Micro Irrigation - Philmac · 2020. 10. 30. · Micro Irrigation Pressure Compensated Sprays NEW....
Transcript of Micro Irrigation - Philmac · 2020. 10. 30. · Micro Irrigation Pressure Compensated Sprays NEW....
Micro Irrigation
Pressure Compensated
Sprays
NEW
Innovation at it’s best.How you use your water is now under more scrutiny then ever before, so any innovation that as-sits in intelligent water use is a welcome addition.
Philmac are proud to release a range of pressure compensated spray jet products, that make intelligent water use even easier. Utilising advanced pressure compensating technology, these jets make irrigation system design, installation and use is now even easier, more water efficient and more intelligent.
WHY IS PRESSURE COMPENSATION SO IMPORTANT?With increased water restrictions, intelligent use of water in a cost effective manner becomes even more important. Pressure compensation allows for a system to offer consistent perfor-mance irrespective of the water pressure. This simplifies the design and installation process, reduces costs of the system and makes ongoing use even more reliable and easier.
FEATURES & BENEFITS
THE RANGE:
Ottima 3600 PC End-Line Spike
Vortex 3600 PC End-Line Spike
PC Spray JetsAssembled
Page 2 Page 3 Page 4
Ottima 3600 PC End-Line Spike
OPERATIONUses innovative Pressure Compensating (PC) technology in a spike emitter to deliver 40 litres/hour with uniform output flow rate and diameter of throw when the inlet pressure of the supply system varies.
PRODUCT FEATURESInnovative pressure compensating technology to deliver uniform output flow rates •and diameter of throw irrespective of system pressure8 stream watering pattern •40L/h (Blue) pressure compensating performance•Colour coded for easy identification•Manufactured on a 150mm stability spike•Manufacturered from durable thermoplastics with UV, chemical and corrosion •resistanceRemovable cap for cleaning•
GENERAL APPLICATIONSUse for watering plants in small or large pots, garden beds and landscaped areas.
NEW
0.0
0.1
0.2
0.3
0.4
0.5
150 200 250 300
Dia
met
er o
f Thr
ow (m
)
Pressure (kPa)
Ottima 360° PCMetric Units
Blue
Vortex 3600 PC End-Line Spike
OPERATIONUses innovative Pressure Compensating (PC) technology in a spike emitter to deliver 50 litres/hour with uniform output flow rate and diameter of throw when the inlet pressure of the supply system varies.
PRODUCT FEATURESInnovative pressure compensating technology to deliver uniform output flow rates •and diameter of throw irrespective of system pressureVortex watering pattern •50L/h (Green) pressure compensating performance•Colour coded for easy identification•Manufactured on a 150mm stability spike•Manufacturered from durable thermoplastics with UV, chemical and corrosion •resistanceRemovable cap for cleaning•
GENERAL APPLICATIONSUse for vegetable gardens, home gardens and nurseries.
NEW
0.5
1.0
1.5
2.0
2.5
3.0
3.5
150 200 250 300
Dia
met
er o
f Thr
ow (m
)
Pressure (kPa)
Maxima 360° PCMetric Units
Green
PC Spray JetsAssembled
OPERATIONUses innovative Pressure Compensating (PC) technology in a spray jet to deliver pre-determined performance with uniform output flow rate and diameter of throw when the inlet pressure of the supply system varies.
PRODUCT FEATURESInnovative pressure compensating technology to deliver •uniform output flow rates and diameter of throw irrespective of system pressureMatched precipitation •
360• 0 18 hole spray pattern at 80L/h (Red)180• 0 spray pattern at 40L/h (Blue)90• 0 spray pattern at 20L/h (Black)
Colour coded for easy identification•Manufacturered from durable thermoplastics with UV, •chemical and corrosion resistance
NEW
GENERAL APPLICATIONSGeneral watering of
landscaped areas and garden beds.
1.5
2.0
2.5
3.0
150 200 250 300
Rad
ius
of T
hrow
(m)
Pressure (kPa)
Micro Spray Jet PCMetric Units
180 Degree @40L/h
360 x 18 @ 80L/h
90 Degree @20L/h