MINI DSG Reader DQ200+DQ250 Installation Manualforobd2tool.com/wp-content/download/MIni DSG Reader...
Transcript of MINI DSG Reader DQ200+DQ250 Installation Manualforobd2tool.com/wp-content/download/MIni DSG Reader...
MINI DSG Reader DQ200+DQ250 Installation Manual
Step 1: Copy the software in the CD, paste them to your local
disk.
Step 2: Disable all Network Connection, including: the local
area connection, wireless network connection and 1394
connection.
Step 3: Open the MINI DSG Reader folder, click “run me first
registration entries”, and a windows dialogue popup reading:
Registry Editor„, click OK.
Step 4: Click icon “DSG Reader” and a windows dialogue popup
displaying License expired, click OK, then another one popup showing
machine ID, press “ctrl+v” to paste, and click OK.
Create one txt file in the desktop and into it paste the machine ID, then
send it to your seller for activation.
Step 6: your seller send back the license file activated, cut it and paste it
in to the Mini DSG reader folder.
Step 7: right click the green icon “DSG Reader” to open it, then close the
appeared screen, and again right click “DSG Reader”-send
to-Desktop(create shortcut)
Step 8: connect the DSG reader to the computer and the car, then it will
popup windows “ found new hardware”, step-to-step to install it.
Step 9: click “my computer-device manager”, if you find “USB OBD II
cable”, it means the computer and the DSG reader establish
communication.