Micro I Miniature terminal blocks From Phoenix...
-
Upload
truongkien -
Category
Documents
-
view
218 -
download
0
Transcript of Micro I Miniature terminal blocks From Phoenix...
Micro I Miniature terminal blocks From Phoenix Contact
General information
In order to suit the trendtowards smaller and smallerswitchboxes, above all in moderncontrol design, Phoenix Contactoffers miniature and micro terminalblocks . These terminal blocksprovide advantages wherever safewiring to suit applicationrequirements must be concentratedin restricted spaces . Greatimportance is placed on user-friendlyoperation and assembly. Potentialdistribution tasks can be realizedwith bridges as well as using multi-conductor terminal blocks . Allminiature and micro terminal blockscan be marked in different ways.
In addition to feed-throughterminal blocks, the product rangeincludes three and four-conductor aswell as ground terminal blocks,which can all be snapped onto NS 15rails .
The double-level terminal blocks,which lead to further space savings,can be mounted on the NS 15 as wellas the NS 35 rail.
The strip terminal blocks as wellas the device terminal blocks enableterminal blocks to be mounteddirectly as compact terminationblocks, e .g . on the walls of thehousing, independently of the DINrail.
302 Phoenix Contact
41' Alp 4a. .
"► `r, 'a♦, .t a 5i
MTMiniaturization has now made its
claim on the modular terminal block.The micro terminal blocks from theMT range feature an extremelycompact construction . The MT 1,5have a pitch of just 4 mm and aconnection cross section of 1 .5 mm 2 ,which means that the wiring of thecontrols takes up a minimum of space.
The current carrying capacity ofup to 17 .5 A means that wiring is evenpossible in the lower power spectrum.
Naturally, there is also a green-yellow ground terminal block with thesame shape . This contactsautomatically with the DIN rail whenit is snapped into place .
MT-TWINPower distribution is one of the
most common switching tasks incontrol system construction.
With the MT 1,5-TWIN, the hugesuccess of the great twin terminalblock is now also possible for themicro modular terminal block range.
The winning features of theMT 1,5-TWIN and MT 1,5-TWIN-PE,the ground terminal block with thesame shape, are a single feed line, twooutputs and a constructional width of4 mm .
MTTB and MT-QUATTROThe MT 1,5-QUATTRO is the
next logical step up from theMT 1,5-TWIN.
One of its special areas ofapplication is for the connection ofdifferent types of conductors andcross sections . With two connectionseach for incoming and outgoing cablesas well as a bridging option in theterminal center, this double terminalblock has a wide spectrum ofapplication possibilities.
To take the idea of saving space toextremes, the micro terminal has evenbeen given a second level in theMTTB 1,5 version.
MBKThis range of products can be
divided into two types:The "small " miniature stripterminal blocks with variants forscrew, solder and 2 .8 mm slip-onconnection . The compact 5 mmwide enclosed insulation housingand the continuous strip design arecommon to all typesThe " larger " miniature terminalblocks which are available either inblocks of 10 or as single terminalblocks.All types up to 4 mm 2 are also
available with blue insulation housingsfor intrinsically safe circuits .
Miniature strip terminal blockMBK
These miniature terminal blocksare supplied as a continuous strip with200 terminal blocks, from which it ispossible to cut off terminal strips withany number of positions.
The terminal blocks are assembledby simply pushing them onto the small15 x 5 mm DIN rail in accordancewith EN 60 715.
In order to form groups within theterminal strips, these are cut at theappropriate point with a knife. Theterminal blocks are pushed slightlyapart and partition plate ATS-MBK isinserted, where it engages with thecam on the housing base .
Device terminal blocks,GSandG10
The main area of application ofthese compact termination blocks forrail-free mounting is with networkconnections for electrical andelectronic equipment as well as insmaller terminal boxes.
The G 5 device terminal blockscover the cross section range up to4 mm 2 with 2 to 12 positions.
The G 10 device terminal blockswith 2 to 5 positions cover the crosssection range up to 10 mm 2 .
Each terminal point of G 5 and G 10terminal blocks can be individuallylabeled using the proven BN markingsystem .
Phoenix Contact 303
MICRO-TERMINAL MT 1,5
The MT 1,5 micro terminals, with theircompact design, do justice to the growingdemand for ever smaller switchboxes.
The miniature terminal blocks haveeverything that makes the modular terminalblocks stand out:
A constructional width of only 4 mmA nominal cross section of 1 .5 mm2A snap-on foot for NS 15 DIN railsA multitude of possibilities for markingandA bridging possibility in the terminalcenter.Power distribution is one of the main
tasks of modular terminal blocks in controldesign.
With the MT 1,5-TWIN orMT 1,5-QUATTRO three or four-conductor terminal blocks, this task can berealized within a very restricted space . Allmicro terminals can be bridged in theterminal center, providing an additionalpossibility for power distribution.
The double-level micro terminal,MTTB 1,5, takes space-saving to theextreme. Also only 4 mm wide, this double-level terminal block contains twoindependently bridgeable through levels.The MTTB 1,5 can not only be mounted onthe 15 mm DIN rail, but also on the 35 mmDIN rail .
Terminal block, for mounting onNS 15 in accordance with EN 60 715
GrayBlue
Double-level terminal block, withuniversal foot, for mounting on NS 15 or
GrayNS 35 in accordance with EN 60 715
Blue
(1) Cover
GrayBlue
(2) Fixed bridge, for cross connections in theterminal center, 10-position, divisible, with 10screws
(3) Spacer cover, compensates for leveloffset if standard terminal blocks are to
Graybe fitted adjacently. 2 mm thick
(4) Spacer plate, compensates for leveloffset if standard terminal blocks are to
Graybe fitted adjacently, 2 mm thick
Screwdriver
(5) Zack marker strip, flat, forlabeling the outer marker grooves
White
DimensionsWidth / length / cover width [mm]Height (NS 35/7 .5 / NS 35/15 / NS 15) (mm]Technical data in accordance with IEC /DIN VDEMax. load current / cross section [A] / [mm2]Rated surge voltage / contamination class [kV] / -Surge voltage category / insulating material group - / -Connection capacityStranded with ferrule without / with plastic sleeve [mm']Multi-conductor connection (2 cond . with same cross section)Solidi stranded [mm , ]Stranded with ferrules without plastic sleeve [mm2]Stripping length [mm]Internal cylindrical gauge (IEC 60 947-1)Thread
Torque [Nm]Insulation material
Inflammability class in ace . with UL 94Approval data (UL/CUL and CSA)
Nominal voltage r current conductor sizes
ULJCUL : [V] / [A] / AWGCSA : [V] / [A] / AWG
MT 1,5
. .r",nal width 4 .2'IEC)
rigid flexible I U[mm 2]
solid stranded AWG
[A] [V]
IEC 60 947-7 . 1
0 .14-1 .5 0.14-1 .5 26-16
17 .5 400
j K€CAI CCA B
P
Type
e['i BV/LR/NV
Order No . Pcs.
MT 1,5
PM.
5031 00 30 5MT 1,5 BU 30 03 36 3 50
D-MT 1,5 31 00 32 1 50D-MT 1 .5 BU 30 25 52 9 50
FBRN 10-4 N I,,, e , :
12 A 30 01 62 4 10
SZS 0,4 x 2,5
12 05 03 7
10
ZBF 4 (for order data, see page 400)
4 .2/22/1
17 .5/1 .54/3III /
0 .25-0.75/0 .25-0 .75
0 .14-0.5/0.14-0 .50 .25 - 0 .34
6Al
M20 .22 - 0 .25
PA
VO
300/15/30-14300115 /28-14
ColorDescription
304 Phoenix Contact
MT 1 .5-TWINTwin terminal block . bridgeable
Terminal width 4.2[X-C)
rigid
flexible
I
U(A111~]
solid
stranded
AWG
[A]
[V]
EC60947-7-1 0.14-1 .5 0 .14-1 .5 26-16 17 .5') 400'The max . load current must not be exceeded by the total current
Ball connected conductors.
@ K[ ]] CCA B P B~ 8V/LP/NV
type
MT1,5-TWIN
3001682
50YT 1,5-TWIN BU
30 25 53 2
50
DMT 1,5-TWIN
30 02 97 9
5004A1 1,5-TWIN BU
30 25 54 5
50
FERN 10-4 N
I,,,, : 12 A
SZS 0,4 x 2,5
ZDF 4 (for order data, see page 400)
4 .2/28/1
-/-/30
17 .5 / 1 .54/3
III / I
0.25 - 0 .75 / 0 .25 - 0 .75
0 .14-0 .5/0 .14-0 .50 .25 - 0.34
6Al
M20 .22 - 0 .25
PA
VO
300/15/30-14300/15/28-14
MT 1 .5-QUATTRODouble terminal block, bridgeable
Terminal width 4 .2(IEC)
rigid
flexible
I
U[mm i ]
solid
stranded
AWG [Al
[V]
IEC 60 947-7-1
0 .14-1 .5
0.14-1 .5
26-16 161)
400') The max . load current must not be exceeded by the total current
of all connected conductors.
% SP KECGJ CCA B P
c1' BV/LR/NV
Type
I Order No.
MT 1 .5-OUATTRO
30 01 67 9
50MT 1,5-QUATTRO BU
30 25 15 0
50
4 .2/33 .5/1- / - / 30
16 / 1 .5
4/3III / I
0 .25-0 .75/0 .25-0 .75
014-03/0 .14-03
025-034
6Al
M2022-025
PAVO
300/15/30-14
300/15/28-14
MTTB 1 .5Double-level terminal block, bridgeable in both levels
Terminal width 4 .2
(IEC)
rigid
flexible
I
U[mm''[
solid
stranded
AWG [Al
[V]
IEC 60 947-7-1
0.14-1 .5
0 .14-1 .5
26-16 17.5
400
SP B r
sit BV/LR!NV
Type
Order No.
1414129
5030 00 92 6
50
30 02 66 5 I
50
I,,.a, : 12 A
30 01 62 4
10
30 02 67 8
50
30 02 68 1
50
1205037
10
173/1 .5
4/301/1
0 .25 - 0 .75 / 0 .25 - 0 .75
0 .14-0 .5/0 .14-0 .5
0 .25 - 0 .346
AlM2
0 .22 - 0.25PA
VO
300/15/30-14
300/15/28-14
Pcs.Pkt.Order No.
Pcs.Pkt.
D-MT 1 .5-QUATTRO
30 02 98 2D-MT 1 .5-OUATTRO BU
30 25 30 9
30 01 62 4
10
FBRN 10-4 N
12 05 03 7
10
SZS 0,4 x 2,5
12 A
ZBF 4 (for order data, see page 400)
Pcs.Pkt.
MTTB 1,5MTTB 1,5 BU
50
D-MTTB 1,550
30 01 62 4
10
FBRN 10-4 N
DG-MTTB 1,5
DP-MTTB 1,5
12 05 03 7
10
SZS 0,4 x 2,5
ZBF 4 (for order data, see page 400)
4 .2/44/141 148 .5 / 41
Phoenix Contact 305
MICRO-TERMINALground terminal blocks
The ground terminal blocks in the MicroTerminal block range are the same shapeand satisfy the stringent requirements of thestandard IEC 60 947-7-2 as a result of their:
- Low contact resistances– Yellow/green insulation housings– Corrosion-proof contact points– Captive clamping screws.
The most important single advantage ofthe micro ground terminal blocks is thattheir pitch matches that of the feed-throughterminal blocks with the same cross section.This saves space and simplifies marking .
MT 1,5-PE
Terminal width 4 .2
(IEC)
rigid
flexible[mm2]
solid
stranded
AWG
IEC 60 947-7 .2
0.14-1 .5
0.14-1 .5
26-16For current carrying capacity of DIN rails . see page 499.
SP 'HE=j CCA B
P
' BV/LR/NV
Color Type Pcs.Order No .Pkt.
Green-yellow MT 1,5-PE 31 00 31 8
50
White
SZS 0,4 x 2,5
ZBF 4 for order data, see page 400)
12 05 03 7
DimensionsWidth i length [mm] 4 .2 / 22Height INS 15) [mm] 23.5Technical data in accordance with IEC / DIN VDERated surge voltage / contamination class [kV] / - 4/3')Surge voltage category / insulating material group - / - HI/IConnection capacity
Stranded with ferrule without / with plastic sleeve [mmd] 0.25-0 .75/0 .25-0 .75Multi-conductor connection (2 cond . with same cross section)Solid / stranded [mm'] 0.14-0 .5/0 .14-0 .5Stranded with ferrules without plastic sleeve [mm-] 0.25 - 0 .34Stripping length [mm] 6Internal cylindrical gauge (IEC 60 947-1) AlThread M2Torque [Nm] 0 .22 - 0 .25Insulation material PAInflammability class in acc . with UL 94 VOApproval data (UL/CUE and CSA)Conductor sizes UUCUL : AWG 30-14
CSA : AWG 28-14
-) When aligning with feed-through terminal blocks with the sameshape, an end cover must be interposed with insulation voltagesof > 320 V.
0-•-O
Description
Ground terminal block, formounting on NS 15 in accordancewith EN 60 715Screwdriver
Zack marker strip, flat, for labeling theouter marker grooves
306 Phoenix Contact
MT 1,5-TWIN-PE
MT 1,5-QUATTRO-PE
Terminal width 4 .2
;SEC)
rigid
flexible"p t2]
solid
stranded
IEC 60 947-7-2
0 .14-1 .5
0 .14-1 .5
Terminal width 4.2(IEC)
rigid
flexible(mm2]
solid
stranded AWG
26-16AWG
26-16 IEC 60 947-7-2
0.14-1 .5
0 .14-1 .5
Fa current carrying capacity of DIN rails, see page 499 . For current carrying capacity of DIN rails, see page 499.
SP KE[R_ CCA B
P
aC BV/LA/NV
typePcs.Pkt .
% SP K) JCCA `B
p
Bl BV/LR/NV
Type Order No . Pcs.Pkt.Order No.
P1,5-TWIN-PE 30 01 70 5 50 MT 1,5-OUATTRO-PE
30 01 69 5 50
SZS 0,4 x 2,5 12 05 03 7 10 SZS 0,4 x 2,5
12 05 03 7 10
ZBF 4 (for order data, see page 400) ZBF 4 (for order data, see page 400)
4 .2 / 28
30
4/3 1 )
III/I
0 .25-0 .75/0 .25-0 .75
0 .14-0.510.14-0 .5
0 .25 - 0 .34
6Al
M20 .22 - 0 .25
PAVO
30-1428-14
4 .2 / 33.5
30
4/3 1 )11111
0 .25-0.75/0 .25-0 .75
0.14-0 .5/0 .14-0 .5
0 .25 - 0.346
AlM2
0 .22 - 0 .25PA
VO
30 - 14
28-14
4
Phoenix Contact 307
Miniature terminal blocksMBK
The " larger " miniature terminal blocks,originally developed from the MBKminiature strip terminal blocks, round offthe upper range of the miniature terminalblock series for the 15 mm DIN rail.
Only the MBK 2,5/E single terminalblocks remind us with their design of theMBK strip terminal blocks . All " larger " MBKterminal blocks have a bridging possibility inthe terminal center, however, and can belabeled on the side with the ZB markingstrip (except for MBK 2,5/E) . Crosssections up to 6 mm 2 can be easily wiredwith these terminal blocks, since they areoptimized with regard to space, power andcross section.
Extensive bridging material such as fixedbridges, insertion bridges and switch barsenable simple and reliable powerdistribution . In addition to this, the range ofaccessories is sensibly rounded off withseparating plates, partition plates and testsockets .
Terminal block, for mounting onNS 15 in accordance with EN 60 715
GrayBlue
(1) Cover
n
g?p'}the terminal center. screw heads with insulating
II U) U U 0 )11 a 1.
collar, 10-position, divisible, with 10 screws
- I 'P'TI'
(3) Fixed bridge, for cross connections in the terminalcenter, with fixed crimped rolls, 10-position, screwheads with insulating collar as shock protection
(4) Insertion bridge, fully insul . .
2-pos.
divisible, insulated spine .
10-pos.(5) Isolator bridge bar, 10-position, divisible, with10 screws, for switchable branches with(6) Bridge bar isolator IS-K 4 as spacer
-eaa; any(7) Switch bar for 2 terminal blocks orbridged terminal groups, an end cover mustbe interposed
(8) Separating plate, for electrical separation ofneighboring bridges, can be fitted later, no loss ofpitch(9) Partition plate, for visual and electricalseparation of terminal groups. 2,5 mm thick
(10) Test socket, for test connectionwith test plug MPS orreducing plug RPS
Screwdriver
(11) Zack marker strip, 10-section
WhiteDimensionsWidth / length / cover width
Height (NS 15)Technical data in accordance with IEC / DIN VDEMax . load current / cross sectionMax. cross section with insertion bridge (solid/stranded)Rated surge voltage / contamination class
IEC 60 947-7-1
0 .2-2 .5
0 .2-2 .5
24-14 24
250EN 50 019'
0 .2-2 .5
0 .2-2 .5
24-14 22
175EU type-examination certificate no. . KEMA 03ATEX2380U')
c~us SN B BV/LR/PRS/RSEx KEMA
Order No . EQ. IPkt
MBK 2,5/E 1414006 50MBK 2,5/E BU 1414019 50
D-MBK 2,5/E 1414035 50D-MBK 2,5/E BU 1414022 50
FBRNI 10-5 N h.,, 24 A 27 70 63 9 10
EB 2-5 22 A 14 01 15 8f
100EB 3-5 22 A 14 01 14 5 100%EB 10-5 22 A 14 01 13 2 10
A D-MBK 2,5/E cover is necessary toseparate neighboring bridges
ATP-MBK 14 13 22 7
50
PSB 3/10/4 06 01 29 2
100
SZS 0.6 x 3,5 12 05 05 3
10
BN-ZB 5,2 (for order data, see page 405)
GrayBlue
(2) Fixed i , ross conne onsor
60 .0-66=[1111111Th
fully insulated .
3-pos . ]
' Ii
=ID
TypeColorDescription
[mm] 5 .2 / 24 .5 / 1[mm] 26.5
[A] / [mm ,] 24 / 2 .5[mm[] 2 .5 / 2 .5
[kV] / - 4 / 3Surge voltage category / insulating material group
- / -
III / IConnection capacity
Stranded with ferrule without / with plastic sleeve
[mm']Multi-conductor connection (2 cond. with same cross section)
0 .25 - 2 .5 / 0 .25 - 2 .5
Terminal width 5.2(IEC)[mmu]
flexible
I
Ustranded
AWG [A]
[V]rigidsolid
Substitution table
Old
New
Type
Order No .
Type
Order No.
MBK 5/E
1415076
MBK5/E-Z
1402940
[mm-] 0 .2 - 0 .75 / 0 .2 - 0 .75[mm'] 0 .25 - 0 .75[mm'] 0 .5 - 1 .5[mm] 7
A3
M3[Nm] 0 .6 - 0 .8
Insulation material
PA
Inflammability class in acc . with UL 94
V2Approval data (UUCUL and CSA)
Nominal voltage ' current r conductor sizes
UUCUL : [V] 1[A] / AWGCSA : [V] / [A] / AWG
') For information on installation and usage of accessories forEEx e applications, see page 508.
Solid stranded
Stranded with ferrules without plastic sleeve
Stranded with TWIN ferrule with plastic collarStripping length
Internal cylindrical gauge (IEC 60 947-1)ThreadTorque
300/20/30-12
300/20/28-12
308 Phoenix Contact
MBK 3/E-Z
MBK 5/E-Z
MBK 6/E
Terminal width 6 .2
Terminal width 8 .2
(IEC)
rigid
flexible
I
U
(IEC)
rigid
flexible
I
U
(IEC)
rigid
flexible
I
U
[mm=]
solid
stranded
AWG [A]
[V]
[mm2 ]
solid
stranded
AWG [A]
[V]
[mm 2 ]
solid
stranded
AWG [A]
[V]
IEC 60 947-7-1
0 .2-4
0 .2-2 .5
24-12 32
400
IEC 60 947-7-1
0 .2-6
0 .2-4
24-10 41
500
IEC 60 947-7-1
0 .5-10
0 .5-6
20-8
57
500
EN 50019'
0.2-4
0 .2-2 .5
24-12 28/21 275
EN 50019'
0 .5-10
0 .5-6
20-8 49/39 275
'ELI type-examination certificate no .: KEMA 01 ATEX2134U ')
* EU type-examination certificate no .. KEMA 01 ATEX2134U ,)
c~us SP B ' PRS
Ex KEMA
Order No .
Type
Pcs
Order No. I Pkt
Pcs .
Type
Order No.
PSt
TVPe
PkL
MBK 31E-Z
14 13 03 6
50
MBK 5/E-Z
14 02 94 0
50
MBK 6/E
05 52 02 4
50
MBK 3/E-Z BU
14 13 07 8
50
MBK 5/E-Z BU
14 02 98 2
50
D4ABK/E
14 15 02 1 :
50
D-MBK/E
14 15 02 1
50
D-MBK 6/E
14 13 04 9
50
D•MBK/E BU
14 15 10 2
50
D-MBK/E BU
14 15 10 2 i
50
FBI 10-6
41 A ' 02 03 25 0
10
FBI 10-8
48 A 02 03 26 3
10
FBRI 10-5 N
IT,,, 26 A' 27 70 64 2
10
EB 2-6
I,,,, : 32 A
02 01 15 5
100
EB 2-8
I,,,, : 43 A
02 02 15 4
100
EB 3-6
32 A 02 01 14 2
100
EB 3-8
43 A 02 02 14 1
100
cBL 10-5
I, „ : 24 A 23 03 13 2
10
EB 10-6
32 A 02 01 13 9
10
EB 10-8
43 A 02 02 13 8
10
ISSBI 10-8
43 A 03 01 53 4
10
IS-K10
1303337
100
SBRN 2-7
24 A 14 13 23 0
1
SBRN 2-7
24 A 14 13 23 0
SB 2-8/13
I,.,,43 A 02 02 23 5
1
TS-KK 3
27 70 21 5
50
TS-KK 3
27 70 21 5
50
TS-KK 3
27 70 21 5
50
ATP-MBK
14 13 22 7
50
ATP-MBK
14 13 22 7
50
ATP-MBK
14 13 22 7
50
PSB 3/10/4
06 01 29 2
100
PSB 3/10/4
: 06 01 29 2
100
PSB 4/7/6
03 03 29 9
100
SZS 0,6 x 3 .5
12 05 05 3
10
SZS 0.6 x 3,5
12 05 05 3
10
SZS 1 .0 x 4,0
12 05 06 6
10
ZB 5 (for order data, see page 397)
ZB 6 (for order data, see page 397)
ZB 8 (for order data, see page 399)
5 .2/28/1
6 .2/28/1
8 .2/35/1 .5
32
32
36
32/4
41/6
57/10
2 .5/2 .5
4/4
6/4
6/3
6/3
6/3
III/I
III/I
III/I
0 .25 - 2 .5 / 0 .25 - 1 .5
0 .25-4/0 .25-2 .5
0 .25-6/0 .25-6
02-1/02-1 .5
02-1 .5/0.2-1 .5
0 .5-2 .5/0 .5-2 .5
0 .25-1 .5
0 .25-1 .5
0 .5-2 .5
0 .5-1
0.5-2 .5
0 .5-2 .5
8
8
10
A3
A4
A5
M3
M3
M4
0 .6-0.8
0.5-OZ
1 .5-1 .8
PA
PA
PA
V2
VO
V2
600/20/28-12
600/30/26-10
600/50/26-8
600/20/28-12
600/10/26-10
600/50/26-8
Phoenix Contact 309
Terminal width 5 .2
e~us SB e P PRS
E)KEMA
c%us P PRS
A.
Miniature ground terminalblocks, MBK
These miniature ground terminal blocksare specially designed for the small 15 mmDIN rails in acc . with EN 60 715.
The green-yellow marking of theenclosed insulation housings means that thegrounding function of the terminal blocks isabsolutely clear.
The miniature ground terminal blocksare connected to the DIN rail via their footelements . The rail can therefore be used asa grounding busbar.
If the MBK 2,5/E-PE, MBK 3/E-Z-PE orMBK 5/E-Z-PE miniature ground terminalblocks are used at the end of a terminalstrip, then an end bracket, e .g . E/MK, shouldbe used .
MBK 2,5/E-PE
Terminal width 5 .2(IEC)[mm 2]
IEC 60 947-7-2
0.2-2.5
0 .2-2 .5
24-14For current carrying capacity of DIN rails, see page 499.
c91lus @ e P PRS
Description
Type
Order No.
MBK 2 .5/E-PE 14 02 78 8
50insulation housing
DIN rail, in accordance withEN 60 715 . 15 x 5 mm, length : 2 m,
Perforated_
NS 15 GELOCHT 1401682
1steel, yellow passivated
Unperforated NS 15 UNGELOCHT 14 01 69 5
1Marker pin, plastic,unprinted : for individual labeling with M-PEN, BN WH 14 01 40 4
100printed : with 1, 2 or 3 characters, white BNB WH : . . .') 14 01 41 7
100Screwdriver
fSZS0,6 x 3,5 1205053 .
10
Zack marker strip, 10-section,White
Dimensions
Width / length [mml 5.2 / 26 .5Height (NS 15) [mm] 26 .5Technical data in accordance with IEC / DIN VDEMax. load current / cross section [A] / [mm2] -Rated surge voltage / contamination class [kV) / - 4/3Surge voltage category / insulating material group - / - III
/
IConnection capacity
Stranded with ferrule without / with plastic sleeve Imm- ] 0 .25 - 2 .5 / 0 .25 - 1 .5
Solid / stranded [rnm1] 0 .2 - 1 / 0 .2 - 1 .5Stranded with ferrules without plastic sleeve [mm 2] 0 .25 - 1 .5Stranded with TWIN ferrule with plastic collar [mm , ] 0 .5 - 1 .5Stripping length [mm] 8Internal cylindrical gauge (IEC 60 947-1) A3Terminal point: Thread / torque - / [Nm] M3 / 0.6 - 0 .8Fastening : Thread / torque - / [Nm] -Insulation material PAInflammability class in acc . with UL 94Approval data (UUCUL and CSA)
VO
Nominal voltage current! conduclor sites
UUCUL : [V] / [Al/AWG
-/-/30-12
CSA : [V) / [A] / AWG
-/-/30-12
') Required marking is to be specified, see page 404.•) When aligning with feed-through terminal blocks with the same
shape, an end cover must be interposed with insulation voltagesof > 400 V.
i') For information on installation and usage of accessories forEEx e applications, see page 508 .
rigid
flexiblesolid
stranded AWG
Ground terminal block, for mounting on NS 15 ina ith EN 60 7crance w5, with green-yellow
Multi-conductor connection (2 con with same cross section).
310 Phoenix Contact
MBK 3/E-Z-PE
MBK 5/E-Z-PE
MSLKG 6
Terminal width 5.2
QEC)
rigid(RMr1r]
solid
IEC60947-7-2
0.2-4
flexiblestranded
0 .2-2 .5
AWG
24-12
Terminal width 6 .2(IEC)
rigid[mm']
solid
IEC 60 947-7-2
0 .2-6
flexiblestranded
AWG
Terminal width 8 .2
(IEC)
rigid
flexible[mm2]
solid
stranded
IEC 60 947-7-2
0 .5-10
0 .5-6EN 50 019*
0 .5-10
0 .5-6
AWG
0 .2-4
24-10 20-820-8Fercurrent carrying capacity of DIN rails, see page 499. For current carrying capacity of DIN rails, see page 499 .
* EU type-examination certificate no. : KEMA 01ATEX2134U')For current carrying capacity of DIN rails . see page 499.
us C
P
PRS
Tree Order No . Pcs.Pkt .
c%us P
PRS
Type Order No . Pct.Pkt .
r%us SN
PRS
£x KEMA
Type Pkt.Order No.
NBK 3/E-Z-PE 14 13 11 7 50 MBK 5/E-Z-PE 0452043 50 MSLKG 6 14 10 50 5 50
NS15GELOCHT 1401682 NS 15 GELOCHT 1401682 NS 15 GELOCHT 14 01 68 2 1NS 15 UNGELOCHT 14 01 69 5 1 NS 15 UNGELOCHT 14 01 69 5 NS 15 UNGELOCHT 14 01 69 5 1
SZS 0,6 x 3,5 12 05 05 3 10 SZS 0,6 x 3,5
12 05 05 3 10 SZS 1,0 x 4,0 12 05 06 6 10
(tor order data, see page 397) ZB 6 for order data, see page 397) ZB 8 for order data, see page 399)
5.2 128
31 .5
0.25-2 .5/0 .25-1 .5
0 .2 . 1/0 .2-1 .5
0 .25-1 .50 .5-1 .5
8A3
M3/0.6-0 .8
PAVU
-/-/30-12
-/-/28-12
6 .2 / 28
32
6/3/ I
0.25-4!0.25-2 .5
0 .2-1 .5/0 .2- 1 .5
0 .25 - 1 .5
0.5 - 2 .58
A4M3/0 .6-0.8
PA
VU
-/-/26-14-1—/26-14
8.2 / 39
36
6') / 3III / I
0.5-6/0 .5 . 6
0.5-2 .5/0 .5-2.5
0 .5-1 .50 .5-2 .5
10A5
M4/1 .5-1 .8M4/1 .5-1 .8
PAV2
-/-/26-8
-/-126-8
0-0
Phoenix Contact 311
Description
Color
Terminal block, with screw connectionon both sides, for slide fitting on Lr
GrayBlue
Terminal block with screw and solderconnection, for slide fitting on Lr
GrayBlue
Terminal block, with solder connectionon both sides . for slide fitting on Lr
GrayBlue
Terminal block, with screw and slip-onconnection, for slide fitting on Lr
GrayBlue
Terminal block, with slip-on connectionon both sides, for slide fitting on Lr
GrayBlue
Insertion bridge, fully insul.,
2-pos.fully insulated,
3-pos.divisible, insulated spine,
10-pos.
Partition plate, for visual and electricalseparation of terminal groups
Separating plate, in accordance withEN 50 020, section 5 .4, for intrinsically safecircuits, 2 mm thick . grayEnd bracket, for rail-free mounting or for fixingthe plug-in blocks in the case of rail mounting,6 mm wide, hole 3 .2 mm
Marker pin, plastic,unprinted : for individual labeling with N1-PEN,printed : with 1, 2 or 3 characters, white
Screwdriver
Miniature strip terminal blocksMBK
The MBK miniature strip terminalblocks and their variants with solder or slip-on connections represent the originaltypical form of the MBK series . The desirednumber of terminal blocks can be cut off thestrip and slid onto the 15 mm DIN rail orfitted directly on the mounting plate . Theend bracket, E/MBK, is used here . In thecase of rail-free mounting, terminationblocks made up of a maximum of twelveterminal blocks are fixed in place using theend bracket and screwed onto themounting plate.
In order to achieve the ideal andsmallest possible constructional size, thebridging possibility in the terminal centerhas been purposely done away with here.However, in order to retain the capability ofpower distribution, the miniature stripterminal blocks with screw connection canbe bridged using insertion bridges with upto 10 positions .
MBK
Terminal width 5 .2
(IEC)
rigid
flexible
I
U[mm l
solid
stranded AWG [Al [V[
IEC 60 947-7-1
0 .2-2 .5
0.2-1 .5
24-14 24
500
c~us
SP
K~~R~ ',a
Type
MBKMBKBU
n BV/LR/NV!RS+'NK
PcsPkt.
200200
Order No.
14 01 01 91401093
EB 2-5 I,,24 A 14 01 15 8 100E B 3-5 24 A 14 01 14 5 100EB10-5 24 A 1401132 10
ATS-MBK 0 .5 mm thick 14 02 22 5 100ATP-MBK 2 .5 mm thick 14 13 22 7 50
TP-BK/MBK 08 01 79 1 10
E/M B K 1401637 100
BN WH 14 01 40 4 100BNB WH : .. .') 14 01 41 7 100
SZS 0,6 x 3,5 1205053 10
]
DimensionsWidth / length / cover width [mm]
Height (NS 15) [mm]Technical data in accordance with IEC / DIN VDEMax . load current / cross section ! flat connector [A] / [mm z[
Max . cross section with insertion bridge (solid/stranded) [mm']
Rated surge voltage / contamination class [kV] / -
Surge voltage category / insulating material group - / -
Connection capacityStranded with ferrule without ! with plastic sleeve [mm']
[Nm]
5 .2 / 22
23
0.25-1 .5/0 .25-1
0 .2-0 .75/0 .2-1
025-0.50 .5-075
8Al
M2.60 .5 - 0 .6
PAV2
Multi-conductor connection (2 cond . with same cross section)Solid stranded
:mm-]
Stranded with ferrules without plastic sleeve
[mm 2 ]Stranded with TWIN ferrule with plastic collar
[mm")
Stripping length [mm]Internal cylindrical gauge (IEC 60 947-1)
ThreadTorque
Insulation materialInflammability class in acc. with UL 94
Approval data (UUCUL and CSA)Nominal voltage! current! conductor sizes
UUCUL : [V] / [Al ! AWG
300 /15/. 30 - 14
CSA : [V]/[A]/AWG
150/25/28-12
Required marking is to be specified, see page 404.
312 Phoenix Contact
MBK-LOE
Terminal width 5.2rigid
flexible
I
Usolid
stranded
AWG [Al
[V]
Connection data
0 .2-2 .5
0 .2-1 .5
24-14
15
400Solder connection
0 .2-1 .5
0.2-0 .75
24-16
15
400
MBK-FSTerminal width 5 .2
(IEC)
rigid
flexible
I
U[mm2 ]
solid
stranded
AWG (A]
[V]
Connection data
0 .2-2 .5
0 .2-1 .5
24-14
16
400Slip-on connection 2 .8 x 0 .8 mm
'' Current and voltage data for slip-on connections in acc . with
EN 61 210 also depend on the nominal size, material, insulationof the slip-on sleeve and conductor cross section .
MBK-FS/FSTerminal width 5 .2
(IEC)
rigid
flexible
I
U[mm 2]
solid
stranded
AWG [A]
[V]
Connection data
16
400'Slip-on connection 2 .8 x 0 .8 mm` Current and voltage data for slip-on connections in acc. with
EN 61 210 also depend on the nominal size, material, insulationof the slip-on sleeve and conductor cross section.
z]
B p
Type Order No.
MBK-LOEMBK-LOE BU
MBK-LOE/LOEMBK•LOE/LOE BU
EB 2.5EB 3.5EB 10-5
ATS-MBKATP-MBK
1P-BKIMBK
EIMBK
ON WHBNB WH : . . .)
S25 0,6 x 3 .5
0 .5 mm thick 14 02 22 52 .5 mm thick 14 13 22 7
., .15A 140115815A 140114515A 1401132
14 01 63 7
14014041401417
1205053
1405015
1001405099
100
14 04 01 6
10014 04 09 0
100
SP B p
Type
Order No.
MBK-FS
14 07 01 3
200MBK-FS BU
14 07 09 7
200
100
EB 2-5
: 16 A 14 01 15 8
100100
EB3-5
16 A 1401145
10010
EB10-5
16A : 1401132
10
100
ATS-MBK
0.5 mm thick 14 02 22 5
10050
ATP-MBK
2 .5 mm thick 14 13 22 7
50I
10
TP-BK/MBK
08 01 79 1
10
100
EIMBK
14 01 63 7
100
100
BN WH
1401404
100100
BNBWH : . . .1)
1401417
100
10
SZS0,6x3,5
1205053
10
SP
B
Type
Order No .
Pcs.Pkt.
MBK-FS/FS
14 06 01 4
200MBK-FS/FS BU
14 06 09 8 200
ATS-MBK
0 .5 mm thick
14 02 22 5 100ATP-MBK
2 .5 mm thick
14 13 22 7
50
TP-BK/MBK
08 01 79 1
10
E/MBK
14 01 63 7
100
BNWH
14 01 40 4
100BNB WH : . . . , )
14 01 41 7
100
Pcs.Pkt.
5 .2 / 32 5 .2/22 5 .2 / 22
23 23 23
15/2 .5/1 .5/1 .5
16/2.5/ 2)
1 .5/1 .5
6/3III
/I
6/3
6/3
III/I
III/I
0 .25 - 1 .5 / 0 .25 - 1 0 .25-1 .5/0.25-1
0 .2 - 0 .75 / 0 .2 - 1 02-0 .75/0 .2-1
0.25 - 0 .5 025-0 .5
0.5 - 0 .75 0 .5-075
8Al
8Al
M2 .6 M2 .6
0 .5 - 0.6 0 .5-0 .6
PA PA
PA
V2 V2
V2
150/10/28-18 150/20/28-14
2) Dependent on the slip-on connection sleeve .
150/20/22-14
Phoenix Contact 313
Miniature terminal blocks, MBK
MBK 3Block of 10, for slide fitting on DIN rails
Terminal width 5.2(IEC)[mm2]
rigid
flexiblesolid
stranded AWGI
(A]U
[V]
I EC 60 947-7-1 0 .2-4
0 .2-2 .5 24-12 32 500
cliqus
SP
K([
Type
cti
a LR/BV/PRS/NK
Order No. Pte'
MBK 3 14 13 01 0
Pkt.
50MBK3BU 1413094 50
D-MBK 3/5 14 13 02 3 50D-MBK 3/5 BU 14 13 10 4 50
FBRI 10-5 N 26 A 27 70 64 2
EBL 10-5 24 A 23 03 13 2 10
SBRN 2-7 I,,
.24A 1413230
TS-KK 3 27 70 21 5 50
ATP-MBK 1413227 50
PSB 3/10/4 06 01 29 2 100
1
Test socket, for test connectionwith test plug MPS orreducing plug RPSDimensions
Width / length / cover width
[mm]
5 .2 / 28 / 2 .5Height (NS 15)
[mm]
32Technical data in accordance with IEC / DIN VDEMax . load current / cross section
[A) / [mm]
32/4Max . cross section with insertion bridge (solid/stranded)
[mm ? ]
2.5 / 2.5Rated surge voltage / contamination class
[kV]I-
6/3Surge voltage category / insulating material group
- / -
III / IConnection capacity
Stranded with ferrule without / with plastic sleeve
[mm2 ]
0 .25 - 2 .5 / 0.25 - 1 .5Multi-conductor connection (2 cond . with same cross section)
Solid ! stranded
[mrn2]
0 .2 - 1 .5 / 0 .2 - 1 .5
Stranded with ferrules without plastic sleeve
[mm2 ]
0 .25 - 1 .5Stranded with TWIN ferrule with plastic collar
[mm' ]
0 .5 - 1Stripping length
[mm]
8Internal cylindrical gauge (IEC 60 947-1)
A3
Terminal point: Thread/torque
-/]Nm]
M3/0.6 0 .8Fastening : Thread / torque
- / [Nm]
-
Insulation material
PAInflammability class in acc . with UL 94
V2Approval data (UL/CUL and CSA)
Nominal voltage r current r conductor sizes
UL/CUL : ]V] / [A) / AWG
600 / 20 / 28 - 12
CSA : [V]/[A] /AWG
150/25/28-12
CSA : [V] / [Al/ AWG
-
') When aligning with feed-through terminal blocks with the sameshape, an end cover most be interposed with insulation voltagesof > 250 V.
Description
Color
Terminal block, for mounting onNS 15 in accordance with EN 60 715
GrayBlue
Ground terminal block,l), formounting on NS 15 in accordance
Green-yellowwith EN 60 715
Cover GrayBlue
Fixed bridge, for cross connections inthe terminal center, screw heads with insulatingcollar, 10-position, divisible, with 10 screws
Fixed bridge, for cross connections in the terminalcenter, with fixed crimped rolls, 10-position, screwheads with insulating collar as shock protection
Insertion bridge, fully insul .,
2-pos.fully insulated,
3-pos . is 111divisible, insulated spine,
10-pos.
Isolator bridge bar, 10-position . divisible, with 10screws . for switchable branches withBridge bar isolator IS-K 4 as distance pieceSwitch bar for 2 terminal blocks or bridgedterminal groups, an end cover must beinterposed
Separating plate, for electrical separation of neighboringbridges . can be fitted later, no loss of pitch
Partition plate, for visual and electrical separation ofterminal groups, 2,5 mm thick
a. ..^, a = =I
= =
314 Phoenix Contact
MBK 5Block of to, for slide fitting on DIN rails
MSLKG 2,5 MSLKG 5
Terminal width 6 .2
Terminal width 7 .5
(EC)
rigid
flexible
I
U
(IEC)
rigid
flexible
Ftrn2]
solid
stranded
AWG [Al
[V]
[mm']
solid
stranded
AWG
E060947-7-1
0.2-4
0 .2-4
24-12 32
500
IEC 60947-7-2
0 .2-4
0 .2-2 .5
24-12EN 50 019'
0 .2-2 .5
0 .2-2 .5
-EU type-examination certificate no . . KEMA 03ATEX2381 U -')
For current carrying capacity of DIN rails . see page 499.
si SP
LR/PRS/RS
G KEMA ('
Terminal width 8 .2(IEC)
rigid
flexible[mm 2]
solid
stranded
AWG
IEC 60 947-7-2
0.2-4
0 .2-4
24-12EN 50 019'
0.2-4
0 .2-4
24-12- EU type-examination certificate no .. KEMA OOATEX2100UFor current carrying capacity of DIN rails, see page 499.
SB
NV/PRS/RSEx KEMA P
r~us C K(( n` ' LR/BV/PRS/NK
TypePcs.Pkt . Type
Pcs.Pkt. TypeOrder No. Order No . Order No .
PrS'Pkt.
MBK 5NBK 5 BU
1415018
501415092
50
MSLKG 2,5
04 52 02 7
MSLKG 5
04 52 01 4
50
5050
10
04IBK 3/50-MBK 3/5 BU
FBI 10.6
ES 2-6EB 3-6EB 10-6ESBI 10-6
6-K 4
SBBN 2-9
TS-KK 3
141302314 13 10 4
I m,„ .:34A 0203250
:32A 0201155
100
32A 0201142
100
32A 0201139
10
24 A 03 01 50 5
10
13 02 33 8
100
1 , ,24 A 14 15 23 8
27 70 21 5
50
ATP-MBK 14 13 22 7
50
06 01 29 2
100
32
26.5
8 .2 / 38 / -
327 .5/351-6 .2 128 / 2 .5
32/4
4/2 .5
6/3III/I
0 .25-4/0.25-2 .5
6') / 3III/I
0 .25-2 .5/0.25 - 1 .5 0 .25 - 4 / 0 .25 - 2 .5
0 .2-1 .5/0 .2-1 .5
0 .2-1/0.2-1
0 .25-1 .5
0.25-1 .5
0 .5-2 .5
0 .5-1
8
8A4
A3
M3/0 .6-0.8
M3/0 .6-0.8M2 .5 / 0.5 - 0 .6
PA
PA
VO
V2
0 .2-1 .5/0.2-1 .5
0 .25 - 1 .5
0 .5 - 1
A3
M3/0 .6-0 .8
M3/0 .6-0 .8PA
V2
600/30/26-10
150/40/28-10300/10/28-10
-/-/28-12
-/-/28-12
- I-126-10- /-/28-10
-) For information on installation and usage of accessories forEEx e applications, see page 508.
Phoenix Contact 315
Miniature terminal blocks, MBKwith slip-on connection
The MBK 5/E-FS enables the internalwiring common in wide areas of controlcabinet design using pre-assembled cableswith slip-on connection. On the externalside of the control cabinet, this terminalblock has a screw connection with thetested spring-cage system .
MBK 5/E-FSSingle terminal block, snaps onto DIN rail
Terminal width 6 .2
(IEC)
rigid
flexible
I
U[mm2 ]
solid
stranded
AWG [A]
[V]
Connection data
0 .2-4
0.2-4
24-12 16
500Slip-on connection 2.8 x 0 .8 mm
'* Current and voltage data for slip-on connections in acc . with
EN 61 210 also depend on the nominal size, material, insulationof the slip-on sleeve and conductor cross section .
Miniature double-level terminalblock, MBKKB 2,5
The range of MBK miniature stripterminal blocks has now been extended toinclude the miniature double-level termiblock MBKKB 2,5 . The special features o 'this terminal block are:
Low, space-saving constructionDouble packing density due to the twolevelsLateral level offset by half a terminalwidth, therefore easily accessibleconnecting screws in the lower level andclearly visible conductor entry.The spacer plate DP-MBKKB 2,5
compensates for the level offset at the endof the terminal strip so that standardminiature strip terminal blocks can bedirectly aligned.
The MBKKB 2,5 can be easily pushedonto the NS 35/ . . . or NS 15 in acc . withEN 60 715.
With the MBKKB 2,5 it is possible toinsert fixed bridge bars and test sockets intoboth levels . An electrical or optical isolationcan then be made without loss of pitch bythe subsequent addition of separatingplates.
The miniature double-level terminalblock MBKKB 2,5-PV has all the advantagesof the MBKKB 2,5 . The special feature is itsfunction as a power distributor, i .e. theupper and lower levels are permanently
4interconnected.
In this miniature double-level termin g'block version, both levels areinterconnected . Equipotential bonding ismarked by an imprint on the terminalhousing.
') Dependent on the slip-on connection sleeve.
Description
Terminal block, for mounting onNS 15 in accordance withEN 60 715
Color
GrayBlue
opCSU In
Type
MBK 5/E-FSMBK 5/E-FS BU
Terminal block, as above, but withslip-on connection on both sides
Cover
Fixed bridge, for cross connections in
GrayBlue
GrayBlue
y• '17-5S~n~+
MBK 5/E-FS/FSMBK 5/E-FS/FS BU
D-MBK/ED-MBK/E BU
the terminal center, screw heads with insulating UUUUUUUUUU FBI 10-6 I T,, :10Acollar, 10-position, divisible, with 10 screws
Insertion bridge, fully insul . .
2-pos .
/JJ
EB 2-6 16Afully insulated,
3-pos . EB 3-6 16 Adivisible, insulated spine,
10-pos.div --- EB10-
6 16A
Isolator bridge bar, for switchable branches,
y 1 5j10-pos ., divisible, with 10 screws and
LJIl )UJIIU11IIBridge bar isolator, as spacer for ISSBI 10-8
i
. i
IS-K 4
Switch bar for 2 terminal blocks or bridgedterminal groups . an end cover must be
._
SBRN 2-7
I : 10 A--interposed
Separating plate, for electrical separation ofneighboring bridges, 1 mm thick
D-MBK/E
ATP-MBKPartition plate, for visual and electrical separation ofterminal groups, 2 .5 mm thick
Test socket, for test connection with MPS test plug orRPS reducing plug
PSB 3/10/4
Test socket, insulated . only used above FBI, ISSBI,for test connections with test plug MPS or RPS
PSBJ 3/13/4
Screwdriver *_
SZS 0,6 x 3,5
Dimensions
Width r length / cover width
[mm]
Height (NS 15)
[mm]
Technical data In accordance with IEC / DIN VDE
Max- load current l cross section / flat connector
[A] / [mm, ]
16/4/ 1)Max . cross section with insertion bridge (solidistranded)
[mm']
2 .5 11 .5
Rated surge voltage / contamination class
[kV] / -
6/3
Surge voltage category / insulating material group
-/-
III / I
Connection capacityStranded with ferrule without / with plastic sleeve
[mm 2 ]
0 .25 - 4 / 0 .25 - 2 .5
Multi-conductor connection (2 cond. with same cross section)Solid / stranded
[mm 2]
0 .2 - 1 .5 / 0 .2 - 1 .5
Stranded with ferrules without plastic sleeve
[mm 2]
0 .25 - 1
Stranded with TWIN ferrule with plastic collar
[mm 2]
0 .5 - 1 .5
Stripping length
[mm]
8Internal cylindrical gauge (IEC 60 947-1)
A3
Thread
M3Torque
[Nm]
0 .6 - 0 .8
Insulation material
PA-FInflammability class in acc . with UL 94
HB
Approval data (UUCUL and CSA)
Nominal voltage! current / conductor sizes
UUCUL [V] / [A] / AWGCSA : [V] / [A] / AWG
ISSBI 10-6 : 10 A
6 .2/28/132
300/5/26-10
300/5/26-10
Order No. Pcs.PM.
1418073 501418112 50
1417074 501417113 50
14 15 02 1 501415102 50
0203250 10
0201155 10002 01 14 2 1000201139 10
03 01 50 5 10
13 02 33 8 100
14 13 23 0
14 15 02 1 50
14 13 22 7 50
0601292 100
02 01 30 4 10
1205053 10
316 Phoenix Contact
MBKKB 2,5 MBKKB 2,5-PVwith equipotential bonding between the levels
Terminal width 5 .2
Terminal width 5 .2
(IEC)
rigid
flexible
I
U
(IEC)
rigid
flexible
I
U[mmu ]
solid
stranded
AWG [Al
[V]
[mm 2 ]
solid
stranded
AWG [A]
[V]
IEC 60 947-7-1
0 .2-4
0 .2-2 .5
24-12 24
500
IEC 60 947-7-1
0 .2-4
0 .2-2 .5
24-12 24'
500EN 50 019"
0 .2-4
0 .2-2 .5
24-12 21/26 275
* The max . load current must not be exceeded by the total current' EU type-examination certificate no. : KEMA 03ATEX2082U ')
of all connected conductors.
lotion
color
c%us SR e n B' BV/LR/NV/PRS/RS
Ex KEMA
Type Order No .
c%us B P PRS
Type Order No.
For information on installation and usage of accessories forEEx a applications, see page 508 .
Pos.Pkt .
Pee.Pkt.
Terminal block.Ix mounting on LC and Lr Gray
MBKKB 2,5Blue
MBKKB 2,5 BU14 14 06 4
5014 14 07 7
50
D-MBKKB 2,5D-MBKKB 2,5 BU
DP-MBKKB 2,5
Merton bridge, fully insal .,
2-pos. f
!
[ ((]
EEB 2-5
B 3-5key insulated,
3-pos.Itissible, insulated spine .
10-pos.
EB 10-5
Separating plate, for electrical separation of neighboringlodges, can be fitted later, no loss of pitch
TS-KK 3 SOonly in conjunction with FBRNI . ..
lamina! block, as above, but withplipotential bonding between the
GrayWeis
Blue
GrayBlue
tracer plate, compensates for level offset ifand terminal blocks are aligned in rows,
mm thick
bridge, for cross connectionsterminal center, with fixed
2-pos.
FBRNI 2-5 Numped rolls. screw heads with
3-pos.
FBRNI 3-5 Nmutating collar as shock protection
4-pos.
=6SrSrS;/; .
FBRNI 4-5 N
10-pos.
FBRNI 10-5 N
1st socket, for test connection with MPS test plug orIFS reducing plug
PSB 3110/4
Teat socket, insulated, only used with FBRNI, for testconnections with test plug MPS or RPS
PSBJ 3/13/4
MBKKB 2,5-PV
I 28 00 58 3
50MBKKB 2,5-PV BU
14 14 13 2
50
14 13 05 2
50
D-MBKKB 2,5
14 13 05 2
50
14 13 08 1
50
D-MBKKB 2,5 BU
14 13 08 1
50
14 13 06 5
50
DP-MBKKB 2,5
: 22 A 30 00 17 5
10
FBRNI 2-5 N
I,-,,22 A
22 A 30 00 16 2
10
FBRNI 3-5 N
22 A
22 A 30 00 15 9
10
FBRNI 4-5 N
22 A
22 A 2770639
10
FBRNI 10-5 N
22 A
I,,,20A 1401158
100
EB2-5
20A
20 A 14 01 14 5
100
EB 3-5
20 A
20A 1401132
10
EB10-5
20A
27 78 53 4
50
TS-KK 3
27 70 21 5
50
06 01 29 2
100
PSB 3/10/4
06 01 29 2
100
02 01 30 4
100
PSBJ 3/13/4
02 01 30 4
100
12 05 05 3
10
SZS 0,6 x 3,5
1205053
10SZS 0,6 x 3,5
1413065
50
3000175
103000162
103000159
102770639
10
1401158
1001401145
1001401132
10
tack marker strip, 10-section,
White
ZB 5 (for order data, see page 397)
ZB 5 (for order data, see page 397)
tensionsNdlh 1 length / cover width
[mm]
Height (NS 15 / NS 35/7 .5 / NS 35/15)
[mm]lehnical data in accordance with IEC / DIN VDE
Wax . load current / cross section
[A] / [mm']
Um . cross section with insertion bridge (solid/stranded)
[mm, ]
Rated surge voltage / contamination class
[kV] / —
Sage voltage category/ insulating material group
-/-
Cennection capacity
$landed with ferrule without / with plastic sleeve
[mm"j
illticonductor connection (2 cond . with same cross section)
Slid / stranded
[mm , ]banded with ferrules without plastic sleeve
[mm-]
banded with TWIN ferrule with plastic collar
[mm]
pping length
[mm]
nal cylindrical gauge (IEC 60 947-1)I ad
Torque
[Nmj
emulation material
Mammability class in acc . with UL 94Ipproval data (UL/CUL and CSA)
aaninal voltage `current + conductor sues
UL/CUL: [V] / [A] / AWGCSA: [V] / [Al / AWG
5.2/62/2 .5
5 .2/62/2 .5
47 .5/48/55 .5
47 .5/48/55 .5
24/4
24/4
2 .5 / 2.5
2 .5 / 2 .5
6/3
613
III / I
III / I
0.25-2 .5/0.25-1 .5
0 .25 - 2 .5 / 0.25 - 1 .5
0 .2-1 .5/0.2 - 1 .5
0 .2-1 .5/0.2-1 .5
0.25-1 .5
0.25-1 .5
0 .5 - 1 .0
0 .5 - 1 .0
7
7
A3
A3
M3
M3
0 .5 - 0.6
0 .5 - 0.6
PA
PA
V2
V2
300/20/30-12
300/20/30-12
300/20/28-12
300/20/30-12
Phoenix Contact 317
Device terminal blocksG5andG10
G 51. ..
(IEC)
rigid
flexible
I[mm2 ]
solid
stranded
AWG [A]
DIN VDE 0606 0.2-4
0 .2-4 24-12
32IEC 60 947-7-1 0.2-4
0 .2-4 24-12
32These compact terminal blocks are Explosion-protected version also available on request.primarily used for mains connections forelectric and electronic equipment andsmaller terminal boxes.
The housing is made of impact resistant
Description Number of
c~us
SP ;oi.;' P
Type
PRS/NK
Order No.
polyamide and offers finger-safe shockDevice terminalprotection . The blocks have interlocking block, for direct mounting
positions
2 G5/2 2716020tongues and grooves and are equipped with 3 G5/3 2716033
4 G 5/4 27 16 04 6two screws each.The impressed marking can be s
6 G 5/6 27 16 06 2individually supplemented with the broad 12 G 5/12 27 16 12 7
range of BNB marker pins (see page 404) .
Bridged, orange 2 G 5/2 B 27 16 30 5
Warning label, 2 WS-G5/2 27 20 02 93 WS-G5/3 27 20 03 24 WS-G5/4 27 16 49 9
Marker pin,unprinted : for
plastic.individual labeling with M-PEN . BN WH 1401 404
printed : with 1 . 2 or 3 characters, white BNB WH : . . .1) 14 01 41 7Screwdriver
SZS 0,6 x 3,5 12 05 05 3
DimensionsTechnical data
Max . load current
in accordance with
/ cross section
IEC / DIN VDE
[A) / [mm2]
See drawing
32/4Rated surge voltage / contamination class [kV] /- 6/3
Surge voltage category / insulating material group -i - II/
I
ConnectionStranded with
capacityferrule without / with plastic sleeve [mm'-] 0 .25-4/0.25-2 .5
Multi-conductor connection (2 cond . with same cross section)Solid / stranded
[mm]Stranded with ferrules without plastic sleeve
[mm-]
Stranded with TWIN ferrule with plastic collar
[mm-]
Stripping length
[mm]Internal cylindrical gauge (IEC 60 947-1)
ThreadTorque
[Nm]
Insulation materialInflammability class in acc . with UL 94
Approval data (UL1CUL and CSA)Nominal voltage . current r conductor sizes
UL/CUL: [V] / [A] / AWG
GSA : [V] / [A] / AWG
.) Required marking is to be specified, see page 404 .
0 .2 - 1 .5 / 0 .2 - 1 .5
0 .25 - 1 .50 .5-1
8A3
M30 .6 - 0 .8
PAV2
300/30/26-10300/30/28-10
a
b
G 5/2
20
G 5/3
31
11
G 5/4
38
18
G 5/6
52
32
G 5/12
92
72 .5
G 5/2 B
20
Type
Dimensions in [mm]24
14,6
8,5~b
G 51. ..
318 Phoenix Contact
G 10/. ..
(IEC)[mm2]
DIN VDE 0606IEC 60 947-7-1
SP K(
P
lope
rigid flexible Usolid stranded AWG (A] [V]
0 .5-16 0 .5-10 20-6 76 7500 .5-16 0 .5-10 20-6 76 800
CCA/PRS
Order No. Pcs.Pkt.
31
G10/2 27 16 70 3
50G10/3 27 16 71 6
50G10/4 27 16 72 9
50
G5/12 2716732
50
IttWH 1401404 100dNB N1H : . .2) 14 01 41 7 100
5251 .0x4,0 1205066 10
See drawing
76/168/3
III
I
0 .5-16/0 .5-16
0 .5-6/0.5-60 .5-6
0 .5-6
12B6
M41 .5- 1 .8
PAV2
600/65/24-6
600/65/22-6
Type Dimensions in [mm] b
17
a b
G 10/2 29 0 J
G 10/3 46 17
G 10/4 57 28
G 5/12 68 39
G 10/. . .
Phoenix Contact 319