Metric Clamps - penhose.capenhose.ca/shared/media/products/83/pdf/143/metricclamps.pdf · Metric...

Metric Clamps P

Parker Hannifin CorporationTube Fittings DivisionColumbus, Ohiohttp://www.parker.com/tfd

P2

Metric Clamps

4300 Catalog

Size 0 Size 1-6

TSMounting Rail

P11

APRBStrip Weld Plate

P11

ASBStacking Bolts

P11

SSBHex Head Bolt

P10

RBP/RBNClamp Halves

P10

TSMounting Rail

P6

APWAWeld Plate Angled

P6

APRAWeld Plate-Strip

P6

APKAWeld Plate-Short

P5

ISCCap Screws

P8

SSCHex Head Bolts

P8

RCP/RCN/RCA/RCPDClamp Halves

P7

Standard SeriesNormalMechanicalStress

Heavy SeriesHigh Mechanical Stress

RAP/RAN/RAAClamp Halves

P4

SLASlotted Screws

P5

SSLAHex Head Bolt

P5

APDADouble Weld Plate

P5

DPATop Plate

P6

TMBLock Nut

P11

SPCLocking Plate

P9

APCWeld Plate

P8

ASCStacking Bolts

P8

SBALocking Plate

P6

TSCMounting Rail

P9

TMALock Nut

P6

ASAStacking Bolts

P6

ISACap Screws

P5

APLAWeld Plate-Long

P5

APDCDouble Weld Plate

P8

DPCTop Plate

P9

DPDCDouble Top Plate

P9

TMCLock Nut

P9

USALocking Washer

P6

APLCWeld/Screw Plate

P8

USCLocking Washer

P9

Twin SeriesNormalMechanicalStress

DPBTop Plate

P11

ISBCap Screws

P10

APBWeld Plate

P11

SBBLocking Plate

P11

USLocking Washer

P11

Size 0 Size 1-6 Size 0 Size 1-6

Size 0 Size 1-6


P3

Metric Clamps

4300 Catalog

Stacking (Fig. P3)

A primary feature of the Metric Clamp system is its ability to accommodate stacking of a series of clamps to various heights, thus requiring a smaller footprint for mounting. To do this, simply use the stacking bolts to mount the first clamp assembly, then install a stacking plate over the first clamp and stacking bolts. The second clamp assembly can then be placed over the first clamp assembly. Complete the mounting by assembling a cover plate and using the hex head bolts to tighten the upper clamp assembly. Note: When stacking, the clamps must be from the same series and group.

Reference LocationsAssembly and Installation: Please refer to Section S for the assembly and installation instructions for Metric Clamps.

Metric ClampsThe Parker Metric Clamp system is designed for restraining tube, pipe and hose assemblies against unwanted, and potentially harmful effects of mechanical shock and vibration forces that are common in fluid power systems.

The clamping system is the most commonly overlooked aspect of fluid power system design. Failure to properly restrain the fluid conducting system can result in leakage, downtime and system malfunction, as well as significantly reduced life of tube, pipe and hose assemblies. With the Parker Metric Clamp system, the risk of problems resulting from mechanical shock and vibration can be significantly reduced.

How Metric Clamps WorkThe Metric Clamp system has two primary methods for mount-ing: weld plates and mounting rails. Clamps may be mounted to secure a single layer of tube or stacked for securing multiple layers.

Clamps should be mounted to a rigid structure for optimum performance. Clamping tube, pipe or hose assemblies together without mounting them to a rigid structure, often called “floating clamps,” does not provide adequate support.

Proper design of a clamping system requires that the clamps be positioned appropriately on the tube, pipe or hose assemblies. See the Assembly and Installation section of the catalog for more information on clamp location and spacing.

Weld Plate Mounting (Fig. P1)

The weld plate mounting system allows the user to attach a single clamp assembly to a structure of similar material (steel to steel, etc) by welding the components together. Once the weld plate is attached to a structure, one clamp half can be placed onto the weld plate, followed by the tube, pipe or hose assembly. Next, the second plastic clamp half can be placed on the tube, pipe or hose assembly, followed by the cover plate. To complete the assembly, the Hex Head attachment bolts are inserted into the assembly and tightened.

Mounting Rail Mounting (Fig. P2)

Use of a mounting rail is another way to assemble the clamping system components onto a support structure. Using a mounting rail allows multiple clamps to be mounted side-by-side for restrain-ing a group of tube, pipe, or hose assemblies. The mounting rail also provides the ability to move the location of the clamps in one direction for easier alignment. The rail can be attached to a support structure by welding or bolting. Once the mounting rail is in place, rail nuts can be slid into the rail. The first clamp half, followed by the tube, pipe or hose assembly, can then be installed over the corresponding rail nuts. After this, the second clamp half, the cover plate and the hex head attachment bolts can be installed to complete the assembly.

Fig. P1 – Weld Plate Assembly

Fig. P2 – Mounting Rail Assembly

Fig. P3 – Stacked Assembly


P4

Metric Clamps

4300 Catalog

Dimensions and pressures for reference only, subject to change.

Material codes for clamp halves:

Polypropylene - RAPinside plain - RAPG (for hose)Polyamide 6 - RAN (Nylon)inside plain - RANG (Nylon) (for hose)Aluminum - RAA (Group 1 to 6 only)

RAP / RAN / RAAClamp Halves

Standard Series A – Normal Mechanical Stress

Group 0

Groups 1-6

TUBEFITTINGPART #

GROUP #

A Metric Tube Size

A Inch Pipe Size

A Inch Tube Size

B (mm)

C (mm)

D (mm)

E (mm)

RAP006X 6RAP006.4X 6.4 1/4RAP008X 8 5/16RAP009.5X 9.5 3/8RAP010X 10 1/8RAP012X 0 12 28 27 12.5 13.5RAP106X 6RAP106.4X 6.4 1/4RAP108X 8 5/16RAP109.5X 9.5 3/8RAP110X 10 1/8RAP112X 1 12 34 27 20 13.5RAP212.7X 12.7 1/2RAP213.5X 13.5 1/4RAP214X 14RAP215X 15RAP216X 16 5/8RAP217.2X 17.2 3/8RAP218X 2 18 40 33 26 16.5RAP319X 19 3/4RAP320X 20RAP321.3X 21.3 1/2RAP322X 22RAP323X 23RAP325X 3 25 1 48 35 33 17.5RAP426.9X 26.9 3/4RAP428X 28RAP430X 4 30 57 42 40 21RAP532X 32 1 1/4RAP533.7X 33.7 1RAP535X 35RAP538X 38 1 1/2RAP540X 40RAP542X 5 42 1 1/4 70 58 52 29RAP644.5X 44.5 1 3/4RAP645X 45RAP648X 48 1 1/2RAP650X 50RAP650.8X 50.8 2RAP652X 52RAP655X 6 55 86 66 66 33RAP657X 57 2 1/4


P5

Metric Clamps

4300 Catalog



SLASlotted Screws

SSLAHex Head Bolt

ISACap Screws

APKAWeld Plate – Short

APLAWeld Plate – Long

APDADouble Weld Plate

Group 0

Groups 1-6

Groups 1-6

Group 0

TUBE FITTING PART #

GROUP #

D (mm)

L (mm)

SLA0X 0,1 M6 x 1 20SLA2X 2 M6 x 1 25SLA3X 3 M6 x 1 30SLA4X 4 M6 x 1 35SLA5X 5 M6 x 1 50SLA6X 6 M6 x 1 60

TUBE FITTING PART #

GROUP #

D (mm)

L (mm)

SSLA0X 0,1 M6 x 1 30SSLA2/SSB1X 2 M6 x 1 35SSLA3X 3 M6 x 1 40SSLA4X 4 M6 x 1 45SSLA5X 5 M6 x 1 60SSLA6X 6 M6 x 1 70

TUBE FITTING PART #

GROUP #

D (mm)

E (mm)

F (mm)

APLA0X 0 — 58 44APLA1X 1 20 64 50APLA2X 2 26 70 56APLA3X 3 33 78 64APLA4X 4 40 87 73APLA5X 5 52 100 86APLA6X 6 66 116 100

TUBE FITTING PART #

GROUP #

D (mm)

L (mm)

ISA0X 0,1 M6 x 1 20ISA2X 2 M6 x 1 25ISA3X 3 M6 x 1 30ISA4X 4 M6 x 1 35ISA5X 5 M6 x 1 50ISA6X 6 M6 x 1 60

TUBE FIT-TING PART #

GROUP #

D (mm)

E (mm)

APKA0X 0 — 30APKA1X 1 20 36APKA2X 2 26 42APKA3X 3 33 50APKA4X 4 40 59APKA5X 5 52 72APKA6X 6 66 88

TUBE FITTING PART #

GROUP #

A (mm)

D (mm)

E (mm)

APDA0X 0 30 — 61APDA1X 1 35 20 69APDA2X 2 43 26 86APDA3X 3 52 33 104APDA4X 4 60 40 117APDA5X 5 75 52 145APDA6X 6 90 66 176

Thickness 3 mm

Thickness 3 mm

Thickness 3 mm


P6

Metric Clamps

4300 Catalog



DPATop Plate

SBALocking Plate

TSMounting Rail

TMALock Nut

APWAWeld Plate – Angled

USALocking Washer

ASAStacking Bolts

APRAWeld Plate – Strip

TUBE FITTING PART #

GROUP #

A (mm)

B (mm)

D (mm)

ASA0X 0,1 20 34 M6 x 1ASA2X 2 25 39 M6 x 1ASA3X 3 30 44 M6 x 1ASA4X 4 35 49 M6 x 1ASA5X 5 50 64 M6 x 1ASA6X 6 60 74 M6 x 1

TUBE FITTING PART #

GROUP #

D (mm)

E (mm)

APWA0X 0 14 30APWA1X 1 20 36APWA2X 2 26 42APWA3X 3 33 50APWA4X 4 40 59APWA5X 5 52 72APWA6X 6 66 88

TUBE FITTING PART #

GROUP #

H (mm)

LENGTH (meter)

TS11A/B1X ALL 11 1TS14A/B1X ALL 14 1TS30A/B1X ALL 30 1TS11A/B2X ALL 11 2TS14A/B2X ALL 14 2TS30A/B2X ALL 30 2

TUBE FITTING PART #

GROUP #

A (mm)

B (mm)

C (mm)

M (mm)

TMA/TMB1VERZX ALL 25.4 10.4 12 M6 X 1

TUBE FITTING PART #

GROUP #

D (mm)

A (mm)

E (mm)

NUMBER OF

CLAMPSAPRA0X 0 — 30 298 10APRA1X 1 20 35 349 10APRA2X 2 26 43 427 10APRA3X 3 33 52 516 10APRA4X 4 40 60 297 5APRA5X 5 52 75 370 5APRA6X 6 66 90 446 5

TUBE FITTING PART #

GROUP #

B (mm)

D (mm)

DPA0X 0 0 —DPA1X 1 34 20DPA2X 2 40 26DPA3X 3 48 33DPA4X 4 57 40DPA5X 5 70 52DPA6X 6 86 66

TUBE FITTING PART #

GROUP #

A (mm)

SW (mm)

SBAX ALL 30 11

TUBE FITTING PART #

GROUP #

A (mm)

B (mm)

USA/IS1X ALL 9 18

Thickness 3 mm

Thickness 3 mm

Thickness 3 mm

Groups 1-6


P7

Metric Clamps

4300 Catalog


Heavy Series – High Mechanical Stress

RCP / RCN / RCA / RCPDClamp Halves

Material codes for clamp halves:Polypropylene - RCPinside plain - RCPG (for hose)Polyamide 6 - RCNAluminum - RCA

RCP RCPD(2 pairs of RCP)

TUBE FITTING PART #

GROUP #

A Metric Tube Size

A Inch Pipe Size

A Inch Tube Size

B (mm)

C (mm)

D (mm)

E (mm)

F (mm)

RCP108X 8 5/16RCP110X 10 1/8RCP112X 12RCP113.5X 13.5 1/4RCP114X 1 14 55 32 33 16 30RCP115X 15RCP116X 16 5/8RCP117.2X 17.2 3/8RCP118X 18RCP220X 20RCP221.3X 21.3 1/2RCP222X 22RCP223X 2 23 70 48 45 24 30RCP225X 25 1RCP226.9X 26.9 3/4RCP228X 28RCP330X 30RCP332X 32 1 1/4RCP333.7X 33.7 1RCP335X 3 35 85 60 60 30 30RCP338X 38 1 1/2RCP340X 40RCP342X 42 1 1/4RCP438X 38 1 1/2RCP440X 40RCP442X 42 1 1/4RCP445X 45RCP448.3X 48.3 1 1/2RCP450X 4 50 115 90 90 45 45RCP451X 51 2RCP452X 52RCP455X 55RCP457X 57 2 1/4RCP460.3X 60.3 2RCP463X 63 2 1/2RCP465X 65RCP470X 70RCP570X 70RCP576.1X 76.1 2 1/2 3RCP580X 5 80 152 120 122 60 60RCP582.5X 82.5 3 1/4RCP588.9X 88.9 3 3 1/2RCP690X 90RCP6101.6X 101.6 3 1/2 4RCP6108X 6 108 4 1/4 205 170 168 85 80RCP6114.3X 114.3 4 4 1/2RCP6127X 127 5RCP7127X 127 5RCP7133X 133 5 1/4RCP7140X 140 5 5 1/2RCP7152.4X 7 152.4 5 1/2 6 250 200 205 100 90RCP7159X 159 6 1/4RCP7165.1X 165.1 6 6 1/2RCP7168.3X 168.3 6 5/8RCP8168.3X 168.3 6 5/8RCP8177.8X 8 177.8 7 320 270 265 135 120RCP8193.7X 193.7 7 5/8RCP8219.1X 219.1 8 8 5/8

2XF


P8

Metric Clamps

4300 Catalog


TUBE FITTING PART #

GROUP #

D (mm)

L (mm)

SSC1X 1 M10 x 1 45SSC2X 2 M10 x 1 60SSC3X 3 M10 x 1 70SSC4X 4 M12 x 1.5 100SSC5X 5 M16 x 2 130SSC6X 6 M20 x 2 190SSC7X 7 M24 x 2 220SSC8X 8 M30 x 2 300


SSCHex Head Bolts

ISCCap Screws

ASCStacking Bolts

APCWeld Plate

APDCDouble Weld Plate

APLCWeld / Screw Plate

TUBE FITTING PART #

GROUP #

M (mm)

SW (mm)

A (mm)

B(mm)

ASC1X 1 M10 x 1 15 25 51ASC2X 2 M10 x 1 15 40 66ASC3X 3 M10 x 1 15 50 76ASC4X 4 M12 x 1.5 17 85 112ASC5X 5 M16 x 2 21 110 146ASC6X 6 M20 x 2 27 155 206ASC7X 7 M24 x 2 30 185 245ASC8X 8 M30 x 2 36 250 330

TUBE FITTING PART #

GROUP #

D (mm)

L (mm)

SW (mm)

ISC1X 1 M10 x 1 45 8ISC2X 2 M10 x 1 60 8ISC3X 3 M10 x 1 70 8ISC4X 4 M12 x 1.5 100 10ISC5X 5 M16 x 2 130 14ISC6X 6 M20 x 2 190 17ISC7X 7 M24 x 2 220 19ISC8X 8 M30 x 2 300 22

TUBE FITTING PART #

GROUP #

D (mm)

F (mm)

G (mm)

I (mm)

M (mm)

APC1X 1 33 30 73 8 M10 x 1APC2X 2 45 30 85 8 M10 x 1APC3X 3 60 30 100 8 M10 x 1APC4X 4 90 45 140 10 M12 x 1.5APC5X 5 122 60 180 10 M16 x 2APC6X 6 168 80 225 15 M20 x 2APC7X 7 205 90 270 15 M24 x 2APC8X 8 265 120 340 25 M30 x 2

TUBE FITTING PART #

GROUP #

D (mm)

F (mm)

G (mm)

I (mm)

M (mm)

APDC1X 1 33 60 73 8 M10 x 1APDC2X 2 45 60 85 8 M10 x 1APDC3X 3 60 60 100 8 M10 x 1APDC4X 4 90 90 140 10 M12 x 1.5APDC5X 5 122 120 180 10 M16 x 2APDC6X 6 168 160 225 15 M20 x 2APDC7X 7 205 180 270 15 M24 x 2APDC8X 8 265 240 340 25 M30 x 2

TUBE FITTING PART #

GROUP #

F (mm)

G (mm)

I (mm)

K (mm)

N (mm)

APLC1X 1 30 113 8 85 11APLC2X 2 30 125 8 97 11APLC3X 3 30 140 8 112 11APLC4X 4 45 190 10 160 14APLC5X 5 60 240 10 205 18APLC6X 6 80 310 15 270 22APLC7X 7 90 370 15 320 26APLC8X 8 120 450 25 390 33


P9

Metric Clamps

4300 Catalog



DPCTop Plate

DPDCDouble Top Plate

TMCLock Nut

SPCLocking Plate

TSCMounting Rail

USCLocking Washer

TUBE FITTING PART #

GROUP #

B (mm)

H (mm)

LENGTH (meter)

TSC1X ALL 40 22 1TSC2X ALL 40 22 2

TUBE FITTING PART #

GROUP #

B (mm)

D (mm)

M (mm)

TMC1X 1-3 20 17.8 M10 x 1TMC4X 4 23 19.8 M12 x 1.5

TUBE FITTING PART #

GROUP #

B (mm)

D (mm)

F (mm)

I (mm)

M (mm)

DPC1X 1 55 33 30 8 11DPC2X 2 70 45 30 8 11DPC3X 3 85 60 30 8 11DPC4X 4 115 90 45 10 14DPC5X 5 152 122 60 10 18DPC6X 6 205 168 80 15 22DPC7X 7 250 205 90 15 26DPC8X 8 320 265 120 25 33

TUBE FITTING PART #

GROUP #

B (mm)

D (mm)

F (mm)

I (mm)

M (mm)

DPDC1X 1 55 33 60 8 11DPDC2X 2 70 45 60 8 11DPDC3X 3 85 60 60 8 11DPDC4X 4 115 90 90 10 14DPDC5X 5 152 122 120 10 18DPDC6X 6 205 168 160 15 22DPDC7X 7 250 205 180 15 26DPDC8X 8 320 265 240 25 33

TUBE FITTING PART #

GROUP #

A (mm)

B (mm)

C (mm)

D (mm)

E (mm)

SPC1X 1 55 30 8 14 15.5SPC2X 2 70 30 8 26 15.5SPC3X 3 85 30 8 41 15.5SPC4X 4 115 45 10 69 17.5SPC5X 5 152 60 10 97 21.5SPC6X 6 205 80 15 137 27.5SPC7X 7 250 90 15 169 30.5SPC8X 8 320 120 25 219 36.5

TUBE FITTING PART #

GROUP #

A (mm)

B (mm)

USC1X 1,2,3 13 22USC4X 4 15 28USC5X 5 18 32USC6X 6 21 36USC7X 7 25 42USC8X 8 32 52

D


P10

Metric Clamps

4300 Catalog


Twin Series – Normal Mechanical Stress

RBP / RBNClamp Halves

Material codes for clamp halves:Polypropylene - RBPinside plain - RBPG (for hose)Polyamide 6 - RBNWidth 30 mm

SSBHex Head Bolt

ISBCap Screws

TUBE FITTING PART #

GROUP #

A Metric Tube Size

A Inch Pipe Size

A Inch Tube Size

B (mm)

C (mm)

D (mm)

E (mm)

RBP106X 6RBP106.4X 6.4 1/4RBP108X 1 8 5/16 36 27 20 13.5RBP109.5X 9.5 3/8RBP110X 10 1/8RBP112X 12RBP212.7X 12.7 1/2RBP213.5X 13.5 1/4RBP214X 14RBP215X 2 15 5/8 53 26 29 13RBP216X 16RBP217.2X 17.2 3/8RBP218X 18RBP319X 19 3/4RBP320X 20RBP321.3X 3 21.3 1/2 67 37 36 18.5RBP322X 22RBP325X 25 1RBP426.9X 26.9 3/4RBP428X 4 28 82 42 45 21RBP430X 30RBP532X 32 1 1/4RBP533.7X 33.7 1RBP535X 5 35 106 54 56 27RBP538X 38 1 1/2RBP542X 42 1 1/4

TUBE FITTING PART #

GROUP #

D (mm)

L (mm) MATERIAL

SSLA2/SSB1X 1 M6 x 1 35 ·SSB2X 2 M8 x 1 35 ·SSB3X 3 M8 x 1 45 ·SSB4X 4 M8 x 1 50 ·SSB5X 5 M8 x 1 60 ·

TUBE FITTING PART #

GROUP #

D (mm)

L (mm) MATERIAL

ISB1X 1 M6 x 1 35 ·ISB2X 2 M8 x 1 35 ·ISB3X 3 M8 x 1 45 ·ISB4X 4 M8 x 1 50 ·ISB5X 5 M8 x 1 60 ·


P11

Metric Clamps

4300 Catalog


Twin Series – Normal Mechanical Stress

ASBStacking Bolts

APBWeld Plate

APRBWeld Plate – Strip

DPBTop Plate

TSMounting Rail

TMBLock Nut

SBBLocking Plate

USLocking Washer

TUBE FITTING PART #

GROUP #

D (mm)

A (mm)

B (mm)

SW (mm)

ASB1X 1 M6 x 1 20 34 11ASB2X 2 M8 x 1 20 33 12ASB3X 3 M8 x 1 29 44 12ASB4X 4 M8 x 1 34 49 12ASB5X 5 M8 x 1 47 62 12

THICKNESS

TUBE FITTING PART #

GROUP #

G (mm)

M (mm)

3 APB1X 1 37 M6 x 15 APB2X 2 55 M8 x 15 APB3X 3 70 M8 x 15 APB4X 4 85 M8 x 15 APB5X 5 110 M8 x 1

TUBE FITTING PART #

GROUP #

B (mm)

D (mm)

DPB1X 1 34 6.6DPB2X 2 51 8.6DPB3X 3 64 8.6DPB4X 4 78 8.6DPB5X 5 102 8.6

THICKNESS

TUBE FITTING PART #

GROUP #

D (mm)

E (mm)

3 APRB1X 1 40 1965 APRB2X 2 58 2885 APRB3X 3 72 3585 APRB4X 4 90 4465 APRB5X 5 112 558

TUBE FITTING PART #

GROUP #

SW (mm)

SBB1X 1 11SBB2X 2-5 12

TUBE FITTING PART #

GROUP #

A (mm)

B (mm)

USA/USB1X 1 9 18USB2X 2-5 11 20

TUBE FITTING PART #

GROUP #

B (mm)

H (mm)

LENGTH (meter)

TS11A/B1X ALL 28 11 1TS14A/B1X ALL 28 14 1TS30A/B1X ALL 28 30 1TS11A/B2X ALL 28 11 2TS14A/B2X ALL 28 14 2TS30A/B2X ALL 28 30 2

TUBE FITTING PART #

GROUP #

A (mm)

B (mm)

C (mm)

M (mm)

TMA/TMB1VERZX 1 25.4 10.4 12 M6 x 1TMB2X 2-5 25.4 10.4 12 M8 x 1


P12

Metric Clamps

4300 Catalog

Metric Clamps - penhose.capenhose.ca/shared/media/products/83/pdf/143/metricclamps.pdf · Metric...

Documents

Transcript of Metric Clamps - penhose.capenhose.ca/shared/media/products/83/pdf/143/metricclamps.pdf · Metric...