Wood Furniture & Fixture Manufacturing FacilityWood Furniture & Fixture Manufacturing FacilityONLINE AUCTION

Veneer Press • CNC Router • Panel Saws • Shaper • Jointer • Molder • Band Saws • SawsSanders • Planer • Edge Bander • Laser Shape Cutter • Mills • Finishing Equipment

Polishing Lathes • Air Compressors • Factory Equipment • Presses • Particle Board • More

INSPECTION: Tuesday, March 24, 2015 9:00 am - 4:00 pm EDT

BID ONLINE: Monday, March 23 through Wednesday, March 25

PPL Pennsylvania Auction License No. AY002183

7601 Edmund Street Philadelphia, PA 19136FixtureOneBy Order of Secured Lender – Assets Formerly Owned by:

18% Online Buyer’s Premium Applies

BID ONLINEONLY

105 Revere Drive, Suite CNorthbrook, Illinois 60062

Phone: 224.927.5320sales@pplauction.com

www.pplauctions.com

Exclusive rigger for FixtureOne Auction: A&A Machinery Moving & Sales – Call Nick Lykon at 800-626-6330.

All equipment is sold strictly “as is, where is”. AUCTIONEER’S NOTE: A break-in occurred at FixtureOne recently,and much of this equipment has been vandalized. Buyers are strongly advised to inspect before buying.

New2005

New2008

PPL Auction Phone: 224.927.5320 www.pplauctions.com

VENEER PRESS • CNC ROUTER • PANEL SAWSAlmex Veneer Press Model TL6-59-114, S/N 2005-07-12232 (2005)Homag CNC Machining Center/Router Type B0F211/Venture 13L, S/N 0-201-09-6099 (2008), w/Vacuum Table, Dust Collector (as is - vandalized)Altendorf Sliding Table Panel Saw Model WA8, S/N 05-06-671, Scoring, Work Table, Feed Table, Rip FenceGiben 12’ Panel Saw Model Sigma 301, S/N 06101380, Rear Load, Stack Elevator, with Dust Collector (as is – vandalized)

SHAPER • JOINTERFortis Single-Spindle Shaper Model DFDA-4, S/N 0277, 3-Roll Power Stock FeedDelta 16” Round Head Jointer Model RJ42, S/N 1330

ss

Mark YourCalendar

BID ONLINE

March 23thru

March 25,2015

New2005

New2008

PPL Auction Phone: 224.927.5320 www.pplauctions.com

MOLDERWeinig 4-Head Electric Molder Model Profitmat 22N, S/N 226-7851 (as is wiring)

BAND SAWS • SAWSAmada Automatic Horizontal Band Saw Model HA-250, S/N 457506, Power Stroker & Clamping, Coolant (as is)Baileigh Horizontal Band Saw Model BS-260SA, S/N 06031697, Adjustable Stock Stop, CoolantRockwell 20” Vertical Band Saw, S/N 117-2741 • Dayton 15” Vertical Band Saw • Delta 12” Pedestal Vertical Band Saw, S/N 88D21375Tannewitz Tilting Arbor Table Saw Model XJS, S/N 14249, with 3-Roll Power Stock Feed(3) Delta 10” Unisaw Tilting Arbor Table Saws, S/Ns 98D-90830, 96B-99493, N/A, Work Table, Rip FenceBaileigh 14” Cold Saw Model CS-350SA, S/N 503394L, Pneumatic Clamping, Adjustable Stock StopTomet 14” Mitering Cold Saw Model T350, S/N 3300, Manual Clamping & Feed • Tomet Abrasive Cut-off SawThe Original Radial Arm Saw Model 3531-03, S/N 97080588

PLACE BIDSONLINE ONLY

PPL Auction Phone: 224.927.5320 www.pplauctions.com

SANDERS • PLANER • EDGE BANDER • LASER SHAPE CUTTEROakley 6” Edge Sander Model H6, S/N 3657 • Holz Stroke Sander, S/N 1052, Manual Feed Work TableCemco 36” 2-Head Wide Belt Sander Model 2000 (as is) • Timesavers 2-Head Wide Belt SanderPowermatic 24” Planer Model 201, S/N 03122010617 • Brandt CNC Edge Bander Model KDF-660, S/N 0-261-02-1690 (as is)Cincinnati CNC Laser Shape Cutter Model C1500B, S/N 48710, 48” x 102” Shuttle Table, GE Fanuc Model 1500B Power Supply, Custom Automation Vacuum Sheet Load Assist, CNC Control (vandalized)

MILLS • FINISHING EQUIPMENTBridgeport 2 HP Series I Variable Speed Vertical Mill, S/N 230910, 9” x 42” Power Feed Work TableBridgeport 1-1/2 HP Variable Speed Vertical Mill, S/N J126189, 9” x 42” Power Feed Work Table, 8” Riser, 6” Vise, Digital ReadoutBridgeport 1-1/2 HP Variable Speed Vertical Mill, S/N J231476, 9” x 42” Power Feed Work Table, 6” Riser, Digital ReadoutBridgeport 1-1/2 HP Vertical Mill, S/N 153661, 9” x 42” Power Feed Work TableBridgeport 1 HP Vertical Mill, S/N J-66460, 9” x 42” Work TableBridgeport 1/2 HP Vertical Mill, S/N (BH1486), 9” x 42” Power Feed Work TableJR Greene 3-Stage Gas Fired Stainless Steel Pass-Thru Overhead Conveyor Parts Washer Model Dakite Enpro-Clean 1300, S/N 930101 (1993), 58”W x 70”H Opening, 4,000,000 BTU, 37.5 HP Pumps, 10’W x 49’L x 11’H Overall, JRG ControlsJR Greene Gas Fired Overhead Conveyor Drying/Bake Oven, S/N 930104 (1993), 59.5”W x 66”H Opening, 1,500,000 BTU, 11’W x 35’L x 13’H Overall, with ControlsJR Greene Gas Fired Overhead Conveyor Bake Oven, S/N 930105 (1993), 60”W x 77”H Opening, 15’W x 76’L x 13’H Overall, with ControlsSpray Tech Walk-in Paint Spray Booth, 106”W x 105”H Opening, 148”W x 27’ 4” L x 12’H OverallOpenside Paint Spray Booth, 16’ 3” W x 6’ 5” D x 7’ 9” H Internal Dimensions, 9’L x 17’W x 10’H OverallOpenside Paint Spray Booth, 14’ 10” W x 4’ 5” D x 9’ 8” H Internal Dimensions, 15’ 5” W x 8’ 4” D x 11’H OverallGAT Gas Fired Batch Bake Oven, 60”W x 102”H Opening, 11’ 10” W x 22’ 6” L x 10’ 4” H Overall, with Controls237’ Overhead Finishing Conveyor, with Drive, Spray Booth

s s

PPL Auction Phone: 224.927.5320 www.pplauctions.com

POLISHING LATHES • AIR COMPRESSORS(4) Assorted G&P Double End Polishing Lathes Models VS300, SS300, VS500, S/Ns G-4135, G-2932, 0-9129, G-8909Kaeser 200 HP Rotary Air Compressor Model DSD200, S/N 1019 (2002), 125 PSI, 877 CFMIngersoll Rand 140 HP Rotary Air Compressor Model SSR500H-AAH9, S/N 21680478A, 125 PSI, 500 CFMGardner Denver 5 HP 2-Stage Horizontal Tank Mounted Reciprocating Air Compressor Model 32-ADD-645, S/N N4214Deltech Hydroguard Refrigerated Air Dryer Model HC400, S/N 864HG2830 (as is – not running)

MISCELLANEOUS EQUIPMENTUnihone 2-Hole Reach-in Blast Cabinet Model 3600C, S/N 987515, with Rotary Table & Dust CollectorNiagara 6’ Power Shear Model 672 • Harig 6” x 12” Hand Feed Surface Grinder, 6” x 12” Permanent Magnetic ChuckVertical Hydraulic Rotary Frame Bender (as is) • Penn Horizontal Rotary Pneumatic Frame BenderPexto 36” x 16 - 18 ga. Manual Pinch Roll Model 390E • Wire Guard Systems 47” x 94” Vacuum Former (as is)International Ind. Dust Collector Model 13-OMH, S/N 212-OMH-92 • Belfab Dust Collector, S/N 2003-09-170067-1 (2003)Dustek Dust Collector Model 1000-DB, S/N 605-08-93 • Dustek 3-Bag Dust Collector, with Fan(7) Assorted Vidmar Multiple-Drawer Tooling Storage Cabinets, with Tooling ContentsDiAcro Bench Top Manual Punch No. 1 • (4) Delco, Powermatic & Standard Double End Grinders • Electric/Hydraulic Scissor Lift Table

March 23 - 25

PLACE BIDS ONLINE ONLY at

New2002

PPL Auction Phone: 224.927.5320 www.pplauctions.com

See Complete Auction Terms & Conditions at www.pplauctions.com

18% Online Buyer’s Premium Applies

BID ONLINEONLY

105 Revere Drive, Suite CNorthbrook, Illinois 60062

Phone: 224.927.5320sales@pplauction.com

www.pplauctions.com

FACTORY EQUIPMENTNewport Corp. 4’ x 14’ Research Series Optical Table, with Pneumatic Isolation MountsLors 75 KVA Pneumatic Press Type Spot Welder Model 175AD-DV, S/N 397-6312 (as is)Taylor Winfield 50 KVA Rocker Arm Spot Welder Model ND24-50, S/N 736788 (as is)PED Technologies Electric Drying Oven, S/N 0961101, 8’ 8” W x 28’L x 10’ 4” H (as is – wiring issues)Blum Multipress Hinge Pocket Press Model MS11053, S/N CD3330Factory Equipment including: Pallet Rack, Cantilever Material Storage Racks, Benches, Shop Tables, Scissor Lift Table, Collets, Manual Bar Bender, Tool Box, Storage Cabinets, Steel Tables, Self Dumping Hopper, Shop Fans, etc.

PRESSES • PARTICLE BOARDL&J 56 Ton OBI Press No. 5, S/N 56110, 4”/3”/11.25”, 18.5” x 30” • Niagara 2-Point Gap Press, 20” x 48” Bed, Air Clutch(12) Bunks Panolam 5’ x 9’ x 3/4” Satin 2-Sided Particle Board • (4) Bunks Panolam 4’ x 8’ x 3/4” Satin 2-Sided Particle Board

s