MIL-STD-1553 Mini PCIe Reference Design
Transcript of MIL-STD-1553 Mini PCIe Reference Design
Features
● Mini PCIe F2 full size ● PCIe gen2 single lane ● Linux OS ● Single or Dual Channel ● Mini Card Electromechanical Specification Rev. 1.2
● Two independent dual-redundant MIL-STD 1553 channels using Holt’s proven HI-2130
● Each channel with BC, 2xRT and MT ● Transformer coupled MIL-STD-1553 interface
● Holt API Library support ● -40°C to +85°C operation ● Customizable FPGA ● Demo software for BC, RT1, RT2 and MT
General Description
OverviewThe Application Development Kits ADK-2130mPCIe-1F and ADK-2130mPCIe-2F provide full size F2 mini PCIe reference designs, supporting one (-1F) or two (-2F) dual redundant channels of MIL-STD-1553. The mini PCIe card features one or two Holt HI-2130 MIL-STD-1553 multi-terminal devices with integrated transformers and a PCI-Express interface designed using a small cost effective Xilinx Artix-7 FPGA. The reference design includes a schematic, BOM, board layout files, PCIe interface FPGA source code, Holt API library and a sample project, enabling the user to easily port this solution to existing designs or boards.
The mini PCIe card is designed to operate in a PC or single board computer with a Linux operating system. The included demo software uses the Holt API Library functions, providing an abstraction layer that greatly simplifies host programming.
The kit also includes a separate break-out board which connects to the PCIe card through a ribbon cable and includes cables and connectors for direct connection to the MIL-STD-1553 bus (note: connection should be made to MIL-STD-1553 bus couplers for correct bus termination). This board is used to break out BusA and BusB connections from both channels.
A bootable Flash Drive and Quick Start Guide provide an out-of-the box experience, enabling the user to get up and running very quickly.
MIL-STD-1553 Mini PCIe Reference DesignSingle Channel ADK-2130mPCIe-1F, or Dual Channel ADK-2130mPCIe-2F
to break-out boardbus connection(ribbon cable included with break-out board)
EV-2130mPCIe-2F mini PCIe card
Functional Block Diagram
23351 Madero, Mission Viejo, CA 92691-2730
Tel: +1 (949) 859-8800 Fax: +1 (949) 859-9643Email: [email protected] Web: www.holtic.com Rev. 01/22/20
ADK - 2130 mPCIe - xF
1F = Single channel dual redundant2F = Dual channel dual redundant
mPCIe = Mini PCIe F2 full size, PCIe gen2 single lane
2130 = BC/MT/2RT, 64K byte ECC RAM
Application Development Kit including corresponding breakout board cable assembly and ribbon cable (mPCIE_breakout-xF)
Ordering InformationBreak-out boardprovides out-of-the-boxbus connections
Tripple BUCKPower supply
LTC3545 (1 spare)
3.3VMOSFET
switch
Quad SPIFLASH
4x4
JTAG8 pin
toFPGA
3.3aux
VCCINT 1V
MGTAVCC1V
VCC1.8V(JTAG)
VCCO3V3
Xilinx ARTIX-7XC7A127-2CPG2381
10 x 10
(6) Int, int, RTxMC8
.
3.3aux
6 x LED’s:done, init_b,
rst, urst, pcie_link, heartbeat
Ban
k 34
HI-2130-2
PCIe TX, RX, REFCHK
Ban
k 14
B
ank
16
JTAG, Misc Bank 0
ACTIVE TP
1Vreg
MGTAVTT1V2
1V5
GOOD
1V5
J4
PCIex1 lane
52 pinPCIeconn.
100 MHzMEMSOSC
2 x 1.6Optional
TBD
Ban
k 14
1Vreg
HI-2130-1
14.99 mm sq.
(36) 16 bit address/data EBI
nCS, nWE, nRD, TEST, MCLK, nMRTXINHA/B
TXHIBx, BCENA, BCTRIG and 1553 BUS
EV - 2130 mPCIe - xF
1F = Single channel dual redundant2F = Dual channel dual redundant
Evaluation board only(Note: This board does not include the breakout board cable assembly or ribbon cable (mPCIE_breakout-xF)