Microwave occupancy sensors
Click here to load reader
-
Upload
anton-burridge -
Category
Environment
-
view
89 -
download
0
Transcript of Microwave occupancy sensors
![Page 1: Microwave occupancy sensors](https://reader038.fdocuments.in/reader038/viewer/2022100807/58adabca1a28ab73138b511f/html5/thumbnails/1.jpg)
© September 2015| Green Energy Management (GEM) | All Rights Reserved |City & Guilds Qualified|W :gemlightingandelectrical.com
Microwave Occupancy Sensors
Microwave sensors - The latest generation of presence control and energy saving lighting.
Controlling lighting with a presence detector can save up to 60% of lighting energy costs dependant
on occupancy behaviour and the amount of natural light available, and even more savings if you
went LED. Ideal for installing in stairways, corridors and communal areas. Can either be installed into
original fittings (Retro refit) or as a new fitting (LED fitting).
I. Retro Refit Microwave occupancy sensor
More efficient than time lag switching, every time a switch is used the lamp uses more energy to
strike up, where as these microwave sensors run constantly at 5% dependant of ambient Lux levels,
when the sensor picks up movement the light will then go to 100% then dim back down when no
movement is detected. Installing these in your original light fittings will save you money on your
energy bills and could also raise the EPC (Energy Performance Certificate) of the building. As from
April 2018 it will be against the law to rent out a premise with an EPC lower than grade E.
Retrofit sensor mounts inside existing fitting saving cabling and redecoration costs
High sensitive microwave technology
Switches all types of lighting including low energy
Can be used with maintained emergency lighting
1 year guarantee
II. LED 16W Bulkhead with microwave occupancy sensor
Maintenance free LED lighting with microwave occupancy sensor already installed into the fitting,
very efficient running at 16 watts. This bulkhead would normally be replaced for the very similar 28
watt bulkhead.
Polycarbonate base and diffuser
IP65 ingress protection
Microwave sensor
Maintained LED emergency fittings available
3 year guarantee