MiraStamp - Miracote · Designed for use with conventional concrete stamping tools and techniques,...
Transcript of MiraStamp - Miracote · Designed for use with conventional concrete stamping tools and techniques,...
MiraStampTwo-component, polymer-modified, cementitious thin-stamped concrete overlay
Designed for use with conventional concrete stamping tools and techniques,
Mirastamp restores, transforms and beautifies old existing concrete and
other compatible substrates that call for a new distinctive look. This two-
component, polymer-modified, thin-stamped architectural overlayment can
simulate virtually any impression, pattern or texture utilizing commercially
available concrete stamps.
With excellent adhesion, freeze/thaw resistance, compressive, tensile and
flexural properties, Mirastamp provides the optimal durability and wear for
both interior and exterior applications in any climate. Whether exposed to
pedestrian or vehicular traffic, Mirastamp is an ideal solution for renovating
concrete where performance and years of service life are key requirements
for your project.
Renovate and Overlay Concrete with the Beauty of Mirastamp
Product Features• Two-component, high polymer-
to-cement ratio
• Tenacious adhesion to concrete and other substrates
• Outstanding salt & freeze thaw resistance
• Excellent resistance to impact and abrasion
• Ideal for interior and exterior applications
• Suitable for both pedestrian and vehicular traffic
• Extensive range of designs, colors and textures
• Easy to install using conventional stamping tools
Crossfield Products Corp. | miracote.com | 800.692.3502 | [email protected]
MiraStamp can be installed anywhere from !” to 5/8” depending on the pattern of the desired impression and required concrete stamp mat. Available in a standard off-white powder, MiraStamp can be integrally colored with Miracote ColorPax LIP pigment packs, stained with the use of our architectural water-based, co-polymer Mirastain, or both pigmented and stained to achieve diverse and unique architectural finishes. Seal and protect your finished MiraStamp with a clear Miracote sealer or topcoat of your choice from a wide range of acrylic, siloxane and polymeric scientifically superior sealer and coating technologies from Crossfield Products Corp.
West Coast Facility
3000 E. Harcourt Street
Rancho Dominguez, CA
90221
P: 310.631.6594
F: 310.886.9119
East Coast Facility
140 Valley Road
Roselle Park, NJ
07204
P: 908.245.2808
F: 908.245.0659
Crossfield Products Corp.miracote.com
800.692.3502
MiraStampTwo-component, polymer-modified, cementitious thin-stamped concrete overlay
Don’t replace it – Miracote It!Product Applications• Resurface and restore
concrete• Deferred concrete floor
toppings• Commercial, retail &
residential flooring• Educational & institutional
facilities• Food & beverage areas• Hotels and resorts
Where to Use• Pedestrian walkways• Atriums & courtyards• Driveways & porte-cocheres• Balconies & breezeways• Pool decks and promenades• Plaza decks• Foyers and entryways
to learn more about miracote
coatings and membranes