ModEva 15T - hesse-maschinen.com · The Intuitive Programming ModEva 15T Synchronized Press Brakes...
3
The Intuitive Programming ModEva 15T Synchronized Press Brakes ModEva 15T is a sleek design numerical control, which can be adapted to simple as well as to sophisticated press-brakes, with up to 18 axes. With its large 15" Touch Screen and single page programming, setting up the bending of a part is very easy, comfortable and requires very little time. The software enables manufacturers to configure axes, inputs/outputs and auxiliary functions according to their needs. It also allows quick and user friendly programming of simple boxes and similar 3D parts. ModEva 15T can manage sophisticated features such as complex bending aids, angle measurement, slave axes, etc.
Transcript of ModEva 15T - hesse-maschinen.com · The Intuitive Programming ModEva 15T Synchronized Press Brakes...
The Intuitive Programming
ModEva 15TSynchronized Press Brakes
ModEva 15T is a sleek design numerical control, which can be adapted to simple as well as to sophisticated press-brakes, with up to 18 axes.
With its large 15" Touch Screen and single page programming, setting up the bending of a part is very easy, comfortable and requires very little time.
The software enables manufacturers to configure axes, inputs/outputs and auxiliary functions according to their needs. It also allows quick and user friendly programming of simple boxes and similar 3D parts.
ModEva 15T can manage sophisticated features such as complex bending aids, angle measurement, slave axes, etc.
Easy operating, better bending and powerful features all characterize
ModEva 15T
Easy Operating
• Its large 15" color Touch Screen makes programming more efficient and intuitive.
• Quick set-up of the machine thanks to direct access to set-up.
• Optional auxiliary panel for machine commands (push buttons, switches) ideally located under the keyboard.
Better Bending
• The numerical control comes with off-line PC 1200 software to prepare production programs and check the feasibility of parts on a desktop computer.
• Higher productivity thanks to easy and rapid modifications of existing products and fully featured correction page.
• Display of error and warning messages on the console screen.
Powerful
• Can control up to 18 axes.• Multi-simulation capability with
collision detection, definition of the tools and the position of the sheet between the tools, offering several solutions for optimal bending sequences.
• Extended simulation criteria for better sheet management such as: - Minimum length against the
operator. - Minimum return. - Maximum accuracy between
two defined faces. - Minimum operator
manipulation.• Windows XPe for multitasking and
file management.• EC safety-cycle management.• Ethernet for workshop networking.• Management of sophisticated
features such as complex bending aids, angle measurement, slave axes, etc.
HESSE+CO Maschinenfabrik GmbHIndustriezentrum NÖ-SüdStraße 4 - Objekt 8A-2351 Wiener NeudorfAUSTRIA
Tel.: +43/2236/638 70-0Fax: +43/2236/636 62
www.blechpower.com
Vertrauen Sie auf 70 Jahre Erfahrung!
Die Firma HESSE+CO wurde 1947 als Hersteller von Blechbearbeitungsmaschinen gegründet. Seit 1980 sind wir auf den Handel mit neuen sowie gebrauchten Blechbearbeitungs- und Werkzeugmaschinen spezialisiert. Wir haben ständig etwa 300 Maschinen in unserer 2.000 m² großen Ausstellungshalle, die nur 20 Minuten vom internationalen Flughafen Wien entfernt ist.
Trust in 70 years of experience! HESSE+CO was established in 1947 as a manufacturer of sheet metal working machines. Since 1980 we are specialized in dealing with new and second hand sheet metal processing machines and machine tools. We always have approximately 300 machines available in our 2.000 m² showroom, which is located only 20 minutes from the Vienna International Airport, waiting for your inspection.
Technische Änderungen, Irrtum und Druckfehler vorbehalten.Gültig bis auf Widerruf.
www.hesse-maschinen.com
TÄGLICH AKTUALISIERTE LAGERLISTE UNTER www.hesse-maschinen.com
Ihr Partner seit 1947
