Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 1 of 15

Mortise gauge plan - Locking screw version

This design consist of a single stem which has a groove cut out of one side. A small wooden slider, carrying aspur, fits into the groove, and can be locked in any position along the lenght of the stem. The groove is filled in at oneend by a small block of wood. The second spur is hammered through the block.

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 2 of 15

Parts list

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 3 of 15

Assembly drawing

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 4 of 15

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 5 of 15

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 6 of 15

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 7 of 15

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 8 of 15

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 9 of 15

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 10 of 15

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 11 of 15

Assemblage images

1.

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 12 of 15

2.

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 13 of 15

3.

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 14 of 15

4.

5.

Project from www.craftsmanspace.com Project: Mortise gauge plan - Locking screw version Page 15 of 15