Milestone TCIT Match Software · 2014-12-17 · data loss. TCIT disclaims any ... There are two...
Transcript of Milestone TCIT Match Software · 2014-12-17 · data loss. TCIT disclaims any ... There are two...
Milestone_TCIT Match Software Prepared on11/24/2014
User Manual
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
2 2
Trademarks
“TCIT” and “TCIT logo” are registered trademarks of Taiwan Colour & Imaging
Technology Corporation. Microsoft product names such as Microsoft and Windows in
this software instruction document are either trademarks or registered trademarks of
Microsoft Corporation. Other company names and product names are likewise
trademarks or product names of their respective companies.
Revision History
Date Revision Content Prepared by
2014/11/11 v.1.0.0.1110 Robert Lee
2014/11/19 v1.0.0.1112-1. Robert Lee
2014/11/25 v1.0.1.1120 Robert Lee
Intellectual Property Rights Information
TCIT shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from furnishing this material.
The information is provided “as is” without warranty of any kind and is subject to
change without notice. TCIT also reserves the right to revise the content of this
document at any time without prior notice. No part of this document may be
reproduced or transmitted in any form or by any means, or translated into any
language in any form without prior written permission of TCIT.
Disclaimer
In no event shall Taiwan Colour & Imaging Technology Corporation (TCIT) liability
exceed the price paid for the product from direct, indirect, special, incidental, or
consequential damages resulting from the use of the product, its accompanying
software, or its documentation. TCIT makes no warranty or representation, expressed,
implied, or statutory, with respect to its products or the contents or use of this
documentation and all accompanying software, and specifically disclaims its quality,
performance, merchantability, or fitness for any particular purpose. TCIT reserves the
right to revise or update its products, software, or documents without obligation to
notify any individual or entity. Back up the system periodically to avoid any potential
data loss. TCIT disclaims any responsibility of any sort of data loss or recovery.
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
3 3
Before using TCIT Match
To initially use the TCIT Match plug-in for the Milestone XProtect® Series, please
install one of the XProtect Series products and the Smart Client first. You will see the
following icon after installing the XProtect Series:
TCIT Match is compatible with the following versions of XProtect.
1. XProtect Corporate
2. XProtect Expert
3. XProtect Enterprise
4. XProtect Professional
5. XProtect Express
Milestone XProtect Smart Client 2014
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
4 4
Server
Click the Milestone XProtect Management Application
Add New Hardware Device
There are two ways to scan for hardware
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
5 5
Scan for hardware
Click Next
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
6 6
Scan for device is successful
Manually specify the hardware to add
Click “Next”
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
7 7
Searching for & connecting the IP camera
Connecting completed
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
8 8
Click “Camera 1” below the “Camera & Storage” Information folder
If the connection to the IP camera in real time is successful, click ”Save”.
Click ”Server Access” to set the server IP address
Fill in the server IP address and all other requested information
Click “OK”
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
9 9
Then click “Save”
Add New Basic User
Fill in all the requested information
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
10 10
Click “OK”
Click “Save”
Make sure “Service Control” statuses are all started
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
11 11
Right click to create a new plugin name for the level below the TCIT Match
folder
Type the new plugin name
After setup, the new plugin name will appear as shown in the screen below
Double-click “tcit” (the new plugin name) to start the new software license activation
process
TCIT Software License Activation
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
12 12
For users with first time license activation, you will see the following message:
“Service failed, please input the correct serial numbers”. When the notification
appears, please click “OK”.
“TCIT License Manager” process set up
In order to activate the software license, the “TCIT License Manager” window will
automatically appear. To continue, please choose “TCIT Search” in the “Select
Product” scroll list, then fill in the “License Key” and click “Activate”.
Note:Internet connection is required for license activation.
Once the license is activated, you can close the window and start using TCIT Search
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
13 13
Enrolling Photos into the Database
Click “Enrollment”
Click “By Picture” and chose the pictures as shown below
TCIT Match allows picture sources as well as video sources for database enrollment.
Click “OK” & “Finish” to complete the enrollment process
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
14 14
Editing and Searching the Enrolled Database
Click “Database”
Select the query field (UID / Name) & type the information in the “input
keyword” blank
Chose Range of time
Click “Search” to see all the database information.
Edit and/or Delete Individual Records in the Database
Choose one of the enrolled subject’s information & right click the mouse as
shown below
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
15 15
Edit the Database Record
Click “Edit” so you can edit the fields for Name, Spare1, Spare2, Spare3 &
Remarks in the blank fields
Delete—Choose one of the enrolled records you want to delete
Click “Clear all”—If you click “Yes”, it will clear all the data in the database.
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
16 16
Click “Setting”
Click Camera
Click “Add Camera” & click the camera number of the recognized camera
Setting the Camera (When you click the “Setting” black button, it will become
red so you can set and see the camera image in real time)
Human faces in front of the camera will then be recognized in the database
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
17 17
Click “Threshold”
Security level options: Low, Middle or High
The recommended value: Low
Confidence: 0-1000
The recommended value: 500
Pitch: 0-90 allows the angle of the face detection range up and down
Yaw: 0-90 allow the angle of the face detection range right to left
Pitch & Yaw recommended value: 20
Face size: Allows the face detection pixels range
The recommended value: 64
Click “Log”
Select the query field
Chose Range of time
Click “Search” to show all logs
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
18 18
To clear all logs, click “Clear all” & “Yes”
Click “OK”, to clear all the logs
Setting the Event Name
Click “Setting”, and then click “Threshold”/Event Name
Type the event name (TCIT) in the “Event Name blank” then click “Save”
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
19 19
Click the “+“ sign in front of Events and Output, then click “Analytics Events” & “Create
New”
Type the name “TCIT” in the “Name blank”, then click “OK”
Click the “+” sign in front of “Analytics Events”, and the name “TCIT” will now appear
below “Analytics Events”
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
20 20
Click “+” in front of Alarms, then click “Alarm Definitions” to “Create New”
Chose “Analytics Events” in the first Triggering event blank.
Chose the “Analytics Events” name TCIT in the second Triggering event blank
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
21 21
Click “Select”
Click “+” in front of Server, then click “+” in front of All Cameras (Server)
Click the Camera number that you want to use, and then click “Add”
The camera number will appear in the Selected blank, then click “OK”
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
22 22
Click “OK”
Click “+” in front of Alarm Definitions, then Alarm Definition will appear below Alarm
Definitions
Click “Options”, then click “Settings…”
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
23 23
When the “Settings” window appears, then click “Analytics Events”. Make sure to
check Enabled & set the Port blank number as the same number as the Event port
number in the Setting window. Click “OK” to set up.
Client
- Configure Setup Prior to Matching
Click “Alarm Manager”. Then click “New” to see TCIT Match alarm logs. Click the
log to replay the video of the event.
Milestone_TCIT Match Software Instructions Document
© TCIT 2014 All Rights Reserved
24 24
TCIT
www.tcit-us.com | www.tcit-tw.com