Module descriptor - ARC1004M
3
University of Lincoln Module Specification - Buildable, Habitable Design 2015-16 Buildable, Habitable Design 2015-16 1. Basic Module Data Module Title: Buildable, Habitable Design School: School of Architecture & Design Subject: Architecture Module Code: ARC1004M Credit Rating: 30 Level: Level 1 Pre-requisites: None Co-requisites: None Barred Combinations: None Module Co-ordinator(s): Barbara Griffin (BGriffin) 2. Module Synopsis The aims of this module are - • To develop an understanding of the principles of structure and construction related to domestic and low rise buildings, • To develop the reasoning ability of the student in the selection and appraisal of materials and techniques used in the construction of buildings, • To introduce legislation pertaining to building design and use, particularly that concerned with safety and comfort of occupants and the environment, • To develop an understanding of climate and microclimate, principles of environmental physics, properties of building materials and human comfort. A series of lectures supports analytical activities and a design project that demonstrates principles put into practice. 3. Outline Syllabus Substructure, foundation Structure, principles, load-bearing, frame, special architectural structures Walls, masonry and timber frame construction, damp proof courses, window and door types Floors, concrete and timber, ground and upper, damp proof membranes Stairs, design considerations, types of layout, statutory requirements Roofs, flat and pitched in timber, structure, weatherproofing, insulation, decay, condensation, fire, coverings, rooflights Finishes, internal floors, walls and ceilings, external renders, paints, stains Document Generated on 9 September 2015 Page 1/3
Transcript of Module descriptor - ARC1004M
University of Lincoln Module Specification - Buildable, Habitable Design 2015-16
Buildable, Habitable Design 2015-16
1. Basic Module Data
Module Title: Buildable, Habitable Design
School: School of Architecture & Design
Subject: Architecture
Module Code: ARC1004M
Credit Rating: 30
Level: Level 1
Pre-requisites: None
Co-requisites: None
Barred Combinations: None
Module Co-ordinator(s): Barbara Griffin (BGriffin)
2. Module Synopsis
The aims of this module are -• To develop an understanding of the principles of structure and construction related to domestic andlow rise buildings,• To develop the reasoning ability of the student in the selection and appraisal of materials andtechniques used in the construction of buildings,• To introduce legislation pertaining to building design and use, particularly that concerned withsafety and comfort of occupants and the environment,• To develop an understanding of climate and microclimate, principles of environmental physics,properties of building materials and human comfort.
A series of lectures supports analytical activities and a design project that demonstrates principlesput into practice.
3. Outline Syllabus
Substructure, foundationStructure, principles, load-bearing, frame, special architectural structuresWalls, masonry and timber frame construction, damp proof courses, window and door typesFloors, concrete and timber, ground and upper, damp proof membranesStairs, design considerations, types of layout, statutory requirementsRoofs, flat and pitched in timber, structure, weatherproofing, insulation, decay, condensation, fire,coverings, rooflightsFinishes, internal floors, walls and ceilings, external renders, paints, stains
Document Generated on 9 September 2015Page 1/3
University of Lincoln Module Specification - Buildable, Habitable Design 2015-16
Design with climate, building bioclimatologyBuilding form & shapePassive solar designDesign for daylight and sunlightThermal comfortHeat transfer (steady state)Ventilation, infiltrationAcoustics, noise transferServices, hot and cold water supply, drainage systems, typical layouts, disposal methodsAnthropometricsSpatial and ergonomic design, fitness for purposeLayout of internal fixtures and fittings for effective use and operationConsideration of operational factors such as durability, cleaning and maintenance
4. Module Learning Outcomes
LO1 Demonstrate analysis of building materials and construction processes in precedentstudies related to the development of design projects.
LO2 Demonstrate analysis of anthropometric, ergonomic, access and escape factors inbuildings.
LO3 Illustrate the mechanisms of heat transfer under steady state conditions.LO4 Identify the factors that influence the experience of thermal, visual and aural comfort in
buildings.LO5 Demonstrate the principles of passive solar design in a design project.LO6 Identify strategies for structure, materials, construction, environmental design and detail
design in design projects.LO7 Communicate strategies and details through physical models, detailed construction
sections and detail drawings.
5. Learning and Teaching Strategy/Methods
Lecture series, studio work, group tutorials, crits, workshops, reading, open learning packages andsite visits, as appropriate.
6. Assessment
Coursework: 100% Coursework Assessment will be through project assignments presented in anexhibition context. That is, specified exhibition material together with a portfolio and sketchbookincluding preliminary studies and design development work. All assignments contribute to the modulemark reported to the exam board.
Document Generated on 9 September 2015Page 2/3
University of Lincoln Module Specification - Buildable, Habitable Design 2015-16
Assessment Method Weighting (%) Learning Outcome(s)Tested
Group Work
Coursework 100 LO1, LO2, LO3, LO4,LO5, LO6, LO7
No
7. Professional, Statutory and Regulatory Body Requirements
The module is part of the BA (Hons) Architecture course leading to exemption from Part 1 of theExamination in Architecture under the Architects Registration Act and EU legislation.
8. Indicative Reading
Powered by TCPDF (www.tcpdf.org)
Document Generated on 9 September 2015Page 3/3
