　－　－　□□□□□□□□□□□□ －－－－ □□□□□□□□□□□□ －－－－ □□□□□□□□　　　　□□□□ □□□□ □□□□　　　　　　




・Protection grade IP55. ( can not be used in water )

Avoid splashing water directly on shaft parts.

Doing so may deteriorate waterproofness.

・The material of both shafts is SUS304.

・Available minimum length is restricted.

Shaft dimensions * Same dimensions as standard type exept for below diagrams

Dimension Structure diagram

* For details, see P 9 & 10.



　　　（Grease flows out, and it leads to the decrease the gear longevity and the motor may suffer burnout. ）


☆　For combined model, please contact us.

ＮＯＴＩＣＥ

Waterproof Type


Power supply


( 9 )

Gear


KMP-W4Z3-2C-076-326-40AAA 41.9 50.9 2 326 376

KMP-W4Z3-2C-076-350-30AAA 24.9 30.2

KMP-W4Z3-2C-076-350-20AAA 18.6 22.6

KMP-W4Z3-2C-076-350-15AAA 14.0 17.0

KMP-W4Z3-2C-076-350-10AAA 10.5 12.7

KMP-W3Z3-4C-076-360-08AAA 7.3 8.8

KMP-W3Z3-4C-076-360-05AAA 5.4 6.6

KMP-W013-4C-114-285-40AAA 40.7 48.5

KMP-W013-4C-114-285-30AAA 30.8 36.7

KMP-W013-4C-114-285-28AAA 28.5 34.0

KMP-W013-4C-114-285-25AAA 24.3 28.9

KMP-W013-4C-114-285-20AAA 20.3 24.2

KMP-W013-4C-114-285-18AAA 18.4 22.0

KMP-W013-4C-114-300-15AAA 15.8 18.8

KMP-W013-4C-114-300-10AAA 10.6 12.7

KMP-W013-4C-114-320-08AAA 7.7 9.2

KMP-W013-4C-114-320-05AAA 5.4 6.4

KMP-W023-4C-140-310-28AAA 27.4 33.0 2

KMP-W023-4C-140-310-20AAA 20.0 24.0

KMP-W023-4C-140-310-13AAA 13.2 15.9

KMP-W041-4C-165-330-30ABA 29.9 36.1 2 330 400 35 30 25 20

KMP-W043-4C-165-330-42AAA 42.3 50.9

KMP-W043-4C-165-330-36AAA 36.6 44.1

KMP-W043-4C-165-330-30AAA 30.1 36.3

KMP-W043-4C-165-330-23AAA 23.3 28.0

KMP-W043-4C-165-330-20AAA 19.7 23.7

KMP-W043-4C-165-330-9.0AAA 8.8 10.6

KMP-W043-4C-165-330-7.8AAA 7.7 9.2

KMP-W043-6C-165-330-15AAA 15.5 18.6 2 400 35 30 25 20

KMP-W043-6C-165-330-5.2AAA 5.1 6.1 3 394 32 20 28 23

KMP-W041-4C-215-330-30ABA 30.1 36.3 2 330 400 35 30 25 20

KMP-W103-4C-215-380-60AAA 57.9 69.7

KMP-W103-4C-215-380-48AAA 47.7 57.4

KMP-W103-4C-215-380-36AAA 36.3 43.7

KMP-W103-4C-215-380-30AAA 30.8 37.0

KMP-W103-4C-215-380-25AAA 25.3 30.5

KMP-W103-4C-215-380-20AAA 20.6 24.8

KMP-W103-6C-215-380-16AAA 16.9 20.4

KMP-W103-6C-215-380-13AAA 13.8 16.6

KMP-W103-4C-215-430-16AAA 15.6 18.8

KMP-W103-4C-215-430-13AAA 13.3 16.0

0.64/0.60

335

21 ○

350

370

2 285

3 300

25 17.5

17.50.30/0.26400

0.28/0.26 410

3

3

×

×

25 15 24

20 14

20 14

25

4 320

350

360

Waterproof Available Descriptions

50/60Hz

Rated current

( A )Type

1.8/1.5

8.5/6.4

2.8/2.2

5.2/4.4

3.1/2.8

5.2/4.4 3 430

2 380

24 21 ×

Belt speed

(m/min)

Dimensions

( unit : mm ) Anti-reverse

310 380 35 15

×

3

3

2

330

400

394

35 30

○

25 20

32 20 28 23

○2.0/1.7

8.5/6.4 ×

330

2 380 450 35 30 28 23○

×

450 35 30 28 23 ○

23 ○535 52.5 30 28

( 10 )

Gear


KMP-W153-4C-215-380-36AAA 35.9 43.3 2 380 450 35 30 28 23

KMP-W153-4C-215-450-50AAA 47.1 56.8

KMP-W153-4C-215-450-39AAA 39.7 47.9

KMP-W153-4C-215-450-33AAA 33.4 40.3

KMP-W153-4C-215-450-30AAA 29.0 35.0

KMP-W153-4C-215-450-25AAA 25.2 30.4

KMP-W153-4C-215-450-20AAA 19.9 24.0

KMP-W153-4C-215-450-16AAA 15.5 18.7

KMP-W153-4C-215-450-13AAA 13.2 15.9

KMP-W153-4C-265-450-43AAA 44.8 53.9

KMP-W153-4C-265-450-34AAA 35.1 42.2

KMP-W153-6C-265-450-22AAA 23.0 27.6 2 450 550 50 40 38 28

KMP-W153-4C-265-500-96AAA 96.5 116.0

KMP-W153-4C-265-500-67AAA 66.6 80.1

KMP-W153-4C-265-500-59AAA 59.2 71.2

KMP-W153-4C-265-500-42AAA 41.5 49.9

KMP-W153-4C-265-500-28AAA 28.7 34.5

KMP-W153-6C-265-500-18AAA 18.8 22.6 3 500 600 50 40 38 28

KMP-W153-4C-318-500-50AAA 49.8 59.9

KMP-W153-4C-318-500-41AAA 40.7 49.0

KMP-W153-4C-318-500-33AAA 34.4 41.4

KMP-W223-4C-265-550-96AAA 96.3 115.9

KMP-W223-4C-265-550-67AAA 66.5 80.0

KMP-W223-4C-265-550-59AAA 59.1 71.1

KMP-W223-4C-265-550-51AAA 50.5 60.8

KMP-W223-4C-265-550-47AAA 46.7 56.2

KMP-W223-4C-265-550-42AAA 41.4 49.9

KMP-W223-4C-265-550-33AAA 33.9 40.8

KMP-W223-4C-265-550-28AAA 28.6 34.5

KMP-W223-6C-265-550-18AAA 18.9 22.5 3 550 650 50 40 38 28

KMP-W223-4C-318-550-71AAA 70.9 85.3

KMP-W223-4C-318-550-56AAA 56.0 67.4

KMP-W223-4C-318-550-50AAA 49.7 59.9

KMP-W223-4C-318-550-41AAA 40.6 48.9

KMP-W223-4C-318-550-33AAA 34.4 41.4

KMP-W223-6C-318-550-22AAA 22.6 27.0 3 550 650 50 40 38 28

KMP-W373-4C-318-550-96AAA 96.6 116.2

KMP-W373-4C-318-550-67AAA 67.0 80.6

KMP-W373-4C-318-550-50AAA 52.1 62.7

3

35520

555

6.6/6.0 ○

6.8/6.6

2

450

○×

○

23

52.5 30 28 23

30 28

28 ○

○

9.2/8.0 ○

14.5/14.0 2 550 650 50 40 38

9.2/8.0 ○

10.4/9.0 3 550 650 50 40

○

38 28

Type


( unit : mm )

28

600

50

50 40 38 2810.4/9.0 3 550 650

6.0/5.2 ○

7.1/6.2 3 500 600 50 40 38 ○

○

50 40 38 28 ○

38

6.0/5.2

7.1/6.2 3 500

450 550 407.1/6.2

2

Anti-reverse

( A )

50/60Hz (m/min)

6.8/6.028 ○

( 11 )

Order example

ＫＭＰＫＭＰＫＭＰＫＭＰ - D □□□□□□□□ □□□□ －－－－ □□□□ ＣＣＣＣ－　－　－　－　□□□□□□□□□□□□ －－－－ □□□□□□□□□□□□ －－－－ □□□□□□□□　　　　□□□□ □□□□ □□□□　　　　　　




・Protection grade IP55. ( can not be used in water )

Avoid splashing water directly on shaft parts.

Doing so may deteriorate waterproofness.

・This motor pulley has all stainless material ( appearance )

・Minimum available length is restricted.

Dimension


Structure diagram






All Stainless type


Power supply


ＮＯＴＩＣＥ

( 12 )

Order example

ＫＭＰＫＭＰＫＭＰＫＭＰ - S □□□□□□□□ □□□□ －－－－ □□□□ ＣＣＣＣ－　－　－　－　□□□□□□□□□□□□ －－－－ □□□□□□□□□□□□ －－－－ □□□□□□□□　　　　□□□□ □□□□ □□□□　　　　　　




・One-way clutch is equipped inside, therefore the rolation allows

　 only one direction.

・Suitable to prevent reversal on inclining conveyors.

・Please confirm if the rotation direction is correct as testing.

When the pulley does not rotate, cut the power supply

immediately and change the connection 2lines out of 3lines.

■■■■　　　　Clutch bearing structure ■■■■　　　　Clutch bearing structure

Dimension Structure diagram


☆　The rotation direction indicates that is from cord-side.

　　　(In case of reverse direction necessity, change connection red-red/white white to red-white/white-red.)






ＮＯＴＩＣＥ

Anti-reverse type


Power supply


ＰＯＩＮＴ

( 13 )

Flat rubber lagging ( standard: 5mm thick ) W-herical rubber lagging ( standard: 10mm thick )

Spur rubber lagging ( standard: 10mm thick ) Urethane rubber lagging

　* W-herical rubber lagging is suitable to prevent belt-sliding that is only for forward rotation.

　* White rubber lagging, Nitrile rubber lagging and other special rubber laggings are also applicable. For details, contact us.

* The surface speed will be up.

Dimensions of V-grooved rubber lagging.

(Unit：ｍｍ)

Ｖ-shape ｗＷＨ

Ｍ-type ６．０１０．０５．５

Ａ-type ６．０１２．５９．０

Ｂ-type ８．５１６．５１１．０

Rubber lagging type

( 14 )

Order example

ＫＭＰＫＭＰＫＭＰＫＭＰ - ＡＡＡＡ □□□□□□□□ □□□□ －－－－ □□□□ ＣＣＣＣ－　－　－　－　□□□□□□□□□□□□ －－－－ □□□□□□□□□□□□ －－－－ □□□□□□□□　　　　ＭＭＭＭ □□□□ □□□□　　　　　　

Type Out put 　　　　 Magnet ring Custom specification



・ Magnetic power differs slightly depending on products

・ 2mm thick Stainless ring rolled on a center part of a pulley

is to avoid belt-sliding.

( In case of 215mm dia/380mm length, the ring is 150mm thick)

・ The surface speed gets faster.

l φD1 φD l1 l２Ｌ φｄＷ330 208.6 165 35 30 400 25 20

330 208.6 165 32 25 394 28 23

380 266 215 35 30 450 28 23

450 266 215 35 30 520 28 23

450 315 265 50 40 550 38 28

500 397 318 50 40 600 38 28

550 315 265 50 40 650 38 28

550 397 318 50 40 650 38 28

550 397 318 50 40 650 38 28

※Distance from surface of magnet ring motor pulley



　　　（Grease flows out, and it leads to the decrease the gear longevity and the motor may suffer burnout.）


50

60

Years where magnetism is transmitted to frame 5 - 6 years Wire of tag 90

Magnetism characteristic

Durability of Magnet Permanent Magnet M12×30L Hex bolt

Magnet Ring Type


Power supply


ＮＯＴＩＣＥ

26

3 stage gear 26

2 stage gear

Model type The speed rate of increase (%)

KMP-A043-4C-165-330

Dimension Application example

24

KMP-A153-4C-215-450 2 or 3 stage gear 24

KMP-A103-4C-215-450 2 or 3 stage gear



KMP-A223-4C-265-550 3 stage gear 19


40


( Unit: mm )

Distance

M6 Washer 40

Specification

Gap from surface 10mm

Empty canGap from surface 0mm 1350Ｇｒ 110

Bare magnet 50mm Nail

700Ｇｒ

item Magnet Ring type MP

Type of material

Ability

M6 Nut

( 15 )

1. Standard type

Change Red line with White one for reversal rotation.

2. Brake type ( Built-in Power module )

■■■■ 3-Phase / 200V class ■■■■　　　　3-Phase / 400V class

Change Red line with White one for reversal rotation. Change Red line with White one for reversal rotation.

3. Brake type ( Add-on Power module )

■■■■ 3-Phase / 200V class ■■■■　　　　3-Phase / 400V class

4. Combined use of Inverter ( ex. Brake type / 400V class )

Basic wiring diagram

( 16 )

●●●● About surge caused by motors

1 What is surge? Turning on or off the power of electric devices nearly always cause

instantaneous surge ( a high voltage noise ) to be generated.

When such an electric device contains a coil ( winding ), in partucular,

a considerably large surge may be generated.

A motor roller contains a winding that will cause a surge.

2 When a surge is generated A surge may propagate through a power distribution line and could

cause damage to or malfunction of electronic components.

3 When the motor is turned on and off with

high frequency ( in intervals of a few seconds ) A surge is generated each time when the motor is turned on or

off. The surge is genetated in the motor winding, which means that

the winding is exposed to a high voltage of a few thousand and the

insulation of the winding suffers damage.

As a result, a breakdown and layer short-circuit fault may occur.

●●●● Surge Protection

A. Use a contactless relay ( SSR ) ⇒ If the motor is turned on/off with a contact relay ( magnet switch, toggle switch,orthe like ), a surge is generated. It is therefore best to use a contactless relay.

Ｂ．Ｂ．Ｂ．Ｂ．Use a surge absorber ⇒ A surge absorber is generally called as an arc killer or surge killer, and is used when contact is performed with a contact relay.

CR method

This is a combination of capacitor and resistor.

C method

Capacitor is used.

Varistor method

Varistor is a kind of semiconductor.

Kyowa Manufacturing Co.,LtdAddress : 570-10 Kubota-cho, Kasai-city, Hyogo-prefecture JAPAN

TEL : +81-790-42-0601 FAX : +81-790-42-4895

Web site : http://www.kyowa-mfg.co.jp

* The information contained in this catalogue is subject to be changed without notice.

Surge Voltage ( Surge Protection )

( 17 )

MP English catalogue R41/42/43/44/4

MP English catalogue R4-11/22/2

MP English catalogue R4-21/22/2

MP English catalogue R4-3MP English catalogue R4-4MP English catalogue R4-51/22/2

MP English catalogue R4-61/52/53/54/55/5

MP English catalogue R4-7

MOTOR PULLEY CATALOGUE · 2014. 8. 24. · kmpa1534c31850033aaa 34.4 41.4 kmpa2234c26555096aaa 96.3...

Documents

Transcript of MOTOR PULLEY CATALOGUE · 2014. 8. 24. · kmpa1534c31850033aaa 34.4 41.4 kmpa2234c26555096aaa 96.3...