DWA

Redundant Reverse Osmosis System

[ modula S-XL ]

Safety and reliability

The effective concept of modula S with high quality of all components and proven DWA-reliability have been used and advanced in the design of modula S-XL.

Special attention has been given to operating noise minimization of the reverse osmosis. Two submersible pumps in the break tank al-low for low-noise operation of modula S-XL in proximity to the treatment places.

The redundant configuration of modula S-XL ensures both high permeate capacity and highest operational safety and reliability of the permeate production.

The consumption controlled water saving technology – Eco-Mode – assures optimized water consumption and therefore contributes significantly low operating costs.

High permeate flow – silent, secure and economical

[ modula S-XL ]

High permeate flow and operational safety

• Water-saving technology by combined conductivity and temperature control

• Continuous monitoring of conductivity, pressure, temperature and permeate flow

• In case of electronics failure an emergency mode allows dialysis to be continued

• Automatic restart in case of power interruption up to five minutes duration

• Regulation of the required permeate volume via intelligent consumption control (Eco-Mode) of the pumps

• Easy and quick access to all components to ease service and reduce maintenance costs

• Secure menu for service technicians and 64 status messages memory capability

• Hygienic permeate pressure sensor mounting minimizes bacterial contamination

• Internal surface of passivated stainless steel piping with clamp connectors make the modula S-XL hygienic and optimizes serviceability

Functional elaborated to the detail

• Compact and modular design for require-ments from 700-3500 l/h

• Two independent submersible pumps and module lines for secure permeate supply

• Fully or partially redundant operation • Energy-saving polyamide membranes for

maximum permeate yield at low pressure• Simplicity of operation with integrated self-

test at unit powerup and status-dependent user guide

• Stainless steel fittings matching pharma- ceutical requirements

• Permeate pressure sustaining and over- pressure valve

• Dead leg free stainless steel module pressure vessels for maximum hygiene

• Hygienic stainless steel permeate sampling point

ww

w.3

we.

de 1

509

The Dialysis Water Specialists

DWA

DWA GmbH & Co. KGGroßer Sand 8

76698 Ubstadt-Weiher

Phone: +49 7251 6900-0Fax: +49 7251 6900-115

info@dwa-online.com

www.dwa-online.com