MITAC PD10BI BIOS settings notes + Fix display problems · MITAC PD10BI BIOS settings notes + Fix...
4
MITAC PD10BI BIOS settings notes + Fix display problems When having boot problems you can fix them by setting the correct OS type in BIOS. Enter BIOS by pressing „DEL“ button at boot time. Go to section „Save & Exit“ Choose your OS and confirm with „Enter“ button.
Transcript of MITAC PD10BI BIOS settings notes + Fix display problems · MITAC PD10BI BIOS settings notes + Fix...
![Page 1: MITAC PD10BI BIOS settings notes + Fix display problems · MITAC PD10BI BIOS settings notes + Fix display problems When having boot problems you can fix them by setting the correct](https://reader030.fdocuments.in/reader030/viewer/2022040104/5f06ff667e708231d41ac8bb/html5/thumbnails/1.jpg)
MITAC PD10BI
BIOS settings notes + Fix display problems
When having boot problems you can fix them by setting the correct OS type in BIOS.
Enter BIOS by pressing „DEL“ button at boot time. Go to section „Save & Exit“
Choose your OS and confirm with „Enter“ button.
![Page 2: MITAC PD10BI BIOS settings notes + Fix display problems · MITAC PD10BI BIOS settings notes + Fix display problems When having boot problems you can fix them by setting the correct](https://reader030.fdocuments.in/reader030/viewer/2022040104/5f06ff667e708231d41ac8bb/html5/thumbnails/2.jpg)
Go to section „Chipset“ and choose „Output Panel Type“.
If you didn’t installed your OS by UEFI then set this key to „eDP“.
Save settings with „F4“ button.
![Page 3: MITAC PD10BI BIOS settings notes + Fix display problems · MITAC PD10BI BIOS settings notes + Fix display problems When having boot problems you can fix them by setting the correct](https://reader030.fdocuments.in/reader030/viewer/2022040104/5f06ff667e708231d41ac8bb/html5/thumbnails/3.jpg)
No display output problem
„Clear CMOS“ by setting jumper below to “Clear CMOS” position and back.
![Page 4: MITAC PD10BI BIOS settings notes + Fix display problems · MITAC PD10BI BIOS settings notes + Fix display problems When having boot problems you can fix them by setting the correct](https://reader030.fdocuments.in/reader030/viewer/2022040104/5f06ff667e708231d41ac8bb/html5/thumbnails/4.jpg)
The system now should show display output again.
02.07.2014, CarTFT.com